ira/wip.git
10 years agoImprove upgrade instructions
Andrew Bartlett [Tue, 1 Dec 2009 02:03:17 +0000 (13:03 +1100)]
Improve upgrade instructions

10 years agoThis is alpha9
Andrew Bartlett [Tue, 1 Dec 2009 01:27:09 +0000 (12:27 +1100)]
This is alpha9

10 years agos4:setup Adjust upgradeprovision blackbox test now we don't have --targetdir
Andrew Bartlett [Mon, 30 Nov 2009 22:04:21 +0000 (09:04 +1100)]
s4:setup Adjust upgradeprovision blackbox test now we don't have --targetdir

10 years agos4: Remove targetdir as it can cause some trouble and can be replaced by an adapted...
Matthieu Patou [Sun, 29 Nov 2009 16:44:08 +0000 (19:44 +0300)]
s4: Remove targetdir as it can cause some trouble and can be replaced by an adapted -s smb.conf

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
10 years agos4: Handle the case in secrets.ldb without name attribute
Matthieu Patou [Sun, 29 Nov 2009 13:26:31 +0000 (16:26 +0300)]
s4: Handle the case in secrets.ldb without name attribute

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
10 years agos4: don't forget to update defaultSecurityDescriptor
Matthieu Patou [Sat, 28 Nov 2009 23:28:26 +0000 (02:28 +0300)]
s4: don't forget to update defaultSecurityDescriptor

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
10 years agos4: load the domain level of the current provision and create a provision with the...
Matthieu Patou [Fri, 27 Nov 2009 17:50:04 +0000 (20:50 +0300)]
s4: load the domain level of the current provision and create a provision with the same domain level

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
10 years agos4:ldap.py Add test of namingContext behaviour after tridge found a bug
Andrew Bartlett [Mon, 30 Nov 2009 07:39:58 +0000 (18:39 +1100)]
s4:ldap.py Add test of namingContext behaviour after tridge found a bug

Tridge found that the partitions.c module was being initialised twice,
and setting the partitions into the rootDSE twice.

Andrew Bartlett

10 years agos4:WHATSNEW Nadezhda's acl module handles modifies
Andrew Bartlett [Mon, 30 Nov 2009 03:46:03 +0000 (14:46 +1100)]
s4:WHATSNEW Nadezhda's acl module handles modifies

10 years agoFix DEBUG 0 -> DEBUG 10 (left over code).
Jeremy Allison [Tue, 1 Dec 2009 00:56:35 +0000 (16:56 -0800)]
Fix DEBUG 0 -> DEBUG 10 (left over code).
Fix opendir status return if access denied.
Jeremy.

10 years agoFix bug 6938 : No hook exists to check creation rights when using acl_xattr module
Jeremy Allison [Tue, 1 Dec 2009 00:50:34 +0000 (16:50 -0800)]
Fix bug 6938 : No hook exists to check creation rights when using acl_xattr module
Fix ACL modules to test for permissions on open/mkdir/opendir.
Ensure that underlying ACLs are returned for directories/files with
no Windows xattr or tdb acls stored.
Jeremy.

10 years agos3-build: taise tdb version when building against system libtdb library.
Günther Deschner [Tue, 1 Dec 2009 00:22:44 +0000 (01:22 +0100)]
s3-build: taise tdb version when building against system libtdb library.

Try to fix the build on "buildsamba02". At least fixes the build on fedora12
with libtdb-devel-1.1.5-2.fc12.x86_64 installed.

Volker, please check.

Guenther

10 years agos3:add split_tokens, a cmdline tool to test next_token_talloc()
Michael Adam [Mon, 30 Nov 2009 23:53:03 +0000 (00:53 +0100)]
s3:add split_tokens, a cmdline tool to test next_token_talloc()

Michael

10 years agos3:fix linking of the t_str* test programs
Michael Adam [Fri, 20 Nov 2009 17:25:27 +0000 (18:25 +0100)]
s3:fix linking of the t_str* test programs

Michael

10 years agos3:fix linking of libbigballofmud (on my box at least)
Michael Adam [Fri, 20 Nov 2009 17:24:53 +0000 (18:24 +0100)]
s3:fix linking of libbigballofmud (on my box at least)

Michael

10 years agos3:torture: make t_stringoverflow.c compile at least (pstring is long gone)
Michael Adam [Fri, 20 Nov 2009 16:48:18 +0000 (17:48 +0100)]
s3:torture: make t_stringoverflow.c compile at least (pstring is long gone)

I don't know whether these t_* programs are used at all any more, but this
one was using pstrcpy...

Michael

10 years agoRestructure the connect function code to always call
Jeremy Allison [Mon, 30 Nov 2009 23:53:04 +0000 (15:53 -0800)]
Restructure the connect function code to always call
down to NEXT-> before initializing. This allows us to
do cleanup (by calling DISCONNECT) if initialization
fails. Also fix vfs_acl_xattr which was failing to
call the NEXT connect function.
Jeremy.

10 years agodrsuapi: fix build warning of NDR size calculation of drsuapi_DsReplicaObjectIdentifi...
Günther Deschner [Mon, 30 Nov 2009 23:24:16 +0000 (00:24 +0100)]
drsuapi: fix build warning of NDR size calculation of drsuapi_DsReplicaObjectIdentifier3Binary.

The generated size actually does not include the size of the binary itself.

Guenther

10 years agos3-spoolss: fix fstrings in convert_devicemode() function.
Günther Deschner [Mon, 30 Nov 2009 17:10:59 +0000 (18:10 +0100)]
s3-spoolss: fix fstrings in convert_devicemode() function.

Guenther

10 years agoFix bug 6546: Avoid accessing buf[-1] if NUL byte comes from fgets
Volker Lendecke [Mon, 30 Nov 2009 20:48:33 +0000 (21:48 +0100)]
Fix bug 6546: Avoid accessing buf[-1] if NUL byte comes from fgets

10 years agos3:docs: Fix typo in man mount.cifs.
Karolin Seeger [Mon, 30 Nov 2009 13:53:23 +0000 (14:53 +0100)]
s3:docs: Fix typo in man mount.cifs.

Fix bug #6844 (wrong credential file format in mount.cifs manpage).
Thanks to the Debian Samba package maintainers for reporting!

Karolin

10 years agos3:docs: Document "aio write behind".
Karolin Seeger [Mon, 30 Nov 2009 12:34:34 +0000 (13:34 +0100)]
s3:docs: Document "aio write behind".

Part of a fix for bug #6890 (Some smb.conf parameters are undocumented).

Karolin

10 years agos3:docs: Document "ldap page size".
Karolin Seeger [Mon, 30 Nov 2009 11:29:27 +0000 (12:29 +0100)]
s3:docs: Document "ldap page size".

Part of a fix for bug #6890 (Some smb.conf parameters are undocumented).

Karolin

10 years agos3: Fix crash in free_file_list().
Bo Yang [Mon, 30 Nov 2009 09:30:25 +0000 (17:30 +0800)]
s3: Fix crash in free_file_list().

Signed-off-by: Bo Yang <boyang@samba.org>
10 years agos3:docs: Document "enable core files".
Karolin Seeger [Mon, 30 Nov 2009 10:40:06 +0000 (11:40 +0100)]
s3:docs: Document "enable core files".

Part of a fix for bug #6890 (Some smb.conf parameters are undocumented).

Karolin

10 years agos4-drs: Test situations for runtime constructed parentGUID
Fernando J V da Silva [Fri, 27 Nov 2009 14:25:18 +0000 (12:25 -0200)]
s4-drs: Test situations for runtime constructed parentGUID

Includes the following verifications for the constructed parentGUID:
- Checks if it returns nothing when there is no parent object
- Ensures that attributes mentioned after the parentGUID
are returned correctly (this avoid a bug pointed out by Tridge
during sync constructed parentGUID development)

Signed-off-by: Andrew Tridgell <tridge@samba.org>
10 years agos4-drs: Using dsdb_msg_add_guid() utility function
Fernando J V da Silva [Wed, 25 Nov 2009 20:01:55 +0000 (17:01 -0300)]
s4-drs: Using dsdb_msg_add_guid() utility function

Uses the dsdb_msg_add_guid() to add any kind of GUID attribute
to a ldb_message in several places of samba4 code.

Signed-off-by: Andrew Tridgell <tridge@samba.org>
10 years agos3:docs: Document "cache directory" and "state directory".
Karolin Seeger [Mon, 30 Nov 2009 10:04:50 +0000 (11:04 +0100)]
s3:docs: Document "cache directory" and "state directory".

Part of a fix for bug #6890 (Some smb.conf parameters are undocumented).

Karolin

10 years agos3: Fix bug 6288
Volker Lendecke [Sun, 29 Nov 2009 22:31:45 +0000 (23:31 +0100)]
s3: Fix bug 6288

10 years agos4-drs: add deletion of old connections
Crístian Deives [Mon, 30 Nov 2009 09:12:24 +0000 (20:12 +1100)]
s4-drs: add deletion of old connections

the nTDSConnection objects that are not needed anymore will be deleted.
the function kccsrv_delete_connection wasn't tested yet.

Signed-off-by: Andrew Tridgell <tridge@samba.org>
10 years agos4-ldb: changed ldb_msg_add_dn() to ldb_msg_add_linearized_dn()
Crístian Deives [Mon, 23 Nov 2009 17:47:51 +0000 (15:47 -0200)]
s4-ldb: changed ldb_msg_add_dn() to ldb_msg_add_linearized_dn()

this makes the usage clearer

Signed-off-by: Andrew Tridgell <tridge@samba.org>
10 years agos4-drs: Create connection obejct (nTDSConnection)
Crístian Deives [Mon, 30 Nov 2009 09:11:27 +0000 (20:11 +1100)]
s4-drs: Create connection obejct (nTDSConnection)

create nTDSConnection objects to match the list of servers

Signed-off-by: Andrew Tridgell <tridge@samba.org>
10 years agos4-ldb: check for -ve value for page size
Andrew Tridgell [Mon, 30 Nov 2009 06:47:56 +0000 (17:47 +1100)]
s4-ldb: check for -ve value for page size

This comes from a tip from Howard Chu. Apparently some clients
will send a -ve page size value.

10 years agos4-dsdb: don't call ldb_next_init() twice in objectclass module
Andrew Tridgell [Mon, 30 Nov 2009 05:48:31 +0000 (16:48 +1100)]
s4-dsdb: don't call ldb_next_init() twice in objectclass module

10 years agos3: Fix a "not handled in switch" warning
Volker Lendecke [Sun, 29 Nov 2009 22:42:44 +0000 (23:42 +0100)]
s3: Fix a "not handled in switch" warning

10 years agos3: Fix an uninitialized variable reference
Volker Lendecke [Sun, 29 Nov 2009 21:57:19 +0000 (22:57 +0100)]
s3: Fix an uninitialized variable reference

10 years agos3: Fix some nonempty blank lines
Volker Lendecke [Sun, 29 Nov 2009 21:23:22 +0000 (22:23 +0100)]
s3: Fix some nonempty blank lines

10 years agos3: Add a regression test for bug 6898
Volker Lendecke [Sun, 29 Nov 2009 15:05:36 +0000 (16:05 +0100)]
s3: Add a regression test for bug 6898

10 years agos3: Factor out torture_setup_unix_extensions
Volker Lendecke [Sun, 29 Nov 2009 15:04:21 +0000 (16:04 +0100)]
s3: Factor out torture_setup_unix_extensions

10 years agolib/registry/util.c - Reorder the registry datatypes of the conversion functions
Matthias Dieter Wallnöfer [Sun, 29 Nov 2009 13:55:20 +0000 (14:55 +0100)]
lib/registry/util.c - Reorder the registry datatypes of the conversion functions

This is absolutely cosmetic and makes the code easier to comprehend.

10 years agoRevert "s4:registry/util - Don't include the trailing '\0' in the internal data forma...
Matthias Dieter Wallnöfer [Sun, 29 Nov 2009 13:42:31 +0000 (14:42 +0100)]
Revert "s4:registry/util - Don't include the trailing '\0' in the internal data format but add it on the back-conversion to a string"

This reverts commit 7d400715e9af2056690c03a1a2f45c7f343fa313.

"convert_string_talloc_convenience" does always add the NULL termination. Didn't
know that. Thanks Jelmer for pointing out!

10 years agos3: Restore "fake directory create times" as a share parameter
Volker Lendecke [Fri, 27 Nov 2009 14:44:50 +0000 (15:44 +0100)]
s3: Restore "fake directory create times" as a share parameter

10 years agos3: "copy_reg" only looks at mode, uid, gid, atime and mtime (no birthtime)
Volker Lendecke [Fri, 27 Nov 2009 14:10:23 +0000 (15:10 +0100)]
s3: "copy_reg" only looks at mode, uid, gid, atime and mtime (no birthtime)

10 years agos3: Pass up fake_dir_create_times from atalk_build_paths
Volker Lendecke [Fri, 27 Nov 2009 13:58:46 +0000 (14:58 +0100)]
s3: Pass up fake_dir_create_times from atalk_build_paths

The callers only look at the mode

10 years agos3: Move directory_exist_stat to testparm.c, it only looks at the mode
Volker Lendecke [Fri, 27 Nov 2009 12:19:30 +0000 (13:19 +0100)]
s3: Move directory_exist_stat to testparm.c, it only looks at the mode

10 years agos3: Pass fake_dir_create_times down to file_exist_stat, none of the callers look...
Volker Lendecke [Fri, 27 Nov 2009 12:17:05 +0000 (13:17 +0100)]
s3: Pass fake_dir_create_times down to file_exist_stat, none of the callers look at the mtime

10 years agos3: "startsmbfilepwent" only looks at the inode -- is that enough?
Volker Lendecke [Fri, 27 Nov 2009 12:12:40 +0000 (13:12 +0100)]
s3: "startsmbfilepwent" only looks at the inode -- is that enough?

10 years agos3: "get_file_size" only looks at the size
Volker Lendecke [Fri, 27 Nov 2009 12:11:17 +0000 (13:11 +0100)]
s3: "get_file_size" only looks at the size

10 years agos3: "socket_exist" only looks at the mode
Volker Lendecke [Fri, 27 Nov 2009 12:10:48 +0000 (13:10 +0100)]
s3: "socket_exist" only looks at the mode

10 years agos3: "sys_path_to_bdev" only looks at the devicenumber
Volker Lendecke [Fri, 27 Nov 2009 12:08:51 +0000 (13:08 +0100)]
s3: "sys_path_to_bdev" only looks at the devicenumber

10 years agos3: "check_log_size" only looks at the size
Volker Lendecke [Fri, 27 Nov 2009 12:07:54 +0000 (13:07 +0100)]
s3: "check_log_size" only looks at the size

10 years agos3: "regf_hbin_allocate" only looks at the size
Volker Lendecke [Fri, 27 Nov 2009 12:07:12 +0000 (13:07 +0100)]
s3: "regf_hbin_allocate" only looks at the size

10 years agos3: "read_block" only looks at the size
Volker Lendecke [Fri, 27 Nov 2009 12:06:44 +0000 (13:06 +0100)]
s3: "read_block" only looks at the size

10 years agos3: "write_block" does not use the sbuf at all
Volker Lendecke [Fri, 27 Nov 2009 12:06:14 +0000 (13:06 +0100)]
s3: "write_block" does not use the sbuf at all

10 years agos3: "net_conf_addshare" only looks at the mode
Volker Lendecke [Fri, 27 Nov 2009 12:05:16 +0000 (13:05 +0100)]
s3: "net_conf_addshare" only looks at the mode

10 years agos3: "net_usershare_add" only looks at the mode, device and inode
Volker Lendecke [Fri, 27 Nov 2009 12:04:38 +0000 (13:04 +0100)]
s3: "net_usershare_add" only looks at the mode, device and inode

10 years agos3: "net_usershare_add" only looks at the device and inode
Volker Lendecke [Fri, 27 Nov 2009 12:04:18 +0000 (13:04 +0100)]
s3: "net_usershare_add" only looks at the device and inode

10 years agos3: "net_usershare_add" only looks at the mode and uid
Volker Lendecke [Fri, 27 Nov 2009 12:03:09 +0000 (13:03 +0100)]
s3: "net_usershare_add" only looks at the mode and uid

10 years agos3: "count_num_usershares" only looks at the mode
Volker Lendecke [Fri, 27 Nov 2009 12:02:26 +0000 (13:02 +0100)]
s3: "count_num_usershares" only looks at the mode

10 years agos3: "info_fn" only looks at the mode and uid
Volker Lendecke [Fri, 27 Nov 2009 12:01:46 +0000 (13:01 +0100)]
s3: "info_fn" only looks at the mode and uid

10 years agos3: "get_share_list" only looks at the mode and uid
Volker Lendecke [Fri, 27 Nov 2009 12:00:51 +0000 (13:00 +0100)]
s3: "get_share_list" only looks at the mode and uid

10 years agos3: "cgi_download" only looks at the mode and size
Volker Lendecke [Fri, 27 Nov 2009 12:00:10 +0000 (13:00 +0100)]
s3: "cgi_download" only looks at the mode and size

10 years agos3: "print_job_end" only looks at the size
Volker Lendecke [Fri, 27 Nov 2009 11:59:11 +0000 (12:59 +0100)]
s3: "print_job_end" only looks at the size

10 years agos3: "check_magic" only looks at the size
Volker Lendecke [Fri, 27 Nov 2009 11:58:26 +0000 (12:58 +0100)]
s3: "check_magic" only looks at the size

10 years agos3: "disk_quotas" only looks at the devicenumber
Volker Lendecke [Fri, 27 Nov 2009 11:57:43 +0000 (12:57 +0100)]
s3: "disk_quotas" only looks at the devicenumber

10 years agos3: "load_usershare_shares" only looks at the mode and uid
Volker Lendecke [Fri, 27 Nov 2009 11:53:48 +0000 (12:53 +0100)]
s3: "load_usershare_shares" only looks at the mode and uid

10 years agos3: "load_usershare_service" only looks at the mode and uid
Volker Lendecke [Fri, 27 Nov 2009 11:53:23 +0000 (12:53 +0100)]
s3: "load_usershare_service" only looks at the mode and uid

10 years agos3: "usershare_exists" only looks at the mode and mtime
Volker Lendecke [Fri, 27 Nov 2009 11:52:31 +0000 (12:52 +0100)]
s3: "usershare_exists" only looks at the mode and mtime

10 years agos3: "process_usershare_file" only looks at the dev, ino, mode and size
Volker Lendecke [Fri, 27 Nov 2009 11:51:56 +0000 (12:51 +0100)]
s3: "process_usershare_file" only looks at the dev, ino, mode and size

10 years agos3: "process_usershare_file" only looks at the mode and size
Volker Lendecke [Fri, 27 Nov 2009 11:51:04 +0000 (12:51 +0100)]
s3: "process_usershare_file" only looks at the mode and size

10 years agos3: "parse_usershare_file" only looks at the mode and uid
Volker Lendecke [Fri, 27 Nov 2009 11:49:42 +0000 (12:49 +0100)]
s3: "parse_usershare_file" only looks at the mode and uid

10 years agos3: "tar_parseargs" only looks at the mtime
Volker Lendecke [Fri, 27 Nov 2009 11:48:33 +0000 (12:48 +0100)]
s3: "tar_parseargs" only looks at the mtime

10 years agos3: "dotareof" only looks at the file type
Volker Lendecke [Fri, 27 Nov 2009 11:47:57 +0000 (12:47 +0100)]
s3: "dotareof" only looks at the file type

10 years agos3: client "newer" does not look at the create timestamp
Volker Lendecke [Fri, 27 Nov 2009 11:44:33 +0000 (12:44 +0100)]
s3: client "newer" does not look at the create timestamp

10 years agos3: Pass the "fake dir create times" parameter to sys_*stat
Volker Lendecke [Fri, 27 Nov 2009 11:42:39 +0000 (12:42 +0100)]
s3: Pass the "fake dir create times" parameter to sys_*stat

Step 0 to restore it as a per-share paramter

10 years agos4:upgrade_from_s3 - Move it back to "setup"
Matthias Dieter Wallnöfer [Sat, 28 Nov 2009 18:23:08 +0000 (19:23 +0100)]
s4:upgrade_from_s3 - Move it back to "setup"

Suggested by Jelmer

10 years agos4:setup/provision - Rework
Matthias Dieter Wallnöfer [Sat, 28 Nov 2009 16:03:57 +0000 (17:03 +0100)]
s4:setup/provision - Rework

- Revert change in "ask" - was previously correct
- Readd accidentally removed checks for non-null realm and domainname
- On interactive mode perform only one "ask" call per question
- Inform the user about the unset administrator password

10 years agos4:upgrade.py - remove my copyright
Matthias Dieter Wallnöfer [Sat, 28 Nov 2009 17:48:47 +0000 (18:48 +0100)]
s4:upgrade.py - remove my copyright

First I wanted to add also other changes but then I didn't introduce them.
Therefore remove my copyright again.

10 years agos4:upgrade.py - readd accidentally removed empty lines
Matthias Dieter Wallnöfer [Sat, 28 Nov 2009 15:59:18 +0000 (16:59 +0100)]
s4:upgrade.py - readd accidentally removed empty lines

Jelmer pointed out that this is against the PEP8 norm

10 years agos4:samba3.py/upgrade.py: Revert
Matthias Dieter Wallnöfer [Sat, 28 Nov 2009 14:28:45 +0000 (15:28 +0100)]
s4:samba3.py/upgrade.py: Revert

This reverts commit 2175c0ed0649d545ea833d50e8d33fbee9051c35.
This reverts commit 6c3e2417a0639cd7c367de93615c422cf5217456.
This reverts commit dbb8989e05ac3189a5eca11fa40d572388ea02fc.
This reverts commit 82adfa39b75aa628c88f828278c6ac09335d1a49.
This reverts commit f299efa8f05c6a5b739222bdf75690a4591d3650.

After a small discussion with Jelmer we agreed that this isn't the right way
to fix the problem. We should wait for a real patch rather to rely on temporal
hacks.

10 years agos4-ldb: make it much easier to use common ldb controls
Andrew Tridgell [Sat, 28 Nov 2009 06:35:36 +0000 (17:35 +1100)]
s4-ldb: make it much easier to use common ldb controls

10 years agos4-drs: cope with bogus empty attributes from w2k8-r2
Andrew Tridgell [Sat, 28 Nov 2009 02:27:06 +0000 (13:27 +1100)]
s4-drs: cope with bogus empty attributes from w2k8-r2

w2k8-r2 sometimes sends empty attributes with completely bogus attrid
values in a DRS replication response. This allows us to continue with
the vampire operation despite these broken elements.

10 years agos4: fix SD update and password change in upgrade script
Matthieu Patou [Fri, 27 Nov 2009 14:37:14 +0000 (17:37 +0300)]
s4: fix SD update and password change in upgrade script

- reserve a new Samba OID for recalculate SD control
- fix the update SD function
- fix handling of kvno in the update_machine_account_password function
- fix handling of handles in RPC winreg server

Signed-off-by: Andrew Tridgell <tridge@samba.org>
10 years agos4:WINREG RPC server - add another "talloc_unlink" in "DeleteKey"
Matthias Dieter Wallnöfer [Wed, 18 Nov 2009 07:48:30 +0000 (08:48 +0100)]
s4:WINREG RPC server - add another "talloc_unlink" in "DeleteKey"

Also here we waste memory - therefore free the pointless handle after the delete.

10 years agos4:WINREG RPC server - Reintroduce the free operation on "CloseKey"
Matthias Dieter Wallnöfer [Wed, 18 Nov 2009 09:24:09 +0000 (10:24 +0100)]
s4:WINREG RPC server - Reintroduce the free operation on "CloseKey"

Better use "talloc_unlink" here Since we could have more than one reference.

10 years agos4-smbtorture: more and stricter tests for printer and data keys in RPC-SPOOLSS.
Günther Deschner [Fri, 27 Nov 2009 22:14:27 +0000 (23:14 +0100)]
s4-smbtorture: more and stricter tests for printer and data keys in RPC-SPOOLSS.

Guenther

10 years agos4:provision.py - remove hardcoded SIDs and RIDs
Matthias Dieter Wallnöfer [Fri, 27 Nov 2009 21:39:52 +0000 (22:39 +0100)]
s4:provision.py - remove hardcoded SIDs and RIDs

After rework of the SDDL modules this is possible. In future: Never hardcode
them anymore! Always use the abbreviations.

10 years agos4:security/sddl - rework of the security descriptor abbreviations
Matthias Dieter Wallnöfer [Fri, 27 Nov 2009 21:37:52 +0000 (22:37 +0100)]
s4:security/sddl - rework of the security descriptor abbreviations

- Reoder them
- Add some new ones (needed for the security descriptor in the provision script)

10 years agosecurity.idl - Add some more wellknown SIDs/RIDs
Matthias Dieter Wallnöfer [Fri, 27 Nov 2009 21:36:59 +0000 (22:36 +0100)]
security.idl - Add some more wellknown SIDs/RIDs

10 years agos4:registry/util - Don't include the trailing '\0' in the internal data format but...
Matthias Dieter Wallnöfer [Fri, 27 Nov 2009 20:14:44 +0000 (21:14 +0100)]
s4:registry/util - Don't include the trailing '\0' in the internal data format but add it on the back-conversion to a string

As far as I know the registry library saves all data (including) strings without
the null termination. So do it also here in a similar way.

10 years agos4:net utility - add a notice for the "help" operation and format it's output of...
Matthias Dieter Wallnöfer [Fri, 27 Nov 2009 19:26:17 +0000 (20:26 +0100)]
s4:net utility - add a notice for the "help" operation and format it's output of the command list better

10 years agos3-kerberos: fix the build on Mac OS X 10.6.2.
Günther Deschner [Fri, 27 Nov 2009 19:08:44 +0000 (20:08 +0100)]
s3-kerberos: fix the build on Mac OS X 10.6.2.

Guenther

10 years agos4:samba3.py - deactivate also the assertion on line 599
Matthias Dieter Wallnöfer [Fri, 27 Nov 2009 19:02:25 +0000 (20:02 +0100)]
s4:samba3.py - deactivate also the assertion on line 599

10 years agos3-kerberos: add a missing reference to authdata headers.
Günther Deschner [Fri, 27 Nov 2009 17:51:56 +0000 (18:51 +0100)]
s3-kerberos: add a missing reference to authdata headers.

Guenther

10 years agos3-kerberos: do not include authdata headers before including krb5 headers.
Günther Deschner [Fri, 27 Nov 2009 17:30:18 +0000 (18:30 +0100)]
s3-kerberos: do not include authdata headers before including krb5 headers.

Guenther

10 years agos3-spoolss: simplify _spoolss_EnumPrinterKey a little more.
Günther Deschner [Thu, 26 Nov 2009 18:01:54 +0000 (19:01 +0100)]
s3-spoolss: simplify _spoolss_EnumPrinterKey a little more.

Guenther

10 years agos4:winbind - Fix it another time up
Matthias Dieter Wallnöfer [Fri, 27 Nov 2009 16:45:20 +0000 (17:45 +0100)]
s4:winbind - Fix it another time up

The first fix attempt did break some configurations (incl. "make test").
This now is the right fix with the right comment.

10 years agos4:provision.py - cosmetic
Matthias Dieter Wallnöfer [Fri, 27 Nov 2009 16:39:02 +0000 (17:39 +0100)]
s4:provision.py - cosmetic

10 years agos4:samba3.py (and test) - deactivate the tests until those parameters are fixed
Matthias Dieter Wallnöfer [Fri, 27 Nov 2009 15:39:27 +0000 (16:39 +0100)]
s4:samba3.py (and test) - deactivate the tests until those parameters are fixed

10 years agos4:upgrade.py - Umlaut problem
Matthias Dieter Wallnöfer [Fri, 27 Nov 2009 15:35:28 +0000 (16:35 +0100)]
s4:upgrade.py - Umlaut problem