---- samba-1.9.17/source/Makefile.orig Fri Jul 4 07:22:06 1997
-+++ samba-1.9.17/source/Makefile Fri Jul 4 07:27:17 1997
-@@ -5,16 +5,16 @@
-
- # The base manpages directory to put the man pages in
- # Note: $(MANDIR)/man1, $(MANDIR)/man5 and $(MANDIR)/man8 must exist.
--MANDIR = /usr/local/man
-+MANDIR = /usr/man
-
- # The directories to put things in. If you use multiple
- # architectures or share the samba binaries across NFS then
- # you will probably want to change this layout.
--BASEDIR = /usr/local/samba
--BINDIR = /usr/local/bin
--SBINDIR = $(BASEDIR)/bin
--LIBDIR = $(BASEDIR)/lib
--VARDIR = $(BASEDIR)/var
-+BASEDIR = /usr
-+BINDIR = $(BASEDIR)/bin
-+SBINDIR = $(BASEDIR)/sbin
-+LIBDIR = /etc
-+VARDIR = /var
-
- # The permissions to give the executables
- INSTALLPERMS = 0755
-@@ -23,13 +23,13 @@
- # add -DSYSLOG for syslog support
- # RPM_OPT_FLAGS is needed when building an RPM distribution package
- # for RedHat Linux.
--# FLAGS1 = $(RPM_OPT_FLAGS)
--FLAGS1 = -O
-+FLAGS1 = $(RPM_OPT_FLAGS)
-+# FLAGS1 = -O
- LIBS1 =
-
- # You will need to use a ANSI C compiler. This means under SunOS 4 you can't
- # use cc, instead you will have to use gcc.
--# CC = gcc
-+CC = gcc
-
- # This may help with some versions of make
- SHELL = /bin/sh
-@@ -42,13 +42,13 @@
- # set these to where to find various files
- # These can be overridden by command line switches (see smbd(8))
- # or in smb.conf (see smb.conf(5))
--SMBLOGFILE = $(VARDIR)/log.smb
--NMBLOGFILE = $(VARDIR)/log.nmb
-+SMBLOGFILE = $(VARDIR)/log/log.smb
-+NMBLOGFILE = $(VARDIR)/log/log.nmb
- CONFIGFILE = $(LIBDIR)/smb.conf
- LMHOSTSFILE = $(LIBDIR)/lmhosts
-
- # the directory where lock files go
--LOCKDIR = $(VARDIR)/locks
-+LOCKDIR = $(VARDIR)/lock/samba
-
- # set this to the default group you want your machine to appear in
- # for browsing. This can also be set in nmbd (see nmbd(8))
-@@ -71,8 +71,8 @@
-
- # This is for PAM authentication. RedHat Linux uses PAM.
- # If you use PAM, then uncomment the following lines:
--# PAM_FLAGS = -DUSE_PAM
--# PAM_LIBS = -ldl -lpam
-+PAM_FLAGS = -DUSE_PAM
-+PAM_LIBS = -ldl -lpam
-
- # This is for AFS authentication. If you use AFS then set AFS_BASE
- # according to your system layout, and uncomment the other lines as well.
-@@ -181,8 +181,8 @@
- # contributed by Andrew.Tridgell@anu.edu.au
- # AXPROC defines DEC Alpha Processor
- # FLAGSM = -DLINUX -DAXPROC -DFAST_SHARE_MODES
--# FLAGSM = -DLINUX -DFAST_SHARE_MODES
--# LIBSM =
-+FLAGSM = -DLINUX -DFAST_SHARE_MODES
-+LIBSM =
-
- # Use this for Linux with shadow passwords and quota
- # contributed by xeno@mix.hive.no
+*** samba-1.9.17/source/Makefile.orig Sat Jul 12 12:51:39 1997
+--- samba-1.9.17/source/Makefile Sat Jul 12 12:56:04 1997
+***************
+*** 5,15 ****
+ ###########################################################################
+
+ # The base directory for all samba files
+! BASEDIR = /usr/local/samba
+
+ # The base manpages directory to put the man pages in
+ # Note: $(MANDIR)/man1, $(MANDIR)/man5 and $(MANDIR)/man8 must exist.
+! MANDIR = /usr/local/man
+
+ # The directories to put things in. If you use multiple
+ # architectures or share the samba binaries across NFS then
+--- 5,15 ----
+ ###########################################################################
+
+ # The base directory for all samba files
+! BASEDIR = /usr
+
+ # The base manpages directory to put the man pages in
+ # Note: $(MANDIR)/man1, $(MANDIR)/man5 and $(MANDIR)/man8 must exist.
+! MANDIR = $(BASEDIR)/man
+
+ # The directories to put things in. If you use multiple
+ # architectures or share the samba binaries across NFS then
+***************
+*** 18,26 ****
+ # normally only applies to nmbd and smbd
+ # SBINDIR implies a secure binary directory
+ BINDIR = $(BASEDIR)/bin
+! SBINDIR = $(BASEDIR)/bin
+! LIBDIR = $(BASEDIR)/lib
+! VARDIR = $(BASEDIR)/var
+
+ # The permissions to give the executables
+ INSTALLPERMS = 0755
+--- 18,26 ----
+ # normally only applies to nmbd and smbd
+ # SBINDIR implies a secure binary directory
+ BINDIR = $(BASEDIR)/bin
+! SBINDIR = $(BASEDIR)/sbin
+! LIBDIR = /etc
+! VARDIR = /var
+
+ # The permissions to give the executables
+ INSTALLPERMS = 0755
+***************
+*** 35,41 ****
+
+ # You will need to use a ANSI C compiler. This means under SunOS 4 you can't
+ # use cc, instead you will have to use gcc.
+! # CC = gcc
+
+ # This may help with some versions of make
+ SHELL = /bin/sh
+--- 35,41 ----
+
+ # You will need to use a ANSI C compiler. This means under SunOS 4 you can't
+ # use cc, instead you will have to use gcc.
+! CC = gcc
+
+ # This may help with some versions of make
+ SHELL = /bin/sh
+***************
+*** 48,60 ****
+ # set these to where to find various files
+ # These can be overridden by command line switches (see smbd(8))
+ # or in smb.conf (see smb.conf(5))
+! SMBLOGFILE = $(VARDIR)/log.smb
+! NMBLOGFILE = $(VARDIR)/log.nmb
+ CONFIGFILE = $(LIBDIR)/smb.conf
+ LMHOSTSFILE = $(LIBDIR)/lmhosts
+
+ # the directory where lock files go
+! LOCKDIR = $(VARDIR)/locks
+
+ # set this to the default group you want your machine to appear in
+ # for browsing. This can also be set in nmbd (see nmbd(8))
+--- 48,60 ----
+ # set these to where to find various files
+ # These can be overridden by command line switches (see smbd(8))
+ # or in smb.conf (see smb.conf(5))
+! SMBLOGFILE = $(VARDIR)/log/samba/log.smb
+! NMBLOGFILE = $(VARDIR)/log/samba/log.nmb
+ CONFIGFILE = $(LIBDIR)/smb.conf
+ LMHOSTSFILE = $(LIBDIR)/lmhosts
+
+ # the directory where lock files go
+! LOCKDIR = $(VARDIR)/lock/samba
+
+ # set this to the default group you want your machine to appear in
+ # for browsing. This can also be set in nmbd (see nmbd(8))
+***************
+*** 77,84 ****
+
+ # This is for PAM authentication. RedHat Linux uses PAM.
+ # If you use PAM, then uncomment the following lines:
+! # PAM_FLAGS = -DUSE_PAM
+! # PAM_LIBS = -ldl -lpam
+
+ # This is for AFS authentication. If you use AFS then set AFS_BASE
+ # according to your system layout, and uncomment the other lines as well.
+--- 77,84 ----
+
+ # This is for PAM authentication. RedHat Linux uses PAM.
+ # If you use PAM, then uncomment the following lines:
+! PAM_FLAGS = -DUSE_PAM
+! PAM_LIBS = -ldl -lpam
+
+ # This is for AFS authentication. If you use AFS then set AFS_BASE
+ # according to your system layout, and uncomment the other lines as well.
+***************
+*** 187,194 ****
+ # contributed by Andrew.Tridgell@anu.edu.au
+ # AXPROC defines DEC Alpha Processor
+ # FLAGSM = -DLINUX -DAXPROC -DFAST_SHARE_MODES
+! # FLAGSM = -DLINUX -DFAST_SHARE_MODES
+! # LIBSM =
+
+ # Use this for Linux with shadow passwords and quota
+ # contributed by xeno@mix.hive.no
+--- 187,194 ----
+ # contributed by Andrew.Tridgell@anu.edu.au
+ # AXPROC defines DEC Alpha Processor
+ # FLAGSM = -DLINUX -DAXPROC -DFAST_SHARE_MODES
+! FLAGSM = -DLINUX -DFAST_SHARE_MODES
+! LIBSM =
+
+ # Use this for Linux with shadow passwords and quota
+ # contributed by xeno@mix.hive.no
-; The global setting for a RedHat default install
-; smbd re-reads this file regularly, but if in doubt stop and restart it:
-; /etc/rc.d/init.d/smb stop
-; /etc/rc.d/init.d/smb start
+; The global setting for a default install
+; Copyright(C) John H Terpstra & Jeremy Allison - 1997
;======================= Global Settings =====================================
[global]
workgroup = WORKGROUP
; comment is the equivalent of the NT Description field
- comment = RedHat Samba Server
-
-; volume = used to emulate a CDRom label (can be set on a per share basis)
- volume = RedHat4
+ comment = Samba Server
; printing = BSD or SYSV or AIX, etc.
printing = bsd
printcap name = /etc/printcap
load printers = yes
-; Uncomment this if you want a guest account
+; Uncomment this if you want a guest account, you must add this to /etc/passwd
; guest account = pcguest
- log file = /var/log/samba-log.%m
+ log file = /var/log/samba/log.%m
+
; Put a capping on the size of the log files (in Kb)
max log size = 50
; Security and file integrity related options
lock directory = /var/lock/samba
locking = yes
- strict locking = yes
+; Strict locking is available for paranoid locking situations only
+; enabling this severely degrades read / write performance.
+; strict locking = yes
; fake oplocks = yes
share modes = yes
+
; Security modes: USER uses Unix username/passwd, SHARE uses WfW type passwords
-; SERVER uses a Windows NT Server to provide authentication services
+; SERVER uses an other SMB server (eg: Windows NT Server or Samba)
+; to provide authentication services
security = user
; Use password server option only with security = server
; password server = <NT-Server-Name>
-; Configuration Options ***** Watch location in smb.conf for side-effects *****
+; Configuration Options ***** The location of this entry in your smb.conf
+; heirachy determines which parameters are overwritten - please watch out!
; Where %m is any SMBName (machine name, or computer name) for which a custom
; configuration is desired
; include = /etc/smb.conf.%m
; socket address = aaa.bbb.ccc.ddd
; Use keep alive only if really needed!!!!
; keep alive = 60
-
-; Domain Control Options
-; OS Level gives Samba the power to rule the roost. Windows NT = 32
+; Configure Samba to use multiple interfaces
+; Samba will auto-detect network interfaces - only use this if
+; the auto-detection does not deliver the needed results
+; interfaces = 192.168.12.2/24 176.16.111.22/19 10.11.13.14/255.255.252.0
+
+; Browser Control Options:
+; Local Master set to True causes Samba to participate in browser elections
+; the default setting is true, this causes Samba to behave like a
+; Windows NT server. Setting this to false turns off all browser
+; election participation.
+; local master = yes
+
+; OS Level gives Samba the power to win browser elections. Windows NT = 32
; Any value < 32 means NT wins as Master Browser, > 32 Samba gets it
+; default = 0, this ensures that Samba will NOT win the browser election.
; os level = 33
-; specifies Samba to be the Domain Master Browser
+
+; Domain Master specifies Samba to be the Domain Master Browser
+; Only ever set this if there is NO Windows NT Domain Controller on the
+; network
; domain master = yes
+
+; Preferred Master causes Samba to force a local browser election on startup
+; preferred master = yes
+
; Use with care only if you have an NT server on your network that has been
; configured at install time to be a primary domain controller.
; domain controller = <NT-Domain-Controller-SMBName>
+
+; Domain Logon Service Options:
; Domain logon control can be a good thing! See [netlogon] share section below!
+; Do NOT set this to yes if there is an Windows NT domain controller
+; on the network
; domain logons = yes
+
; run a specific logon batch file per workstation (machine)
; logon script = %m.bat
; run a specific logon batch file per username
; logon script = %u.bat
-; Windows Internet Name Serving Support Section
+
+; Where to store roving profiles (only for Win95 and WinNT)
+; %L substitutes for the SMB name we are called, %U is username
+; You must uncomment the [Profiles] share below
+; logon path = \\%L\Profiles\%U
+
+; Windows Internet Name Serving Support Section:
; WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
-; the default is NO.
+; the default is NO. If you have an Windows NT Server WINS use it!
+; Samba defaults to wins support = no
; wins support = yes
+
; WINS Server - Tells the NMBD components of Samba to be a WINS Client
; Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
+
; WINS Proxy - Tells Samba to answer name resolution queries on behalf of a non
; WINS Client capable client, for this to work there must be at least one
; WINS Server on the network. The default is NO.
; wins proxy = yes
-;============================ Share Declarations ==============================
+;============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
- read only = no
- preserve case = yes
- short preserve case = yes
- create mode = 0750
+ writable = yes
; Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Samba Network Logon Service
-; path = /home/netlogon
+; path = /usr/local/samba/lib/netlogon
; Case sensitivity breaks logon script processing!!!
; case sensitive = no
; guest ok = yes
; locking = no
-; read only = yes
-; browseable = yes ; say NO if you want to hide the NETLOGON share
-; admin users = @wheel
+; writable = no
+; For browseable say NO if you want to hide the NETLOGON share
+; browseable = yes
+
+; Un-comment the following to provide a specific roving profile share
+; the default is to use the user's home directory
+;[Profiles]
+; path = /usr/local/samba/profiles
+; browseable = no
+; printable = no
+; guest ok = yes
; NOTE: There is NO need to specifically define each individual printer
[printers]
browseable = no
printable = yes
; Set public = yes to allow user 'guest account' to print
- public = no
+ guest ok = no
writable = no
- create mode = 0700
+ create mask = 0700
;[tmp]
; comment = Temporary file space
; comment = PC Directories
; path = /usr/pc/%m
; public = no
-; writeable = yes
+; writable = yes
;
;
; A publicly accessible directory, read/write to all users. Note that all files
; writable = yes
; printable = no
; create mask = 0765
-
+++ /dev/null
-###########################################################################
-# Makefile for Samba SMB client/server for unix
-# Copyright Andrew Tridgell 1992-1996
-###########################################################################
-
-# The base manpages directory to put the man pages in
-# Note: $(MANDIR)/man1, $(MANDIR)/man5 and $(MANDIR)/man8 must exist.
-MANDIR = /usr/man
-
-# The directories to put things in. If you use multiple
-# architectures or share the samba binaries across NFS then
-# you will probably want to change this layout.
-BASEDIR = /usr
-BINDIR = $(BASEDIR)/bin
-SBINDIR = $(BASEDIR)/sbin
-LIBDIR = /etc
-VARDIR = /var
-
-# The permissions to give the executables
-INSTALLPERMS = 0755
-
-# Add any optimisation or debugging flags here
-# add -DSYSLOG for syslog support
-# RPM_OPT_FLAGS is needed when building an RPM distribution package
-# for RedHat Linux.
-FLAGS1 = $(RPM_OPT_FLAGS)
-#FLAGS1 = -O
-LIBS1 =
-
-# You will need to use a ANSI C compiler. This means under SunOS 4 you can't
-# use cc, instead you will have to use gcc.
-CC = gcc
-
-# This may help with some versions of make
-SHELL = /bin/sh
-
-# The following can be useful for compiling on multiple architectures
-# just uncommment them putting the right directory in.
-# srcdir=./
-# VPATH=$(srcdir)
-
-# set these to where to find various files
-# These can be overridden by command line switches (see smbd(8))
-# or in smb.conf (see smb.conf(5))
-SMBLOGFILE = $(VARDIR)/log/log.smb
-NMBLOGFILE = $(VARDIR)/log/log.nmb
-CONFIGFILE = $(LIBDIR)/smb.conf
-LMHOSTSFILE = $(LIBDIR)/lmhosts
-
-# the directory where lock files go
-LOCKDIR = $(VARDIR)/lock/samba
-
-# set this to the default group you want your machine to appear in
-# for browsing. This can also be set in nmbd (see nmbd(8))
-WORKGROUP = WORKGROUP
-
-# set this to the name of the default account, which is the one
-# to use when no username or password is specified. This can be overridden
-# in the runtime configuration file (see smb.conf(5))
-# NOTE: The account "nobody" may not be a good one as
-# on many unixes it may not be able to print. Thus you
-# might have to create a separate guest account that can print.
-GUESTACCOUNT = nobody
-
-# where you are going to have the smbrun binary. This defaults to the
-# install directory. This binary is needed for correct printing
-# and magic script execution. This should be an absolute path!
-# Also not that this should include the name "smbrun" on the end (the
-# name of the executable)
-SMBRUN = $(BINDIR)/smbrun
-
-# This is for PAM authentication. RedHat Linux uses PAM.
-# If you use PAM, then uncomment the following lines:
-PAM_FLAGS = -DUSE_PAM
-PAM_LIBS = -ldl -lpam
-
-# This is for AFS authentication. If you use AFS then set AFS_BASE
-# according to your system layout, and uncomment the other lines as well.
-# AFS_BASE = /usr/afsws
-# AFS_FLAGS = -DAFS_AUTH -I$(AFS_BASE)/include
-# AFS_LIBDIR = $(AFS_BASE)/lib
-# NOTE: You may need to add -laudit in the line below
-# AFS_LIBS = -L$(AFS_LIBDIR) -L$(AFS_LIBDIR)/afs -lkauth -lprot -lubik \
-# -lauth -lrxkad -lsys -ldes -lrx -llwp -lcom_err \
-# $(AFS_LIBDIR)/afs/util.a
-
-# This is for DCE/DFS enablement. Uncomment this so that smbd can
-# operate as an authenticated user identity to operate on files that
-# live in the DCE Distributed Filesystem.
-# DCE_BASE = /opt/dcelocal
-# DCE_FLAGS = -I$(DCE_BASE)/include
-# DCE_LIBDIR = -L$(DCE_BASE)/lib
-# DCE_LIBS =
-
-# This is for SMB encrypted (lanman) passwords.
-# you may wish to add -DREPLACE_GETPASS if your getpass() is limited
-# to 8 chars
-# DES_BASE=/usr/local/libdes
-# DES_FLAGS= -I$(DES_BASE)
-# DES_LIB= -L$(DES_BASE) -ldes
-# PASSWD_FLAGS=-DUSE_LIBDES -DSMB_PASSWD=\"$(BINDIR)/smbpasswd\" -DSMB_PASSWD_FILE=\"$(BASEDIR)/private/smbpasswd\"
-
-######################################
-# VTP-Support
-#
-# uncomment the following two lines to enable VTP-Support
-#VTP_FLAGS = -DWITH_VTP
-#VTP_OBJ = vt_mode.o
-######################################
-
-######################################
-# WHICH AWK? awk is used for automatic prototype generation. GNU awk works
-# where inferior awks don't. Sun is one manufacturer who supplies both
-# a broken awk called 'awk' and a fixed one called 'nawk'. mkproto.awk will
-# only work with the latter, and even that isn't as good as free GNU awk.
-#
-# Leave this uncommented; the OS-specific stuff will override it if required
-AWK = awk
-######################################
-
-#####################################
-# WHICH OPERATING SYSTEM?
-# UNCOMMENT ONE OF THE SECTIONS BELOW
-# MAKE SURE ONLY *ONE* IS UNCOMMENTED
-#
-# The following are additional flags that may apply
-# -DNETGROUP if your machine supports yp netgroups
-# -DSHADOW_PWD if you are using shadow passwords
-# -DGETPWANAM if you wish to use getpwanam() call
-# -DPWDAUTH if you have and want to use the pwdauth() call
-# -DUFC_CRYPT if you want the fast crypt routine
-# -DALLOW_CHANGE_PASSWORD if you want users to be able to set their password
-# remotely (only works on some systems)
-# -DQUOTAS for quota support in disk_free(). This probably only works
-# on some systems.
-# -DFAST_SHARE_MODES=1 if you want the fast shared memory instead of the
-# slow description files for share mode locking. This
-# requires the mmap() and lockf() system calls.
-#
-# NOTE: GETPWANAM & PWDAUTH are mutually exclusive, if you
-# Define one, you should NOT define the other.
-#####################################
-
-#####################################
-# for the JAPANESE EXTENSION
-# select filename's code set for KANJI/KANA in UNIX,
-# apply the following flag
-# -DKANJI=\"<code>\"
-# <code> is select character code set for JAPAN.
-# sjis: if your machine support SJIS
-# euc: if your machine support EUC
-# jis7: if your machine support JIS7
-# jis8: if your machine support JIS8
-# junet: if your machine support jis7 + junet rule
-# hex: if your machine only support 7 bits ascii filename only
-# convert to hexdecimal code preseeding ':'.
-# see also README.jis
-######################################
-
-
-# This is for SUNOS 4. Use the SUNOS5 entry for Solaris 2.
-# Note that you cannot use Suns "cc" compiler
-# as it's not an Ansi-C compiler. Get gcc or acc.
-# Note that if you have adjunct passwords you may need the GETPWANAM
-# or PWDAUTH option. There have been reports that using PWDAUTH may crash
-# your pwdauthd server so GETPWANAM is preferable (and probably faster)
-# contributed by Andrew.Tridgell@anu.edu.au
-# FLAGSM = -DSUNOS4
-# LIBSM =
-# AWK = nawk
-
-# Use this for Linux with shadow passwords
-# contributed by Andrew.Tridgell@anu.edu.au
-# add -DLINUX_BIGCRYPT is you have shadow passwords but don't have the
-# right libraries and includes
-# FLAGSM = -DLINUX -DSHADOW_PWD
-# LIBSM = -lshadow
-
-# Use this for Linux without shadow passwords
-# contributed by Andrew.Tridgell@anu.edu.au
-# AXPROC defines DEC Alpha Processor
-# FLAGSM = -DLINUX -DAXPROC
-FLAGSM = -DLINUX
-LIBSM =
-
-# Use this for Linux with quotas and without shadow passwords
-# contributed by Andrew.Tridgell@anu.edu.au
-# AXPROC defines DEC Alpha Processor
-# FLAGSM = -DLINUX -DAXPROC -DQUOTAS
-# FLAGSM = -DLINUX -DQUOTAS
-# LIBSM =
-
-# Use this for Linux with quota and glibc2
-# contributed by xeno@mix.hive.no
-# Tested on the 2.0.30 kernel and ext2fs filesystem.
-# FLAGSM = -DLINUX -DQUOTAS -DNO_ASMSIGNALH -DGLIBC2
-# LIBSM = -L/lib/libc5-compat -lcrypt
-
-# This is for SUNOS5.4 and later (also known as Solaris 2.4 and later)
-# contributed by Andrew.Tridgell@anu.edu.au
-# FLAGSM = -DSUNOS5 -DSHADOW_PWD -DNETGROUP
-# LIBSM = -lsocket -lnsl
-# AWK = nawk
-
-# This is for SUNOS 5.2 and 5.3 (also known as Solaris 2.2 and 2.3)
-# contributed by hdsi@newtech.net
-# FLAGSM = -DSUNOS5 -DSHADOW_PWD -DNETGROUP -DNO_STRFTIME
-# LIBSM = -lsocket -lnsl
-# AWK = nawk
-
-# This is for UXP/DS
-# contributed by dsfrost@oai6.yk.fujitsu.co.jp
-# FLAGSM = -DSVR4 -DSHADOW_PWD
-# LIBSM = -lsocket -lnsl
-
-# This is for SVR4
-# Contributed by mark@scot1.ucsalf.ac.uk
-# FLAGSM = -DSVR4 -DSHADOW_PWD -DALLOW_CHANGE_PASSWORD
-# LIBSM = -lsocket -lnsl -lc -L/usr/ucblib -lucb
-
-
-# This is for the Motorola 88xxx/9xx range of machines
-# Contributed by RPE@monnet.com
-# FLAGSM = -DSVR4 -DSHADOW_PWD -DGETTIMEOFDAY1
-# LIBSM = -lsocket -lnsl -lc -L/usr/ucblib -lucb
-
-
-# This is for UNIXWARE
-# FLAGSM = -Xa -DSVR4 -DSHADOW_PWD
-# LIBSM = -lsocket -lnsl -lc -L/usr/ucblib -lucb
-
-
-# This is for ULTRIX. Add -DULTRIX_AUTH for Ultrix enhanced security.
-# contributed by iversen@dsfys1.fi.uib.no
-# FLAGSM = -DULTRIX
-# LIBSM =
-
-
-# This is for OSF1 (Alpha)
-# contributed by errath@balu.kfunigraz.ac.at
-# NOTE: You may need -warning_unresolved if you get unresolved symbols
-# FLAGSM = -DOSF1
-# LIBSM =
-
-# This is for OSF1 with DCE/DFS
-# contributed by Jim Doyle <doyle@oec.com>
-# FLAGSM = -DOSF1 -DDFS_AUTH -DSIGCLD_IGNORE -DNO_SIGNAL_TEST
-# LIBSM = -ldce -lpthreads -lmach -lc_r
-
-# This is for OSF1 (Alpha) with NIS and Fast Crypt
-# contributed by David Gardiner <dgardine@cssip.edu.au>
-# FLAGSM = -DOSF1 -DNETGROUP -DUFC_CRYPT
-# LIBSM =
-
-
-# This is for OSF1 (Alpha) V2.0 Enhanced Security
-# contributed by Udo Linauer <ul@eacpc4.tuwien.ac.at>
-# FLAGSM = -DOSF1 -DOSF1_ENH_SEC
-# LIBSM = -lsecurity
-
-
-# This is for AIX
-# contributed by tomc@osi.curtin.edu.au
-# FLAGSM = -DAIX
-# LIBSM =
-
-# This is for AIX 3.2.5 with DCE/DFS
-# contributed by Jim Doyle <doyle@oec.com>
-# FLAGSM = -DAIX -DDFS_AUTH -DSIGCLD_IGNORE -DNO_SIGNAL_TEST
-# LIBSM = -lc_r -ldce -lpthreads
-# CC = cc_r
-
-# This is for BSDI
-# contributed by tomh@metrics.com
-# versions of BSDI prior to 2.0 may need to add -DUSE_F_FSIZE for
-# disk usage stats to be correct
-# FLAGSM = -DBSDI
-# LIBSM =
-
-
-# This is for NetBSD. Add -DNETBSD_1_0 if you are using 1.0
-# contributed by noses@oink.rhein.de
-# FLAGSM = -DNETBSD -DSHADOW_PWD
-# LIBSM = -lcrypt
-
-
-# This is for SEQUENT.
-# Contributed by fwk@ix.netcom.com (Frank Keeney) and
-# rpwillia@Pentagon-EMH6.army.mil (Ray Williams)
-# tested on DYNIX/ptx(R) V2.1.0
-# FLAGSM = -DSEQUENT -DSHADOW_PWD -DHAVE_TIMEZONE
-# LIBSM = -lrpc -lsocket -lPW -linet -lnsl -lseq -lsec
-
-
-# This is for SEQUENT PTX 4.1.x
-# Contributed by bressler@iftccu.ca.boeing.com (Rick Bressler)
-# based on Keeny and Williams contribution.
-# tested on DYNIX/ptx(R) V4.1.3
-# FLAGSM = -DSEQUENT -DSHADOW_PWD -DHAVE_TIMEZONE -DPTX4
-# LIBSM = -lrpc -lsocket -lPW -lnsl -lseq -lsec
-
-
-# This is for HP-UX. Note that some systems don't like the -Aa switch.
-# contributed by Pasi.Kaara@atk.tpo.fi
-# You will need -DREPLACE_GETPASS if you use smb encryption
-# FLAGSM = -DHPUX -Aa -D_HPUX_SOURCE -D_POSIX_SOURCE
-# LIBSM =
-
-# This is for HP-UX with DCE/DFS
-# contributed by Jim Doyle <doyle@oec.com>
-# FLAGSM = -DHPUX -Aa -D_HPUX_SOURCE -D_POSIX_SOURCE -DDFS_AUTH -D_REENTRANT -I/usr/include/reentrant
-# LIBSM = -ldce -lM -lc_r
-
-# HP-UX 10.x Trusted System
-# Contributed by David-Michael Lincke (dlincke@sgcl1.unisg.ch)
-# FLAGSM = +O3 -Ae -DHPUX -DHPUX_10_TRUSTED
-# LIBSM = -lsec
-
-
-# This is for SGI.
-# contributed by lpc@solomon.technet.sg (Michael Chua)
-# FOR SGI IRIX 4.x.x, use the following line
-# FLAGSM = -DSGI -DHAVE_TIMEZONE
-# LIBSM = -lsun
-
-# FOR SGI IRIX 5.x.x, use this line instead
-# FLAGSM = -DSGI5 -DSHADOW_PWD -DHAVE_TIMEZONE
-# LIBSM =
-
-
-# This is for FreeBSD
-# contributed by kuku@acds.physik.rwth-aachen.de
-# NOTE: You may need to add -DBSD44 if you have password problems
-# FLAGSM = -DFreeBSD
-# LIBSM = -lcrypt
-
-
-# This is for NEXTSTEP Release 2.X
-# No Posix.
-# contributed by brad@cac.washington.edu (Brad Greer)
-# FLAGSM = -DNEXT2
-# LIBSM =
-
-# This is for NEXTSTEP Release 3.0 and greater (including OPENSTEP for Mach).
-# contributed by brad@cac.washington.edu (Brad Greer)
-# additional configuration by pmarcos@next.com (Paul Marcos)
-# For compiling n-way fat executables, you should append the appropriat -arch
-# flags to the FLAGSM variable. Valid flags are:
-# -arch m68k
-# -arch i386
-# -arch hppa
-# -arch sparc
-# To compile 4-way fat, you would append
-# -arch m68k -arch i386 -arch hppa -arch sparc
-# FLAGSM = -DNEXT3_0
-# LIBSM =
-
-
-# NOTE: ISC is also known as "INTERACTIVE"
-# This is for Sunsoft ISC SVR3V4 running in POSIX mode
-# contributed by pim@cti-software.nl (Pim Zandbergen)
-# FLAGSM = -posix -D_SYSV3 -DISC -DSHADOW_PWD
-# LIBSM = -lsec -lcrypt -linet
-
-# This is for Sunsoft ISC SVR3V4 running in iBCS2 mode
-# contributed by pim@cti-software.nl (Pim Zandbergen)
-# FLAGSM = -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_SYSV3\
-# -DISC -DSHADOW_PWD -DREPLACE_GETWD -DREPLACE_RENAME
-# LIBSM = -lsec -lcrypt -linet -lcposix
-
-
-# This is for A/UX 3.0
-# Contributed by root@dolphin.csudh.edu (Jon S. Stevens)
-# FLAGSM = -DAUX
-# LIBSM =
-
-# This is for Altos Series 386/1000
-# Contributed by cal@zls.com
-# FLAGSM = -DALTOS -DHAS_RDCHK
-# LIBSM = -lsocket -lxenix
-
-
-#Note: The SCO entries require the libcrypt library. You can get it via
-#anonymous ftp from ftp.sco.com:/SLS/lng225b.* or ftp.uu.net:/vendors/sco
-#
-# Use this for SCO with shadow passwords. Tested on "Open enterprise 3.0"
-# SCO changes from Heinz Mauelshagen (mauelsha@ez.da.telekom.de)
-# FLAGSM = -DSCO -DSHADOW_PWD -DNETGROUP
-# LIBSM = -lyp -lrpc -lyp -lsec -lsocket -lcrypt_i -lintl
-
-# Use this for SCO with shadow passwords, without YP.
-# Tested on "Open Enterprise Server 3.0" (John Owens john@micros.com)
-# Also, use "CC = cc" above.
-# FLAGSM = -DSCO -DSHADOW_PWD
-# LIBSM = -lsec -lsocket -lcrypt_i
-
-# Use this for SCO with TCB passwords (default).
-# Tested on "Open enterprise 3.0". Contributed by lance@fox.com.
-# CC = cc
-# FLAGSM = -DSCO -DSecureWare
-# LIBSM = -lprot_s -lcrypt -lsocket -lm -lc_s
-
-# Use this for SCO Unix 3.2v2 (ODT 1.1) with TCB passwords (default).
-# Contributed by Stephen.Rothwell@pd.necisa.oz.au
-# N.B. this needs gcc
-# FLAGSM = -DSCO -DSecureWare -DSCO3_2_2
-# LIBSM = -lprot -lcrypt_i -lsocket -lm -lintl
-
-# This is for the european distribution of SCO.
-# Contributed by Urmet.Janes@gwhite.goodwin.ee
-# FLAGSM = -DSCO -DSHADOW_PWD
-# LIBSM = -lsec -lsocket /usr/lib/libcrypt_i.a -lintl
-
-# Use this for SCO OpenServer 5 with TCB passwords (default).
-# contributed by Scott Michel <scottm@intime.intime.com>
-# you may also like to add the -dy switch (recommended by Marnus van
-# Niekerk, mvn@pixie.co.za)
-# CC = cc -Xc
-# FLAGSM = -DSCO -DSecureWare -DEVEREST -DUSE_MMAP
-# LIBSM = -lprot -lcurses -lcrypt -lsocket -lPW -lm -lx -lc_s -lc
-
-
-# This is for intergraph.
-# contributed by cjkiick@flinx.b11.ingr.com
-# modified by ttj@sknsws61.sjo.statkart.no
-# FLAGSM = -DCLIX -D_INGR_EXTENSIONS=1
-# LIBSM = -lbsd -lc_s
-
-# This is for DGUX.
-# Contributed by ross@augie.insci.com (Ross Andrus)
-# FLAGSM = -DDGUX
-# LIBSM =
-
-# This is for Apollo Domain/OS sr10.3 (systype = BSD4.3)
-# Added 1994-07-08 Stephen C. Steel <steve@qv3donald.LeidenUniv.nl>
-# additional patches by jmi@csd.cri.dk (John Mills)
-# you may need the "-A ansi" switch to cc
-# FLAGSM = -DAPOLLO -D_INCLUDE_BSD_SOURCE -D_INCLUDE_XOPEN_SOURCE
-# LIBSM =
-
-
-# RiscIX.
-# contributed by Jim Barry <jim@ilp.com> and
-# Charles Gay-Jones <charlie@ilp.com>
-# FLAGSM = -DRiscIX -DNOSTRDUP
-# LIBSM =
-
-
-# This is for System V with some berkely extensions (Motorola 88k R32V3.2).
-# contributed by tonyb@plaza.ds.adp.com (Tony D. Birnseth)
-# FLAGSM = -DM88K_R3
-# LIBSM = -lgen -lbsd -lnsl
-
-
-# This is for DNIX.
-# contributed by Peter Olsson <pol@leissner.se>
-# NOTE: You may need an updated libc.a from your vendor as older
-# versions have broken mktime calls and no initgroups() call
-# NOTE2: You may need -lpasswd if you use shadow passwords
-# NOTE3: Please read the file DNIX.txt in the docs directory. It
-# contains important information about uid handling under DNIX, you may
-# need to patch your C library.
-# FLAGSM = -DDNIX -I/usr/include/bsd
-# LIBSM = -ln
-
-
-# This is for Cray, Unicos 8.0
-# contributed by velo@sesun3.epfl.ch (Martin Ouwehand)
-# FLAGSM = -DCRAY -U__STDC__ -DQUOTAS
-# LIBSM =
-
-# This is for Convex
-# contributed by Victor Balashov <balashov@cv.jinr.dubna.su>
-# and Ulrich Hahn <ulrich.hahn@zdv.uni-tuebingen.de>
-# FLAGSM= -DCONVEX -DSHADOW_PWD
-# LIBSM=
-
-# This is for SMP_DC.OSx v1.1-94c079 on Pyramid S series
-# contributed by jeffrey@itm.org
-# FLAGSM = -DSOLARIS -DSHADOW_PWD -DBSD_COMP
-# LIBSM = -lsocket -lnsl
-
-# This is for QNX 4.22
-# Contributed by eldo@invisa.satlink.net (Eldo Loguzzo)
-# FLAGSM = -DQNX -DGUEST_SESSSETUP=1
-# LIBSM =
-
-
-# This is for SONY NEWS, NEWS-OS 4.2.x
-# contributed by sky@sm.sony.co.jp (Katushi Sato)
-# FLAGSM = -DNEWS42 -DKANJI=\"sjis\"
-# LIBSM =
-
-
-# This is for SONY NEWS, NEWS-OS 6.1.x
-# contributed by kobo@sm.sony.co.jp (Yoichi Kobori)
-# FLAGSM = -Xa -DSVR4 -DNEWS61 -DSHADOW_PWD -DNETGROUP -DGETTIMEOFDAY1 -DKANJI=\"euc\"\ -D_SONYILS_H
-# LIBSM = -lsocket -lnsl
-
-
-# This is for OS/2 using EMX 0.9b
-# Contributed by jasonr@pec.co.nz (Jason Rumney)
-# FLAGSM = -DOS2
-# LIBSM = -Zexe -lsocket
-
-
-# This is for LYNX 2.3.0 (gcc v2.6)
-# Contributed by woelfel@hpe.fzk.de (Manfred Woelfel)
-# FLAGSM = -DLYNX -DUFC_CRYPT -mposix
-# LIBSM = -lbsd
-
-
-# This is for MachTen (a unix like system for Macintoshes)
-# contributed by Trevor Strohman (trev@figment.tenon.com)
-# FLAGSM = -DMACHTEN
-# LIBSM =
-
-
-# RISCOs 5.0B
-# contributed by John Agnew <johna@bfs.Unibol.COM>
-# FLAGSM = -systype svr4 -std -DSVR4
-# LIBSM = -lsocket -lnsl -lc -L/usr/ucblib -lucb
-
-
-# This is for B.O.S. (Bull Operating System)
-# Contributed by koine@fileita.it
-# FLAGSM = -DBOS -DNO_RESOURCEH -DUSE_WAITPID
-# LIBSM = -linet
-
-
-# This for Amiga using GCC and ixemul.library 43.0 or later.
-# contributed by Rask Ingemann Lambertsen <rask@k4315.kampsax.dtu.dk>
-# The binaries will support both AmiTCP and AS225R2 compatible
-# protocol stacks because of the use of ixnet.library.
-# Other protocol stacks will be supported automatically if
-# support for them is added to ixnet.library.
-# The binaries will have automatic stack extension :-)
-# smbd must be run from inetd :-(
-# FLAGSM = -DAMIGA -Dfork=vfork -mstackextend
-# LIBSM =
-
-
-
-######################################################################
-# DON'T EDIT BELOW THIS LINE
-######################################################################
-
-CFLAGS1 = $(FLAGS1) -DSMBLOGFILE=\"$(SMBLOGFILE)\" -DNMBLOGFILE=\"$(NMBLOGFILE)\"
-CFLAGS2 = -DCONFIGFILE=\"$(CONFIGFILE)\" -DLMHOSTSFILE=\"$(LMHOSTSFILE)\"
-CFLAGS3 = -DLOCKDIR=\"$(LOCKDIR)\" -DSMBRUN=\"$(SMBRUN)\"
-CFLAGS4 = -DWORKGROUP=\"$(WORKGROUP)\" -DGUEST_ACCOUNT=\"$(GUESTACCOUNT)\"
-CFLAGS5 = $(CFLAGS1) $(CFLAGS2) $(CFLAGS3) $(CFLAGS4) $(FLAGSM) $(AFS_FLAGS)
-CFLAGS = $(CFLAGS5) $(PAM_FLAGS) $(DCE_FLAGS) $(DES_FLAGS) $(PASSWD_FLAGS) $(VTP_FLAGS)
-LIBS = $(LIBS1) $(LIBSM) $(PAM_LIBS) $(DCE_LIBS) $(DES_LIB)
-
-SPROGS = smbd nmbd
-PROGS1 = smbclient testparm testprns smbrun smbstatus smbpasswd
-PROGS = $(PROGS1) nmblookup
-SCRIPTS = smbtar addtosmbpass
-
-all : CHECK $(SPROGS) $(PROGS)
-
-CHECK :
- @$(SHELL) $(srcdir)checkos.sh $(FLAGSM)
- @echo "Using CFLAGS = $(CFLAGS)"
- @echo "Using LIBS = $(LIBS)"
-
-INCLUDES1 = version.h local.h includes.h smb.h
-INCLUDES2 = trans2.h
-INCLUDES = $(INCLUDES1) $(INCLUDES2)
-
-UTILOBJ1 = util.o system.o charset.o kanji.o fault.o smbencrypt.o charcnv.o
-UTILOBJ2 = $(UTILOBJ1) md4.o loadparm.o params.o pcap.o username.o time.o
-UTILOBJ = $(UTILOBJ2) interface.o replace.o
-PARAMOBJ = $(UTILOBJ) ufc.o smbpass.o access.o shmem.o
-SMBDOBJ1 = $(PARAMOBJ) trans2.o pipes.o message.o dir.o printing.o locking.o
-SMBDOBJ2 = ipc.o reply.o mangle.o chgpasswd.o password.o quotas.o uid.o
-SMBDOBJ = predict.o $(SMBDOBJ1) $(SMBDOBJ2) $(VTP_OBJ)
-NMBDOBJ1 = nmblib.o namepacket.o nameresp.o nmbsync.o nameannounce.o nameelect.o
-NMBDOBJ2 = namedbresp.o namedbwork.o namedbserver.o namedbsubnet.o namedbname.o
-NMBDOBJ3 = nameservresp.o nameservreply.o namelogon.o namebrowse.o namework.o nameserv.o clientutil.o
-NMBDOBJ = $(UTILOBJ) $(NMBDOBJ1) $(NMBDOBJ2) $(NMBDOBJ3)
-.SUFFIXES:
-.SUFFIXES: .c .o .h
-
-.c.o: $(INCLUDES)
- @echo Compiling $*.c
- @$(CC) $(CFLAGS) -c $(srcdir)$*.c
-
-smbd: server.o $(SMBDOBJ)
- @echo Linking smbd
- @$(CC) $(CFLAGS) -o smbd server.o $(SMBDOBJ) $(LIBS) $(AFS_LIBS)
-
-smbrun: smbrun.o
- @echo Linking smbrun
- @$(CC) $(CFLAGS) -o smbrun smbrun.o $(LIBS)
-
-nmblookup: nmblookup.o namequery.o nmblib.o $(UTILOBJ)
- @echo Linking nmblookup
- @$(CC) $(CFLAGS) -o nmblookup nmblookup.o namequery.o nmblib.o $(UTILOBJ) $(LIBS)
-
-nmbd: nmbd.o $(NMBDOBJ)
- @echo Linking nmbd
- @$(CC) $(CFLAGS) -o nmbd nmbd.o $(NMBDOBJ) $(LIBS)
-
-smbclient: client.o clitar.o getsmbpass.o namequery.o nmblib.o $(UTILOBJ)
- @echo Linking smbclient
- @$(CC) $(CFLAGS) -o smbclient client.o clitar.o getsmbpass.o namequery.o nmblib.o $(UTILOBJ) $(LIBS)
-
-smbstatus: status.o $(PARAMOBJ)
- @echo Linking smbstatus
- @$(CC) $(CFLAGS) -o smbstatus status.o $(PARAMOBJ) $(LIBS)
-
-testparm: testparm.o $(PARAMOBJ)
- @echo Linking testparm
- @$(CC) $(CFLAGS) -o testparm testparm.o $(PARAMOBJ) $(LIBS)
-
-testprns: testprns.o $(PARAMOBJ)
- @echo Linking testprns
- @$(CC) $(CFLAGS) -o testprns testprns.o $(PARAMOBJ) $(LIBS)
-
-smbpasswd: smbpasswd.o getsmbpass.o $(PARAMOBJ)
- @echo Linking smbpasswd
- @$(CC) $(CFLAGS) -o smbpasswd smbpasswd.o getsmbpass.o $(PARAMOBJ) $(LIBS)
-
-install: installbin installman installscripts
-
-installbin: all
- @$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(SPROGS)
- @$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(BINDIR) $(LIBDIR) $(VARDIR) $(PROGS)
-
-installscripts:
- @$(SHELL) $(srcdir)installscripts.sh $(INSTALLPERMS) $(BINDIR) $(SCRIPTS)
-
-# revert to the previously installed version
-revert:
- @$(SHELL) $(srcdir)revert.sh $(SBINDIR) $(SPROGS) $(SCRIPTS)
- @$(SHELL) $(srcdir)revert.sh $(BINDIR) $(PROGS) $(SCRIPTS)
-
-installman:
- @$(SHELL) $(srcdir)installman.sh $(MANDIR) $(srcdir)
-
-uninstall: uninstallman uninstallbin uninstallscripts
-
-uninstallman:
- @$(SHELL) $(srcdir)uninstallman.sh $(MANDIR) $(srcdir)
-
-uninstallbin:
- @$(SHELL) $(srcdir)uninstallbin.sh $(INSTALLPERMS) $(BASEDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(SPROGS)
- @$(SHELL) $(srcdir)uninstallbin.sh $(INSTALLPERMS) $(BASEDIR) $(BINDIR) $(LIBDIR) $(VARDIR) $(PROGS)
-
-uninstallscripts:
- @$(SHELL) $(srcdir)uninstallscripts.sh $(INSTALLPERMS) $(BINDIR) $(SCRIPTS)
-
-clean:
- rm -f core *.o *~ $(PROGS) $(SPROGS)
-
-proto:
- @$(SHELL) $(srcdir)checkos.sh $(FLAGSM)
- $(AWK) -f mkproto.awk *.c > proto.h
-
-realclean: clean
-
git.samba.org / ira / wip.git / commitdiff