--- /dev/null
+.\" This manpage has been automatically generated by docbook2man
+.\" from a DocBook document. This tool can be found at:
+.\" <http://shell.ipoline.com/~elmert/comp/docbook2X/>
+.\" Please send any bug reports, improvements, comments, patches,
+.\" etc. to Steve Cheng <steve@ggi-project.org>.
+.TH "MOUNT.CIFS" "8" "03 August 2002" "" ""
+.SH NAME
+mount.cifs \- mount using the Common Internet File System (CIFS)
+.SH SYNOPSIS
+
+\fBmount.cifs\fR \fBservice\fR \fBmount-point\fR [ \fB-o options\fR]
+
+.SH "DESCRIPTION"
+.PP
+\fBmount.cifs\fR mounts a Linux CIFS filesystem. It
+is usually invoked as \fBmount.cifs\fR by
+the \fBmount(8)\fR command when using the
+"-t cifs" option. This command only works in Linux, and the kernel must
+support the cifs filesystem. The CIFS protocol is the successor to the
+SMB protocol and is supported by most Windows servers and many other
+commercial servers and Network Attached Storage appliances as well as
+by the popular Open Source server Samba.
+.PP
+Options to \fBmount.cifs\fR are specified as a comma-separated
+list of key=value pairs. It is possible to send options other
+than those listed here, assuming that cifs supports them. If
+you get mount failures, check your kernel log for errors on
+unknown options.
+.PP
+\fBmount.cifs\fR is a daemon. After mounting it keeps running until
+the mounted cifs is umounted. It will log things that happen
+when in daemon mode using the "machine name" mount.cifs, so
+typically this output will end up in
+\fIlog.mount.cifs\fR.
+.SH "OPTIONS"
+.TP
+\fBusername=<arg>\fR
+specifies the username to connect as. If
+this is not given, then the environment variable \fB USER\fR is used. This option can also take the
+form "user%password" or "user/workgroup" or
+"user/workgroup%password" to allow the password and workgroup
+to be specified as part of the username.
+.TP
+\fBpassword=<arg>\fR
+specifies the CIFS password. If this
+option is not given then the environment variable
+\fBPASSWD\fR is used. If it can find
+no password \fBmount.cifs\fR will prompt
+for a passeword, unless the guest option is
+given.
+
+Note that password which contain the arguement delimiter
+character (i.e. a comma ',') will failed to be parsed correctly
+on the command line. However, the same password defined
+in the PASSWD environment variable or a credentials file (see
+below) will be read correctly.
+.TP
+\fBcredentials=<filename>\fR
+specifies a file that contains a username
+and/or password. The format of the file is:
+
+
+.nf
+ username = <value>
+ password = <value>
+
+.fi
+
+This is preferred over having passwords in plaintext in a
+shared file, such as \fI/etc/fstab\fR. Be sure to protect any
+credentials file properly.
+.TP
+\fBuid=<arg>\fR
+sets the uid that will own all files on
+the mounted filesystem.
+It may be specified as either a username or a numeric uid.
+.TP
+\fBgid=<arg>\fR
+sets the gid that will own all files on
+the mounted filesystem.
+It may be specified as either a groupname or a numeric
+gid.
+.TP
+\fBport=<arg>\fR
+sets the remote cifs port number. By default
+port 445 is tried then if no response port 139 is tried.
+.TP
+\fBfmask=<arg>\fR
+sets the file mask. This determines the
+permissions that remote files have in the local filesystem.
+The default is based on the current umask.
+.TP
+\fBdmask=<arg>\fR
+sets the directory mask. This determines the
+permissions that remote directories have in the local filesystem.
+The default is based on the current umask.
+.TP
+\fBdebug=<arg>\fR
+sets the debug level. This is useful for
+tracking down cifs connection problems. A suggested value to
+start with is 4. If set too high there will be a lot of
+output, possibly hiding the useful output.
+.TP
+\fBip=<arg>\fR
+sets the destination host or IP address.
+.TP
+\fBdomain=<arg>\fR
+sets the domain (workgroup) of the user
+.TP
+\fBguest\fR
+don't prompt for a password
+.TP
+\fBro\fR
+mount read-only
+.TP
+\fBrw\fR
+mount read-write
+.TP
+\fBiocharset=<arg>\fR
+sets the charset used by the Linux side for codepage
+to charset translations (NLS). Argument should be the
+name of a charset, like iso8859-1. (Note: only kernel
+2.4.0 or later)
+.TP
+\fBcodepage=<arg>\fR
+sets the codepage the server uses. See the iocharset
+option. Example value cp850. (Note: only kernel 2.4.0
+or later)
+.TP
+\fBttl=<arg>\fR
+how long a directory listing is cached in milliseconds
+(also affects visibility of file size and date
+changes). A higher value means that changes on the
+server take longer to be noticed but it can give
+better performance on large directories, especially
+over long distances. Default is 1000ms but something
+like 10000ms (10 seconds) is probably more reasonable
+in many cases.
+(Note: only kernel 2.4.2 or later)
+.SH "ENVIRONMENT VARIABLES"
+.PP
+The variable \fBUSER\fR may contain the username of the
+person using the client. This information is used only if the
+protocol level is high enough to support session-level
+passwords. The variable can be used to set both username and
+password by using the format username%password.
+.PP
+The variable \fBPASSWD\fR may contain the password of the
+person using the client. This information is used only if the
+protocol level is high enough to support session-level
+passwords.
+.PP
+The variable \fBPASSWD_FILE\fR may contain the pathname
+of a file to read the password from. A single line of input is
+read and used as the password.
+.SH "BUGS"
+.PP
+Passwords and other options containing , can not be handled.
+For passwords an alternative way of passing them is in a credentials
+file or in the PASSWD environment.
+.PP
+The credentials file does not handle usernames or passwords with
+leading space.
+.PP
+Note that the typical response to a bug report is suggestion
+to try the latest version first. So please try doing that first,
+and always include which versions you use of relevant software
+when reporting bugs (minimum: samba, kernel, distribution)
+.SH "SEE ALSO"
+.PP
+Documentation/filesystems/cifs.txt in the linux kernel
+source tree may contain additional options and information.
+.SH "AUTHOR"
+.PP
+Steve French
+The syntax and manpage were loosely based on that of smbmount.
+.PP
+The current maintainer of the Linux cifs vfs and the userspace
+tool \fBmount.cifs\fR is Steve French <URL:mailto:sfrench@samba.org>.
+The SAMBA Mailing list <URL:mailto:samba@samba.org>
+is the preferred place to ask questions regarding these programs.
# cvs should be submitted for inclusion in samba cvs.
%define pkg_name samba
-%define ver 3.0.0beta2
+%define ver 3.0.0beta3
%define rel 3mdk
%define vscanver 0.3.3beta1
%define libsmbmajor 0
%define build_scanners 0
# CUPS supports functionality for 'printcap name = cups' (9.0 and later):
%define build_cupspc 0
+# releases that have chrpath available in main
+%define build_chrpath 0
# Set defaults for each version
%if %build_mdk92
%define build_cupspc 1
+%define build_chrpath 1
%endif
%if %build_mdk91
%define build_cupspc 1
+%define build_chrpath 1
%endif
%if %build_mdk90
+%define build_chrpath 1
%endif
%if %build_mdk82
%define message_bugzilla() %(echo -e -n "Please file bug reports for this package at Mandrake bugzilla \\n(http://qa.mandrakesoft.com) under the product name %{1}")
%define message_system %(echo -e -n "NOTE: This is a prerelease of samba-%{samba_major}, not intended for production\\n use. Rather these packages are provided, parallel installable\\nwith samba-2.2.x, for testing purposes")
+#check gcc version to disable some optimisations on gcc-3.3.1
+%define gcc331 %(gcc -dumpversion|awk '{if ($1>3.3) print 1; else print 0}')
+
%ifarch alpha
%define build_expsam xml
%else
Source8: samba-vscan-%{vscanver}.tar.bz2
%endif
Source10: samba-print-pdf.sh.bz2
+Source11: mount.cifs.8.bz2
Patch1: smbw.patch.bz2
-Patch2: samba-2.2.0-gawk.patch.bz2
Patch3: samba-2.2.0-buildroot.patch.bz2
Patch4: samba-3.0-smbmount-sbin.patch.bz2
%if !%have_pversion
# Version specific patches: current version
-Patch100: samba-3.0.0beta2-mandrake-packaging.patch.bz2
%else
# Version specific patches: upcoming version
%endif
%if %build_ads
BuildRequires: libldap-devel krb5-devel
%endif
+%if %build_chrpath
+BuildRequires: chrpath
+%endif
BuildRoot: %{_tmppath}/%{name}-root
Prefix: /usr
Prereq: /sbin/chkconfig /bin/mktemp /usr/bin/killall
%endif
#%patch111 -p1
%patch1 -p1 -b .smbw
-%patch2 -p1 -b .gawk
%patch3 -p1 -b .buildroot
%patch4 -p1 -b .sbin
# Version specific patches: current version
%if !%have_pversion
echo "Applying patches for current version: %{ver}"
-%patch100 -p1 -b .mdk
%else
# Version specific patches: upcoming version
echo "Applying patches for new versions: %{pversion}"
perl -pi -e 's/%{pkg_name}/%{name}/g' source/auth/pampass.c
%endif
+#remove cvs internal files from docs:
+find docs examples -name '.cvsignore' -exec rm -f {} \;
+
%build
#%serverbuild
(cd source
-CFLAGS="$RPM_OPT_FLAGS"
+CFLAGS=`echo "$RPM_OPT_FLAGS"|sed -e 's/-g//g'`
+%if %gcc331
+#CFLAGS=`echo "$CFLAGS"|sed -e 's/-O2/-Os/g'`
+%endif
# Don't use --with-fhs now, since it overrides libdir, it sets configdir,
# lockdir,piddir logfilebase,privatedir and swatdir
%configure --prefix=%{_prefix} \
- --sysconfdir=/etc/%{name} \
+ --sysconfdir=%{_sysconfdir}/%{name} \
--localstatedir=/var \
--libdir=%{_libdir}/%{name} \
- --with-privatedir=/etc/%{name} \
+ --with-privatedir=%{_sysconfdir}/%{name} \
--with-lockdir=/var/cache/%{name} \
--with-piddir=/var/run/%{name} \
--with-swatdir=%{_datadir}/swat%{samba_major} \
- --with-configdir=/etc/%{name} \
+ --with-configdir=%{_sysconfdir}/%{name} \
--with-logfilebase=/var/log/%{name} \
%if !%build_ads
--with-ads=no \
%endif
make proto_exists
-%make all libsmbclient smbfilter wins modules %{!?_without_test: torture debug2html} bin/editreg
+%make all libsmbclient smbfilter wins modules %{!?_without_test: torture debug2html} bin/editreg client/mount.cifs
# Build VFS modules (experimental)
chmod a+r docs -R
# Any entries here mean samba makefile is *really* broken:
-mkdir -p $RPM_BUILD_ROOT/etc/%{name}
+mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/%{name}
mkdir -p $RPM_BUILD_ROOT/%{_datadir}
mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs
#need to stay
mkdir -p $RPM_BUILD_ROOT/sbin
-mkdir -p $RPM_BUILD_ROOT/etc/{logrotate.d,pam.d,xinetd.d}
-mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d
+mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/{logrotate.d,pam.d,xinetd.d}
+mkdir -p $RPM_BUILD_ROOT/%{_initrddir}
mkdir -p $RPM_BUILD_ROOT/var/cache/%{name}
mkdir -p $RPM_BUILD_ROOT/var/log/%{name}
mkdir -p $RPM_BUILD_ROOT/var/run/%{name}
# Install other stuff
-# install -m644 examples/VFS/recycle/recycle.conf $RPM_BUILD_ROOT/etc/samba/
- install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT/etc/%{name}/smbusers
+# install -m644 examples/VFS/recycle/recycle.conf $RPM_BUILD_ROOT%{_sysconfdir}/samba/
+ install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/smbusers
install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT/%{_bindir}
#install -m755 packaging/RedHat/smbadduser $RPM_BUILD_ROOT/usr/bin
install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT/%{_bindir}
- install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/etc/rc.d/init.d/smb%{samba_major}
+ install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_initrddir}/smb%{samba_major}
install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_sbindir}/%{name}
- install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/etc/rc.d/init.d/winbind%{samba_major}
-# install -m755 packaging/Mandrake/wrepld.init $RPM_BUILD_ROOT/etc/rc.d/init.d/wrepld%{samba_major}
+ install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_initrddir}/winbind%{samba_major}
+# install -m755 packaging/Mandrake/wrepld.init $RPM_BUILD_ROOT/%{_initrddir}/wrepld%{samba_major}
install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_sbindir}/winbind%{samba_major}
- install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/etc/pam.d/%{name}
- install -m644 packaging/Mandrake/system-auth-winbind.pamd $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major}
+ install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/%{name}
+ install -m644 packaging/Mandrake/system-auth-winbind.pamd $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/system-auth-winbind%{samba_major}
#
- install -m644 %{SOURCE1} $RPM_BUILD_ROOT/etc/logrotate.d/%{name}
+ install -m644 %{SOURCE1} $RPM_BUILD_ROOT/%{_sysconfdir}/logrotate.d/%{name}
# install -m644 packaging/Mandrake/samba-slapd-include.conf $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/samba-slapd.include
# Install smbldap-tools scripts:
# make a conf file for winbind from the default one:
cat packaging/Mandrake/smb.conf|sed -e 's/^; winbind/ winbind/g;s/^; obey pam/ obey pam/g; s/^; printer admin = @"D/ printer admin = @"D/g;s/^; password server = \*/ password server = \*/g;s/^; template/ template/g; s/^ security = user/ security = domain/g' > packaging/Mandrake/smb-winbind.conf
- install -m644 packaging/Mandrake/smb-winbind.conf $RPM_BUILD_ROOT/etc/%{name}/smb-winbind.conf
+ install -m644 packaging/Mandrake/smb-winbind.conf $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb-winbind.conf
# Some inline fixes for smb.conf for non-winbind use
-install -m644 packaging/Mandrake/smb.conf $RPM_BUILD_ROOT/etc/%{name}/smb.conf
+install -m644 packaging/Mandrake/smb.conf $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf
cat packaging/Mandrake/smb.conf | \
-sed -e 's/^; printer admin = @adm/ printer admin = @adm/g' >$RPM_BUILD_ROOT/etc/%{name}/smb.conf
+sed -e 's/^; printer admin = @adm/ printer admin = @adm/g' >$RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf
%if %build_cupspc
-perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/etc/%{name}/smb.conf
-perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/etc/%{name}/smb-winbind.conf
+perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf
+perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb-winbind.conf
%endif
# Link smbmount to /sbin/mount.smb and /sbin/mount.smbfs
ln -s ..%{_bindir}/smbmount%{samba_major} mount.smb%{samba_major}
ln -s ..%{_bindir}/smbmount%{samba_major} mount.smbfs%{samba_major}
)
- echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/etc/%{name}/lmhosts
+
+#install mount.cifs
+install -m755 source/client/mount.cifs %{buildroot}/sbin
+bzcat %{SOURCE11} > %{buildroot}/%{_mandir}/man8/mount.cifs.8
+
+ echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/lmhosts
# Link smbspool to CUPS (does not require installed CUPS)
# xinetd support
- mkdir -p $RPM_BUILD_ROOT/etc/xinetd.d
- install -m644 %{SOURCE3} $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major}
+ mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d
+ install -m644 %{SOURCE3} $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d/swat%{samba_major}
# menu support
bzcat %{SOURCE10}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/print-pdf
+%if %build_chrpath
+find %{buildroot}/%{_lib} %{buildroot}/%{_bindir} %{buildroot}/%{_sbindir} %{buildroot}/%{_libdir} -type f -exec chrpath -d {} \;
+%endif
+
# Fix configs when not building system samba:
%if !%build_system
# Work around non-existent but claimed --program-suffix support :-(
done
# Replace paths in config files and init scripts:
for i in smb winbind;do
- perl -pi -e 's,/subsys/'$i',/subsys/'$i'%{samba_major},g' $RPM_BUILD_ROOT/etc/rc.d/init.d/${i}%{samba_major}
+ perl -pi -e 's,/subsys/'$i',/subsys/'$i'%{samba_major},g' $RPM_BUILD_ROOT/%{_initrddir}/${i}%{samba_major}
done
-for i in /etc/%{name}/smb.conf /etc/rc.d/init.d/smb%{samba_major} %{_sbindir}/%{name} /etc/rc.d/init.d/winbind%{samba_major} %{_sbindir}/winbind%{samba_major} /etc/logrotate.d/%{name} /etc/xinetd.d/swat%{samba_major} /etc/rc.d/init.d/wrepld%{samba_major}; do
+for i in %{_sysconfdir}/%{name}/smb.conf %{_initrddir}/smb%{samba_major} %{_sbindir}/%{name} %{_initrddir}/winbind%{samba_major} %{_sbindir}/winbind%{samba_major} /%{_sysconfdir}/logrotate.d/%{name} /%{_sysconfdir}/xinetd.d/swat%{samba_major} %{_initrddir}/wrepld%{samba_major}; do
perl -pi -e 's,/%{pkg_name},/%{name},g; s,smbd,%{_sbindir}/smbd%{samba_major},g; s,nmbd,%{_sbindir}/nmbd%{samba_major},g; s,winbindd,%{_sbindir}/winbindd%{samba_major},g; s,/usr/sbin/swat,%{_sbindir}/swat%{samba_major},g;s,wrepld,%{_sbindir}/wrepld%{samba_major},g' $RPM_BUILD_ROOT/$i;
done
# Fix pam files
-perl -pi -e 's/winbind/winbind%{samba_major}/g' $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major}
+perl -pi -e 's/winbind/winbind%{samba_major}/g' $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/system-auth-winbind%{samba_major}
# Fix xinetd file for swat:
-perl -pi -e 's,/usr/sbin,%{_sbindir},g' $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major}
+perl -pi -e 's,/usr/sbin,%{_sbindir},g' $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d/swat%{samba_major}
%endif
#Clean up unpackaged files:
%post common
# Basic migration script for pre-2.2.1 users,
-# since smb config moved from /etc to /etc/samba
+# since smb config moved from /etc to %{_sysconfdir}/samba
-# Let's create a proper /etc/samba/smbpasswd file
-[ -f /etc/%{name}/smbpasswd ] || {
+# Let's create a proper %{_sysconfdir}/samba/smbpasswd file
+[ -f %{_sysconfdir}/%{name}/smbpasswd ] || {
echo "Creating password file for samba..."
- touch /etc/%{name}/smbpasswd
+ touch %{_sysconfdir}/%{name}/smbpasswd
}
# And this too, in case we don't have smbd to create it for us
}
# Let's define the proper paths for config files
-perl -pi -e 's/(\/etc\/)(smb)/\1%{name}\/\2/' /etc/%{name}/smb.conf
+perl -pi -e 's/(\/etc\/)(smb)/\1%{name}\/\2/' %{_sysconfdir}/%{name}/smb.conf
# Let's replace lpstat with cups in older smb.conf:
%if %build_cupspc
echo "Updating samba printing configuration if necessary..."
-perl -pi -e 's/= lpstat/= cups/' /etc/%{name}/smb.conf
+perl -pi -e 's/= lpstat/= cups/' %{_sysconfdir}/%{name}/smb.conf
%endif
# Fix the logrotate.d file from smb and nmb to smbd and nmbd
-if [ -f /etc/logrotate.d/samba ]; then
- perl -pi -e 's/smb /smbd /' /etc/logrotate.d/samba
- perl -pi -e 's/nmb /nmbd /' /etc/logrotate.d/samba
+if [ -f %{_sysconfdir}/logrotate.d/samba ]; then
+ perl -pi -e 's/smb /smbd /' %{_sysconfdir}/logrotate.d/samba
+ perl -pi -e 's/nmb /nmbd /' %{_sysconfdir}/logrotate.d/samba
fi
# And not loose our machine account SID
-[ -f /etc/MACHINE.SID ] && mv -f /etc/MACHINE.SID /etc/%{name}/ ||:
+[ -f %{_sysconfdir}/MACHINE.SID ] && mv -f %{_sysconfdir}/MACHINE.SID %{_sysconfdir}/%{name}/ ||:
%if %build_winbind
%post winbind
if [ $1 = 1 ]; then
/sbin/chkconfig winbind%{samba_major} on
- cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave
- cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp
+ cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmsave
+ cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmtemp
for i in passwd group;do
- grep ^$i /etc/nsswitch.conf |grep -v 'winbind%{samba_major}' >/dev/null
+ grep ^$i %{_sysconfdir}/nsswitch.conf |grep -v 'winbind%{samba_major}' >/dev/null
if [ $? = 0 ];then
- echo "Adding a winbind%{samba_major} entry to the $i section of /etc/nsswitch.conf"
- awk '/^'$i'/ {print $0 " winbind%{samba_major}"};!/^'$i'/ {print}' /etc/nsswitch.conf.rpmtemp >/etc/nsswitch.conf;
- cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp
+ echo "Adding a winbind%{samba_major} entry to the $i section of %{_sysconfdir}/nsswitch.conf"
+ awk '/^'$i'/ {print $0 " winbind%{samba_major}"};!/^'$i'/ {print}' %{_sysconfdir}/nsswitch.conf.rpmtemp >%{_sysconfdir}/nsswitch.conf;
+ cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmtemp
else
- echo "$i entry found in /etc/nsswitch.conf"
+ echo "$i entry found in %{_sysconfdir}/nsswitch.conf"
fi
done
- if [ -f /etc/nsswitch.conf.rpmtemp ];then rm -f /etc/nsswitch.conf.rpmtemp;fi
+ if [ -f %{_sysconfdir}/nsswitch.conf.rpmtemp ];then rm -f %{_sysconfdir}/nsswitch.conf.rpmtemp;fi
fi
%preun winbind
if [ $1 = 0 ]; then
- echo "Removing winbind%{samba_major} entries from /etc/nsswitch.conf"
- perl -pi -e 's/ winbind%{samba_major}//' /etc/nsswitch.conf
+ echo "Removing winbind%{samba_major} entries from %{_sysconfdir}/nsswitch.conf"
+ perl -pi -e 's/ winbind%{samba_major}//' %{_sysconfdir}/nsswitch.conf
/sbin/chkconfig winbind%{samba_major} reset
fi
%if %build_wins
%post -n nss_wins%{samba_major}
if [ $1 = 1 ]; then
- cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave
- grep '^hosts' /etc/nsswitch.conf |grep -v 'wins%{samba_major}' >/dev/null
+ cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmsave
+ grep '^hosts' %{_sysconfdir}/nsswitch.conf |grep -v 'wins%{samba_major}' >/dev/null
if [ $? = 0 ];then
- echo "Adding a wins entry to the hosts section of /etc/nsswitch.conf"
- awk '/^hosts/ {print $0 " wins%{samba_major}"};!/^hosts/ {print}' /etc/nsswitch.conf.rpmsave >/etc/nsswitch.conf;
+ echo "Adding a wins entry to the hosts section of %{_sysconfdir}/nsswitch.conf"
+ awk '/^hosts/ {print $0 " wins%{samba_major}"};!/^hosts/ {print}' %{_sysconfdir}/nsswitch.conf.rpmsave >%{_sysconfdir}/nsswitch.conf;
else
- echo "wins entry found in /etc/nsswitch.conf"
+ echo "wins entry found in %{_sysconfdir}/nsswitch.conf"
fi
# else
# echo "Upgrade, leaving nsswitch.conf intact"
%preun -n nss_wins%{samba_major}
if [ $1 = 0 ]; then
- echo "Removing wins entry from /etc/nsswitch.conf"
- perl -pi -e 's/ wins%{samba_major}//' /etc/nsswitch.conf
+ echo "Removing wins entry from %{_sysconfdir}/nsswitch.conf"
+ perl -pi -e 's/ wins%{samba_major}//' %{_sysconfdir}/nsswitch.conf
#else
-# echo "Leaving /etc/nsswitch.conf intact"
+# echo "Leaving %{_sysconfdir}/nsswitch.conf intact"
fi
%endif %build_wins
%postun swat
# Remove swat entry from xinetd
-if [ $1 = 0 -a -f /etc/xinetd.conf ] ; then
-rm -f /etc/xinetd.d/swat%{samba_major}
+if [ $1 = 0 -a -f %{_sysconfdir}/xinetd.conf ] ; then
+rm -f %{_sysconfdir}/xinetd.d/swat%{samba_major}
service xinetd reload &>/dev/null || :
fi
if [ $1 != 0 ]; then
[ ! -d /var/lock/samba ] && mkdir -m 0755 /var/lock/samba ||:
[ ! -d /var/spool/samba ] && mkdir -m 1777 /var/spool/samba ||:
- [ -f /etc/inetd.conf ] && chmod 644 /etc/services /etc/inetd.conf ||:
+ [ -f %{_sysconfdir}/inetd.conf ] && chmod 644 %{_sysconfdir}/services %{_sysconfdir}/inetd.conf ||:
fi
%files server
%{_libdir}/%{name}/vfs/*.so
%dir %{_libdir}/%{name}/pdb
-#/usr/share/swat
-%attr(-,root,root) %config(noreplace) /etc/%{name}/smbusers
-%attr(-,root,root) %config %{_initrddir}/smb%{samba_major}
-#%attr(-,root,root) %config %{_initrddir}/wrepld%{samba_major}
-%attr(-,root,root) %config(noreplace) /etc/logrotate.d/%{name}
-%attr(-,root,root) %config(noreplace) /etc/pam.d/%{name}
-#%attr(-,root,root) %config(noreplace) /etc/%{name}/samba-slapd.include
+%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smbusers
+%attr(-,root,root) %config(noreplace) %{_initrddir}/smb%{samba_major}
+#%attr(-,root,root) %config(noreplace) %{_initrddir}/wrepld%{samba_major}
+%attr(-,root,root) %config(noreplace) %{_sysconfdir}/logrotate.d/%{name}
+%attr(-,root,root) %config(noreplace) %{_sysconfdir}/pam.d/%{name}
+#%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/samba-slapd.include
%{_mandir}/man1/smbstatus*.1*
%{_mandir}/man5/smbpasswd*.5*
%{_mandir}/man7/samba*.7*
%{_mandir}/man8/tdbbackup*.8*
%{_mandir}/man1/profiles*.1*
%{_mandir}/man1/editreg*.1*
-%attr(775,root,root) %dir %{_localstatedir}/%{name}/netlogon
-%attr(775,root,root) %dir %{_localstatedir}/%{name}/profiles
-%attr(775,root,root) %dir %{_localstatedir}/%{name}/printers
+%attr(775,root,adm) %dir %{_localstatedir}/%{name}/netlogon
+%attr(755,root,root) %dir %{_localstatedir}/%{name}/profiles
+%attr(755,root,root) %dir %{_localstatedir}/%{name}/printers
+%attr(775,root,adm) %dir %{_localstatedir}/%{name}/printers/*
%attr(1777,root,root) %dir /var/spool/%{name}
%dir %{_datadir}/%{name}
%dir %{_datadir}/%{name}/scripts
%doc README.%{name}-mandrake-rpm
%doc docs
%doc examples
-%doc swat/README
-%attr(-,root,root) %{_datadir}/swat%{samba_major}/using_samba/*
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/using_samba/
%files swat
%defattr(-,root,root)
-%config(noreplace) /etc/xinetd.d/swat%{samba_major}
+%config(noreplace) %{_sysconfdir}/xinetd.d/swat%{samba_major}
#%attr(-,root,root) /sbin/*
%{_sbindir}/swat%{samba_major}
%{_menudir}/%{name}-swat
%{_miconsdir}/*.png
%{_liconsdir}/*.png
%{_iconsdir}/*.png
-%attr(-,root,root) %{_datadir}/swat%{samba_major}/help/*
-%attr(-,root,root) %{_datadir}/swat%{samba_major}/images/*
-%attr(-,root,root) %{_datadir}/swat%{samba_major}/include/*
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/help/
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/images/
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/include/
%lang(ja) %{_datadir}/swat%{samba_major}/lang/ja
%lang(tr) %{_datadir}/swat%{samba_major}/lang/tr
%{_mandir}/man8/swat*.8*
+%doc swat/README
%files client
%defattr(-,root,root)
%ifnarch alpha
/sbin/mount.smb%{samba_major}
/sbin/mount.smbfs%{samba_major}
+/sbin/mount.cifs
%attr(755,root,root) %{_bindir}/smbmount%{samba_major}
%attr(4755,root,root) %{_bindir}/smbumount%{samba_major}
%attr(4755,root,root) %{_bindir}/smbmnt%{samba_major}
%{_mandir}/man8/smbmnt*.8*
%{_mandir}/man8/smbmount*.8*
%{_mandir}/man8/smbumount*.8*
+%{_mandir}/man8/mount.cifs*.8*
%else
%exclude %{_bindir}/smb*m*nt%{samba_major}
%exclude %{_mandir}/man8/smb*m*nt*.8*
%{_mandir}/man1/smbtree*.1*
%{_mandir}/man1/ntlm_auth*.1*
%{_mandir}/man7/Samba*.7*
+%dir %{_datadir}/swat%{samba_major}
%if %build_winbind
%files winbind
%{_bindir}/wbinfo%{samba_major}
%attr(755,root,root) /%{_lib}/security/pam_winbind*
%attr(755,root,root) /%{_lib}/libnss_winbind%{samba_major}*
-%attr(-,root,root) %config /etc/rc.d/init.d/winbind%{samba_major}
-%attr(-,root,root) %config(noreplace) /etc/pam.d/system-auth-winbind*
+%attr(-,root,root) %config(noreplace) %{_initrddir}/winbind%{samba_major}
+%attr(-,root,root) %config(noreplace) %{_sysconfdir}/pam.d/system-auth-winbind*
%{_mandir}/man8/winbindd*.8*
%{_mandir}/man1/wbinfo*.1*
%endif
%exclude %{_mandir}/man1/smbsh*.1*
%changelog
+* Mon Jul 28 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta3.3mdk
+- Rebuild for kerberos-1.3 on cooker
+- Put printer directories back
+- Add mount.cifs
+- Go back to standard optimisations
+
+* Thu Jul 17 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta3.2mdk
+- beta3
+- remove -g from cflags to avoid large static libraries
+- drop optimisation from O2 to O1 for gcc 3.3.1
+- own some directories for distriblint's benefit
+- use chrpath on distro's that have it to drastically reduce rpmlint score
+
* Mon Jul 14 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta2.3mdk
- place non-conditional excludes at the end of files list, to prevent causing
rpm in Mandrake <=8.2 from segfaulting when processing files.
git.samba.org / ira / wip.git / commitdiff