###########################################################################
# Makefile.in for Samba - rewritten for autoconf support
# Copyright Andrew Tridgell 1992-1998
+# Copyright (C) 2001 by Martin Pool <mbp@samba.org>
###########################################################################
prefix=@prefix@
exec_prefix=@exec_prefix@
mandir=@mandir@
-LIBS=@LIBS@
+LIBS=@LIBS@
CC=@CC@
+SHLD=@SHLD@
CFLAGS=@CFLAGS@
CPPFLAGS=@CPPFLAGS@
LDFLAGS=@LDFLAGS@
+LDSHFLAGS=@LDSHFLAGS@ @LDFLAGS@
AWK=@AWK@
TERMLDFLAGS=@TERMLDFLAGS@
TERMLIBS=@TERMLIBS@
-LIBTOOL=@LIBTOOL@ --quiet
-LIBTOOL_DEPS=@LIBTOOL_DEPS@
-LINK=$(LIBTOOL) --mode=link $(CC) $(FLAGS) $(LDFLAGS)
+LINK=$(CC) $(FLAGS) $(LDFLAGS)
INSTALLCMD=@INSTALL@
VPATH=@srcdir@
srcdir=@srcdir@
builddir=@builddir@
-top_builddir=.
SHELL=/bin/sh
+# XXX: Perhaps this should be @SHELL@ instead -- apparently autoconf
+# will search for a POSIX-compliant shell, and that might not be
+# /bin/sh on some platforms. I guess it's not a big problem -- mbp
+
+# See the autoconf manual "Installation Directory Variables" for a
+# discussion of thesubtle use of these variables.
+
BASEDIR= @prefix@
BINDIR = @bindir@
-# we don't use sbindir because we want full compatibility with
-# the previous releases of Samba
-SBINDIR = @bindir@
+# sbindir is mapped to bindir when compiling SAMBA in 2.0.x compatibility mode.
+SBINDIR = @sbindir@
LIBDIR = @libdir@
VARDIR = @localstatedir@
MANDIR = @mandir@
CONFIGFILE = $(LIBDIR)/smb.conf
LMHOSTSFILE = $(LIBDIR)/lmhosts
DRIVERFILE = $(LIBDIR)/printers.def
-PASSWD_PROGRAM = /bin/passwd
# This is where smbpasswd et al go
PRIVATEDIR = @privatedir@
# the directory where lock files go
LOCKDIR = @lockdir@
-# The directory where code page definition files go
-CODEPAGEDIR = $(LIBDIR)/codepages
-
-# The current codepage definition list.
-CODEPAGELIST= 437 737 775 850 852 861 932 866 949 950 936 1251 ISO8859-1 ISO8859-2 ISO8859-5 ISO8859-7 KOI8-R 857 ISO8859-9 ISO8859-13 ISO8859-15
-
-PASSWD_FLAGS = -DPASSWD_PROGRAM=\"$(PASSWD_PROGRAM)\" -DSMB_PASSWD_FILE=\"$(SMB_PASSWD_FILE)\" -DPRIVATE_DIR=\"$(PRIVATE_DIR)\"
-FLAGS1 = $(CFLAGS) -Iinclude -I$(srcdir)/include -I$(srcdir)/ubiqx -I$(srcdir)/smbwrapper $(CPPFLAGS) -DLOGFILEBASE=\"$(LOGFILEBASE)\"
-FLAGS2 = -DCONFIGFILE=\"$(CONFIGFILE)\" -DLMHOSTSFILE=\"$(LMHOSTSFILE)\"
-FLAGS3 = -DSWATDIR=\"$(SWATDIR)\" -DSBINDIR=\"$(SBINDIR)\" -DLOCKDIR=\"$(LOCKDIR)\" -DCODEPAGEDIR=\"$(CODEPAGEDIR)\"
-FLAGS4 = -DDRIVERFILE=\"$(DRIVERFILE)\" -DBINDIR=\"$(BINDIR)\" -DFORMSFILE=\"$(FORMSFILE)\" -DNTDRIVERSDIR=\"$(NTDRIVERSDIR)\"
-FLAGS5 = $(FLAGS1) $(FLAGS2) $(FLAGS3) $(FLAGS4) -DHAVE_INCLUDES_H
-FLAGS = $(ISA) $(FLAGS5) $(PASSWD_FLAGS)
-FLAGS32 = $(ISA32) $(FLAGS5) $(PASSWD_FLAGS)
-
-SPROGS = bin/smbd bin/nmbd bin/swat
-PROGS1 = bin/smbclient bin/smbspool bin/testparm bin/testprns bin/smbstatus bin/smbcontrol @RUNPROG@
-PROGS2 = bin/smbpasswd bin/make_smbcodepage bin/make_unicodemap bin/rpcclient bin/smbcacls @WRAP@ @WRAP32@ @PAM_MOD@
+# man pages language(s)
+man_langs = "@manlangs@"
+
+FLAGS1 = $(CFLAGS) -Iinclude -I$(srcdir)/include -I$(srcdir)/ubiqx -I$(srcdir)/smbwrapper $(CPPFLAGS) -I. -I$(srcdir)
+FLAGS2 =
+FLAGS3 =
+FLAGS5 = $(FLAGS1) $(FLAGS2) $(FLAGS3) $(FLAGS4)
+FLAGS = $(ISA) $(FLAGS5)
+FLAGS32 = $(ISA32) $(FLAGS5)
+
+PASSWD_FLAGS = -DSMB_PASSWD_FILE=\"$(SMB_PASSWD_FILE)\" -DPRIVATE_DIR=\"$(PRIVATE_DIR)\"
+PATH_FLAGS1 = -DCONFIGFILE=\"$(CONFIGFILE)\" -DSBINDIR=\"$(SBINDIR)\"
+PATH_FLAGS2 = $(PATH_FLAGS1) -DBINDIR=\"$(BINDIR)\" -DDRIVERFILE=\"$(DRIVERFILE)\"
+PATH_FLAGS3 = $(PATH_FLAGS2) -DLMHOSTSFILE=\"$(LMHOSTSFILE)\"
+PATH_FLAGS4 = $(PATH_FLAGS3) -DSWATDIR=\"$(SWATDIR)\" -DLOCKDIR=\"$(LOCKDIR)\"
+PATH_FLAGS5 = $(PATH_FLAGS4) -DLIBDIR=\"$(LIBDIR)\" -DLOGFILEBASE=\"$(LOGFILEBASE)\"
+PATH_FLAGS = $(PATH_FLAGS5) $(PASSWD_FLAGS)
+
+WINBIND_PROGS = bin/wbinfo
+WINBIND_SPROGS = bin/winbindd
+WINBIND_PAM_PROGS = nsswitch/pam_winbind.so
+WINBIND_LPROGS = @WINBIND_PAM_PROGS@ nsswitch/libnss_winbind.so
+
+SPROGS = bin/smbd bin/nmbd bin/swat @WINBIND_STARGETS@
+PROGS1 = bin/smbclient bin/net bin/smbspool bin/testparm bin/testprns bin/smbstatus bin/smbcontrol bin/smbtree @RUNPROG@ @WINBIND_TARGETS@
+PROGS2 = bin/smbpasswd bin/rpcclient bin/smbcacls @WRAP@ @WRAP32@ @PAM_MOD@
MPROGS = @MPROGS@
-PROGS = $(PROGS1) $(PROGS2) $(MPROGS) bin/nmblookup bin/make_printerdef bin/pdbedit
+LPROGS = @WINBIND_LTARGETS@
+
+PROGS = $(PROGS1) $(PROGS2) $(MPROGS) bin/nmblookup bin/pdbedit
+TORTURE_PROGS = bin/smbtorture bin/msgtest bin/masktest bin/locktest bin/locktest2
+SHLIBS = libsmbclient
SCRIPTS = $(srcdir)/script/smbtar $(srcdir)/script/addtosmbpass $(srcdir)/script/convert_smbpasswd
TDB_OBJ = tdb/tdb.o tdb/spinlock.o tdb/tdbutil.o
-LIB_OBJ = lib/charcnv.o lib/charset.o lib/debug.o lib/fault.o \
- lib/getsmbpass.o lib/interface.o lib/kanji.o lib/md4.o \
+LIB_OBJ = lib/charcnv.o lib/debug.o lib/fault.o \
+ lib/getsmbpass.o lib/interface.o lib/md4.o \
lib/interfaces.o lib/pidfile.o lib/replace.o \
- lib/signal.o lib/system.o lib/doscalls.o lib/time.o \
+ lib/signal.o lib/system.o lib/time.o \
lib/ufc.o lib/genrand.o lib/username.o lib/access.o lib/smbrun.o \
- lib/bitmap.o lib/crc32.o lib/snprintf.o lib/wins_srv.o \
+ lib/bitmap.o lib/crc32.o lib/snprintf.o lib/dprintf.o lib/xfile.o lib/wins_srv.o \
lib/util_array.o lib/util_str.o lib/util_sid.o \
lib/util_unistr.o lib/util_file.o lib/sysacls.o \
lib/util.o lib/util_sock.o lib/util_sec.o smbd/ssl.o \
lib/talloc.o lib/hash.o lib/substitute.o lib/fsusage.o \
lib/ms_fnmatch.o lib/select.o lib/error.o lib/messages.o \
- nsswitch/wb_client.o nsswitch/wb_common.o $(TDB_OBJ)
+ lib/md5.o lib/hmacmd5.o lib/iconv.o lib/smbpasswd.o \
+ nsswitch/wb_client.o nsswitch/wb_common.o \
+ intl/lang_tdb.o $(TDB_OBJ)
READLINE_OBJ = lib/readline.o
UBIQX_OBJ = ubiqx/ubi_BinTree.o ubiqx/ubi_Cache.o ubiqx/ubi_SplayTree.o \
ubiqx/ubi_dLinkList.o ubiqx/ubi_sLinkList.o ubiqx/debugparse.o
-PARAM_OBJ = param/loadparm.o param/params.o
+PARAM_OBJ = param/loadparm.o param/params.o dynconfig.o
LIBSMB_OBJ = libsmb/clientgen.o libsmb/cliconnect.o libsmb/clifile.o \
+ libsmb/clikrb5.o libsmb/clispnego.o libsmb/asn1.o \
libsmb/clirap.o libsmb/clierror.o libsmb/climessage.o \
libsmb/clireadwrite.o libsmb/clilist.o libsmb/cliprint.o \
libsmb/clitrans.o libsmb/clisecdesc.o libsmb/clidgram.o \
libsmb/namequery.o libsmb/nmblib.o libsmb/clistr.o \
libsmb/nterr.o libsmb/smbdes.o libsmb/smbencrypt.o \
libsmb/smberr.o libsmb/credentials.o libsmb/pwd_cache.o \
+ libsmb/clioplock.o libsmb/errormap.o libsmb/clirap2.o \
libsmb/passchange.o libsmb/unexpected.o $(RPC_PARSE_OBJ1)
LIBMSRPC_OBJ = libsmb/cli_lsarpc.o libsmb/cli_samr.o libsmb/cli_spoolss.o \
- rpc_client/cli_pipe.o
+ libsmb/cli_netlogon.o libsmb/cli_srvsvc.o libsmb/cli_dfs.o \
+ libsmb/cli_reg.o \
+ rpc_client/cli_pipe.o libsmb/cli_pipe_util.o
+
+LIBMSRPC_PICOBJ = $(LIBMSRPC_OBJ:.o=.po)
RPC_SERVER_OBJ = rpc_server/srv_lsa.o rpc_server/srv_lsa_nt.o \
rpc_server/srv_lsa_hnd.o rpc_server/srv_netlog.o rpc_server/srv_netlog_nt.o \
rpc_server/srv_samr.o rpc_server/srv_samr_nt.o rpc_server/srv_srvsvc.o rpc_server/srv_srvsvc_nt.o \
rpc_server/srv_util.o rpc_server/srv_wkssvc.o rpc_server/srv_wkssvc_nt.o \
rpc_server/srv_pipe.o rpc_server/srv_dfs.o rpc_server/srv_dfs_nt.o \
- rpc_server/srv_spoolss.o rpc_server/srv_spoolss_nt.o
+ rpc_server/srv_spoolss.o rpc_server/srv_spoolss_nt.o \
+ lib/util_getent.o
# this includes only the low level parse code, not stuff
# that requires knowledge of security contexts
rpc_parse/parse_reg.o rpc_parse/parse_rpc.o \
rpc_parse/parse_samr.o rpc_parse/parse_srv.o \
rpc_parse/parse_wks.o \
- rpc_parse/parse_spoolss.o rpc_parse/parse_dfs.o \
- rpc_parse/parse_creds.o
+ rpc_parse/parse_spoolss.o rpc_parse/parse_dfs.o
RPC_CLIENT_OBJ = rpc_client/cli_netlogon.o rpc_client/cli_pipe.o \
- rpc_client/cli_lsarpc.o rpc_client/cli_connect.o \
- rpc_client/cli_use.o rpc_client/cli_login.o \
- rpc_client/cli_spoolss_notify.o rpc_client/ncacn_np_use.o \
- lib/util_list.o
+ rpc_client/cli_login.o rpc_client/cli_trust.o \
+ rpc_client/cli_spoolss_notify.o
LOCKING_OBJ = locking/locking.o locking/brlock.o locking/posix.o
PASSDB_OBJ = passdb/passdb.o passdb/secrets.o \
- passdb/pass_check.o passdb/smbpassfile.o \
- passdb/machine_sid.o passdb/pdb_smbpasswd.o \
- passdb/pdb_tdb.o passdb/pampass.o
+ passdb/machine_sid.o passdb/pdb_smbpasswd.o \
+ passdb/pdb_tdb.o passdb/pdb_ldap.o \
+ passdb/pdb_nisplus.o
GROUPDB_OBJ = groupdb/mapping.o
NOTIFY_OBJ = smbd/notify.o smbd/notify_hash.o smbd/notify_kernel.o
+PLAINTEXT_AUTH_OBJ = passdb/pampass.o passdb/pass_check.o
+
+AUTH_OBJ = smbd/auth.o smbd/auth_smbpasswd.o smbd/auth_server.o smbd/auth_domain.o \
+ smbd/auth_rhosts.o smbd/auth_unix.o smbd/auth_util.o $(PLAINTEXT_AUTH_OBJ) \
+ libsmb/domain_client_validate.o
+
+
SMBD_OBJ1 = smbd/server.o smbd/files.o smbd/chgpasswd.o smbd/connection.o \
smbd/utmp.o smbd/session.o \
smbd/dfree.o smbd/dir.o smbd/password.o smbd/conn.o smbd/fileio.o \
smbd/ipc.o smbd/lanman.o smbd/mangle.o smbd/negprot.o \
smbd/message.o smbd/nttrans.o smbd/pipes.o \
- smbd/reply.o smbd/trans2.o smbd/uid.o \
+ smbd/reply.o smbd/sesssetup.o smbd/trans2.o smbd/uid.o \
smbd/dosmode.o smbd/filename.o smbd/open.o smbd/close.o \
smbd/blocking.o smbd/sec_ctx.o \
smbd/vfs.o smbd/vfs-wrap.o smbd/statcache.o \
smbd/posix_acls.o \
smbd/process.o smbd/service.o smbd/error.o \
- printing/printfsp.o lib/util_seaccess.o smbd/srvstr.o
+ printing/printfsp.o lib/util_seaccess.o smbd/srvstr.o \
+ smbd/build_options.o
PRINTING_OBJ = printing/pcap.o printing/print_svid.o \
printing/print_cups.o printing/print_generic.o \
SMBD_OBJ = $(SMBD_OBJ1) $(MSDFS_OBJ) $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) \
$(RPC_SERVER_OBJ) $(RPC_CLIENT_OBJ) $(RPC_PARSE_OBJ) \
- $(LOCKING_OBJ) $(PASSDB_OBJ) $(PRINTING_OBJ) $(PROFILE_OBJ) $(LIB_OBJ) \
- $(PRINTBACKEND_OBJ) $(QUOTAOBJS) $(OPLOCK_OBJ) $(NOTIFY_OBJ) $(GROUPDB_OBJ)
-
+ $(LOCKING_OBJ) $(PASSDB_OBJ) $(PRINTING_OBJ) $(PROFILE_OBJ) \
+ $(LIB_OBJ) $(PRINTBACKEND_OBJ) $(QUOTAOBJS) $(OPLOCK_OBJ) \
+ $(NOTIFY_OBJ) $(GROUPDB_OBJ) $(AUTH_OBJ)
NMBD_OBJ1 = nmbd/asyncdns.o nmbd/nmbd.o nmbd/nmbd_become_dmb.o \
nmbd/nmbd_become_lmb.o nmbd/nmbd_browserdb.o \
nmbd/nmbd_workgroupdb.o nmbd/nmbd_synclists.o
NMBD_OBJ = $(NMBD_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) \
- $(LIB_OBJ)
+ $(PROFILE_OBJ) $(LIB_OBJ)
SWAT_OBJ = web/cgi.o web/diagnose.o web/startstop.o web/statuspage.o \
- web/swat.o $(PRINTING_OBJ) $(LIBSMB_OBJ) $(LOCKING_OBJ) \
+ web/swat.o web/neg_lang.o $(PRINTING_OBJ) $(LIBSMB_OBJ) $(LOCKING_OBJ) \
$(PARAM_OBJ) $(PASSDB_OBJ) $(RPC_CLIENT_OBJ) $(RPC_PARSE_OBJ) \
- $(UBIQX_OBJ) $(LIB_OBJ)
+ $(UBIQX_OBJ) $(LIB_OBJ) $(GROUPDB_OBJ) $(PLAINTEXT_AUTH_OBJ) \
+ smbwrapper/shared.o
SMBSH_OBJ = smbwrapper/smbsh.o smbwrapper/shared.o \
$(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
-MAKE_SMBCODEPAGE_OBJ = utils/make_smbcodepage.o $(PARAM_OBJ) \
- $(UBIQX_OBJ) $(LIB_OBJ)
-
-MAKE_UNICODEMAP_OBJ = utils/make_unicodemap.o $(PARAM_OBJ) \
- $(UBIQX_OBJ) $(LIB_OBJ)
-
MAKE_PRINTERDEF_OBJ = utils/make_printerdef.o $(PARAM_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ)
SMBCONTROL_OBJ = utils/smbcontrol.o $(LOCKING_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ)
+SMBTREE_OBJ = utils/smbtree.o $(LOCKING_OBJ) $(PARAM_OBJ) \
+ $(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ) $(LIBSMB_OBJ)
+
TESTPARM_OBJ = utils/testparm.o \
$(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
$(LIB_OBJ)
SMBPASSWD_OBJ = utils/smbpasswd.o $(PARAM_OBJ) \
- $(LIBSMB_OBJ) $(PASSDB_OBJ) \
- $(UBIQX_OBJ) $(RPC_CLIENT_OBJ) $(RPC_PARSE_OBJ) $(LIB_OBJ)
+ $(LIBSMB_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ)\
+ $(UBIQX_OBJ) $(RPC_CLIENT_OBJ) $(RPC_PARSE_OBJ) $(LIB_OBJ) \
+ libsmb/cli_lsarpc.o libsmb/cli_samr.o libsmb/cli_pipe_util.o
PDBEDIT_OBJ = utils/pdbedit.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(PASSDB_OBJ) \
- $(UBIQX_OBJ) $(LIB_OBJ)
+ $(UBIQX_OBJ) $(LIB_OBJ) $(GROUPDB_OBJ)
SMBGROUPEDIT_OBJ = utils/smbgroupedit.o $(GROUPDB_OBJ) $(PARAM_OBJ) \
$(LIBSMB_OBJ) $(PASSDB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
RPCCLIENT_OBJ1 = rpcclient/rpcclient.o rpcclient/cmd_lsarpc.o \
- rpcclient/cmd_samr.o rpcclient/cmd_spoolss.o
+ rpcclient/cmd_samr.o rpcclient/cmd_spoolss.o \
+ rpcclient/cmd_netlogon.o rpcclient/cmd_srvsvc.o \
+ rpcclient/cmd_dfs.o rpcclient/cmd_reg.o \
+ rpc_client/cli_login.o rpc_client/cli_netlogon.o
RPCCLIENT_OBJ = $(RPCCLIENT_OBJ1) \
$(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
$(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(LIBMSRPC_OBJ) \
- $(READLINE_OBJ)
+ $(READLINE_OBJ) $(GROUPDB_OBJ)
+
+SAMSYNC_OBJ1 = rpcclient/samsync.o rpc_client/cli_netlogon.o
+
+SAMSYNC_OBJ = $(SAMSYNC_OBJ1) \
+ $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
+ $(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(LIBMSRPC_OBJ) \
+ $(GROUPDB_OBJ)
PAM_WINBIND_OBJ = nsswitch/pam_winbind.po nsswitch/wb_common.po
$(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
$(READLINE_OBJ)
+NET_OBJ = utils/net.o $(LIBSMB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
+ @BUILD_POPT@
+
CUPS_OBJ = client/smbspool.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
MOUNT_OBJ = client/smbmount.o \
NMBLOOKUP_OBJ = utils/nmblookup.o $(PARAM_OBJ) $(UBIQX_OBJ) \
$(LIBSMB_OBJ) $(LIB_OBJ)
-SMBTORTURE_OBJ = utils/torture.o utils/nbio.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
- $(UBIQX_OBJ) $(LIB_OBJ)
+SMBTORTURE_OBJ = torture/torture.o torture/nbio.o torture/scanner.o torture/utable.o \
+ torture/denytest.o \
+ $(LIBSMB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
-MASKTEST_OBJ = utils/masktest.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
+MASKTEST_OBJ = torture/masktest.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ)
-MSGTEST_OBJ = utils/msgtest.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
+MSGTEST_OBJ = torture/msgtest.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ)
-LOCKTEST_OBJ = utils/locktest.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) \
+LOCKTEST_OBJ = torture/locktest.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ)
+LOCKTEST2_OBJ = torture/locktest2.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) \
+ $(UBIQX_OBJ) $(LIB_OBJ)
+
SMBCACLS_OBJ = utils/smbcacls.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_OBJ) \
- $(LIBMSRPC_OBJ)
+ $(LIBMSRPC_OBJ) $(GROUPDB_OBJ)
-LOCKTEST2_OBJ = utils/locktest2.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) \
- $(UBIQX_OBJ) $(LIB_OBJ)
-
-RPCTORTURE_OBJ = utils/rpctorture.o \
+RPCTORTURE_OBJ = torture/rpctorture.o \
rpcclient/display.o \
rpcclient/cmd_lsarpc.o \
rpcclient/cmd_wkssvc.o \
PROTO_OBJ = $(SMBD_OBJ) $(NMBD_OBJ) $(SWAT_OBJ) $(CLIENT_OBJ) \
$(SMBWRAPPER_OBJ) $(SMBTORTURE_OBJ) $(RPCCLIENT_OBJ1) \
- $(LIBMSRPC_OBJ) $(RPC_CLIENT_OBJ)
+ $(LIBMSRPC_OBJ) $(RPC_CLIENT_OBJ) $(AUTH_OBJ)
NSS_OBJ_0 = nsswitch/wins.o $(PARAM_OBJ) $(UBIQX_OBJ) $(LIBSMB_OBJ) $(LIB_OBJ) $(NSSWINS_OBJ)
NSS_OBJ = $(NSS_OBJ_0:.o=.po)
PICOBJS = $(SMBWRAPPER_OBJ:.o=.po)
PICOBJS32 = $(SMBWRAPPER_OBJ:.o=.po32)
-LIBSMBCLIENT_PICOBJS = $(LIBSMBCLIENT_OBJ:.0=.po)
+LIBSMBCLIENT_PICOBJS = $(LIBSMBCLIENT_OBJ:.o=.po)
PAM_SMBPASS_OBJ_0 = pam_smbpass/pam_smb_auth.o pam_smbpass/pam_smb_passwd.o \
pam_smbpass/pam_smb_acct.o pam_smbpass/support.o \
lib/debug.o lib/util_sid.o lib/messages.o lib/util_str.o \
lib/wins_srv.o lib/substitute.o lib/select.o lib/util.o \
nsswitch/wb_client.o nsswitch/wb_common.o \
- lib/system.o lib/charset.o lib/util_file.o lib/kanji.o \
+ lib/system.o lib/util_file.o \
lib/genrand.o lib/username.o lib/charcnv.o lib/time.o \
lib/md4.o lib/util_unistr.o lib/signal.o lib/talloc.o \
- lib/ms_fnmatch.o lib/util_sock.o lib/doscalls.o lib/smbrun.o \
+ lib/ms_fnmatch.o lib/util_sock.o lib/smbrun.o \
lib/util_sec.o \
ubiqx/ubi_sLinkList.o libsmb/smbencrypt.o libsmb/smbdes.o \
$(PARAM_OBJ) $(TDB_OBJ) $(PASSDB_OBJ)
PAM_SMBPASS_PICOOBJ = $(PAM_SMBPASS_OBJ_0:.o=.po)
+NSS_OBJ_0 = nsswitch/wins.o $(PARAM_OBJ) $(UBIQX_OBJ) $(LIBSMB_OBJ) $(LIB_OBJ) $(NSSWINS_OBJ)
+NSS_OBJ = $(NSS_OBJ_0:.o=.po)
+
WINBINDD_OBJ1 = \
nsswitch/winbindd.o \
nsswitch/winbindd_user.o \
nsswitch/winbindd_idmap.o \
nsswitch/winbindd_util.o \
nsswitch/winbindd_cache.o \
- nsswitch/winbindd_pam.o
+ nsswitch/winbindd_pam.o \
+ nsswitch/winbindd_sid.o \
+ nsswitch/winbindd_misc.o \
+ nsswitch/winbindd_cm.o
+
+NECESSARY_BECAUSE_SAMBA_DEPENDENCIES_ARE_SO_BROKEN_OBJ = \
+ rpc_client/cli_netlogon.o rpc_client/cli_login.o \
+ smbd/auth_util.o
WINBINDD_OBJ = \
- $(WINBINDD_OBJ1) \
- $(RPC_CLIENT_OBJ) $(RPC_PARSE_OBJ) $(STUB_UID_OBJ) \
+ $(WINBINDD_OBJ1) $(NOPROTO_OBJ) $(PASSDB_OBJ) \
$(LIBNMB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
- $(NSSWINS_OBJ) $(SIDDB_OBJ) $(LIBSMB_OBJ)
+ $(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(RPC_PARSE_OBJ) \
+ $(GROUPDB_OBJ) $(PROFILE_OBJ) \
+ $(NECESSARY_BECAUSE_SAMBA_DEPENDENCIES_ARE_SO_BROKEN_OBJ)
-WBINFO_OBJ = nsswitch/wbinfo.o
+WBINFO_OBJ = nsswitch/wbinfo.o libsmb/smbencrypt.o libsmb/smbdes.o
WINBIND_NSS_OBJ = nsswitch/winbind_nss.o nsswitch/wb_common.o
WINBIND_NSS_PICOBJS = $(WINBIND_NSS_OBJ:.o=.po)
-
-NSS_OBJ_0 = nsswitch/wins.o $(PARAM_OBJ) $(UBIQX_OBJ) $(LIBSMB_OBJ) $(LIB_OBJ) $(NSSWINS_OBJ)
-NSS_OBJ = $(NSS_OBJ_0:.o=.po)
+POPT_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
+ popt/popthelp.o popt/poptparse.o
######################################################################
# now the rules...
######################################################################
+all : SHOWFLAGS include/proto.h $(SPROGS) $(PROGS) $(SHLIBS) nsswitch
+
+pam_smbpass : SHOWFLAGS bin/pam_smbpass.@SHLIBEXT@
-all : CHECK $(SPROGS) $(PROGS)
+smbwrapper : SHOWFLAGS bin/smbsh bin/smbwrapper.@SHLIBEXT@ @WRAP32@
-pam_smbpass : CHECK bin/pam_smbpass.@SHLIBEXT@
+torture : SHOWFLAGS $(TORTURE_PROGS)
-smbwrapper : CHECK bin/smbsh bin/smbwrapper.@SHLIBEXT@ @WRAP32@
+smbtorture : SHOWFLAGS bin/smbtorture
-smbtorture : CHECK bin/smbtorture
+masktest : SHOWFLAGS bin/masktest
-masktest : CHECK bin/masktest
+msgtest : SHOWFLAGS bin/msgtest
-msgtest : CHECK bin/msgtest
+locktest : SHOWFLAGS bin/locktest
-locktest : CHECK bin/locktest
+smbcacls : SHOWFLAGS bin/smbcacls
-smbcacls : CHECK bin/smbcacls
+locktest2 : SHOWFLAGS bin/locktest2
-locktest2 : CHECK bin/locktest2
+rpctorture : SHOWFLAGS bin/rpctorture
-rpctorture : CHECK bin/rpctorture
+debug2html : SHOWFLAGS bin/debug2html
-debug2html : CHECK bin/debug2html
+smbfilter : SHOWFLAGS bin/smbfilter
-smbfilter : CHECK bin/smbfilter
+nsswitch : SHOWFLAGS @WINBIND_TARGETS@ @WINBIND_STARGETS@ @WINBIND_LTARGETS@
.SUFFIXES:
.SUFFIXES: .c .o .po .po32 .lo
-CHECK:
+SHOWFLAGS:
@echo "Using FLAGS = $(FLAGS)"
@echo "Using FLAGS32 = $(FLAGS32)"
@echo "Using LIBS = $(LIBS)"
mkdir "$$dir" || \
exec false; fi || exec false
-.c.o:
+.c.o:
@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
@echo Compiling $*.c
-o $@
@BROKEN_CC@ -mv `echo $@ | sed 's%^.*/%%g'` $@
-# This is for libtool
-.c.lo:
+# These dependencies are only approximately correct: we want to make
+# sure Samba's paths are updated if ./configure is re-run. Really it
+# would be nice if "make prefix=/opt/samba all" also rebuilt things,
+# but since we also require "make install prefix=/opt/samba" *not* to
+# rebuild it's a bit hard.
+
+dynconfig.o: dynconfig.c Makefile
+ @echo Compiling $*.c
+ @$(CC) $(FLAGS) $(PATH_FLAGS) -c $< -o $@
+
+dynconfig.po: dynconfig.c Makefile
@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
- @echo Compiling $< with libtool
- @$(LIBTOOL) --mode=compile \
- $(CC) -I. -I$(srcdir) $(FLAGS) -c $< \
- -o $@
+ @echo Compiling $*.c with @PICFLAG@
+ @$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@
+@BROKEN_CC@ -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
+@POBAD_CC@ @mv $*.po.o $@
.c.po:
@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
@echo Compiling $*.c with @PICFLAG@
- @$(CC) -I. -I$(srcdir) $(FLAGS) @PICFLAG@ -c $< \
- -o $*.po.o
-@BROKEN_CC@ -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@.o
- @mv $*.po.o $@
+ @$(CC) -I. -I$(srcdir) $(FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@
+@BROKEN_CC@ -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
+@POBAD_CC@ @mv $*.po.o $@
# this is for IRIX
.c.po32:
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(RPCCLIENT_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS)
+bin/samsync: $(SAMSYNC_OBJ) bin/.dummy
+ @echo Linking $@
+ @$(CC) $(FLAGS) -o $@ $(SAMSYNC_OBJ) $(LDFLAGS) $(LIBS)
+
bin/smbclient: $(CLIENT_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(CLIENT_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS)
+bin/net: $(NET_OBJ) bin/.dummy
+ @echo Linking $@
+ @$(CC) $(FLAGS) -o $@ $(NET_OBJ) $(LDFLAGS) $(LIBS)
+
bin/smbspool: $(CUPS_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(CUPS_OBJ) $(LDFLAGS) $(LIBS)
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBCONTROL_OBJ) $(LDFLAGS) $(LIBS)
+bin/smbtree: $(SMBTREE_OBJ) bin/.dummy
+ @echo Linking $@
+ @$(CC) $(FLAGS) -o $@ $(SMBTREE_OBJ) $(LDFLAGS) $(LIBS)
+
bin/smbpasswd: $(SMBPASSWD_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBPASSWD_OBJ) $(LDFLAGS) $(LIBS)
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBGROUPEDIT_OBJ) $(LDFLAGS) $(LIBS)
-bin/make_smbcodepage: $(MAKE_SMBCODEPAGE_OBJ) bin/.dummy
- @echo Linking $@
- @$(CC) $(FLAGS) -o $@ $(MAKE_SMBCODEPAGE_OBJ) $(LDFLAGS) $(LIBS)
-
-bin/make_unicodemap: $(MAKE_UNICODEMAP_OBJ) bin/.dummy
- @echo Linking $@
- @$(CC) $(FLAGS) -o $@ $(MAKE_UNICODEMAP_OBJ) $(LDFLAGS) $(LIBS)
-
bin/nmblookup: $(NMBLOOKUP_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(NMBLOOKUP_OBJ) $(LDFLAGS) $(LIBS)
bin/smbwrapper.@SHLIBEXT@: $(PICOBJS)
@echo Linking shared library $@
- @$(LD) @LDSHFLAGS@ -o $@ $(PICOBJS) $(LIBS)
+ @$(LD) $(LDSHFLAGS) -o $@ $(PICOBJS) $(LIBS)
bin/smbwrapper.32.@SHLIBEXT@: $(PICOBJS32)
@echo Linking shared library $@
- @$(LD) -32 @LDSHFLAGS@ -o $@ $(PICOBJS32) $(LIBS)
+ @$(LD) -32 $(LDSHFLAGS) -o $@ $(PICOBJS32) $(LIBS)
+
+bin/libsmbclient.@SHLIBEXT@: $(LIBSMBCLIENT_PICOBJS)
+ echo Linking libsmbclient shared library $@
+ $(SHLD) $(LDSHFLAGS) -o $@ $(LIBSMBCLIENT_PICOBJS) $(LIBS)
-bin/libsmbclient.so: $(LIBSMBCLIENT_PICOBJS)
- @echo Linking libsmbclient shared library $@
- @$(LD) -shared -o $@ $(LIBSMBCLIENT_PICOBJS) $(LIBS) # Anything else?
+bin/libsmbclient.a: $(LIBSMBCLIENT_PICOBJS)
+ @echo Linking libsmbclient non-shared library $@
+ -$(AR) -rc $@ $(LIBSMBCLIENT_PICOBJS)
-client/testsmbc: client/testsmbc.o bin/libsmbclient.so
- @echo Linking testsmbc
- @$(CC) $(CFLAGS) -o $@ client/testsmbc.o -Lbin -lsmbclient
+libsmbclient: bin/libsmbclient.a @LIBSMBCLIENT_SHARED@
bin/smbsh: $(SMBSH_OBJ) bin/.dummy
@echo Linking $@
nsswitch/libnss_wins.so: $(NSS_OBJ)
@echo "Linking $@"
- @$(LD) @LDSHFLAGS@ -o $@ $(NSS_OBJ) -lc
+ @$(LD) $(LDSHFLAGS) -o $@ $(NSS_OBJ) -lc
bin/winbindd: $(WINBINDD_OBJ) bin/.dummy
@echo Linking $@
nsswitch/libnss_winbind.so: $(WINBIND_NSS_PICOBJS)
@echo "Linking $@"
- @$(LINK) -shared -o $@ $(WINBIND_NSS_PICOBJS)
+ @$(LINK) $(LDSHFLAGS) -o $@ $(WINBIND_NSS_PICOBJS)
nsswitch/pam_winbind.so: $(PAM_WINBIND_OBJ) bin/.dummy
@echo Linking $@
- @$(LINK) -shared -o $@ $(PAM_WINBIND_OBJ)
+ @$(LINK) $(LDSHFLAGS) -o $@ $(PAM_WINBIND_OBJ)
bin/wbinfo: $(WBINFO_OBJ) $(PARAM_OBJ) $(LIB_OBJ) $(NOPROTO_OBJ) $(UBIQX_OBJ) bin/.dummy
@echo Linking $@
@$(LINK) -o $@ $(WBINFO_OBJ) $(PARAM_OBJ) $(LIB_OBJ) $(NOPROTO_OBJ) \
$(UBIQX_OBJ) $(LIBS)
-nsswitch: nsswitch/libnss_wins.so nsswitch/pam_winbind.so \
- nsswitch/libnss_winbind.so bin/wbinfo
-
bin/pam_smbpass.@SHLIBEXT@: $(PAM_SMBPASS_PICOOBJ)
@echo "Linking shared library $@"
- $(LD) @LDSHFLAGS@ -symbolic -o $@ $(PAM_SMBPASS_PICOOBJ) -lpam $(LIBS) -lc
+ $(LD) $(LDSHFLAGS) -symbolic -o $@ $(PAM_SMBPASS_PICOOBJ) -lpam $(LIBS) -lc
+
+bin/libmsrpc.a: $(LIBMSRPC_PICOBJ)
+ -$(AR) -rc $@ $(LIBMSRPC_PICOBJ)
+
+bin/spamsync: rpcclient/samsync.o bin/libmsrpc.a
+ @$(LINK) -o $@ rpcclient/samsync.o bin/libmsrpc.a \
+ $(UBIQX_OBJ) $(LIBS)
-install: installbin installman installscripts installcp installswat
+install: installbin installman installscripts installswat
installdirs:
- $(SHELL) $(srcdir)/install-sh -d -m $(INSTALLPERMS) \
- $(BASEDIR) $(SBINDIR) $(BINDIR) $(LIBDIR) $(VARDIR) $(CODEPAGEDIR)
+ -$(SHELL) $(srcdir)/install-sh -d -m $(INSTALLPERMS) \
+ $(BASEDIR) $(SBINDIR) $(BINDIR) $(LIBDIR) $(VARDIR)
installservers: all installdirs
@$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(BASEDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(SPROGS)
installscripts: installdirs
@$(SHELL) $(srcdir)/script/installscripts.sh $(INSTALLPERMS) $(BINDIR) $(SCRIPTS)
-installcp: installdirs
- @$(SHELL) $(srcdir)/script/installcp.sh $(srcdir) $(LIBDIR) $(CODEPAGEDIR) $(BINDIR) $(CODEPAGELIST)
-
installswat: installdirs
@$(SHELL) $(srcdir)/script/installswat.sh $(SWATDIR) $(srcdir)
installclientlib:
- @$(INSTALLCMD) bin/libsmbclient.so $(LIBDIR)
- @$(INSTALLCMD) -d ${prefix}/include
- @$(INSTALLCMD) include/libsmbclient.h ${prefix}/include
+ -$(INSTALLCMD) bin/libsmbclient.so $(LIBDIR)
+ -$(INSTALLCMD) -d ${prefix}/include
+ -$(INSTALLCMD) include/libsmbclient.h ${prefix}/include
# revert to the previously installed version
revert:
@$(SHELL) $(srcdir)/script/revert.sh $(BINDIR) $(PROGS) $(SCRIPTS)
installman:
- @$(SHELL) $(srcdir)/script/installman.sh $(MANDIR) $(srcdir) "@ROFF@"
+ @$(SHELL) $(srcdir)/script/installman.sh $(MANDIR) $(srcdir) $(man_langs) "@ROFF@"
+
+.PHONY: showlayout
+
+showlayout:
+ @echo "Samba will be installed into:"
+ @echo " basedir: $(BASEDIR)"
+ @echo " bindir: $(BINDIR)"
+ @echo " sbindir: $(SBINDIR)"
+ @echo " libdir: $(LIBDIR)"
+ @echo " vardir: $(VARDIR)"
+ @echo " mandir: $(MANDIR)"
+
-uninstall: uninstallman uninstallbin uninstallscripts uninstallcp
+uninstall: uninstallman uninstallbin uninstallscripts
uninstallman:
- @$(SHELL) $(srcdir)/script/uninstallman.sh $(MANDIR) $(srcdir)
+ @$(SHELL) $(srcdir)/script/uninstallman.sh $(MANDIR) $(srcdir) $(man_langs)
uninstallbin:
@$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(BASEDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(SPROGS)
uninstallscripts:
@$(SHELL) $(srcdir)/script/uninstallscripts.sh $(INSTALLPERMS) $(BINDIR) $(SCRIPTS)
-uninstallcp:
- @$(SHELL) $(srcdir)/script/uninstallcp.sh $(CODEPAGEDIR) $(CODEPAGELIST)
+clean: delheaders
+ -rm -f core */*~ *~ */*.o */*.po */*.po32 */*.@SHLIBEXT@ $(PROGS) $(SPROGS)
-clean:
- -rm -f core */*~ *~ */*.o */*.po */*.po32 */*.@SHLIBEXT@
+winbindd_proto:
+ @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
+ -h _WINBINDD_PROTO_H_ nsswitch/winbindd_proto.h \
+ $(WINBINDD_OBJ1)
-proto:
+delheaders:
+ @/bin/rm -f $(srcdir)/include/proto.h $(srcdir)/include/build_env.h
+
+# we want our generated headers to be rebuilt if they don't exist, but not rebuilt every time
+.headers.stamp: include/proto.h include/build_env.h
+ @[ -f $@ ] || touch $@
+
+$(PROTO_OBJ) : .headers.stamp
+
+include/proto.h:
@echo rebuilding include/proto.h
@cd $(srcdir) && $(AWK) -f script/mkproto.awk `echo $(PROTO_OBJ) | tr ' ' '\n' | sed -e 's/\.o/\.c/g' | sort -u | egrep -v 'ubiqx/|wrapped'` > include/proto.h
+include/build_env.h:
+ @echo rebuilding include/build_env.h
+ @cd $(srcdir) && $(SHELL) script/build_env.sh $(srcdir) $(builddir) $(CC) > include/build_env.h
+
+headers: delheaders include/proto.h include/build_env.h
+
+proto: headers
+
etags:
etags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/`
Makefile: $(srcdir)/Makefile.in config.status
@echo "WARNING: you need to run ./config.status"
+
+test_prefix=/tmp/test-samba
+# Run regression suite using the external "satyr" framework
+check:
+ @echo "** Sorry, samba self-test without installation does not work "
+ @echo "** yet. Please try specifying a scratch directory to"
+ @echo "** ./configure --prefix DIR"
+ @echo "** then run \"make install installcheck\""
+ exit 1
+
+# -rm -rf $(test_prefix)/lib
+# mkdir $(test_prefix)/lib -p ./testdir
+# PATH=$(builddir)/bin:$(PATH) \
+# SATYR_SUITEDIR=../testsuite/build_farm/ prefix=$(test_prefix) \
+# testdir=./testdir $(SHELL) satyr
+
+# Run regression suite on the installed version.
+
+# `installcheck'
+# Perform installation tests (if any). The user must build and
+# install the program before running the tests. You should not
+# assume that `$(bindir)' is in the search path.
+
+dangerous-installcheck:
+ mkdir -p $(BASEDIR)/lib
+ mkdir -p $(BASEDIR)/var
+ PATH=$(BINDIR):$(SBINDIR):$(PATH) \
+ SATYR_DISCOURAGE=1 \
+ SATYR_SUITEDIR=../testsuite/satyr/ prefix=$(BASEDIR) \
+ LIBSMB_PROG=$(SBINDIR)/smbd \
+ testdir=./testdir $(SHELL) satyr
+
git.samba.org / ira / wip.git / blobdiff