2 Unix SMB/Netbios implementation.
4 SMB parameters and setup
5 Copyright (C) Andrew Tridgell 1992-2000
6 Copyright (C) John H Terpstra 1996-2000
7 Copyright (C) Luke Kenneth Casson Leighton 1996-2000
8 Copyright (C) Paul Ashton 1998-2000
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #define BUFFER_SIZE (0xFFFF)
29 #define SAFETY_MARGIN 1024
30 #define LARGE_WRITEX_HDR_SIZE 65
33 #define DGRAM_PORT 138
42 #define _BOOL /* So we don't typedef BOOL again in vfs.h */
45 /* limiting size of ipc replies */
46 #define REALLOC(ptr,size) Realloc(ptr,MAX((size),4*1024))
50 #ifndef DEF_CREATE_MASK
51 #define DEF_CREATE_MASK (0755)
54 /* string manipulation flags - see clistr.c and srvstr.c */
55 #define STR_TERMINATE 1
59 #define STR_NOALIGN 16
61 /* how long to wait for secondary SMB packets (milli-seconds) */
62 #define SMB_SECONDARY_WAIT (60*1000)
67 /* this defines the error codes that receive_smb can put in smb_read_error */
68 #define READ_TIMEOUT 1
73 #define DIR_STRUCT_SIZE 43
75 /* these define all the command types recognised by the server - there
76 are lots of gaps so probably there are some rare commands that are not
79 #define pSETDIR '\377'
81 /* these define the attribute byte as seen by DOS */
82 #define aRONLY (1L<<0)
83 #define aHIDDEN (1L<<1)
84 #define aSYSTEM (1L<<2)
85 #define aVOLID (1L<<3)
98 #define DOS_OPEN_RDONLY 0
99 #define DOS_OPEN_WRONLY 1
100 #define DOS_OPEN_RDWR 2
101 #define DOS_OPEN_FCB 0xF
103 /* define shifts and masks for share and open modes. */
104 #define OPEN_MODE_MASK 0xF
105 #define SHARE_MODE_SHIFT 4
106 #define SHARE_MODE_MASK 0x7
107 #define GET_OPEN_MODE(x) ((x) & OPEN_MODE_MASK)
108 #define SET_OPEN_MODE(x) ((x) & OPEN_MODE_MASK)
109 #define GET_DENY_MODE(x) (((x)>>SHARE_MODE_SHIFT) & SHARE_MODE_MASK)
110 #define SET_DENY_MODE(x) (((x) & SHARE_MODE_MASK) <<SHARE_MODE_SHIFT)
112 /* Sync on open file (not sure if used anymore... ?) */
113 #define FILE_SYNC_OPENMODE (1<<14)
114 #define GET_FILE_SYNC_OPENMODE(x) (((x) & FILE_SYNC_OPENMODE) ? True : False)
116 /* allow delete on open file mode (used by NT SMB's). */
117 #define ALLOW_SHARE_DELETE (1<<15)
118 #define GET_ALLOW_SHARE_DELETE(x) (((x) & ALLOW_SHARE_DELETE) ? True : False)
119 #define SET_ALLOW_SHARE_DELETE(x) ((x) ? ALLOW_SHARE_DELETE : 0)
121 /* delete on close flag (used by NT SMB's). */
122 #define DELETE_ON_CLOSE_FLAG (1<<16)
123 #define GET_DELETE_ON_CLOSE_FLAG(x) (((x) & DELETE_ON_CLOSE_FLAG) ? True : False)
124 #define SET_DELETE_ON_CLOSE_FLAG(x) ((x) ? DELETE_ON_CLOSE_FLAG : 0)
126 /* was delete access requested in NT open ? */
127 #define DELETE_ACCESS_REQUESTED (1<<17)
128 #define GET_DELETE_ACCESS_REQUESTED(x) (((x) & DELETE_ACCESS_REQUESTED) ? True : False)
129 #define SET_DELETE_ACCESS_REQUESTED(x) ((x) ? DELETE_ACCESS_REQUESTED : 0)
131 /* open disposition values */
132 #define FILE_EXISTS_FAIL 0
133 #define FILE_EXISTS_OPEN 1
134 #define FILE_EXISTS_TRUNCATE 2
136 /* mask for open disposition. */
137 #define FILE_OPEN_MASK 0x3
139 #define GET_FILE_OPEN_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
140 #define SET_FILE_OPEN_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
142 /* The above can be OR'ed with... */
143 #define FILE_CREATE_IF_NOT_EXIST 0x10
144 #define FILE_FAIL_IF_NOT_EXIST 0
146 #define GET_FILE_CREATE_DISPOSITION(x) ((x) & (FILE_CREATE_IF_NOT_EXIST|FILE_FAIL_IF_NOT_EXIST))
149 #define STYPE_DISKTREE 0 /* Disk drive */
150 #define STYPE_PRINTQ 1 /* Spooler queue */
151 #define STYPE_DEVICE 2 /* Serial device */
152 #define STYPE_IPC 3 /* Interprocess communication (IPC) */
153 #define STYPE_HIDDEN 0x80000000 /* share is a hidden one (ends with $) */
159 #define PSTRING_LEN 1024
160 #define FSTRING_LEN 256
162 typedef char pstring[PSTRING_LEN];
163 typedef char fstring[FSTRING_LEN];
170 * SMB UCS2 (16-bit unicode) internal type.
173 typedef uint16 smb_ucs2_t;
175 /* ucs2 string types. */
176 typedef smb_ucs2_t wpstring[PSTRING_LEN];
177 typedef smb_ucs2_t wfstring[FSTRING_LEN];
180 #ifdef WORDS_BIGENDIAN
186 /* turn a 7 bit character into a ucs2 character */
187 #define UCS2_CHAR(c) ((c) << UCS2_SHIFT)
189 /* pipe string names */
190 #define PIPE_LANMAN "\\PIPE\\LANMAN"
191 #define PIPE_SRVSVC "\\PIPE\\srvsvc"
192 #define PIPE_SAMR "\\PIPE\\samr"
193 #define PIPE_WINREG "\\PIPE\\winreg"
194 #define PIPE_WKSSVC "\\PIPE\\wkssvc"
195 #define PIPE_NETLOGON "\\PIPE\\NETLOGON"
196 #define PIPE_NTLSA "\\PIPE\\ntlsa"
197 #define PIPE_NTSVCS "\\PIPE\\ntsvcs"
198 #define PIPE_LSASS "\\PIPE\\lsass"
199 #define PIPE_LSARPC "\\PIPE\\lsarpc"
200 #define PIPE_SPOOLSS "\\PIPE\\spoolss"
201 #define PIPE_NETDFS "\\PIPE\\netdfs"
203 /* 64 bit time (100usec) since ????? - cifs6.txt, section 3.5, page 30 */
204 typedef struct nttime_info
211 /* the following rather strange looking definitions of NTSTATUS and WERROR
212 and there in order to catch common coding errors where different error types
213 are mixed up. This is especially important as we slowly convert Samba
214 from using BOOL for internal functions
216 #if defined(HAVE_IMMEDIATE_STRUCTURES)
217 typedef struct {uint32 v;} NTSTATUS;
218 #define NT_STATUS(x) ((NTSTATUS) { x })
219 #define NT_STATUS_V(x) ((x).v)
221 typedef uint32 NTSTATUS;
222 #define NT_STATUS(x) (x)
223 #define NT_STATUS_V(x) (x)
226 #if defined(HAVE_IMMEDIATE_STRUCTURES)
227 typedef struct {uint32 v;} WERROR;
228 #define W_ERROR(x) ((WERROR) { x })
229 #define W_ERROR_V(x) ((x).v)
231 typedef uint32 WERROR;
232 #define W_ERROR(x) (x)
233 #define W_ERROR_V(x) (x)
236 #define NT_STATUS_IS_OK(x) (NT_STATUS_V(x) == 0)
237 #define NT_STATUS_IS_ERR(x) ((NT_STATUS_V(x) & 0xc0000000) == 0xc0000000)
238 #define NT_STATUS_EQUAL(x,y) (NT_STATUS_V(x) == NT_STATUS_V(y))
239 #define W_ERROR_IS_OK(x) (W_ERROR_V(x) == 0)
242 /* Allowable account control bits */
243 #define ACB_DISABLED 0x0001 /* 1 = User account disabled */
244 #define ACB_HOMDIRREQ 0x0002 /* 1 = Home directory required */
245 #define ACB_PWNOTREQ 0x0004 /* 1 = User password not required */
246 #define ACB_TEMPDUP 0x0008 /* 1 = Temporary duplicate account */
247 #define ACB_NORMAL 0x0010 /* 1 = Normal user account */
248 #define ACB_MNS 0x0020 /* 1 = MNS logon user account */
249 #define ACB_DOMTRUST 0x0040 /* 1 = Interdomain trust account */
250 #define ACB_WSTRUST 0x0080 /* 1 = Workstation trust account */
251 #define ACB_SVRTRUST 0x0100 /* 1 = Server trust account */
252 #define ACB_PWNOEXP 0x0200 /* 1 = User password does not expire */
253 #define ACB_AUTOLOCK 0x0400 /* 1 = Account auto locked */
255 #define MAX_HOURS_LEN 32
276 #define MAXSUBAUTHS 15 /* max sub authorities in a SID */
281 * @brief Security Identifier
283 * @sa http://msdn.microsoft.com/library/default.asp?url=/library/en-us/security/accctrl_38yn.asp
285 typedef struct sid_info
287 uint8 sid_rev_num; /**< SID revision number */
288 uint8 num_auths; /**< Number of sub-authorities */
289 uint8 id_auth[6]; /**< Identifier Authority */
291 * Pointer to sub-authorities.
293 * @note The values in these uint32's are in *native* byteorder, not
294 * neccessarily little-endian...... JRA.
296 uint32 sub_auths[MAXSUBAUTHS];
303 * The complete list of SIDS belonging to this user.
304 * Created when a vuid is registered.
305 * The definition of the user_sids array is as follows :
307 * token->user_sids[0] = primary user SID.
308 * token->user_sids[1] = primary group SID.
309 * token->user_sids[2..num_sids] = supplementary group SIDS.
312 #define PRIMARY_USER_SID_INDEX 0
313 #define PRIMARY_GROUP_SID_INDEX 1
315 #ifndef _NT_USER_TOKEN
316 typedef struct _nt_user_token {
320 #define _NT_USER_TOKEN
323 /*** query a local group, get a list of these: shows who is in that group ***/
325 /* local group member info */
326 typedef struct local_grp_member_info
328 DOM_SID sid ; /* matches with name */
329 uint8 sid_use; /* usr=1 grp=2 dom=3 alias=4 wkng=5 del=6 inv=7 unk=8 */
330 fstring name ; /* matches with sid: must be of the form "DOMAIN\account" */
334 /* enumerate these to get list of local groups */
336 /* local group info */
337 typedef struct local_grp_info
344 /*** enumerate these to get list of domain groups ***/
346 /* domain group member info */
347 typedef struct domain_grp_info
351 uint32 rid; /* group rid */
352 uint8 attr; /* attributes forced to be set to 0x7: SE_GROUP_xxx */
356 /*** query a domain group, get a list of these: shows who is in that group ***/
358 /* domain group info */
359 typedef struct domain_grp_member_info
362 uint8 attr; /* attributes forced to be set to 0x7: SE_GROUP_xxx */
366 /* 32 bit time (sec) since 01jan1970 - cifs6.txt, section 3.5, page 30 */
367 typedef struct time_info
372 /* Structure used when SMBwritebmpx is active */
375 size_t wr_total_written; /* So we know when to discard this */
378 int32 wr_error; /* Cached errors */
379 BOOL wr_mode; /* write through mode) */
380 BOOL wr_discard; /* discard all further data */
383 typedef struct write_cache
396 smb_ucs2_t *unixname;
398 SMB_STRUCT_STAT *statinfo;
402 typedef struct files_struct
404 struct files_struct *next, *prev;
406 struct connection_struct *conn;
411 BOOL delete_on_close;
416 write_bmpx_struct *wbmpx_ptr;
418 struct timeval open_time;
420 time_t pending_modtime;
422 int sent_oplock_break;
423 unsigned long file_id;
430 BOOL directory_delete_on_close;
436 * Structure used to keep directory state information around.
437 * Used in NT change-notify code.
448 uid_t list[UID_CACHE_SIZE];
455 } name_compare_entry;
457 /* Include VFS stuff */
461 typedef struct connection_struct
463 struct connection_struct *next, *prev;
464 unsigned cnum; /* an index passed over the wire */
467 struct uid_cache uid_cache;
477 struct vfs_ops vfs_ops; /* Filesystem operations */
478 /* Handle on dlopen() call */
481 char *user; /* name of user who *opened* this connection */
482 uid_t uid; /* uid of user who *opened* this connection */
483 gid_t gid; /* gid of user who *opened* this connection */
484 char client_address[18]; /* String version of client IP address. */
486 uint16 vuid; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */
488 /* following groups stuff added by ih */
490 /* This groups info is valid for the user that *opened* the connection */
493 NT_USER_TOKEN *nt_user_token;
498 name_compare_entry *hide_list; /* Per-share list of files to return as hidden. */
499 name_compare_entry *veto_list; /* Per-share list of files to veto (never show). */
500 name_compare_entry *veto_oplock_list; /* Per-share list of files to refuse oplocks on. */
506 connection_struct *conn;
512 NT_USER_TOKEN *nt_user_token;
515 /* Defines for the sent_oplock_break field above. */
516 #define NO_BREAK_SENT 0
517 #define EXCLUSIVE_BREAK_SENT 1
518 #define LEVEL_II_BREAK_SENT 2
521 fstring smb_name; /* user name from the client */
522 fstring unix_name; /* unix user name of a validated user */
523 fstring full_name; /* to store full name (such as "Joe Bloggs") from gecos field of password file */
524 fstring domain; /* domain that the client specified */
527 /* Extra fields above "LPQ_PRINTING" are used to map extra NT status codes. */
529 enum {LPQ_QUEUED=0,LPQ_PAUSED,LPQ_SPOOLING,LPQ_PRINTING,LPQ_ERROR,LPQ_DELETING,
530 LPQ_OFFLINE,LPQ_PAPEROUT,LPQ_PRINTED,LPQ_DELETED,LPQ_BLOCKED,LPQ_USER_INTERVENTION};
532 typedef struct _print_queue_struct
541 } print_queue_struct;
543 enum {LPSTAT_OK, LPSTAT_STOPPED, LPSTAT_ERROR};
550 } print_status_struct;
552 /* used for server information: client, nameserv and ipc */
553 struct server_info_struct
558 fstring domain; /* used ONLY in ipc.c NOT namework.c */
559 BOOL server_added; /* used ONLY in ipc.c NOT namework.c */
563 /* used for network interfaces */
566 struct interface *next, *prev;
568 struct in_addr bcast;
569 struct in_addr nmask;
572 /* struct returned by get_share_modes */
581 unsigned long share_file_id;
585 #define SHAREMODE_FN_CAST() \
586 void (*)(share_mode_entry *, char*)
588 #define SHAREMODE_FN(fn) \
589 void (*fn)(share_mode_entry *, char*)
591 typedef struct sam_passwd
593 time_t logon_time; /* logon time */
594 time_t logoff_time; /* logoff time */
595 time_t kickoff_time; /* kickoff time */
596 time_t pass_last_set_time; /* password last set time */
597 time_t pass_can_change_time; /* password can change time */
598 time_t pass_must_change_time; /* password must change time */
600 pstring username; /* UNIX username string */
601 pstring domain; /* Windows Domain name */
602 pstring nt_username; /* Windows username string */
603 pstring full_name; /* user's full name string */
604 pstring home_dir; /* home directory string */
605 pstring dir_drive; /* home directory drive string */
606 pstring logon_script; /* logon script string */
607 pstring profile_path; /* profile path string */
608 pstring acct_desc ; /* user description string */
609 pstring workstations; /* login from workstations string */
610 pstring unknown_str ; /* don't know what this is, yet. */
611 pstring munged_dial ; /* munged path name and dial-back tel number */
613 uid_t *uid; /* this is a pointer to the unix uid_t */
614 gid_t *gid; /* this is a pointer to the unix gid_t */
615 uint32 user_rid; /* Primary User ID */
616 uint32 group_rid; /* Primary Group ID */
618 unsigned char *lm_pw; /* Null if no password */
619 unsigned char *nt_pw; /* Null if no password */
621 uint16 acct_ctrl; /* account info (ACB_xxxx bit-mask) */
622 uint32 unknown_3; /* 0x00ff ffff */
624 uint16 logon_divs; /* 168 - number of hours in a week */
625 uint32 hours_len; /* normally 21 bytes */
626 uint8 hours[MAX_HOURS_LEN];
628 uint32 unknown_5; /* 0x0002 0000 */
629 uint32 unknown_6; /* 0x0000 04ec */
634 * Flags for account policy.
636 #define AP_MIN_PASSWORD_LEN 1
637 #define AP_PASSWORD_HISTORY 2
638 #define AP_USER_MUST_LOGON_TO_CHG_PASS 3
639 #define AP_MAX_PASSWORD_AGE 4
640 #define AP_MIN_PASSWORD_AGE 5
641 #define AP_LOCK_ACCOUNT_DURATION 6
642 #define AP_RESET_COUNT_TIME 7
643 #define AP_BAD_ATTEMPT_LOCKOUT 8
644 #define AP_TIME_TO_LOGOUT 9
648 * Flags for local user manipulation.
651 #define LOCAL_ADD_USER 0x1
652 #define LOCAL_DELETE_USER 0x2
653 #define LOCAL_DISABLE_USER 0x4
654 #define LOCAL_ENABLE_USER 0x8
655 #define LOCAL_TRUST_ACCOUNT 0x10
656 #define LOCAL_SET_NO_PASSWORD 0x20
657 #define LOCAL_SET_PASSWORD 0x40
658 #define LOCAL_SET_LDAP_ADMIN_PW 0x80
660 /* key and data in the connections database - used in smbstatus and smbd */
661 struct connections_key {
667 struct connections_data {
675 char machine[FSTRING_LEN];
680 /* key and data records in the tdb locking database */
686 struct locking_data {
688 int num_share_mode_entries;
689 share_mode_entry dummy; /* Needed for alignment. */
691 /* the following two entries are implicit
692 share_mode_entry modes[num_share_mode_entries];
698 /* the following are used by loadparm for option lists */
701 P_BOOL,P_BOOLREV,P_CHAR,P_INTEGER,P_OCTAL,P_LIST,
702 P_STRING,P_USTRING,P_GSTRING,P_UGSTRING,P_ENUM,P_SEP
707 P_LOCAL,P_GLOBAL,P_SEPARATOR,P_NONE
710 /* passed to br lock code */
711 enum brl_type {READ_LOCK, WRITE_LOCK};
718 #define BRLOCK_FN_CAST() \
719 void (*)(SMB_DEV_T dev, SMB_INO_T ino, int pid, \
720 enum brl_type lock_type, \
721 br_off start, br_off size)
722 #define BRLOCK_FN(fn) \
723 void (*fn)(SMB_DEV_T dev, SMB_INO_T ino, int pid, \
724 enum brl_type lock_type, \
725 br_off start, br_off size)
732 BOOL (*special)(char *, char **);
733 struct enum_list *enum_list;
749 #define FLAG_BASIC 0x01 /* fundamental options */
750 #define FLAG_SHARE 0x02 /* file sharing options */
751 #define FLAG_PRINT 0x04 /* printing options */
752 #define FLAG_GLOBAL 0x08 /* local options that should be globally settable in SWAT */
753 #define FLAG_DEPRECATED 0x10 /* options that should no longer be used */
754 #define FLAG_HIDE 0x20 /* options that should be hidden in SWAT */
756 #ifndef LOCKING_VERSION
757 #define LOCKING_VERSION 4
758 #endif /* LOCKING_VERSION */
761 /* the basic packet size, assuming no words or bytes */
764 /* offsets into message for common items */
797 /* flag defines. CIFS spec 3.1.1 */
798 #define FLAG_SUPPORT_LOCKREAD 0x01
799 #define FLAG_CLIENT_BUF_AVAIL 0x02
800 #define FLAG_RESERVED 0x04
801 #define FLAG_CASELESS_PATHNAMES 0x08
802 #define FLAG_CANONICAL_PATHNAMES 0x10
803 #define FLAG_REQUEST_OPLOCK 0x20
804 #define FLAG_REQUEST_BATCH_OPLOCK 0x40
805 #define FLAG_REPLY 0x80
808 #define SMBmkdir 0x00 /* create directory */
809 #define SMBrmdir 0x01 /* delete directory */
810 #define SMBopen 0x02 /* open file */
811 #define SMBcreate 0x03 /* create file */
812 #define SMBclose 0x04 /* close file */
813 #define SMBflush 0x05 /* flush file */
814 #define SMBunlink 0x06 /* delete file */
815 #define SMBmv 0x07 /* rename file */
816 #define SMBgetatr 0x08 /* get file attributes */
817 #define SMBsetatr 0x09 /* set file attributes */
818 #define SMBread 0x0A /* read from file */
819 #define SMBwrite 0x0B /* write to file */
820 #define SMBlock 0x0C /* lock byte range */
821 #define SMBunlock 0x0D /* unlock byte range */
822 #define SMBctemp 0x0E /* create temporary file */
823 #define SMBmknew 0x0F /* make new file */
824 #define SMBchkpth 0x10 /* check directory path */
825 #define SMBexit 0x11 /* process exit */
826 #define SMBlseek 0x12 /* seek */
827 #define SMBtcon 0x70 /* tree connect */
828 #define SMBtconX 0x75 /* tree connect and X*/
829 #define SMBtdis 0x71 /* tree disconnect */
830 #define SMBnegprot 0x72 /* negotiate protocol */
831 #define SMBdskattr 0x80 /* get disk attributes */
832 #define SMBsearch 0x81 /* search directory */
833 #define SMBsplopen 0xC0 /* open print spool file */
834 #define SMBsplwr 0xC1 /* write to print spool file */
835 #define SMBsplclose 0xC2 /* close print spool file */
836 #define SMBsplretq 0xC3 /* return print queue */
837 #define SMBsends 0xD0 /* send single block message */
838 #define SMBsendb 0xD1 /* send broadcast message */
839 #define SMBfwdname 0xD2 /* forward user name */
840 #define SMBcancelf 0xD3 /* cancel forward */
841 #define SMBgetmac 0xD4 /* get machine name */
842 #define SMBsendstrt 0xD5 /* send start of multi-block message */
843 #define SMBsendend 0xD6 /* send end of multi-block message */
844 #define SMBsendtxt 0xD7 /* send text of multi-block message */
847 #define SMBlockread 0x13 /* Lock a range and read */
848 #define SMBwriteunlock 0x14 /* Unlock a range then write */
849 #define SMBreadbraw 0x1a /* read a block of data with no smb header */
850 #define SMBwritebraw 0x1d /* write a block of data with no smb header */
851 #define SMBwritec 0x20 /* secondary write request */
852 #define SMBwriteclose 0x2c /* write a file then close it */
854 /* dos extended protocol */
855 #define SMBreadBraw 0x1A /* read block raw */
856 #define SMBreadBmpx 0x1B /* read block multiplexed */
857 #define SMBreadBs 0x1C /* read block (secondary response) */
858 #define SMBwriteBraw 0x1D /* write block raw */
859 #define SMBwriteBmpx 0x1E /* write block multiplexed */
860 #define SMBwriteBs 0x1F /* write block (secondary request) */
861 #define SMBwriteC 0x20 /* write complete response */
862 #define SMBsetattrE 0x22 /* set file attributes expanded */
863 #define SMBgetattrE 0x23 /* get file attributes expanded */
864 #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
865 #define SMBtrans 0x25 /* transaction - name, bytes in/out */
866 #define SMBtranss 0x26 /* transaction (secondary request/response) */
867 #define SMBioctl 0x27 /* IOCTL */
868 #define SMBioctls 0x28 /* IOCTL (secondary request/response) */
869 #define SMBcopy 0x29 /* copy */
870 #define SMBmove 0x2A /* move */
871 #define SMBecho 0x2B /* echo */
872 #define SMBopenX 0x2D /* open and X */
873 #define SMBreadX 0x2E /* read and X */
874 #define SMBwriteX 0x2F /* write and X */
875 #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
876 #define SMBffirst 0x82 /* find first */
877 #define SMBfunique 0x83 /* find unique */
878 #define SMBfclose 0x84 /* find close */
879 #define SMBkeepalive 0x85 /* keepalive */
880 #define SMBinvalid 0xFE /* invalid command */
882 /* Extended 2.0 protocol */
883 #define SMBtrans2 0x32 /* TRANS2 protocol set */
884 #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
885 #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
886 #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
887 #define SMBulogoffX 0x74 /* user logoff */
889 /* NT SMB extensions. */
890 #define SMBnttrans 0xA0 /* NT transact */
891 #define SMBnttranss 0xA1 /* NT transact secondary */
892 #define SMBntcreateX 0xA2 /* NT create and X */
893 #define SMBntcancel 0xA4 /* NT cancel */
895 /* These are the TRANS2 sub commands */
896 #define TRANSACT2_OPEN 0
897 #define TRANSACT2_FINDFIRST 1
898 #define TRANSACT2_FINDNEXT 2
899 #define TRANSACT2_QFSINFO 3
900 #define TRANSACT2_SETFSINFO 4
901 #define TRANSACT2_QPATHINFO 5
902 #define TRANSACT2_SETPATHINFO 6
903 #define TRANSACT2_QFILEINFO 7
904 #define TRANSACT2_SETFILEINFO 8
905 #define TRANSACT2_FSCTL 9
906 #define TRANSACT2_IOCTL 0xA
907 #define TRANSACT2_FINDNOTIFYFIRST 0xB
908 #define TRANSACT2_FINDNOTIFYNEXT 0xC
909 #define TRANSACT2_MKDIR 0xD
910 #define TRANSACT2_SESSION_SETUP 0xE
911 #define TRANSACT2_GET_DFS_REFERRAL 0x10
912 #define TRANSACT2_REPORT_DFS_INCONSISTANCY 0x11
914 /* These are the NT transact sub commands. */
915 #define NT_TRANSACT_CREATE 1
916 #define NT_TRANSACT_IOCTL 2
917 #define NT_TRANSACT_SET_SECURITY_DESC 3
918 #define NT_TRANSACT_NOTIFY_CHANGE 4
919 #define NT_TRANSACT_RENAME 5
920 #define NT_TRANSACT_QUERY_SECURITY_DESC 6
922 /* Relevant IOCTL codes */
923 #define IOCTL_QUERY_JOB_INFO 0x530060
925 /* these are the trans2 sub fields for primary requests */
926 #define smb_tpscnt smb_vwv0
927 #define smb_tdscnt smb_vwv1
928 #define smb_mprcnt smb_vwv2
929 #define smb_mdrcnt smb_vwv3
930 #define smb_msrcnt smb_vwv4
931 #define smb_flags smb_vwv5
932 #define smb_timeout smb_vwv6
933 #define smb_pscnt smb_vwv9
934 #define smb_psoff smb_vwv10
935 #define smb_dscnt smb_vwv11
936 #define smb_dsoff smb_vwv12
937 #define smb_suwcnt smb_vwv13
938 #define smb_setup smb_vwv14
939 #define smb_setup0 smb_setup
940 #define smb_setup1 (smb_setup+2)
941 #define smb_setup2 (smb_setup+4)
943 /* these are for the secondary requests */
944 #define smb_spscnt smb_vwv2
945 #define smb_spsoff smb_vwv3
946 #define smb_spsdisp smb_vwv4
947 #define smb_sdscnt smb_vwv5
948 #define smb_sdsoff smb_vwv6
949 #define smb_sdsdisp smb_vwv7
950 #define smb_sfid smb_vwv8
952 /* and these for responses */
953 #define smb_tprcnt smb_vwv0
954 #define smb_tdrcnt smb_vwv1
955 #define smb_prcnt smb_vwv3
956 #define smb_proff smb_vwv4
957 #define smb_prdisp smb_vwv5
958 #define smb_drcnt smb_vwv6
959 #define smb_droff smb_vwv7
960 #define smb_drdisp smb_vwv8
962 /* these are for the NT trans primary request. */
963 #define smb_nt_MaxSetupCount smb_vwv0
964 #define smb_nt_Flags (smb_vwv0 + 1)
965 #define smb_nt_TotalParameterCount (smb_vwv0 + 3)
966 #define smb_nt_TotalDataCount (smb_vwv0 + 7)
967 #define smb_nt_MaxParameterCount (smb_vwv0 + 11)
968 #define smb_nt_MaxDataCount (smb_vwv0 + 15)
969 #define smb_nt_ParameterCount (smb_vwv0 + 19)
970 #define smb_nt_ParameterOffset (smb_vwv0 + 23)
971 #define smb_nt_DataCount (smb_vwv0 + 27)
972 #define smb_nt_DataOffset (smb_vwv0 + 31)
973 #define smb_nt_SetupCount (smb_vwv0 + 35)
974 #define smb_nt_Function (smb_vwv0 + 36)
975 #define smb_nt_SetupStart (smb_vwv0 + 38)
977 /* these are for the NT trans secondary request. */
978 #define smb_nts_TotalParameterCount (smb_vwv0 + 3)
979 #define smb_nts_TotalDataCount (smb_vwv0 + 7)
980 #define smb_nts_ParameterCount (smb_vwv0 + 11)
981 #define smb_nts_ParameterOffset (smb_vwv0 + 15)
982 #define smb_nts_ParameterDisplacement (smb_vwv0 + 19)
983 #define smb_nts_DataCount (smb_vwv0 + 23)
984 #define smb_nts_DataOffset (smb_vwv0 + 27)
985 #define smb_nts_DataDisplacement (smb_vwv0 + 31)
987 /* these are for the NT trans reply. */
988 #define smb_ntr_TotalParameterCount (smb_vwv0 + 3)
989 #define smb_ntr_TotalDataCount (smb_vwv0 + 7)
990 #define smb_ntr_ParameterCount (smb_vwv0 + 11)
991 #define smb_ntr_ParameterOffset (smb_vwv0 + 15)
992 #define smb_ntr_ParameterDisplacement (smb_vwv0 + 19)
993 #define smb_ntr_DataCount (smb_vwv0 + 23)
994 #define smb_ntr_DataOffset (smb_vwv0 + 27)
995 #define smb_ntr_DataDisplacement (smb_vwv0 + 31)
997 /* these are for the NT create_and_X */
998 #define smb_ntcreate_NameLength (smb_vwv0 + 5)
999 #define smb_ntcreate_Flags (smb_vwv0 + 7)
1000 #define smb_ntcreate_RootDirectoryFid (smb_vwv0 + 11)
1001 #define smb_ntcreate_DesiredAccess (smb_vwv0 + 15)
1002 #define smb_ntcreate_AllocationSize (smb_vwv0 + 19)
1003 #define smb_ntcreate_FileAttributes (smb_vwv0 + 27)
1004 #define smb_ntcreate_ShareAccess (smb_vwv0 + 31)
1005 #define smb_ntcreate_CreateDisposition (smb_vwv0 + 35)
1006 #define smb_ntcreate_CreateOptions (smb_vwv0 + 39)
1007 #define smb_ntcreate_ImpersonationLevel (smb_vwv0 + 43)
1008 #define smb_ntcreate_SecurityFlags (smb_vwv0 + 47)
1010 /* this is used on a TConX. I'm not sure the name is very helpful though */
1011 #define SMB_SUPPORT_SEARCH_BITS 0x0001
1012 #define SMB_SHARE_IN_DFS 0x0002
1014 /* Named pipe write mode flags. Used in writeX calls. */
1015 #define PIPE_RAW_MODE 0x4
1016 #define PIPE_START_MESSAGE 0x8
1018 /* these are the constants used in the above call. */
1020 /* File Specific access rights. */
1021 #define FILE_READ_DATA 0x001
1022 #define FILE_WRITE_DATA 0x002
1023 #define FILE_APPEND_DATA 0x004
1024 #define FILE_READ_EA 0x008
1025 #define FILE_WRITE_EA 0x010
1026 #define FILE_EXECUTE 0x020
1027 #define FILE_DELETE_CHILD 0x040
1028 #define FILE_READ_ATTRIBUTES 0x080
1029 #define FILE_WRITE_ATTRIBUTES 0x100
1031 #define FILE_ALL_ACCESS 0x1FF
1033 /* the desired access to use when opening a pipe */
1034 #define DESIRED_ACCESS_PIPE 0x2019f
1036 /* Generic access masks & rights. */
1037 #define SPECIFIC_RIGHTS_MASK 0x00FFFFL
1038 #define STANDARD_RIGHTS_MASK 0xFF0000L
1039 #define DELETE_ACCESS (1L<<16)
1040 #define READ_CONTROL_ACCESS (1L<<17)
1041 #define WRITE_DAC_ACCESS (1L<<18)
1042 #define WRITE_OWNER_ACCESS (1L<<19)
1043 #define SYNCHRONIZE_ACCESS (1L<<20)
1045 /* Combinations of standard masks. */
1046 #define STANDARD_RIGHTS_ALL_ACCESS (DELETE_ACCESS|READ_CONTROL_ACCESS|WRITE_DAC_ACCESS|WRITE_OWNER_ACCESS|SYNCHRONIZE_ACCESS)
1047 #define STANDARD_RIGHTS_EXECUTE_ACCESS (READ_CONTROL_ACCESS)
1048 #define STANDARD_RIGHTS_READ_ACCESS (READ_CONTROL_ACCESS)
1049 #define STANDARD_RIGHTS_REQUIRED_ACCESS (DELETE_ACCESS|READ_CONTROL_ACCESS|WRITE_DAC_ACCESS|WRITE_OWNER_ACCESS)
1050 #define STANDARD_RIGHTS_WRITE_ACCESS (READ_CONTROL_ACCESS)
1052 #define SYSTEM_SECURITY_ACCESS (1L<<24)
1053 #define MAXIMUM_ALLOWED_ACCESS (1L<<25)
1054 #define GENERIC_ALL_ACCESS (1<<28)
1055 #define GENERIC_EXECUTE_ACCESS (1<<29)
1056 #define GENERIC_WRITE_ACCESS (1<<30)
1057 #define GENERIC_READ_ACCESS (((unsigned)1)<<31)
1059 /* Mapping of generic access rights for files to specific rights. */
1061 #define FILE_GENERIC_ALL (STANDARD_RIGHTS_REQUIRED_ACCESS| SYNCHRONIZE_ACCESS|FILE_ALL_ACCESS)
1063 #define FILE_GENERIC_READ (STANDARD_RIGHTS_READ_ACCESS|FILE_READ_DATA|FILE_READ_ATTRIBUTES|\
1064 FILE_READ_EA|SYNCHRONIZE_ACCESS)
1066 #define FILE_GENERIC_WRITE (STANDARD_RIGHTS_WRITE_ACCESS|FILE_WRITE_DATA|FILE_WRITE_ATTRIBUTES|\
1067 FILE_WRITE_EA|FILE_APPEND_DATA|SYNCHRONIZE_ACCESS)
1069 #define FILE_GENERIC_EXECUTE (STANDARD_RIGHTS_EXECUTE_ACCESS|FILE_READ_ATTRIBUTES|\
1070 FILE_EXECUTE|SYNCHRONIZE_ACCESS)
1072 /* Mapping of access rights to UNIX perms. */
1073 #define UNIX_ACCESS_RWX FILE_GENERIC_ALL
1074 #define UNIX_ACCESS_R FILE_GENERIC_READ
1075 #define UNIX_ACCESS_W FILE_GENERIC_WRITE
1076 #define UNIX_ACCESS_X FILE_GENERIC_EXECUTE
1080 * This is the old mapping we used to use. To get W2KSP2 profiles
1081 * working we need to map to the canonical file perms.
1083 #define UNIX_ACCESS_RWX (UNIX_ACCESS_R|UNIX_ACCESS_W|UNIX_ACCESS_X)
1084 #define UNIX_ACCESS_R (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1085 FILE_READ_ATTRIBUTES|FILE_READ_EA|FILE_READ_DATA)
1086 #define UNIX_ACCESS_W (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1087 FILE_WRITE_ATTRIBUTES|FILE_WRITE_EA|\
1088 FILE_APPEND_DATA|FILE_WRITE_DATA)
1089 #define UNIX_ACCESS_X (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1090 FILE_EXECUTE|FILE_READ_ATTRIBUTES)
1093 #define UNIX_ACCESS_NONE (WRITE_OWNER_ACCESS)
1096 #define REQUEST_OPLOCK 2
1097 #define REQUEST_BATCH_OPLOCK 4
1098 #define OPEN_DIRECTORY 8
1100 /* ShareAccess field. */
1101 #define FILE_SHARE_NONE 0 /* Cannot be used in bitmask. */
1102 #define FILE_SHARE_READ 1
1103 #define FILE_SHARE_WRITE 2
1104 #define FILE_SHARE_DELETE 4
1106 /* FileAttributesField */
1107 #define FILE_ATTRIBUTE_READONLY aRONLY
1108 #define FILE_ATTRIBUTE_HIDDEN aHIDDEN
1109 #define FILE_ATTRIBUTE_SYSTEM aSYSTEM
1110 #define FILE_ATTRIBUTE_DIRECTORY aDIR
1111 #define FILE_ATTRIBUTE_ARCHIVE aARCH
1112 #define FILE_ATTRIBUTE_NORMAL 0x80L
1113 #define FILE_ATTRIBUTE_TEMPORARY 0x100L
1114 #define FILE_ATTRIBUTE_SPARSE 0x200L
1115 #define FILE_ATTRIBUTE_COMPRESSED 0x800L
1116 #define FILE_ATTRIBUTE_NONINDEXED 0x2000L
1117 #define SAMBA_ATTRIBUTES_MASK 0x7F
1119 /* Flags - combined with attributes. */
1120 #define FILE_FLAG_WRITE_THROUGH 0x80000000L
1121 #define FILE_FLAG_NO_BUFFERING 0x20000000L
1122 #define FILE_FLAG_RANDOM_ACCESS 0x10000000L
1123 #define FILE_FLAG_SEQUENTIAL_SCAN 0x08000000L
1124 #define FILE_FLAG_DELETE_ON_CLOSE 0x04000000L
1125 #define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L
1126 #define FILE_FLAG_POSIX_SEMANTICS 0x01000000L
1128 /* CreateDisposition field. */
1129 #define FILE_SUPERSEDE 0
1131 #define FILE_CREATE 2
1132 #define FILE_OPEN_IF 3
1133 #define FILE_OVERWRITE 4
1134 #define FILE_OVERWRITE_IF 5
1136 /* CreateOptions field. */
1137 #define FILE_DIRECTORY_FILE 0x0001
1138 #define FILE_WRITE_THROUGH 0x0002
1139 #define FILE_SEQUENTIAL_ONLY 0x0004
1140 #define FILE_NON_DIRECTORY_FILE 0x0040
1141 #define FILE_NO_EA_KNOWLEDGE 0x0200
1142 #define FILE_EIGHT_DOT_THREE_ONLY 0x0400
1143 #define FILE_RANDOM_ACCESS 0x0800
1144 #define FILE_DELETE_ON_CLOSE 0x1000
1146 /* Responses when opening a file. */
1147 #define FILE_WAS_OPENED 1
1148 #define FILE_WAS_CREATED 2
1149 #define FILE_WAS_OVERWRITTEN 3
1151 /* File type flags */
1152 #define FILE_TYPE_DISK 0
1153 #define FILE_TYPE_BYTE_MODE_PIPE 1
1154 #define FILE_TYPE_MESSAGE_MODE_PIPE 2
1155 #define FILE_TYPE_PRINTER 3
1156 #define FILE_TYPE_COMM_DEVICE 4
1157 #define FILE_TYPE_UNKNOWN 0xFFFF
1159 /* Flag for NT transact rename call. */
1160 #define RENAME_REPLACE_IF_EXISTS 1
1162 /* Filesystem Attributes. */
1163 #define FILE_CASE_SENSITIVE_SEARCH 0x01
1164 #define FILE_CASE_PRESERVED_NAMES 0x02
1165 #define FILE_UNICODE_ON_DISK 0x04
1166 /* According to cifs9f, this is 4, not 8 */
1167 /* Acconding to testing, this actually sets the security attribute! */
1168 #define FILE_PERSISTENT_ACLS 0x08
1169 /* These entries added from cifs9f --tsb */
1170 #define FILE_FILE_COMPRESSION 0x10
1171 #define FILE_VOLUME_QUOTAS 0x20
1172 /* I think this is wrong. JRA #define FILE_DEVICE_IS_MOUNTED 0x20 */
1173 #define FILE_VOLUME_SPARSE_FILE 0x40
1174 #define FILE_VOLUME_IS_COMPRESSED 0x8000
1176 /* ChangeNotify flags. */
1177 #define FILE_NOTIFY_CHANGE_FILE 0x001
1178 #define FILE_NOTIFY_CHANGE_DIR_NAME 0x002
1179 #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x004
1180 #define FILE_NOTIFY_CHANGE_SIZE 0x008
1181 #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x010
1182 #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x020
1183 #define FILE_NOTIFY_CHANGE_CREATION 0x040
1184 #define FILE_NOTIFY_CHANGE_EA 0x080
1185 #define FILE_NOTIFY_CHANGE_SECURITY 0x100
1186 #define FILE_NOTIFY_CHANGE_FILE_NAME 0x200
1188 /* where to find the base of the SMB packet proper */
1189 #define smb_base(buf) (((char *)(buf))+4)
1191 /* we don't allow server strings to be longer than 48 characters as
1192 otherwise NT will not honour the announce packets */
1193 #define MAX_SERVER_STRING_LENGTH 48
1196 #define SMB_SUCCESS 0 /* The request was successful. */
1199 void dfs_unlogin(void);
1200 extern int dcelogin_atmost_once;
1204 char *strdup(char *s);
1208 #define SIGNAL_CAST (RETSIGTYPE (*)(int))
1215 /* these are used in NetServerEnum to choose what to receive */
1216 #define SV_TYPE_WORKSTATION 0x00000001
1217 #define SV_TYPE_SERVER 0x00000002
1218 #define SV_TYPE_SQLSERVER 0x00000004
1219 #define SV_TYPE_DOMAIN_CTRL 0x00000008
1220 #define SV_TYPE_DOMAIN_BAKCTRL 0x00000010
1221 #define SV_TYPE_TIME_SOURCE 0x00000020
1222 #define SV_TYPE_AFP 0x00000040
1223 #define SV_TYPE_NOVELL 0x00000080
1224 #define SV_TYPE_DOMAIN_MEMBER 0x00000100
1225 #define SV_TYPE_PRINTQ_SERVER 0x00000200
1226 #define SV_TYPE_DIALIN_SERVER 0x00000400
1227 #define SV_TYPE_SERVER_UNIX 0x00000800
1228 #define SV_TYPE_NT 0x00001000
1229 #define SV_TYPE_WFW 0x00002000
1230 #define SV_TYPE_SERVER_MFPN 0x00004000
1231 #define SV_TYPE_SERVER_NT 0x00008000
1232 #define SV_TYPE_POTENTIAL_BROWSER 0x00010000
1233 #define SV_TYPE_BACKUP_BROWSER 0x00020000
1234 #define SV_TYPE_MASTER_BROWSER 0x00040000
1235 #define SV_TYPE_DOMAIN_MASTER 0x00080000
1236 #define SV_TYPE_SERVER_OSF 0x00100000
1237 #define SV_TYPE_SERVER_VMS 0x00200000
1238 #define SV_TYPE_WIN95_PLUS 0x00400000
1239 #define SV_TYPE_DFS_SERVER 0x00800000
1240 #define SV_TYPE_ALTERNATE_XPORT 0x20000000
1241 #define SV_TYPE_LOCAL_LIST_ONLY 0x40000000
1242 #define SV_TYPE_DOMAIN_ENUM 0x80000000
1243 #define SV_TYPE_ALL 0xFFFFFFFF
1245 /* This was set by JHT in liaison with Jeremy Allison early 1997
1247 * Version 4.0 - never made public
1248 * Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9
1249 * - Reappeared in 1.9.16p11 with fixed smbd services
1250 * Version 4.20 - To indicate that nmbd and browsing now works better
1251 * Version 4.50 - Set at release of samba-2.2.0 by JHT
1253 * Note: In the presence of NT4.X do not set above 4.9
1254 * Setting this above 4.9 can have undesired side-effects.
1255 * This may change again in Samba-3.0 after further testing. JHT
1258 #define DEFAULT_MAJOR_VERSION 0x04
1259 #define DEFAULT_MINOR_VERSION 0x05
1261 /* Browser Election Values */
1262 #define BROWSER_ELECTION_VERSION 0x010f
1263 #define BROWSER_CONSTANT 0xaa55
1265 /* NT Flags2 bits - cifs6.txt section 3.1.2 */
1267 #define FLAGS2_LONG_PATH_COMPONENTS 0x0001
1268 #define FLAGS2_EXTENDED_ATTRIBUTES 0x0002
1269 #define FLAGS2_EXTENDED_SECURITY 0x0800
1270 #define FLAGS2_DFS_PATHNAMES 0x1000
1271 #define FLAGS2_READ_PERMIT_NO_EXECUTE 0x2000
1272 #define FLAGS2_32_BIT_ERROR_CODES 0x4000
1273 #define FLAGS2_UNICODE_STRINGS 0x8000
1275 #define FLAGS2_WIN2K_SIGNATURE 0xC852 /* Hack alert ! For now... JRA. */
1277 /* Capabilities. see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */
1279 #define CAP_RAW_MODE 0x0001
1280 #define CAP_MPX_MODE 0x0002
1281 #define CAP_UNICODE 0x0004
1282 #define CAP_LARGE_FILES 0x0008
1283 #define CAP_NT_SMBS 0x0010
1284 #define CAP_RPC_REMOTE_APIS 0x0020
1285 #define CAP_STATUS32 0x0040
1286 #define CAP_LEVEL_II_OPLOCKS 0x0080
1287 #define CAP_LOCK_AND_READ 0x0100
1288 #define CAP_NT_FIND 0x0200
1289 #define CAP_DFS 0x1000
1290 #define CAP_W2K_SMBS 0x2000
1291 #define CAP_LARGE_READX 0x4000
1292 #define CAP_LARGE_WRITEX 0x8000
1293 #define CAP_EXTENDED_SECURITY 0x80000000
1295 /* protocol types. It assumes that higher protocols include lower protocols
1297 enum protocol_types {PROTOCOL_NONE,PROTOCOL_CORE,PROTOCOL_COREPLUS,PROTOCOL_LANMAN1,PROTOCOL_LANMAN2,PROTOCOL_NT1};
1299 /* security levels */
1300 enum security_types {SEC_SHARE,SEC_USER,SEC_SERVER,SEC_DOMAIN,SEC_ADS};
1311 /* printing types */
1312 enum printing_types {PRINT_BSD,PRINT_SYSV,PRINT_AIX,PRINT_HPUX,
1313 PRINT_QNX,PRINT_PLP,PRINT_LPRNG,PRINT_SOFTQ,
1314 PRINT_CUPS,PRINT_LPRNT,PRINT_LPROS2
1316 ,PRINT_TEST,PRINT_VLP
1317 #endif /* DEVELOPER */
1320 /* LDAP schema types */
1321 enum schema_types {SCHEMA_COMPAT, SCHEMA_AD, SCHEMA_SAMBA};
1323 /* LDAP SSL options */
1324 enum ldap_ssl_types {LDAP_SSL_ON, LDAP_SSL_OFF, LDAP_SSL_START_TLS};
1326 /* Remote architectures we know about. */
1327 enum remote_arch_types {RA_UNKNOWN, RA_WFWG, RA_OS2, RA_WIN95, RA_WINNT, RA_WIN2K, RA_SAMBA};
1330 enum case_handling {CASE_LOWER,CASE_UPPER};
1333 /* SSL version options */
1334 enum ssl_version_enum {SMB_SSL_V2,SMB_SSL_V3,SMB_SSL_V23,SMB_SSL_TLS1};
1335 #endif /* WITH_SSL */
1338 * Global value meaing that the smb_uid field should be
1339 * ingored (in share level security and protocol level == CORE)
1342 #define UID_FIELD_INVALID 0
1343 #define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */
1345 /* Defines needed for multi-codepage support. */
1346 #define MSDOS_LATIN_1_CODEPAGE 850
1347 #define KANJI_CODEPAGE 932
1348 #define HANGUL_CODEPAGE 949
1349 #define BIG5_CODEPAGE 950
1350 #define SIMPLIFIED_CHINESE_CODEPAGE 936
1354 * Default client code page - Japanese
1356 #define DEFAULT_CLIENT_CODE_PAGE KANJI_CODEPAGE
1359 * Default client code page - 850 - Western European
1361 #define DEFAULT_CLIENT_CODE_PAGE MSDOS_LATIN_1_CODEPAGE
1364 /* Global val set if multibyte codepage. */
1365 extern int global_is_multibyte_codepage;
1367 #define get_character_len(x) (global_is_multibyte_codepage ? skip_multibyte_char((x)) : 0)
1370 * Size of buffer to use when moving files across filesystems.
1372 #define COPYBUF_SIZE (8*1024)
1375 * Integers used to override error codes.
1377 extern int unix_ERR_class;
1378 extern int unix_ERR_code;
1381 * Used in chaining code.
1383 extern int chain_size;
1386 * Map the Core and Extended Oplock requesst bits down
1387 * to common bits (EXCLUSIVE_OPLOCK & BATCH_OPLOCK).
1393 #define CORE_OPLOCK_REQUEST(inbuf) \
1394 ((CVAL(inbuf,smb_flg)&(FLAG_REQUEST_OPLOCK|FLAG_REQUEST_BATCH_OPLOCK))>>5)
1397 * Extended protocol.
1399 #define EXTENDED_OPLOCK_REQUEST(inbuf) ((SVAL(inbuf,smb_vwv2)&((1<<1)|(1<<2)))>>1)
1402 #define LOCKING_ANDX_SHARED_LOCK 0x1
1403 #define LOCKING_ANDX_OPLOCK_RELEASE 0x2
1404 #define LOCKING_ANDX_CHANGE_LOCKTYPE 0x4
1405 #define LOCKING_ANDX_CANCEL_LOCK 0x8
1406 #define LOCKING_ANDX_LARGE_FILES 0x10
1409 #define OPLOCKLEVEL_NONE 0
1410 #define OPLOCKLEVEL_II 1
1413 * Bits we test with.
1417 #define EXCLUSIVE_OPLOCK 1
1418 #define BATCH_OPLOCK 2
1419 #define LEVEL_II_OPLOCK 4
1421 #define EXCLUSIVE_OPLOCK_TYPE(lck) ((lck) & (EXCLUSIVE_OPLOCK|BATCH_OPLOCK))
1422 #define BATCH_OPLOCK_TYPE(lck) ((lck) & BATCH_OPLOCK)
1423 #define LEVEL_II_OPLOCK_TYPE(lck) ((lck) & LEVEL_II_OPLOCK)
1425 #define CORE_OPLOCK_GRANTED (1<<5)
1426 #define EXTENDED_OPLOCK_GRANTED (1<<15)
1429 * Return values for oplock types.
1432 #define NO_OPLOCK_RETURN 0
1433 #define EXCLUSIVE_OPLOCK_RETURN 1
1434 #define BATCH_OPLOCK_RETURN 2
1435 #define LEVEL_II_OPLOCK_RETURN 3
1438 * Loopback command offsets.
1441 #define OPBRK_CMD_LEN_OFFSET 0
1442 #define OPBRK_CMD_PORT_OFFSET 4
1443 #define OPBRK_CMD_HEADER_LEN 6
1445 #define OPBRK_MESSAGE_CMD_OFFSET 0
1448 * Oplock break command code to send over the udp socket.
1449 * The same message is sent for both exlusive and level II breaks.
1451 * The form of this is :
1453 * 0 2 2+pid 2+pid+dev 2+pid+dev+ino
1454 * +----+--------+-------+--------+---------+
1455 * | cmd| pid | dev | inode | fileid |
1456 * +----+--------+-------+--------+---------+
1459 #define OPLOCK_BREAK_CMD 0x1
1460 #define OPLOCK_BREAK_PID_OFFSET 2
1461 #define OPLOCK_BREAK_DEV_OFFSET (OPLOCK_BREAK_PID_OFFSET + sizeof(pid_t))
1462 #define OPLOCK_BREAK_INODE_OFFSET (OPLOCK_BREAK_DEV_OFFSET + sizeof(SMB_DEV_T))
1463 #define OPLOCK_BREAK_FILEID_OFFSET (OPLOCK_BREAK_INODE_OFFSET + sizeof(SMB_INO_T))
1464 #define OPLOCK_BREAK_MSG_LEN (OPLOCK_BREAK_FILEID_OFFSET + sizeof(unsigned long))
1466 #define KERNEL_OPLOCK_BREAK_CMD 0x2
1467 #define LEVEL_II_OPLOCK_BREAK_CMD 0x3
1470 * Capabilities abstracted for different systems.
1473 #define KERNEL_OPLOCK_CAPABILITY 0x1
1476 * Oplock break command code sent via the kernel interface (if it exists).
1480 * 0 2 2+devsize 2+devsize+inodesize
1481 * +----+--------+--------+----------+
1482 * | cmd| dev | inode | fileid |
1483 * +----+--------+--------+----------+
1485 #define KERNEL_OPLOCK_BREAK_DEV_OFFSET 2
1486 #define KERNEL_OPLOCK_BREAK_INODE_OFFSET (KERNEL_OPLOCK_BREAK_DEV_OFFSET + sizeof(SMB_DEV_T))
1487 #define KERNEL_OPLOCK_BREAK_FILEID_OFFSET (KERNEL_OPLOCK_BREAK_INODE_OFFSET + sizeof(SMB_INO_T))
1488 #define KERNEL_OPLOCK_BREAK_MSG_LEN (KERNEL_OPLOCK_BREAK_FILEID_OFFSET + sizeof(unsigned long))
1491 /* if a kernel does support oplocks then a structure of the following
1492 typee is used to describe how to interact with the kernel */
1493 struct kernel_oplocks {
1494 BOOL (*receive_message)(fd_set *fds, char *buffer, int buffer_len);
1495 BOOL (*set_oplock)(files_struct *fsp, int oplock_type);
1496 void (*release_oplock)(files_struct *fsp);
1497 BOOL (*parse_message)(char *msg_start, int msg_len, SMB_INO_T *inode, SMB_DEV_T *dev, unsigned long *file_id);
1498 BOOL (*msg_waiting)(fd_set *fds);
1499 int notification_fd;
1503 #define CMD_REPLY 0x8000
1505 /* this structure defines the functions for doing change notify in
1506 various implementations */
1507 struct cnotify_fns {
1508 void * (*register_notify)(connection_struct *conn, char *path, uint32 flags);
1509 BOOL (*check_notify)(connection_struct *conn, uint16 vuid, char *path, uint32 flags, void *data, time_t t);
1510 void (*remove_notify)(void *data);
1516 #include "smb_macros.h"
1518 /* A netbios name structure. */
1522 unsigned int name_type;
1526 /* A netbios node status array element. */
1527 struct node_status {
1530 unsigned char flags;
1535 #define AGENT_CMD_CON 0
1536 #define AGENT_CMD_CON_ANON 2
1537 #define AGENT_CMD_CON_REUSE 1
1547 uchar smb_lm_pwd[16];
1548 uchar smb_nt_pwd[16];
1550 uchar smb_lm_owf[24];
1551 uchar smb_nt_owf[128];
1554 uchar lm_cli_chal[8];
1555 uchar nt_cli_chal[128];
1556 size_t nt_cli_chal_len;
1562 * Network Computing Architechture Context Name Named Pipe
1563 * See MSDN docs for more information
1568 struct cli_state *smb;
1573 #include "rpc_creds.h"
1574 #include "rpc_misc.h"
1575 #include "rpc_secdes.h"
1576 #include "nt_printing.h"
1578 typedef struct user_struct
1580 struct user_struct *next, *prev;
1581 uint16 vuid; /* Tag for this entry. */
1582 uid_t uid; /* uid of a validated user */
1583 gid_t gid; /* gid of a validated user */
1585 userdom_struct user;
1588 /* following groups stuff added by ih */
1589 /* This groups info is needed for when we become_user() for this uid */
1593 NT_USER_TOKEN *nt_user_token;
1595 int session_id; /* used by utmp and pam session code */
1598 /* used to hold an arbitrary blob of data */
1605 #include "ntdomain.h"
1610 * Size of new password account encoding string. This is enough space to
1611 * hold 11 ACB characters, plus the surrounding [] and a terminating null.
1612 * Do not change unless you are adding new ACB bits!
1615 #define NEW_PW_FORMAT_SPACE_PADDED_LEN 14
1618 Do you want session setups at user level security with a invalid
1619 password to be rejected or allowed in as guest? WinNT rejects them
1620 but it can be a pain as it means "net view" needs to use a password
1622 You have 3 choices in the setting of map_to_guest:
1624 "NEVER_MAP_TO_GUEST" means session setups with an invalid password
1625 are rejected. This is the default.
1627 "MAP_TO_GUEST_ON_BAD_USER" means session setups with an invalid password
1628 are rejected, unless the username does not exist, in which case it
1629 is treated as a guest login
1631 "MAP_TO_GUEST_ON_BAD_PASSWORD" means session setups with an invalid password
1632 are treated as a guest login
1634 Note that map_to_guest only has an effect in user or server
1638 #define NEVER_MAP_TO_GUEST 0
1639 #define MAP_TO_GUEST_ON_BAD_USER 1
1640 #define MAP_TO_GUEST_ON_BAD_PASSWORD 2
1642 #define SAFE_NETBIOS_CHARS ". -_"
1644 #include "nsswitch/winbindd_nss.h"
1645 #include "smb_acls.h"
1647 /* generic iconv conversion structure */
1649 size_t (*direct)(void *cd, char **inbuf, size_t *inbytesleft,
1650 char **outbuf, size_t *outbytesleft);
1651 size_t (*pull)(void *cd, char **inbuf, size_t *inbytesleft,
1652 char **outbuf, size_t *outbytesleft);
1653 size_t (*push)(void *cd, char **inbuf, size_t *inbytesleft,
1654 char **outbuf, size_t *outbytesleft);
1655 void *cd_direct, *cd_pull, *cd_push;
1658 /* The maximum length of a trust account password.
1659 Used when we randomly create it, 15 char passwords
1660 exceed NT4's max password length */
1662 #define DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH 14