2 Unix SMB/Netbios implementation.
4 SMB parameters and setup
5 Copyright (C) Andrew Tridgell 1992-1997
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 #ifndef MAX_CONNECTIONS
25 #define MAX_CONNECTIONS 127
28 #ifndef MAX_OPEN_FILES
29 #define MAX_OPEN_FILES 50
33 #define GUEST_ACCOUNT "nobody"
36 #define BUFFER_SIZE (0xFFFF)
37 #define SAFETY_MARGIN 1024
39 /* size of shared memory used for share mode locking */
41 #define SHMEM_SIZE 102400
45 #define DGRAM_PORT 138
50 #define BOOLSTR(b) ((b) ? "Yes" : "No")
51 #define BITSETB(ptr,bit) ((((char *)ptr)[0] & (1<<(bit)))!=0)
52 #define BITSETW(ptr,bit) ((SVAL(ptr,0) & (1<<(bit)))!=0)
53 #define PTR_DIFF(p1,p2) ((ptrdiff_t)(((char *)(p1)) - (char *)(p2)))
57 /* offset in shared memory */
58 typedef int smb_shm_offset_t;
59 #define NULL_OFFSET (smb_shm_offset_t)(0)
63 Samba needs type definitions for int16, int32, uint16 and uint32.
65 Normally these are signed and unsigned 16 and 32 bit integers, but
66 they actually only need to be at least 16 and 32 bits
67 respectively. Thus if your word size is 8 bytes just defining them
68 as signed and unsigned int will work.
71 /* afs/stds.h defines int16 and int32 */
78 typedef unsigned short uint16;
82 typedef unsigned int uint32;
86 #define uchar unsigned char
92 #define uint16 unsigned short
95 #define uint32 unsigned int
100 #ifndef DEF_CREATE_MASK
101 #define DEF_CREATE_MASK (0755)
104 /* how long to wait for secondary SMB packets (milli-seconds) */
105 #define SMB_SECONDARY_WAIT (60*1000)
109 #define DEBUG(level,body) ((DEBUGLEVEL>=(level))?(Debug1 body):0)
111 extern int syslog_level;
113 #define DEBUG(level,body) ((DEBUGLEVEL>=(level))? (syslog_level = (level), Debug1 body):0)
116 /* this defines the error codes that receive_smb can put in smb_read_error */
117 #define READ_TIMEOUT 1
122 #define DIR_STRUCT_SIZE 43
124 /* these define all the command types recognised by the server - there
125 are lots of gaps so probably there are some rare commands that are not
128 #define pSETDIR '\377'
130 /* these define the attribute byte as seen by DOS */
131 #define aRONLY (1L<<0)
132 #define aHIDDEN (1L<<1)
133 #define aSYSTEM (1L<<2)
134 #define aVOLID (1L<<3)
136 #define aARCH (1L<<5)
147 #define STYPE_DISKTREE 0 /* Disk drive */
148 #define STYPE_PRINTQ 1 /* Spooler queue */
149 #define STYPE_DEVICE 2 /* Serial device */
150 #define STYPE_IPC 3 /* Interprocess communication (IPC) */
152 /* SMB X/Open error codes for the ERRdos error class */
153 #define ERRbadfunc 1 /* Invalid function (or system call) */
154 #define ERRbadfile 2 /* File not found (pathname error) */
155 #define ERRbadpath 3 /* Directory not found */
156 #define ERRnofids 4 /* Too many open files */
157 #define ERRnoaccess 5 /* Access denied */
158 #define ERRbadfid 6 /* Invalid fid */
159 #define ERRnomem 8 /* Out of memory */
160 #define ERRbadmem 9 /* Invalid memory block address */
161 #define ERRbadenv 10 /* Invalid environment */
162 #define ERRbadaccess 12 /* Invalid open mode */
163 #define ERRbaddata 13 /* Invalid data (only from ioctl call) */
164 #define ERRres 14 /* reserved */
165 #define ERRbaddrive 15 /* Invalid drive */
166 #define ERRremcd 16 /* Attempt to delete current directory */
167 #define ERRdiffdevice 17 /* rename/move across different filesystems */
168 #define ERRnofiles 18 /* no more files found in file search */
169 #define ERRbadshare 32 /* Share mode on file conflict with open mode */
170 #define ERRlock 33 /* Lock request conflicts with existing lock */
171 #define ERRfilexists 80 /* File in operation already exists */
172 #define ERRbadpipe 230 /* Named pipe invalid */
173 #define ERRpipebusy 231 /* All instances of pipe are busy */
174 #define ERRpipeclosing 232 /* named pipe close in progress */
175 #define ERRnotconnected 233 /* No process on other end of named pipe */
176 #define ERRmoredata 234 /* More data to be returned */
177 #define ERROR_EAS_DIDNT_FIT 275 /* Extended attributes didn't fit */
178 #define ERROR_EAS_NOT_SUPPORTED 282 /* Extended attributes not suppored */
179 #define ERRunknownlevel 124
180 #define ERRunknownipc 2142
183 /* here's a special one from observing NT */
184 #define ERRnoipc 66 /* don't support ipc */
186 /* Error codes for the ERRSRV class */
188 #define ERRerror 1 /* Non specific error code */
189 #define ERRbadpw 2 /* Bad password */
190 #define ERRbadtype 3 /* reserved */
191 #define ERRaccess 4 /* No permissions to do the requested operation */
192 #define ERRinvnid 5 /* tid invalid */
193 #define ERRinvnetname 6 /* Invalid servername */
194 #define ERRinvdevice 7 /* Invalid device */
195 #define ERRqfull 49 /* Print queue full */
196 #define ERRqtoobig 50 /* Queued item too big */
197 #define ERRinvpfid 52 /* Invalid print file in smb_fid */
198 #define ERRsmbcmd 64 /* Unrecognised command */
199 #define ERRsrverror 65 /* smb server internal error */
200 #define ERRfilespecs 67 /* fid and pathname invalid combination */
201 #define ERRbadlink 68 /* reserved */
202 #define ERRbadpermits 69 /* Access specified for a file is not valid */
203 #define ERRbadpid 70 /* reserved */
204 #define ERRsetattrmode 71 /* attribute mode invalid */
205 #define ERRpaused 81 /* Message server paused */
206 #define ERRmsgoff 82 /* Not receiving messages */
207 #define ERRnoroom 83 /* No room for message */
208 #define ERRrmuns 87 /* too many remote usernames */
209 #define ERRtimeout 88 /* operation timed out */
210 #define ERRnoresource 89 /* No resources currently available for request. */
211 #define ERRtoomanyuids 90 /* too many userids */
212 #define ERRbaduid 91 /* bad userid */
213 #define ERRuseMPX 250 /* temporarily unable to use raw mode, use MPX mode */
214 #define ERRuseSTD 251 /* temporarily unable to use raw mode, use standard mode */
215 #define ERRcontMPX 252 /* resume MPX mode */
216 #define ERRbadPW /* reserved */
217 #define ERRnosupport 0xFFFF
218 #define ERRunknownsmb 22 /* from NT 3.5 response */
221 /* Error codes for the ERRHRD class */
223 #define ERRnowrite 19 /* read only media */
224 #define ERRbadunit 20 /* Unknown device */
225 #define ERRnotready 21 /* Drive not ready */
226 #define ERRbadcmd 22 /* Unknown command */
227 #define ERRdata 23 /* Data (CRC) error */
228 #define ERRbadreq 24 /* Bad request structure length */
230 #define ERRbadmedia 26
231 #define ERRbadsector 27
232 #define ERRnopaper 28
233 #define ERRwrite 29 /* write fault */
234 #define ERRread 30 /* read fault */
235 #define ERRgeneral 31 /* General hardware failure */
236 #define ERRwrongdisk 34
237 #define ERRFCBunavail 35
238 #define ERRsharebufexc 36 /* share buffer exceeded */
239 #define ERRdiskfull 39
242 typedef char pstring[1024];
243 typedef char fstring[128];
244 typedef fstring string;
250 unsigned char *smb_passwd; /* Null if no password */
251 unsigned char *smb_nt_passwd; /* Null if no password */
252 /* Other fields / flags may be added later */
256 struct current_user {
270 /* these times are normally kept in GMT */
278 /* Structure used when SMBwritebmpx is active */
281 int wr_total_written; /* So we know when to discard this */
284 int32 wr_error; /* Cached errors */
285 BOOL wr_mode; /* write through mode) */
286 BOOL wr_discard; /* discard all further data */
290 * Structure used to indirect fd's from the files_struct.
291 * Needed as POSIX locking is based on file and process, not
292 * file descriptor and process.
309 file_fd_struct *fd_ptr;
316 write_bmpx_struct *wbmpx_ptr;
317 struct timeval open_time;
332 int list[UID_CACHE_SIZE];
339 struct uid_cache uid_cache;
349 char *user; /* name of user who *opened* this connection */
350 int uid; /* uid of user who *opened* this connection */
351 int gid; /* gid of user who *opened* this connection */
352 uint16 vuid; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */
353 /* following groups stuff added by ih */
354 /* This groups info is valid for the user that *opened* the connection */
357 int *igroups; /* an integer version - some OSes are broken :-( */
366 int uid; /* uid of a validated user */
367 int gid; /* gid of a validated user */
368 fstring name; /* name of a validated user */
370 /* following groups stuff added by ih */
371 /* This groups info is needed for when we become_user() for this uid */
374 int *user_igroups; /* an integer version - some OSes are broken :-( */
375 #if (defined(NETGROUP) && defined(AUTOMOUNT))
376 char *home_share; /* to store NIS home of a user - simeon */
378 char *real_name; /* to store real name from password file - simeon */
382 enum {LPQ_QUEUED,LPQ_PAUSED,LPQ_SPOOLING,LPQ_PRINTING};
393 } print_queue_struct;
395 enum {LPSTAT_OK, LPSTAT_STOPPED, LPSTAT_ERROR};
401 } print_status_struct;
403 /* used for server information: client, nameserv and ipc */
404 struct server_info_struct
409 fstring domain; /* used ONLY in ipc.c NOT namework.c */
410 BOOL server_added; /* used ONLY in ipc.c NOT namework.c */
414 /* used for network interfaces */
417 struct interface *next;
419 struct in_addr bcast;
420 struct in_addr nmask;
423 /* share mode record in shared memory */
426 smb_shm_offset_t next_offset; /* offset of next record in list in shared mem */
433 char file_name[1]; /* dynamically allocated with correct size */
437 /* this is used for smbstatus */
438 struct connect_record
452 #define LOCKING_VERSION 3
454 /* these are useful macros for checking validity of handles */
455 #define VALID_FNUM(fnum) (((fnum) >= 0) && ((fnum) < MAX_OPEN_FILES))
456 #define OPEN_FNUM(fnum) (VALID_FNUM(fnum) && Files[fnum].open)
457 #define VALID_CNUM(cnum) (((cnum) >= 0) && ((cnum) < MAX_CONNECTIONS))
458 #define OPEN_CNUM(cnum) (VALID_CNUM(cnum) && Connections[cnum].open)
459 #define IS_IPC(cnum) (VALID_CNUM(cnum) && Connections[cnum].ipc)
460 #define FNUM_OK(fnum,c) (OPEN_FNUM(fnum) && (c)==Files[fnum].cnum)
462 #define CHECK_FNUM(fnum,c) if (!FNUM_OK(fnum,c)) \
463 return(ERROR(ERRDOS,ERRbadfid))
464 #define CHECK_READ(fnum) if (!Files[fnum].can_read) \
465 return(ERROR(ERRDOS,ERRbadaccess))
466 #define CHECK_WRITE(fnum) if (!Files[fnum].can_write) \
467 return(ERROR(ERRDOS,ERRbadaccess))
468 #define CHECK_ERROR(fnum) if (HAS_CACHED_ERROR(fnum)) \
469 return(CACHED_ERROR(fnum))
471 /* translates a connection number into a service number */
472 #define SNUM(cnum) (Connections[cnum].service)
474 /* access various service details */
475 #define SERVICE(snum) (lp_servicename(snum))
476 #define PRINTCAP (lp_printcapname())
477 #define PRINTCOMMAND(snum) (lp_printcommand(snum))
478 #define PRINTERNAME(snum) (lp_printername(snum))
479 #define CAN_WRITE(cnum) (OPEN_CNUM(cnum) && !Connections[cnum].read_only)
480 #define VALID_SNUM(snum) (lp_snum_ok(snum))
481 #define GUEST_OK(snum) (VALID_SNUM(snum) && lp_guest_ok(snum))
482 #define GUEST_ONLY(snum) (VALID_SNUM(snum) && lp_guest_only(snum))
483 #define CAN_SETDIR(snum) (!lp_no_set_dir(snum))
484 #define CAN_PRINT(cnum) (OPEN_CNUM(cnum) && lp_print_ok(SNUM(cnum)))
485 #define POSTSCRIPT(cnum) (OPEN_CNUM(cnum) && lp_postscript(SNUM(cnum)))
486 #define MAP_HIDDEN(cnum) (OPEN_CNUM(cnum) && lp_map_hidden(SNUM(cnum)))
487 #define MAP_SYSTEM(cnum) (OPEN_CNUM(cnum) && lp_map_system(SNUM(cnum)))
488 #define MAP_ARCHIVE(cnum) (OPEN_CNUM(cnum) && lp_map_archive(SNUM(cnum)))
489 #define CREATE_MODE(cnum) (lp_create_mode(SNUM(cnum)) | 0700)
491 #define SMBENCRYPT() (lp_encrypted_passwords())
493 #define SMBENCRYPT() (False)
496 /* the basic packet size, assuming no words or bytes */
499 /* offsets into message for common items */
534 #define SMBmkdir 0x00 /* create directory */
535 #define SMBrmdir 0x01 /* delete directory */
536 #define SMBopen 0x02 /* open file */
537 #define SMBcreate 0x03 /* create file */
538 #define SMBclose 0x04 /* close file */
539 #define SMBflush 0x05 /* flush file */
540 #define SMBunlink 0x06 /* delete file */
541 #define SMBmv 0x07 /* rename file */
542 #define SMBgetatr 0x08 /* get file attributes */
543 #define SMBsetatr 0x09 /* set file attributes */
544 #define SMBread 0x0A /* read from file */
545 #define SMBwrite 0x0B /* write to file */
546 #define SMBlock 0x0C /* lock byte range */
547 #define SMBunlock 0x0D /* unlock byte range */
548 #define SMBctemp 0x0E /* create temporary file */
549 #define SMBmknew 0x0F /* make new file */
550 #define SMBchkpth 0x10 /* check directory path */
551 #define SMBexit 0x11 /* process exit */
552 #define SMBlseek 0x12 /* seek */
553 #define SMBtcon 0x70 /* tree connect */
554 #define SMBtconX 0x75 /* tree connect and X*/
555 #define SMBtdis 0x71 /* tree disconnect */
556 #define SMBnegprot 0x72 /* negotiate protocol */
557 #define SMBdskattr 0x80 /* get disk attributes */
558 #define SMBsearch 0x81 /* search directory */
559 #define SMBsplopen 0xC0 /* open print spool file */
560 #define SMBsplwr 0xC1 /* write to print spool file */
561 #define SMBsplclose 0xC2 /* close print spool file */
562 #define SMBsplretq 0xC3 /* return print queue */
563 #define SMBsends 0xD0 /* send single block message */
564 #define SMBsendb 0xD1 /* send broadcast message */
565 #define SMBfwdname 0xD2 /* forward user name */
566 #define SMBcancelf 0xD3 /* cancel forward */
567 #define SMBgetmac 0xD4 /* get machine name */
568 #define SMBsendstrt 0xD5 /* send start of multi-block message */
569 #define SMBsendend 0xD6 /* send end of multi-block message */
570 #define SMBsendtxt 0xD7 /* send text of multi-block message */
573 #define SMBlockread 0x13 /* Lock a range and read */
574 #define SMBwriteunlock 0x14 /* Unlock a range then write */
575 #define SMBreadbraw 0x1a /* read a block of data with no smb header */
576 #define SMBwritebraw 0x1d /* write a block of data with no smb header */
577 #define SMBwritec 0x20 /* secondary write request */
578 #define SMBwriteclose 0x2c /* write a file then close it */
580 /* dos extended protocol */
581 #define SMBreadBraw 0x1A /* read block raw */
582 #define SMBreadBmpx 0x1B /* read block multiplexed */
583 #define SMBreadBs 0x1C /* read block (secondary response) */
584 #define SMBwriteBraw 0x1D /* write block raw */
585 #define SMBwriteBmpx 0x1E /* write block multiplexed */
586 #define SMBwriteBs 0x1F /* write block (secondary request) */
587 #define SMBwriteC 0x20 /* write complete response */
588 #define SMBsetattrE 0x22 /* set file attributes expanded */
589 #define SMBgetattrE 0x23 /* get file attributes expanded */
590 #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
591 #define SMBtrans 0x25 /* transaction - name, bytes in/out */
592 #define SMBtranss 0x26 /* transaction (secondary request/response) */
593 #define SMBioctl 0x27 /* IOCTL */
594 #define SMBioctls 0x28 /* IOCTL (secondary request/response) */
595 #define SMBcopy 0x29 /* copy */
596 #define SMBmove 0x2A /* move */
597 #define SMBecho 0x2B /* echo */
598 #define SMBopenX 0x2D /* open and X */
599 #define SMBreadX 0x2E /* read and X */
600 #define SMBwriteX 0x2F /* write and X */
601 #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
602 #define SMBffirst 0x82 /* find first */
603 #define SMBfunique 0x83 /* find unique */
604 #define SMBfclose 0x84 /* find close */
605 #define SMBinvalid 0xFE /* invalid command */
607 /* Extended 2.0 protocol */
608 #define SMBtrans2 0x32 /* TRANS2 protocol set */
609 #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
610 #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
611 #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
612 #define SMBulogoffX 0x74 /* user logoff */
615 /* these are the TRANS2 sub commands */
616 #define TRANSACT2_OPEN 0
617 #define TRANSACT2_FINDFIRST 1
618 #define TRANSACT2_FINDNEXT 2
619 #define TRANSACT2_QFSINFO 3
620 #define TRANSACT2_SETFSINFO 4
621 #define TRANSACT2_QPATHINFO 5
622 #define TRANSACT2_SETPATHINFO 6
623 #define TRANSACT2_QFILEINFO 7
624 #define TRANSACT2_SETFILEINFO 8
625 #define TRANSACT2_FSCTL 9
626 #define TRANSACT2_IOCTL 10
627 #define TRANSACT2_FINDNOTIFYFIRST 11
628 #define TRANSACT2_FINDNOTIFYNEXT 12
629 #define TRANSACT2_MKDIR 13
632 /* these are the trans2 sub fields for primary requests */
633 #define smb_tpscnt smb_vwv0
634 #define smb_tdscnt smb_vwv1
635 #define smb_mprcnt smb_vwv2
636 #define smb_mdrcnt smb_vwv3
637 #define smb_msrcnt smb_vwv4
638 #define smb_flags smb_vwv5
639 #define smb_timeout smb_vwv6
640 #define smb_pscnt smb_vwv9
641 #define smb_psoff smb_vwv10
642 #define smb_dscnt smb_vwv11
643 #define smb_dsoff smb_vwv12
644 #define smb_suwcnt smb_vwv13
645 #define smb_setup smb_vwv14
646 #define smb_setup0 smb_setup
647 #define smb_setup1 (smb_setup+2)
648 #define smb_setup2 (smb_setup+4)
650 /* these are for the secondary requests */
651 #define smb_spscnt smb_vwv2
652 #define smb_spsoff smb_vwv3
653 #define smb_spsdisp smb_vwv4
654 #define smb_sdscnt smb_vwv5
655 #define smb_sdsoff smb_vwv6
656 #define smb_sdsdisp smb_vwv7
657 #define smb_sfid smb_vwv8
659 /* and these for responses */
660 #define smb_tprcnt smb_vwv0
661 #define smb_tdrcnt smb_vwv1
662 #define smb_prcnt smb_vwv3
663 #define smb_proff smb_vwv4
664 #define smb_prdisp smb_vwv5
665 #define smb_drcnt smb_vwv6
666 #define smb_droff smb_vwv7
667 #define smb_drdisp smb_vwv8
669 /* where to find the base of the SMB packet proper */
670 #define smb_base(buf) (((char *)(buf))+4)
673 #define SUCCESS 0 /* The request was successful. */
674 #define ERRDOS 0x01 /* Error is from the core DOS operating system set. */
675 #define ERRSRV 0x02 /* Error is generated by the server network file manager.*/
676 #define ERRHRD 0x03 /* Error is an hardware error. */
677 #define ERRCMD 0xFF /* Command was not in the "SMB" format. */
680 int Debug1(char *, ...);
686 void dfs_unlogin(void);
687 extern int dcelogin_atmost_once;
691 void ajt_panic(void);
695 char *strdup(char *s);
698 #ifdef REPLACE_STRLEN
702 #ifdef REPLACE_STRSTR
703 char *Strstr(char *s, char *p);
707 #define MIN(a,b) ((a)<(b)?(a):(b))
710 #define MAX(a,b) ((a)>(b)?(a):(b))
714 #define ABS(a) ((a)>0?(a):(-(a)))
726 /* Some POSIX definitions for those without */
729 #define S_IFDIR 0x4000
732 #define S_ISDIR(mode) ((mode & 0xF000) == S_IFDIR)
735 #define S_IRWXU 00700 /* read, write, execute: owner */
738 #define S_IRUSR 00400 /* read permission: owner */
741 #define S_IWUSR 00200 /* write permission: owner */
744 #define S_IXUSR 00100 /* execute permission: owner */
747 #define S_IRWXG 00070 /* read, write, execute: group */
750 #define S_IRGRP 00040 /* read permission: group */
753 #define S_IWGRP 00020 /* write permission: group */
756 #define S_IXGRP 00010 /* execute permission: group */
759 #define S_IRWXO 00007 /* read, write, execute: other */
762 #define S_IROTH 00004 /* read permission: other */
765 #define S_IWOTH 00002 /* write permission: other */
768 #define S_IXOTH 00001 /* execute permission: other */
772 /* these are used in NetServerEnum to choose what to receive */
773 #define SV_TYPE_WORKSTATION 0x00000001
774 #define SV_TYPE_SERVER 0x00000002
775 #define SV_TYPE_SQLSERVER 0x00000004
776 #define SV_TYPE_DOMAIN_CTRL 0x00000008
777 #define SV_TYPE_DOMAIN_BAKCTRL 0x00000010
778 #define SV_TYPE_TIME_SOURCE 0x00000020
779 #define SV_TYPE_AFP 0x00000040
780 #define SV_TYPE_NOVELL 0x00000080
781 #define SV_TYPE_DOMAIN_MEMBER 0x00000100
782 #define SV_TYPE_PRINTQ_SERVER 0x00000200
783 #define SV_TYPE_DIALIN_SERVER 0x00000400
784 #define SV_TYPE_SERVER_UNIX 0x00000800
785 #define SV_TYPE_NT 0x00001000
786 #define SV_TYPE_WFW 0x00002000
787 #define SV_TYPE_SERVER_MFPN 0x00004000
788 #define SV_TYPE_SERVER_NT 0x00008000
789 #define SV_TYPE_POTENTIAL_BROWSER 0x00010000
790 #define SV_TYPE_BACKUP_BROWSER 0x00020000
791 #define SV_TYPE_MASTER_BROWSER 0x00040000
792 #define SV_TYPE_DOMAIN_MASTER 0x00080000
793 #define SV_TYPE_SERVER_OSF 0x00100000
794 #define SV_TYPE_SERVER_VMS 0x00200000
795 #define SV_TYPE_WIN95_PLUS 0x00400000
796 #define SV_TYPE_ALTERNATE_XPORT 0x20000000
797 #define SV_TYPE_LOCAL_LIST_ONLY 0x40000000
798 #define SV_TYPE_DOMAIN_ENUM 0x80000000
799 #define SV_TYPE_ALL 0xFFFFFFFF
801 /* What server type are we currently - JHT Says we ARE 4.20 */
803 /* Version 4.0 - never made public */
804 /* Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9 */
805 /* - Reappeared in 1.9.16p11 with fixed smbd services */
806 /* Version 4.20 - To indicate that nmbd and browsing now works better */
807 #define MAJOR_VERSION 0x04
808 #define MINOR_VERSION 0x02
810 /* Browser Election Values */
811 #define BROWSER_ELECTION_VERSION 0x010f
812 #define BROWSER_CONSTANT 0xaa55
815 /* Capabilities. see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */
817 #define CAP_RAW_MODE 0x0001
818 #define CAP_MPX_MODE 0x0002
819 #define CAP_UNICODE 0x0004
820 #define CAP_LARGE_FILES 0x0008
821 #define CAP_NT_SMBS 0x0010
822 #define CAP_RPC_REMOTE_APIS 0x0020
823 #define CAP_STATUS32 0x0040
824 #define CAP_LEVEL_II_OPLOCKS 0x0080
825 #define CAP_LOCK_AND_READ 0x0100
826 #define CAP_NT_FIND 0x0200
827 #define CAP_DFS 0x1000
828 #define CAP_LARGE_READX 0x4000
830 /* protocol types. It assumes that higher protocols include lower protocols
832 enum protocol_types {PROTOCOL_NONE,PROTOCOL_CORE,PROTOCOL_COREPLUS,PROTOCOL_LANMAN1,PROTOCOL_LANMAN2,PROTOCOL_NT1};
834 /* security levels */
835 enum security_types {SEC_SHARE,SEC_USER,SEC_SERVER};
838 enum printing_types {PRINT_BSD,PRINT_SYSV,PRINT_AIX,PRINT_HPUX,
839 PRINT_QNX,PRINT_PLP,PRINT_LPRNG};
843 enum case_handling {CASE_LOWER,CASE_UPPER};
846 /* Macros to get at offsets within smb_lkrng and smb_unlkrng
847 structures. We cannot define these as actual structures
848 due to possible differences in structure packing
849 on different machines/compilers. */
851 #define SMB_LPID_OFFSET(indx) (10 * (indx))
852 #define SMB_LKOFF_OFFSET(indx) ( 2 + (10 * (indx)))
853 #define SMB_LKLEN_OFFSET(indx) ( 6 + (10 * (indx)))
855 /* Macro to cache an error in a write_bmpx_struct */
856 #define CACHE_ERROR(w,c,e) ((w)->wr_errclass = (c), (w)->wr_error = (e), \
857 w->wr_discard = True, -1)
858 /* Macro to test if an error has been cached for this fnum */
859 #define HAS_CACHED_ERROR(fnum) (Files[(fnum)].open && \
860 Files[(fnum)].wbmpx_ptr && \
861 Files[(fnum)].wbmpx_ptr->wr_discard)
862 /* Macro to turn the cached error into an error packet */
863 #define CACHED_ERROR(fnum) cached_error_packet(inbuf,outbuf,fnum,__LINE__)
865 /* these are the datagram types */
866 #define DGRAM_DIRECT_UNIQUE 0x10
868 #define ERROR(class,x) error_packet(inbuf,outbuf,class,x,__LINE__)
870 /* this is how errors are generated */
871 #define UNIXERROR(defclass,deferror) unix_error_packet(inbuf,outbuf,defclass,deferror,__LINE__)
873 #define ROUNDUP(x,g) (((x)+((g)-1))&~((g)-1))
876 * Global value meaing that the smb_uid field should be
877 * ingored (in share level security and protocol level == CORE)
880 #define UID_FIELD_INVALID 0
881 #define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */