From 0a23cde8efea06f81c6d34227b71dab627cc87b9 Mon Sep 17 00:00:00 2001 From: Andreas Schneider Date: Tue, 9 May 2017 15:48:09 +0200 Subject: [PATCH] packaging: Remove LSB packaging This hasn't been touched since 2001. Signed-off-by: Andreas Schneider Reviewed-by: David Disseldorp --- packaging/LSB/README | 6 - packaging/LSB/lsb-samba.spec | 100 ------------ packaging/LSB/samba.sh | 80 ---------- packaging/LSB/samba.xinetd | 15 -- packaging/LSB/smb.conf | 285 ----------------------------------- 5 files changed, 486 deletions(-) delete mode 100644 packaging/LSB/README delete mode 100644 packaging/LSB/lsb-samba.spec delete mode 100755 packaging/LSB/samba.sh delete mode 100644 packaging/LSB/samba.xinetd delete mode 100644 packaging/LSB/smb.conf diff --git a/packaging/LSB/README b/packaging/LSB/README deleted file mode 100644 index 4ff0b99d769..00000000000 --- a/packaging/LSB/README +++ /dev/null @@ -1,6 +0,0 @@ -README.lsb - 1 July 2001 ------------------------- - -The files in this directory allow you to build an LSB-compliant -version of SAMBA using the RPM software and the LSB development -environment. diff --git a/packaging/LSB/lsb-samba.spec b/packaging/LSB/lsb-samba.spec deleted file mode 100644 index 516eaa430eb..00000000000 --- a/packaging/LSB/lsb-samba.spec +++ /dev/null @@ -1,100 +0,0 @@ -# -# "$Id: lsb-samba.spec,v 1.2 2001/07/03 01:01:12 jra Exp $" -# -# Linux Standards Based RPM "spec" file for SAMBA. -# - -Summary: SAMBA -Name: lsb-samba -Version: 2.2.1 -Release: 0 -Copyright: GPL -Group: System Environment/Daemons -Source: ftp://ftp.samba.org/pub/samba/samba-%{version}.tar.gz -Url: http://www.samba.org -Packager: Michael Sweet -Vendor: SAMBA Team - -# Require the "lsb" package, which guarantees LSB compliance. -Requires: lsb - -# use BuildRoot so as not to disturb the version already installed -BuildRoot: /var/tmp/%{name}-root - -%description - -%prep -%setup - -%build -export LDFLAGS="-L/usr/lib/lsb --dynamic-linker=/lib/ld-lsb.so.1" - -./configure --with-fhs --prefix=/usr --sysconfdir=/etc \ - --sharedstatedir=/var --datadir=/usr/share \ - --with-configdir=/etc/samba \ - --with-swatdir=/usr/share/samba/swat - -# If we got this far, all prerequisite libraries must be here. -make - -%install -# Make sure the RPM_BUILD_ROOT directory exists. -rm -rf $RPM_BUILD_ROOT -mkdir $RPM_BUILD_ROOT - -make \ - BASEDIR=$RPM_BUILD_ROOT/usr \ - BINDIR=$RPM_BUILD_ROOT/usr/bin \ - CODEPAGEDIR=$RPM_BUILD_ROOT/usr/share/samba/codepages \ - CONFIGDIR=$RPM_BUILD_ROOT/etc/samba \ - INCLUDEDIR=$RPM_BUILD_ROOT/usr/include \ - LIBDIR=$RPM_BUILD_ROOT/usr/lib \ - LOCKDIR=$RPM_BUILD_ROOT/var/lock/samba \ - LOGFILEBASE=$RPM_BUILD_ROOT/var/log/samba \ - MANDIR=$RPM_BUILD_ROOT/usr/share/man \ - SBINDIR=$RPM_BUILD_ROOT/usr/sbin \ - SWATDIR=$RPM_BUILD_ROOT/usr/share/samba/swat \ - VARDIR=$RPM_BUILD_ROOT/var \ - install - -mkdir -p $RPM_BUILD_ROOT/etc/init.d -install -m 700 packaging/LSB/samba.sh /etc/init.d/samba - -mkdir -p $RPM_BUILD_ROOT/etc/samba -install -m 644 packaging/LSB/smb.conf /etc/samba - -mkdir -p $RPM_BUILD_ROOT/etc/xinetd.d -install -m 644 packaging/LSB/samba.xinetd /etc/xinetd.d/samba - -%post -/usr/lib/lsb/install_initd /etc/init.d/samba - -%preun -/usr/lib/lsb/remove_initd /etc/init.d/samba - -%clean -rm -rf $RPM_BUILD_ROOT - -%files -%defattr(-,root,root) -%dir /etc/init.d -/etc/init.d/samba -%dir /etc/samba -%config(noreplace) /etc/samba/smb.conf -%dir /etc/samba/private -%dir /etc/xinetd.d -%config(noreplace) /etc/xinetd.d/samba -%dir /usr/bin -/usr/bin/* -%dir /usr/sbin -/usr/sbin/* -%dir /usr/share/man -/usr/share/man/* -%dir /usr/share/samba -/usr/share/samba/* -%dir /var/lock/samba -%dir /var/log/samba - -# -# End of "$Id: lsb-samba.spec,v 1.2 2001/07/03 01:01:12 jra Exp $". -# diff --git a/packaging/LSB/samba.sh b/packaging/LSB/samba.sh deleted file mode 100755 index 99fa1b0117d..00000000000 --- a/packaging/LSB/samba.sh +++ /dev/null @@ -1,80 +0,0 @@ -#!/bin/sh -# -# "$Id: samba.sh,v 1.2 2001/07/03 01:01:12 jra Exp $" -# -# SAMBA startup (init) script for LSB-compliant systems. -# -# Provides: smbd nmbd -# Required-Start: 3 5 -# Required-Stop: 0 2 1 6 -# Default-Start: 3 5 -# Default-Stop: 0 2 1 6 -# Description: Starts and stops the SAMBA smbd and nmbd daemons \ -# used to provide SMB network services. -# - -# Source LSB function library. -. /lib/lsb/init-functions - -# Check that smb.conf exists. -if test ! -f /etc/samba/smb.conf; then - log_failure_msg "The smb.conf file does not exist." - exit 6 -fi - -# Make sure that smbd and nmbd exist... -if test ! -f /usr/sbin/nmbd -o ! -f /usr/sbin/smbd; then - log_failure_msg "The nmbd and/or smbd daemons are not installed." - exit 5 -fi - -# See how we were called. -case "$1" in - start) - start_daemon nmbd -D - start_daemon smbd -D - log_success_msg "Started SMB services." - ;; - - stop) - killproc smbd - killproc nmbd - log_success_msg "Shutdown SMB services." - ;; - - reload) - # smbd and nmbd automatically re-read the smb.conf file... - log_success_msg "Reload not necessary with SAMBA." - ;; - - status) - if test -z "`pidofproc smbd`"; then - log_success_msg "smbd is not running." - else - log_success_msg "smbd is running." - fi - if test -z "`pidofproc nmbd`"; then - log_success_msg "nmbd is not running." - else - log_success_msg "nmbd is running." - fi - ;; - - - restart | force-reload) - $0 stop - $0 start - ;; - - *) - echo "Usage: smb {start|stop|reload|force-reload|restart|status}" - exit 1 - ;; -esac - -# Return "success" -exit 0 - -# -# End of "$Id: samba.sh,v 1.2 2001/07/03 01:01:12 jra Exp $". -# diff --git a/packaging/LSB/samba.xinetd b/packaging/LSB/samba.xinetd deleted file mode 100644 index 8c38b354218..00000000000 --- a/packaging/LSB/samba.xinetd +++ /dev/null @@ -1,15 +0,0 @@ -# default: off -# description: SWAT is the Samba Web Admin Tool. Use swat \ -# to configure your Samba server. To use SWAT, \ -# connect to port 901 with your favorite web browser. -service swat -{ - port = 901 - socket_type = stream - wait = no - only_from = localhost - user = root - server = /usr/sbin/swat - log_on_failure += USERID - disable = yes -} diff --git a/packaging/LSB/smb.conf b/packaging/LSB/smb.conf deleted file mode 100644 index 36c9839346e..00000000000 --- a/packaging/LSB/smb.conf +++ /dev/null @@ -1,285 +0,0 @@ -# This is the main Samba configuration file. You should read the -# smb.conf(5) manual page in order to understand the options listed -# here. Samba has a huge number of configurable options (perhaps too -# many!) most of which are not shown in this example -# -# Any line which starts with a ; (semi-colon) or a # (hash) -# is a comment and is ignored. In this example we will use a # -# for commentry and a ; for parts of the config file that you -# may wish to enable -# -# NOTE: Whenever you modify this file you should run the command "testparm" -# to check that you have not made any basic syntactic errors. -# -#======================= Global Settings ===================================== -[global] - -# workgroup = NT-Domain-Name or Workgroup-Name - workgroup = MYGROUP - -# server string is the equivalent of the NT Description field - server string = Samba Server - -# This option is important for security. It allows you to restrict -# connections to machines which are on your local network. The -# following example restricts access to two C class networks and -# the "loopback" interface. For more examples of the syntax see -# the smb.conf man page -; hosts allow = 192.168.1. 192.168.2. 127. - -# if you want to automatically load your printer list rather -# than setting them up individually then you'll need this - printcap name = /etc/printcap - load printers = yes - -# It should not be necessary to spell out the print system type unless -# yours is non-standard. Currently supported print systems include: -# bsd, sysv, plp, lprng, aix, hpux, qnx -; printing = bsd - -# Uncomment this if you want a guest account, you must add this to /etc/passwd -# otherwise the user "nobody" is used -; guest account = pcguest - -# this tells Samba to use a separate log file for each machine -# that connects - log file = /var/log/samba/log.%m - -# Put a capping on the size of the log files (in Kb). - max log size = 50 - -# Security mode. Most people will want user level security. See -# security_level.txt for details. - security = user -# Use password server option only with security = server -; password server = - -# Password Level allows matching of _n_ characters of the password for -# all combinations of upper and lower case. -; username level = 8 - -# You may wish to use password encryption. Please read -# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. -# Do not enable this option unless you have read those documents -; encrypt passwords = yes -; smb passwd file = /etc/samba/smbpasswd - -# The following are needed to allow password changing from Windows to -# update the Linux sytsem password also. -# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above. -# NOTE2: You do NOT need these to allow workstations to change only -# the encrypted SMB passwords. They allow the Unix password -# to be kept in sync with the SMB password. -; unix password sync = Yes -; passwd program = /usr/bin/passwd %u -; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully* - -# Unix users can map to different SMB User names -; username map = /etc/samba/smbusers - -# Using the following line enables you to customise your configuration -# on a per machine basis. The %m gets replaced with the netbios name -# of the machine that is connecting -; include = /etc/samba/smb.conf.%m - -# Configure Samba to use multiple interfaces -# If you have multiple network interfaces then you must list them -# here. See the man page for details. -; interfaces = 192.168.12.2/24 192.168.13.2/24 - -# Configure remote browse list synchronisation here -# request announcement to, or browse list sync from: -# a specific host or from / to a whole subnet (see below) -; remote browse sync = 192.168.3.25 192.168.5.255 -# Cause this host to announce itself to local subnets here -; remote announce = 192.168.1.255 192.168.2.44 - -# Browser Control Options: -# set local master to no if you don't want Samba to become a master -# browser on your network. Otherwise the normal election rules apply -; local master = no - -# OS Level determines the precedence of this server in master browser -# elections. The default value should be reasonable -; os level = 33 - -# Domain Master specifies Samba to be the Domain Master Browser. This -# allows Samba to collate browse lists between subnets. Don't use this -# if you already have a Windows NT domain controller doing this job -; domain master = yes - -# Preferred Master causes Samba to force a local browser election on startup -# and gives it a slightly higher chance of winning the election -; preferred master = yes - -# Use only if you have an NT server on your network that has been -# configured at install time to be a primary domain controller. -; domain controller = - -# Enable this if you want Samba to be a domain logon server for -# Windows95 workstations. -; domain logons = yes - -# if you enable domain logons then you may want a per-machine or -# per user logon script -# run a specific logon batch file per workstation (machine) -; logon script = %m.bat -# run a specific logon batch file per username -; logon script = %U.bat - -# Where to store roving profiles (only for Win95 and WinNT) -# %L substitutes for this servers netbios name, %U is username -# You must uncomment the [Profiles] share below -; logon path = \\%L\Profiles\%U - -# All NetBIOS names must be resolved to IP Addresses -# 'Name Resolve Order' allows the named resolution mechanism to be specified -# the default order is "host lmhosts wins bcast". "host" means use the unix -# system gethostbyname() function call that will use either /etc/hosts OR -# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf -# and the /etc/resolv.conf file. "host" therefore is system configuration -# dependant. This parameter is most often of use to prevent DNS lookups -# in order to resolve NetBIOS names to IP Addresses. Use with care! -# The example below excludes use of name resolution for machines that are NOT -# on the local network segment -# - OR - are not deliberately to be known via lmhosts or via WINS. -; name resolve order = wins lmhosts bcast - -# Windows Internet Name Serving Support Section: -# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server -; wins support = yes - -# WINS Server - Tells the NMBD components of Samba to be a WINS Client -# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both -; wins server = w.x.y.z - -# WINS Proxy - Tells Samba to answer name resolution queries on -# behalf of a non WINS capable client, for this to work there must be -# at least one WINS Server on the network. The default is NO. -; wins proxy = yes - -# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names -# via DNS nslookups. The built-in default for versions 1.9.17 is yes, -# this has been changed in version 1.9.18 to no. - dns proxy = no - -# Case Preservation can be handy - system default is _no_ -# NOTE: These can be set on a per share basis -; preserve case = no -; short preserve case = no -# Default case is normally upper case for all DOS files -; default case = lower -# Be very careful with case sensitivity - it can break things! -; case sensitive = no - -#============================ Share Definitions ============================== -[homes] - comment = Home Directories - browseable = no - writable = yes - -# Un-comment the following and create the netlogon directory for Domain Logons -; [netlogon] -; comment = Network Logon Service -; path = /home/netlogon -; guest ok = yes -; writable = no -; share modes = no - - -# Un-comment the following to provide a specific roving profile share -# the default is to use the user's home directory -;[Profiles] -; path = /home/profiles -; browseable = no -; guest ok = yes - - -# NOTE: If you have a BSD-style print system there is no need to -# specifically define each individual printer -[printers] - comment = All Printers - path = /var/spool/samba - browseable = no -# Set public = yes to allow user 'guest account' to print - guest ok = no - writable = no - printable = yes - -# This one is useful for people to share files -;[tmp] -; comment = Temporary file space -; path = /tmp -; read only = no -; public = yes - -# A publicly accessible directory, but read only, except for people in -# the "staff" group -;[public] -; comment = Public Stuff -; path = /home/samba -; public = yes -; read only = yes -; write list = @staff - -# Other examples. -# -# A private printer, usable only by fred. Spool data will be placed in fred's -# home directory. Note that fred must have write access to the spool directory, -# wherever it is. -;[fredsprn] -; comment = Fred's Printer -; valid users = fred -; path = /homes/fred -; printer = freds_printer -; public = no -; writable = no -; printable = yes - -# A private directory, usable only by fred. Note that fred requires write -# access to the directory. -;[fredsdir] -; comment = Fred's Service -; path = /usr/somewhere/private -; valid users = fred -; public = no -; writable = yes -; printable = no - -# a service which has a different directory for each machine that connects -# this allows you to tailor configurations to incoming machines. You could -# also use the %u option to tailor it by user name. -# The %m gets replaced with the machine name that is connecting. -;[pchome] -; comment = PC Directories -; path = /usr/pc/%m -; public = no -; writable = yes - -# A publicly accessible directory, read/write to all users. Note that all files -# created in the directory by users will be owned by the default user, so -# any user with access can delete any other user's files. Obviously this -# directory must be writable by the default user. Another user could of course -# be specified, in which case all files would be owned by that user instead. -;[public] -; path = /usr/somewhere/else/public -; public = yes -; only guest = yes -; writable = yes -; printable = no - -# The following two entries demonstrate how to share a directory so that two -# users can place files there that will be owned by the specific users. In this -# setup, the directory should be writable by both users and should have the -# sticky bit set on it to prevent abuse. Obviously this could be extended to -# as many users as required. -;[myshare] -; comment = Mary's and Fred's stuff -; path = /usr/somewhere/shared -; valid users = mary fred -; public = no -; writable = yes -; printable = no -; create mask = 0765 - - -- 2.34.1