gd/samba-autobuild/.git
7 years agolib/crypto: Detect CommonCrypto and use it if available
Matthieu Patou [Mon, 12 Mar 2012 23:21:28 +0000 (16:21 -0700)]
lib/crypto: Detect CommonCrypto and use it if available

CommonCrypto/CommonDigest is available on Mac and there is function in
the libc for MD5 calculation. MD5Final is a C define of CC_MD5_Final.
Under some circumstance we have the symbol defined twice in samba
binaries on Snow Leopard at least.

By detecting CommonCrypto/CommonDigest we end up always using the system
version if available.

7 years agolib/tdb2: make summary handle capabilities properly.
Rusty Russell [Wed, 14 Mar 2012 03:21:26 +0000 (13:51 +1030)]
lib/tdb2: make summary handle capabilities properly.

Another PPC issue (endian?) revealed that the summary code did not handle
capabilities correctly: in fact, it went into an endless loop.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Wed Mar 14 06:51:43 CET 2012 on sn-devel-104

7 years agolib/tdb2: fix error string formatting.
Rusty Russell [Wed, 14 Mar 2012 03:07:51 +0000 (13:37 +1030)]
lib/tdb2: fix error string formatting.

This caused a crash on PPC64 when we failed the mmap (found by failtest,
reported by Amitay)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
7 years agolib/tdb2: Add gcc-style format attribute to tdb_logerr.
Rusty Russell [Wed, 14 Mar 2012 02:38:58 +0000 (13:08 +1030)]
lib/tdb2: Add gcc-style format attribute to tdb_logerr.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
7 years agoFix bug #8811 - sd_has_inheritable_components segfaults on an SD that se_access_check...
Jeremy Allison [Wed, 14 Mar 2012 02:26:02 +0000 (19:26 -0700)]
Fix bug #8811 - sd_has_inheritable_components segfaults on an SD that se_access_check accepts.

Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Wed Mar 14 05:08:03 CET 2012 on sn-devel-104

7 years agoFix bug #8795 - Samba does not handle the Owner Rights permissions at all
Richard Sharpe [Tue, 13 Mar 2012 23:47:17 +0000 (16:47 -0700)]
Fix bug #8795 - Samba does not handle the Owner Rights permissions at all

Signed-off-by: Jeremy Allison <jra@samba.org>
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Wed Mar 14 02:26:34 CET 2012 on sn-devel-104

7 years agoSecond part of fix for bug #7933 - samba fails to honor SEC_STD_WRITE_OWNER bit with...
Jeremy Allison [Tue, 13 Mar 2012 19:16:26 +0000 (12:16 -0700)]
Second part of fix for bug #7933 - samba fails to honor SEC_STD_WRITE_OWNER bit with the acl_xattr module.

Error found by Andrew Bartlett <abartlet@samba.org> and Ricky Nance
<ricky.nance@weaubleau.k12.mo.us>.

Don't use a pointer when you really mean a bool flag.

Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Tue Mar 13 21:56:15 CET 2012 on sn-devel-104

7 years agoFix bug #8807 - dcerpc_lsa_lookup_sids_noalloc() crashes when groups has more than...
Christian Ambach [Tue, 13 Mar 2012 17:07:11 +0000 (10:07 -0700)]
Fix bug #8807 - dcerpc_lsa_lookup_sids_noalloc() crashes when groups has more than 1000 groups

Use correct talloc heirarchy.

Signed-off-by: Jeremy Allison <jra@samba.org>
7 years agos4-python: Add missing python source file encoding.
Andreas Schneider [Tue, 13 Mar 2012 16:14:37 +0000 (17:14 +0100)]
s4-python: Add missing python source file encoding.

See http://www.python.org/dev/peps/pep-0263/

Autobuild-User: Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date: Tue Mar 13 19:31:09 CET 2012 on sn-devel-104

7 years agos4-python: Remove env from non-executable webserver script.
Andreas Schneider [Tue, 13 Mar 2012 10:59:21 +0000 (11:59 +0100)]
s4-python: Remove env from non-executable webserver script.

7 years agos4-python: Remove env from non-executable samba_tool scripts.
Andreas Schneider [Tue, 13 Mar 2012 10:58:19 +0000 (11:58 +0100)]
s4-python: Remove env from non-executable samba_tool scripts.

7 years agos4-python: Remove env from non-executable dcerpc scripts.
Andreas Schneider [Tue, 13 Mar 2012 10:57:33 +0000 (11:57 +0100)]
s4-python: Remove env from non-executable dcerpc scripts.

7 years agos4-python: Remove execute flag from non-executable rpc_talloc script.
Andreas Schneider [Tue, 13 Mar 2012 10:56:25 +0000 (11:56 +0100)]
s4-python: Remove execute flag from non-executable rpc_talloc script.

7 years agos4-python: Remove env from non-executable blackbox test scripts.
Andreas Schneider [Tue, 13 Mar 2012 10:55:50 +0000 (11:55 +0100)]
s4-python: Remove env from non-executable blackbox test scripts.

7 years agos4-python: Remove execute flag from ndrdump blackbox script.
Andreas Schneider [Tue, 13 Mar 2012 10:55:05 +0000 (11:55 +0100)]
s4-python: Remove execute flag from ndrdump blackbox script.

7 years agos4-python: Remove env from non-executable test scripts.
Andreas Schneider [Tue, 13 Mar 2012 10:54:11 +0000 (11:54 +0100)]
s4-python: Remove env from non-executable test scripts.

7 years agos4-python: Remove env from non-executable netcmd scripts.
Andreas Schneider [Tue, 13 Mar 2012 10:35:03 +0000 (11:35 +0100)]
s4-python: Remove env from non-executable netcmd scripts.

7 years agos4-python: Remove execute flag from netcmd scripts.
Andreas Schneider [Tue, 13 Mar 2012 10:27:03 +0000 (11:27 +0100)]
s4-python: Remove execute flag from netcmd scripts.

7 years agos4-python: Remove env from non-executable samba scripts.
Andreas Schneider [Tue, 13 Mar 2012 10:24:38 +0000 (11:24 +0100)]
s4-python: Remove env from non-executable samba scripts.

7 years agos4-python: Remove execute flag of upgradehelpers.py.
Andreas Schneider [Tue, 13 Mar 2012 10:23:22 +0000 (11:23 +0100)]
s4-python: Remove execute flag of upgradehelpers.py.

7 years agos3-spoolss: Consistently fail OpenPrinterEx with "" printername
Andrew Bartlett [Tue, 13 Mar 2012 10:59:32 +0000 (21:59 +1100)]
s3-spoolss: Consistently fail OpenPrinterEx with "" printername

samba3.rpc.spoolss.printserver has become a flakey test recently, and this
papers over the real problem.

Andrew Bartlett

Signed-off-by: Günther Deschner <gd@samba.org>
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Tue Mar 13 17:51:00 CET 2012 on sn-devel-104

7 years agonbench: Fix typo.
Jelmer Vernooij [Mon, 12 Mar 2012 18:36:51 +0000 (19:36 +0100)]
nbench: Fix typo.

Autobuild-User: Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date: Tue Mar 13 14:53:07 CET 2012 on sn-devel-104

7 years agosamba.8: Fix typo: deamon -> daemon.
Jelmer Vernooij [Mon, 12 Mar 2012 18:34:43 +0000 (19:34 +0100)]
samba.8: Fix typo: deamon -> daemon.

7 years agosamba_dnsupdate: Mention contents of invalid line when encountering parsing error.
Jelmer Vernooij [Mon, 12 Mar 2012 18:29:34 +0000 (19:29 +0100)]
samba_dnsupdate: Mention contents of invalid line when encountering parsing error.

Bug: https://bugzilla.samba.org/show_bug.cgi?id=8809

7 years agosamba_dnsupdate: Raise proper exception when getting unexpected DNS reply.
Jelmer Vernooij [Mon, 12 Mar 2012 18:25:39 +0000 (19:25 +0100)]
samba_dnsupdate: Raise proper exception when getting unexpected DNS reply.

7 years agosamba_dnsupdate: Use docstrings, which show up nicely in API docs.
Jelmer Vernooij [Mon, 12 Mar 2012 18:23:50 +0000 (19:23 +0100)]
samba_dnsupdate: Use docstrings, which show up nicely in API docs.

7 years agos3-rpc: Decrypt with the proper session key in CreateTrustedDomainEx2.
Alexander Bokovoy [Fri, 2 Mar 2012 14:18:16 +0000 (16:18 +0200)]
s3-rpc: Decrypt with the proper session key in CreateTrustedDomainEx2.

On LSA and SAMR pipes session_key is truncated to 16 byte when doing encryption/decryption.
However, this was not done for trusted domain-related modifying operations.

As result, Samba 4 client libraries do not work against Samba 3 while working
against Windows 2008 r2.

Solved this by introducing "session_extract_session_key()" function that allows to specify
intent of use of the key.

Signed-off-by: Andreas Schneider <asn@samba.org>
Autobuild-User: Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date: Tue Mar 13 12:23:44 CET 2012 on sn-devel-104

7 years agoselftest: samba3.smbtorture_s3.LOCAL-TALLOC-DICT works now
Stefan Metzmacher [Tue, 13 Mar 2012 07:25:58 +0000 (08:25 +0100)]
selftest: samba3.smbtorture_s3.LOCAL-TALLOC-DICT works now

metze

Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Tue Mar 13 10:38:20 CET 2012 on sn-devel-104

7 years agos3:torture: fix segfault in LOCAL-TALLOC-DICT
Stefan Metzmacher [Tue, 13 Mar 2012 07:22:03 +0000 (08:22 +0100)]
s3:torture: fix segfault in LOCAL-TALLOC-DICT

talloc_dict_set() expects a pointer to an talloc'ed pointer.

metze

7 years agos3:torture: talloc_dict_traverse() returns the number of entries
Stefan Metzmacher [Tue, 13 Mar 2012 07:21:15 +0000 (08:21 +0100)]
s3:torture: talloc_dict_traverse() returns the number of entries

metze

7 years agoselftest.run: Use subunit version of iso8601.
Jelmer Vernooij [Sun, 11 Mar 2012 22:56:56 +0000 (23:56 +0100)]
selftest.run: Use subunit version of iso8601.

Autobuild-User: Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date: Mon Mar 12 01:36:25 CET 2012 on sn-devel-104

7 years agoselftest.py: Remove some unnecessary checks.
Jelmer Vernooij [Sun, 11 Mar 2012 20:46:00 +0000 (21:46 +0100)]
selftest.py: Remove some unnecessary checks.

7 years agoselftest.py: Move some infrastructure for running commands to selftest.run, with...
Jelmer Vernooij [Sun, 11 Mar 2012 19:58:00 +0000 (20:58 +0100)]
selftest.py: Move some infrastructure for running commands to selftest.run, with tests.

7 years agoupgradedns: Remove unused import.
Jelmer Vernooij [Sun, 11 Mar 2012 18:58:47 +0000 (19:58 +0100)]
upgradedns: Remove unused import.

7 years agosamba-tool: Write diagnostics to stderr rather than stdout.
Jelmer Vernooij [Sun, 11 Mar 2012 18:58:23 +0000 (19:58 +0100)]
samba-tool: Write diagnostics to stderr rather than stdout.

7 years agos4:upgradeprovision - fix some output messages
Matthias Dieter Wallnöfer [Sun, 11 Mar 2012 09:29:10 +0000 (10:29 +0100)]
s4:upgradeprovision - fix some output messages

Autobuild-User: Matthias Dieter Wallnöfer <mdw@samba.org>
Autobuild-Date: Sun Mar 11 21:54:54 CET 2012 on sn-devel-104

7 years agos3: Improve statvfs support
Brad Smith [Sat, 10 Mar 2012 18:16:06 +0000 (19:16 +0100)]
s3: Improve statvfs support

Autobuild-User: Volker Lendecke <vl@samba.org>
Autobuild-Date: Sun Mar 11 14:18:04 CET 2012 on sn-devel-104

7 years agowaf: Do not use standards.h on darwin
Volker Lendecke [Sat, 10 Mar 2012 09:26:10 +0000 (10:26 +0100)]
waf: Do not use standards.h on darwin

We get a nasty warning every time we include that

7 years agos4 dns: Test deleting records and fix a small bu
Kai Blin [Sat, 10 Mar 2012 23:25:57 +0000 (00:25 +0100)]
s4 dns: Test deleting records and fix a small bu

Autobuild-User: Kai Blin <kai@samba.org>
Autobuild-Date: Sun Mar 11 02:27:45 CET 2012 on sn-devel-104

7 years agos4 dns: Be less chatty during tests
Kai Blin [Sat, 10 Mar 2012 23:25:05 +0000 (00:25 +0100)]
s4 dns: Be less chatty during tests

7 years agos4 dns: Clean up tests a bit
Kai Blin [Sat, 10 Mar 2012 22:49:18 +0000 (23:49 +0100)]
s4 dns: Clean up tests a bit

7 years agos4 dns: Support TXT updates, add tests
Kai Blin [Sat, 10 Mar 2012 22:48:44 +0000 (23:48 +0100)]
s4 dns: Support TXT updates, add tests

7 years agos4 dns: Support TXT queries
Kai Blin [Sat, 10 Mar 2012 22:47:29 +0000 (23:47 +0100)]
s4 dns: Support TXT queries

7 years agos3 selftest: Allow DNS updates during testing
Kai Blin [Sat, 10 Mar 2012 22:43:44 +0000 (23:43 +0100)]
s3 selftest: Allow DNS updates during testing

7 years agotdb_wrap: Move to specific directory.
Jelmer Vernooij [Sat, 10 Mar 2012 20:33:11 +0000 (21:33 +0100)]
tdb_wrap: Move to specific directory.

It's a bit confusing to mix low-level and high-level libraries.  We had
multiple libraries in one directory, and there were have circular
dependencies with other libraries outside that directory (in this case,
samba-hostconfig).

Autobuild-User: Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date: Sat Mar 10 23:13:01 CET 2012 on sn-devel-104

7 years agosamba.tests.blackbox.samba_tool_drs: Remove unused import.
Jelmer Vernooij [Wed, 7 Mar 2012 09:30:34 +0000 (10:30 +0100)]
samba.tests.blackbox.samba_tool_drs: Remove unused import.

7 years agowscript: Include talloc, tdb and ldb in pydoctor output.
Jelmer Vernooij [Tue, 6 Mar 2012 22:40:39 +0000 (23:40 +0100)]
wscript: Include talloc, tdb and ldb in pydoctor output.

7 years agosamba.samdb: Fix formatting of arguments in docstring.
Jelmer Vernooij [Tue, 6 Mar 2012 22:31:55 +0000 (23:31 +0100)]
samba.samdb: Fix formatting of arguments in docstring.

7 years agopydoctor: Specify --project-name.
Jelmer Vernooij [Tue, 6 Mar 2012 22:21:44 +0000 (23:21 +0100)]
pydoctor: Specify --project-name.

7 years agopython: samba: Use relative import for _glue.
Jelmer Vernooij [Tue, 6 Mar 2012 22:20:12 +0000 (23:20 +0100)]
python: samba: Use relative import for _glue.

For some reason, using an absolute import breaks pydoctor.

7 years agotevent: Install tevent.py into PYTHONARCHDIR rather than PYTHONDIR for consistency...
Jelmer Vernooij [Tue, 6 Mar 2012 17:07:20 +0000 (18:07 +0100)]
tevent: Install tevent.py into PYTHONARCHDIR rather than PYTHONDIR for consistency with other Samba scripts.

7 years agoselftest: fix running additional smbclient test for non-spnego session setup
Andrew Bartlett [Sat, 10 Mar 2012 17:45:05 +0000 (04:45 +1100)]
selftest: fix running additional smbclient test for non-spnego session setup

Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Sat Mar 10 20:46:05 CET 2012 on sn-devel-104

7 years agos3: fix build on AIX
Björn Jacke [Sat, 10 Mar 2012 10:15:12 +0000 (11:15 +0100)]
s3: fix build on AIX

Autobuild-User: Björn Jacke <bj@sernet.de>
Autobuild-Date: Sat Mar 10 19:07:20 CET 2012 on sn-devel-104

7 years agos3: Add smb_request_done
Volker Lendecke [Sun, 4 Mar 2012 11:10:04 +0000 (12:10 +0100)]
s3: Add smb_request_done

This is used to enable async chained command sequences. A synchronous
reply_xxx command does not need to take are anymore about and_x
chaining. The async commands (pipe r/w at this moment) must do so
however. When finished, they must inform the main chain engine that
they are finished with a smb_request_done call.

Autobuild-User: Volker Lendecke <vl@samba.org>
Autobuild-Date: Sat Mar 10 17:14:05 CET 2012 on sn-devel-104

7 years agos3: Remove unused smb_request->done
Volker Lendecke [Fri, 2 Mar 2012 23:59:56 +0000 (00:59 +0100)]
s3: Remove unused smb_request->done

7 years agos3: Remove unused smb_request->chain_outbuf
Volker Lendecke [Fri, 2 Mar 2012 23:34:27 +0000 (00:34 +0100)]
s3: Remove unused smb_request->chain_outbuf

7 years agos3: Remove "req_wct_ofs()"
Volker Lendecke [Fri, 2 Mar 2012 23:33:15 +0000 (00:33 +0100)]
s3: Remove "req_wct_ofs()"

This is fixed up in construct_reply_chain

7 years agos3: Fix the read&x offset within a chain
Volker Lendecke [Wed, 29 Feb 2012 22:44:36 +0000 (23:44 +0100)]
s3: Fix the read&x offset within a chain

7 years agos3: Remove chain_reply
Volker Lendecke [Tue, 28 Feb 2012 00:21:44 +0000 (01:21 +0100)]
s3: Remove chain_reply

<insert your favourite tombstone ascii art here>

7 years agos3: Replace chain_reply
Volker Lendecke [Mon, 27 Feb 2012 23:56:10 +0000 (00:56 +0100)]
s3: Replace chain_reply

This is a new implementation of our andx handling code. The old
code was quite involved in that it was called from within the reply_
handlers. This leads to pretty complex faking of smb_request
structures to give them the same environment, independent of whether
they are called directly or from within chain_reply.

chain_reply needs to go because it blocks really async handling of
chained requests.

7 years agos3: Add a new set of andx chain handling routines
Volker Lendecke [Mon, 27 Feb 2012 23:19:48 +0000 (00:19 +0100)]
s3: Add a new set of andx chain handling routines

This is in preparation of getting rid of chain_reply.

7 years agos3: Make sure the andX chains are ended correctly
Volker Lendecke [Sun, 26 Feb 2012 15:49:09 +0000 (16:49 +0100)]
s3: Make sure the andX chains are ended correctly

Normally chain_reply took care of this. This will go away soon.

7 years agos3: Fix a 64-bit warning
Volker Lendecke [Sat, 10 Mar 2012 12:45:41 +0000 (13:45 +0100)]
s3: Fix a 64-bit warning

Autobuild-User: Volker Lendecke <vl@samba.org>
Autobuild-Date: Sat Mar 10 15:27:09 CET 2012 on sn-devel-104

7 years agolib/tdb: fix tests for standalone out-of-tree.
Rusty Russell [Sat, 10 Mar 2012 03:38:48 +0000 (14:08 +1030)]
lib/tdb: fix tests for standalone out-of-tree.

Commit 4d58d0fa8f936e7efdc02e31c053d42a47b3e62a didn't work for lib/tdb
outside the build tree: symlink was pointing to wrong place.

Copy simplification from lib/tdb2, and fix the build farm.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Sat Mar 10 07:07:45 CET 2012 on sn-devel-104

7 years agosamba.tests.samba_tool.base: Avoid unnecessary call to testtools.matchers.Contains.
Jelmer Vernooij [Fri, 9 Mar 2012 23:23:40 +0000 (00:23 +0100)]
samba.tests.samba_tool.base: Avoid unnecessary call to testtools.matchers.Contains.

Autobuild-User: Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date: Sat Mar 10 05:27:51 CET 2012 on sn-devel-104

7 years agosamba.tests.samba_tool.user: Remove unused imports.
Jelmer Vernooij [Fri, 9 Mar 2012 23:23:18 +0000 (00:23 +0100)]
samba.tests.samba_tool.user: Remove unused imports.

7 years agoEnsure the right tsocket.h is included.
Jeremy Allison [Sat, 10 Mar 2012 01:08:36 +0000 (17:08 -0800)]
Ensure the right tsocket.h is included.

Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Sat Mar 10 03:47:04 CET 2012 on sn-devel-104

7 years agoFix up Christian Ambach's multi-credit code - the CreditCharge field is a 16-bit...
Jeremy Allison [Sat, 10 Mar 2012 00:47:21 +0000 (16:47 -0800)]
Fix up Christian Ambach's multi-credit code - the CreditCharge field is a 16-bit int read, not a 32-bit one.

7 years agos3:smb2_server validate message ids with largemtu
Christian Ambach [Tue, 28 Feb 2012 01:53:04 +0000 (17:53 -0800)]
s3:smb2_server validate message ids with largemtu

Signed-off-by: Jeremy Allison <jra@samba.org>
7 years agos3:smb2_server verify creditcharge
Christian Ambach [Tue, 28 Feb 2012 01:51:40 +0000 (17:51 -0800)]
s3:smb2_server verify creditcharge

for all requests that have max_???? checks, also do a check of the
creditcharge the client has sent (when using largemtu)

Signed-off-by: Jeremy Allison <jra@samba.org>
7 years agos3:smb2_server add function to verify creditcharge
Christian Ambach [Tue, 28 Feb 2012 01:49:12 +0000 (17:49 -0800)]
s3:smb2_server add function to verify creditcharge

Signed-off-by: Jeremy Allison <jra@samba.org>
7 years agos3:smb2_server: announce LargeMTU for SMB2.1
Christian Ambach [Mon, 27 Feb 2012 13:57:47 +0000 (05:57 -0800)]
s3:smb2_server: announce LargeMTU for SMB2.1

Signed-off-by: Jeremy Allison <jra@samba.org>
7 years agos3:smb2_server increase defaults for read/write/trans sizes to 1MB
Christian Ambach [Tue, 28 Feb 2012 05:33:13 +0000 (21:33 -0800)]
s3:smb2_server increase defaults for read/write/trans sizes to 1MB

Signed-off-by: Jeremy Allison <jra@samba.org>
7 years agos3:smb2_server: add supports_multicredit to sconn
Christian Ambach [Tue, 28 Feb 2012 01:45:09 +0000 (17:45 -0800)]
s3:smb2_server: add supports_multicredit to sconn

Signed-off-by: Jeremy Allison <jra@samba.org>
7 years agos3:smb2_server use the correct variables for max read/write
Christian Ambach [Mon, 27 Feb 2012 13:56:57 +0000 (05:56 -0800)]
s3:smb2_server use the correct variables for max read/write

Signed-off-by: Jeremy Allison <jra@samba.org>
7 years agoFix bug #8797 - Samba does not correctly handle DENY ACEs when privileges apply.
Richard Sharpe [Fri, 9 Mar 2012 22:54:38 +0000 (14:54 -0800)]
Fix bug #8797 - Samba does not correctly handle DENY ACEs when privileges apply.
Signed-off-by: Jeremy Allison <jra@samba.org>
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Sat Mar 10 01:33:45 CET 2012 on sn-devel-104

7 years agos3: asprintf->talloc_asprintf
Volker Lendecke [Fri, 9 Mar 2012 13:47:43 +0000 (14:47 +0100)]
s3: asprintf->talloc_asprintf

Autobuild-User: Volker Lendecke <vl@samba.org>
Autobuild-Date: Fri Mar  9 19:01:06 CET 2012 on sn-devel-104

7 years agos3: Replace a SMB_ASSERT with an error return
Volker Lendecke [Fri, 9 Mar 2012 13:45:21 +0000 (14:45 +0100)]
s3: Replace a SMB_ASSERT with an error return

7 years agos3: Remove some superfluous ()
Volker Lendecke [Fri, 9 Mar 2012 15:24:56 +0000 (16:24 +0100)]
s3: Remove some superfluous ()

7 years agos4 dns: Add support for PTR queries.
Kai Blin [Fri, 9 Mar 2012 09:43:27 +0000 (10:43 +0100)]
s4 dns: Add support for PTR queries.

Autobuild-User: Kai Blin <kai@samba.org>
Autobuild-Date: Fri Mar  9 12:27:38 CET 2012 on sn-devel-104

7 years agos4-librpc: Remove unused new_ev
Andrew Bartlett [Fri, 9 Mar 2012 04:30:00 +0000 (15:30 +1100)]
s4-librpc: Remove unused new_ev

Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Fri Mar  9 07:18:45 CET 2012 on sn-devel-104

7 years agoauth/ntlmssp: Remove reference to struct ntlmssp_state
Andrew Bartlett [Fri, 9 Mar 2012 03:29:55 +0000 (14:29 +1100)]
auth/ntlmssp: Remove reference to struct ntlmssp_state

7 years agoauth/ntlmssp: Remove gensec_security element from gensec_ntlmssp_state
Andrew Bartlett [Fri, 9 Mar 2012 03:28:46 +0000 (14:28 +1100)]
auth/ntlmssp: Remove gensec_security element from gensec_ntlmssp_state

This just means there is one less pointer to ensure we initialise.

Andrew Bartlett

7 years agoselftest: mark samba3.smb2.session tests as knownfail instead of skip
Stefan Metzmacher [Thu, 8 Mar 2012 13:22:15 +0000 (14:22 +0100)]
selftest: mark samba3.smb2.session tests as knownfail instead of skip

Pair-Programmed-With: Gregor Beck <gbeck@sernet.de>

metze

Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Fri Mar  9 02:34:38 CET 2012 on sn-devel-104

7 years agos4:torture/smb2: avoid hanging in smb2.session.reconnect against samba
Stefan Metzmacher [Thu, 8 Mar 2012 13:15:19 +0000 (14:15 +0100)]
s4:torture/smb2: avoid hanging in smb2.session.reconnect against samba

Now we fail the test directly instead of waiting for oplocks to timeout.

Pair-Programmed-With: Gregor Beck <gbeck@sernet.de>

metze

7 years agoauth/kerberos: Fall back to gsskrb5_get_subkey if we did not get the key type
Andrew Bartlett [Thu, 8 Mar 2012 05:16:12 +0000 (16:16 +1100)]
auth/kerberos: Fall back to gsskrb5_get_subkey if we did not get the key type

The key type OID is optional, but we require that information to determine if
we should use NEW_SPNEGO.

Andrew Bartlett

Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Thu Mar  8 11:53:57 CET 2012 on sn-devel-104

7 years agoauth/kerberos: Ensure we do not print invalid memory in failure case
Andrew Bartlett [Thu, 8 Mar 2012 05:15:09 +0000 (16:15 +1100)]
auth/kerberos: Ensure we do not print invalid memory in failure case

This codeblock may not have any set->elements, so we should not print them.  Copy&paste in the original code.

Andrew Bartlett

7 years agowintest: continue turning over VMs...
Andrew Bartlett [Thu, 8 Mar 2012 03:57:07 +0000 (14:57 +1100)]
wintest: continue turning over VMs...

7 years agodlz_bind9: Log Samba DEBUG() messages to the bind9 logs
Andrew Bartlett [Thu, 8 Mar 2012 01:21:56 +0000 (12:21 +1100)]
dlz_bind9: Log Samba DEBUG() messages to the bind9 logs

7 years agolib/util: Add a callback facility for debug messages
Andrew Bartlett [Thu, 8 Mar 2012 01:21:26 +0000 (12:21 +1100)]
lib/util: Add a callback facility for debug messages

This will allow dlz_bind9 to put log messages somewhere useful, which
may make it easier to debug.

Andrew Bartlett

7 years agos3-auth: Remove single-implementation plugin layer
Andrew Bartlett [Fri, 3 Feb 2012 10:58:44 +0000 (21:58 +1100)]
s3-auth: Remove single-implementation plugin layer

The ->get_ntlm_challenge and ->check_ntlm_password elements of struct auth_context
were only ever initialised to a single value.  Make it easier to follow by
just calling the function directly.

Andrew Bartlett

7 years agos3-auth: Follow auth_ntlmssp and use auth4_context for Session Setup
Andrew Bartlett [Fri, 3 Feb 2012 06:09:37 +0000 (17:09 +1100)]
s3-auth: Follow auth_ntlmssp and use auth4_context for Session Setup

This patch ensures consistency in behaviour between NTLMSSP and NTLM
session setup handlers.  By calling the same layer that auth_ntlmssp
calls, we can not only allow redirection of all authentication to the
AD DC, we ensure that map to guest and username map handling is
consistent, even in the file server alone.

Andrew Bartlett

7 years agoselftest: add more tests for different authentication codepaths
Andrew Bartlett [Thu, 8 Mar 2012 04:37:29 +0000 (15:37 +1100)]
selftest: add more tests for different authentication codepaths

7 years agoautobuild: Enable standalone tdb2 tests
Amitay Isaacs [Wed, 7 Mar 2012 02:32:22 +0000 (13:32 +1100)]
autobuild: Enable standalone tdb2 tests

Autobuild-User: Amitay Isaacs <amitay@samba.org>
Autobuild-Date: Thu Mar  8 09:32:24 CET 2012 on sn-devel-104

7 years agofailtest: don't assume FD_SETSIZE is maximum runtime fd.
Rusty Russell [Thu, 8 Mar 2012 03:44:22 +0000 (14:14 +1030)]
failtest: don't assume FD_SETSIZE is maximum runtime fd.

This breaks when rlimit is less.  Unfortunately, valgrind (32 bit x86,
3.7.0.SVN, Ubuntu) fails to set the file limit properly on the test:
reducing it to the obvious getrlimit/setrlimit/getrlimit works fine,
so leaving diagnostics for another day.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(Imported from CCAN commit a85a809bb17af6b6cf6fa31b300c6622f64ee700)

Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Thu Mar  8 06:30:48 CET 2012 on sn-devel-104

7 years agos4-selftest: create the st/provision if it didn't exists already
Matthieu Patou [Wed, 7 Mar 2012 07:22:54 +0000 (23:22 -0800)]
s4-selftest: create the st/provision if it didn't exists already

Autobuild-User: Matthieu Patou <mat@samba.org>
Autobuild-Date: Thu Mar  8 00:25:24 CET 2012 on sn-devel-104

7 years agos4-upgradeprovision: Add options to do a DB backup only and not to fix acls in sysvol
Matthieu Patou [Wed, 7 Mar 2012 05:44:45 +0000 (21:44 -0800)]
s4-upgradeprovision: Add options to do a DB backup only and not to fix acls in sysvol

7 years agoChange default protocol to SMB2_02.
Jeremy Allison [Wed, 7 Mar 2012 19:58:51 +0000 (11:58 -0800)]
Change default protocol to SMB2_02.

Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Wed Mar  7 22:41:21 CET 2012 on sn-devel-104

7 years agos3: piddir creation fix part 2.
Ira Cooper [Wed, 7 Mar 2012 01:58:37 +0000 (20:58 -0500)]
s3: piddir creation fix part 2.

Since the piddir got moved from the lockdir by default, the default piddir
wasn't getting created, stopping some configurations from running.

Signed-off-by: Jeremy Allison <jra@samba.org>
7 years agoaddns: Fix the Solaris/Illumos build.
Ira Cooper [Wed, 7 Mar 2012 00:22:46 +0000 (19:22 -0500)]
addns: Fix the Solaris/Illumos build.

uuid_t is not defined without including sys/uuid.h, configure+waf checks added.

Signed-off-by: Jeremy Allison <jra@samba.org>