-# Note that this file exists in Mandrake packaging cvs (as samba.spec)
-# and samba cvs (as packaging/Mandrake/samba2.spec.tmpl).
-# Keep in mind that any changes should take both locations into account
-# Considerable effort has gone into making this possible, so that only
-# one spec file is maintained, please don't break it.
-# It should be possible, without any changes to this file, to build
-# binary packages on most recent Mandrake releases:
-# 1)from official source releases, using 'cd packaging/Mandrake; sh makerpms.sh'
-# 2)from cvs snapshots, using 'cd packaging/Mandrake; sh makerpms-cvs.sh <ver>'
-# 3)using official source releases and updated Mandrake packaging, by
-# 'rpm -ba samba.spec'
-# As such, any sources or patches used in a build from a samba release or
-# cvs should be submitted for inclusion in samba cvs.
-
-%define pkg_name samba
-%define ver 3.0.8
-%define drel 1
-%define subrel 1
-%define vscanver 0.3.5
-%define libsmbmajor 0
-%{?!mdkversion: %define mdkversion %(perl -pe '/(\d+)\.(\d)\.?(\d)?/; $_="$1$2".($3||0)' /etc/mandrake-release)}
-%define rel %(case `hostname` in (n?.mandrakesoft.com) echo %drel;;(*) echo $[%drel-1].%subrel.$[%mdkversion/10];;esac)mdk
-%{?_with_stable_on_cluster: %define rel %(echo $[%{drel}-1].%subrel.$[%{mdkversion}/10]mdk)}
-%{?_with_official: %define rel %drel}
-
-%{!?lib: %global lib lib}
-%{!?mklibname: %global mklibname(ds) %lib%{1}%{?2:%{2}}%{?3:_%{3}}%{-s:-static}%{-d:-devel}}
-
-%define libname %mklibname smbclient %libsmbmajor
-
-# Version and release replaced by samba-team at release from samba cvs
-%define pversion PVERSION
-%define prelease PRELEASE
-
-#Check to see if p(version|release) has been replaced (1 if replaced)
-%define have_pversion %(if [ "%pversion" = `echo "pversion" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi)
-%define have_prelease %(if [ "%prelease" = `echo "prelease" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi)
-
-%if %have_pversion
-%define source_ver %{pversion}
-# Don't abort for stupid reasons on builds from tarballs:
-%global _unpackaged_files_terminate_build 0
-%global _missing_doc_files_terminate_build 0
-%else
-%define source_ver %{ver}
-%endif
-
-# We might have a prerelease:
-%define have_pre %(echo %source_ver|awk '{p=0} /[a-z,A-Z][a-z,A-Z]/ {p=1} {print p}')
-%if %have_pre
-%define pre_ver %(perl -e '$name="%source_ver"; print ($name =~ /(.*?)[a-z]/);')
-%define pre_pre %(echo %source_ver|sed -e 's/%pre_ver//g')
-%endif
-
-# Check to see if we are running a build from a tarball release from samba.org
-# (%have_pversion) If so, disable vscan, unless explicitly requested
-# (--with vscan).
-%define build_vscan 1
-%if %have_pversion
-%define build_vscan 0
-%{?_with_vscan: %define build_vscan 1}
-%endif
-
-# We now do detection of the Mandrake release we are building on:
-%define build_mdk82 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.2 ];then echo 1; else echo 0; fi)
-%define build_mdk81 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.1 ];then echo 1; else echo 0; fi)
-%define build_mdk80 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.0 ];then echo 1; else echo 0; fi)
-%define build_mdk72 %(if [ `awk '{print $4}' /etc/mandrake-release` = 7.2 ];then echo 1; else echo 0; fi)
-%define build_non_default 0
-
-# Default options
-%define build_alternatives 0
-%define build_system 0
-%define build_acl 1
-%define build_winbind 1
-%define build_wins 1
-%define build_ldap 0
-%define build_ads 1
-%define build_scanners 0
-# CUPS supports functionality for 'printcap name = cups' (9.0 and later):
-%define build_cupspc 0
-# %_{pre,postun}_service are provided by rpm-helper in 9.0 and later
-%define have_rpmhelper 1
-
-# Set defaults for each version
-%if %mdkversion >= 1000
-%define build_system 1
-%endif
-
-%if %mdkversion >= 920
-%define build_alternatives 1
-%endif
-
-%if %mdkversion >= 910
-%define build_cupspc 1
-%endif
-
-%if %build_mdk82
-%define have_rpmhelper 0
-%endif
-
-%if %build_mdk81
-%define build_winbind 0
-%define build_wins 0
-%define have_rpmhelper 0
-%endif
-
-%if %build_mdk80
-%define build_acl 0
-%define build_winbind 0
-%define build_wins 0
-%define build_ads 0
-%define have_rpmhelper 1
-%endif
-
-%if %build_mdk72
-%define build_acl 0
-%define build_winbind 0
-%define build_wins 0
-%define build_ads 0
-%define have_rpmhelper 1
-%endif
-
-
-# Allow commandline option overrides (borrowed from Vince's qmail srpm):
-# To use it, do rpm [-ba|--rebuild] --with 'xxx'
-# Check if the rpm was built with the defaults, otherwise we inform the user
-%define build_non_default 0
-%{?_with_system: %global build_system 1}
-%{?_without_system: %global build_system 0}
-%{?_with_acl: %global build_acl 1}
-%{?_with_acl: %global build_non_default 1}
-%{?_without_acl: %global build_acl 0}
-%{?_without_acl: %global build_non_default 1}
-%{?_with_winbind: %global build_winbind 1}
-%{?_with_winbind: %global build_non_default 1}
-%{?_without_winbind: %global build_winbind 0}
-%{?_without_winbind: %global build_non_default 1}
-%{?_with_wins: %global build_wins 1}
-%{?_with_wins: %global build_non_default 1}
-%{?_without_wins: %global build_wins 0}
-%{?_without_wins: %global build_non_default 1}
-%{?_with_ldap: %global build_ldap 1}
-%{?_with_ldap: %global build_non_default 1}
-%{?_without_ldap: %global build_ldap 0}
-%{?_without_ldap: %global build_non_default 1}
-%{?_with_ads: %global build_ads 1}
-%{?_with_ads: %global build_non_default 1}
-%{?_without_ads: %global build_ads 0}
-%{?_without_ads: %global build_non_default 1}
-%{?_with_scanners: %global build_scanners 1}
-%{?_with_scanners: %global build_non_default 1}
-%{?_without_scanners: %global build_scanners 0}
-%{?_without_scanners: %global build_non_default 1}
-%{?_with_vscan: %global build_vscan 1}
-%{?_with_vscan: %global build_non_default 1}
-%{?_without_vscan: %global build_vscan 0}
-%{?_without_vscan: %global build_non_default 1}
-
-# As if that weren't enough, we're going to try building with antivirus
-# support as an option also
-%global build_clamav 0
-%global build_fprot 0
-%global build_fsav 0
-%global build_icap 0
-%global build_kaspersky 0
-%global build_mks 0
-%global build_nai 0
-%global build_openav 0
-%global build_sophos 0
-%global build_symantec 0
-%global build_trend 0
-%if %build_vscan
-# These we build by default
-%global build_clamav 1
-%global build_icap 1
-%endif
-%if %build_vscan && %build_scanners
-# These scanners are built if scanners are selected
-# symantec requires their library present and must be selected
-# individually
-%global build_fprot 1
-%global build_fsav 1
-%global build_kaspersky 1
-%global build_mks 1
-%global build_nai 1
-%global build_openav 1
-%global build_sophos 1
-%global build_trend 1
-%endif
-%if %build_vscan
-%{?_with_fprot: %{expand: %%global build_fprot 1}}
-%{?_with_kaspersky: %{expand: %%global build_kaspersky 1}}
-%{?_with_mks: %{expand: %%global build_mks 1}}
-%{?_with_openav: %{expand: %%global build_openav 1}}
-%{?_with_sophos: %{expand: %%global build_sophos 1}}
-#%{?_with_symantec: %{expand: %%global build_symantec 1}}
-%{?_with_trend: %{expand: %%global build_trend 1}}
-%global vscandir samba-vscan-%{vscanver}
-%endif
-%global vfsdir examples.bin/VFS
-
-#Standard texts for descriptions:
-%define message_bugzilla() %(echo -e -n "Please file bug reports for this package at Mandrake bugzilla \\n(http://qa.mandrakesoft.com) under the product name %{1}")
-%define message_system %(echo -e -n "NOTE: These packages of samba-%{version}, are provided, parallel installable\\nwith samba-2.2.x, to allow easy migration from samba-2.2.x to samba-%{version},\\nbut are not officially supported")
-
-#check gcc version to disable some optimisations on gcc-3.3.1
-%define gcc331 %(gcc -dumpversion|awk '{if ($1>3.3) print 1; else print 0}')
-
-#Define sets of binaries that we can use in globs and loops:
-%global commonbin net,ntlm_auth,rpcclient,smbcacls,smbcquotas,smbpasswd,smbtree,testparm,testprns
-
-%global serverbin editreg,pdbedit,profiles,smbcontrol,smbstatus,tdbbackup,tdbdump
-%global serversbin nmbd,samba,smbd,mkntpwd
-
-%global clientbin findsmb,nmblookup,smbclient,smbmnt,smbmount,smbprint,smbspool,smbtar,smbumount,smbget
-%global client_bin mount.cifs
-%global client_sbin mount.smb,mount.smbfs
-
-%global testbin debug2html,smbtorture,msgtest,masktest,locktest,locktest2,nsstest,vfstest
-
-%ifarch alpha
-%define build_expsam xml
-%else
-%define build_expsam mysql,xml,pgsql
-%endif
-
-#Workaround missing macros in 8.x:
-%{!?perl_vendorlib: %{expand: %%global perl_vendorlib %{perl_sitearch}/../}}
-
-# Determine whether this is the system samba or not.
-%if %build_system
-%define samba_major %{nil}
-%else
-%define samba_major 3
-%endif
-# alternatives_major is %{nil} if we aren't system and not using alternatives
-%if !%build_system || %build_alternatives
-%define alternative_major 3
-%else
-%define alternative_major %{nil}
-%endif
-
-Summary: Samba SMB server.
-Name: %{pkg_name}%{samba_major}
-
-%if %have_pre
-Version: %{pre_ver}
-%else
-Version: %{source_ver}
-%endif
-
-%if %have_prelease && !%have_pre
-Release: 0.%{prelease}.%{rel}
-%endif
-%if %have_prelease && %have_pre
-Release: 0.%{pre_pre}.%{rel}
-%endif
-%if !%have_prelease && !%have_pre
-Release: %{rel}
-%endif
-%if !%have_prelease && %have_pre
-Release: 0.%{pre_pre}.%{rel}
-%endif
-
-License: GPL
-Group: System/Servers
-Source: ftp://samba.org/pub/samba/samba-%{source_ver}.tar.bz2
-URL: http://www.samba.org
-Source1: samba.log
-Source3: samba.xinetd
-Source4: swat_48.png.bz2
-Source5: swat_32.png.bz2
-Source6: swat_16.png.bz2
-Source7: README.%{name}-mandrake-rpm
-%if %build_vscan
-Source8: samba-vscan-%{vscanver}.tar.bz2
-%endif
-%if %build_vscan && %mdkversion >= 920
-BuildRequires: file-devel
-%endif
-Source10: samba-print-pdf.sh.bz2
-Source11: smb-migrate.bz2
-Patch1: smbw.patch.bz2
-Patch4: samba-3.0-smbmount-sbin.patch.bz2
-Patch5: samba-3.0.2a-smbldap-config.patch.bz2
-%if !%have_pversion
-# Version specific patches: current version
-Patch7: samba-3.0.5-lib64.patch.bz2
-Patch9: samba-3.0.6-smbmount-unixext.patch.bz2
-Patch11: samba-3.0.7-mandrake-packaging.patch.bz2
-%else
-# Version specific patches: upcoming version
-Patch8: samba-3.0.6-revert-libsmbclient-move.patch.bz2
-%endif
-# Limbo patches (applied to prereleases, but not preleases, ie destined for
-# samba CVS)
-%if %have_pversion && %have_pre
-%endif
-Requires: pam >= 0.64, samba-common = %{version}
-BuildRequires: pam-devel readline-devel libncurses-devel popt-devel
-BuildRequires: libxml2-devel postgresql-devel
-%ifnarch alpha
-BuildRequires: mysql-devel
-%endif
-%if %build_acl
-BuildRequires: libacl-devel
-%endif
-%if %build_mdk72
-BuildRequires: cups-devel
-%else
-BuildRequires: libcups-devel
-%endif
-BuildRequires: libldap-devel
-%if %build_ads
-BuildRequires: libldap-devel krb5-devel
-%endif
-BuildRoot: %{_tmppath}/%{name}-%{version}-root
-Prefix: /usr
-Prereq: /sbin/chkconfig /bin/mktemp /usr/bin/killall
-Prereq: fileutils sed /bin/grep
-
-%description
-Samba provides an SMB server which can be used to provide
-network services to SMB (sometimes called "Lan Manager")
-clients, including various versions of MS Windows, OS/2,
-and other Linux machines. Samba also provides some SMB
-clients, which complement the built-in SMB filesystem
-in Linux. Samba uses NetBIOS over TCP/IP (NetBT) protocols
-and does NOT need NetBEUI (Microsoft Raw NetBIOS frame)
-protocol.
-
-Samba-3.0 features working NT Domain Control capability and
-includes the SWAT (Samba Web Administration Tool) that
-allows samba's smb.conf file to be remotely managed using your
-favourite web browser. For the time being this is being
-enabled on TCP port 901 via xinetd. SWAT is now included in
-it's own subpackage, samba-swat.
-
-Please refer to the WHATSNEW.txt document for fixup information.
-This binary release includes encrypted password support.
-
-Please read the smb.conf file and ENCRYPTION.txt in the
-docs directory for implementation details.
-%if %have_pversion
-%message_bugzilla samba3
-%endif
-%if !%build_system
-%message_system
-%endif
-%if %build_non_default
-WARNING: This RPM was built with command-line options. Please
-see README.%{name}-mandrake-rpm in the documentation for
-more information.
-%endif
-
-%package server
-URL: http://www.samba.org
-Summary: Samba (SMB) server programs.
-Requires: %{name}-common = %{version}
-%if %have_rpmhelper
-PreReq: rpm-helper
-%endif
-Group: Networking/Other
-%if %build_system
-Provides: samba
-Obsoletes: samba
-Provides: samba-server-ldap
-Obsoletes: samba-server-ldap
-Provides: samba3-server
-Obsoletes: samba3-server
-%else
-#Provides: samba-server
-%endif
-
-%description server
-Samba-server provides a SMB server which can be used to provide
-network services to SMB (sometimes called "Lan Manager")
-clients. Samba uses NetBIOS over TCP/IP (NetBT) protocols
-and does NOT need NetBEUI (Microsoft Raw NetBIOS frame)
-protocol.
-
-Samba-3.0 features working NT Domain Control capability and
-includes the SWAT (Samba Web Administration Tool) that
-allows samba's smb.conf file to be remotely managed using your
-favourite web browser. For the time being this is being
-enabled on TCP port 901 via xinetd. SWAT is now included in
-it's own subpackage, samba-swat.
-
-Please refer to the WHATSNEW.txt document for fixup information.
-This binary release includes encrypted password support.
-
-Please read the smb.conf file and ENCRYPTION.txt in the
-docs directory for implementation details.
-%if %have_pversion
-%message_bugzilla samba3-server
-%endif
-%if !%build_system
-%message_system
-%endif
-
-%package client
-URL: http://www.samba.org
-Summary: Samba (SMB) client programs.
-Group: Networking/Other
-Requires: %{name}-common = %{version}
-%if %build_alternatives
-#Conflicts: samba-client < 2.2.8a-9mdk
-%endif
-%if %build_system
-Provides: samba3-client
-Obsoletes: samba3-client
-Obsoletes: smbfs
-%else
-#Provides: samba-client
-%endif
-%if !%build_system && %build_alternatives
-Provides: samba-client
-%endif
-
-%description client
-Samba-client provides some SMB clients, which complement the built-in
-SMB filesystem in Linux. These allow the accessing of SMB shares, and
-printing to SMB printers.
-%if %have_pversion
-%message_bugzilla samba3-client
-%endif
-%if !%build_system
-%message_system
-%endif
-
-%package common
-URL: http://www.samba.org
-Summary: Files used by both Samba servers and clients.
-Group: System/Servers
-%if %build_system
-Provides: samba-common-ldap
-Obsoletes: samba-common-ldap
-Provides: samba3-common
-Obsoletes: samba3-common
-%else
-#Provides: samba-common
-%endif
-
-%description common
-Samba-common provides files necessary for both the server and client
-packages of Samba.
-%if %have_pversion
-%message_bugzilla samba3-common
-%endif
-%if !%build_system
-%message_system
-%endif
-
-%package doc
-URL: http://www.samba.org
-Summary: Documentation for Samba servers and clients.
-Group: System/Servers
-Requires: %{name}-common = %{version}
-%if %build_system
-Obsoletes: samba3-doc
-Provides: samba3-doc
-%else
-#Provides: samba-doc
-%endif
-
-%description doc
-Samba-doc provides documentation files for both the server and client
-packages of Samba.
-%if %have_pversion
-%message_bugzilla samba3-doc
-%endif
-%if !%build_system
-%message_system
-%endif
-
-%package swat
-URL: http://www.samba.org
-Summary: The Samba Web Administration Tool.
-Requires: %{name}-server = %{version}
-Requires: xinetd
-Group: System/Servers
-%if %build_system
-Provides: samba-swat-ldap
-Obsoletes: samba-swat-ldap
-Provides: samba3-swat
-Obsoletes: samba3-swat
-%else
-#Provides: samba-swat
-%endif
-
-%description swat
-SWAT (the Samba Web Administration Tool) allows samba's smb.conf file
-to be remotely managed using your favourite web browser. For the time
-being this is being enabled on TCP port 901 via xinetd. Note that
-SWAT does not use SSL encryption, nor does it preserve comments in
-your smb.conf file. Webmin uses SSL encryption by default, and
-preserves comments in configuration files, even if it does not display
-them, and is therefore the preferred method for remotely managing
-Samba.
-%if %have_pversion
-%message_bugzilla samba3-swat
-%endif
-%if !%build_system
-%message_system
-%endif
-
-%if %build_winbind
-%package winbind
-URL: http://www.samba.org
-Summary: Samba-winbind daemon, utilities and documentation
-Group: System/Servers
-Requires: %{name}-common = %{version}
-%endif
-%if %build_winbind && !%build_system
-Conflicts: samba-winbind
-%endif
-%if %build_winbind
-%description winbind
-Provides the winbind daemon and testing tools to allow authentication
-and group/user enumeration from a Windows or Samba domain controller.
-%endif
-%if %have_pversion
-%message_bugzilla samba3-winbind
-%endif
-%if !%build_system
-%message_system
-%endif
-
-%if %build_wins
-%package -n nss_wins%{samba_major}
-URL: http://www.samba.org
-Summary: Name Service Switch service for WINS
-Group: System/Servers
-Requires: %{name}-common = %{version}
-PreReq: glibc
-%endif
-%if %build_wins && !%build_system
-Conflicts: nss_wins
-%endif
-%if %build_wins
-%description -n nss_wins%{samba_major}
-Provides the libnss_wins shared library which resolves NetBIOS names to
-IP addresses.
-%endif
-%if %have_pversion
-%message_bugzilla nss_wins3
-%endif
-%if !%build_system
-%message_system
-%endif
-
-%if %{?_with_test:1}%{!?_with_test:0}
-%package test
-URL: http://www.samba.org
-Summary: Debugging and benchmarking tools for samba
-Group: System/Servers
-Requires: %{name}-common = %{version}
-%endif
-%if %build_system && %{?_with_test:1}%{!?_with_test:0}
-Provides: samba3-test samba3-debug
-Obsoletes: samba3-test samba3-debug
-%endif
-%if !%build_system && %{?_with_test:1}%{!?_with_test:0}
-Provides: samba-test samba3-debug
-Obsoletes: samba3-debug
-%endif
-%if %{?_with_test:1}%{!?_with_test:0}
-
-%description test
-This package provides tools for benchmarking samba, and debugging
-the correct operation of tools against smb servers.
-%endif
-
-%if %build_system
-%package -n %{libname}
-URL: http://www.samba.org
-Summary: SMB Client Library
-Group: System/Libraries
-Provides: libsmbclient
-
-%description -n %{libname}
-This package contains the SMB client library, part of the samba
-suite of networking software, allowing other software to access
-SMB shares.
-%endif
-%if %have_pversion && %build_system
-%message_bugzilla %{libname}
-%endif
-
-%if %build_system
-%package -n %{libname}-devel
-URL: http://www.samba.org
-Summary: SMB Client Library Development files
-Group: Development/C
-Provides: libsmbclient-devel
-Requires: %{libname} = %{version}-%{release}
-
-%description -n %{libname}-devel
-This package contains the development files for the SMB client
-library, part of the samba suite of networking software, allowing
-the development of other software to access SMB shares.
-%endif
-%if %have_pversion && %build_system
-%message_bugzilla %{libname}-devel
-%endif
-
-%if %build_system
-%package -n %{libname}-static-devel
-URL: http://www.samba.org
-Summary: SMB Client Static Library Development files
-Group: System/Libraries
-Provides: libsmbclient-static-devel = %{version}-%{release}
-Requires: %{libname}-devel = %{version}-%{release}
-
-%description -n %{libname}-static-devel
-This package contains the static development files for the SMB
-client library, part of the samba suite of networking software,
-allowing the development of other software to access SMB shares.
-%endif
-%if %have_pversion && %build_system
-%message_bugzilla %{libname}-devel
-%endif
-
-#%package passdb-ldap
-#URL: http://www.samba.org
-#Summary: Samba password database plugin for LDAP
-#Group: System/Libraries
-#
-#%description passdb-ldap
-#The passdb-ldap package for samba provides a password database
-#backend allowing samba to store account details in an LDAP
-#database
-#_if %have_pversion
-#_message_bugzilla samba3-passdb-ldap
-#_endif
-#_if !%build_system
-#_message_system
-#_endif
-
-%ifnarch alpha
-%package passdb-mysql
-URL: http://www.samba.org
-Summary: Samba password database plugin for MySQL
-Group: System/Libraries
-Requires: %{name}-server = %{version}-%{release}
-%endif
-%ifnarch alpha && %build_system
-Obsoletes: samba3-passdb-mysql
-Provides: samba3-passdb-mysql
-%endif
-%ifnarch alpha
-
-%description passdb-mysql
-The passdb-mysql package for samba provides a password database
-backend allowing samba to store account details in a MySQL
-database
-%endif
-
-#does postgresql build on alpha?
-#ifnarch alpha
-%package passdb-pgsql
-URL: http://www.samba.org
-Summary: Samba password database plugin for PostgreSQL
-Group: System/Libraries
-Requires: %{name}-server = %{version}-%{release}
-#endif
-#ifnarch alpha && %build_system
-%if %build_system
-Obsoletes: samba3-passdb-pgsql
-Provides: samba3-passdb-pgsql
-%endif
-#ifnarch alpha
-
-%description passdb-pgsql
-The passdb-pgsql package for samba provides a password database
-backend allowing samba to store account details in a PostgreSQL
-database
-#endif
-
-%package passdb-xml
-URL: http://www.samba.org
-Summary: Samba password database plugin for XML files
-Group: System/Libraries
-Requires: %{name}-server = %{version}-%{release}
-%if %build_system
-Obsoletes: samba3-passdb-xml
-Provides: samba3-passdb-xml
-%endif
-
-%description passdb-xml
-The passdb-xml package for samba provides a password database
-backend allowing samba to store account details in XML files.
-%if %have_pversion
-%message_bugzilla samba3-passdb-xml
-%endif
-%if !%build_system
-%message_system
-%endif
-
-#Antivirus packages:
-%if %build_clamav
-%package vscan-clamav
-Summary: On-access virus scanning for samba using Clam Antivirus
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Provides: %{name}-vscan
-Requires: clamd
-%description vscan-clamav
-A vfs-module for samba to implement on-access scanning using the
-Clam antivirus scanner daemon.
-%endif
-
-%if %build_fprot
-%package vscan-fprot
-Summary: On-access virus scanning for samba using FPROT
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Provides: %{name}-vscan
-%description vscan-fprot
-A vfs-module for samba to implement on-access scanning using the
-FPROT antivirus software (which must be installed to use this).
-%endif
-
-%if %build_fsav
-%package vscan-fsecure
-Summary: On-access virus scanning for samba using F-Secure
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Provides: %{name}-vscan
-%description vscan-fsecure
-A vfs-module for samba to implement on-access scanning using the
-F-Secure antivirus software (which must be installed to use this).
-%endif
-
-%if %build_icap
-%package vscan-icap
-Summary: On-access virus scanning for samba using Clam Antivirus
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Provides: %{name}-icap
-%description vscan-icap
-A vfs-module for samba to implement on-access scanning using
-ICAP-capable antivirus software.
-%endif
-
-%if %build_kaspersky
-%package vscan-kaspersky
-Summary: On-access virus scanning for samba using Kaspersky
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Provides: %{name}-vscan
-%description vscan-kaspersky
-A vfs-module for samba to implement on-access scanning using the
-Kaspersky antivirus software (which must be installed to use this).
-%endif
-
-%if %build_mks
-%package vscan-mks
-Summary: On-access virus scanning for samba using MKS
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Provides: %{name}-vscan
-%description vscan-mks
-A vfs-module for samba to implement on-access scanning using the
-MKS antivirus software (which must be installed to use this).
-%endif
-
-%if %build_nai
-%package vscan-nai
-Summary: On-access virus scanning for samba using NAI McAfee
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Provides: %{name}-vscan
-%description vscan-nai
-A vfs-module for samba to implement on-access scanning using the
-NAI McAfee antivirus software (which must be installed to use this).
-%endif
-
-%if %build_openav
-%package vscan-openav
-Summary: On-access virus scanning for samba using OpenAntivirus
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Provides: %{name}-vscan
-%description vscan-openav
-A vfs-module for samba to implement on-access scanning using the
-OpenAntivirus antivirus software (which must be installed to use this).
-%endif
-
-%if %build_sophos
-%package vscan-sophos
-Summary: On-access virus scanning for samba using Sophos
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Provides: %{name}-vscan
-%description vscan-sophos
-A vfs-module for samba to implement on-access scanning using the
-Sophos antivirus software (which must be installed to use this).
-%endif
-
-%if %build_symantec
-%package vscan-symantec
-Summary: On-access virus scanning for samba using Symantec
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Provides: %{name}-vscan
-Autoreq: 0
-%description vscan-symantec
-A vfs-module for samba to implement on-access scanning using the
-Symantec antivirus software (which must be installed to use this).
-%endif
-
-
-%if %build_trend
-%package vscan-trend
-Summary: On-access virus scanning for samba using Trend
-Group: System/Servers
-Requires: %{name}-server = %{version}
-Provides: %{name}-vscan
-%description vscan-trend
-A vfs-module for samba to implement on-access scanning using the
-Trend antivirus software (which must be installed to use this).
-%endif
-
-%prep
-
-# Allow users to query build options with --with options:
-#%define opt_status(%1) %(echo %{1})
-%if %{?_with_options:1}%{!?_with_options:0}
-%define opt_status(%{1}) %(if [ %{1} -eq 1 ];then echo enabled;else echo disabled;fi)
-#exit 1
-%{error: }
-%{error:Build options available are:}
-%{error:--with[out] system Build as the system samba package [or as samba3]}
-%{error:--with[out] acl Build with support for file ACLs - %opt_status %build_acl}
-%{error:--with[out] winbind Build with Winbind support - %opt_status %build_winbind}
-%{error:--with[out] wins Build with WINS name resolution support - %opt_status %build_wins}
-%{error:--with[out] ldap Build with legacy (samba2) LDAP support - %opt_status %build_ldap}
-%{error:--with[out] ads Build with Active Directory support - %opt_status %build_ads}
-%{error:--with[out] scanners Enable on-access virus scanners - %opt_status %build_scanners}
-%{error: }
-%else
-%{error: }
-%{error: This rpm has build options available, use --with options to see them}
-%{error: }
-%endif
-
-%if %{?_with_options:1}%{!?_with_options:0} && %build_scanners
-#{error:--with scanners enables the following:%{?build_clamav:clamav,}%{?build_icap:icap,}%{?build_fprot:fprot,}%{?build_mks:mks,}%{?build_openav:openav,}%{?build_sophos:sophos,}%{?build_symantec:symantec,}%{?build_trend:trend}}
-%{error:--with scanners enables the following: clamav,icap,fprot,fsav,mks,nai,openav,sophos,trend}
-%{error: }
-%{error:To enable others (requires development libraries for the scanner):}
-%{error:--with symantec Enable on-access scanning with Symantec - %opt_status %build_symantec}
-%{error: }
-%endif
-
-%if %{?_with_options:1}%{!?_with_options:0}
-clear
-exit 1
-%endif
-
-
-%if %build_non_default
-RPM_EXTRA_OPTIONS="\
-%{?_with_system: --with system}\
-%{?_without_system: --without system}\
-%{?_with_acl: --with acl}\
-%{?_without_acl: --without acl}\
-%{?_with_winbind: --with winbind}\
-%{?_without_winbind: --without winbind}\
-%{?_with_wins: --with wins}\
-%{?_without_wins: --without wins}\
-%{?_with_ldap: --with ldap}\
-%{?_without_ldap: --without ldap}\
-%{?_with_ads: --with ads}\
-%{?_without_ads: --without ads}\
-%{?_with_scanners: --with scanners}\
-%{?_without_scanners: --without scanners}\
-"
-echo "Building a non-default rpm with the following command-line arguments:"
-echo "$RPM_EXTRA_OPTIONS"
-echo "This rpm was built with non-default options, thus, to build ">%{SOURCE7}
-echo "an identical rpm, you need to supply the following options">>%{SOURCE7}
-echo "at build time: $RPM_EXTRA_OPTIONS">>%{SOURCE7}
-echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7}
-%else
-echo "This rpm was built with default options">%{SOURCE7}
-echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7}
-%endif
-
-%if %build_vscan
-%setup -q -a 8 -n %{pkg_name}-%{source_ver}
-%else
-%setup -q -n %{pkg_name}-%{source_ver}
-%endif
-#%patch111 -p1
-%patch1 -p1 -b .smbw
-%patch4 -p1 -b .sbin
-%patch5 -p1
-# Version specific patches: current version
-%if !%have_pversion
-echo "Applying patches for current version: %{ver}"
-#%patch7 -p1 -b .lib64
-%patch9 -p1 -b .unixext
-#%patch10 -p1 -b .rpcclient-libs
-%patch11 -p1 -b .mdk
-%else
-# Version specific patches: upcoming version
-echo "Applying patches for new versions: %{pversion}"
-%patch8 -p1 -b .libsmbdir
-%endif
-
-# Limbo patches
-%if %have_pversion && %have_pre
-echo "Appling patches which should only be applied to prereleases"
-%endif
-
-# Fix quota compilation in glibc>2.3
-%if %mdkversion >= 910 && %mdkversion < 1000
-#grep "<linux/quota.h>" source/smbd/quotas.c >/dev/null && \
-perl -pi -e 's@<linux/quota.h>@<sys/quota.h>@' source/smbd/quotas.c
-%endif
-
-cp %{SOURCE7} .
-
-# Make a copy of examples so that we have a clean one for doc:
-cp -a examples examples.bin
-
-%if %build_vscan
-cp -a %{vscandir} %{vfsdir}
-#fix stupid directory names:
-#mv %{vfsdir}/%{vscandir}/openantivirus %{vfsdir}/%{vscandir}/oav
-# Inline replacement of config dir
-for av in clamav fprotd fsav icap kavp mksd mcdaemon oav sophos symantec trend
- do
- [ -e %{vfsdir}/%{vscandir}/*/vscan-$av.h ] && perl -pi -e \
- 's,^#define PARAMCONF "/etc/samba,#define PARAMCONF "/etc/%{name},' \
- %{vfsdir}/%{vscandir}/*/vscan-$av.h
-done
-#Inline edit vscan header:
-perl -pi -e 's/^# define SAMBA_VERSION_MAJOR 2/# define SAMBA_VERSION_MAJOR 3/g;s/# define SAMBA_VERSION_MINOR 2/# define SAMBA_VERSION_MINOR 0/g' %{vfsdir}/%{vscandir}/include/vscan-global.h
-%endif
-
-# Edit some files when not building system samba:
-%if !%build_system
-perl -pi -e 's/%{pkg_name}/%{name}/g' source/auth/pampass.c
-%endif
-
-#remove cvs internal files from docs:
-find docs examples -name '.cvsignore' -exec rm -f {} \;
-
-#make better doc trees:
-chmod -R a+rX examples docs *Manifest* README Roadmap COPYING
-mkdir -p clean-docs/samba-doc
-cp -a examples docs clean-docs/samba-doc
-mv -f clean-docs/samba-doc/examples/libsmbclient clean-docs/
-rm -Rf clean-docs/samba-doc/docs/{docbook,manpages,htmldocs,using_samba}
-ln -s %{_datadir}/swat%{samba_major}/using_samba/ clean-docs/samba-doc/docs/using_samba
-ln -sf %{_datadir}/swat%{samba_major}/help/ clean-docs/samba-doc/docs/htmldocs
-
-%build
-#%serverbuild
-(cd source
-CFLAGS=`echo "$RPM_OPT_FLAGS"|sed -e 's/-g//g'`
-%if %gcc331
-CFLAGS=`echo "$CFLAGS"|sed -e 's/-O2/-O/g'`
-%endif
-./autogen.sh
-# Don't use --with-fhs now, since it overrides libdir, it sets configdir,
-# lockdir,piddir logfilebase,privatedir and swatdir
-%configure --prefix=%{_prefix} \
- --sysconfdir=%{_sysconfdir}/%{name} \
- --localstatedir=/var \
- --with-libdir=%{_libdir}/%{name} \
- --with-privatedir=%{_sysconfdir}/%{name} \
- --with-lockdir=/var/cache/%{name} \
- --with-piddir=/var/run \
- --with-swatdir=%{_datadir}/swat%{samba_major} \
- --with-configdir=%{_sysconfdir}/%{name} \
- --with-logfilebase=/var/log/%{name} \
-%if !%build_ads
- --with-ads=no \
-%endif
- --with-automount \
- --with-smbmount \
- --with-pam \
- --with-pam_smbpass \
-%if %build_ldap
- --with-ldapsam \
-%endif
- --with-tdbsam \
- --with-syslog \
- --with-quotas \
- --with-utmp \
- --with-manpages-langs=en \
-%if %build_acl
- --with-acl-support \
-%endif
- --disable-mysqltest \
- --with-expsam=%build_expsam \
- --program-suffix=%{samba_major}
-# --with-shared-modules=pdb_ldap,idmap_ldap \
-# --with-manpages-langs=en,ja,pl \
-#_if !%build_system
-# --with-smbwrapper \
-#_endif
-# --with-nisplussam \
-# --with-fhs \
-
-#Fix the make file so we don't create debug information on 9.2
-%if %mdkversion == 920
-perl -pi -e 's/-g //g' Makefile
-%endif
-
-perl -pi -e 's|-Wl,-rpath,%{_libdir}||g;s|-Wl,-rpath -Wl,%{_libdir}||g' Makefile
-
-make proto_exists
-%make all libsmbclient smbfilter wins modules %{?_with_test: torture debug3html bin/log2pcap} bin/editreg bin/smbget client/mount.cifs
-
-)
-
-# Build mkntpasswd in examples/LDAP/ for smbldaptools
-make -C examples.bin/LDAP/smbldap-tools/mkntpwd
-
-%if %build_vscan
-echo -e "\n\nBuild antivirus VFS modules\n\n"
-pushd %{vfsdir}/%{vscandir}
-%configure
-#sed -i -e 's,openantivirus,oav,g' Makefile
-sed -i -e 's,^\(.*clamd socket name.*=\).*,\1 /var/lib/clamav/clamd.socket,g' clamav/vscan-clamav.conf
-make
-popd
-%endif
-
-# Build antivirus vfs objects
-%if %build_symantec
-echo "Building Symantec"
-make -C %{vfsdir}/%{vscandir} symantec
-%endif
-
-%install
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT
-
-#Ensure all docs are readable
-chmod a+r docs -R
-
-# Any entries here mean samba makefile is *really* broken:
-mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/%{name}
-mkdir -p $RPM_BUILD_ROOT/%{_datadir}
-mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs
-
-(cd source
-make DESTDIR=$RPM_BUILD_ROOT LIBDIR=%{_libdir}/%{name} MANDIR=%{_mandir} install installclientlib installmodules)
-
-install -m755 source/bin/{editreg,smbget} %{buildroot}/%{_bindir}
-
-#need to stay
-mkdir -p $RPM_BUILD_ROOT/{sbin,bin}
-mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/{logrotate.d,pam.d,xinetd.d}
-mkdir -p $RPM_BUILD_ROOT/%{_initrddir}
-mkdir -p $RPM_BUILD_ROOT/var/cache/%{name}
-mkdir -p $RPM_BUILD_ROOT/var/log/%{name}
-mkdir -p $RPM_BUILD_ROOT/var/run/%{name}
-mkdir -p $RPM_BUILD_ROOT/var/spool/%{name}
-mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/{netlogon,profiles,printers}
-mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/printers/{W32X86,WIN40,W32ALPHA,W32MIPS,W32PPC}
-mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/codepages/src
-mkdir -p $RPM_BUILD_ROOT/%{_lib}/security
-mkdir -p $RPM_BUILD_ROOT%{_libdir}
-mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts
-
-#smbwrapper and pam_winbind not handled by make, pam_smbpass.so doesn't build
-#install -m 755 source/bin/smbwrapper.so $RPM_BUILD_ROOT%{_libdir}/smbwrapper%{samba_major}.so
-install -m 755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/%{_lib}/security/pam_smbpass%{samba_major}.so
-install -m 755 source/nsswitch/pam_winbind.so $RPM_BUILD_ROOT/%{_lib}/security/pam_winbind.so
-
-install -m755 source/bin/libsmbclient.a $RPM_BUILD_ROOT%{_libdir}/libsmbclient.a
-pushd $RPM_BUILD_ROOT/%{_libdir}
-[ -f libsmbclient.so ] && mv -f libsmbclient.so libsmbclient.so.%{libsmbmajor}
-ln -sf libsmbclient.so.%{libsmbmajor} libsmbclient.so
-popd
-
-# smbsh forgotten
-#install -m 755 source/bin/smbsh $RPM_BUILD_ROOT%{_bindir}/
-
-%if %build_vscan
-%makeinstall_std -C %{vfsdir}/%{vscandir}
-install -m 644 %{vfsdir}/%{vscandir}/*/vscan-*.conf %{buildroot}/%{_sysconfdir}/%{name}
-%endif
-
-#libnss_* not handled by make:
-# Install the nsswitch library extension file
-for i in wins winbind; do
- install -m755 source/nsswitch/libnss_${i}.so $RPM_BUILD_ROOT/%{_lib}/libnss_${i}.so
-done
-# Make link for wins and winbind resolvers
-( cd $RPM_BUILD_ROOT/%{_lib}; ln -s libnss_wins.so libnss_wins.so.2; ln -s libnss_winbind.so libnss_winbind.so.2)
-
-%if %{?_with_test:1}%{!?_with_test:0}
-for i in {%{testbin}};do
- install -m755 source/bin/${i} $RPM_BUILD_ROOT/%{_bindir}/${i}%{samba_major}
-done
-%endif
-
-# Install other stuff
-
-# install -m644 examples/VFS/recycle/recycle.conf $RPM_BUILD_ROOT%{_sysconfdir}/samba/
- install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/smbusers
- install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT/%{_bindir}
- #install -m755 packaging/RedHat/smbadduser $RPM_BUILD_ROOT/usr/bin
- install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT/%{_bindir}
- install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_initrddir}/smb%{samba_major}
- install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_sbindir}/%{name}
- install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_initrddir}/winbind
-# install -m755 packaging/Mandrake/wrepld.init $RPM_BUILD_ROOT/%{_initrddir}/wrepld%{samba_major}
- install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_sbindir}/winbind
- install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/%{name}
- install -m644 packaging/Mandrake/system-auth-winbind.pamd $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/system-auth-winbind
-#
- install -m644 %{SOURCE1} $RPM_BUILD_ROOT/%{_sysconfdir}/logrotate.d/%{name}
-# install -m644 packaging/Mandrake/samba-slapd-include.conf $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/samba-slapd.include
-
-# Install smbldap-tools scripts:
-for i in examples/LDAP/smbldap-tools/*.pl; do
- install -m 750 $i $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
- ln -s %{_datadir}/%{name}/scripts/`basename $i` $RPM_BUILD_ROOT/%{_bindir}/`basename $i|sed -e 's/\.pl//g'`%{samba_major}
-done
-
-install -m 750 examples/LDAP/smbldap-tools/smbldap_tools.pm $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
-
-# The conf file
-install -m 640 examples/LDAP/smbldap-tools/smbldap_conf.pm $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}
-
-#Fix the smbldap-tools when not system samba:
-%if !%build_system
-perl -pi -e 's/^(use|package)(\s+)smbldap_(\w+);$/${1}${2}smbldap_${3}%{samba_major};/g' \
-%{buildroot}/%{_sysconfdir}/%{name}/smbldap_conf.pm \
-%{buildroot}/%{_datadir}/%{name}/scripts/smbldap*.p?
-perl -pi -e 's,/usr/local/sbin/mkntpwd,/usr/sbin/mkntpwd%{samba_major},g;s,553,421,g' %{buildroot}/%{_sysconfdir}/%{name}/smbldap_conf.pm
-perl -pi -e 's,\$smbldap_conf::SID,\$smbldap_conf3::SID,g' %{buildroot}/%{_datadir}/%{name}/scripts/smbldap*.p?
-%endif
-perl -pi -e 's,/usr/local/sbin/smbldap-passwd.pl,%{_datadir}/%{name}/scripts/smbldap-passwd.pl,g' %{buildroot}/%{_datadir}/%{name}/scripts/smbldap-useradd.pl
-
-# Link both smbldap*.pm into vendor-perl (any better ideas?)
-mkdir -p %{buildroot}/%{perl_vendorlib}
-ln -s %{_sysconfdir}/%{name}/smbldap_conf.pm $RPM_BUILD_ROOT/%{perl_vendorlib}/smbldap_conf%{samba_major}.pm
-ln -s %{_datadir}/%{name}/scripts/smbldap_tools.pm $RPM_BUILD_ROOT/%{perl_vendorlib}/smbldap_tools%{samba_major}.pm
-#mkntpwd
-install -m750 examples.bin/LDAP/smbldap-tools/mkntpwd/mkntpwd %{buildroot}/%{_sbindir}/mkntpwd%{samba_major}
-
-# Samba smbpasswd migration script:
-install -m755 examples/LDAP/convertSambaAccount $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
-
-# make a conf file for winbind from the default one:
- cat packaging/Mandrake/smb.conf|sed -e 's/^; winbind/ winbind/g;s/^; obey pam/ obey pam/g; s/^; printer admin = @"D/ printer admin = @"D/g;s/^; password server = \*/ password server = \*/g;s/^; template/ template/g; s/^ security = user/ security = domain/g' > packaging/Mandrake/smb-winbind.conf
- install -m644 packaging/Mandrake/smb-winbind.conf $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb-winbind.conf
-
-# Some inline fixes for smb.conf for non-winbind use
-install -m644 packaging/Mandrake/smb.conf $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf
-cat packaging/Mandrake/smb.conf | \
-sed -e 's/^; printer admin = @adm/ printer admin = @adm/g' >$RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf
-%if %build_cupspc
-perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf
-perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb-winbind.conf
-%endif
-
-#%if !%build_system
-# Fix script paths in smb.conf
-#perl -pi -e 's,%{_datadir}/samba,%{_datadir}/%{name},g' %{buildroot}/%{_sysconfdir}/%{name}/smb*.conf
-#%endif
-
-
-#install mount.cifs
-install -m755 source/client/mount.cifs %{buildroot}/bin/mount.cifs%{samba_major}
-
- echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/lmhosts
-
-# Link smbspool to CUPS (does not require installed CUPS)
-
- mkdir -p $RPM_BUILD_ROOT/%{_libdir}/cups/backend
- ln -s %{_bindir}/smbspool%{alternative_major} $RPM_BUILD_ROOT/%{_libdir}/cups/backend/smb%{alternative_major}
-
-# xinetd support
-
- mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d
- install -m644 %{SOURCE3} $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d/swat%{samba_major}
-
-# menu support
-
-mkdir -p $RPM_BUILD_ROOT%{_menudir}
-cat > $RPM_BUILD_ROOT%{_menudir}/%{name}-swat << EOF
-?package(%{name}-swat):\
-command="gnome-moz-remote http://localhost:901/" \
-needs="gnome" \
-icon="swat%{samba_major}.png" \
-section="Configuration/Networking" \
-title="Samba Configuration (SWAT)" \
-longtitle="The Swat Samba Administration Tool"
-?package(%{name}-swat):\
-command="sh -c '\$BROWSER http://localhost:901/'" \
-needs="x11" \
-icon="swat%{samba_major}.png" \
-section="Configuration/Networking" \
-title="Samba Configuration (SWAT)" \
-longtitle="The Swat Samba Administration Tool"
-EOF
-
-mkdir -p $RPM_BUILD_ROOT%{_liconsdir} $RPM_BUILD_ROOT%{_iconsdir} $RPM_BUILD_ROOT%{_miconsdir}
-
-bzcat %{SOURCE4} > $RPM_BUILD_ROOT%{_liconsdir}/swat%{samba_major}.png
-bzcat %{SOURCE5} > $RPM_BUILD_ROOT%{_iconsdir}/swat%{samba_major}.png
-bzcat %{SOURCE6} > $RPM_BUILD_ROOT%{_miconsdir}/swat%{samba_major}.png
-
-bzcat %{SOURCE10}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/print-pdf
-bzcat %{SOURCE11}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/smb-migrate
-
-# Fix configs when not building system samba:
-
-#Client binaries will have suffixes while we use alternatives, even
-# if we are system samba
-%if !%build_system || %build_alternatives
-for OLD in %{buildroot}/%{_bindir}/{%{clientbin}} %{buildroot}/bin/%{client_bin} %{buildroot}/%{_libdir}/cups/backend/smb
-do
- NEW=`echo ${OLD}%{alternative_major}`
- [ -e $OLD ] && mv -f $OLD $NEW
-done
-for OLD in %{buildroot}/%{_mandir}/man?/{%{clientbin}}* %{buildroot}/%{_mandir}/man?/%{client_bin}*
-do
- if [ -e $OLD ]
- then
- BASE=`perl -e '$_="'${OLD}'"; m,(%buildroot)(.*?)(\.[0-9]),;print "$1$2\n";'`
- EXT=`echo $OLD|sed -e 's,'${BASE}',,g'`
- NEW=`echo ${BASE}%{alternative_major}${EXT}`
- mv $OLD $NEW
- fi
-done
-%endif
-rm -f %{buildroot}/sbin/mount.smbfs
-# Link smbmount to /sbin/mount.smb and /sbin/mount.smbfs
-#I don't think it's possible for make to do this ...
-(cd $RPM_BUILD_ROOT/sbin
- ln -s ..%{_bindir}/smbmount%{alternative_major} mount.smb%{alternative_major}
- ln -s ..%{_bindir}/smbmount%{alternative_major} mount.smbfs%{alternative_major}
-)
-# Server/common binaries are versioned only if not system samba:
-%if !%build_system
-for OLD in %{buildroot}/%{_bindir}/{%{commonbin}} %{buildroot}/%{_bindir}/{%{serverbin}} %{buildroot}/%{_sbindir}/{%{serversbin},swat}
-do
- NEW=`echo ${OLD}%{alternative_major}`
- mv $OLD $NEW -f ||:
-done
-# And the man pages too:
-for OLD in %{buildroot}/%{_mandir}/man?/{%{commonbin},%{serverbin},%{serversbin},swat,{%testbin},smb.conf,lmhosts}*
-do
- if [ -e $OLD ]
- then
- BASE=`perl -e '$_="'${OLD}'"; m,(%buildroot)(.*?)(\.[0-9]),;print "$1$2\n";'`
-# BASE=`perl -e '$name="'${OLD}'"; print "",($name =~ /(.*?)\.[0-9]/), "\n";'`
- EXT=`echo $OLD|sed -e 's,'${BASE}',,g'`
- NEW=`echo ${BASE}%{samba_major}${EXT}`
- mv $OLD $NEW
- fi
-done
-# Replace paths in config files and init scripts:
-for i in smb ;do
- perl -pi -e 's,/subsys/'$i',/subsys/'$i'%{samba_major},g' $RPM_BUILD_ROOT/%{_initrddir}/${i}%{samba_major}
-done
-for i in %{_sysconfdir}/%{name}/smb.conf %{_initrddir}/smb%{samba_major} %{_sbindir}/%{name} %{_initrddir}/winbind /%{_sysconfdir}/logrotate.d/%{name} /%{_sysconfdir}/xinetd.d/swat%{samba_major} %{_initrddir}/wrepld%{samba_major}; do
- perl -pi -e 's,/%{pkg_name},/%{name},g; s,smbd,%{_sbindir}/smbd%{samba_major},g; s,nmbd,%{_sbindir}/nmbd%{samba_major},g; s,/usr/sbin/swat,%{_sbindir}/swat%{samba_major},g;s,wrepld,%{_sbindir}/wrepld%{samba_major},g' $RPM_BUILD_ROOT/$i;
-done
-# Fix xinetd file for swat:
-perl -pi -e 's,/usr/sbin,%{_sbindir},g' $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d/swat%{samba_major}
-%endif
-
-#Clean up unpackaged files:
-for i in %{_bindir}/pam_smbpass.so %{_bindir}/smbwrapper.so;do
-rm -f %{buildroot}/$i
-done
-
-# (sb) make a smb.conf.clean we can use for the merge, since an existing
-# smb.conf won't get overwritten
-cp $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf $RPM_BUILD_ROOT/%{_datadir}/%{name}/smb.conf.clean
-
-# (sb) leave a README.mdk.conf to explain what has been done
-cat << EOF > $RPM_BUILD_ROOT/%{_datadir}/%{name}/README.mdk.conf
-In order to facilitate upgrading an existing samba install, and merging
-previous configuration data with any new syntax used by samba3, a merge
-script has attempted to combine your local configuration data with the
-new conf file format. The merged data is in smb.conf, with comments like
-
- # *** merged from original smb.conf: ***
-
-near the additional entries. Any local shares should have been appended to
-smb.conf. A log of what took place should be in:
-
- /var/log/samba/smb-migrate.log
-
-A clean samba3 smb.conf is in /usr/share/samba, named smb.conf.clean.
-Your original conf should be /etc/samba/smb.conf.tomerge.
-
-The actual merge script is /usr/share/samba/scripts/smb-migrate.
-
-Questions/issues: sbenedict@mandrakesoft.com
-
-EOF
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%post server
-
-%_post_service smb%{samba_major}
-#%_post_service wrepld%{samba_major}
-
-# Add a unix group for samba machine accounts
-groupadd -frg 421 machines
-
-# Migrate tdb's from /var/lock/samba (taken from official samba spec file):
-for i in /var/lock/samba/*.tdb
-do
-if [ -f $i ]; then
- newname=`echo $i | sed -e's|var\/lock\/samba|var\/cache\/samba|'`
- echo "Moving $i to $newname"
- mv $i $newname
-fi
-done
-
-%post common
-# Basic migration script for pre-2.2.1 users,
-# since smb config moved from /etc to %{_sysconfdir}/samba
-
-# Let's create a proper %{_sysconfdir}/samba/smbpasswd file
-[ -f %{_sysconfdir}/%{name}/smbpasswd ] || {
- echo "Creating password file for samba..."
- touch %{_sysconfdir}/%{name}/smbpasswd
-}
-
-# And this too, in case we don't have smbd to create it for us
-[ -f /var/cache/%{name}/unexpected.tdb ] || {
- touch /var/cache/%{name}/unexpected.tdb
-}
-
-# Let's define the proper paths for config files
-perl -pi -e 's/(\/etc\/)(smb)/\1%{name}\/\2/' %{_sysconfdir}/%{name}/smb.conf
-
-# Fix the logrotate.d file from smb and nmb to smbd and nmbd
-if [ -f %{_sysconfdir}/logrotate.d/samba ]; then
- perl -pi -e 's/smb /smbd /' %{_sysconfdir}/logrotate.d/samba
- perl -pi -e 's/nmb /nmbd /' %{_sysconfdir}/logrotate.d/samba
-fi
-
-# And not loose our machine account SID
-[ -f %{_sysconfdir}/MACHINE.SID ] && mv -f %{_sysconfdir}/MACHINE.SID %{_sysconfdir}/%{name}/ ||:
-
-%triggerpostun common -- samba-common < 3.0.1-3mdk
-# (sb) merge any existing smb.conf with new syntax file
-if [ $1 = 2 ]; then
- # (sb) save existing smb.conf for merge
- echo "Upgrade: copy smb.conf to smb.conf.tomerge for merging..."
- cp -f %{_sysconfdir}/%{name}/smb.conf %{_sysconfdir}/%{name}/smb.conf.tomerge
- echo "Upgrade: merging previous smb.conf..."
- if [ -f %{_datadir}/%{name}/smb.conf.clean ]; then
- cp %{_datadir}/%{name}/smb.conf.clean %{_sysconfdir}/%{name}/smb.conf
- cp %{_datadir}/%{name}/README.mdk.conf %{_sysconfdir}/%{name}/
- %{_datadir}/%{name}/scripts/smb-migrate commit
- fi
-fi
-
-%postun common
-if [ -f %{_sysconfdir}/%{name}/README.mdk.conf ];then rm -f %{_sysconfdir}/%{name}/README.mdk.conf;fi
-
-%if %build_winbind
-%post winbind
-if [ $1 = 1 ]; then
- /sbin/chkconfig winbind on
- cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmsave
- cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmtemp
- for i in passwd group;do
- grep ^$i %{_sysconfdir}/nsswitch.conf |grep -v 'winbind' >/dev/null
- if [ $? = 0 ];then
- echo "Adding a winbind entry to the $i section of %{_sysconfdir}/nsswitch.conf"
- awk '/^'$i'/ {print $0 " winbind"};!/^'$i'/ {print}' %{_sysconfdir}/nsswitch.conf.rpmtemp >%{_sysconfdir}/nsswitch.conf;
- cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmtemp
- else
- echo "$i entry found in %{_sysconfdir}/nsswitch.conf"
- fi
- done
- if [ -f %{_sysconfdir}/nsswitch.conf.rpmtemp ];then rm -f %{_sysconfdir}/nsswitch.conf.rpmtemp;fi
-fi
-
-%preun winbind
-if [ $1 = 0 ]; then
- echo "Removing winbind entries from %{_sysconfdir}/nsswitch.conf"
- perl -pi -e 's/ winbind//' %{_sysconfdir}/nsswitch.conf
-
- /sbin/chkconfig winbind reset
-fi
-%endif %build_winbind
-
-%if %build_wins
-%post -n nss_wins%{samba_major}
-if [ $1 = 1 ]; then
- cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmsave
- grep '^hosts' %{_sysconfdir}/nsswitch.conf |grep -v 'wins' >/dev/null
- if [ $? = 0 ];then
- echo "Adding a wins entry to the hosts section of %{_sysconfdir}/nsswitch.conf"
- awk '/^hosts/ {print $0 " wins"};!/^hosts/ {print}' %{_sysconfdir}/nsswitch.conf.rpmsave >%{_sysconfdir}/nsswitch.conf;
- else
- echo "wins entry found in %{_sysconfdir}/nsswitch.conf"
- fi
-# else
-# echo "Upgrade, leaving nsswitch.conf intact"
-fi
-
-%preun -n nss_wins%{samba_major}
-if [ $1 = 0 ]; then
- echo "Removing wins entry from %{_sysconfdir}/nsswitch.conf"
- perl -pi -e 's/ wins//' %{_sysconfdir}/nsswitch.conf
-#else
-# echo "Leaving %{_sysconfdir}/nsswitch.conf intact"
-fi
-%endif %build_wins
-
-%preun server
-
-%_preun_service smb%{samba_major}
-#%_preun_service wrepld%{samba_major}
-
-if [ $1 = 0 ] ; then
-# /sbin/chkconfig --level 35 smb reset
-# Let's not loose /var/cache/samba
-
- if [ -d /var/cache/%{name} ]; then
- mv -f /var/cache/%{name} /var/cache/%{name}.BAK
- fi
-fi
-
-%post swat
-if [ -f /var/lock/subsys/xinetd ]; then
- service xinetd reload >/dev/null 2>&1 || :
-fi
-%update_menus
-
-%postun swat
-
-# Remove swat entry from xinetd
-if [ $1 = 0 -a -f %{_sysconfdir}/xinetd.conf ] ; then
-rm -f %{_sysconfdir}/xinetd.d/swat%{samba_major}
- service xinetd reload &>/dev/null || :
-fi
-
-if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
-
-%clean_menus
-
-%if %build_system
-%post -n %{libname} -p /sbin/ldconfig
-%postun -n %{libname} -p /sbin/ldconfig
-%endif
-
-%if %build_alternatives
-%post client
-
-update-alternatives --install %{_bindir}/smbclient smbclient \
-%{_bindir}/smbclient%{alternative_major} 10 \
-$(for i in {/bin/mount.cifs,/sbin/{%{client_sbin}},%{_bindir}/{%{clientbin}}};do
-j=`basename $i`
-[ "$j" = "smbclient" ] || \
-echo -n " --slave ${i} ${j} ${i}%{alternative_major}";done) \
---slave %{_libdir}/cups/backend/smb cups_smb %{_libdir}/cups/backend/smb%{alternative_major} || \
-update-alternatives --auto smbclient
-
-%preun client
-[ $1 = 0 ] && update-alternatives --remove smbclient %{_bindir}/smbclient%{alternative_major} ||:
-%endif
-
-%if %build_alternatives
-%triggerpostun client -- samba-client, samba2-client
-[ ! -e %{_bindir}/smbclient ] && update-alternatives --auto smbclient || :
-%endif
-
-%files server
-%defattr(-,root,root)
-%(for i in %{_sbindir}/{%{serversbin}}%{samba_major};do echo $i;done)
-%(for i in %{_bindir}/{%{serverbin}}%{samba_major};do echo $i;done)
-%attr(755,root,root) /%{_lib}/security/pam_smbpass*
-%dir %{_libdir}/%{name}/vfs
-%{_libdir}/%{name}/vfs/*.so
-%if %build_vscan
-%exclude %{_libdir}/%{name}/vfs/vscan*.so
-%endif
-%dir %{_libdir}/%{name}/pdb
-
-%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smbusers
-%attr(-,root,root) %config(noreplace) %{_initrddir}/smb%{samba_major}
-#%attr(-,root,root) %config(noreplace) %{_initrddir}/wrepld%{samba_major}
-%attr(-,root,root) %config(noreplace) %{_sysconfdir}/logrotate.d/%{name}
-%attr(-,root,root) %config(noreplace) %{_sysconfdir}/pam.d/%{name}
-#%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/samba-slapd.include
-%(for i in %{_mandir}/man?/{%{serverbin},%{serversbin}}%{samba_major}\.[0-9]*;do echo $i|grep -v mkntpwd;done)
-%attr(775,root,adm) %dir %{_localstatedir}/%{name}/netlogon
-%attr(755,root,root) %dir %{_localstatedir}/%{name}/profiles
-%attr(755,root,root) %dir %{_localstatedir}/%{name}/printers
-%attr(2775,root,adm) %dir %{_localstatedir}/%{name}/printers/*
-%attr(1777,root,root) %dir /var/spool/%{name}
-%dir %{_datadir}/%{name}
-%dir %{_datadir}/%{name}/scripts
-%attr(0755,root,root) %{_datadir}/%{name}/scripts/print-pdf
-%attr(0750,root,adm) %{_datadir}/%{name}/scripts/smbldap*.pl
-%attr(0750,root,adm) %{_bindir}/smbldap*
-%attr(0640,root,adm) %config(noreplace) %{_sysconfdir}/%{name}/smbldap_conf.pm
-%attr(0644,root,root) %{_datadir}/%{name}/scripts/smbldap_tools.pm
-%{perl_vendorlib}/*.pm
-#%attr(0700,root,root) %{_datadir}/%{name}/scripts/*port_smbpasswd.pl
-%attr(0755,root,root) %{_datadir}/%{name}/scripts/convertSambaAccount
-
-
-%files doc
-%defattr(-,root,root)
-%doc README COPYING Manifest Read-Manifest-Now
-%doc WHATSNEW.txt Roadmap
-%doc README.%{name}-mandrake-rpm
-%doc clean-docs/samba-doc/docs
-%doc clean-docs/samba-doc/examples
-%attr(-,root,root) %{_datadir}/swat%{samba_major}/using_samba/
-
-%files swat
-%defattr(-,root,root)
-%config(noreplace) %{_sysconfdir}/xinetd.d/swat%{samba_major}
-#%attr(-,root,root) /sbin/*
-%{_sbindir}/swat%{samba_major}
-%{_menudir}/%{name}-swat
-%{_miconsdir}/*.png
-%{_liconsdir}/*.png
-%{_iconsdir}/*.png
-%attr(-,root,root) %{_datadir}/swat%{samba_major}/help/
-%attr(-,root,root) %{_datadir}/swat%{samba_major}/images/
-%attr(-,root,root) %{_datadir}/swat%{samba_major}/include/
-%lang(ja) %{_datadir}/swat%{samba_major}/lang/ja
-%lang(tr) %{_datadir}/swat%{samba_major}/lang/tr
-%{_mandir}/man8/swat*.8*
-%lang(de) %{_libdir}/%{name}/de.msg
-%lang(en) %{_libdir}/%{name}/en.msg
-%lang(fr) %{_libdir}/%{name}/fr.msg
-%lang(it) %{_libdir}/%{name}/it.msg
-%lang(ja) %{_libdir}/%{name}/ja.msg
-%lang(nl) %{_libdir}/%{name}/nl.msg
-%lang(pl) %{_libdir}/%{name}/pl.msg
-%lang(tr) %{_libdir}/%{name}/tr.msg
-#%doc swat/README
-
-%files client
-%defattr(-,root,root)
-%(for i in %{_bindir}/{%{clientbin}}%{alternative_major};do echo $i;done)
-%(for i in %{_mandir}/man?/{%{clientbin}}%{alternative_major}.?.*;do echo $i|grep -v smbprint;done)
-#xclude %{_mandir}/man?/smbget*
-%{_mandir}/man5/smbgetrc%{alternative_major}.5*
-%ifnarch alpha
-%(for i in /sbin/{%{client_sbin}}%{alternative_major};do echo $i;done)
-%attr(4755,root,root) /bin/mount.cifs%{alternative_major}
-%attr(755,root,root) %{_bindir}/smbmount%{alternative_major}
-%attr(4755,root,root) %{_bindir}/smbumount%{alternative_major}
-%attr(4755,root,root) %{_bindir}/smbmnt%{alternative_major}
-%{_mandir}/man8/smbmnt*.8*
-%{_mandir}/man8/smbmount*.8*
-%{_mandir}/man8/smbumount*.8*
-%{_mandir}/man8/mount.cifs*.8*
-%else
-%exclude %{_bindir}/smb*m*nt%{samba_major}
-%exclude %{_mandir}/man8/smb*m*nt*.8*
-%endif
-# Link of smbspool to CUPS
-/%{_libdir}/cups/backend/smb%{alternative_major}
-
-%files common
-%defattr(-,root,root)
-%dir /var/cache/%{name}
-%dir /var/log/%{name}
-%dir /var/run/%{name}
-%(for i in %{_bindir}/{%{commonbin},tdbtool}%{samba_major};do echo $i;done)
-%(for i in %{_mandir}/man?/{%{commonbin}}%{samba_major}\.[0-9]*;do echo $i;done)
-#%{_libdir}/smbwrapper%{samba_major}.so
-%dir %{_libdir}/%{name}
-%{_libdir}/%{name}/*.dat
-%{_libdir}/%{name}/charset
-#%{_libdir}/%{name}/lowcase.dat
-#%{_libdir}/%{name}/valid.dat
-%dir %{_sysconfdir}/%{name}
-%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smb.conf
-%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smb-winbind.conf
-%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/lmhosts
-%dir %{_localstatedir}/%{name}
-%attr(-,root,root) %{_localstatedir}/%{name}/codepages
-%{_mandir}/man5/smb.conf*.5*
-%{_mandir}/man5/lmhosts*.5*
-#%{_mandir}/man7/Samba*.7*
-%dir %{_datadir}/swat%{samba_major}
-%attr(0750,root,adm) %{_datadir}/%{name}/scripts/smb-migrate
-%attr(-,root,root) %{_datadir}/%{name}/smb.conf.clean
-%attr(-,root,root) %{_datadir}/%{name}/README.mdk.conf
-
-%if %build_winbind
-%files winbind
-%defattr(-,root,root)
-%{_sbindir}/winbindd
-%{_sbindir}/winbind
-%{_bindir}/wbinfo
-%attr(755,root,root) /%{_lib}/security/pam_winbind*
-%attr(755,root,root) /%{_lib}/libnss_winbind*
-%attr(-,root,root) %config(noreplace) %{_initrddir}/winbind
-%attr(-,root,root) %config(noreplace) %{_sysconfdir}/pam.d/system-auth-winbind*
-%{_mandir}/man8/winbindd*.8*
-%{_mandir}/man1/wbinfo*.1*
-%endif
-
-%if %build_wins
-%files -n nss_wins%{samba_major}
-%defattr(-,root,root)
-%attr(755,root,root) /%{_lib}/libnss_wins.so*
-%endif
-
-%if %{?_with_test:1}%{!?_with_test:0}
-%files test
-%defattr(-,root,root)
-%(for i in %{_bindir}/{%{testbin}}%{samba_major};do echo $i;done)
-%{_mandir}/man1/vfstest%{samba_major}*.1*
-%exclude %{_mandir}/man1/log2pcap*.1*
-%else
-%exclude %{_mandir}/man1/vfstest%{samba_major}*.1*
-%exclude %{_mandir}/man1/log2pcap*.1*
-%endif
-
-%if %build_system
-%files -n %{libname}
-%defattr(-,root,root)
-%{_libdir}/libsmbclient.so.*
-%else
-%exclude %{_libdir}/libsmbclient.so.*
-%endif
-
-%if %build_system
-%files -n %{libname}-devel
-%defattr(-,root,root)
-%{_includedir}/*
-%{_libdir}/libsmbclient.so
-%doc clean-docs/libsmbclient/*
-%else
-%exclude %{_includedir}/*
-%exclude %{_libdir}/libsmbclient.so
-%endif
-
-%if %build_system
-%files -n %{libname}-static-devel
-%defattr(-,root,root)
-%{_libdir}/libsmbclient.a
-%else
-%exclude %{_libdir}/libsmbclient.a
-%endif
-
-#%files passdb-ldap
-#%defattr(-,root,root)
-#%{_libdir}/%{name}/*/*ldap.so
-
-%ifnarch alpha
-%files passdb-mysql
-%defattr(-,root,root)
-%{_libdir}/%{name}/pdb/*mysql.so
-%endif
-
-#ifnarch alpha
-%files passdb-pgsql
-%defattr(-,root,root)
-%{_libdir}/%{name}/pdb/*pgsql.so
-#endif
-
-%files passdb-xml
-%defattr(-,root,root)
-%{_libdir}/%{name}/pdb/*xml.so
-
-#Files for antivirus support:
-%if %build_clamav
-%files vscan-clamav
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-clamav.so
-%config(noreplace) %{_sysconfdir}/%{name}/vscan-clamav.conf
-%doc %{vfsdir}/%{vscandir}/INSTALL
-%endif
-%if !%build_clamav && %build_vscan
-%exclude %{_libdir}/%{name}/vfs/vscan-clamav.so
-%exclude %{_sysconfdir}/%{name}/vscan-clamav.conf
-%endif
-
-%if %build_fprot
-%files vscan-fprot
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-fprotd.so
-%config(noreplace) %{_sysconfdir}/%{name}/vscan-fprotd.conf
-%doc %{vfsdir}/%{vscandir}/INSTALL
-%endif
-%if !%build_fprot && %build_vscan
-%exclude %{_libdir}/%{name}/vfs/vscan-fprotd.so
-%exclude %{_sysconfdir}/%{name}/vscan-fprotd.conf
-%endif
-
-%if %build_fsav
-%files vscan-fsecure
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-fsav.so
-%config(noreplace) %{_sysconfdir}/%{name}/vscan-fsav.conf
-%doc %{vfsdir}/%{vscandir}/INSTALL
-%endif
-%if !%build_fsav && %build_vscan
-%exclude %{_libdir}/%{name}/vfs/vscan-fsav.so
-%exclude %{_sysconfdir}/%{name}/vscan-fsav.conf
-%endif
-
-%if %build_icap
-%files vscan-icap
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-icap.so
-%config(noreplace) %{_sysconfdir}/%{name}/vscan-icap.conf
-%doc %{vfsdir}/%{vscandir}/INSTALL
-%endif
-%if !%build_icap && %build_vscan
-%exclude %{_libdir}/%{name}/vfs/vscan-icap.so
-%exclude %{_sysconfdir}/%{name}/vscan-icap.conf
-%endif
-
-
-%if %build_kaspersky
-%files vscan-kaspersky
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-kavp.so
-%config(noreplace) %{_sysconfdir}/%{name}/vscan-kavp.conf
-%doc %{vfsdir}/%{vscandir}/INSTALL
-%endif
-%if !%build_kaspersky && %build_vscan
-%exclude %{_libdir}/%{name}/vfs/vscan-kavp.so
-%exclude %{_sysconfdir}/%{name}/vscan-kavp.conf
-%endif
-
-%if %build_mks
-%files vscan-mks
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-mksd.so
-%config(noreplace) %{_sysconfdir}/%{name}/vscan-mks*.conf
-%doc %{vfsdir}/%{vscandir}/INSTALL
-%endif
-%if !%build_mks && %build_vscan
-%exclude %{_libdir}/%{name}/vfs/vscan-mksd.so
-%exclude %{_sysconfdir}/%{name}/vscan-mks*.conf
-%endif
-
-%if %build_nai
-%files vscan-nai
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-mcdaemon.so
-%config(noreplace) %{_sysconfdir}/%{name}/vscan-mcdaemon.conf
-%doc %{vfsdir}/%{vscandir}/INSTALL
-%endif
-%if !%build_nai && %build_vscan
-%exclude %{_libdir}/%{name}/vfs/vscan-mcdaemon.so
-%exclude %{_sysconfdir}/%{name}/vscan-mcdaemon.conf
-%endif
-
-%if %build_openav
-%files vscan-openav
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-oav.so
-%config(noreplace) %{_sysconfdir}/%{name}/vscan-oav.conf
-%doc %{vfsdir}/%{vscandir}/INSTALL
-%endif
-%if !%build_openav && %build_vscan
-%exclude %{_libdir}/%{name}/vfs/vscan-oav.so
-%exclude %{_sysconfdir}/%{name}/vscan-oav.conf
-%endif
-
-%if %build_sophos
-%files vscan-sophos
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-sophos.so
-%config(noreplace) %{_sysconfdir}/%{name}/vscan-sophos.conf
-%doc %{vfsdir}/%{vscandir}/INSTALL
-%endif
-%if !%build_sophos && %build_vscan
-%exclude %{_libdir}/%{name}/vfs/vscan-sophos.so
-%exclude %{_sysconfdir}/%{name}/vscan-sophos.conf
-%endif
-
-%if %build_symantec
-%files vscan-symantec
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-symantec.so
-%config(noreplace) %{_sysconfdir}/%{name}/vscan-symantec.conf
-%doc %{vfsdir}/%{vscandir}/INSTALL
-%endif
-%if !%build_symantec && %build_vscan
-%exclude %{_sysconfdir}/%{name}/vscan-symantec.conf
-%endif
-
-%if %build_trend
-%files vscan-trend
-%defattr(-,root,root)
-%{_libdir}/%{name}/vfs/vscan-trend.so
-%config(noreplace) %{_sysconfdir}/%{name}/vscan-trend.conf
-%doc %{vfsdir}/%{vscandir}/INSTALL
-%endif
-%if !%build_trend && %build_vscan
-%exclude %{_libdir}/%{name}/vfs/vscan-trend.so
-%exclude %{_sysconfdir}/%{name}/vscan-trend.conf
-%endif
-
-%exclude %{_mandir}/man1/smbsh*.1*
-
-%changelog
-* Tue Nov 09 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.8-1mdk
-- 3.0.8
-- add tdbtool to common
-- fix doc permissions (broken in tarball)
-
-* Fri Nov 05 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.8-0.pre2.1mdk
-- 3.0.8pre2
-
-* Wed Oct 06 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.7-3mdk
-- drop patch 23 to ldap schema (patch in 3.0.6 was to bring schema up-to-date
- with pre-3.0.7 cvs) (#11960)
-- merge winbind init script fix into packaging patch
-- Don't set printcap name in pdf printer share (#11861)
-- allow official builds off-cluster (with _with_official macro defined)
-
-* Tue Sep 14 2004 Stew Benedict <sbenedict@mandrakesoft.com> 3.0.7-2mdk
-- fix typo in winbind init script that prevented stop
- (in 3.0.6 too, patch27)
-
-* Mon Sep 13 2004 Stew Benedict <sbenedict@mandrakesoft.com> 3.0.7-1mdk
-- 3.0.7 (drop patch10,21,22,24,25,26; rediff patch23)
-
-* Thu Sep 09 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.6-5mdk
-- patch for samba bug 1464
-- make release-depenent release tag more like security updates tags
-- sync smb.conf with drakwizard (which also fixes quoting of macros which
- can have spaces)
-- add example admin share
-- patches from Gerald Carter
-
-* Mon Aug 31 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.6-4mdk
-- Add Jerry's post-3.0.6 patches
-- fix bug 11088
-
-* Fri Aug 27 2004 Buchan Milne <bgmilne@linux-mandrake.com>3.0.6-3mdk
-- patch from Urban Widmark via Robert Sim (anthill bug 1086) to be able
- to diable unix extensions in smbmount (and via 'unix extensions' in smb.conf)
-- magic-devel only available on 9.2 and up
-- allow building for stable release on the chroots on the cluster
-- fix patch8
-- fix build on older releases
-
-* Fri Aug 20 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.6-2mdk
-- 3.0.6
--drop P6 (merged), P7 (broken for now)
--keep libsmbclient where it belongs (on x86 for now)
--implement mandrake version-specific release number
-
-* Thu Aug 12 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.5-2mdk
-- 3.0.5
-- fix pid file location (#10666)
-- merge amd64 fixes (P7)
-- make pdf printer work again, and other misc fixes to default config
-
-* Sun Jun 20 2004 Oden Eriksson <oeriksson@mandrakesoft.com> 3.0.5-0.pre1.3mdk
-- fix rpm group in libsmbclient0-devel (Goetz Waschk)
-
-* Sat Jun 19 2004 Oden Eriksson <oeriksson@mandrakesoft.com> 3.0.5-0.pre1.2mdk
-- fix deps
-
-* Wed May 26 2004 Buchan Milne <bgmilne@linux-mandrake.com>3.0.5-0.pre1.1mdk
-- fix building without scanners
-- 3.0.5pre1 (and drop patch from CVS)
-
-* Fri May 21 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.4-3mdk
-- re-work scanner support
-
-* Thu May 13 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.4-2mdk
-- 3.0.4
-- Patch for winbind (from samba bug 1315)
-
-* Thu Apr 29 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.2a-4mdk
-- Fix samba-vscan (0.3.5), add clamav and icap, and build scanners by default
-- Fix default vscan-clamav config and add sample config for homes share
-- Add pgsql passdb backend
-
-* Mon Mar 01 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.2a-3mdk
-- Fix default smbldap config
-- Don't clobber smb.conf backup for no reason
-
-* Mon Feb 16 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.2a-2mdk
-- 3.0.2a
-- Only update smb.conf in upgrade from <3.0.1-3mdk (via trigger) and update
- upgrade script (stew)
-
-* Mon Feb 09 2004 Buchan Milne <bgmilne@linux0mandrake.com> 3.0.2-2mdk
-- 3.0.2
-
-* Mon Feb 02 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.2-0.rc2.1mdk
-- 3.0.2rc2
-
-* Tue Jan 6 2004 Stew Benedict <sbenedict@mandrakesoft.com> 3.0.1-5mdk
-- update migrate script, feedback from Luca Berra
-
-* Mon Jan 5 2004 Stew Benedict <sbenedict@mandrakesoft.com> 3.0.1-4mdk
-- re-enable relaxed CFLAGS to fix broken smbmount, smbclient
-
-* Fri Jan 2 2004 Stew Benedict <sbenedict@mandrakesoft.com> 3.0.1-3mdk
-- add migrate script to merge existing smb.conf
-
-* Fri Dec 19 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-2mdk
-- 3.0.1 final
-
-* Thu Dec 11 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.rc2.2mdk
-- 3.0.1rc2
-
-* Sat Dec 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.rc1.2mdk
-- rc1
-- samba-vscan-0.3.4
-
-* Fri Dec 05 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.5mdk
-- Allow winbind to start if old winbind ranges are used (ease upgrades)
-
-* Tue Nov 18 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.4mdk
-- Fix build as system on 8.2 (and probably earlier)
-
-* Sun Nov 16 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.3mdk
-- Ensure printer drivers keep permissions by default (setgid and inherit perms)
-
-* Fri Nov 14 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.2mdk
-- 3.0.1pre3
-- Add support for Mandrake 10.0 (as system samba)
-- Fix alternatives triggers
-- Fix obsoletes
-
-* Mon Nov 10 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre2.2mdk
-- 3.0.1pre2
-- misc spec files (pointed out by Luca Olivetti)
-- Fix path to smbldap-passwd.pl
-- Only allow one copy of winbind and nss_wins
-- Add trigger for alternatives
-
-* Sun Oct 12 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre1.2mdk
-- 3.0.1pre1
-- remove buildroot patch (p3), fixed upstream
-
-* Thu Sep 25 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-2mdk
-- 3.0.0 final
-
-* Sat Sep 13 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc4.2mdk
-- rc4
-- Don't update alternatives in pre/post scripts when not using alternatives
-- Fix case of --with-system without alternatives
-- Final fixes to smbldap-tools for non-system case
-- Remove duplicate docs (really - 1 character typo ...)
-- Update configs (fix winbind init script, add example scripts in smb.conf)
-
-* Tue Sep 09 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc3.2mdk
-- rc3
-- Fix mount.smb{,fs} alternatives (spotted by Laurent Culioli)
-
-* Thu Sep 04 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc2.3mdk
-- Fix alternatives
-- Fix libname (can I blame guillomovitch's evil line-wrapping spec mode?)
-- Fix smbldap-tools package/use names when not system samba
-- Don't conflict samba3-client with samba-client for now so we can install it
-
-* Fri Aug 29 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc2.2mdk
-- rc2
-- Remove patches 100-102 (upstream)
-- Fix libname
-- Alternatavise client
-- Better solution to avoid rpath
-
-* Fri Aug 22 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc1.3mdk
-- Fix build with test package (p100), but not by default (too big)
-- Fix (p101) for SID resolution when member of samba-2.2.x domain
-- Fix libsmbclient packages (thanks Gotz)
-- version mount.cifs, patch from CVS (p102), and setuid it
-- Clean up docs (guillomovitch spam ;-)
-
-* Sat Aug 16 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc1.2mdk
-- rc1
-- disable test subpackage since it's broken again
-
-* Mon Jul 28 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta3.3mdk
-- Rebuild for kerberos-1.3 on cooker
-- Put printer directories back
-- Add mount.cifs
-- Go back to standard optimisations
-
-* Thu Jul 17 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta3.2mdk
-- beta3
-- remove -g from cflags to avoid large static libraries
-- drop optimisation from O2 to O1 for gcc 3.3.1
-- own some directories for distriblint's benefit
-- use chrpath on distro's that have it to drastically reduce rpmlint score
-
-* Mon Jul 14 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta2.3mdk
-- place non-conditional excludes at the end of files list, to prevent causing
- rpm in Mandrake <=8.2 from segfaulting when processing files.
-- Update default config
-
-* Wed Jul 02 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta2.2mdk
-- 3.0.0beta2
-- manually build editreg
-- Add some new man pages
-
-* Tue Jun 10 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta1.3mdk
-- add provision for passdb-ldap subpackage (it doesn't build like that yet)
-- avoid debugging info on cooker/9.2 for the moment
-- We probably don't need to autoconf (and can thus build on 8.1)
-- We can probably build without kerberos support (and thus on 8.0)
-- Don't require mysql-devel on alpha's (maybe we want to be able to disable
- mysql support for other arches?)
-- We shouldn't need to specifically add openssl to include path, since ssl
- support is deprecated.
-- png icons, change menu title to not conflict with ksambaplugin
-- update to samba-vscan-0.3.3beta1, but it still does not build the vscan
- modules.
-- add -static-devel package
-- Add buildrequires for lib packages that are picked up if installed
- (ncurses, popt) in an attempt to get slbd to build samba3
-- Fix default config (P100)
-
-* Sun Jun 08 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta1.2mdk
-- Get packages into cooker (klama doesn't want to build this package ..)
-- samba-vscan-0.3.2b
-
-* Fri Jun 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha24.2mdk
-- Rename debug package to test and other fixes for rpm-4.2
-- prepare for beta1
-
-* Wed Apr 30 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha24.1mdk
-- Remove some files removed upstream
-- In builds from source, don't terminate on missing docs or unpackaged files
- (if only we could do it for other missing files ...)
-
-* Mon Apr 28 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha24.0mdk
-- Reenable debug package by (--without debug to not build it), fixed post-a23
-- Add bugzilla note for builds from source (also intended for packages made
- available on samba FTP site) at samba team request
-- Fix build from CVS (run autogen.sh, pass options to all rpm commands)
-- Appease distriblint, but not much to be done about /usr/share/swat3/ since
- samba-doc owns some subdirs, and samba-swat others, and they can be installed
- independantly.
-- Apply kaspersky vscan build fix from samba2
-- Final for alpha24
-
-* Wed Apr 23 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha23.3mdk
-- Small fixes in preparation for testing as system samba
-- Make debug package optional (--with debug) since it's often broken
-- Add support for 9.2 (including in-line smbd quota patch for glibc2.3)
-- Add --with options option, which will just show you the available options and exit
-
-* Sun Apr 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha23.2mdk
-- Alpha23
-- buildrequire autconf2.5
-- samba-vscan 0.3.2a
-- Remove patch 102 (upstreamed)
-
-* Thu Mar 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha22.2mdk
-- Alpha22
-- Add profiles binary to server and ntlm_auth to common
-- smbwrapper and torture target broken (only in 9.0?)
-- remove unused source 2
-
-* Tue Mar 04 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha21.4mdk
-- Don't provide samba-{server,client,common} when not system samba (bug #2617)
-- Don't build libsmbclient packages when not system samba
-- Fix conflict between samba-server and samba3-server (pam_smbpass)
-- Fix smbwrapper (from 2.2.7a-5mdk for bug #2356)
-- Fix codepage/charset example (bug #1574)
-
-* Thu Jan 23 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha21.3mdk
-- samba-vscan 0.3.1 (and make it build again), including required inline edits
-- Make all vscan packages provide samba(3)-vscan
-- Build all vscan except kav (requires kaspersky lib) with --with-scanners
-- Add vscan-(scanner).conf files
-- Explicitly add ldapsam for 2.2 compatability when building --with ldap,
- default build now uses new ldap passdb backend (ie you always get ldap)
-- Enable (experimental) tdb passdb backend
-- Fix file ownership conflicts between server and common
-- Cleanup configure, to match order of --help
-- Fix libdir location, was being overridden by --with-fhs
-- Split off a libsmbclient and -devel package
-- Add wins replication init script (patch 102)
-- Workaround passdb/pdb_xml.c not compiling
-- Workaround missing install targets for smbsh/smbwrapper.so in cvs
-- Inline patch smbd/quotas.c for Mandrake >9.0
-
-* Wed Nov 27 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha21.2mdk
-- Remove patch 20,21,22,23,25,26 (upstream)
-- New destdir patch from cvs (18)
-- package installed but non-packaged files
-- new debug subpackage for vfstest and related files (it was that or nuke the
- manpage ;-))
-- use _libdir for libdir instead of _sysconfdir
-- Update samba-vscan (untested)
-
-* Mon Oct 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.3mdk
-- Fix mount.smbfs3 pointing to smbmount not in package
-- Remove unnecessary lines from install (now done by make)
-- Build with ldap and ads on all releases by default
-- Put av-stuff back
-
-* Mon Oct 21 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.2mdk
-- When not building as system samba, avoid conflicting with system samba
-- Macro-ize as much as possible for above (aka finish cleanups)
-- Fix paths in init scripts and logrotate and xinetd
-- Fix provides and obsoletes so as to provide samba, but not obsolete
- current stable until we have a stable release (when it's the system samba).
-- Add warnings to descriptions when not system samba.
-- This is now parallel installable with the normal samba release, for easy
- testing. It shouldn't touch existing installations. Of course, only
- one samba at a time on the same interface!
-
-* Sat Sep 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.1mdk
-- Merge with 2.2.6pre2.2mdk
-- Detect alpha- and beta-, along with pre-releases
-
-* Tue Feb 05 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.1mdk
-- Sync with 2.2.3-2mdk (new --without options, detect when
- building for a different distribution.
-
-* Mon Feb 04 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.0mdk
-- Sync with 2.2.2-10mdk, which added build-time options --with ldap,
- winbind, acl, wins, mdk72, mdk80, mdk81, mdk82, cooker. Added
- warning in description if built with these options.
-
-* Wed Jan 23 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.2mdk
-- Added if's for build_ads, which hopefully will add Active Directory
- Support (by request).
-
-* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.1mdk
-- More syncing with 2.2 rpm (post and postun scripts)
-- Testing without ldap
-
-* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.0mdk
-- 3.0-alpha13
-- Fixed installman.sh patch.
-
-* Wed Jan 09 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.1mdk
-- Fixed %post and %preun for nss_wins, added %post and %preun for
- samba-winbind (chkconfig and winbind entries in nsswitch.conf)
-
-* Sun Dec 23 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.0mdk
-- 3.0-alpha12
-- Sync up with changes made in 2.2.2 to support Mandrake 8.0, 7.2
-- Added new subpackage for swat
-- More if's for ldap.
-
-* Thu Dec 20 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha11-0.0mdk
-- 3.0-alpha11
-
-* Wed Dec 19 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha10-0.0mdk
-- 3.0-alpha10
-
-* Tue Dec 18 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha9-0.0mdk
-- 3.0-alpha9
-
-* Mon Dec 17 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.1mdk
-- Added net command to %files common, pdbedit and smbgroupedit to
- %files, s/%{prefix}\/bin/%{_bindir}/ (the big cleanup).
- Added patch to smb.init from 2.2.2 (got missed with 3.0-alpha1 patches)
-
-* Sun Dec 16 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.0mdk
-- Patch for installman.sh to handle lang=en correctly (p24)
-- added --with-manpages-langs=en,ja,pl (translated manpages), but there
- aren't any manpages for these languages yet ... so we still
- need %dir and %doc entries for them ...
-- patch (p25) to configure.in to support more than 2 languages.
-- addtosmbpass seems to have returned for now, but make_* have disappeared!
-
-* Fri Dec 14 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha6-0.0mdk
-- DESTDIR patch for Makefile.in (p23), remove a lot of %%install scripts
- this forces move of smbcontrol and smbmnt to %{prefix}/bin
- removed --with-pam_smbpass as it doesn't compile.
-
-* Thu Dec 06 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-0.0alpha1mdk
-- Samba 3.0alpha1 released (we missed Samba 3.0alpha0!)
-- Redid smbmount-sbin patch and smb.conf patch (20), removed xfs quota patch
- (applied upstream), removed ook-patch (codepage directory totally different).
-- Added winbind.init (21) and system-auth-winbind.pamd (22). Patches 20-23
- should be applied upstream before 3.0 ships ...
-
-* Wed Dec 05 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-6mdk
-- fixed typo in system-auth-winbind.pamd (--Thanks J. Gluck).
-- fixed %post xxx problem (smb not started in chkconfig --Thanks Viet & B. Kenworthy).
-
-* Fri Nov 23 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-5mdk
-- Had to remove the network recycle bin patch: it seems to mess up
- file deletion from windows (files appear to be "already in use")
-
-* Tue Nov 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-4mdk
-- added network recycle bin patch:
- <http://www.amherst.edu/~bbstone/howto/samba.html>
-- added "recycle bin = .recycled" parameter in smb.conf [homes].
-- fixed winbind/nss_wins perms (oh no I don't own that stuff ;o)
-
-* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-3mdk
-- added %build 8.0 and 7.2, for tweakers to play around.
-- changed configure options:
- . removed --with-mmap, --with-netatalk (obsolete).
- . added --with-msdfs, --with-vfs (seems stable, but still need testing).
-
-* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-2mdk
-- rebuilt with winbind and nss_wins enabled.
-
-* Wed Oct 31 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-1mdk
-- Rebuilt on cooker.
-
-* Wed Oct 31 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.992mdk
-- Patch for smb.conf to fix incorrect lpq command, typo in winbind,
- and add sample linpopup command. Added print driver directories.
-- New XFS quota patch (untested!, samba runs, but do quotas work? We
- can't check yet since the kernel doesn't seem to support XFS quotas!)
-
-* Fri Oct 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-0.99mdk
-- New samba.spec, almost ready for winbind operations. OLA for Buchan Milne
- Who did a tremendous integration work on 2.2.2.
- Rebuild on cooker, please test XFS (ACLs and quotas) again...
-
-* Mon Oct 15 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.9mdk
-- Samba-2.2.2. released! Use %defines to determine which subpackages
- are built and which Mandrake release we are buiding on/for (hint: define
- build_mdk81 1 for Mandrake 8.1 updates)
-
-* Sun Oct 14 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011014mdk
-- %post and %postun for nss_wins
-
-* Wed Oct 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011010mdk
-- New CVS snapshot, /etc/pam.d/system-auth-winbind added
- with configuration to allow easy winbind setup.
-
-* Sun Oct 7 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011007mdk
-- Added new package nss_wins and moved smbpasswd to common (required by
- winbind).
-
-* Sat Oct 6 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011006mdk
-- Added new package winbind.
-
-* Mon Oct 1 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011001mdk
-- Removed patch to smb init.d file (applied in cvs)
-
-* Sun Sep 30 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010930mdk
-- Added winbind init script, which still needs to check for running nmbd.
-
-* Thu Sep 27 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010927mdk
-- Built from samba-2.2.2-pre cvs, added winbindd, wbinfo, nss_winbind and
- pam_winbind, moved pam_smbpass from samba-common to samba. We still
- need a start-up script for winbind, or need to modify existing one.
-
-* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-15mdk
-- Enabled acl support (XFS acls now supported by kernel-2.4.8-21mdk thx Chmou)
- Added smbd patch to support XFS quota (Nathan Scott)
-
-* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-14mdk
-- Oops! smbpasswd created in wrong directory...
-
-* Tue Sep 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-13mdk
-- Removed a wrong comment in smb.conf.
- Added creation of smbpasswd during install.
-
-* Mon Aug 27 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-12mdk
-- really less verbose %%post
-
-* Sat Aug 25 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1a-11mdk
-- Fix shared libs in /usr/bin silliness.
-
-* Thu Aug 23 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-10mdk
-- less verbose %%post
-
-* Wed Aug 22 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-9mdk
-- Added smbcacls (missing in %files), modification to smb.conf: ([printers]
- is still needed, even with point-and-print!, user add script should
- use name and not gid, since we may not get the gid . New script for
- putting manpages in place (still need to be added in %files!). Moved
- smbcontrol to sbin and added it and its man page to %files.
-
-* Wed Aug 22 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-8mdk
-- cleanup /var/lib/samba/codepage/src
-
-* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-7mdk
-- moved codepage generation to %%install and codepage dir to /var/lib/samba
-
-* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-6mdk
-- /lib/* was in both samba and samba-common
- Introducing samba-doc: "alas, for the sake of thy modem, shalt thou remember
- when Samba was under the Megabyte..."
-
-* Fri Aug 03 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-5mdk
-- Added "the gc touch" to smbinit through the use of killall -0 instead of
- grep cupsd | grep -v grep (too many greps :o)
-
-* Wed Jul 18 2001 Stefan van der Eijk <stefan@eijk.nu> 2.2.1a-4mdk
-- BuildRequires: libcups-devel
-- Removed BuildRequires: openssl-devel
-
-* Fri Jul 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-3mdk
-- replace chkconfig --add/del with --level 35 on/reset.
-
-* Fri Jul 13 2001 Geoffrey Lee <snailtalk@mandrakesoft.cm> 2.2.1a-2mdk
-- Replace discription s/inetd/xinetd/, we all love xinetd, blah.
-
-* Thu Jul 12 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-1mdk
-- Bugfix release. Fixed add user script, added print$ share and printer admin
- We need to test interaction of new print support with CUPS, but printer
- driver uploads should work.
-
-* Wed Jul 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-17mdk
-- fixed smb.conf a bit, rebuilt on cooker.
-
-* Tue Jul 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-16mdk
-- Finally, samba 2.2.1 has actually been release. At least we were ready!
- Cleaned up smb.conf, and added some useful entries for domain controlling.
- Migrated changes made in samba's samba2.spec for 2.2.1 to this file.
- Added groupadd command in post to create a group for samba machine accounts.
- (We should still check the postun, samba removes pam, logs and cache)
-
-* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-15mdk
-- fixed smbwrapper compile options.
-
-* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-14mdk
-- added LFS support.
- added smbwrapper support (smbsh)
-
-* Wed Jun 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-13mdk
-- /sbin/mount.smb and /sbin/mount.smbfs now point to the correct location
- of smbmount (/usr/bin/smbmount)
-
-* Tue Jun 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-12mdk
-- smbmount and smbumount are now in /usr/bin and SUID.
- added ||: to triggerpostun son you don't get error 1 anymore when rpm -e
- Checked the .bz2 sources with file *: everything is OK now (I'm so stupid ;o)!
-
-* Tue Jun 19 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1-11mdk
-- s/Copyright/License/;
-- Stop Sylvester from pretending .gz source to be .bz2 source via filename
- aka really bzip2 the source.
-
-* Mon Jun 18 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-10mdk
-- changed Till's startup script modifications: now samba is being reloaded
- automatically 1 minute after it has started (same reasons as below in 9mdk)
- added _post_ and _preun_ for service smb
- fixed creation of /var/lib/samba/{netlogon,profiles} (%dir was missing)
-
-* Thu Jun 14 2001 Till Kamppeter <till@mandrakesoft.com> 2.2.1-9mdk
-- Modified the Samba startup script so that in case of CUPS being used as
- printing system Samba only starts when the CUPS daemon is ready to accept
- requests. Otherwise the CUPS queues would not appear as Samba shares.
-
-* Mon Jun 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-8mdk
-- patched smbmount.c to have it call smbmnt in sbin (thanks Seb).
-
-* Wed May 30 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-7mdk
-- put SWAT menu icons back in place.
-
-* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-6mdk
-- OOPS! fixed smbmount symlinks
-
-* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-5mdk
-- removed inetd postun script, replaced with xinetd.
- updated binary list (smbcacls...)
- cleaned samba.spec
-
-* Mon May 28 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-4mdk
-- Changed configure options to point to correct log and codepage directories,
- added crude script to fix logrotate file for new log file names, updated
- patches to work with current CVS.
-
-* Thu May 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-3mdk
-- Cleaned and updated the %files section.
-
-* Sat May 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-2mdk
-- Moved all samba files from /etc to /etc/samba (Thanks DomS!).
- Fixed fixinit patch (/etc/samba/smb.conf)
-
-* Fri May 18 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-1mdk
-- Now use packaging/Mandrake/smb.conf, removed unused and obsolete
- patches, moved netlogon and profile shares to /var/lib/samba in the
- smb.conf to match the spec file. Added configuration for ntlogon to
- smb.conf. Removed pam-foo, fixinit and makefilepath patches. Removed
- symlink I introduced in 2.2.0-1mdk
-
-* Thu May 3 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-5mdk
-- Added more configure options. Changed Description field (thx John T).
-
-* Wed Apr 25 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-4mdk
-- moved netlogon and profiles to /var/lib/samba by popular demand ;o)
-
-* Tue Apr 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-3mdk
-- moved netlogon and profiles back to /home.
-
-* Fri Apr 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-2mdk
-- fixed post inetd/xinetd script&
-
-* Thu Apr 19 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.0-1mdk
-- Upgrade to 2.2.0. Merged most of 2.0.7-25mdk's patches (beware
- nasty "ln -sf samba-%{ver} ../samba-2.0.7" hack to force some patches
- to take. smbadduser and addtosmbpass seem to have disappeared. Moved
- all Mandrake-specific files to packaging/Mandrake and made patches
- from those shipped with samba. Moved netlogon to /home/samba and added
- /home/samba/profiles. Added winbind,smbfilter and debug2html to make command.
-
-* Thu Apr 12 2001 Frederic Crozat <fcrozat@mandrakesoft.com> 2.0.7-25mdk
-- Fix menu entry and provide separate menu entry for GNOME
- (nautilus doesn't support HTTP authentication yet)
-- Add icons in package
-
-* Fri Mar 30 2001 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-24mdk
-- use new server macros
-
-* Wed Mar 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-23mdk
-- check whether /etc/inetd.conf exists (upgrade) or not (fresh install).
-
-* Thu Mar 15 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-22mdk
-- spec cosmetics, added '-r' option to lpr-cups command line so files are
- removed from /var/spool/samba after printing.
-
-* Tue Mar 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-21mdk
-- merged last rh patches.
-
-* Thu Nov 23 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-20mdk
-- removed dependencies on cups and cups-devel so one can install samba without using cups
-- added /home/netlogon
-
-* Mon Nov 20 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-19mdk
-- Changed default print command in /etc/smb.conf, so that the Windows
- driver of the printer has to be used on the client.
-- Fixed bug in smbspool which prevented from printing from a
- Linux-Samba-CUPS client to a Windows server through the guest account.
-
-* Mon Oct 16 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-18mdk
-- Moved "smbspool" (Samba client of CUPS) to the samba-client package
-
-* Sat Oct 7 2000 Stefan van der Eijk <s.vandereijk@chello.nl> 2.0.7-17mdk
-- Added RedHat's "quota" patch to samba-glibc21.patch.bz2, this fixes
- quota related compile problems on the alpha.
-
-* Wed Oct 4 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-16mdk
-- Fixed 'guest ok = ok' flag in smb.conf
-
-* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-15mdk
-- Allowed guest account to print in smb.conf
-- added swat icon in menu
-
-* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-14mdk
-- Removed rh ssl patch and --with-ssl flag: not appropriate for 7.2
-
-* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-13mdk
-- Changed fixinit patch.
-- Changed smb.conf for better CUPS configuration.
-- Thanks Fred for doing this ---vvv.
-
-* Tue Oct 3 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-12mdk
-- menu entry for web configuration tool.
-- merge with rh: xinetd + ssl + pam_stack.
-- Added smbadduser rh-bugfix w/o relocation of config-files.
-
-* Mon Oct 2 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-11mdk
-- added build requires on cups-devel and pam-devel.
-
-* Mon Oct 2 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-10mdk
-- Fixed smb.conf entry for CUPS: "printcap name = lpstat", "lpstats" was
- wrong.
-
-* Mon Sep 25 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-9mdk
-- Cosmetic changes to make rpmlint more happy
-
-* Wed Sep 11 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-8mdk
-- added linkage to the using_samba book in swat
-
-* Fri Sep 01 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-7mdk
-- Added CUPS support to smb.conf
-- Added internationalization options to smb.conf [Global]
-
-* Wed Aug 30 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-6mdk
-- Put "smbspool" to the files to install
-
-* Wed Aug 30 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-5mdk
-- Did some cleaning in the patches
-
-* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-4mdk
-- relocated man pages from /usr/man to /usr/share/man for compatibility reasons
-
-* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-3mdk
-- added make_unicodemap and build of unicode_map.$i in the spec file
-
-* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-2mdk
-- renamed /etc/codepage/codepage.$i into /etc/codepage/unicode_map.$i to fix smbmount bug.
-
-* Fri Jul 07 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-1mdk
-- 2.0.7
-
-* Wed Apr 05 2000 Francis Galiegue <fg@mandrakesoft.com> 2.0.6-4mdk
-
-- Titi sucks, does not put versions in changelog
-- Fixed groups for -common and -client
-- /usr/sbin/samba is no config file
-
-* Thu Mar 23 2000 Thierry Vignaud <tvignaud@mandrakesoft.com>
-- fix buggy post install script (pixel)
-
-* Fri Mar 17 2000 Francis Galiegue <francis@mandrakesoft.com> 2.0.6-2mdk
-
-- Changed group according to 7.1 specs
-- Some spec file changes
-- Let spec-helper do its job
-
-* Thu Nov 25 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- 2.0.6.
-
-* Tue Nov 2 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- Merge with rh changes.
-- Split in 3 packages.
-
-* Fri Aug 13 1999 Pablo Saratxaga <pablo@@mandrakesoft.com>
-- corrected a bug with %post (the $1 parameter is "1" in case of
- a first install, not "0". That parameter is the number of packages
- of the same name that will exist after running all the steps if nothing
- is removed; so it is "1" after first isntall, "2" for a second install
- or an upgrade, and "0" for a removal)
-
-* Wed Jul 28 1999 Pablo Saratxaga <pablo@@mandrakesoft.com>
-- made smbmnt and smbumount suid root, and only executable by group 'smb'
- add to 'smb' group any user that should be allowed to mount/unmount
- SMB shared directories
-
-* Fri Jul 23 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- 2.0.5a (bug security fix).
-
-* Wed Jul 21 1999 Axalon Bloodstone <axalon@linux-mandrake.com>
-- 2.0.5
-- cs/da/de/fi/fr/it/tr descriptions/summaries
-
-* Sun Jun 13 1999 Bernhard Rosenkränzer <bero@mandrakesoft.com>
-- 2.0.4b
-- recompile on a system that works ;)
-
-* Wed Apr 21 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- Mandrake adaptations.
-- Bzip2 man-pages.
-
-* Fri Mar 26 1999 Bill Nottingham <notting@redhat.com>
-- add a mount.smb to make smb mounting a little easier.
-- smb filesystems apparently do not work on alpha. Oops.
-
-* Thu Mar 25 1999 Bill Nottingham <notting@redhat.com>
-- always create codepages
-
-* Tue Mar 23 1999 Bill Nottingham <notting@redhat.com>
-- logrotate changes
-
-* Sun Mar 21 1999 Cristian Gafton <gafton@redhat.com>
-- auto rebuild in the new build environment (release 3)
-
-* Fri Mar 19 1999 Preston Brown <pbrown@redhat.com>
-- updated init script to use graceful restart (not stop/start)
-
-* Tue Mar 9 1999 Bill Nottingham <notting@redhat.com>
-- update to 2.0.3
-
-* Thu Feb 18 1999 Bill Nottingham <notting@redhat.com>
-- update to 2.0.2
-
-* Mon Feb 15 1999 Bill Nottingham <notting@redhat.com>
-- swat swat
-
-* Tue Feb 9 1999 Bill Nottingham <notting@redhat.com>
-- fix bash2 breakage in post script
-
-* Fri Feb 5 1999 Bill Nottingham <notting@redhat.com>
-- update to 2.0.0
-
-* Mon Oct 12 1998 Cristian Gafton <gafton@redhat.com>
-- make sure all binaries are stripped
-
-* Thu Sep 17 1998 Jeff Johnson <jbj@redhat.com>
-- update to 1.9.18p10.
-- fix %triggerpostun.
-
-* Tue Jul 07 1998 Erik Troan <ewt@redhat.com>
-- updated postun triggerscript to check $0
-- clear /etc/codepages from %preun instead of %postun
-
-* Mon Jun 08 1998 Erik Troan <ewt@redhat.com>
-- made the %postun script a tad less agressive; no reason to remove
- the logs or lock file (after all, if the lock file is still there,
- samba is still running)
-- the %postun and %preun should only exectute if this is the final
- removal
-- migrated %triggerpostun from Red Hat's samba package to work around
- packaging problems in some Red Hat samba releases
-
-* Sun Apr 26 1998 John H Terpstra <jht@samba.anu.edu.au>
-- minor tidy up in preparation for release of 1.9.18p5
-- added findsmb utility from SGI package
-
-* Wed Mar 18 1998 John H Terpstra <jht@samba.anu.edu.au>
-- Updated version and codepage info.
-- Release to test name resolve order
-
-* Sat Jan 24 1998 John H Terpstra <jht@samba.anu.edu.au>
-- Many optimisations (some suggested by Manoj Kasichainula <manojk@io.com>
-- Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb
-- Compounded make line
-- Updated smb.init restart mechanism
-- Use compound mkdir -p line instead of individual calls to mkdir
-- Fixed smb.conf file path for log files
-- Fixed smb.conf file path for incoming smb print spool directory
-- Added a number of options to smb.conf file
-- Added smbadduser command (missed from all previous RPMs) - Doooh!
-- Added smbuser file and smb.conf file updates for username map
git.samba.org / gd / samba-autobuild / .git / commitdiff
