-Summary: Samba SMB client and server
-Name: samba
-Version: PVERSION
-Release: PRELEASE
-Copyright: GNU GPL version 2
-Group: Networking
-Source: ftp://samba.org/pub/samba/samba-%{version}.tar.gz
-Packager: Gerald (Jerry) Carter [Samba-Team] <jerry@samba.org>
-Requires: pam >= 0.72 kernel >= 2.2.1 glibc >= 2.1.2
-Prereq: chkconfig fileutils
-BuildRoot: /var/tmp/samba
+# Note that this file exists in Mandrake packaging cvs (as samba3.spec)
+# and samba cvs (as packaging/Mandrake/samba2.spec.tmpl).
+# Keep in mind that any changes should take both locations into account
+# Considerable effort has gone into making this possible, so that only
+# one spec file is maintained, please don't break it.
+# It should be possible, without any changes to this file, to build
+# binary packages on most recent Mandrake releases:
+# 1)from official source releases, using 'cd packaging/Mandrake; sh makerpms.sh'
+# 2)from cvs snapshots, using 'cd packaging/Mandrake; sh makerpms-cvs.sh <ver>'
+# 3)using official source releases and updated Mandrake packaging, by
+# 'rpm -ba samba.spec'
+# As such, any sources or patches used in a build from a samba release or
+# cvs should be submitted for inclusion in samba cvs.
+
+%define pkg_name samba
+%define ver 3.0.0beta2
+%define rel 3mdk
+%define vscanver 0.3.3beta1
+%define libsmbmajor 0
+
+# Version and release replaced by samba-team at release from samba cvs
+%define pversion PVERSION
+%define prelease PRELEASE
+
+#Check to see if p(version|release) has been replaced (1 if replaced)
+%define have_pversion %(if [ "%pversion" = `echo "pversion" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi)
+%define have_prelease %(if [ "%prelease" = `echo "prelease" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi)
+
+%if %have_pversion
+%define source_ver %{pversion}
+%global _unpackaged_files_terminate_build 0
+%global _missing_doc_files_terminate_build 0
+%else
+%define source_ver %{ver}
+%endif
+
+# We might have a prerelease:
+%define have_pre %(echo %source_ver|awk '{p=0} /[a-z,A-Z][a-z,A-Z]/ {p=1} {print p}')
+%if %have_pre
+%define pre_ver %(perl -e '$name="%source_ver"; print ($name =~ /(.*?)[a-z]/);')
+%define pre_pre %(echo %source_ver|sed -e 's/%pre_ver//g')
+%endif
+
+# Check to see if we are running a build from a tarball release from samba.org
+# (%have_pversion) If so, disable vscan, unless explicitly requested
+# (--with vscan).
+%define build_vscan 1
+%if %have_pversion
+%define build_vscan 0
+%{?_with_vscan: %define build_vscan 1}
+%endif
+
+# We now do detection of the Mandrake release we are building on:
+#%define build_cooker %(if [ `awk '{print $3}' /etc/mandrake-release` = "Cooker" ];then echo 1; else echo 0; fi)
+#%define build_cooker %(if [[ `cat /etc/mandrake-release|grep Cooker` ]];then echo 1; else echo 0; fi)
+%define build_mdk92 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.2 ];then echo 1; else echo 0; fi)
+%define build_mdk91 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.1 ];then echo 1; else echo 0; fi)
+%define build_mdk90 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.0 ];then echo 1; else echo 0; fi)
+%define build_mdk82 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.2 ];then echo 1; else echo 0; fi)
+%define build_mdk81 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.1 ];then echo 1; else echo 0; fi)
+%define build_mdk80 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.0 ];then echo 1; else echo 0; fi)
+%define build_mdk72 %(if [ `awk '{print $4}' /etc/mandrake-release` = 7.2 ];then echo 1; else echo 0; fi)
+%define build_non_default 0
+
+# Default options
+%define build_system 0
+%define build_acl 1
+%define build_winbind 1
+%define build_wins 1
+%define build_ldap 0
+%define build_ads 1
+%define build_scanners 0
+# CUPS supports functionality for 'printcap name = cups' (9.0 and later):
+%define build_cupspc 0
+
+# Set defaults for each version
+%if %build_mdk92
+%define build_cupspc 1
+%endif
+
+%if %build_mdk91
+%define build_cupspc 1
+%endif
+
+%if %build_mdk90
+%endif
+
+%if %build_mdk82
+%endif
+
+%if %build_mdk81
+%define build_winbind 0
+%define build_wins 0
+%endif
+
+%if %build_mdk80
+%define build_acl 0
+%define build_winbind 0
+%define build_wins 0
+%define build_ads 0
+%endif
+
+%if %build_mdk72
+%define build_acl 0
+%define build_winbind 0
+%define build_wins 0
+%define build_ads 0
+%endif
+
+
+# Allow commandline option overrides (borrowed from Vince's qmail srpm):
+# To use it, do rpm [-ba|--rebuild] --with 'xxx'
+# Check if the rpm was built with the defaults, otherwise we inform the user
+%define build_non_default 0
+%{?_with_system: %{expand: %%global build_system 1}}
+%{?_without_system: %{expand: %%global build_system 0}}
+%{?_with_acl: %{expand: %%global build_acl 1}}
+%{?_with_acl: %{expand: %%global build_non_default 1}}
+%{?_without_acl: %{expand: %%global build_acl 0}}
+%{?_without_acl: %{expand: %%global build_non_default 1}}
+%{?_with_winbind: %{expand: %%global build_winbind 1}}
+%{?_with_winbind: %{expand: %%global build_non_default 1}}
+%{?_without_winbind: %{expand: %%global build_winbind 0}}
+%{?_without_winbind: %{expand: %%global build_non_default 1}}
+%{?_with_wins: %{expand: %%global build_wins 1}}
+%{?_with_wins: %{expand: %%global build_non_default 1}}
+%{?_without_wins: %{expand: %%global build_wins 0}}
+%{?_without_wins: %{expand: %%global build_non_default 1}}
+%{?_with_ldap: %{expand: %%global build_ldap 1}}
+%{?_with_ldap: %{expand: %%global build_non_default 1}}
+%{?_without_ldap: %{expand: %%global build_ldap 0}}
+%{?_without_ldap: %{expand: %%global build_non_default 1}}
+%{?_with_ads: %{expand: %%global build_ads 1}}
+%{?_with_ads: %{expand: %%global build_non_default 1}}
+%{?_without_ads: %{expand: %%global build_ads 0}}
+%{?_without_ads: %{expand: %%global build_non_default 1}}
+%{?_with_scanners: %{expand: %%global build_scanners 1}}
+%{?_with_scanners: %{expand: %%global build_non_default 1}}
+
+# As if that weren't enough, we're going to try building with antivirus
+# support as an option also
+%define build_fprot 0
+%define build_kaspersky 0
+%define build_mks 0
+%define build_openav 0
+%define build_sophos 0
+%define build_symantec 0
+%define build_trend 0
+%if %build_vscan && %build_scanners
+#These can be enabled here by default
+# (kaspersky requires their library present)
+%define build_fprot 1
+%define build_mks 1
+%define build_openav 1
+%define build_sophos 1
+%define build_trend 1
+%endif
+%if %build_vscan
+%{?_with_fprot: %{expand: %%global build_fprot 1}}
+%{?_with_kaspersky: %{expand: %%global build_kaspersky 1}}
+%{?_with_mks: %{expand: %%global build_mks 1}}
+%{?_with_openav: %{expand: %%global build_openav 1}}
+%{?_with_sophos: %{expand: %%global build_sophos 1}}
+#%{?_with_symantec: %{expand: %%global build_symantec 1}}
+%{?_with_trend: %{expand: %%global build_trend 1}}
+%global vscandir samba-vscan-%{vscanver}
+%endif
+%global vfsdir examples.bin/VFS
+
+#Standard texts for descriptions:
+%define message_bugzilla() %(echo -e -n "Please file bug reports for this package at Mandrake bugzilla \\n(http://qa.mandrakesoft.com) under the product name %{1}")
+%define message_system %(echo -e -n "NOTE: This is a prerelease of samba-%{samba_major}, not intended for production\\n use. Rather these packages are provided, parallel installable\\nwith samba-2.2.x, for testing purposes")
+
+%ifarch alpha
+%define build_expsam xml
+%else
+%define build_expsam mysql,xml
+%endif
+
+#Workaround missing macros in 8.x:
+%{!?perl_vendorlib: %{expand: %%global perl_vendorlib %{perl_sitearch}/../}}
+
+# Determine whether this is the system samba or not.
+%if %build_system
+%define samba_major %{nil}
+%else
+%define samba_major 3
+%endif
+
+Summary: Samba SMB server.
+Name: %{pkg_name}%{samba_major}
+
+%if %have_pre
+Version: %{pre_ver}
+%else
+Version: %{source_ver}
+%endif
+
+%if %have_prelease && !%have_pre
+Release: 1.%{prelease}mdk
+%endif
+%if %have_prelease && %have_pre
+Release: 0.%{pre_pre}.%{prelease}mdk
+%endif
+%if !%have_prelease && !%have_pre
+Release: %{rel}
+%endif
+%if !%have_prelease && %have_pre
+Release: 0.%{pre_pre}.%{rel}
+%endif
+
+License: GPL
+Group: System/Servers
+Source: ftp://samba.org/pub/samba/samba-%{source_ver}.tar.bz2
+URL: http://www.samba.org
+Source1: samba.log
+Source3: samba.xinetd
+Source4: swat_48.png.bz2
+Source5: swat_32.png.bz2
+Source6: swat_16.png.bz2
+Source7: README.%{name}-mandrake-rpm
+%if %build_vscan
+Source8: samba-vscan-%{vscanver}.tar.bz2
+%endif
+Source10: samba-print-pdf.sh.bz2
+Patch1: smbw.patch.bz2
+Patch2: samba-2.2.0-gawk.patch.bz2
+Patch3: samba-2.2.0-buildroot.patch.bz2
+Patch4: samba-3.0-smbmount-sbin.patch.bz2
+%if !%have_pversion
+# Version specific patches: current version
+Patch100: samba-3.0.0beta2-mandrake-packaging.patch.bz2
+%else
+# Version specific patches: upcoming version
+%endif
+# Limbo patches (applied to prereleases, but not preleases, ie destined for
+# samba CVS)
+%if %have_pversion && %have_pre
+%endif
+Requires: pam >= 0.64, samba-common = %{version}
+BuildRequires: pam-devel readline-devel libncurses-devel popt-devel
+BuildRequires: libxml2-devel
+%ifnarch alpha
+BuildRequires: mysql-devel
+%endif
+%if %build_acl
+BuildRequires: libacl-devel
+%endif
+%if %build_mdk72
+BuildRequires: cups-devel
+%else
+BuildRequires: libcups-devel
+%endif
+BuildRequires: libldap-devel
+%if %build_ads
+BuildRequires: libldap-devel krb5-devel
+%endif
+BuildRoot: %{_tmppath}/%{name}-root
Prefix: /usr
+Prereq: /sbin/chkconfig /bin/mktemp /usr/bin/killall
+Prereq: fileutils sed /bin/grep
%description
Samba provides an SMB server which can be used to provide
and does NOT need NetBEUI (Microsoft Raw NetBIOS frame)
protocol.
-Samba-2.2 features working NT Domain Control capability and
-includes the SWAT (Samba Web Administration Tool) that
-allows samba's smb.conf file to be remotely managed using your
+Samba-3.0 features working NT Domain Control capability and
+includes the SWAT (Samba Web Administration Tool) that
+allows samba's smb.conf file to be remotely managed using your
favourite web browser. For the time being this is being
-enabled on TCP port 901 via inetd.
+enabled on TCP port 901 via xinetd. SWAT is now included in
+it's own subpackage, samba-swat.
-Users are advised to use Samba-2.2 as a Windows NT4
-Domain Controller only on networks that do NOT have a Windows
-NT Domain Controller. This release does NOT as yet have
-Backup Domain control ability.
+Please refer to the WHATSNEW.txt document for fixup information.
+This binary release includes encrypted password support.
+
+Please read the smb.conf file and ENCRYPTION.txt in the
+docs directory for implementation details.
+%if %have_pversion
+%message_bugzilla samba3
+%endif
+%if !%build_system
+%message_system
+%endif
+%if %build_non_default
+WARNING: This RPM was built with command-line options. Please
+see README.%{name}-mandrake-rpm in the documentation for
+more information.
+%endif
+
+%package server
+URL: http://www.samba.org
+Summary: Samba (SMB) server programs.
+Requires: %{name}-common = %{version}
+PreReq: rpm-helper
+Group: Networking/Other
+%if %build_system
+Provides: samba
+Obsoletes: samba
+Provides: samba-server-ldap
+Obsoletes: samba-server-ldap
+Provides: samba3-server
+Obsoletes: samba3-server
+%else
+#Provides: samba-server
+%endif
+
+%description server
+Samba-server provides a SMB server which can be used to provide
+network services to SMB (sometimes called "Lan Manager")
+clients. Samba uses NetBIOS over TCP/IP (NetBT) protocols
+and does NOT need NetBEUI (Microsoft Raw NetBIOS frame)
+protocol.
+
+Samba-3.0 features working NT Domain Control capability and
+includes the SWAT (Samba Web Administration Tool) that
+allows samba's smb.conf file to be remotely managed using your
+favourite web browser. For the time being this is being
+enabled on TCP port 901 via xinetd. SWAT is now included in
+it's own subpackage, samba-swat.
Please refer to the WHATSNEW.txt document for fixup information.
This binary release includes encrypted password support.
Please read the smb.conf file and ENCRYPTION.txt in the
docs directory for implementation details.
+%if %have_pversion
+%message_bugzilla samba3-server
+%endif
+%if !%build_system
+%message_system
+%endif
-%changelog
-* Mon May 21 2001 Gerald (Jerry) Carter <jerry@samba.org>
- - removed docs/htmldocs and docs/manpages from /usr/share/docs
- These het installed in /usr/share/swat already
- - Fix for codepages and src not getting installed in the RPM
- - Fixed minor typos
+%package client
+URL: http://www.samba.org
+Summary: Samba (SMB) client programs.
+Group: Networking/Other
+Requires: %{name}-common = %{version}
+%if %build_system
+Provides: samba3-client
+Obsoletes: samba3-client
+Obsoletes: smbfs
+%else
+#Provides: samba-client
+%endif
-* Mon Apr 23 2001 Gerald (Jerry) Carter <jerry@samba.org>
- - Added a few bug fixes to release the first Mandrake RPMS
+%description client
+Samba-client provides some SMB clients, which complement the built-in
+SMB filesystem in Linux. These allow the accessing of SMB shares, and
+printing to SMB printers.
+%if %have_pversion
+%message_bugzilla samba3-client
+%endif
+%if !%build_system
+%message_system
+%endif
-* Sat Apr 14 2001 John H Terpstra <jht@samba.org>
- - Added official samba-team support for Mandrakesoft
- - We get a lot of requests for this!
+%package common
+URL: http://www.samba.org
+Summary: Files used by both Samba servers and clients.
+Group: System/Servers
+%if %build_system
+Provides: samba-common-ldap
+Obsoletes: samba-common-ldap
+Provides: samba3-common
+Obsoletes: samba3-common
+%else
+#Provides: samba-common
+%endif
+
+%description common
+Samba-common provides files necessary for both the server and client
+packages of Samba.
+%if %have_pversion
+%message_bugzilla samba3-common
+%endif
+%if !%build_system
+%message_system
+%endif
+
+%package doc
+URL: http://www.samba.org
+Summary: Documentation for Samba servers and clients.
+Group: System/Servers
+Requires: %{name}-common = %{version}
+%if %build_system
+Obsoletes: samba3-doc
+Provides: samba3-doc
+%else
+#Provides: samba-doc
+%endif
+
+%description doc
+Samba-doc provides documentation files for both the server and client
+packages of Samba.
+%if %have_pversion
+%message_bugzilla samba3-doc
+%endif
+%if !%build_system
+%message_system
+%endif
+
+%package swat
+URL: http://www.samba.org
+Summary: The Samba Web Administration Tool.
+Requires: %{name}-server = %{version}
+Requires: xinetd
+Group: System/Servers
+%if %build_system
+Provides: samba-swat-ldap
+Obsoletes: samba-swat-ldap
+Provides: samba3-swat
+Obsoletes: samba3-swat
+%else
+#Provides: samba-swat
+%endif
+
+%description swat
+SWAT (the Samba Web Administration Tool) allows samba's smb.conf file
+to be remotely managed using your favourite web browser. For the time
+being this is being enabled on TCP port 901 via xinetd. Note that
+SWAT does not use SSL encryption, nor does it preserve comments in
+your smb.conf file. Webmin uses SSL encryption by default, and
+preserves comments in configuration files, even if it does not display
+them, and is therefore the preferred method for remotely managing
+Samba.
+%if %have_pversion
+%message_bugzilla samba3-swat
+%endif
+%if !%build_system
+%message_system
+%endif
+
+%if %build_winbind
+%package winbind
+URL: http://www.samba.org
+Summary: Samba-winbind daemon, utilities and documentation
+Group: System/Servers
+Requires: %{name}-common = %{version}
+%description winbind
+Provides the winbind daemon and testing tools to allow authentication
+and group/user enumeration from a Windows or Samba domain controller.
+%endif
+%if %have_pversion
+%message_bugzilla samba3-winbind
+%endif
+%if !%build_system
+%message_system
+%endif
+
+%if %build_wins
+%package -n nss_wins%{samba_major}
+URL: http://www.samba.org
+Summary: Name Service Switch service for WINS
+Group: System/Servers
+Requires: %{name}-common = %{version}
+PreReq: glibc
+%description -n nss_wins%{samba_major}
+Provides the libnss_wins shared library which resolves NetBIOS names to
+IP addresses.
+%endif
+%if %have_pversion
+%message_bugzilla nss_wins3
+%endif
+%if !%build_system
+%message_system
+%endif
+
+%if %{?_without_test:0}%{!?_without_test:1}
+%package test
+URL: http://www.samba.org
+Summary: Debugging and benchmarking tools for samba
+Group: System/Servers
+Requires: %{name}-common = %{version}
+%endif
+%if %build_system && %{?_without_test:0}%{!?_without_test:1}
+Provides: samba3-test samba3-debug
+Obsoletes: samba3-test samba3-debug
+%else
+Provides: samba-test samba3-debug
+Obsoletes: samba3-debug
+%endif
+%if %{?_without_test:0}%{!?_without_test:1}
+
+%description test
+This package provides tools for benchmarking samba, and debugging
+the correct operation of tools against smb servers.
+%endif
+
+%if %build_system
+%package -n libsmbclient%{libsmbmajor}
+URL: http://www.samba.org
+Summary: SMB Client Library
+Group: System/Libraries
+Provides: libsmbclient
+
+%description -n libsmbclient%{libsmbmajor}
+This package contains the SMB client library, part of the samba
+suite of networking software, allowing other software to access
+SMB shares.
+%endif
+%if %have_pversion && %build_system
+%message_bugzilla libsmbclient%{libsmbmajor}
+%endif
+
+%if %build_system
+%package -n libsmbclient%{libsmbmajor}-devel
+URL: http://www.samba.org
+Summary: SMB Client Library Development files
+Group: System/Libraries
+Provides: libsmbclient-devel
+
+%description -n libsmbclient%{libsmbmajor}-devel
+This package contains the development files for the SMB client
+library, part of the samba suite of networking software, allowing
+the development of other software to access SMB shares.
+%endif
+%if %have_pversion && %build_system
+%message_bugzilla libsmbclient%{libsmbmajor}-devel
+%endif
+
+%if %build_system
+%package -n libsmbclient%{libsmbmajor}-static-devel
+URL: http://www.samba.org
+Summary: SMB Client Static Library Development files
+Group: System/Libraries
+Provides: libsmbclient-static-devel = %{version}-%{release}
+Requires: libsmbclient%{libsmbmajor}-devel = %{version}-%{release}
+
+%description -n libsmbclient%{libsmbmajor}-static-devel
+This package contains the static development files for the SMB
+client library, part of the samba suite of networking software,
+allowing the development of other software to access SMB shares.
+%endif
+%if %have_pversion && %build_system
+%message_bugzilla libsmbclient%{libsmbmajor}-devel
+%endif
+
+#%package passdb-ldap
+#URL: http://www.samba.org
+#Summary: Samba password database plugin for MySQL
+#Group: System/Libraries
+#
+#%description passdb-ldap
+#The passdb-ldap package for samba provides a password database
+#backend allowing samba to store account details in an LDAP
+#database
+#_if %have_pversion
+#_message_bugzilla samba3-passdb-ldap
+#_endif
+#_if !%build_system
+#_message_system
+#_endif
+
+%ifnarch alpha
+%package passdb-mysql
+URL: http://www.samba.org
+Summary: Samba password database plugin for MySQL
+Group: System/Libraries
+
+%description passdb-mysql
+The passdb-mysql package for samba provides a password database
+backend allowing samba to store account details in a MySQL
+database
+%endif
+%ifnarch alpha && %have_pversion
+%message_bugzilla samba3-passdb-mysql
+%endif
+%ifnarch alpha && !%build_system
+%message_system
+%endif
+
+%package passdb-xml
+URL: http://www.samba.org
+Summary: Samba password database plugin for XML files
+Group: System/Libraries
+
+%description passdb-xml
+The passdb-xml package for samba provides a password database
+backend allowing samba to store account details in XML files.
+%if %have_pversion
+%message_bugzilla samba3-passdb-xml
+%endif
+%if !%build_system
+%message_system
+%endif
+
+#Antivirus packages:
+%if %build_fprot
+%package vscan-fprot
+Summary: On-access virus scanning for samba using FPROT
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+Autoreq: 0
+%description vscan-fprot
+A vfs-module for samba to implement on-access scanning using the
+FPROT antivirus software (which must be installed to use this).
+%endif
+
+%if %build_kaspersky
+%package vscan-kaspersky
+Summary: On-access virus scanning for samba using Kaspersky
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+Autoreq: 0
+%description vscan-kaspersky
+A vfs-module for samba to implement on-access scanning using the
+Kaspersky antivirus software (which must be installed to use this).
+%endif
+
+%if %build_mks
+%package vscan-mks
+Summary: On-access virus scanning for samba using MKS
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+Autoreq: 0
+%description vscan-mks
+A vfs-module for samba to implement on-access scanning using the
+MKS antivirus software (which must be installed to use this).
+%endif
+
+%if %build_openav
+%package vscan-openav
+Summary: On-access virus scanning for samba using OpenAntivirus
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+Autoreq: 0
+%description vscan-openav
+A vfs-module for samba to implement on-access scanning using the
+OpenAntivirus antivirus software (which must be installed to use this).
+%endif
+
+%if %build_sophos
+%package vscan-sophos
+Summary: On-access virus scanning for samba using Sophos
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+Autoreq: 0
+%description vscan-sophos
+A vfs-module for samba to implement on-access scanning using the
+Sophos antivirus software (which must be installed to use this).
+%endif
+
+%if %build_symantec
+%package vscan-symantec
+Summary: On-access virus scanning for samba using Symantec
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+Autoreq: 0
+%description vscan-symantec
+A vfs-module for samba to implement on-access scanning using the
+Symantec antivirus software (which must be installed to use this).
+%endif
+
+%if %build_trend
+%package vscan-trend
+Summary: On-access virus scanning for samba using Trend
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+Autoreq: 0
+%description vscan-trend
+A vfs-module for samba to implement on-access scanning using the
+Trend antivirus software (which must be installed to use this).
+%endif
%prep
-%setup
+
+# Allow users to query build options with --with options:
+#%define opt_status(%1) %(echo %{1})
+%if %{?_with_options:1}%{!?_with_options:0}
+%define opt_status(%{1}) %(if [ %{1} -eq 1 ];then echo enabled;else echo disabled;fi)
+#exit 1
+%{error: }
+%{error:Build options available are:}
+%{error:--with[out] system Build as the system samba package [or as samba3]}
+%{error:--with[out] acl Build with support for file ACLs - %opt_status %build_acl}
+%{error:--with[out] winbind Build with Winbind support - %opt_status %build_winbind}
+%{error:--with[out] wins Build with WINS name resolution support - %opt_status %build_wins}
+%{error:--with[out] ldap Build with legacy (samba2) LDAP support - %opt_status %build_ldap}
+%{error:--with[out] ads Build with Active Directory support - %opt_status %build_ads}
+%{error:--with[out] scanners Enable on-access virus scanners - %opt_status %build_scanners}
+%{error: }
+%else
+%{error: }
+%{error: This rpm has build options available, use --with options to see them}
+%{error: }
+%endif
+
+%if %{?_with_options:1}%{!?_with_options:0} && %build_scanners
+%{error:--with scanners enables fprot,mks,openav,sophos and trend by default}
+%{error: }
+%{error:To enable others (requires development libraries for the scanner):}
+%{error:--with kaspersky Enable on-access scanning with Kaspersky - %opt_status %build_kaspersky}
+%{error: }
+%endif
+
+%if %{?_with_options:1}%{!?_with_options:0}
+clear
+exit 1
+%endif
+
+
+%if %build_non_default
+RPM_EXTRA_OPTIONS="\
+%{?_with_system: --with system}\
+%{?_without_system: --without system}\
+%{?_with_acl: --with acl}\
+%{?_without_acl: --without acl}\
+%{?_with_winbind: --with winbind}\
+%{?_without_winbind: --without winbind}\
+%{?_with_wins: --with wins}\
+%{?_without_wins: --without wins}\
+%{?_with_ldap: --with ldap}\
+%{?_without_ldap: --without ldap}\
+%{?_with_ads: --with ads}\
+%{?_without_ads: --without ads}\
+%{?_with_scanners: --with scanners}\
+%{?_without_scanners: --without scanners}\
+"
+echo "Building a non-default rpm with the following command-line arguments:"
+echo "$RPM_EXTRA_OPTIONS"
+echo "This rpm was built with non-default options, thus, to build ">%{SOURCE7}
+echo "an identical rpm, you need to supply the following options">>%{SOURCE7}
+echo "at build time: $RPM_EXTRA_OPTIONS">>%{SOURCE7}
+echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7}
+%else
+echo "This rpm was built with default options">%{SOURCE7}
+echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7}
+%endif
+
+%if %build_vscan
+%setup -q -a 8 -n %{pkg_name}-%{source_ver}
+%else
+%setup -q -n %{pkg_name}-%{source_ver}
+%endif
+#%patch111 -p1
+%patch1 -p1 -b .smbw
+%patch2 -p1 -b .gawk
+%patch3 -p1 -b .buildroot
+%patch4 -p1 -b .sbin
+# Version specific patches: current version
+%if !%have_pversion
+echo "Applying patches for current version: %{ver}"
+%patch100 -p1 -b .mdk
+%else
+# Version specific patches: upcoming version
+echo "Applying patches for new versions: %{pversion}"
+%endif
+
+# Limbo patches
+%if %have_pversion && %have_pre
+echo "Appling patches which should only be applied to prereleases"
+%endif
+
+# Fix quota compilation in glibc>2.3
+%if %build_mdk91 || %build_mdk92
+#grep "<linux/quota.h>" source/smbd/quotas.c >/dev/null && \
+perl -pi -e 's@<linux/quota.h>@<sys/quota.h>@' source/smbd/quotas.c
+%endif
+
+cp %{SOURCE7} .
+
+# Make a copy of examples so that we have a clean one for doc:
+cp -a examples examples.bin
+
+%if %build_vscan
+cp -a %{vscandir} %{vfsdir}
+#fix stupid directory names:
+mv %{vfsdir}/%{vscandir}/openantivirus %{vfsdir}/%{vscandir}/oav
+%endif
+# Inline replacement of config dir
+for av in fprot kaspersky mks oav sophos trend; do
+ [ -e %{vfsdir}/%{vscandir}/$av/vscan-$av.h ] && perl -pi -e \
+ 's,^#define PARAMCONF "/etc/samba,#define PARAMCONF "/etc/%{name},' \
+ %{vfsdir}/%{vscandir}/$av/vscan-$av.h
+done
+#Inline edit vscan header:
+perl -pi -e 's/^# define SAMBA_VERSION_MAJOR 2/# define SAMBA_VERSION_MAJOR 3/g' %{vfsdir}/%{vscandir}/include/vscan-global.h
+
+# Edit some files when not building system samba:
+%if !%build_system
+perl -pi -e 's/%{pkg_name}/%{name}/g' source/auth/pampass.c
+%endif
%build
-cd source
-
-%ifarch ia64
-libtoolize --copy --force # get it to recognize IA-64
-autoconf
-autoheader
-EXTRA="-D_LARGEFILE64_SOURCE"
-%endif
-
-NUMCPU=`grep processor /proc/cpuinfo | wc -l`
-
-CFLAGS="$RPM_OPT_FLAGS $EXTRA" ./configure \
- --prefix=%{prefix} \
- --with-fhs \
- --libdir=/etc/samba \
- --localstatedir=/var \
- --with-codepagedir=%{prefix}/share/samba/codepages \
- --with-configdir=/etc/samba \
- --with-lockdir=/var/lock/samba \
- --with-swatdir=%{prefix}/share/swat \
- --with-quotas \
- --with-smbmount \
- --with-pam \
- --with-pam_smbpass \
- --with-syslog \
- --with-utmp \
- --with-netatalk \
- --with-sambabook=%{prefix}/share/swat/using_samba
-
-make -j${NUMCPU} proto
-make -j${NUMCPU} all smbfilter nsswitch/libnss_wins.so debug2html
+#%serverbuild
+(cd source
+CFLAGS="$RPM_OPT_FLAGS"
+# Don't use --with-fhs now, since it overrides libdir, it sets configdir,
+# lockdir,piddir logfilebase,privatedir and swatdir
+%configure --prefix=%{_prefix} \
+ --sysconfdir=/etc/%{name} \
+ --localstatedir=/var \
+ --libdir=%{_libdir}/%{name} \
+ --with-privatedir=/etc/%{name} \
+ --with-lockdir=/var/cache/%{name} \
+ --with-piddir=/var/run/%{name} \
+ --with-swatdir=%{_datadir}/swat%{samba_major} \
+ --with-configdir=/etc/%{name} \
+ --with-logfilebase=/var/log/%{name} \
+%if !%build_ads
+ --with-ads=no \
+%endif
+ --with-automount \
+ --with-smbmount \
+ --with-pam \
+ --with-pam_smbpass \
+%if %build_ldap
+ --with-ldapsam \
+%endif
+ --with-tdbsam \
+ --with-syslog \
+ --with-quotas \
+ --with-utmp \
+ --with-manpages-langs=en \
+%if %build_acl
+ --with-acl-support \
+%endif
+ --disable-mysqltest \
+ --with-expsam=%build_expsam \
+ --program-suffix=%{samba_major}
+# --with-shared-modules=pdb_ldap,idmap_ldap \
+# --with-manpages-langs=en,ja,pl \
+#_if !%build_system
+# --with-smbwrapper \
+#_endif
+# --with-nisplussam \
+# --with-fhs \
+
+#Fix the make file so we don't create debug information on 9.2
+%if %build_mdk92
+perl -pi -e 's/-g //g' Makefile
+%endif
+
+make proto_exists
+%make all libsmbclient smbfilter wins modules %{!?_without_test: torture debug2html} bin/editreg
+
+
+# Build VFS modules (experimental)
+#cd ../%vfsdir
+#_configure --prefix=%{prefix} \
+# --mandir=%{prefix}/share/man
+#make
+#make CFLAGS="$RPM_OPT_FLAGS -I../../source -I../../source/include -I../../source/ubiqx \
+# -I../../source/smbwrapper -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE"
+)
+
+# Build mkntpasswd in examples/LDAP/ for smbldaptools
+#(
+#cd examples.bin/LDAP/smbldap-tools/mkntpwd
+#make
+#)
+
+# Build antivirus vfs objects:
+%if %build_fprot
+echo -e "\n\nBuild antivirus VFS modules\n\n"
+echo "Building fprot"
+(cd %{vfsdir}/%{vscandir}/fprot;make)
+%endif
+%if %build_kaspersky
+echo "Building Kaspersky"
+(cd %{vfsdir}/%{vscandir}/kavp
+ perl -p -i -e "s|/usr/local/|/usr/|g" Makefile.KAV4
+ make -f Makefile.KAV4
+)
+%endif
+%if %build_mks
+echo "Building mks"
+(cd %{vfsdir}/%{vscandir}/mks;make)
+%endif
+%if %build_openav
+echo "Building OpenAntivirus"
+(cd %{vfsdir}/%{vscandir}/oav;make)
+%endif
+%if %build_sophos
+echo "building sophos"
+(cd %{vfsdir}/%{vscandir}/sophos;make)
+%endif
+%if %build_symantec
+echo "Building symantec"
+(cd %{vfsdir}/%{vscandir}/symantec;make)
+%endif
+%if %build_trend
+echo "Building Trend"
+(cd %{vfsdir}/%{vscandir}/trend;make)
+%endif
%install
rm -rf $RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/etc/{logrotate.d,pam.d,samba,xinetd.d}
-mkdir -p $RPM_BUILD_ROOT/etc/samba/security
-mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d
-mkdir -p $RPM_BUILD_ROOT/lib/security
-mkdir -p $RPM_BUILD_ROOT%{prefix}/{bin,sbin}
-mkdir -p $RPM_BUILD_ROOT/home/samba
+
+#Ensure all docs are readable
+chmod a+r docs -R
+
+# Any entries here mean samba makefile is *really* broken:
+mkdir -p $RPM_BUILD_ROOT/etc/%{name}
+mkdir -p $RPM_BUILD_ROOT/%{_datadir}
+mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs
+
+(cd source
+make DESTDIR=$RPM_BUILD_ROOT LIBDIR=%{_libdir}/%{name} install installclientlib installmodules)
+
+install -m755 source/bin/editreg %{buildroot}/%{_bindir}
+
+#need to stay
mkdir -p $RPM_BUILD_ROOT/sbin
-mkdir -p $RPM_BUILD_ROOT%{prefix}/share/swat/{images,help,include}
-mkdir -p $RPM_BUILD_ROOT%{prefix}/share/samba/codepages/src
-mkdir -p $RPM_BUILD_ROOT%{prefix}/share/swat/using_samba/{figs,gifs}
-mkdir -p $RPM_BUILD_ROOT%{prefix}/share/man/{man1,man5,man7,man8}
-mkdir -p $RPM_BUILD_ROOT/var/lock/samba
-mkdir -p $RPM_BUILD_ROOT/var/log/samba
-mkdir -p $RPM_BUILD_ROOT/var/spool/samba
-
-# Install standard binary files
-for i in nmblookup smbclient smbpasswd smbstatus testparm testprns \
- make_smbcodepage make_unicodemap make_printerdef rpcclient smbspool \
- smbmount smbumount smbmnt
-do
- install -m755 -s source/bin/$i $RPM_BUILD_ROOT%{prefix}/bin
-done
-for i in smbtar
-do
- install -m755 source/script/$i $RPM_BUILD_ROOT%{prefix}/bin
-done
+mkdir -p $RPM_BUILD_ROOT/etc/{logrotate.d,pam.d,xinetd.d}
+mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d
+mkdir -p $RPM_BUILD_ROOT/var/cache/%{name}
+mkdir -p $RPM_BUILD_ROOT/var/log/%{name}
+mkdir -p $RPM_BUILD_ROOT/var/run/%{name}
+mkdir -p $RPM_BUILD_ROOT/var/spool/%{name}
+mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/{netlogon,profiles,printers}
+mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/printers/{W32X86,WIN40,W32ALPHA,W32MIPS,W32PPC}
+mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/codepages/src
+mkdir -p $RPM_BUILD_ROOT/%{_lib}/security
+mkdir -p $RPM_BUILD_ROOT%{_libdir}
+mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts
-# Install secure binary files
-for i in smbd nmbd swat debug2html smbfilter
-do
- install -m755 -s source/bin/$i $RPM_BUILD_ROOT%{prefix}/sbin
-done
+#smbwrapper and pam_winbind not handled by make, pam_smbpass.so doesn't build
+#install -m 755 source/bin/smbwrapper.so $RPM_BUILD_ROOT%{_libdir}/smbwrapper%{samba_major}.so
+install -m 755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/%{_lib}/security/pam_smbpass%{samba_major}.so
+install -m 755 source/nsswitch/pam_winbind.so $RPM_BUILD_ROOT/%{_lib}/security/pam_winbind%{samba_major}.so
+
+install -m755 source/bin/libsmbclient.a $RPM_BUILD_ROOT%{_libdir}/libsmbclient.a
+
+# smbsh forgotten
+#install -m 755 source/bin/smbsh $RPM_BUILD_ROOT%{_bindir}/
-# we need a symlink for mount to recognise the smb and smbfs filesystem types
-ln -sf %{prefix}/bin/smbmount $RPM_BUILD_ROOT/sbin/mount.smbfs
-ln -sf %{prefix}/bin/smbmount $RPM_BUILD_ROOT/sbin/mount.smb
+# Install VFS modules
+#install -m755 %vfsdir/audit.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs
+#for i in block recycle
+#do
+# install -m755 %vfsdir/$i/$i.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs
+#done
-# Install codepage source files
-for i in 437 737 775 850 852 861 866 932 936 949 950 1251; do
- install -m644 source/codepages/codepage_def.$i $RPM_BUILD_ROOT%{prefix}/share/samba/codepages/src
+# Antivirus support:
+# mkdir -p $RPM_BUILD_ROOT%{_libdir}/samba/vfs/vscan
+ for av in fprot kavp mks oav sophos symantec trend; do
+ if [ -d %{vfsdir}/%{vscandir}/$av -a -e %{vfsdir}/%{vscandir}/$av/vscan-$av*.so ];then
+ cp %{vfsdir}/%{vscandir}/$av/vscan-$av*.so \
+ $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs/
+ cp %{vfsdir}/%{vscandir}/$av/vscan-$av*.conf \
+ $RPM_BUILD_ROOT%{_sysconfdir}/%{name}
+ fi
+ done
+
+#libnss_* not handled by make:
+# Install the nsswitch library extension file
+for i in wins winbind; do
+ install -m755 source/nsswitch/libnss_${i}.so $RPM_BUILD_ROOT/%{_lib}/libnss_${i}%{samba_major}.so
done
-for i in 437 737 850 852 861 866 932 936 949 950 ISO8859-1 ISO8859-2 ISO8859-5 ISO8859-7 KOI8-R; do
- install -m644 source/codepages/CP$i.TXT $RPM_BUILD_ROOT%{prefix}/share/samba/codepages/src
+# Make link for wins and winbind resolvers
+( cd $RPM_BUILD_ROOT/%{_lib}; ln -s libnss_wins%{samba_major}.so libnss_wins%{samba_major}.so.2; ln -s libnss_winbind%{samba_major}.so libnss_winbind%{samba_major}.so.2)
+
+%if %{?_without_test:0}%{!?_without_test:1}
+for i in smbtorture msgtest masktest locktest locktest2 nsstest vfstest debug2html;do
+ install -m755 source/bin/$i $RPM_BUILD_ROOT/%{_bindir}
done
+%endif
-# Install the nsswitch library extenstion file
-install -m755 source/nsswitch/libnss_wins.so $RPM_BUILD_ROOT/lib
-# Make link for wins resolver
-( cd $RPM_BUILD_ROOT/lib; ln -s libnss_wins.so libnss_wins.so.2; )
+# Install other stuff
-# PAM Authentication file
-install -m755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/lib/security
+# install -m644 examples/VFS/recycle/recycle.conf $RPM_BUILD_ROOT/etc/samba/
+ install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT/etc/%{name}/smbusers
+ install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT/%{_bindir}
+ #install -m755 packaging/RedHat/smbadduser $RPM_BUILD_ROOT/usr/bin
+ install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT/%{_bindir}
+ install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/etc/rc.d/init.d/smb%{samba_major}
+ install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_sbindir}/%{name}
+ install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/etc/rc.d/init.d/winbind%{samba_major}
+# install -m755 packaging/Mandrake/wrepld.init $RPM_BUILD_ROOT/etc/rc.d/init.d/wrepld%{samba_major}
+ install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_sbindir}/winbind%{samba_major}
+ install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/etc/pam.d/%{name}
+ install -m644 packaging/Mandrake/system-auth-winbind.pamd $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major}
+#
+ install -m644 %{SOURCE1} $RPM_BUILD_ROOT/etc/logrotate.d/%{name}
+# install -m644 packaging/Mandrake/samba-slapd-include.conf $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/samba-slapd.include
-# Install SWAT helper files
-for i in swat/help/*.html docs/htmldocs/*.html; do
- install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/help
-done
-for i in swat/images/*.gif; do
- install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/images
-done
-for i in swat/include/*.html; do
- install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/include
-done
+# Install smbldap-tools scripts:
+#for i in examples/LDAP/smbldap-tools/*.pl; do
+# install -m 750 $i $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
+#done
+
+#install -m 750 examples/LDAP/smbldap-tools/smbldap_tools.pm $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
+
+# The conf file
+#install -m 640 examples/LDAP/smbldap-tools/smbldap_conf.pm $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}
+
+# Link both smbldap*.pm into vendor-perl (any better ideas?)
+#mkdir -p %{buildroot}/%{perl_vendorlib}
+#ln -s %{_sysconfdir}/%{name}/smbldap_conf.pm $RPM_BUILD_ROOT/%{perl_vendorlib}
+#ln -s %{_datadir}/%{name}/scripts/smbldap_tools.pm $RPM_BUILD_ROOT/%{perl_vendorlib}
+
+#mkntpwd
+#install -m750 examples.bin/LDAP/smbldap-tools/mkntpwd/mkntpwd %{buildroot}/%{_sbindir}
+
+# Samba smbpasswd migration script:
+install -m700 examples/LDAP/export_smbpasswd.pl $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
+install -m700 examples/LDAP/import_smbpasswd.pl $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
+install -m755 examples/LDAP/convertSambaAccount $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
+
+
+
+# make a conf file for winbind from the default one:
+ cat packaging/Mandrake/smb.conf|sed -e 's/^; winbind/ winbind/g;s/^; obey pam/ obey pam/g; s/^; printer admin = @"D/ printer admin = @"D/g;s/^; password server = \*/ password server = \*/g;s/^; template/ template/g; s/^ security = user/ security = domain/g' > packaging/Mandrake/smb-winbind.conf
+ install -m644 packaging/Mandrake/smb-winbind.conf $RPM_BUILD_ROOT/etc/%{name}/smb-winbind.conf
+
+# Some inline fixes for smb.conf for non-winbind use
+install -m644 packaging/Mandrake/smb.conf $RPM_BUILD_ROOT/etc/%{name}/smb.conf
+cat packaging/Mandrake/smb.conf | \
+sed -e 's/^; printer admin = @adm/ printer admin = @adm/g' >$RPM_BUILD_ROOT/etc/%{name}/smb.conf
+%if %build_cupspc
+perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/etc/%{name}/smb.conf
+perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/etc/%{name}/smb-winbind.conf
+%endif
+
+# Link smbmount to /sbin/mount.smb and /sbin/mount.smbfs
+#I don't think it's possible for make to do this ...
+(cd $RPM_BUILD_ROOT/sbin
+ ln -s ..%{_bindir}/smbmount%{samba_major} mount.smb%{samba_major}
+ ln -s ..%{_bindir}/smbmount%{samba_major} mount.smbfs%{samba_major}
+)
+ echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/etc/%{name}/lmhosts
+
+# Link smbspool to CUPS (does not require installed CUPS)
+
+ mkdir -p $RPM_BUILD_ROOT/%{_libdir}/cups/backend
+ ln -s %{_bindir}/smbspool $RPM_BUILD_ROOT/%{_libdir}/cups/backend/smb%{samba_major}
+
+# xinetd support
+
+ mkdir -p $RPM_BUILD_ROOT/etc/xinetd.d
+ install -m644 %{SOURCE3} $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major}
+
+# menu support
+
+mkdir -p $RPM_BUILD_ROOT%{_menudir}
+cat > $RPM_BUILD_ROOT%{_menudir}/%{name}-swat << EOF
+?package(%{name}-swat):\
+command="gnome-moz-remote http://localhost:901/" \
+needs="gnome" \
+icon="swat%{samba_major}.png" \
+section="Configuration/Networking" \
+title="Samba Configuration (SWAT)" \
+longtitle="The Swat Samba Administration Tool"
+?package(%{name}-swat):\
+command="sh -c '\$BROWSER http://localhost:901/'" \
+needs="x11" \
+icon="swat%{samba_major}.png" \
+section="Configuration/Networking" \
+title="Samba Configuration (SWAT)" \
+longtitle="The Swat Samba Administration Tool"
+EOF
-# This is the O'Reily Samba Book - on-line
-for i in docs/htmldocs/using_samba/*.html; do
- install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/using_samba
+mkdir -p $RPM_BUILD_ROOT%{_liconsdir} $RPM_BUILD_ROOT%{_iconsdir} $RPM_BUILD_ROOT%{_miconsdir}
+
+bzcat %{SOURCE4} > $RPM_BUILD_ROOT%{_liconsdir}/swat%{samba_major}.png
+bzcat %{SOURCE5} > $RPM_BUILD_ROOT%{_iconsdir}/swat%{samba_major}.png
+bzcat %{SOURCE6} > $RPM_BUILD_ROOT%{_miconsdir}/swat%{samba_major}.png
+
+bzcat %{SOURCE10}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/print-pdf
+
+# Fix configs when not building system samba:
+%if !%build_system
+# Work around non-existent but claimed --program-suffix support :-(
+for dir in %{_sbindir} %{_bindir};do
+ FILES=`find %{buildroot}$dir -type f |grep -v "\."|grep -v %{samba_major}$`
+ for OLD in $FILES; do
+ NEW=`echo ${OLD}%{samba_major}`
+ mv $OLD $NEW
+ done
done
-for i in docs/htmldocs/using_samba/figs/*.gif; do
- install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/using_samba/figs
+# And the man pages too:
+FILES=`find %{buildroot}%{_mandir} -type f `
+for OLD in $FILES; do
+ BASE=`perl -e '$name="'${OLD}'"; print "",($name =~ /(.*?)\.[0-9]/), "\n";'`
+ EXT=`echo $OLD|sed -e 's,'${BASE}',,g'`
+ NEW=`echo ${BASE}%{samba_major}${EXT}`
+ mv $OLD $NEW
+done
+# Replace paths in config files and init scripts:
+for i in smb winbind;do
+ perl -pi -e 's,/subsys/'$i',/subsys/'$i'%{samba_major},g' $RPM_BUILD_ROOT/etc/rc.d/init.d/${i}%{samba_major}
done
-for i in docs/htmldocs/using_samba/gifs/*.gif; do
- install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/using_samba/gifs
+for i in /etc/%{name}/smb.conf /etc/rc.d/init.d/smb%{samba_major} %{_sbindir}/%{name} /etc/rc.d/init.d/winbind%{samba_major} %{_sbindir}/winbind%{samba_major} /etc/logrotate.d/%{name} /etc/xinetd.d/swat%{samba_major} /etc/rc.d/init.d/wrepld%{samba_major}; do
+ perl -pi -e 's,/%{pkg_name},/%{name},g; s,smbd,%{_sbindir}/smbd%{samba_major},g; s,nmbd,%{_sbindir}/nmbd%{samba_major},g; s,winbindd,%{_sbindir}/winbindd%{samba_major},g; s,/usr/sbin/swat,%{_sbindir}/swat%{samba_major},g;s,wrepld,%{_sbindir}/wrepld%{samba_major},g' $RPM_BUILD_ROOT/$i;
done
+# Fix pam files
+perl -pi -e 's/winbind/winbind%{samba_major}/g' $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major}
+# Fix xinetd file for swat:
+perl -pi -e 's,/usr/sbin,%{_sbindir},g' $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major}
+%endif
-# Install the miscellany
-install -m644 swat/README $RPM_BUILD_ROOT%{prefix}/share/swat
-# Install level 1 man pages
-for i in *.1; do
- install -m644 docs/manpages/$i $RPM_BUILD_ROOT%{prefix}/share/man/man1
+#Clean up unpackaged files:
+for i in %{_bindir}/pam_smbpass.so %{_bindir}/smbwrapper.so;do
+rm -f %{buildroot}/$i
done
-install -m644 docs/manpages/smb.conf.5 $RPM_BUILD_ROOT%{prefix}/share/man/man5
-install -m644 docs/manpages/lmhosts.5 $RPM_BUILD_ROOT%{prefix}/share/man/man5
-install -m644 docs/manpages/smbpasswd.5 $RPM_BUILD_ROOT%{prefix}/share/man/man5
-
-install -m644 docs/manpages/samba.7 $RPM_BUILD_ROOT%{prefix}/share/man/man7
-
-install -m644 docs/manpages/smbd.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-install -m644 docs/manpages/nmbd.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-install -m644 docs/manpages/smbpasswd.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-install -m644 docs/manpages/swat.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-install -m644 docs/manpages/smbmount.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-install -m644 docs/manpages/smbmnt.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-install -m644 docs/manpages/smbumount.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-install -m644 docs/manpages/smbspool.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-
-install -m644 swat/README $RPM_BUILD_ROOT%{prefix}/share/swat
-
-install -m644 packaging/Mandrake/smb.con* $RPM_BUILD_ROOT/etc/samba/
-install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT/etc/samba/smbusers
-install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT%{prefix}/bin
-install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT%{prefix}/bin
-install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/etc/rc.d/init.d/smb
-install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT%{prefix}/sbin/samba
-install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/etc/pam.d/samba
-install -m644 packaging/Mandrake/samba.log $RPM_BUILD_ROOT/etc/logrotate.d/samba
-install -m644 packaging/Mandrake/samba.xinetd $RPM_BUILD_ROOT/etc/xinetd.d/swat
-echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/etc/samba/lmhosts
-
-##
-## remove these directories so they don't get installed twice
-##
-/bin/rm -rf docs/htmldocs
-/bin/rm -rf docs/manpages
-
%clean
rm -rf $RPM_BUILD_ROOT
-%post
-/sbin/chkconfig --add smb
-/sbin/chkconfig smb off
+%post server
+
+%_post_service smb%{samba_major}
+#%_post_service wrepld%{samba_major}
+
+# Add a unix group for samba machine accounts
+groupadd -frg 421 machines
-# Build codepage load files
-cd %{prefix}/share/samba/codepages
-for i in 437 737 775 850 852 861 866 932 936 949 950 1251
+# Migrate tdb's from /var/lock/samba (taken from official samba spec file):
+for i in /var/lock/samba/*.tdb
do
-%{prefix}/bin/make_smbcodepage c $i %{prefix}/share/samba/codepages/src/codepage_def.$i %{prefix}/share/samba/codepages/codepage.$i
+if [ -f $i ]; then
+ newname=`echo $i | sed -e's|var\/lock\/samba|var\/cache\/samba|'`
+ echo "Moving $i to $newname"
+ mv $i $newname
+fi
done
-for i in 437 737 850 852 861 866 932 936 949 950 ISO8859-1 ISO8859-2 ISO8859-5 ISO8859-7 KOI8-R
-do
-%{prefix}/bin/make_unicodemap $i %{prefix}/share/samba/codepages/src/CP$i.TXT %{prefix}/share/samba/codepages/unicode_map.$i
+
+# Remove the transient tdb files (modified from version in off. samba spec:
+for TDB in brlock unexpected locking messages; do
+ if [ -e /var/cache/%{name}/$TDB.tdb ]; then
+ rm -f /var/cache/%{name}/$TDB.tdb;
+ fi;
done
-# Add swat entry to /etc/services if not already there
-if !( grep ^[:space:]*swat /etc/services > /dev/null ) then
- echo 'swat 901/tcp # Add swat service used via inetd' >> /etc/services
+if [ -d /var/lock/samba ]; then
+ rm -rf /var/lock/samba
fi
-%preun
-if [ $1 = 0 ] ; then
- /sbin/chkconfig --del smb
+%post common
+# Basic migration script for pre-2.2.1 users,
+# since smb config moved from /etc to /etc/samba
+
+# Let's create a proper /etc/samba/smbpasswd file
+[ -f /etc/%{name}/smbpasswd ] || {
+ echo "Creating password file for samba..."
+ touch /etc/%{name}/smbpasswd
+}
+
+# And this too, in case we don't have smbd to create it for us
+[ -f /var/cache/%{name}/unexpected.tdb ] || {
+ touch /var/cache/%{name}/unexpected.tdb
+}
+
+# Let's define the proper paths for config files
+perl -pi -e 's/(\/etc\/)(smb)/\1%{name}\/\2/' /etc/%{name}/smb.conf
- # We want to remove the browse.dat file
- if [ -e /var/lock/samba/browse.dat ]; then
- rm -f /var/lock/samba/browse.dat
+# Let's replace lpstat with cups in older smb.conf:
+%if %build_cupspc
+echo "Updating samba printing configuration if necessary..."
+perl -pi -e 's/= lpstat/= cups/' /etc/%{name}/smb.conf
+%endif
+
+# Fix the logrotate.d file from smb and nmb to smbd and nmbd
+if [ -f /etc/logrotate.d/samba ]; then
+ perl -pi -e 's/smb /smbd /' /etc/logrotate.d/samba
+ perl -pi -e 's/nmb /nmbd /' /etc/logrotate.d/samba
+fi
+
+# And not loose our machine account SID
+[ -f /etc/MACHINE.SID ] && mv -f /etc/MACHINE.SID /etc/%{name}/ ||:
+
+%if %build_winbind
+%post winbind
+if [ $1 = 1 ]; then
+ /sbin/chkconfig winbind%{samba_major} on
+ cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave
+ cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp
+ for i in passwd group;do
+ grep ^$i /etc/nsswitch.conf |grep -v 'winbind%{samba_major}' >/dev/null
+ if [ $? = 0 ];then
+ echo "Adding a winbind%{samba_major} entry to the $i section of /etc/nsswitch.conf"
+ awk '/^'$i'/ {print $0 " winbind%{samba_major}"};!/^'$i'/ {print}' /etc/nsswitch.conf.rpmtemp >/etc/nsswitch.conf;
+ cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp
+ else
+ echo "$i entry found in /etc/nsswitch.conf"
+ fi
+ done
+ if [ -f /etc/nsswitch.conf.rpmtemp ];then rm -f /etc/nsswitch.conf.rpmtemp;fi
+fi
+
+%preun winbind
+if [ $1 = 0 ]; then
+ echo "Removing winbind%{samba_major} entries from /etc/nsswitch.conf"
+ perl -pi -e 's/ winbind%{samba_major}//' /etc/nsswitch.conf
+
+ /sbin/chkconfig winbind%{samba_major} reset
+fi
+%endif %build_winbind
+
+%if %build_wins
+%post -n nss_wins%{samba_major}
+if [ $1 = 1 ]; then
+ cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave
+ grep '^hosts' /etc/nsswitch.conf |grep -v 'wins%{samba_major}' >/dev/null
+ if [ $? = 0 ];then
+ echo "Adding a wins entry to the hosts section of /etc/nsswitch.conf"
+ awk '/^hosts/ {print $0 " wins%{samba_major}"};!/^hosts/ {print}' /etc/nsswitch.conf.rpmsave >/etc/nsswitch.conf;
+ else
+ echo "wins entry found in /etc/nsswitch.conf"
fi
+# else
+# echo "Upgrade, leaving nsswitch.conf intact"
fi
-%postun
-# Only delete remnants of samba if this is the final deletion.
+%preun -n nss_wins%{samba_major}
+if [ $1 = 0 ]; then
+ echo "Removing wins entry from /etc/nsswitch.conf"
+ perl -pi -e 's/ wins%{samba_major}//' /etc/nsswitch.conf
+#else
+# echo "Leaving /etc/nsswitch.conf intact"
+fi
+%endif %build_wins
+
+%preun server
+
+%_preun_service smb%{samba_major}
+#%_preun_service wrepld%{samba_major}
+
if [ $1 = 0 ] ; then
- if [ -x /etc/pam.d/samba ]; then
- rm -f /etc/pam.d/samba
- fi
- if [ -e /var/log/samba ]; then
- rm -rf /var/log/samba
+# /sbin/chkconfig --level 35 smb reset
+# Let's not loose /var/cache/samba
+
+# for i in browse.dat wins.dat brlock.tdb unexpected.tdb connections.tdb \
+#locking.tdb messages.tdb;do
+# if [ -e /var/cache/samba/$i ]; then
+# mv -f /var/cache/samba/$i /var/cache/samba/$i.BAK
+# fi;
+# done
+ if [ -d /var/log/%{name} ]; then
+ rm -rf /var/log/%{name}/*
fi
- if [ -e /var/lock/samba ]; then
- rm -rf /var/lock/samba
+ if [ -d /var/cache/%{name} ]; then
+ mv -f /var/cache/%{name} /var/cache/%{name}.BAK
fi
+fi
+
+%post swat
+if [ -f /var/lock/subsys/xinetd ]; then
+ service xinetd reload >/dev/null 2>&1 || :
+fi
+%update_menus
+
+%postun swat
- # Remove swat entries from /etc/inetd.conf and /etc/services
- cd /etc
- tmpfile=/etc/tmp.$$
- sed -e '/^[:space:]*swat.*$/d' /etc/services > $tmpfile
- mv $tmpfile services
+# Remove swat entry from xinetd
+if [ $1 = 0 -a -f /etc/xinetd.conf ] ; then
+rm -f /etc/xinetd.d/swat%{samba_major}
+ service xinetd reload &>/dev/null || :
fi
-%triggerpostun -- samba < samba-2.0.0
-if [ $0 != 0 ]; then
- /sbin/chkconfig --add smb
+if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
+
+%clean_menus
+
+%triggerpostun -- samba < 1.9.18p7
+
+if [ $1 != 0 ]; then
+ /sbin/chkconfig --level 35 smb on
+fi
+
+%triggerpostun -- samba < 2.0.5a-3, samba >= 2.0.0
+
+if [ $1 != 0 ]; then
+ [ ! -d /var/lock/samba ] && mkdir -m 0755 /var/lock/samba ||:
+ [ ! -d /var/spool/samba ] && mkdir -m 1777 /var/spool/samba ||:
+ [ -f /etc/inetd.conf ] && chmod 644 /etc/services /etc/inetd.conf ||:
fi
-%files
+%files server
+%defattr(-,root,root)
+#%attr(-,root,root) /sbin/*
+%{_sbindir}/%{name}
+%{_sbindir}/smbd%{samba_major}
+%{_sbindir}/nmbd%{samba_major}
+#%{_sbindir}/wrepld%{samba_major}
+%{_bindir}/smbcontrol%{samba_major}
+#%{_sbindir}/mkntpwd
+%{_bindir}/smbstatus%{samba_major}
+%{_bindir}/pdbedit%{samba_major}
+%{_bindir}/tdbbackup%{samba_major}
+%{_bindir}/profiles%{samba_major}
+%{_bindir}/editreg%{samba_major}
+%attr(755,root,root) /%{_lib}/security/pam_smbpass*
+%dir %{_libdir}/%{name}/vfs
+%{_libdir}/%{name}/vfs/*.so
+%dir %{_libdir}/%{name}/pdb
+
+#/usr/share/swat
+%attr(-,root,root) %config(noreplace) /etc/%{name}/smbusers
+%attr(-,root,root) %config %{_initrddir}/smb%{samba_major}
+#%attr(-,root,root) %config %{_initrddir}/wrepld%{samba_major}
+%attr(-,root,root) %config(noreplace) /etc/logrotate.d/%{name}
+%attr(-,root,root) %config(noreplace) /etc/pam.d/%{name}
+#%attr(-,root,root) %config(noreplace) /etc/%{name}/samba-slapd.include
+%{_mandir}/man1/smbstatus*.1*
+%{_mandir}/man5/smbpasswd*.5*
+%{_mandir}/man7/samba*.7*
+%{_mandir}/man8/smbd*.8*
+%{_mandir}/man8/nmbd*.8*
+%{_mandir}/man8/pdbedit*.8*
+%{_mandir}/man1/smbcontrol*.1*
+%{_mandir}/man8/tdbbackup*.8*
+%{_mandir}/man1/profiles*.1*
+%{_mandir}/man1/editreg*.1*
+%attr(775,root,root) %dir %{_localstatedir}/%{name}/netlogon
+%attr(775,root,root) %dir %{_localstatedir}/%{name}/profiles
+%attr(775,root,root) %dir %{_localstatedir}/%{name}/printers
+%attr(1777,root,root) %dir /var/spool/%{name}
+%dir %{_datadir}/%{name}
+%dir %{_datadir}/%{name}/scripts
+%attr(0755,root,root) %{_datadir}/%{name}/scripts/print-pdf
+#%attr(0750,root,root) %{_datadir}/%{name}/scripts/smbldap*.pl
+#%attr(0640,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smbldap_conf.pm
+#%attr(0644,root,root) %{_datadir}/%{name}/scripts/smbldap_tools.pm
+#%{perl_vendorlib}/*.pm
+%attr(0700,root,root) %{_datadir}/%{name}/scripts/*port_smbpasswd.pl
+%attr(0755,root,root) %{_datadir}/%{name}/scripts/convertSambaAccount
+
+
+%files doc
+%defattr(-,root,root)
%doc README COPYING Manifest Read-Manifest-Now
%doc WHATSNEW.txt Roadmap
+%doc README.%{name}-mandrake-rpm
%doc docs
-%doc swat/README
%doc examples
-%attr(-,root,root) %{prefix}/sbin/*
-%attr(-,root,root) /sbin/*
-%attr(-,root,root) %{prefix}/bin/*
-%attr(755,root,root) /lib/*
-%attr(-,root,root) %{prefix}/share/swat/help/*
-%attr(-,root,root) %{prefix}/share/swat/images/*
-%attr(-,root,root) %{prefix}/share/swat/include/*
-%attr(-,root,root) %{prefix}/share/swat/using_samba/*
-%attr(-,root,root) %config(noreplace) /etc/samba/lmhosts
-%attr(-,root,root) %config(noreplace) /etc/samba/smb.conf
-%attr(-,root,root) %config(noreplace) /etc/samba/smbusers
-%attr(-,root,root) /etc/rc.d/init.d/smb
-%attr(-,root,root) /etc/logrotate.d/samba
-%attr(-,root,root) %config(noreplace) /etc/pam.d/samba
-%attr(-,root,root) %{prefix}/share/man/man1/*
-%attr(-,root,root) %{prefix}/share/man/man5/*
-%attr(-,root,root) %{prefix}/share/man/man7/*
-%attr(-,root,root) %{prefix}/share/man/man8/*
-%attr(-,root,root) %dir /etc/samba/
-%attr(-,root,root) %dir /usr/share/samba/codepages/*
-%attr(-,root,root) %dir /usr/share/samba/codepages/src/*
-%attr(-,root,root) %dir /var/lock/samba
-%attr(-,root,root) %dir /var/log/samba
-%attr(1777,root,root) %dir /var/spool/samba
+%doc swat/README
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/using_samba/*
+
+%files swat
+%defattr(-,root,root)
+%config(noreplace) /etc/xinetd.d/swat%{samba_major}
+#%attr(-,root,root) /sbin/*
+%{_sbindir}/swat%{samba_major}
+%{_menudir}/%{name}-swat
+%{_miconsdir}/*.png
+%{_liconsdir}/*.png
+%{_iconsdir}/*.png
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/help/*
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/images/*
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/include/*
+%lang(ja) %{_datadir}/swat%{samba_major}/lang/ja
+%lang(tr) %{_datadir}/swat%{samba_major}/lang/tr
+%{_mandir}/man8/swat*.8*
+
+%files client
+%defattr(-,root,root)
+%ifnarch alpha
+/sbin/mount.smb%{samba_major}
+/sbin/mount.smbfs%{samba_major}
+%attr(755,root,root) %{_bindir}/smbmount%{samba_major}
+%attr(4755,root,root) %{_bindir}/smbumount%{samba_major}
+%attr(4755,root,root) %{_bindir}/smbmnt%{samba_major}
+%{_mandir}/man8/smbmnt*.8*
+%{_mandir}/man8/smbmount*.8*
+%{_mandir}/man8/smbumount*.8*
+%else
+%exclude %{_bindir}/smb*m*nt%{samba_major}
+%exclude %{_mandir}/man8/smb*m*nt*.8*
+%endif
+%{_bindir}/nmblookup%{samba_major}
+%{_bindir}/findsmb%{samba_major}
+%{_bindir}/smbclient%{samba_major}
+%{_bindir}/smbprint%{samba_major}
+%{_bindir}/smbtar%{samba_major}
+%{_bindir}/smbspool%{samba_major}
+# Link of smbspool to CUPS
+/%{_libdir}/cups/backend/smb%{samba_major}
+/%{_mandir}/man1/nmblookup*.1*
+/%{_mandir}/man1/findsmb*.1*
+/%{_mandir}/man1/smbclient*.1*
+/%{_mandir}/man1/smbtar*.1*
+/%{_mandir}/man8/smbspool*.8*
+
+%files common
+%defattr(-,root,root)
+%dir /var/cache/%{name}
+%dir /var/log/%{name}
+%dir /var/run/%{name}
+#%{_bindir}/make_smbcodepage
+#%{_bindir}/make_unicodemap
+%{_bindir}/testparm%{samba_major}
+%{_bindir}/testprns%{samba_major}
+#%{_bindir}/make_printerdef
+%{_bindir}/rpcclient%{samba_major}
+#%{_bindir}/smbsh%{samba_major}
+%{_bindir}/smbpasswd%{samba_major}
+%{_bindir}/smbcacls%{samba_major}
+%{_bindir}/smbcquotas%{samba_major}
+%{_bindir}/net%{samba_major}
+%{_bindir}/smbtree%{samba_major}
+%{_bindir}/ntlm_auth%{samba_major}
+#%{_libdir}/smbwrapper%{samba_major}.so
+%dir %{_libdir}/%{name}
+%{_libdir}/%{name}/*.dat
+#%{_libdir}/%{name}/lowcase.dat
+#%{_libdir}/%{name}/valid.dat
+%dir %{_sysconfdir}/%{name}
+%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smb.conf
+%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smb-winbind.conf
+%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/lmhosts
+%dir %{_localstatedir}/%{name}
+%attr(-,root,root) %{_localstatedir}/%{name}/codepages
+#%{_mandir}/man1/make_smbcodepage*.1*
+#%{_mandir}/man1/make_unicodemap*.1*
+%{_mandir}/man1/testparm*.1*
+%{_mandir}/man1/rpcclient*.1*
+%{_mandir}/man1/testprns*.1*
+%{_mandir}/man5/smb.conf*.5*
+%{_mandir}/man5/lmhosts*.5*
+%{_mandir}/man8/smbpasswd*.8*
+%{_mandir}/man1/smbcacls*.1*
+%{_mandir}/man1/smbcquotas*.1*
+%{_mandir}/man8/net*.8*
+%{_mandir}/man1/smbtree*.1*
+%{_mandir}/man1/ntlm_auth*.1*
+%{_mandir}/man7/Samba*.7*
+
+%if %build_winbind
+%files winbind
+%defattr(-,root,root)
+%{_sbindir}/winbindd%{samba_major}
+%{_sbindir}/winbind%{samba_major}
+%{_bindir}/wbinfo%{samba_major}
+%attr(755,root,root) /%{_lib}/security/pam_winbind*
+%attr(755,root,root) /%{_lib}/libnss_winbind%{samba_major}*
+%attr(-,root,root) %config /etc/rc.d/init.d/winbind%{samba_major}
+%attr(-,root,root) %config(noreplace) /etc/pam.d/system-auth-winbind*
+%{_mandir}/man8/winbindd*.8*
+%{_mandir}/man1/wbinfo*.1*
+%endif
+
+%if %build_wins
+%files -n nss_wins%{samba_major}
+%defattr(-,root,root)
+%attr(755,root,root) /%{_lib}/libnss_wins%{samba_major}.so*
+%endif
+
+%if %{?_without_test:0}%{!?_without_test:1}
+%files test
+%defattr(-,root,root)
+%{_bindir}/debug2html%{samba_major}
+%{_bindir}/smbtorture%{samba_major}
+%{_bindir}/msgtest%{samba_major}
+%{_bindir}/masktest%{samba_major}
+%{_bindir}/locktest%{samba_major}
+%{_bindir}/locktest2%{samba_major}
+%{_bindir}/nsstest%{samba_major}
+%{_bindir}/vfstest%{samba_major}
+%{_mandir}/man1/vfstest%{samba_major}*.1*
+%else
+%exclude %{_mandir}/man1/vfstest%{samba_major}*.1*
+%endif
+
+%if %build_system
+%files -n libsmbclient%{libsmbmajor}
+%defattr(-,root,root)
+%{_libdir}/libsmbclient.so*
+%else
+%exclude %{_libdir}/libsmbclient.so*
+%endif
+
+%if %build_system
+%files -n libsmbclient%{libsmbmajor}-devel
+%defattr(-,root,root)
+%{_includedir}/*
+%else
+%exclude %{_includedir}/*
+%endif
+
+%if %build_system
+%files -n libsmbclient%{libsmbmajor}-static-devel
+%defattr(-,root,root)
+%{_libdir}/libsmbclient.a
+%else
+%exclude %{_libdir}/libsmbclient.a
+%endif
+
+#%files passdb-ldap
+#%defattr(-,root,root)
+#%{_libdir}/%{name}/*/*ldap.so
+
+%ifnarch alpha
+%files passdb-mysql
+%defattr(-,root,root)
+%{_libdir}/%{name}/pdb/*mysql.so
+%endif
+
+%files passdb-xml
+%defattr(-,root,root)
+%{_libdir}/%{name}/pdb/*xml.so
+
+#Files for antivirus support:
+%if %build_fprot
+%files vscan-fprot
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-fprotd.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-fprotd.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+
+%if %build_kaspersky
+%files vscan-kaspersky
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-kavp.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-kavp.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+
+%if %build_mks
+%files vscan-mks
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-mksd.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-mks*.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+
+%if %build_openav
+%files vscan-openav
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-oav.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-oav.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+
+%if %build_sophos
+%files vscan-sophos
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-sophos.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-sophos.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+
+%if %build_symantec
+%files vscan-symantec
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-symantec.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-symantec.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+
+%if %build_trend
+%files vscan-trend
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-trend.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-trend.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+
+%exclude %{_mandir}/man1/smbsh*.1*
+
+%changelog
+* Mon Jul 14 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta2.3mdk
+- place non-conditional excludes at the end of files list, to prevent causing
+ rpm in Mandrake <=8.2 from segfaulting when processing files.
+- Update default config
+
+* Wed Jul 02 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta2.2mdk
+- 3.0.0beta2
+- manually build editreg
+- Add some new man pages
+
+* Tue Jun 10 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta1.3mdk
+- add provision for passdb-ldap subpackage (it doesn't build like that yet)
+- avoid debugging info on cooker/9.2 for the moment
+- We probably don't need to autoconf (and can thus build on 8.1)
+- We can probably build without kerberos support (and thus on 8.0)
+- Don't require mysql-devel on alpha's (maybe we want to be able to disable
+ mysql support for other arches?)
+- We shouldn't need to specifically add openssl to include path, since ssl
+ support is deprecated.
+- png icons, change menu title to not conflict with ksambaplugin
+- update to samba-vscan-0.3.3beta1, but it still does not build the vscan
+ modules.
+- add -static-devel package
+- Add buildrequires for lib packages that are picked up if installed
+ (ncurses, popt) in an attempt to get slbd to build samba3
+- Fix default config (P100)
+
+* Sun Jun 08 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta1.2mdk
+- Get packages into cooker (klama doesn't want to build this package ..)
+- samba-vscan-0.3.2b
+
+* Fri Jun 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha24.2mdk
+- Rename debug package to test and other fixes for rpm-4.2
+- prepare for beta1
+
+* Wed Apr 30 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha24.1mdk
+- Remove some files removed upstream
+- In builds from source, don't terminate on missing docs or unpackaged files
+ (if only we could do it for other missing files ...)
+
+* Mon Apr 28 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha24.0mdk
+- Reenable debug package by (--without debug to not build it), fixed post-a23
+- Add bugzilla note for builds from source (also intended for packages made
+ available on samba FTP site) at samba team request
+- Fix build from CVS (run autogen.sh, pass options to all rpm commands)
+- Appease distriblint, but not much to be done about /usr/share/swat3/ since
+ samba-doc owns some subdirs, and samba-swat others, and they can be installed
+ independantly.
+- Apply kaspersky vscan build fix from samba2
+- Final for alpha24
+
+* Wed Apr 23 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha23.3mdk
+- Small fixes in preparation for testing as system samba
+- Make debug package optional (--with debug) since it's often broken
+- Add support for 9.2 (including in-line smbd quota patch for glibc2.3)
+- Add --with options option, which will just show you the available options and exit
+
+* Sun Apr 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha23.2mdk
+- Alpha23
+- buildrequire autconf2.5
+- samba-vscan 0.3.2a
+- Remove patch 102 (upstreamed)
+
+* Thu Mar 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha22.2mdk
+- Alpha22
+- Add profiles binary to server and ntlm_auth to common
+- smbwrapper and torture target broken (only in 9.0?)
+- remove unused source 2
+
+* Tue Mar 04 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha21.4mdk
+- Don't provide samba-{server,client,common} when not system samba (bug #2617)
+- Don't build libsmbclient packages when not system samba
+- Fix conflict between samba-server and samba3-server (pam_smbpass)
+- Fix smbwrapper (from 2.2.7a-5mdk for bug #2356)
+- Fix codepage/charset example (bug #1574)
+
+* Thu Jan 23 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha21.3mdk
+- samba-vscan 0.3.1 (and make it build again), including required inline edits
+- Make all vscan packages provide samba(3)-vscan
+- Build all vscan except kav (requires kaspersky lib) with --with-scanners
+- Add vscan-(scanner).conf files
+- Explicitly add ldapsam for 2.2 compatability when building --with ldap,
+ default build now uses new ldap passdb backend (ie you always get ldap)
+- Enable (experimental) tdb passdb backend
+- Fix file ownership conflicts between server and common
+- Cleanup configure, to match order of --help
+- Fix libdir location, was being overridden by --with-fhs
+- Split off a libsmbclient and -devel package
+- Add wins replication init script (patch 102)
+- Workaround passdb/pdb_xml.c not compiling
+- Workaround missing install targets for smbsh/smbwrapper.so in cvs
+- Inline patch smbd/quotas.c for Mandrake >9.0
+
+* Wed Nov 27 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha21.2mdk
+- Remove patch 20,21,22,23,25,26 (upstream)
+- New destdir patch from cvs (18)
+- package installed but non-packaged files
+- new debug subpackage for vfstest and related files (it was that or nuke the
+ manpage ;-))
+- use _libdir for libdir instead of _sysconfdir
+- Update samba-vscan (untested)
+
+* Mon Oct 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.3mdk
+- Fix mount.smbfs3 pointing to smbmount not in package
+- Remove unnecessary lines from install (now done by make)
+- Build with ldap and ads on all releases by default
+- Put av-stuff back
+
+* Mon Oct 21 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.2mdk
+- When not building as system samba, avoid conflicting with system samba
+- Macro-ize as much as possible for above (aka finish cleanups)
+- Fix paths in init scripts and logrotate and xinetd
+- Fix provides and obsoletes so as to provide samba, but not obsolete
+ current stable until we have a stable release (when it's the system samba).
+- Add warnings to descriptions when not system samba.
+- This is now parallel installable with the normal samba release, for easy
+ testing. It shouldn't touch existing installations. Of course, only
+ one samba at a time on the same interface!
+
+* Sat Sep 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.1mdk
+- Merge with 2.2.6pre2.2mdk
+- Detect alpha- and beta-, along with pre-releases
+
+* Tue Feb 05 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.1mdk
+- Sync with 2.2.3-2mdk (new --without options, detect when
+ building for a different distribution.
+
+* Mon Feb 04 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.0mdk
+- Sync with 2.2.2-10mdk, which added build-time options --with ldap,
+ winbind, acl, wins, mdk72, mdk80, mdk81, mdk82, cooker. Added
+ warning in description if built with these options.
+
+* Wed Jan 23 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.2mdk
+- Added if's for build_ads, which hopefully will add Active Directory
+ Support (by request).
+
+* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.1mdk
+- More syncing with 2.2 rpm (post and postun scripts)
+- Testing without ldap
+
+* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.0mdk
+- 3.0-alpha13
+- Fixed installman.sh patch.
+
+* Wed Jan 09 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.1mdk
+- Fixed %post and %preun for nss_wins, added %post and %preun for
+ samba-winbind (chkconfig and winbind entries in nsswitch.conf)
+
+* Sun Dec 23 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.0mdk
+- 3.0-alpha12
+- Sync up with changes made in 2.2.2 to support Mandrake 8.0, 7.2
+- Added new subpackage for swat
+- More if's for ldap.
+
+* Thu Dec 20 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha11-0.0mdk
+- 3.0-alpha11
+
+* Wed Dec 19 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha10-0.0mdk
+- 3.0-alpha10
+
+* Tue Dec 18 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha9-0.0mdk
+- 3.0-alpha9
+
+* Mon Dec 17 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.1mdk
+- Added net command to %files common, pdbedit and smbgroupedit to
+ %files, s/%{prefix}\/bin/%{_bindir}/ (the big cleanup).
+ Added patch to smb.init from 2.2.2 (got missed with 3.0-alpha1 patches)
+
+* Sun Dec 16 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.0mdk
+- Patch for installman.sh to handle lang=en correctly (p24)
+- added --with-manpages-langs=en,ja,pl (translated manpages), but there
+ aren't any manpages for these languages yet ... so we still
+ need %dir and %doc entries for them ...
+- patch (p25) to configure.in to support more than 2 languages.
+- addtosmbpass seems to have returned for now, but make_* have disappeared!
+
+* Fri Dec 14 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha6-0.0mdk
+- DESTDIR patch for Makefile.in (p23), remove a lot of %%install scripts
+ this forces move of smbcontrol and smbmnt to %{prefix}/bin
+ removed --with-pam_smbpass as it doesn't compile.
+
+* Thu Dec 06 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-0.0alpha1mdk
+- Samba 3.0alpha1 released (we missed Samba 3.0alpha0!)
+- Redid smbmount-sbin patch and smb.conf patch (20), removed xfs quota patch
+ (applied upstream), removed ook-patch (codepage directory totally different).
+- Added winbind.init (21) and system-auth-winbind.pamd (22). Patches 20-23
+ should be applied upstream before 3.0 ships ...
+
+* Wed Dec 05 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-6mdk
+- fixed typo in system-auth-winbind.pamd (--Thanks J. Gluck).
+- fixed %post xxx problem (smb not started in chkconfig --Thanks Viet & B. Kenworthy).
+
+* Fri Nov 23 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-5mdk
+- Had to remove the network recycle bin patch: it seems to mess up
+ file deletion from windows (files appear to be "already in use")
+
+* Tue Nov 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-4mdk
+- added network recycle bin patch:
+ <http://www.amherst.edu/~bbstone/howto/samba.html>
+- added "recycle bin = .recycled" parameter in smb.conf [homes].
+- fixed winbind/nss_wins perms (oh no I don't own that stuff ;o)
+
+* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-3mdk
+- added %build 8.0 and 7.2, for tweakers to play around.
+- changed configure options:
+ . removed --with-mmap, --with-netatalk (obsolete).
+ . added --with-msdfs, --with-vfs (seems stable, but still need testing).
+
+* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-2mdk
+- rebuilt with winbind and nss_wins enabled.
+
+* Wed Oct 31 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-1mdk
+- Rebuilt on cooker.
+
+* Wed Oct 31 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.992mdk
+- Patch for smb.conf to fix incorrect lpq command, typo in winbind,
+ and add sample linpopup command. Added print driver directories.
+- New XFS quota patch (untested!, samba runs, but do quotas work? We
+ can't check yet since the kernel doesn't seem to support XFS quotas!)
+
+* Fri Oct 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-0.99mdk
+- New samba.spec, almost ready for winbind operations. OLA for Buchan Milne
+ Who did a tremendous integration work on 2.2.2.
+ Rebuild on cooker, please test XFS (ACLs and quotas) again...
+
+* Mon Oct 15 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.9mdk
+- Samba-2.2.2. released! Use %defines to determine which subpackages
+ are built and which Mandrake release we are buiding on/for (hint: define
+ build_mdk81 1 for Mandrake 8.1 updates)
+
+* Sun Oct 14 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011014mdk
+- %post and %postun for nss_wins
+
+* Wed Oct 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011010mdk
+- New CVS snapshot, /etc/pam.d/system-auth-winbind added
+ with configuration to allow easy winbind setup.
+
+* Sun Oct 7 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011007mdk
+- Added new package nss_wins and moved smbpasswd to common (required by
+ winbind).
+
+* Sat Oct 6 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011006mdk
+- Added new package winbind.
+
+* Mon Oct 1 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011001mdk
+- Removed patch to smb init.d file (applied in cvs)
+
+* Sun Sep 30 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010930mdk
+- Added winbind init script, which still needs to check for running nmbd.
+
+* Thu Sep 27 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010927mdk
+- Built from samba-2.2.2-pre cvs, added winbindd, wbinfo, nss_winbind and
+ pam_winbind, moved pam_smbpass from samba-common to samba. We still
+ need a start-up script for winbind, or need to modify existing one.
+
+* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-15mdk
+- Enabled acl support (XFS acls now supported by kernel-2.4.8-21mdk thx Chmou)
+ Added smbd patch to support XFS quota (Nathan Scott)
+
+* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-14mdk
+- Oops! smbpasswd created in wrong directory...
+
+* Tue Sep 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-13mdk
+- Removed a wrong comment in smb.conf.
+ Added creation of smbpasswd during install.
+
+* Mon Aug 27 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-12mdk
+- really less verbose %%post
+
+* Sat Aug 25 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1a-11mdk
+- Fix shared libs in /usr/bin silliness.
+
+* Thu Aug 23 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-10mdk
+- less verbose %%post
+
+* Wed Aug 22 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-9mdk
+- Added smbcacls (missing in %files), modification to smb.conf: ([printers]
+ is still needed, even with point-and-print!, user add script should
+ use name and not gid, since we may not get the gid . New script for
+ putting manpages in place (still need to be added in %files!). Moved
+ smbcontrol to sbin and added it and its man page to %files.
+
+* Wed Aug 22 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-8mdk
+- cleanup /var/lib/samba/codepage/src
+
+* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-7mdk
+- moved codepage generation to %%install and codepage dir to /var/lib/samba
+
+* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-6mdk
+- /lib/* was in both samba and samba-common
+ Introducing samba-doc: "alas, for the sake of thy modem, shalt thou remember
+ when Samba was under the Megabyte..."
+
+* Fri Aug 03 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-5mdk
+- Added "the gc touch" to smbinit through the use of killall -0 instead of
+ grep cupsd | grep -v grep (too many greps :o)
+
+* Wed Jul 18 2001 Stefan van der Eijk <stefan@eijk.nu> 2.2.1a-4mdk
+- BuildRequires: libcups-devel
+- Removed BuildRequires: openssl-devel
+
+* Fri Jul 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-3mdk
+- replace chkconfig --add/del with --level 35 on/reset.
+
+* Fri Jul 13 2001 Geoffrey Lee <snailtalk@mandrakesoft.cm> 2.2.1a-2mdk
+- Replace discription s/inetd/xinetd/, we all love xinetd, blah.
+
+* Thu Jul 12 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-1mdk
+- Bugfix release. Fixed add user script, added print$ share and printer admin
+ We need to test interaction of new print support with CUPS, but printer
+ driver uploads should work.
+
+* Wed Jul 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-17mdk
+- fixed smb.conf a bit, rebuilt on cooker.
+
+* Tue Jul 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-16mdk
+- Finally, samba 2.2.1 has actually been release. At least we were ready!
+ Cleaned up smb.conf, and added some useful entries for domain controlling.
+ Migrated changes made in samba's samba2.spec for 2.2.1 to this file.
+ Added groupadd command in post to create a group for samba machine accounts.
+ (We should still check the postun, samba removes pam, logs and cache)
+
+* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-15mdk
+- fixed smbwrapper compile options.
+
+* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-14mdk
+- added LFS support.
+ added smbwrapper support (smbsh)
+
+* Wed Jun 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-13mdk
+- /sbin/mount.smb and /sbin/mount.smbfs now point to the correct location
+ of smbmount (/usr/bin/smbmount)
+
+* Tue Jun 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-12mdk
+- smbmount and smbumount are now in /usr/bin and SUID.
+ added ||: to triggerpostun son you don't get error 1 anymore when rpm -e
+ Checked the .bz2 sources with file *: everything is OK now (I'm so stupid ;o)!
+
+* Tue Jun 19 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1-11mdk
+- s/Copyright/License/;
+- Stop Sylvester from pretending .gz source to be .bz2 source via filename
+ aka really bzip2 the source.
+
+* Mon Jun 18 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-10mdk
+- changed Till's startup script modifications: now samba is being reloaded
+ automatically 1 minute after it has started (same reasons as below in 9mdk)
+ added _post_ and _preun_ for service smb
+ fixed creation of /var/lib/samba/{netlogon,profiles} (%dir was missing)
+
+* Thu Jun 14 2001 Till Kamppeter <till@mandrakesoft.com> 2.2.1-9mdk
+- Modified the Samba startup script so that in case of CUPS being used as
+ printing system Samba only starts when the CUPS daemon is ready to accept
+ requests. Otherwise the CUPS queues would not appear as Samba shares.
+
+* Mon Jun 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-8mdk
+- patched smbmount.c to have it call smbmnt in sbin (thanks Seb).
+
+* Wed May 30 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-7mdk
+- put SWAT menu icons back in place.
+
+* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-6mdk
+- OOPS! fixed smbmount symlinks
+
+* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-5mdk
+- removed inetd postun script, replaced with xinetd.
+ updated binary list (smbcacls...)
+ cleaned samba.spec
+
+* Mon May 28 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-4mdk
+- Changed configure options to point to correct log and codepage directories,
+ added crude script to fix logrotate file for new log file names, updated
+ patches to work with current CVS.
+
+* Thu May 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-3mdk
+- Cleaned and updated the %files section.
+
+* Sat May 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-2mdk
+- Moved all samba files from /etc to /etc/samba (Thanks DomS!).
+ Fixed fixinit patch (/etc/samba/smb.conf)
+
+* Fri May 18 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-1mdk
+- Now use packaging/Mandrake/smb.conf, removed unused and obsolete
+ patches, moved netlogon and profile shares to /var/lib/samba in the
+ smb.conf to match the spec file. Added configuration for ntlogon to
+ smb.conf. Removed pam-foo, fixinit and makefilepath patches. Removed
+ symlink I introduced in 2.2.0-1mdk
+
+* Thu May 3 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-5mdk
+- Added more configure options. Changed Description field (thx John T).
+
+* Wed Apr 25 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-4mdk
+- moved netlogon and profiles to /var/lib/samba by popular demand ;o)
+
+* Tue Apr 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-3mdk
+- moved netlogon and profiles back to /home.
+
+* Fri Apr 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-2mdk
+- fixed post inetd/xinetd script&
+
+* Thu Apr 19 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.0-1mdk
+- Upgrade to 2.2.0. Merged most of 2.0.7-25mdk's patches (beware
+ nasty "ln -sf samba-%{ver} ../samba-2.0.7" hack to force some patches
+ to take. smbadduser and addtosmbpass seem to have disappeared. Moved
+ all Mandrake-specific files to packaging/Mandrake and made patches
+ from those shipped with samba. Moved netlogon to /home/samba and added
+ /home/samba/profiles. Added winbind,smbfilter and debug2html to make command.
+
+* Thu Apr 12 2001 Frederic Crozat <fcrozat@mandrakesoft.com> 2.0.7-25mdk
+- Fix menu entry and provide separate menu entry for GNOME
+ (nautilus doesn't support HTTP authentication yet)
+- Add icons in package
+
+* Fri Mar 30 2001 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-24mdk
+- use new server macros
+
+* Wed Mar 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-23mdk
+- check whether /etc/inetd.conf exists (upgrade) or not (fresh install).
+
+* Thu Mar 15 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-22mdk
+- spec cosmetics, added '-r' option to lpr-cups command line so files are
+ removed from /var/spool/samba after printing.
+
+* Tue Mar 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-21mdk
+- merged last rh patches.
+
+* Thu Nov 23 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-20mdk
+- removed dependencies on cups and cups-devel so one can install samba without using cups
+- added /home/netlogon
+
+* Mon Nov 20 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-19mdk
+- Changed default print command in /etc/smb.conf, so that the Windows
+ driver of the printer has to be used on the client.
+- Fixed bug in smbspool which prevented from printing from a
+ Linux-Samba-CUPS client to a Windows server through the guest account.
+
+* Mon Oct 16 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-18mdk
+- Moved "smbspool" (Samba client of CUPS) to the samba-client package
+
+* Sat Oct 7 2000 Stefan van der Eijk <s.vandereijk@chello.nl> 2.0.7-17mdk
+- Added RedHat's "quota" patch to samba-glibc21.patch.bz2, this fixes
+ quota related compile problems on the alpha.
+
+* Wed Oct 4 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-16mdk
+- Fixed 'guest ok = ok' flag in smb.conf
+
+* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-15mdk
+- Allowed guest account to print in smb.conf
+- added swat icon in menu
+
+* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-14mdk
+- Removed rh ssl patch and --with-ssl flag: not appropriate for 7.2
+
+* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-13mdk
+- Changed fixinit patch.
+- Changed smb.conf for better CUPS configuration.
+- Thanks Fred for doing this ---vvv.
+
+* Tue Oct 3 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-12mdk
+- menu entry for web configuration tool.
+- merge with rh: xinetd + ssl + pam_stack.
+- Added smbadduser rh-bugfix w/o relocation of config-files.
+
+* Mon Oct 2 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-11mdk
+- added build requires on cups-devel and pam-devel.
+
+* Mon Oct 2 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-10mdk
+- Fixed smb.conf entry for CUPS: "printcap name = lpstat", "lpstats" was
+ wrong.
+
+* Mon Sep 25 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-9mdk
+- Cosmetic changes to make rpmlint more happy
+
+* Wed Sep 11 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-8mdk
+- added linkage to the using_samba book in swat
+
+* Fri Sep 01 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-7mdk
+- Added CUPS support to smb.conf
+- Added internationalization options to smb.conf [Global]
+
+* Wed Aug 30 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-6mdk
+- Put "smbspool" to the files to install
+
+* Wed Aug 30 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-5mdk
+- Did some cleaning in the patches
+
+* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-4mdk
+- relocated man pages from /usr/man to /usr/share/man for compatibility reasons
+
+* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-3mdk
+- added make_unicodemap and build of unicode_map.$i in the spec file
+
+* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-2mdk
+- renamed /etc/codepage/codepage.$i into /etc/codepage/unicode_map.$i to fix smbmount bug.
+
+* Fri Jul 07 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-1mdk
+- 2.0.7
+
+* Wed Apr 05 2000 Francis Galiegue <fg@mandrakesoft.com> 2.0.6-4mdk
+
+- Titi sucks, does not put versions in changelog
+- Fixed groups for -common and -client
+- /usr/sbin/samba is no config file
+
+* Thu Mar 23 2000 Thierry Vignaud <tvignaud@mandrakesoft.com>
+- fix buggy post install script (pixel)
+
+* Fri Mar 17 2000 Francis Galiegue <francis@mandrakesoft.com> 2.0.6-2mdk
+
+- Changed group according to 7.1 specs
+- Some spec file changes
+- Let spec-helper do its job
+
+* Thu Nov 25 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- 2.0.6.
+
+* Tue Nov 2 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- Merge with rh changes.
+- Split in 3 packages.
+
+* Fri Aug 13 1999 Pablo Saratxaga <pablo@@mandrakesoft.com>
+- corrected a bug with %post (the $1 parameter is "1" in case of
+ a first install, not "0". That parameter is the number of packages
+ of the same name that will exist after running all the steps if nothing
+ is removed; so it is "1" after first isntall, "2" for a second install
+ or an upgrade, and "0" for a removal)
+
+* Wed Jul 28 1999 Pablo Saratxaga <pablo@@mandrakesoft.com>
+- made smbmnt and smbumount suid root, and only executable by group 'smb'
+ add to 'smb' group any user that should be allowed to mount/unmount
+ SMB shared directories
+
+* Fri Jul 23 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- 2.0.5a (bug security fix).
+
+* Wed Jul 21 1999 Axalon Bloodstone <axalon@linux-mandrake.com>
+- 2.0.5
+- cs/da/de/fi/fr/it/tr descriptions/summaries
+
+* Sun Jun 13 1999 Bernhard Rosenkränzer <bero@mandrakesoft.com>
+- 2.0.4b
+- recompile on a system that works ;)
+
+* Wed Apr 21 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- Mandrake adaptations.
+- Bzip2 man-pages.
+
+* Fri Mar 26 1999 Bill Nottingham <notting@redhat.com>
+- add a mount.smb to make smb mounting a little easier.
+- smb filesystems apparently do not work on alpha. Oops.
+
+* Thu Mar 25 1999 Bill Nottingham <notting@redhat.com>
+- always create codepages
+
+* Tue Mar 23 1999 Bill Nottingham <notting@redhat.com>
+- logrotate changes
+
+* Sun Mar 21 1999 Cristian Gafton <gafton@redhat.com>
+- auto rebuild in the new build environment (release 3)
+
+* Fri Mar 19 1999 Preston Brown <pbrown@redhat.com>
+- updated init script to use graceful restart (not stop/start)
+
+* Tue Mar 9 1999 Bill Nottingham <notting@redhat.com>
+- update to 2.0.3
+
+* Thu Feb 18 1999 Bill Nottingham <notting@redhat.com>
+- update to 2.0.2
+
+* Mon Feb 15 1999 Bill Nottingham <notting@redhat.com>
+- swat swat
+
+* Tue Feb 9 1999 Bill Nottingham <notting@redhat.com>
+- fix bash2 breakage in post script
+
+* Fri Feb 5 1999 Bill Nottingham <notting@redhat.com>
+- update to 2.0.0
+
+* Mon Oct 12 1998 Cristian Gafton <gafton@redhat.com>
+- make sure all binaries are stripped
+
+* Thu Sep 17 1998 Jeff Johnson <jbj@redhat.com>
+- update to 1.9.18p10.
+- fix %triggerpostun.
+
+* Tue Jul 07 1998 Erik Troan <ewt@redhat.com>
+- updated postun triggerscript to check $0
+- clear /etc/codepages from %preun instead of %postun
+
+* Mon Jun 08 1998 Erik Troan <ewt@redhat.com>
+- made the %postun script a tad less agressive; no reason to remove
+ the logs or lock file (after all, if the lock file is still there,
+ samba is still running)
+- the %postun and %preun should only exectute if this is the final
+ removal
+- migrated %triggerpostun from Red Hat's samba package to work around
+ packaging problems in some Red Hat samba releases
+* Sun Apr 26 1998 John H Terpstra <jht@samba.anu.edu.au>
+- minor tidy up in preparation for release of 1.9.18p5
+- added findsmb utility from SGI package
+* Wed Mar 18 1998 John H Terpstra <jht@samba.anu.edu.au>
+- Updated version and codepage info.
+- Release to test name resolve order
+* Sat Jan 24 1998 John H Terpstra <jht@samba.anu.edu.au>
+- Many optimisations (some suggested by Manoj Kasichainula <manojk@io.com>
+- Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb
+- Compounded make line
+- Updated smb.init restart mechanism
+- Use compound mkdir -p line instead of individual calls to mkdir
+- Fixed smb.conf file path for log files
+- Fixed smb.conf file path for incoming smb print spool directory
+- Added a number of options to smb.conf file
+- Added smbadduser command (missed from all previous RPMs) - Doooh!
+- Added smbuser file and smb.conf file updates for username map
git.samba.org / garming / samba-autobuild / .git / blobdiff