s3: Add parameter "ctdb timeout"
authorVolker Lendecke <vl@samba.org>
Tue, 3 Nov 2009 04:41:02 +0000 (05:41 +0100)
committerVolker Lendecke <vl@samba.org>
Thu, 5 Nov 2009 11:05:36 +0000 (12:05 +0100)
When something in the cluster blocks, it can happen that we wait indefinitely
long for ctdb, just adding to the blocking condition. In theory, nothing should
block, but as someone said "In practice the difference between theory and
practice is larger than in theory". This adds a timeout parameter in seconds,
after which we stop waiting for ctdb and panic.

docs-xml/smbdotconf/misc/ctdbtimeout.xml [new file with mode: 0644]
source3/include/packet.h
source3/include/proto.h
source3/lib/ctdbd_conn.c
source3/lib/packet.c
source3/param/loadparm.c

diff --git a/docs-xml/smbdotconf/misc/ctdbtimeout.xml b/docs-xml/smbdotconf/misc/ctdbtimeout.xml
new file mode 100644 (file)
index 0000000..97d5039
--- /dev/null
@@ -0,0 +1,37 @@
+<samba:parameter name="ctdb timeout"
+                 context="G"
+                                type="integer"
+                 advanced="1"
+                 xmlns:samba="http://www.samba.org/samba/DTD/samba-doc">
+<description>
+       <para>This parameter specifies a timeout in seconds for the
+         connection between Samba and ctdb. It is only valid if you
+         have compiled Samba with clustering and if you have
+         set <parameter>clustering=yes</parameter>.
+       </para>
+       <para>When something in the cluster blocks, it can happen that
+         we wait indefinitely long for ctdb, just adding to the
+         blocking condition. In a well-running cluster this should
+         never happen, but there are too many components in a cluster
+         that might have hickups. Choosing the right balance for this
+         value is very tricky, because on a busy cluster long service
+         times to transfer something across the cluster might be
+         valid. Setting it too short will degrade the service your
+         cluster presents, setting it too long might make the cluster
+         itself not recover from something severely broken for too
+         long.
+       </para>
+       <para>
+         Be aware that if you set this parameter, this needs to be in
+         the file smb.conf, it is not really helpful to put this into
+         a registry configuration (typical on a cluster), because to
+         access the registry contact to ctdb is requred.
+       </para>
+       <para>Setting <parameter>ctdb timeout</parameter> to n makes
+         any process waiting longer than n seconds for a reply by the
+         cluster panic. Setting it to 0 (the default) makes Samba
+         block forever, which is the highly recommended default.
+       </para>
+</description>
+<value type="default">0</value>
+</samba:parameter>
index 03331da7503d64abb571df9c20f8f0c6b0347258..45a9bc2ef19dec3cfb94b3b781f3661328047114 100644 (file)
@@ -38,7 +38,8 @@ NTSTATUS packet_fd_read(struct packet_context *ctx);
 /*
  * Sync read, wait for the next chunk
  */
-NTSTATUS packet_fd_read_sync(struct packet_context *ctx);
+NTSTATUS packet_fd_read_sync(struct packet_context *ctx,
+                            struct timeval *timeout);
 
 /*
  * Handle an incoming packet:
index 6a90c87f84ab692a3ffb9699df54a753cbecb4f5..d08ed79050d41d81b7554a60c5e4ee2e0e623481 100644 (file)
@@ -4130,6 +4130,7 @@ int lp_cups_connection_timeout(void);
 const char *lp_ctdbd_socket(void);
 const char **lp_cluster_addresses(void);
 bool lp_clustering(void);
+int lp_ctdb_timeout(void);
 char *lp_printcommand(int );
 char *lp_lpqcommand(int );
 char *lp_lprmcommand(int );
index ffd79c9fe1d50fa62f6e818d4e8dfd4d89289f84..84bba3bea35c21e9c1b98d6f9ad81e3ba932bab9 100644 (file)
@@ -275,6 +275,17 @@ static struct messaging_rec *ctdb_pull_messaging_rec(TALLOC_CTX *mem_ctx,
        return result;
 }
 
+static NTSTATUS ctdb_packet_fd_read_sync(struct packet_context *ctx)
+{
+       struct timeval timeout;
+       struct timeval *ptimeout;
+
+       timeout = timeval_set(lp_ctdb_timeout(), 0);
+       ptimeout = (timeout.tv_sec != 0) ? &timeout : NULL;
+
+       return packet_fd_read_sync(ctx, ptimeout);
+}
+
 /*
  * Read a full ctdbd request. If we have a messaging context, defer incoming
  * messages that might come in between.
@@ -289,7 +300,7 @@ static NTSTATUS ctdb_read_req(struct ctdbd_connection *conn, uint32 reqid,
 
  again:
 
-       status = packet_fd_read_sync(conn->pkt);
+       status = ctdb_packet_fd_read_sync(conn->pkt);
 
        if (NT_STATUS_EQUAL(status, NT_STATUS_NETWORK_BUSY)) {
                /* EAGAIN */
@@ -1156,7 +1167,7 @@ NTSTATUS ctdbd_traverse(uint32 db_id,
                        break;
                }
 
-               status = packet_fd_read_sync(conn->pkt);
+               status = ctdb_packet_fd_read_sync(conn->pkt);
 
                if (NT_STATUS_EQUAL(status, NT_STATUS_RETRY)) {
                        /*
index ef28bf9f625b53b0f8ef214eaf1e0ac3fe9262d4..c131b973bc3f525e5dbfda71277360b59bbc48b6 100644 (file)
@@ -101,7 +101,8 @@ NTSTATUS packet_fd_read(struct packet_context *ctx)
        return NT_STATUS_OK;
 }
 
-NTSTATUS packet_fd_read_sync(struct packet_context *ctx)
+NTSTATUS packet_fd_read_sync(struct packet_context *ctx,
+                            struct timeval *timeout)
 {
        int res;
        fd_set r_fds;
@@ -109,7 +110,12 @@ NTSTATUS packet_fd_read_sync(struct packet_context *ctx)
        FD_ZERO(&r_fds);
        FD_SET(ctx->fd, &r_fds);
 
-       res = sys_select(ctx->fd+1, &r_fds, NULL, NULL, NULL);
+       res = sys_select(ctx->fd+1, &r_fds, NULL, NULL, timeout);
+
+       if (res == 0) {
+               DEBUG(10, ("select timed out\n"));
+               return NT_STATUS_IO_TIMEOUT;
+       }
 
        if (res == -1) {
                DEBUG(10, ("select returned %s\n", strerror(errno)));
index 06fb9625761d94e7e49fea57ed5a81391f33c257..c62deb5eda5948e59ef214293423968114ea2310 100644 (file)
@@ -271,6 +271,7 @@ struct global {
        char *ctdbdSocket;
        char **szClusterAddresses;
        bool clustering;
+       int ctdb_timeout;
        int ldap_passwd_sync;
        int ldap_replication_sleep;
        int ldap_timeout; /* This is initialised in init_globals */
@@ -2541,6 +2542,15 @@ static struct parm_struct parm_table[] = {
                .enum_list      = NULL,
                .flags          = FLAG_ADVANCED | FLAG_GLOBAL,
        },
+       {
+               .label          = "ctdb timeout",
+               .type           = P_INTEGER,
+               .p_class        = P_GLOBAL,
+               .ptr            = &Globals.ctdb_timeout,
+               .special        = NULL,
+               .enum_list      = NULL,
+               .flags          = FLAG_ADVANCED | FLAG_GLOBAL,
+       },
 
        {N_("Printing Options"), P_SEP, P_SEPARATOR},
 
@@ -5107,6 +5117,7 @@ static void init_globals(bool first_time_only)
        string_set(&Globals.ctdbdSocket, "");
        Globals.szClusterAddresses = NULL;
        Globals.clustering = False;
+       Globals.ctdb_timeout = 0;
 
        Globals.winbind_cache_time = 300;       /* 5 minutes */
        Globals.winbind_reconnect_delay = 30;   /* 30 seconds */
@@ -5557,6 +5568,7 @@ FN_GLOBAL_INTEGER(lp_cups_connection_timeout, &Globals.cups_connection_timeout)
 FN_GLOBAL_CONST_STRING(lp_ctdbd_socket, &Globals.ctdbdSocket)
 FN_GLOBAL_LIST(lp_cluster_addresses, &Globals.szClusterAddresses)
 FN_GLOBAL_BOOL(lp_clustering, &Globals.clustering)
+FN_GLOBAL_INTEGER(lp_ctdb_timeout, &Globals.ctdb_timeout)
 FN_LOCAL_STRING(lp_printcommand, szPrintcommand)
 FN_LOCAL_STRING(lp_lpqcommand, szLpqcommand)
 FN_LOCAL_STRING(lp_lprmcommand, szLprmcommand)