first pass at updating head branch to be to be the same as the SAMBA_2_0 branch
[bbaumbach/samba-autobuild/.git] / docs / textdocs / Application_Serving.txt
1 !==
2 !== Application_Serving.txt for Samba release 2.0.4 18 May 1999
3 !==
4 Contributed:    January 7, 1997
5 Updated:        March 24, 1998
6 Contributor:    John H Terpstra <samba-bugs@samba.org>
7                 Copyright (C) 1997 - John H Terpstra
8 Status:         Current
9
10 Subject: Using a Samba share as an administrative share for MS Office, etc.
11 ==============================================================================
12
13 Problem:
14 ========
15 Microsoft Office products can be installed as an administrative installation
16 from which the application can either be run off the administratively installed
17 product that resides on a shared resource, or from which that product can be
18 installed onto workstation clients.
19
20 The general mechanism for implementing an adminstrative installation involves
21 running:
22         X:\setup /A, where X is the drive letter of either CDROM or floppy
23
24 This installation process will NOT install the product for use per se, but
25 rather results in unpacking of the compressed distribution files into a target
26 shared folder. For this process you need write privilidge to the share and it
27 is desirable to enable file locking and share mode operation during this
28 process.
29
30 Subsequent installation of MS Office from this share will FAIL unless certain
31 precautions are taken. This failure will be caused by share mode operation
32 which will prevent the MS Office installation process from re-opening various
33 dynamic link library files and will cause sporadic file not found problems.
34
35 Solution:
36 =========
37 1. As soon as the administrative installation (unpacking) has completed
38         set the following parameters on the share containing it:
39         [MSOP95]
40                 path = /where_you_put_it
41                 comment = Your comment
42                 volume = "The_CD_ROM_Label"
43                 read only = yes
44                 available = yes
45                 share modes = no
46                 locking = no
47                 browseable = yes
48                 public = yes
49
50 2. Now you are ready to run the setup program from the Microsoft Windows
51 workstation as follows:-
52         \\"Server_Name"\MSOP95\msoffice\setup
53
54 MS Office Sharing - Please note:
55 ================================
56
57 Workgroup Templates should be stored on an ordinary writable or read-only share
58 but USER templates MUST be stored on a writable share _OR_ on the users' local
59 machine.