selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub have_ads($) {
  15         my ($self) = @_;
  16         my $found_ads = 0;
  17         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  18         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  19
  20         while (<IN>) {
  21                 if (/WITH_ADS/) {
  22                        $found_ads = 1;
  23                 }
  24         }
  25         close IN;
  26
  27         # If we were not built with ADS support, pretend we were never even available
  28         print "smbd does not have ADS support\n" unless $found_ads;
  29         return $found_ads;
  30 }
  31
  32 # return smb.conf parameters applicable to @path, based on the underlying
  33 # filesystem type
  34 sub get_fs_specific_conf($$)
  35 {
  36         my ($self, $path) = @_;
  37         my $mods = "";
  38         my $stat_out = `stat --file-system $path` or return "";
  39
  40         if ($stat_out =~ m/Type:\s+btrfs/) {
  41                 $mods .= "btrfs ";
  42         }
  43
  44         if ($mods) {
  45                 return "vfs objects = $mods";
  46         }
  47
  48         return undef;
  49 }
  50
  51 sub new($$) {
  52         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  53         my $self = { vars => {},
  54                      bindir => $bindir,
  55                      srcdir => $srcdir,
  56                      server_maxtime => $server_maxtime
  57         };
  58         bless $self;
  59         return $self;
  60 }
  61
  62 sub teardown_env($$)
  63 {
  64         my ($self, $envvars) = @_;
  65         my $count = 0;
  66
  67         # This should cause smbd to terminate gracefully
  68         close($envvars->{STDIN_PIPE});
  69
  70         my $smbdpid = $envvars->{SMBD_TL_PID};
  71         my $nmbdpid = $envvars->{NMBD_TL_PID};
  72         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  73
  74         # This should give it time to write out the gcov data
  75         until ($count > 20) {
  76             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  77             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  78             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  79             if ($smbdchild == -1
  80                 && $nmbdchild == -1
  81                 && $winbinddchild == -1) {
  82                 last;
  83             }
  84             sleep(1);
  85             $count++;
  86         }
  87
  88         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  89             return;
  90         }
  91
  92         $self->stop_sig_term($smbdpid);
  93         $self->stop_sig_term($nmbdpid);
  94         $self->stop_sig_term($winbinddpid);
  95
  96         $count = 0;
  97         until ($count > 10) {
  98             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  99             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 100             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 101             if ($smbdchild == -1
 102                 && $nmbdchild == -1
 103                 && $winbinddchild == -1) {
 104                 last;
 105             }
 106             sleep(1);
 107             $count++;
 108         }
 109
 110         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 111             return;
 112         }
 113
 114         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 115         $self->stop_sig_kill($smbdpid);
 116         $self->stop_sig_kill($nmbdpid);
 117         $self->stop_sig_kill($winbinddpid);
 118
 119         return 0;
 120 }
 121
 122 sub getlog_env_app($$$)
 123 {
 124         my ($self, $envvars, $name) = @_;
 125
 126         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 127         my $out = $title;
 128
 129         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 130
 131         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 132         while (<LOG>) {
 133                 $out .= $_;
 134         }
 135         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 136         close(LOG);
 137
 138         return "" if $out eq $title;
 139
 140         return $out;
 141 }
 142
 143 sub getlog_env($$)
 144 {
 145         my ($self, $envvars) = @_;
 146         my $ret = "";
 147
 148         $ret .= $self->getlog_env_app($envvars, "SMBD");
 149         $ret .= $self->getlog_env_app($envvars, "NMBD");
 150         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 151
 152         return $ret;
 153 }
 154
 155 sub check_env($$)
 156 {
 157         my ($self, $envvars) = @_;
 158
 159         my $childpid = waitpid(-1, WNOHANG);
 160
 161         # TODO ...
 162         return 1;
 163 }
 164
 165 sub setup_env($$$)
 166 {
 167         my ($self, $envname, $path) = @_;
 168
 169         $ENV{ENVNAME} = $envname;
 170
 171         if (defined($self->{vars}->{$envname})) {
 172                 return $self->{vars}->{$envname};
 173         }
 174
 175         #
 176         # Avoid hitting system krb5.conf -
 177         # An env that needs Kerberos will reset this to the real
 178         # value.
 179         #
 180         $ENV{KRB5_CONFIG} = "$path/no_krb5.conf";
 181
 182         if ($envname eq "nt4_dc") {
 183                 return $self->setup_nt4_dc("$path/nt4_dc");
 184         } elsif ($envname eq "nt4_dc_schannel") {
 185                 return $self->setup_nt4_dc_schannel("$path/nt4_dc_schannel");
 186         } elsif ($envname eq "simpleserver") {
 187                 return $self->setup_simpleserver("$path/simpleserver");
 188         } elsif ($envname eq "fileserver") {
 189                 return $self->setup_fileserver("$path/fileserver");
 190         } elsif ($envname eq "maptoguest") {
 191                 return $self->setup_maptoguest("$path/maptoguest");
 192         } elsif ($envname eq "ktest") {
 193                 return $self->setup_ktest("$path/ktest");
 194         } elsif ($envname eq "nt4_member") {
 195                 if (not defined($self->{vars}->{nt4_dc})) {
 196                         if (not defined($self->setup_nt4_dc("$path/nt4_dc"))) {
 197                                 return undef;
 198                         }
 199                 }
 200                 return $self->setup_nt4_member("$path/nt4_member", $self->{vars}->{nt4_dc});
 201         } else {
 202                 return "UNKNOWN";
 203         }
 204 }
 205
 206 sub setup_nt4_dc($$)
 207 {
 208         my ($self, $path) = @_;
 209
 210         print "PROVISIONING NT4 DC...";
 211
 212         my $nt4_dc_options = "
 213         domain master = yes
 214         domain logons = yes
 215         lanman auth = yes
 216         ntlm auth = yes
 217         raw NTLMv2 auth = yes
 218
 219         rpc_server:epmapper = external
 220         rpc_server:spoolss = external
 221         rpc_server:lsarpc = external
 222         rpc_server:samr = external
 223         rpc_server:netlogon = external
 224         rpc_server:register_embedded_np = yes
 225         rpc_server:FssagentRpc = external
 226
 227         rpc_daemon:epmd = fork
 228         rpc_daemon:spoolssd = fork
 229         rpc_daemon:lsasd = fork
 230         rpc_daemon:fssd = fork
 231         fss: sequence timeout = 1
 232 ";
 233
 234         my $vars = $self->provision($path,
 235                                     "LOCALNT4DC2",
 236                                     "localntdc2pass",
 237                                     $nt4_dc_options);
 238
 239         $vars or return undef;
 240
 241         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 242                return undef;
 243         }
 244
 245         $vars->{DC_SERVER} = $vars->{SERVER};
 246         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 247         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 248         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 249         $vars->{DC_USERNAME} = $vars->{USERNAME};
 250         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 251
 252         $self->{vars}->{nt4_dc} = $vars;
 253
 254         return $vars;
 255 }
 256
 257 sub setup_nt4_dc_schannel($$)
 258 {
 259         my ($self, $path) = @_;
 260
 261         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 262
 263         my $pdc_options = "
 264         domain master = yes
 265         domain logons = yes
 266         lanman auth = yes
 267
 268         rpc_server:epmapper = external
 269         rpc_server:spoolss = external
 270         rpc_server:lsarpc = external
 271         rpc_server:samr = external
 272         rpc_server:netlogon = external
 273         rpc_server:register_embedded_np = yes
 274
 275         rpc_daemon:epmd = fork
 276         rpc_daemon:spoolssd = fork
 277         rpc_daemon:lsasd = fork
 278
 279         server schannel = yes
 280 ";
 281
 282         my $vars = $self->provision($path,
 283                                     "LOCALNT4DC9",
 284                                     "localntdc9pass",
 285                                     $pdc_options);
 286
 287         $vars or return undef;
 288
 289         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 290                return undef;
 291         }
 292
 293         $vars->{DC_SERVER} = $vars->{SERVER};
 294         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 295         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 296         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 297         $vars->{DC_USERNAME} = $vars->{USERNAME};
 298         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 299
 300         $self->{vars}->{nt4_dc_schannel} = $vars;
 301
 302         return $vars;
 303 }
 304
 305 sub setup_nt4_member($$$)
 306 {
 307         my ($self, $prefix, $nt4_dc_vars) = @_;
 308         my $count = 0;
 309         my $rc;
 310
 311         print "PROVISIONING MEMBER...";
 312
 313         my $require_mutexes = "dbwrap_tdb_require_mutexes:* = yes";
 314         $require_mutexes = "" if ($ENV{SELFTEST_DONT_REQUIRE_TDB_MUTEX_SUPPORT} eq "1");
 315
 316         my $member_options = "
 317         security = domain
 318         dbwrap_tdb_mutexes:* = yes
 319         ${require_mutexes}
 320 ";
 321         my $ret = $self->provision($prefix,
 322                                    "LOCALNT4MEMBER3",
 323                                    "localnt4member3pass",
 324                                    $member_options);
 325
 326         $ret or return undef;
 327
 328         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 329         do {
 330                 print "Waiting for the LOGON SERVER registration ...\n";
 331                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 332                 if ($rc != 0) {
 333                         sleep(1);
 334                 }
 335                 $count++;
 336         } while ($rc != 0 && $count < 10);
 337         if ($count == 10) {
 338                 print "NMBD not reachable after 10 retries\n";
 339                 teardown_env($self, $ret);
 340                 return 0;
 341         }
 342
 343         my $net = Samba::bindir_path($self, "net");
 344         my $cmd = "";
 345         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 346         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 347         $cmd .= "$net join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 348         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 349
 350         if (system($cmd) != 0) {
 351             warn("Join failed\n$cmd");
 352             return undef;
 353         }
 354
 355         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 356                return undef;
 357         }
 358
 359         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 360         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 361         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 362         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 363         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 364         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 365
 366         return $ret;
 367 }
 368
 369 sub setup_admember($$$$)
 370 {
 371         my ($self, $prefix, $dcvars) = @_;
 372
 373         my $prefix_abs = abs_path($prefix);
 374         my @dirs = ();
 375
 376         # If we didn't build with ADS, pretend this env was never available
 377         if (not $self->have_ads()) {
 378                 return "UNKNOWN";
 379         }
 380
 381         print "PROVISIONING S3 AD MEMBER...";
 382
 383         mkdir($prefix_abs, 0777);
 384
 385         my $share_dir="$prefix_abs/share";
 386         push(@dirs, $share_dir);
 387
 388         my $substitution_path = "$share_dir/D_SAMBADOMAIN";
 389         push(@dirs, $substitution_path);
 390
 391         $substitution_path = "$share_dir/D_SAMBADOMAIN/U_alice";
 392         push(@dirs, $substitution_path);
 393
 394         $substitution_path = "$share_dir/D_SAMBADOMAIN/U_alice/G_domain users";
 395         push(@dirs, $substitution_path);
 396
 397         my $member_options = "
 398         security = ads
 399         workgroup = $dcvars->{DOMAIN}
 400         realm = $dcvars->{REALM}
 401         netbios aliases = foo bar
 402
 403 [subDUG]
 404         path = $share_dir/D_%D/U_%U/G_%G
 405         writeable = yes
 406
 407 ";
 408
 409         my $ret = $self->provision($prefix,
 410                                    "LOCALADMEMBER",
 411                                    "loCalMemberPass",
 412                                    $member_options,
 413                                    $dcvars->{SERVER_IP},
 414                                    $dcvars->{SERVER_IPV6});
 415
 416         $ret or return undef;
 417
 418         mkdir($_, 0777) foreach(@dirs);
 419
 420         close(USERMAP);
 421         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 422         $ret->{REALM} = $dcvars->{REALM};
 423
 424         my $ctx;
 425         $ctx = {};
 426         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 427         $ctx->{domain} = $dcvars->{DOMAIN};
 428         $ctx->{realm} = $dcvars->{REALM};
 429         $ctx->{dnsname} = lc($dcvars->{REALM});
 430         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 431         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 432         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 433         Samba::mk_krb5_conf($ctx, "");
 434
 435         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 436
 437         my $net = Samba::bindir_path($self, "net");
 438         my $cmd = "";
 439         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 440         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 441                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 442         } else {
 443                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 444         }
 445         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 446         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 447         $cmd .= "$net join $ret->{CONFIGURATION}";
 448         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 449
 450         if (system($cmd) != 0) {
 451             warn("Join failed\n$cmd");
 452             return undef;
 453         }
 454
 455         # We need world access to this share, as otherwise the domain
 456         # administrator from the AD domain provided by Samba4 can't
 457         # access the share for tests.
 458         chmod 0777, "$prefix/share";
 459
 460         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 461                 return undef;
 462         }
 463
 464         $ret->{DC_SERVER} = $dcvars->{SERVER};
 465         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 466         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 467         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 468         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 469         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 470
 471         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 472         $ret->{target} = $self;
 473
 474         return $ret;
 475 }
 476
 477 sub setup_admember_rfc2307($$$$)
 478 {
 479         my ($self, $prefix, $dcvars) = @_;
 480
 481         # If we didn't build with ADS, pretend this env was never available
 482         if (not $self->have_ads()) {
 483                 return "UNKNOWN";
 484         }
 485
 486         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 487
 488         my $member_options = "
 489         security = ads
 490         workgroup = $dcvars->{DOMAIN}
 491         realm = $dcvars->{REALM}
 492         idmap config * : backend = autorid
 493         idmap config * : range = 1000000-1999999
 494         idmap config * : rangesize = 100000
 495         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 496         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 497         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 498         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 499         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 500 ";
 501
 502         my $ret = $self->provision($prefix,
 503                                    "RFC2307MEMBER",
 504                                    "loCalMemberPass",
 505                                    $member_options,
 506                                    $dcvars->{SERVER_IP},
 507                                    $dcvars->{SERVER_IPV6});
 508
 509         $ret or return undef;
 510
 511         close(USERMAP);
 512         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 513         $ret->{REALM} = $dcvars->{REALM};
 514
 515         my $ctx;
 516         my $prefix_abs = abs_path($prefix);
 517         $ctx = {};
 518         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 519         $ctx->{domain} = $dcvars->{DOMAIN};
 520         $ctx->{realm} = $dcvars->{REALM};
 521         $ctx->{dnsname} = lc($dcvars->{REALM});
 522         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 523         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 524         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 525         Samba::mk_krb5_conf($ctx, "");
 526
 527         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 528
 529         my $net = Samba::bindir_path($self, "net");
 530         my $cmd = "";
 531         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 532         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 533                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 534         } else {
 535                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 536         }
 537         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 538         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 539         $cmd .= "$net join $ret->{CONFIGURATION}";
 540         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 541
 542         if (system($cmd) != 0) {
 543             warn("Join failed\n$cmd");
 544             return undef;
 545         }
 546
 547         # We need world access to this share, as otherwise the domain
 548         # administrator from the AD domain provided by Samba4 can't
 549         # access the share for tests.
 550         chmod 0777, "$prefix/share";
 551
 552         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 553                 return undef;
 554         }
 555
 556         $ret->{DC_SERVER} = $dcvars->{SERVER};
 557         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 558         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 559         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 560         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 561         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 562
 563         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 564         $ret->{target} = $self;
 565
 566         return $ret;
 567 }
 568
 569 sub setup_simpleserver($$)
 570 {
 571         my ($self, $path) = @_;
 572
 573         print "PROVISIONING simple server...";
 574
 575         my $prefix_abs = abs_path($path);
 576
 577         my $simpleserver_options = "
 578         lanman auth = yes
 579         ntlm auth = yes
 580         vfs objects = xattr_tdb streams_depot time_audit full_audit
 581         change notify = no
 582         smb encrypt = off
 583
 584         full_audit:syslog = no
 585         full_audit:success = none
 586         full_audit:failure = none
 587
 588 [vfs_aio_fork]
 589         path = $prefix_abs/share
 590         vfs objects = aio_fork
 591         read only = no
 592         vfs_aio_fork:erratic_testing_mode=yes
 593
 594 [dosmode]
 595         path = $prefix_abs/share
 596         vfs objects =
 597         store dos attributes = yes
 598         hide files = /hidefile/
 599         hide dot files = yes
 600
 601 [enc_desired]
 602         path = $prefix_abs/share
 603         vfs objects =
 604         smb encrypt = desired
 605 ";
 606
 607         my $vars = $self->provision($path,
 608                                     "LOCALSHARE4",
 609                                     "local4pass",
 610                                     $simpleserver_options);
 611
 612         $vars or return undef;
 613
 614         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 615                return undef;
 616         }
 617
 618         $self->{vars}->{simpleserver} = $vars;
 619
 620         return $vars;
 621 }
 622
 623 sub setup_fileserver($$)
 624 {
 625         my ($self, $path) = @_;
 626         my $prefix_abs = abs_path($path);
 627         my $srcdir_abs = abs_path($self->{srcdir});
 628
 629         print "PROVISIONING file server ...\n";
 630
 631         my @dirs = ();
 632
 633         mkdir($prefix_abs, 0777);
 634
 635         my $share_dir="$prefix_abs/share";
 636
 637         # Create share directory structure
 638         my $lower_case_share_dir="$share_dir/lower-case";
 639         push(@dirs, $lower_case_share_dir);
 640
 641         my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
 642         push(@dirs, $lower_case_share_dir_30000);
 643
 644         my $dfree_share_dir="$share_dir/dfree";
 645         push(@dirs, $dfree_share_dir);
 646         push(@dirs, "$dfree_share_dir/subdir1");
 647         push(@dirs, "$dfree_share_dir/subdir2");
 648         push(@dirs, "$dfree_share_dir/subdir3");
 649
 650         my $valid_users_sharedir="$share_dir/valid_users";
 651         push(@dirs,$valid_users_sharedir);
 652
 653         my $offline_sharedir="$share_dir/offline";
 654         push(@dirs,$offline_sharedir);
 655
 656         my $force_user_valid_users_dir = "$share_dir/force_user_valid_users";
 657         push(@dirs, $force_user_valid_users_dir);
 658
 659         my $smbget_sharedir="$share_dir/smbget";
 660         push(@dirs,$smbget_sharedir);
 661
 662         my $fileserver_options = "
 663 [lowercase]
 664         path = $lower_case_share_dir
 665         comment = smb username is [%U]
 666         case sensitive = True
 667         default case = lower
 668         preserve case = no
 669         short preserve case = no
 670 [lowercase-30000]
 671         path = $lower_case_share_dir_30000
 672         comment = smb username is [%U]
 673         case sensitive = True
 674         default case = lower
 675         preserve case = no
 676         short preserve case = no
 677 [dfree]
 678         path = $dfree_share_dir
 679         comment = smb username is [%U]
 680         dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
 681 [valid-users-access]
 682         path = $valid_users_sharedir
 683         valid users = +userdup
 684 [offline]
 685         path = $offline_sharedir
 686         vfs objects = offline
 687
 688 # BUG: https://bugzilla.samba.org/show_bug.cgi?id=9878
 689 # RH BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1077651
 690 [force_user_valid_users]
 691         path = $force_user_valid_users_dir
 692         comment = force user with valid users combination test share
 693         valid users = +force_user
 694         force user = force_user
 695         force group = everyone
 696         write list = force_user
 697
 698 [smbget]
 699         path = $smbget_sharedir
 700         comment = smb username is [%U]
 701         guest ok = yes
 702 [ign_sysacls]
 703         path = $share_dir
 704         comment = ignore system acls
 705         acl_xattr:ignore system acls = yes
 706 [inherit_owner]
 707         path = $share_dir
 708         comment = inherit owner
 709         inherit owner = yes
 710 [inherit_owner_u]
 711         path = $share_dir
 712         comment = inherit only unix owner
 713         inherit owner = unix only
 714         acl_xattr:ignore system acls = yes
 715 ";
 716
 717         my $vars = $self->provision($path,
 718                                     "FILESERVER",
 719                                     "fileserver",
 720                                     $fileserver_options,
 721                                     undef,
 722                                     undef,
 723                                     1);
 724
 725         $vars or return undef;
 726
 727         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 728                return undef;
 729         }
 730
 731         $self->{vars}->{fileserver} = $vars;
 732
 733         mkdir($_, 0777) foreach(@dirs);
 734
 735         ## Create case sensitive lower case share dir
 736         foreach my $file ('a'..'z') {
 737                 my $full_path = $lower_case_share_dir . '/' . $file;
 738                 open my $fh, '>', $full_path;
 739                 # Add some content to file
 740                 print $fh $full_path;
 741                 close $fh;
 742         }
 743
 744         for (my $file = 1; $file < 51; ++$file) {
 745                 my $full_path = $lower_case_share_dir . '/' . $file;
 746                 open my $fh, '>', $full_path;
 747                 # Add some content to file
 748                 print $fh $full_path;
 749                 close $fh;
 750         }
 751
 752         # Create content for 30000 share
 753         foreach my $file ('a'..'z') {
 754                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 755                 open my $fh, '>', $full_path;
 756                 # Add some content to file
 757                 print $fh $full_path;
 758                 close $fh;
 759         }
 760
 761         for (my $file = 1; $file < 30001; ++$file) {
 762                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 763                 open my $fh, '>', $full_path;
 764                 # Add some content to file
 765                 print $fh $full_path;
 766                 close $fh;
 767         }
 768
 769         ##
 770         ## create a listable file in valid_users_share
 771         ##
 772         my $valid_users_target = "$valid_users_sharedir/foo";
 773         unless (open(VALID_USERS_TARGET, ">$valid_users_target")) {
 774                 warn("Unable to open $valid_users_target");
 775                 return undef;
 776         }
 777         close(VALID_USERS_TARGET);
 778         chmod 0644, $valid_users_target;
 779
 780         return $vars;
 781 }
 782
 783 sub setup_ktest($$$)
 784 {
 785         my ($self, $prefix) = @_;
 786
 787         # If we didn't build with ADS, pretend this env was never available
 788         if (not $self->have_ads()) {
 789                 return "UNKNOWN";
 790         }
 791
 792         print "PROVISIONING server with security=ads...";
 793
 794         my $ktest_options = "
 795         workgroup = KTEST
 796         realm = ktest.samba.example.com
 797         security = ads
 798         username map = $prefix/lib/username.map
 799         server signing = required
 800         server min protocol = SMB3_00
 801         client max protocol = SMB3
 802 ";
 803
 804         my $ret = $self->provision($prefix,
 805                                    "LOCALKTEST6",
 806                                    "localktest6pass",
 807                                    $ktest_options);
 808
 809         $ret or return undef;
 810
 811         my $ctx;
 812         my $prefix_abs = abs_path($prefix);
 813         $ctx = {};
 814         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 815         $ctx->{domain} = "KTEST";
 816         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 817         $ctx->{dnsname} = lc($ctx->{realm});
 818         $ctx->{kdc_ipv4} = "0.0.0.0";
 819         $ctx->{kdc_ipv6} = "::";
 820         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 821         Samba::mk_krb5_conf($ctx, "");
 822
 823         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 824
 825         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 826         print USERMAP "
 827 $ret->{USERNAME} = KTEST\\Administrator
 828 ";
 829         close(USERMAP);
 830
 831 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 832 #Samba4 DC with the same parameters as are being used here.  The
 833 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 834
 835         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 836         chmod 0600, "$prefix/private/secrets.tdb";
 837
 838 #Make sure there's no old ntdb file.
 839         system("rm -f $prefix/private/secrets.ntdb");
 840
 841 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 842 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 843 #
 844 #and having in krb5.conf:
 845 # ticket_lifetime = 799718400
 846 # renew_lifetime = 799718400
 847 #
 848 # The commands for the -2 keytab where were:
 849 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 850 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 851 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 852 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 853 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 854 #
 855 # and then for the -3 keytab, I did
 856 #
 857 # net changetrustpw; kdestroy and the same again.
 858 #
 859 # This creates a credential cache with a very long lifetime (2036 at
 860 # at 2011-04), and shows that running 'net changetrustpw' does not
 861 # break existing logins (for the secrets.tdb method at least).
 862 #
 863
 864         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 865
 866         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 867         chmod 0600, "$prefix/krb5_ccache-2";
 868
 869         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 870         chmod 0600, "$prefix/krb5_ccache-3";
 871
 872         # We need world access to this share, as otherwise the domain
 873         # administrator from the AD domain provided by ktest can't
 874         # access the share for tests.
 875         chmod 0777, "$prefix/share";
 876
 877         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
 878                return undef;
 879         }
 880         return $ret;
 881 }
 882
 883 sub setup_maptoguest($$)
 884 {
 885         my ($self, $path) = @_;
 886
 887         print "PROVISIONING maptoguest...";
 888
 889         my $options = "
 890 map to guest = bad user
 891 ntlm auth = yes
 892 ";
 893
 894         my $vars = $self->provision($path,
 895                                     "maptoguest",
 896                                     "maptoguestpass",
 897                                     $options);
 898
 899         $vars or return undef;
 900
 901         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 902                return undef;
 903         }
 904
 905         $self->{vars}->{s3maptoguest} = $vars;
 906
 907         return $vars;
 908 }
 909
 910 sub stop_sig_term($$) {
 911         my ($self, $pid) = @_;
 912         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 913 }
 914
 915 sub stop_sig_kill($$) {
 916         my ($self, $pid) = @_;
 917         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 918 }
 919
 920 sub write_pid($$$)
 921 {
 922         my ($env_vars, $app, $pid) = @_;
 923
 924         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 925         print PID $pid;
 926         close(PID);
 927 }
 928
 929 sub read_pid($$)
 930 {
 931         my ($env_vars, $app) = @_;
 932
 933         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 934         my $pid = <PID>;
 935         close(PID);
 936         return $pid;
 937 }
 938
 939 sub check_or_start($$$$$) {
 940         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 941
 942         # use a pipe for stdin in the child processes. This allows
 943         # those processes to monitor the pipe for EOF to ensure they
 944         # exit when the test script exits
 945         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
 946
 947         unlink($env_vars->{NMBD_TEST_LOG});
 948         print "STARTING NMBD...";
 949         my $pid = fork();
 950         if ($pid == 0) {
 951                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 952                 open STDERR, '>&STDOUT';
 953
 954                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 955
 956                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 957                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.nmbd";
 958                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 959                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 960
 961                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 962                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 963                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 964                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 965                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 966                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 967                 $ENV{UID_WRAPPER_ROOT} = "1";
 968
 969                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
 970
 971                 if ($nmbd ne "yes") {
 972                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 973                                 my $signame = shift;
 974                                 print("Skip nmbd received signal $signame");
 975                                 exit 0;
 976                         };
 977                         sleep($self->{server_maxtime});
 978                         exit 0;
 979                 }
 980
 981                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 982                 my @optargs = ("-d0");
 983                 if (defined($ENV{NMBD_OPTIONS})) {
 984                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 985                 }
 986                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 987                 if(defined($ENV{NMBD_VALGRIND})) {
 988                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 989                 }
 990                 my @args = ("-F", "--no-process-group",
 991                             "-s", $env_vars->{SERVERCONFFILE},
 992                             "-l", $env_vars->{LOGDIR});
 993                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
 994                         push(@args, "--log-stdout");
 995                 }
 996
 997                 close($env_vars->{STDIN_PIPE});
 998                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 999
1000                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1001                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1002         }
1003         $env_vars->{NMBD_TL_PID} = $pid;
1004         write_pid($env_vars, "nmbd", $pid);
1005         print "DONE\n";
1006
1007         unlink($env_vars->{WINBINDD_TEST_LOG});
1008         print "STARTING WINBINDD...";
1009         $pid = fork();
1010         if ($pid == 0) {
1011                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
1012                 open STDERR, '>&STDOUT';
1013
1014                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1015
1016                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1017                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.winbindd";
1018                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1019                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1020
1021                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1022                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1023                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1024                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1025                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1026                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1027                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1028                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1029                 } else {
1030                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1031                 }
1032                 $ENV{UID_WRAPPER_ROOT} = "1";
1033
1034                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
1035
1036                 if ($winbindd ne "yes") {
1037                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1038                                 my $signame = shift;
1039                                 print("Skip winbindd received signal $signame");
1040                                 exit 0;
1041                         };
1042                         sleep($self->{server_maxtime});
1043                         exit 0;
1044                 }
1045
1046                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
1047                 my @optargs = ("-d0");
1048                 if (defined($ENV{WINBINDD_OPTIONS})) {
1049                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
1050                 }
1051                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1052                 if(defined($ENV{WINBINDD_VALGRIND})) {
1053                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
1054                 }
1055                 my @args = ("-F", "--no-process-group",
1056                             "-s", $env_vars->{SERVERCONFFILE},
1057                             "-l", $env_vars->{LOGDIR});
1058                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
1059                         push(@args, "--stdout");
1060                 }
1061
1062                 close($env_vars->{STDIN_PIPE});
1063                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1064
1065                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1066                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1067         }
1068         $env_vars->{WINBINDD_TL_PID} = $pid;
1069         write_pid($env_vars, "winbindd", $pid);
1070         print "DONE\n";
1071
1072         unlink($env_vars->{SMBD_TEST_LOG});
1073         print "STARTING SMBD...";
1074         $pid = fork();
1075         if ($pid == 0) {
1076                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
1077                 open STDERR, '>&STDOUT';
1078
1079                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1080
1081                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1082                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.smbd";
1083                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1084                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1085
1086                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1087                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1088                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1089                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1090                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1091                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1092                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1093                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1094                 } else {
1095                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1096                 }
1097                 $ENV{UID_WRAPPER_ROOT} = "1";
1098
1099                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
1100
1101                 if ($smbd ne "yes") {
1102                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1103                                 my $signame = shift;
1104                                 print("Skip smbd received signal $signame");
1105                                 exit 0;
1106                         };
1107                         sleep($self->{server_maxtime});
1108                         exit 0;
1109                 }
1110
1111                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
1112                 my @optargs = ("-d0");
1113                 if (defined($ENV{SMBD_OPTIONS})) {
1114                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
1115                 }
1116                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1117                 if(defined($ENV{SMBD_VALGRIND})) {
1118                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
1119                 }
1120                 my @args = ("-F", "--no-process-group",
1121                             "-s", $env_vars->{SERVERCONFFILE},
1122                             "-l", $env_vars->{LOGDIR});
1123                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
1124                         push(@args, "--log-stdout");
1125                 }
1126
1127                 close($env_vars->{STDIN_PIPE});
1128                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1129
1130                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1131                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1132         }
1133         $env_vars->{SMBD_TL_PID} = $pid;
1134         write_pid($env_vars, "smbd", $pid);
1135         print "DONE\n";
1136
1137         close(STDIN_READER);
1138
1139         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1140 }
1141
1142 sub createuser($$$$)
1143 {
1144         my ($self, $username, $password, $conffile) = @_;
1145         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $username > /dev/null";
1146         unless (open(PWD, "|$cmd")) {
1147             warn("Unable to set password for $username account\n$cmd");
1148             return undef;
1149         }
1150         print PWD "$password\n$password\n";
1151         unless (close(PWD)) {
1152             warn("Unable to set password for $username account\n$cmd");
1153             return undef;
1154         }
1155 }
1156
1157 sub provision($$$$$$$$)
1158 {
1159         my ($self, $prefix, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1160
1161         ##
1162         ## setup the various environment variables we need
1163         ##
1164
1165         my $swiface = Samba::get_interface($server);
1166         my %ret = ();
1167         my $server_ip = "127.0.0.$swiface";
1168         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
1169         my $domain = "SAMBA-TEST";
1170
1171         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1172         chomp $unix_name;
1173         my $unix_uid = $>;
1174         my $unix_gids_str = $);
1175         my @unix_gids = split(" ", $unix_gids_str);
1176
1177         my $prefix_abs = abs_path($prefix);
1178         my $bindir_abs = abs_path($self->{bindir});
1179
1180         my @dirs = ();
1181
1182         my $shrdir="$prefix_abs/share";
1183         push(@dirs,$shrdir);
1184
1185         my $libdir="$prefix_abs/lib";
1186         push(@dirs,$libdir);
1187
1188         my $piddir="$prefix_abs/pid";
1189         push(@dirs,$piddir);
1190
1191         my $privatedir="$prefix_abs/private";
1192         push(@dirs,$privatedir);
1193
1194         my $lockdir="$prefix_abs/lockdir";
1195         push(@dirs,$lockdir);
1196
1197         my $eventlogdir="$prefix_abs/lockdir/eventlog";
1198         push(@dirs,$eventlogdir);
1199
1200         my $logdir="$prefix_abs/logs";
1201         push(@dirs,$logdir);
1202
1203         my $driver32dir="$shrdir/W32X86";
1204         push(@dirs,$driver32dir);
1205
1206         my $driver64dir="$shrdir/x64";
1207         push(@dirs,$driver64dir);
1208
1209         my $driver40dir="$shrdir/WIN40";
1210         push(@dirs,$driver40dir);
1211
1212         my $ro_shrdir="$shrdir/root-tmp";
1213         push(@dirs,$ro_shrdir);
1214
1215         my $msdfs_shrdir="$shrdir/msdfsshare";
1216         push(@dirs,$msdfs_shrdir);
1217
1218         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1219         push(@dirs,$msdfs_deeppath);
1220
1221         my $badnames_shrdir="$shrdir/badnames";
1222         push(@dirs,$badnames_shrdir);
1223
1224         my $lease1_shrdir="$shrdir/SMB2_10";
1225         push(@dirs,$lease1_shrdir);
1226
1227         my $lease2_shrdir="$shrdir/SMB3_00";
1228         push(@dirs,$lease2_shrdir);
1229
1230         my $manglenames_shrdir="$shrdir/manglenames";
1231         push(@dirs,$manglenames_shrdir);
1232
1233         my $widelinks_shrdir="$shrdir/widelinks";
1234         push(@dirs,$widelinks_shrdir);
1235
1236         my $widelinks_linkdir="$shrdir/widelinks_foo";
1237         push(@dirs,$widelinks_linkdir);
1238
1239         my $shadow_tstdir="$shrdir/shadow";
1240         push(@dirs,$shadow_tstdir);
1241         my $shadow_mntdir="$shadow_tstdir/mount";
1242         push(@dirs,$shadow_mntdir);
1243         my $shadow_basedir="$shadow_mntdir/base";
1244         push(@dirs,$shadow_basedir);
1245         my $shadow_shrdir="$shadow_basedir/share";
1246         push(@dirs,$shadow_shrdir);
1247
1248         # this gets autocreated by winbindd
1249         my $wbsockdir="$prefix_abs/winbindd";
1250
1251         my $nmbdsockdir="$prefix_abs/nmbd";
1252         unlink($nmbdsockdir);
1253
1254         ##
1255         ## create the test directory layout
1256         ##
1257         die ("prefix_abs = ''") if $prefix_abs eq "";
1258         die ("prefix_abs = '/'") if $prefix_abs eq "/";
1259
1260         mkdir($prefix_abs, 0777);
1261         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1262         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1263             system("rm -rf $prefix_abs/*");
1264         }
1265         mkdir($_, 0777) foreach(@dirs);
1266
1267         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1268
1269         ##
1270         ## lockdir and piddir must be 0755
1271         ##
1272         chmod 0755, $lockdir;
1273         chmod 0755, $piddir;
1274
1275
1276         ##
1277         ## create ro and msdfs share layout
1278         ##
1279
1280         chmod 0755, $ro_shrdir;
1281         my $unreadable_file = "$ro_shrdir/unreadable_file";
1282         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1283                 warn("Unable to open $unreadable_file");
1284                 return undef;
1285         }
1286         close(UNREADABLE_FILE);
1287         chmod 0600, $unreadable_file;
1288
1289         my $msdfs_target = "$ro_shrdir/msdfs-target";
1290         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1291                 warn("Unable to open $msdfs_target");
1292                 return undef;
1293         }
1294         close(MSDFS_TARGET);
1295         chmod 0666, $msdfs_target;
1296         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1297                 "$msdfs_shrdir/msdfs-src1";
1298         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1299
1300         ##
1301         ## create bad names in $badnames_shrdir
1302         ##
1303         ## (An invalid name, would be mangled to 8.3).
1304         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1305         unless (open(BADNAME_TARGET, ">$badname_target")) {
1306                 warn("Unable to open $badname_target");
1307                 return undef;
1308         }
1309         close(BADNAME_TARGET);
1310         chmod 0666, $badname_target;
1311
1312         ## (A bad name, would not be mangled to 8.3).
1313         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1314         unless (open(BADNAME_TARGET, ">$badname_target")) {
1315                 warn("Unable to open $badname_target");
1316                 return undef;
1317         }
1318         close(BADNAME_TARGET);
1319         chmod 0666, $badname_target;
1320
1321         ## (A bad good name).
1322         my $badname_target = "$badnames_shrdir/blank.txt";
1323         unless (open(BADNAME_TARGET, ">$badname_target")) {
1324                 warn("Unable to open $badname_target");
1325                 return undef;
1326         }
1327         close(BADNAME_TARGET);
1328         chmod 0666, $badname_target;
1329
1330         ##
1331         ## create mangleable directory names in $manglenames_shrdir
1332         ##
1333         my $manglename_target = "$manglenames_shrdir/foo:bar";
1334         mkdir($manglename_target, 0777);
1335
1336         ##
1337         ## create symlinks for widelinks tests.
1338         ##
1339         my $widelinks_target = "$widelinks_linkdir/target";
1340         unless (open(WIDELINKS_TARGET, ">$widelinks_target")) {
1341                 warn("Unable to open $widelinks_target");
1342                 return undef;
1343         }
1344         close(WIDELINKS_TARGET);
1345         chmod 0666, $widelinks_target;
1346         ##
1347         ## This link should get ACCESS_DENIED
1348         ##
1349         symlink "$widelinks_target", "$widelinks_shrdir/source";
1350         ##
1351         ## This link should be allowed
1352         ##
1353         symlink "$widelinks_shrdir", "$widelinks_shrdir/dot";
1354
1355         my $conffile="$libdir/server.conf";
1356         my $dfqconffile="$libdir/dfq.conf";
1357
1358         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
1359         my $nss_wrapper_passwd = "$privatedir/passwd";
1360         my $nss_wrapper_group = "$privatedir/group";
1361         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1362         my $resolv_conf = "$privatedir/resolv.conf";
1363         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1364
1365         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1366
1367         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1368
1369         my @eventlog_list = ("dns server", "application");
1370
1371         ##
1372         ## calculate uids and gids
1373         ##
1374
1375         my ($max_uid, $max_gid);
1376         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2, $uid_userdup);
1377         my ($uid_pdbtest_wkn);
1378         my ($uid_smbget);
1379         my ($uid_force_user);
1380         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1381         my ($gid_userdup, $gid_everyone);
1382         my ($gid_force_user);
1383         my ($uid_user1);
1384         my ($uid_user2);
1385
1386         if ($unix_uid < 0xffff - 10) {
1387                 $max_uid = 0xffff;
1388         } else {
1389                 $max_uid = $unix_uid;
1390         }
1391
1392         $uid_root = $max_uid - 1;
1393         $uid_nobody = $max_uid - 2;
1394         $uid_pdbtest = $max_uid - 3;
1395         $uid_pdbtest2 = $max_uid - 4;
1396         $uid_userdup = $max_uid - 5;
1397         $uid_pdbtest_wkn = $max_uid - 6;
1398         $uid_force_user = $max_uid - 7;
1399         $uid_smbget = $max_uid - 8;
1400         $uid_user1 = $max_uid - 9;
1401         $uid_user2 = $max_uid - 10;
1402
1403         if ($unix_gids[0] < 0xffff - 8) {
1404                 $max_gid = 0xffff;
1405         } else {
1406                 $max_gid = $unix_gids[0];
1407         }
1408
1409         $gid_nobody = $max_gid - 1;
1410         $gid_nogroup = $max_gid - 2;
1411         $gid_root = $max_gid - 3;
1412         $gid_domusers = $max_gid - 4;
1413         $gid_domadmins = $max_gid - 5;
1414         $gid_userdup = $max_gid - 6;
1415         $gid_everyone = $max_gid - 7;
1416         $gid_force_user = $max_gid - 8;
1417
1418         ##
1419         ## create conffile
1420         ##
1421
1422         unless (open(CONF, ">$conffile")) {
1423                 warn("Unable to open $conffile");
1424                 return undef;
1425         }
1426         print CONF "
1427 [global]
1428         netbios name = $server
1429         interfaces = $server_ip/8 $server_ipv6/64
1430         bind interfaces only = yes
1431         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1432         smbd:suicide mode = yes
1433
1434         workgroup = $domain
1435
1436         private dir = $privatedir
1437         pid directory = $piddir
1438         lock directory = $lockdir
1439         log file = $logdir/log.\%m
1440         log level = 1
1441         debug pid = yes
1442         max log size = 0
1443
1444         state directory = $lockdir
1445         cache directory = $lockdir
1446
1447         passdb backend = tdbsam
1448
1449         time server = yes
1450
1451         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1452         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1453         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1454         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1455         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1456         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1457         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1458
1459         addprinter command =            $mod_printer_pl -a -s $conffile --
1460         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1461
1462         eventlog list = application \"dns server\"
1463
1464         kernel oplocks = no
1465         kernel change notify = no
1466
1467         logging = file
1468         printing = bsd
1469         printcap name = /dev/null
1470
1471         winbindd socket directory = $wbsockdir
1472         nmbd:socket dir = $nmbdsockdir
1473         idmap config * : range = 100000-200000
1474         winbind enum users = yes
1475         winbind enum groups = yes
1476         winbind separator = /
1477         include system krb5 conf = no
1478
1479 #       min receivefile size = 4000
1480
1481         read only = no
1482
1483         smbd:sharedelay = 100000
1484         smbd:writetimeupdatedelay = 500000
1485         map hidden = no
1486         map system = no
1487         map readonly = no
1488         store dos attributes = yes
1489         create mask = 755
1490         dos filemode = yes
1491         strict rename = yes
1492         strict sync = yes
1493         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1494
1495         printing = vlp
1496         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1497         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1498         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1499         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1500         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1501         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1502         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1503         lpq cache time = 0
1504         print notify backchannel = yes
1505
1506         ncalrpc dir = $prefix_abs/ncalrpc
1507
1508         # The samba3.blackbox.smbclient_s3 test uses this to test that
1509         # sending messages works, and that the %m sub works.
1510         message command = mv %s $shrdir/message.%m
1511
1512         # fsrvp server requires registry shares
1513         registry shares = yes
1514
1515         # Used by RPC SRVSVC tests
1516         add share command = $bindir_abs/smbaddshare
1517         change share command = $bindir_abs/smbchangeshare
1518         delete share command = $bindir_abs/smbdeleteshare
1519
1520         # fruit:copyfile is a global option
1521         fruit:copyfile = yes
1522
1523         #this does not mean that we use non-secure test env,
1524         #it just means we ALLOW one to be configured.
1525         allow insecure wide links = yes
1526
1527         # Begin extra options
1528         $extra_options
1529         # End extra options
1530
1531         #Include user defined custom parameters if set
1532 ";
1533
1534         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1535                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1536         }
1537
1538         print CONF "
1539 [tmp]
1540         path = $shrdir
1541         comment = smb username is [%U]
1542 [tmpsort]
1543         path = $shrdir
1544         comment = Load dirsort module
1545         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1546 [tmpenc]
1547         path = $shrdir
1548         comment = encrypt smb username is [%U]
1549         smb encrypt = required
1550         vfs objects = dirsort
1551 [tmpguest]
1552         path = $shrdir
1553         guest ok = yes
1554 [guestonly]
1555         path = $shrdir
1556         guest only = yes
1557         guest ok = yes
1558 [forceuser]
1559         path = $shrdir
1560         force user = $unix_name
1561         guest ok = yes
1562 [forceuser_unixonly]
1563         comment = force a user with unix user SID and group SID
1564         path = $shrdir
1565         force user = pdbtest
1566         guest ok = yes
1567 [forceuser_wkngroup]
1568         comment = force a user with well-known group SID
1569         path = $shrdir
1570         force user = pdbtest_wkn
1571         guest ok = yes
1572 [forcegroup]
1573         path = $shrdir
1574         force group = nogroup
1575         guest ok = yes
1576 [ro-tmp]
1577         path = $ro_shrdir
1578         guest ok = yes
1579 [write-list-tmp]
1580         path = $shrdir
1581         read only = yes
1582         write list = $unix_name
1583 [valid-users-tmp]
1584         path = $shrdir
1585         valid users = $unix_name
1586         access based share enum = yes
1587 [msdfs-share]
1588         path = $msdfs_shrdir
1589         msdfs root = yes
1590         msdfs shuffle referrals = yes
1591         guest ok = yes
1592 [hideunread]
1593         copy = tmp
1594         hide unreadable = yes
1595 [tmpcase]
1596         copy = tmp
1597         case sensitive = yes
1598 [hideunwrite]
1599         copy = tmp
1600         hide unwriteable files = yes
1601 [durable]
1602         copy = tmp
1603         kernel share modes = no
1604         kernel oplocks = no
1605         posix locking = no
1606 [fs_specific]
1607         copy = tmp
1608         $fs_specific_conf
1609 [print1]
1610         copy = tmp
1611         printable = yes
1612
1613 [print2]
1614         copy = print1
1615 [print3]
1616         copy = print1
1617         default devmode = no
1618 [lp]
1619         copy = print1
1620
1621 [nfs4acl_simple]
1622         path = $shrdir
1623         comment = smb username is [%U]
1624         nfs4:mode = simple
1625         vfs objects = nfs4acl_xattr xattr_tdb
1626
1627 [nfs4acl_special]
1628         path = $shrdir
1629         comment = smb username is [%U]
1630         nfs4:mode = special
1631         vfs objects = nfs4acl_xattr xattr_tdb
1632
1633 [xcopy_share]
1634         path = $shrdir
1635         comment = smb username is [%U]
1636         create mask = 777
1637         force create mode = 777
1638 [posix_share]
1639         path = $shrdir
1640         comment = smb username is [%U]
1641         create mask = 0777
1642         force create mode = 0
1643         directory mask = 0777
1644         force directory mode = 0
1645         vfs objects = xattr_tdb streams_depot
1646 [aio]
1647         copy = tmp
1648         aio read size = 1
1649         aio write size = 1
1650
1651 [print\$]
1652         copy = tmp
1653
1654 [vfs_fruit]
1655         path = $shrdir
1656         vfs objects = catia fruit streams_xattr acl_xattr
1657         ea support = yes
1658         fruit:resource = file
1659         fruit:metadata = netatalk
1660         fruit:locking = netatalk
1661         fruit:encoding = native
1662
1663 [vfs_fruit_metadata_stream]
1664         path = $shrdir
1665         vfs objects = fruit streams_xattr acl_xattr
1666         ea support = yes
1667         fruit:resource = file
1668         fruit:metadata = stream
1669
1670 [badname-tmp]
1671         path = $badnames_shrdir
1672         guest ok = yes
1673
1674 [manglenames_share]
1675         path = $manglenames_shrdir
1676         guest ok = yes
1677
1678 [dynamic_share]
1679         path = $shrdir/%R
1680         guest ok = yes
1681
1682 [widelinks_share]
1683         path = $widelinks_shrdir
1684         wide links = no
1685         guest ok = yes
1686
1687 [fsrvp_share]
1688         path = $shrdir
1689         comment = fake shapshots using rsync
1690         vfs objects = shell_snap shadow_copy2
1691         shell_snap:check path command = $fake_snap_pl --check
1692         shell_snap:create command = $fake_snap_pl --create
1693         shell_snap:delete command = $fake_snap_pl --delete
1694         # a relative path here fails, the snapshot dir is no longer found
1695         shadow:snapdir = $shrdir/.snapshots
1696
1697 [shadow1]
1698         path = $shadow_shrdir
1699         comment = previous versions snapshots under mount point
1700         vfs objects = shadow_copy2
1701         shadow:mountpoint = $shadow_mntdir
1702
1703 [shadow2]
1704         path = $shadow_shrdir
1705         comment = previous versions snapshots outside mount point
1706         vfs objects = shadow_copy2
1707         shadow:mountpoint = $shadow_mntdir
1708         shadow:snapdir = $shadow_tstdir/.snapshots
1709
1710 [shadow3]
1711         path = $shadow_shrdir
1712         comment = previous versions with subvolume snapshots, snapshots under base dir
1713         vfs objects = shadow_copy2
1714         shadow:mountpoint = $shadow_mntdir
1715         shadow:basedir = $shadow_basedir
1716         shadow:snapdir = $shadow_basedir/.snapshots
1717
1718 [shadow4]
1719         path = $shadow_shrdir
1720         comment = previous versions with subvolume snapshots, snapshots outside mount point
1721         vfs objects = shadow_copy2
1722         shadow:mountpoint = $shadow_mntdir
1723         shadow:basedir = $shadow_basedir
1724         shadow:snapdir = $shadow_tstdir/.snapshots
1725
1726 [shadow5]
1727         path = $shadow_shrdir
1728         comment = previous versions at volume root snapshots under mount point
1729         vfs objects = shadow_copy2
1730         shadow:mountpoint = $shadow_shrdir
1731
1732 [shadow6]
1733         path = $shadow_shrdir
1734         comment = previous versions at volume root snapshots outside mount point
1735         vfs objects = shadow_copy2
1736         shadow:mountpoint = $shadow_shrdir
1737         shadow:snapdir = $shadow_tstdir/.snapshots
1738
1739 [shadow7]
1740         path = $shadow_shrdir
1741         comment = previous versions snapshots everywhere
1742         vfs objects = shadow_copy2
1743         shadow:mountpoint = $shadow_mntdir
1744         shadow:snapdirseverywhere = yes
1745
1746 [shadow8]
1747         path = $shadow_shrdir
1748         comment = previous versions using snapsharepath
1749         vfs objects = shadow_copy2
1750         shadow:mountpoint = $shadow_mntdir
1751         shadow:snapdir = $shadow_tstdir/.snapshots
1752         shadow:snapsharepath = share
1753
1754 [shadow_fmt0]
1755         comment = Testing shadow:format with default option
1756         vfs object = shadow_copy2
1757         path = $shadow_shrdir
1758         read only = no
1759         guest ok = yes
1760         shadow:mountpoint = $shadow_mntdir
1761         shadow:basedir = $shadow_basedir
1762         shadow:snapdir = $shadow_basedir/.snapshots
1763         shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
1764
1765 [shadow_fmt1]
1766         comment = Testing shadow:format with only date component
1767         vfs object = shadow_copy2
1768         path = $shadow_shrdir
1769         read only = no
1770         guest ok = yes
1771         shadow:mountpoint = $shadow_mntdir
1772         shadow:basedir = $shadow_basedir
1773         shadow:snapdir = $shadow_basedir/.snapshots
1774         shadow:format = \@GMT-%Y-%m-%d
1775
1776 [shadow_fmt2]
1777         comment = Testing shadow:format with some hardcoded prefix
1778         vfs object = shadow_copy2
1779         path = $shadow_shrdir
1780         read only = no
1781         guest ok = yes
1782         shadow:mountpoint = $shadow_mntdir
1783         shadow:basedir = $shadow_basedir
1784         shadow:snapdir = $shadow_basedir/.snapshots
1785         shadow:format = snap\@GMT-%Y.%m.%d-%H.%M.%S
1786
1787 [shadow_fmt3]
1788         comment = Testing shadow:format with modified format
1789         vfs object = shadow_copy2
1790         path = $shadow_shrdir
1791         read only = no
1792         guest ok = yes
1793         shadow:mountpoint = $shadow_mntdir
1794         shadow:basedir = $shadow_basedir
1795         shadow:snapdir = $shadow_basedir/.snapshots
1796         shadow:format = \@GMT-%Y.%m.%d-%H_%M_%S-snap
1797
1798 [shadow_fmt4]
1799         comment = Testing shadow:snapprefix regex
1800         vfs object = shadow_copy2
1801         path = $shadow_shrdir
1802         read only = no
1803         guest ok = yes
1804         shadow:mountpoint = $shadow_mntdir
1805         shadow:basedir = $shadow_basedir
1806         shadow:snapdir = $shadow_basedir/.snapshots
1807         shadow:snapprefix = \^s[a-z]*p\$
1808         shadow:format = _GMT-%Y.%m.%d-%H.%M.%S
1809
1810 [shadow_fmt5]
1811         comment = Testing shadow:snapprefix with delim regex
1812         vfs object = shadow_copy2
1813         path = $shadow_shrdir
1814         read only = no
1815         guest ok = yes
1816         shadow:mountpoint = $shadow_mntdir
1817         shadow:basedir = $shadow_basedir
1818         shadow:snapdir = $shadow_basedir/.snapshots
1819         shadow:delimiter = \@GMT
1820         shadow:snapprefix = [a-z]*
1821         shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
1822
1823 [shadow_wl]
1824         path = $shadow_shrdir
1825         comment = previous versions with wide links allowed
1826         vfs objects = shadow_copy2
1827         shadow:mountpoint = $shadow_mntdir
1828         wide links = yes
1829 [dfq]
1830         path = $shrdir/dfree
1831         vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
1832         admin users = $unix_name
1833         include = $dfqconffile
1834 [dfq_owner]
1835         path = $shrdir/dfree
1836         vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
1837         inherit owner = yes
1838         include = $dfqconffile
1839 [acl_xattr_ign_sysacl_posix]
1840         copy = tmp
1841         acl_xattr:ignore system acls = yes
1842         acl_xattr:default acl style = posix
1843 [acl_xattr_ign_sysacl_windows]
1844         copy = tmp
1845         acl_xattr:ignore system acls = yes
1846         acl_xattr:default acl style = windows
1847
1848 [mangle_illegal]
1849         copy = tmp
1850         mangled names = illegal
1851         ";
1852         close(CONF);
1853
1854         unless (open(DFQCONF, ">$dfqconffile")) {
1855                 warn("Unable to open $dfqconffile");
1856                 return undef;
1857         }
1858         close(DFQCONF);
1859
1860         ##
1861         ## create a test account
1862         ##
1863
1864         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
1865            warn("Unable to open $nss_wrapper_passwd");
1866            return undef;
1867         }
1868         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
1869 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
1870 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1871 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1872 userdup:x:$uid_userdup:$gid_userdup:userdup gecos:$prefix_abs:/bin/false
1873 pdbtest_wkn:x:$uid_pdbtest_wkn:$gid_everyone:pdbtest_wkn gecos:$prefix_abs:/bin/false
1874 force_user:x:$uid_force_user:$gid_force_user:force user gecos:$prefix_abs:/bin/false
1875 smbget_user:x:$uid_smbget:$gid_domusers:smbget_user gecos:$prefix_abs:/bin/false
1876 user1:x:$uid_user1:$gid_nogroup:user1 gecos:$prefix_abs:/bin/false
1877 user2:x:$uid_user2:$gid_nogroup:user2 gecos:$prefix_abs:/bin/false
1878 ";
1879         if ($unix_uid != 0) {
1880                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
1881 ";
1882         }
1883         close(PASSWD);
1884
1885         unless (open(GROUP, ">$nss_wrapper_group")) {
1886              warn("Unable to open $nss_wrapper_group");
1887              return undef;
1888         }
1889         print GROUP "nobody:x:$gid_nobody:
1890 nogroup:x:$gid_nogroup:nobody
1891 $unix_name-group:x:$unix_gids[0]:
1892 domusers:X:$gid_domusers:
1893 domadmins:X:$gid_domadmins:
1894 userdup:x:$gid_userdup:$unix_name
1895 everyone:x:$gid_everyone:
1896 force_user:x:$gid_force_user:
1897 ";
1898         if ($unix_gids[0] != 0) {
1899                 print GROUP "root:x:$gid_root:
1900 ";
1901         }
1902
1903         close(GROUP);
1904
1905         ## hosts
1906         my $hostname = lc($server);
1907         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
1908                 warn("Unable to open $nss_wrapper_hosts");
1909                 return undef;
1910         }
1911         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
1912         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
1913         close(HOSTS);
1914
1915         ## hosts
1916         unless (open(RESOLV_CONF, ">$resolv_conf")) {
1917                 warn("Unable to open $resolv_conf");
1918                 return undef;
1919         }
1920         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
1921                 if (defined($dc_server_ip)) {
1922                         print RESOLV_CONF "nameserver $dc_server_ip\n";
1923                 }
1924                 if (defined($dc_server_ipv6)) {
1925                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
1926                 }
1927         } else {
1928                 print RESOLV_CONF "nameserver ${server_ip}\n";
1929                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
1930         }
1931         close(RESOLV_CONF);
1932
1933         foreach my $evlog (@eventlog_list) {
1934                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1935                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1936                 close(EVENTLOG);
1937         }
1938
1939         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1940         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1941         $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1942         $ENV{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1943         if ($ENV{SAMBA_DNS_FAKING}) {
1944                 $ENV{RESOLV_WRAPPER_CONF} = $resolv_conf;
1945         } else {
1946                 $ENV{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1947         }
1948
1949         createuser($self, $unix_name, $password, $conffile) || die("Unable to create user");
1950         createuser($self, "force_user", $password, $conffile) || die("Unable to create force_user");
1951         createuser($self, "smbget_user", $password, $conffile) || die("Unable to create smbget_user");
1952         createuser($self, "user1", $password, $conffile) || die("Unable to create user1");
1953         createuser($self, "user2", $password, $conffile) || die("Unable to create user2");
1954
1955         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
1956         print DNS_UPDATE_LIST "A $server. $server_ip\n";
1957         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
1958         close(DNS_UPDATE_LIST);
1959
1960         print "DONE\n";
1961
1962         $ret{SERVER_IP} = $server_ip;
1963         $ret{SERVER_IPV6} = $server_ipv6;
1964         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1965         $ret{NMBD_TEST_LOG_POS} = 0;
1966         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1967         $ret{WINBINDD_TEST_LOG_POS} = 0;
1968         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1969         $ret{SMBD_TEST_LOG_POS} = 0;
1970         $ret{SERVERCONFFILE} = $conffile;
1971         $ret{CONFIGURATION} ="-s $conffile";
1972         $ret{SERVER} = $server;
1973         $ret{USERNAME} = $unix_name;
1974         $ret{USERID} = $unix_uid;
1975         $ret{DOMAIN} = $domain;
1976         $ret{NETBIOSNAME} = $server;
1977         $ret{PASSWORD} = $password;
1978         $ret{PIDDIR} = $piddir;
1979         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
1980         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1981         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1982         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1983         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1984         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1985         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1986         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
1987         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
1988         if ($ENV{SAMBA_DNS_FAKING}) {
1989                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1990         } else {
1991                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
1992         }
1993         $ret{LOCAL_PATH} = "$shrdir";
1994         $ret{LOGDIR} = $logdir;
1995
1996         #
1997         # Avoid hitting system krb5.conf -
1998         # An env that needs Kerberos will reset this to the real
1999         # value.
2000         #
2001         $ret{KRB5_CONFIG} = abs_path($prefix) . "/no_krb5.conf";
2002
2003         # Define KRB5CCNAME for each environment we set up
2004         $ret{KRB5_CCACHE} = abs_path($prefix) . "/krb5ccache";
2005         $ENV{KRB5CCNAME} = $ret{KRB5_CCACHE};
2006
2007         return \%ret;
2008 }
2009
2010 sub wait_for_start($$$$$)
2011 {
2012         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
2013         my $ret;
2014
2015         if ($nmbd eq "yes") {
2016                 my $count = 0;
2017
2018                 # give time for nbt server to register its names
2019                 print "checking for nmbd\n";
2020
2021                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
2022                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
2023
2024                 do {
2025                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
2026                         if ($ret != 0) {
2027                                 sleep(1);
2028                         } else {
2029                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
2030                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
2031                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
2032                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
2033                         }
2034                         $count++;
2035                 } while ($ret != 0 && $count < 10);
2036                 if ($count == 10) {
2037                         print "NMBD not reachable after 10 retries\n";
2038                         teardown_env($self, $envvars);
2039                         return 0;
2040                 }
2041         }
2042
2043         if ($winbindd eq "yes") {
2044             print "checking for winbindd\n";
2045             my $count = 0;
2046             do {
2047                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
2048                 if ($ret != 0) {
2049                     sleep(1);
2050                 }
2051                 $count++;
2052             } while ($ret != 0 && $count < 20);
2053             if ($count == 20) {
2054                 print "WINBINDD not reachable after 20 seconds\n";
2055                 teardown_env($self, $envvars);
2056                 return 0;
2057             }
2058         }
2059
2060         if ($smbd eq "yes") {
2061             # make sure smbd is also up set
2062             print "wait for smbd\n";
2063
2064             my $count = 0;
2065             do {
2066                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
2067                 if ($ret != 0) {
2068                     sleep(1);
2069                 }
2070                 $count++
2071             } while ($ret != 0 && $count < 20);
2072             if ($count == 20) {
2073                 print "SMBD failed to start up in a reasonable time (20sec)\n";
2074                 teardown_env($self, $envvars);
2075                 return 0;
2076             }
2077         }
2078
2079         # Ensure we have domain users mapped.
2080         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
2081         if ($ret != 0) {
2082             return 1;
2083         }
2084         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
2085         if ($ret != 0) {
2086             return 1;
2087         }
2088         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add sid=S-1-1-0 unixgroup=everyone type=builtin");
2089         if ($ret != 0) {
2090             return 1;
2091         }
2092
2093         if ($winbindd eq "yes") {
2094             # note: creating builtin groups requires winbindd for the
2095             # unix id allocator
2096             $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
2097             if ($ret != 0) {
2098                 print "Failed to create BUILTIN\\Users group\n";
2099                 return 0;
2100             }
2101             my $count = 0;
2102             do {
2103                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
2104                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
2105                 if ($ret != 0) {
2106                     sleep(2);
2107                 }
2108                 $count++;
2109             } while ($ret != 0 && $count < 10);
2110             if ($count == 10) {
2111                 print "WINBINDD not reachable after 20 seconds\n";
2112                 teardown_env($self, $envvars);
2113                 return 0;
2114             }
2115         }
2116
2117         print $self->getlog_env($envvars);
2118
2119         return 1;
2120 }
2121
2122 1;