<?xml version="1.0" encoding="iso-8859-1"?>
-<!DOCTYPE refentry PUBLIC "-//Samba-Team//DTD DocBook V4.2-Based Variant V1.0//EN" "http://www.samba.org/samba/DTD/samba-doc">
+<!DOCTYPE refentry
+ PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
+ "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">
<refentry id="ctdb.1">
-<refmeta>
- <refentrytitle>ctdb</refentrytitle>
- <manvolnum>1</manvolnum>
-</refmeta>
-
-
-<refnamediv>
- <refname>ctdb</refname>
- <refpurpose>clustered tdb database management utility</refpurpose>
-</refnamediv>
-
-<refsynopsisdiv>
- <cmdsynopsis>
- <command>ctdb [ OPTIONS ] COMMAND ...</command>
- </cmdsynopsis>
-
- <cmdsynopsis>
- <command>ctdb</command>
- <arg choice="opt">-n <node></arg>
- <arg choice="opt">-Y</arg>
- <arg choice="opt">-t <timeout></arg>
- <arg choice="opt">-T <timelimit></arg>
- <arg choice="opt">-? --help</arg>
- <arg choice="opt">--usage</arg>
- <arg choice="opt">-d --debug=<INTEGER></arg>
- <arg choice="opt">--socket=<filename></arg>
- </cmdsynopsis>
-
-</refsynopsisdiv>
-
- <refsect1><title>DESCRIPTION</title>
+ <refentryinfo>
+ <author>
+ <contrib>
+ This documentation was written by
+ Ronnie Sahlberg,
+ Amitay Isaacs,
+ Martin Schwenke
+ </contrib>
+ </author>
+
+ <copyright>
+ <year>2007</year>
+ <holder>Andrew Tridgell</holder>
+ <holder>Ronnie Sahlberg</holder>
+ </copyright>
+ <legalnotice>
+ <para>
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License as
+ published by the Free Software Foundation; either version 3 of
+ the License, or (at your option) any later version.
+ </para>
+ <para>
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ PURPOSE. See the GNU General Public License for more details.
+ </para>
+ <para>
+ You should have received a copy of the GNU General Public
+ License along with this program; if not, see
+ <ulink url="http://www.gnu.org/licenses"/>.
+ </para>
+ </legalnotice>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>ctdb</refentrytitle>
+ <manvolnum>1</manvolnum>
+ <refmiscinfo class="source">ctdb</refmiscinfo>
+ <refmiscinfo class="manual">CTDB - clustered TDB database</refmiscinfo>
+ </refmeta>
+
+ <refnamediv>
+ <refname>ctdb</refname>
+ <refpurpose>CTDB management utility</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <cmdsynopsis>
+ <command>ctdb</command>
+ <arg rep="repeat"><replaceable>OPTION</replaceable></arg>
+ <arg choice="req"><replaceable>COMMAND</replaceable></arg>
+ <arg choice="opt"><replaceable>COMMAND-ARGS</replaceable></arg>
+ </cmdsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>DESCRIPTION</title>
<para>
- ctdb is a utility to view and manage a ctdb cluster.
+ ctdb is a utility to view and manage a CTDB cluster.
</para>
- </refsect1>
+ <para>
+ The following terms are used when referring to nodes in a
+ cluster:
+ <variablelist>
+ <varlistentry>
+ <term>PNN</term>
+ <listitem>
+ <para>
+ Physical Node Number. The physical node number is an
+ integer that describes the node in the cluster. The
+ first node has physical node number 0. in a cluster.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>PNN-LIST</term>
+ <listitem>
+ <para>
+ This is either a single PNN, a comma-separate list of PNNs
+ or "all".
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </para>
+
+ <para>
+ Commands that reference a database use the following terms:
+ <variablelist>
+ <varlistentry>
+ <term>DB</term>
+ <listitem>
+ <para>
+ This is either a database name, such as
+ <filename>locking.tdb</filename> or a database ID such
+ as "0x42fe72c5".
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>DB-LIST</term>
+ <listitem>
+ <para>
+ A space separated list of at least one
+ <parameter>DB</parameter>.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </para>
+ </refsect1>
<refsect1>
<title>OPTIONS</title>
<variablelist>
- <varlistentry><term>-n <pnn></term>
- <listitem>
- <para>
- This specifies the physical node number on which to execute the
- command. Default is to run the command on the deamon running on
- the local host.
- </para>
- <para>
- The physical node number is an integer that describes the node in the
- cluster. The first node has physical node number 0.
- </para>
- </listitem>
+ <varlistentry><term>-n <parameter>PNN-LIST</parameter></term>
+ <listitem>
+ <para>
+ The nodes specified by PNN-LIST should be queried for the
+ requested information. Default is to query the daemon
+ running on the local host.
+ </para>
+ </listitem>
</varlistentry>
<varlistentry><term>-Y</term>
- <listitem>
- <para>
- Produce output in machine readable form for easier parsing by scripts. Not all commands support this option.
- </para>
- </listitem>
+ <listitem>
+ <para>
+ Produce output in machine readable form for easier parsing
+ by scripts. This uses a field delimiter of ':'. Not all
+ commands support this option.
+ </para>
+ </listitem>
</varlistentry>
- <varlistentry><term>-t <timeout></term>
- <listitem>
- <para>
- How long should ctdb wait for the local ctdb daemon to respond to a command before timing out. Default is 3 seconds.
- </para>
- </listitem>
+ <varlistentry><term>-x <parameter>SEPARATOR</parameter></term>
+ <listitem>
+ <para>
+ Use SEPARATOR to delimit fields in machine readable output.
+ This implies -Y.
+ </para>
+ </listitem>
</varlistentry>
- <varlistentry><term>-T <timelimit></term>
- <listitem>
- <para>
- A limit on how long the ctdb command will run for before it will
- be aborted. When this timelimit has been exceeded the ctdb command will
- terminate.
- </para>
- </listitem>
+ <varlistentry><term>-X</term>
+ <listitem>
+ <para>
+ Produce output in machine readable form for easier parsing
+ by scripts. This uses a field delimiter of '|'. Not all
+ commands support this option.
+ </para>
+ <para>
+ This is equivalent to "-x|" and avoids some shell quoting
+ issues.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>-t <parameter>TIMEOUT</parameter></term>
+ <listitem>
+ <para>
+ Indicates that ctdb should wait up to TIMEOUT seconds for
+ a response to most commands sent to the CTDB daemon. The
+ default is 10 seconds.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>-T <parameter>TIMELIMIT</parameter></term>
+ <listitem>
+ <para>
+ Indicates that TIMELIMIT is the maximum run time (in
+ seconds) for the ctdb command. When TIMELIMIT is exceeded
+ the ctdb command will terminate with an error. The default
+ is 120 seconds.
+ </para>
+ </listitem>
</varlistentry>
<varlistentry><term>-? --help</term>
- <listitem>
- Print some help text to the screen.
- </para>
- </listitem>
+ <listitem>
+ <para>
+ Print some help text to the screen.
+ </para>
+ </listitem>
</varlistentry>
<varlistentry><term>--usage</term>
- <listitem>
- Print useage information to the screen.
- </para>
- </listitem>
+ <listitem>
+ <para>
+ Print useage information to the screen.
+ </para>
+ </listitem>
</varlistentry>
- <varlistentry><term>-d --debug=<debuglevel></term>
- <listitem>
- Change the debug level for the command. Default is 0.
- </para>
- </listitem>
+ <varlistentry><term>-d --debug=<parameter>DEBUGLEVEL</parameter></term>
+ <listitem>
+ <para>
+ Change the debug level for the command. Default is NOTICE (2).
+ </para>
+ </listitem>
</varlistentry>
- <varlistentry><term>--socket=<filename></term>
- <listitem>
- <para>
- Specify the socketname to use when connecting to the local ctdb
- daemon. The default is /tmp/ctdb.socket .
- </para>
- <para>
- You only need to specify this parameter if you run multiple ctdb
- daemons on the same physical host and thus can not use the default
- name for the domain socket.
- </para>
- </listitem>
+ <varlistentry><term>--socket=<parameter>FILENAME</parameter></term>
+ <listitem>
+ <para>
+ Specify that FILENAME is the name of the Unix domain
+ socket to use when connecting to the local CTDB
+ daemon. The default is
+ <filename>/usr/local/var/run/ctdb/ctdbd.socket</filename>.
+ </para>
+ </listitem>
</varlistentry>
-
</variablelist>
</refsect1>
- <refsect1><title>Administrative Commands</title>
+ <refsect1>
+ <title>ADMINISTRATIVE COMMANDS</title>
<para>
- These are commands used to monitor and administrate a CTDB cluster.
+ These are commands used to monitor and administer a CTDB cluster.
</para>
- <refsect2><title>pnn</title>
- <para>
- This command displays the pnn of the current node.
- </para>
- </refsect2>
-
- <refsect2><title>status</title>
- <para>
- This command shows the current status of the ctdb node.
- </para>
-
- <refsect3><title>node status</title>
- <para>
- Node status reflects the current status of the node. There are five possible states:
- </para>
- <para>
- OK - This node is fully functional.
- </para>
- <para>
- DISCONNECTED - This node could not be connected through the network and is currently not participating in the cluster. If there is a public IP address associated with this node it should have been taken over by a different node. No services are running on this node.
- </para>
- <para>
- DISABLED - This node has been administratively disabled. This node is still functional and participates in the CTDB cluster but its IP addresses have been taken over by a different node and no services are currently being hosted.
- </para>
- UNHEALTHY - A service provided by this node is malfunctioning and should be investigated. The CTDB daemon itself is operational and participates in the cluster. Its public IP address has been taken over by a different node and no services are currnetly being hosted. All unhealthy nodes should be investigated and require an administrative action to rectify.
- </para>
- <para>
- BANNED - This node failed too many recovery attempts and has been banned from participating in the cluster for a period of RecoveryBanPeriod seconds. Any public IP address has been taken over by other nodes. This node does not provide any services. All banned nodes should be investigated and require an administrative action to rectify. This node does not perticipate in the CTDB cluster but can still be communicated with. I.e. ctdb commands can be sent to it.
- </para>
- <para>
- STOPPED - A node that is stopped does not host any public ip addresses,
- nor is it part of the VNNMAP. A stopped node can not become LVSMASTER,
- RECMASTER or NATGW.
- This node does not perticipate in the CTDB cluster but can still be
- communicated with. I.e. ctdb commands can be sent to it.
- </para>
+ <refsect2>
+ <title>pnn</title>
+ <para>
+ This command displays the PNN of the current node.
+ </para>
+ </refsect2>
+
+ <refsect2>
+ <title>xpnn</title>
+ <para>
+ This command displays the PNN of the current node without
+ contacting the CTDB daemon. It parses the nodes file
+ directly, so can produce unexpected output if the nodes file
+ has been edited but has not been reloaded.
+ </para>
+ </refsect2>
+
+ <refsect2>
+ <title>status</title>
+ <para>
+ This command shows the current status of all CTDB nodes based
+ on information from the queried node.
+ </para>
+
+ <para>
+ Note: If the the queried node is INACTIVE then the status
+ might not be current.
+ </para>
+
+ <refsect3>
+ <title>Node status</title>
+ <para>
+ This includes the number of physical nodes and the status of
+ each node. See <citerefentry><refentrytitle>ctdb</refentrytitle>
+ <manvolnum>7</manvolnum></citerefentry> for information
+ about node states.
+ </para>
</refsect3>
- <refsect3><title>generation</title>
- <para>
- The generation id is a number that indicates the current generation
- of a cluster instance. Each time a cluster goes through a
- reconfiguration or a recovery its generation id will be changed.
- </para>
- <para>
- This number does not have any particular meaning other than to keep
- track of when a cluster has gone through a recovery. It is a random
- number that represents the current instance of a ctdb cluster
- and its databases.
- CTDBD uses this number internally to be able to tell when commands
- to operate on the cluster and the databases was issued in a different
- generation of the cluster, to ensure that commands that operate
- on the databases will not survive across a cluster database recovery.
- After a recovery, all old outstanding commands will automatically
- become invalid.
- </para>
- <para>
+ <refsect3>
+ <title>Generation</title>
+ <para>
+ The generation id is a number that indicates the current generation
+ of a cluster instance. Each time a cluster goes through a
+ reconfiguration or a recovery its generation id will be changed.
+ </para>
+ <para>
+ This number does not have any particular meaning other than
+ to keep track of when a cluster has gone through a
+ recovery. It is a random number that represents the current
+ instance of a ctdb cluster and its databases. The CTDB
+ daemon uses this number internally to be able to tell when
+ commands to operate on the cluster and the databases was
+ issued in a different generation of the cluster, to ensure
+ that commands that operate on the databases will not survive
+ across a cluster database recovery. After a recovery, all
+ old outstanding commands will automatically become invalid.
+ </para>
+ <para>
Sometimes this number will be shown as "INVALID". This only means that
the ctdbd daemon has started but it has not yet merged with the cluster through a recovery.
All nodes start with generation "INVALID" and are not assigned a real
generation id until they have successfully been merged with a cluster
through a recovery.
- </para>
+ </para>
</refsect3>
- <refsect3><title>VNNMAP</title>
- <para>
- The list of Virtual Node Numbers. This is a list of all nodes that actively participates in the cluster and that share the workload of hosting the Clustered TDB database records.
- Only nodes that are participating in the vnnmap can become lmaster or dmaster for a database record.
- </para>
+ <refsect3>
+ <title>Virtual Node Number (VNN) map</title>
+ <para>
+ Consists of the number of virtual nodes and mapping from
+ virtual node numbers to physical node numbers. Virtual
+ nodes host CTDB databases. Only nodes that are
+ participating in the VNN map can become lmaster or dmaster
+ for database records.
+ </para>
</refsect3>
- <refsect3><title>Recovery mode</title>
- <para>
- This is the current recovery mode of the cluster. There are two possible modes:
- </para>
- <para>
- NORMAL - The cluster is fully operational.
- </para>
- <para>
- RECOVERY - The cluster databases have all been frozen, pausing all services while the cluster awaits a recovery process to complete. A recovery process should finish within seconds. If a cluster is stuck in the RECOVERY state this would indicate a cluster malfunction which needs to be investigated.
- </para>
+ <refsect3>
+ <title>Recovery mode</title>
+ <para>
+ This is the current recovery mode of the cluster. There are two possible modes:
+ </para>
+ <para>
+ NORMAL - The cluster is fully operational.
+ </para>
+ <para>
+ RECOVERY - The cluster databases have all been frozen, pausing all services while the cluster awaits a recovery process to complete. A recovery process should finish within seconds. If a cluster is stuck in the RECOVERY state this would indicate a cluster malfunction which needs to be investigated.
+ </para>
<para>
- Once the recovery master detects an inconsistency, for example a node
- becomes disconnected/connected, the recovery daemon will trigger a
- cluster recovery process, where all databases are remerged across the
- cluster. When this process starts, the recovery master will first
- "freeze" all databases to prevent applications such as samba from
- accessing the databases and it will also mark the recovery mode as
- RECOVERY.
+ Once the recovery master detects an inconsistency, for example a node
+ becomes disconnected/connected, the recovery daemon will trigger a
+ cluster recovery process, where all databases are remerged across the
+ cluster. When this process starts, the recovery master will first
+ "freeze" all databases to prevent applications such as samba from
+ accessing the databases and it will also mark the recovery mode as
+ RECOVERY.
</para>
<para>
- When CTDBD starts up, it will start in RECOVERY mode.
- Once the node has been merged into a cluster and all databases
- have been recovered, the node mode will change into NORMAL mode
- and the databases will be "thawed", allowing samba to access the
- databases again.
+ When the CTDB daemon starts up, it will start in RECOVERY
+ mode. Once the node has been merged into a cluster and all
+ databases have been recovered, the node mode will change into
+ NORMAL mode and the databases will be "thawed", allowing samba
+ to access the databases again.
</para>
</refsect3>
-
- <refsect3><title>Recovery master</title>
- This is the cluster node that is currently designated as the recovery master. This node is responsible of monitoring the consistency of the cluster and to perform the actual recovery process when reqired.
- </para>
- Only one node at a time can be the designated recovery master. Which
- node is designated the recovery master is decided by an election
- process in the recovery daemons running on each node.
- </para>
+ <refsect3>
+ <title>Recovery master</title>
+ <para>
+ This is the cluster node that is currently designated as the recovery master. This node is responsible of monitoring the consistency of the cluster and to perform the actual recovery process when reqired.
+ </para>
+ <para>
+ Only one node at a time can be the designated recovery master. Which
+ node is designated the recovery master is decided by an election
+ process in the recovery daemons running on each node.
+ </para>
</refsect3>
- <para>
- Example: ctdb status
- </para>
- <para>Example output:</para>
- <screen format="linespecific">
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb status
Number of nodes:4
-pnn:0 11.1.2.200 OK (THIS NODE)
-pnn:1 11.1.2.201 OK
-pnn:2 11.1.2.202 OK
-pnn:3 11.1.2.203 OK
+pnn:0 192.168.2.200 OK (THIS NODE)
+pnn:1 192.168.2.201 OK
+pnn:2 192.168.2.202 OK
+pnn:3 192.168.2.203 OK
Generation:1362079228
Size:4
hash:0 lmaster:0
hash:3 lmaster:3
Recovery mode:NORMAL (0)
Recovery master:0
- </screen>
+ </screen>
+ </refsect3>
</refsect2>
- <refsect2><title>recmaster</title>
+ <refsect2>
+ <title>nodestatus <optional><parameter>PNN-LIST</parameter></optional></title>
+ <para>
+ This command is similar to the <command>status</command>
+ command. It displays the "node status" subset of output. The
+ main differences are:
+ </para>
+
+ <itemizedlist>
+ <listitem>
+ <para>
+ The exit code is the bitwise-OR of the flags for each
+ specified node, while <command>ctdb status</command> exits
+ with 0 if it was able to retrieve status for all nodes.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ <command>ctdb status</command> provides status information
+ for all nodes. <command>ctdb nodestatus</command>
+ defaults to providing status for only the current node.
+ If PNN-LIST is provided then status is given for
+ the indicated node(s).
+ </para>
+ </listitem>
+ </itemizedlist>
+
<para>
- This command shows the pnn of the node which is currently the recmaster.
+ A common invocation in scripts is <command>ctdb nodestatus
+ all</command> to check whether all nodes in a cluster are
+ healthy.
</para>
+
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb nodestatus
+pnn:0 10.0.0.30 OK (THIS NODE)
+
+# ctdb nodestatus all
+Number of nodes:2
+pnn:0 10.0.0.30 OK (THIS NODE)
+pnn:1 10.0.0.31 OK
+ </screen>
+ </refsect3>
</refsect2>
- <refsect2><title>uptime</title>
+ <refsect2>
+ <title>recmaster</title>
<para>
- This command shows the uptime for the ctdb daemon. When the last recovery or ip-failover completed and how long it took. If the "duration" is shown as a negative number, this indicates that there is a recovery/failover in progress and it started that many seconds ago.
+ This command shows the pnn of the node which is currently the recmaster.
</para>
<para>
- Example: ctdb uptime
+ Note: If the the queried node is INACTIVE then the status
+ might not be current.
</para>
- <para>Example output:</para>
- <screen format="linespecific">
+ </refsect2>
+
+ <refsect2>
+ <title>uptime</title>
+ <para>
+ This command shows the uptime for the ctdb daemon. When the last recovery or ip-failover completed and how long it took. If the "duration" is shown as a negative number, this indicates that there is a recovery/failover in progress and it started that many seconds ago.
+ </para>
+
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb uptime
Current time of node : Thu Oct 29 10:38:54 2009
Ctdbd start time : (000 16:54:28) Wed Oct 28 17:44:26 2009
Time of last recovery/failover: (000 16:53:31) Wed Oct 28 17:45:23 2009
Duration of last recovery/failover: 2.248552 seconds
- </screen>
+ </screen>
+ </refsect3>
</refsect2>
- <refsect2><title>listnodes</title>
+ <refsect2>
+ <title>listnodes</title>
<para>
- This command shows lists the ip addresses of all the nodes in the cluster.
+ This command shows lists the ip addresses of all the nodes in the cluster.
</para>
- <para>
- Example: ctdb listnodes
- </para>
- <para>Example output:</para>
- <screen format="linespecific">
-10.0.0.71
-10.0.0.72
-10.0.0.73
-10.0.0.74
- </screen>
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb listnodes
+192.168.2.200
+192.168.2.201
+192.168.2.202
+192.168.2.203
+ </screen>
+ </refsect3>
</refsect2>
- <refsect2><title>ping</title>
- <para>
- This command will "ping" all CTDB daemons in the cluster to verify that they are processing commands correctly.
- </para>
+ <refsect2>
+ <title>natgwlist</title>
<para>
- Example: ctdb ping
+ Show the current NAT gateway master and the status of all
+ nodes in the current NAT gateway group. See the
+ <citetitle>NAT GATEWAY</citetitle> section in
+ <citerefentry><refentrytitle>ctdb</refentrytitle>
+ <manvolnum>7</manvolnum></citerefentry> for more details.
</para>
+
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb natgwlist
+0 192.168.2.200
+Number of nodes:4
+pnn:0 192.168.2.200 OK (THIS NODE)
+pnn:1 192.168.2.201 OK
+pnn:2 192.168.2.202 OK
+pnn:3 192.168.2.203 OK
+ </screen>
+ </refsect3>
+ </refsect2>
+
+ <refsect2>
+ <title>ping</title>
<para>
- Example output:
+ This command will "ping" specified CTDB nodes in the cluster
+ to verify that they are running.
</para>
- <screen format="linespecific">
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb ping
response from 0 time=0.000054 sec (3 clients)
-response from 1 time=0.000144 sec (2 clients)
-response from 2 time=0.000105 sec (2 clients)
-response from 3 time=0.000114 sec (2 clients)
- </screen>
+ </screen>
+ </refsect3>
</refsect2>
- <refsect2><title>ip</title>
- <para>
- This command will display the list of public addresses that are provided by the cluster and which physical node is currently serving this ip. By default this command will ONLY show those public addresses that are known to the node itself. To see the full list of all public ips across the cluster you must use "ctdb ip -n all".
- </para>
- <para>
- Example: ctdb ip
- </para>
- <para>
- Example output:
- </para>
- <screen format="linespecific">
-Number of addresses:4
-12.1.1.1 0
-12.1.1.2 1
-12.1.1.3 2
-12.1.1.4 3
- </screen>
+ <refsect2>
+ <title>ifaces</title>
+ <para>
+ This command will display the list of network interfaces, which could
+ host public addresses, along with their status.
+ </para>
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb ifaces
+Interfaces on node 0
+name:eth5 link:up references:2
+name:eth4 link:down references:0
+name:eth3 link:up references:1
+name:eth2 link:up references:1
+
+# ctdb -X ifaces
+|Name|LinkStatus|References|
+|eth5|1|2|
+|eth4|0|0|
+|eth3|1|1|
+|eth2|1|1|
+ </screen>
+ </refsect3>
</refsect2>
- <refsect2><title>scriptstatus</title>
- <para>
- This command displays which scripts where run in the previous monitoring cycle and the result of each script. If a script failed with an error, causing the node to become unhealthy, the output from that script is also shown.
- </para>
- <para>
- Example: ctdb scriptstatus
- </para>
+ <refsect2>
+ <title>ip</title>
+ <para>
+ This command will display the list of public addresses that are provided by the cluster and which physical node is currently serving this ip. By default this command will ONLY show those public addresses that are known to the node itself. To see the full list of all public ips across the cluster you must use "ctdb ip all".
+ </para>
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb ip -v
+Public IPs on node 0
+172.31.91.82 node[1] active[] available[eth2,eth3] configured[eth2,eth3]
+172.31.91.83 node[0] active[eth3] available[eth2,eth3] configured[eth2,eth3]
+172.31.91.84 node[1] active[] available[eth2,eth3] configured[eth2,eth3]
+172.31.91.85 node[0] active[eth2] available[eth2,eth3] configured[eth2,eth3]
+172.31.92.82 node[1] active[] available[eth5] configured[eth4,eth5]
+172.31.92.83 node[0] active[eth5] available[eth5] configured[eth4,eth5]
+172.31.92.84 node[1] active[] available[eth5] configured[eth4,eth5]
+172.31.92.85 node[0] active[eth5] available[eth5] configured[eth4,eth5]
+
+# ctdb -X ip -v
+|Public IP|Node|ActiveInterface|AvailableInterfaces|ConfiguredInterfaces|
+|172.31.91.82|1||eth2,eth3|eth2,eth3|
+|172.31.91.83|0|eth3|eth2,eth3|eth2,eth3|
+|172.31.91.84|1||eth2,eth3|eth2,eth3|
+|172.31.91.85|0|eth2|eth2,eth3|eth2,eth3|
+|172.31.92.82|1||eth5|eth4,eth5|
+|172.31.92.83|0|eth5|eth5|eth4,eth5|
+|172.31.92.84|1||eth5|eth4,eth5|
+|172.31.92.85|0|eth5|eth5|eth4,eth5|
+ </screen>
+ </refsect3>
+ </refsect2>
+
+ <refsect2>
+ <title>ipinfo <parameter>IP</parameter></title>
+ <para>
+ This command will display details about the specified public addresses.
+ </para>
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb ipinfo 172.31.92.85
+Public IP[172.31.92.85] info on node 0
+IP:172.31.92.85
+CurrentNode:0
+NumInterfaces:2
+Interface[1]: Name:eth4 Link:down References:0
+Interface[2]: Name:eth5 Link:up References:2 (active)
+ </screen>
+ </refsect3>
+ </refsect2>
+
+ <refsect2>
+ <title>scriptstatus</title>
<para>
- Example output:
+ This command displays which scripts where run in the previous monitoring cycle and the result of each script. If a script failed with an error, causing the node to become unhealthy, the output from that script is also shown.
</para>
- <screen format="linespecific">
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb scriptstatus
7 scripts were executed last monitoring cycle
00.ctdb Status:OK Duration:0.056 Tue Mar 24 18:56:57 2009
10.interface Status:OK Duration:0.077 Tue Mar 24 18:56:57 2009
40.vsftpd Status:OK Duration:0.045 Tue Mar 24 18:56:57 2009
41.httpd Status:OK Duration:0.039 Tue Mar 24 18:56:57 2009
50.samba Status:ERROR Duration:0.082 Tue Mar 24 18:56:57 2009
- OUTPUT:ERROR: Samba tcp port 445 is not responding
+OUTPUT:ERROR: Samba tcp port 445 is not responding
</screen>
+ </refsect3>
</refsect2>
- <refsect2><title>disablescript <script></title>
+ <refsect2>
+ <title>disablescript <parameter>SCRIPT</parameter></title>
<para>
This command is used to disable an eventscript.
</para>
</para>
</refsect2>
- <refsect2><title>enablescript <script></title>
+ <refsect2>
+ <title>enablescript <parameter>SCRIPT</parameter></title>
<para>
This command is used to enable an eventscript.
</para>
</para>
</refsect2>
- <refsect2><title>getvar <name></title>
- <para>
- Get the runtime value of a tuneable variable.
- </para>
- <para>
- Example: ctdb getvar MaxRedirectCount
- </para>
- <para>
- Example output:
- </para>
- <screen format="linespecific">
-MaxRedirectCount = 3
- </screen>
+ <refsect2>
+ <title>listvars</title>
+ <para>
+ List all tuneable variables, except the values of the obsolete tunables
+ like VacuumMinInterval. The obsolete tunables can be retrieved only
+ explicitly with the "ctdb getvar" command.
+ </para>
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb listvars
+MaxRedirectCount = 3
+SeqnumInterval = 1000
+ControlTimeout = 60
+TraverseTimeout = 20
+KeepaliveInterval = 5
+KeepaliveLimit = 5
+RecoverTimeout = 20
+RecoverInterval = 1
+ElectionTimeout = 3
+TakeoverTimeout = 9
+MonitorInterval = 15
+TickleUpdateInterval = 20
+EventScriptTimeout = 30
+MonitorTimeoutCount = 1
+RecoveryGracePeriod = 120
+RecoveryBanPeriod = 300
+DatabaseHashSize = 100001
+DatabaseMaxDead = 5
+RerecoveryTimeout = 10
+EnableBans = 1
+DeterministicIPs = 0
+LCP2PublicIPs = 1
+ReclockPingPeriod = 60
+NoIPFailback = 0
+DisableIPFailover = 0
+VerboseMemoryNames = 0
+RecdPingTimeout = 60
+RecdFailCount = 10
+LogLatencyMs = 0
+RecLockLatencyMs = 1000
+RecoveryDropAllIPs = 120
+VacuumInterval = 10
+VacuumMaxRunTime = 30
+RepackLimit = 10000
+VacuumLimit = 5000
+VacuumFastPathCount = 60
+MaxQueueDropMsg = 1000000
+UseStatusEvents = 0
+AllowUnhealthyDBRead = 0
+StatHistoryInterval = 1
+DeferredAttachTO = 120
+AllowClientDBAttach = 1
+RecoverPDBBySeqNum = 0
+ </screen>
+ </refsect3>
</refsect2>
- <refsect2><title>setvar <name> <value></title>
+ <refsect2>
+ <title>getvar <parameter>NAME</parameter></title>
<para>
- Set the runtime value of a tuneable variable.
- </para>
- <para>
- Example: ctdb setvar MaxRedirectCount 5
+ Get the runtime value of a tuneable variable.
</para>
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb getvar MaxRedirectCount
+MaxRedirectCount = 3
+ </screen>
+ </refsect3>
</refsect2>
- <refsect2><title>listvars</title>
+ <refsect2>
+ <title>setvar <parameter>NAME</parameter> <parameter>VALUE</parameter></title>
<para>
- List all tuneable variables.
+ Set the runtime value of a tuneable variable.
</para>
<para>
- Example: ctdb listvars
- </para>
- <para>
- Example output:
+ Example: ctdb setvar MaxRedirectCount 5
</para>
- <screen format="linespecific">
-MaxRedirectCount = 5
-SeqnumFrequency = 1
-ControlTimeout = 60
-TraverseTimeout = 20
-KeepaliveInterval = 2
-KeepaliveLimit = 3
-MaxLACount = 7
-RecoverTimeout = 5
-RecoverInterval = 1
-ElectionTimeout = 3
-TakeoverTimeout = 5
-MonitorInterval = 15
-EventScriptTimeout = 20
-RecoveryGracePeriod = 60
-RecoveryBanPeriod = 300
- </screen>
</refsect2>
- <refsect2><title>lvsmaster</title>
+ <refsect2>
+ <title>lvsmaster</title>
<para>
- This command shows which node is currently the LVSMASTER. The
- LVSMASTER is the node in the cluster which drives the LVS system and
- which receives all incoming traffic from clients.
+ This command shows which node is currently the LVSMASTER. The
+ LVSMASTER is the node in the cluster which drives the LVS system and
+ which receives all incoming traffic from clients.
</para>
<para>
- LVS is the mode where the entire CTDB/Samba cluster uses a single
- ip address for the entire cluster. In this mode all clients connect to
- one specific node which will then multiplex/loadbalance the clients
- evenly onto the other nodes in the cluster. This is an alternative to using
- public ip addresses. See the manpage for ctdbd for more information
- about LVS.
+ LVS is the mode where the entire CTDB/Samba cluster uses a single
+ ip address for the entire cluster. In this mode all clients connect to
+ one specific node which will then multiplex/loadbalance the clients
+ evenly onto the other nodes in the cluster. This is an alternative to using
+ public ip addresses. See the manpage for ctdbd for more information
+ about LVS.
</para>
</refsect2>
- <refsect2><title>lvs</title>
+ <refsect2>
+ <title>lvs</title>
<para>
- This command shows which nodes in the cluster are currently active in the
- LVS configuration. I.e. which nodes we are currently loadbalancing
- the single ip address across.
+ This command shows which nodes in the cluster are currently active in the
+ LVS configuration. I.e. which nodes we are currently loadbalancing
+ the single ip address across.
</para>
<para>
- LVS will by default only loadbalance across those nodes that are both
- LVS capable and also HEALTHY. Except if all nodes are UNHEALTHY in which
- case LVS will loadbalance across all UNHEALTHY nodes as well.
- LVS will never use nodes that are DISCONNECTED, STOPPED, BANNED or
- DISABLED.
+ LVS will by default only loadbalance across those nodes that are both
+ LVS capable and also HEALTHY. Except if all nodes are UNHEALTHY in which
+ case LVS will loadbalance across all UNHEALTHY nodes as well.
+ LVS will never use nodes that are DISCONNECTED, STOPPED, BANNED or
+ DISABLED.
</para>
<para>
Example output:
</para>
- <screen format="linespecific">
+ <screen>
2:10.0.0.13
3:10.0.0.14
</screen>
</refsect2>
- <refsect2><title>getcapabilities</title>
- <para>
- This command shows the capabilities of the current node.
- Please see manpage for ctdbd for a full list of all capabilities and
- more detailed description.
- </para>
-
- <para>
- RECMASTER and LMASTER capabilities are primarily used when CTDBD
- is used to create a cluster spanning across WAN links. In which case
- ctdbd acts as a WAN accelerator.
- </para>
+ <refsect2>
+ <title>getcapabilities</title>
<para>
- LVS capabile means that the node is participating in LVS, a mode
- where the entire CTDB cluster uses one single ip address for the
- entire cluster instead of using public ip address failover.
- This is an alternative to using a loadbalancing layer-4 switch.
+ This command shows the capabilities of the current node. See
+ the <citetitle>CAPABILITIES</citetitle> section in
+ <citerefentry><refentrytitle>ctdb</refentrytitle>
+ <manvolnum>7</manvolnum></citerefentry> for more details.
</para>
<para>
Example output:
</para>
- <screen format="linespecific">
+ <screen>
RECMASTER: YES
LMASTER: YES
LVS: NO
</refsect2>
- <refsect2><title>statistics</title>
+ <refsect2>
+ <title>statistics</title>
<para>
- Collect statistics from the CTDB daemon about how many calls it has served.
+ Collect statistics from the CTDB daemon about
+ how many calls it has served. Information about
+ various fields in statistics can be found in
+ <citerefentry><refentrytitle>ctdb-statistics</refentrytitle>
+ <manvolnum>7</manvolnum></citerefentry>.
</para>
- <para>
- Example: ctdb statistics
- </para>
- <para>
- Example output:
- </para>
- <screen format="linespecific">
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb statistics
CTDB version 1
- num_clients 3
- frozen 0
- recovering 0
- client_packets_sent 360489
- client_packets_recv 360466
- node_packets_sent 480931
- node_packets_recv 240120
- keepalive_packets_sent 4
- keepalive_packets_recv 3
- node
- req_call 2
- reply_call 2
- req_dmaster 0
- reply_dmaster 0
- reply_error 0
- req_message 42
- req_control 120408
- reply_control 360439
- client
- req_call 2
- req_message 24
- req_control 360440
- timeouts
- call 0
- control 0
- traverse 0
- total_calls 2
- pending_calls 0
- lockwait_calls 0
- pending_lockwait_calls 0
- memory_used 5040
- max_hop_count 0
- max_call_latency 4.948321 sec
- max_lockwait_latency 0.000000 sec
- </screen>
+num_clients 3
+frozen 0
+recovering 0
+client_packets_sent 360489
+client_packets_recv 360466
+node_packets_sent 480931
+node_packets_recv 240120
+keepalive_packets_sent 4
+keepalive_packets_recv 3
+node
+req_call 2
+reply_call 2
+req_dmaster 0
+reply_dmaster 0
+reply_error 0
+req_message 42
+req_control 120408
+reply_control 360439
+client
+req_call 2
+req_message 24
+req_control 360440
+timeouts
+call 0
+control 0
+traverse 0
+total_calls 2
+pending_calls 0
+lockwait_calls 0
+pending_lockwait_calls 0
+memory_used 5040
+max_hop_count 0
+max_call_latency 4.948321 sec
+max_lockwait_latency 0.000000 sec
+ </screen>
+ </refsect3>
</refsect2>
- <refsect2><title>statisticsreset</title>
+ <refsect2>
+ <title>statisticsreset</title>
<para>
- This command is used to clear all statistics counters in a node.
+ This command is used to clear all statistics counters in a node.
</para>
<para>
Example: ctdb statisticsreset
</para>
</refsect2>
- <refsect2><title>getreclock</title>
+ <refsect2>
+ <title>dbstatistics <parameter>DB</parameter></title>
+ <para>
+ Display statistics about the database DB. Information
+ about various fields in dbstatistics can be found in
+ <citerefentry><refentrytitle>ctdb-statistics</refentrytitle>
+ <manvolnum>7</manvolnum></citerefentry>.
+ </para>
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb dbstatistics locking.tdb
+DB Statistics: locking.tdb
+ ro_delegations 0
+ ro_revokes 0
+ locks
+ total 14356
+ failed 0
+ current 0
+ pending 0
+ hop_count_buckets: 28087 2 1 0 0 0 0 0 0 0 0 0 0 0 0 0
+ lock_buckets: 0 14188 38 76 32 19 3 0 0 0 0 0 0 0 0 0
+ locks_latency MIN/AVG/MAX 0.001066/0.012686/4.202292 sec out of 14356
+ Num Hot Keys: 1
+ Count:8 Key:ff5bd7cb3ee3822edc1f0000000000000000000000000000
+ </screen>
+ </refsect3>
+ </refsect2>
+
+ <refsect2>
+ <title>getreclock</title>
<para>
- This command is used to show the filename of the reclock file that is used.
+ Show the name of the recovery lock file, if any.
</para>
<para>
Example output:
</para>
- <screen format="linespecific">
-Reclock file:/gpfs/.ctdb/shared
+ <screen>
+ Reclock file:/clusterfs/.ctdb/recovery.lock
</screen>
</refsect2>
- <refsect2><title>setreclock [filename]</title>
+ <refsect2>
+ <title>
+ setreclock <optional><parameter>FILE</parameter></optional>
+ </title>
+
<para>
- This command is used to modify, or clear, the file that is used as the reclock file at runtime. When this command is used, the reclock file checks are disabled. To re-enable the checks the administrator needs to activate the "VerifyRecoveryLock" tunable using "ctdb setvar".
+ FILE specifies the name of the recovery lock file. If the
+ recovery lock file is changed at run-time then this will cause
+ a recovery, which in turn causes the recovery lock to be
+ retaken.
</para>
<para>
- If run with no parameter this will remove the reclock file completely. If run with a parameter the parameter specifies the new filename to use for the recovery lock.
+ If no FILE is specified then a recovery lock file will no
+ longer be used.
</para>
<para>
- This command only affects the runtime settings of a ctdb node and will be lost when ctdb is restarted. For persistent changes to the reclock file setting you must edit /etc/sysconfig/ctdb.
+ This command only affects the run-time setting of a single
+ CTDB node. This setting <emphasis>must</emphasis> be changed
+ on all nodes simultaneously. For information about configuring
+ the recovery lock file please see the
+ <citetitle>CTDB_RECOVERY_LOCK</citetitle> entry in
+ <citerefentry><refentrytitle>ctdbd.conf</refentrytitle>
+ <manvolnum>5</manvolnum></citerefentry> and the
+ <citetitle>--reclock</citetitle> entry in
+ <citerefentry><refentrytitle>ctdbd</refentrytitle>
+ <manvolnum>1</manvolnum></citerefentry>. For information
+ about the recovery lock please see the <citetitle>RECOVERY
+ LOCK</citetitle> section in
+ <citerefentry><refentrytitle>ctdb</refentrytitle>
+ <manvolnum>7</manvolnum></citerefentry>.
</para>
</refsect2>
- <refsect2><title>getdebug</title>
+ <refsect2>
+ <title>getdebug</title>
<para>
- Get the current debug level for the node. the debug level controls what information is written to the log file.
+ Get the current debug level for the node. the debug level controls what information is written to the log file.
</para>
<para>
The debug levels are mapped to the corresponding syslog levels.
The list of debug levels from highest to lowest are :
</para>
<para>
- EMERG ALERT CRIT ERR WARNING NOTICE INFO DEBUG
+ ERR WARNING NOTICE INFO DEBUG
</para>
</refsect2>
- <refsect2><title>setdebug <debuglevel></title>
+ <refsect2>
+ <title>setdebug <parameter>DEBUGLEVEL</parameter></title>
<para>
- Set the debug level of a node. This controls what information will be logged.
+ Set the debug level of a node. This controls what information will be logged.
</para>
<para>
- The debuglevel is one of EMERG ALERT CRIT ERR WARNING NOTICE INFO DEBUG
+ The debuglevel is one of ERR WARNING NOTICE INFO DEBUG
</para>
</refsect2>
- <refsect2><title>getpid</title>
+ <refsect2>
+ <title>getpid</title>
<para>
- This command will return the process id of the ctdb daemon.
+ This command will return the process id of the ctdb daemon.
</para>
</refsect2>
- <refsect2><title>disable</title>
+ <refsect2>
+ <title>disable</title>
<para>
- This command is used to administratively disable a node in the cluster.
- A disabled node will still participate in the cluster and host
- clustered TDB records but its public ip address has been taken over by
- a different node and it no longer hosts any services.
+ This command is used to administratively disable a node in the cluster.
+ A disabled node will still participate in the cluster and host
+ clustered TDB records but its public ip address has been taken over by
+ a different node and it no longer hosts any services.
</para>
</refsect2>
- <refsect2><title>enable</title>
+ <refsect2>
+ <title>enable</title>
<para>
- Re-enable a node that has been administratively disabled.
+ Re-enable a node that has been administratively disabled.
</para>
</refsect2>
- <refsect2><title>stop</title>
+ <refsect2>
+ <title>stop</title>
<para>
- This command is used to administratively STOP a node in the cluster.
- A STOPPED node is connected to the cluster but will not host any
+ This command is used to administratively STOP a node in the cluster.
+ A STOPPED node is connected to the cluster but will not host any
public ip addresse, nor does it participate in the VNNMAP.
The difference between a DISABLED node and a STOPPED node is that
a STOPPED node does not host any parts of the database which means
</para>
</refsect2>
- <refsect2><title>continue</title>
+ <refsect2>
+ <title>continue</title>
<para>
- Re-start a node that has been administratively stopped.
+ Re-start a node that has been administratively stopped.
</para>
</refsect2>
- <refsect2><title>addip <public_ip/mask> <iface></title>
+ <refsect2>
+ <title>addip <parameter>IPADDR</parameter>/<parameter>mask</parameter> <parameter>IFACE</parameter></title>
<para>
This command is used to add a new public ip to a node during runtime.
This allows public addresses to be added to a cluster without having
</para>
<para>
Note that this only updates the runtime instance of ctdb. Any changes will be lost next time ctdb is restarted and the public addresses file is re-read.
- If you want this change to be permanent you must also update the public addresses file manually.
+ If you want this change to be permanent you must also update the public addresses file manually.
</para>
</refsect2>
- <refsect2><title>delip <public_ip></title>
+ <refsect2>
+ <title>delip <parameter>IPADDR</parameter></title>
<para>
This command is used to remove a public ip from a node during runtime.
If this public ip is currently hosted by the node it being removed from, the ip will first be failed over to another node, if possible, before it is removed.
</para>
<para>
Note that this only updates the runtime instance of ctdb. Any changes will be lost next time ctdb is restarted and the public addresses file is re-read.
- If you want this change to be permanent you must also update the public addresses file manually.
+ If you want this change to be permanent you must also update the public addresses file manually.
</para>
</refsect2>
- <refsect2><title>moveip <public_ip> <node></title>
+ <refsect2>
+ <title>moveip <parameter>IPADDR</parameter> <parameter>PNN</parameter></title>
<para>
- This command can be used to manually fail a public ip address to a
- specific node.
+ This command can be used to manually fail a public ip address to a
+ specific node.
</para>
<para>
- In order to manually override the "automatic" distribution of public
- ip addresses that ctdb normally provides, this command only works
- when you have changed the tunables for the daemon to:
+ In order to manually override the "automatic" distribution of public
+ ip addresses that ctdb normally provides, this command only works
+ when you have changed the tunables for the daemon to:
</para>
<para>
- DeterministicIPs = 0
+ DeterministicIPs = 0
</para>
<para>
- NoIPFailback = 1
+ NoIPFailback = 1
</para>
</refsect2>
- <refsect2><title>shutdown</title>
+ <refsect2>
+ <title>shutdown</title>
<para>
- This command will shutdown a specific CTDB daemon.
+ This command will shutdown a specific CTDB daemon.
</para>
</refsect2>
- <refsect2><title>recover</title>
- <para>
- This command will trigger the recovery daemon to do a cluster
- recovery.
- </para>
- </refsect2>
-
- <refsect2><title>ipreallocate</title>
- <para>
- This command will force the recovery master to perform a full ip reallocation process and redistribute all ip addresses. This is useful to "reset" the allocations back to its default state if they have been changed using the "moveip" command. While a "recover" will also perform this reallocation, a recovery is much more hevyweight since it will also rebuild all the databases.
- </para>
- </refsect2>
-
- <refsect2><title>setlmasterrole <on|off></title>
+ <refsect2>
+ <title>setlmasterrole on|off</title>
<para>
This command is used ot enable/disable the LMASTER capability for a node at runtime. This capability determines whether or not a node can be used as an LMASTER for records in the database. A node that does not have the LMASTER capability will not show up in the vnnmap.
</para>
</para>
</refsect2>
- <refsect2><title>setrecmasterrole <on|off></title>
+ <refsect2>
+ <title>setrecmasterrole on|off</title>
<para>
This command is used ot enable/disable the RECMASTER capability for a node at runtime. This capability determines whether or not a node can be used as an RECMASTER for the cluster. A node that does not have the RECMASTER capability can not win a recmaster election. A node that already is the recmaster for the cluster when the capability is stripped off the node will remain the recmaster until the next cluster election.
</para>
</para>
</refsect2>
- <refsect2><title>killtcp <srcip:port> <dstip:port></title>
+ <refsect2>
+ <title>reloadnodes</title>
<para>
- This command will kill the specified TCP connection by issuing a
- TCP RST to the srcip:port endpoint. This is a command used by the
- ctdb eventscripts.
+ This command is used when adding new nodes, or removing
+ existing nodes from an existing cluster.
</para>
- </refsect2>
-
- <refsect2><title>gratiousarp <ip> <interface></title>
<para>
- This command will send out a gratious arp for the specified interface
- through the specified interface. This command is mainly used by the
- ctdb eventscripts.
+ Procedure to add nodes:
</para>
- </refsect2>
-
- <refsect2><title>reloadnodes</title>
+ <orderedlist>
+ <listitem>
+ <para>
+ To expand an existing cluster, first ensure with
+ <command>ctdb status</command> that all nodes are up and
+ running and that they are all healthy. Do not try to
+ expand a cluster unless it is completely healthy!
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ On all nodes, edit <filename>/usr/local/etc/ctdb/nodes</filename>
+ and <emphasis>add the new nodes at the end of this
+ file</emphasis>.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Verify that all the nodes have identical
+ <filename>/usr/local/etc/ctdb/nodes</filename> files after adding
+ the new nodes.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Run <command>ctdb reloadnodes</command> to force all nodes
+ to reload the nodes file.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Use <command>ctdb status</command> on all nodes and verify
+ that they now show the additional nodes.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Install and configure the new node and bring it online.
+ </para>
+ </listitem>
+ </orderedlist>
<para>
- This command is used when adding new nodes, or removing existing nodes from an existing cluster.
+ Procedure to remove nodes:
</para>
+ <orderedlist>
+ <listitem>
+ <para>
+ To remove nodes from an existing cluster, first ensure
+ with <command>ctdb status</command> that all nodes, except
+ the node to be deleted, are up and running and that they
+ are all healthy. Do not try to remove nodes from a
+ cluster unless the cluster is completely healthy!
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Shutdown and power off the node to be removed.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ On all other nodes, edit the
+ <filename>/usr/local/etc/ctdb/nodes</filename> file and
+ <emphasis>comment out</emphasis> the nodes to be removed.
+ <emphasis>Do not delete the lines for the deleted
+ nodes</emphasis>, just comment them out by adding a '#' at
+ the beginning of the lines.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Run <command>ctdb reloadnodes</command> to force all nodes
+ to reload the nodes file.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Use <command>ctdb status</command> on all nodes and verify
+ that the deleted nodes are no longer listed.
+ </para>
+ </listitem>
+ </orderedlist>
+
+ </refsect2>
+
+ <refsect2>
+ <title>
+ reloadips
+ <optional><parameter>PNN-LIST</parameter></optional>
+ </title>
<para>
- Procedure to add a node:
+ This command reloads the public addresses configuration file
+ on the specified nodes. When it completes addresses will be
+ reconfigured and reassigned across the cluster as necessary.
</para>
+ </refsect2>
+
+ <refsect2>
+ <title>getdbmap</title>
<para>
- 1, To expand an existing cluster, first ensure with 'ctdb status' that
- all nodes are up and running and that they are all healthy.
- Do not try to expand a cluster unless it is completely healthy!
+ This command lists all clustered TDB databases that the CTDB daemon has attached to. Some databases are flagged as PERSISTENT, this means that the database stores data persistently and the data will remain across reboots. One example of such a database is secrets.tdb where information about how the cluster was joined to the domain is stored.
</para>
<para>
- 2, On all nodes, edit /etc/ctdb/nodes and add the new node as the last
- entry to the file. The new node MUST be added to the end of this file!
+ If a PERSISTENT database is not in a healthy state the database is
+ flagged as UNHEALTHY. If there's at least one completely healthy node running in
+ the cluster, it's possible that the content is restored by a recovery
+ run automaticly. Otherwise an administrator needs to analyze the
+ problem.
</para>
<para>
- 3, Verify that all the nodes have identical /etc/ctdb/nodes files after you edited them and added the new node!
+ See also "ctdb getdbstatus", "ctdb backupdb", "ctdb restoredb",
+ "ctdb dumpbackup", "ctdb wipedb", "ctdb setvar AllowUnhealthyDBRead 1"
+ and (if samba or tdb-utils are installed) "tdbtool check".
</para>
<para>
- 4, Run 'ctdb reloadnodes' to force all nodes to reload the nodesfile.
+ Most databases are not persistent and only store the state information that the currently running samba daemons need. These databases are always wiped when ctdb/samba starts and when a node is rebooted.
</para>
+
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb getdbmap
+Number of databases:10
+dbid:0x435d3410 name:notify.tdb path:/usr/local/var/lib/ctdb/notify.tdb.0
+dbid:0x42fe72c5 name:locking.tdb path:/usr/local/var/lib/ctdb/locking.tdb.0
+dbid:0x1421fb78 name:brlock.tdb path:/usr/local/var/lib/ctdb/brlock.tdb.0
+dbid:0x17055d90 name:connections.tdb path:/usr/local/var/lib/ctdb/connections.tdb.0
+dbid:0xc0bdde6a name:sessionid.tdb path:/usr/local/var/lib/ctdb/sessionid.tdb.0
+dbid:0x122224da name:test.tdb path:/usr/local/var/lib/ctdb/test.tdb.0
+dbid:0x2672a57f name:idmap2.tdb path:/usr/local/var/lib/ctdb/persistent/idmap2.tdb.0 PERSISTENT
+dbid:0xb775fff6 name:secrets.tdb path:/usr/local/var/lib/ctdb/persistent/secrets.tdb.0 PERSISTENT
+dbid:0xe98e08b6 name:group_mapping.tdb path:/usr/local/var/lib/ctdb/persistent/group_mapping.tdb.0 PERSISTENT
+dbid:0x7bbbd26c name:passdb.tdb path:/usr/local/var/lib/ctdb/persistent/passdb.tdb.0 PERSISTENT
+
+# ctdb getdbmap # example for unhealthy database
+Number of databases:1
+dbid:0xb775fff6 name:secrets.tdb path:/usr/local/var/lib/ctdb/persistent/secrets.tdb.0 PERSISTENT UNHEALTHY
+
+# ctdb -X getdbmap
+|ID|Name|Path|Persistent|Unhealthy|
+|0x7bbbd26c|passdb.tdb|/usr/local/var/lib/ctdb/persistent/passdb.tdb.0|1|0|
+ </screen>
+ </refsect3>
+ </refsect2>
+
+ <refsect2>
+ <title>
+ backupdb
+ <parameter>DB</parameter>
+ <parameter>FILE</parameter>
+ </title>
<para>
- 5, Use 'ctdb status' on all nodes and verify that they now show the additional node.
+ Copy the contents of database DB to FILE. FILE can later be
+ read back using <command>restoredb</command>. This is mainly
+ useful for backing up persistent databases such as
+ <filename>secrets.tdb</filename> and similar.
</para>
+ </refsect2>
+
+ <refsect2>
+ <title>
+ restoredb
+ <parameter>FILE</parameter>
+ <optional><parameter>DB</parameter></optional>
+ </title>
<para>
- 6, Install and configure the new node and bring it online.
+ This command restores a persistent database that was
+ previously backed up using backupdb. By default the data will
+ be restored back into the same database as it was created
+ from. By specifying dbname you can restore the data into a
+ different database.
</para>
+ </refsect2>
+
+ <refsect2>
+ <title>setdbreadonly <parameter>DB</parameter></title>
<para>
- Procedure to remove a node:
+ This command will enable the read-only record support for a
+ database. This is an experimental feature to improve
+ performance for contended records primarily in locking.tdb and
+ brlock.tdb. When enabling this feature you must set it on all
+ nodes in the cluster.
</para>
+ </refsect2>
+
+ <refsect2>
+ <title>setdbsticky <parameter>DB</parameter></title>
<para>
- 1, To remove a node from an existing cluster, first ensure with 'ctdb status' that
- all nodes, except the node to be deleted, are up and running and that they are all healthy.
- Do not try to remove a node from a cluster unless the cluster is completely healthy!
+ This command will enable the sticky record support for the
+ specified database. This is an experimental feature to
+ improve performance for contended records primarily in
+ locking.tdb and brlock.tdb. When enabling this feature you
+ must set it on all nodes in the cluster.
</para>
+ </refsect2>
+
+ </refsect1>
+
+ <refsect1>
+ <title>INTERNAL COMMANDS</title>
+
+ <para>
+ Internal commands are used by CTDB's scripts and are not
+ required for managing a CTDB cluster. Their parameters and
+ behaviour are subject to change.
+ </para>
+
+ <refsect2>
+ <title>gettickles <parameter>IPADDR</parameter></title>
<para>
- 2, Shutdown and poerwoff the node to be removed.
+ Show TCP connections that are registered with CTDB to be
+ "tickled" if there is a failover.
</para>
+ </refsect2>
+
+ <refsect2>
+ <title>gratiousarp <parameter>IPADDR</parameter> <parameter>INTERFACE</parameter></title>
<para>
- 3, On all other nodes, edit the /etc/ctdb/nodes file and comment out the node to be removed. Do not delete the line for that node, just comment it out by adding a '#' at the beginning of the line.
+ Send out a gratious ARP for the specified interface through
+ the specified interface. This command is mainly used by the
+ ctdb eventscripts.
</para>
+ </refsect2>
+
+ <refsect2>
+ <title>killtcp</title>
<para>
- 4, Run 'ctdb reloadnodes' to force all nodes to reload the nodesfile.
+ Read a list of TCP connections, one per line, from standard
+ input and terminate each connection. A connection is
+ specified as:
</para>
+ <synopsis>
+ <parameter>SRC-IPADDR</parameter>:<parameter>SRC-PORT</parameter> <parameter>DST-IPADDR</parameter>:<parameter>DST-PORT</parameter>
+ </synopsis>
<para>
- 5, Use 'ctdb status' on all nodes and verify that the deleted node no longer shows up in the list..
+ Each connection is terminated by issuing a TCP RST to the
+ SRC-IPADDR:SRC-PORT endpoint.
</para>
<para>
+ A single connection can be specified on the command-line
+ rather than on standard input.
</para>
-
</refsect2>
- <refsect2><title>tickle <srcip:port> <dstip:port></title>
- <para>
- This command will will send a TCP tickle to the source host for the
- specified TCP connection.
- A TCP tickle is a TCP ACK packet with an invalid sequence and
- acknowledge number and will when received by the source host result
- in it sending an immediate correct ACK back to the other end.
- </para>
+ <refsect2>
+ <title>
+ pdelete <parameter>DB</parameter> <parameter>KEY</parameter>
+ </title>
<para>
- TCP tickles are useful to "tickle" clients after a IP failover has
- occured since this will make the client immediately recognize the
- TCP connection has been disrupted and that the client will need
- to reestablish. This greatly speeds up the time it takes for a client
- to detect and reestablish after an IP failover in the ctdb cluster.
+ Delete KEY from DB.
</para>
</refsect2>
- <refsect2><title>gettickles <ip></title>
+ <refsect2>
+ <title>
+ pfetch <parameter>DB</parameter> <parameter>KEY</parameter>
+ </title>
<para>
- This command is used to show which TCP connections are registered with
- CTDB to be "tickled" if there is a failover.
+ Print the value associated with KEY in DB.
</para>
</refsect2>
- <refsect2><title>repack [max_freelist]</title>
+
+ <refsect2>
+ <title>
+ pstore
+ <parameter>DB</parameter>
+ <parameter>KEY</parameter>
+ <parameter>FILE</parameter>
+ </title>
<para>
- Over time, when records are created and deleted in a TDB, the TDB list of free space will become fragmented. This can lead to a slowdown in accessing TDB records.
- This command is used to defragment a TDB database and pruning the freelist.
+ Store KEY in DB with contents of FILE as the associated value.
</para>
-
- <para>
- If [max_freelist] is specified, then a database will only be repacked if it has more than this number of entries in the freelist.
- </para>
+ </refsect2>
+
+ <refsect2>
+ <title>
+ ptrans
+ <parameter>DB</parameter>
+ <optional><parameter>FILE</parameter></optional>
+ </title>
<para>
- During repacking of the database, the entire TDB database will be locked to prevent writes. If samba tries to write to a record in the database during a repack operation, samba will block until the repacking has completed.
+ Read a list of key-value pairs, one per line from FILE, and
+ store them in DB using a single transaction. An empty value
+ is equivalent to deleting the given key.
</para>
-
<para>
- This command can be disruptive and can cause samba to block for the duration of the repack operation. In general, a repack operation will take less than one second to complete.
+ The key and value should be separated by spaces or tabs. Each
+ key/value should be a printable string enclosed in
+ double-quotes.
</para>
-
- <para>
- A repack operation will only defragment the local TDB copy of the CTDB database. You need to run this command on all of the nodes to repack a CTDB database completely.
- </para>
+ </refsect2>
+ <refsect2>
+ <title>runstate [setup|first_recovery|startup|running]</title>
<para>
- Example: ctdb repack 1000
+ Print the runstate of the specified node. Runstates are used
+ to serialise important state transitions in CTDB, particularly
+ during startup.
</para>
-
<para>
- By default, this operation is issued from the 00.ctdb event script every 5 minutes.
+ If one or more optional runstate arguments are specified then
+ the node must be in one of these runstates for the command to
+ succeed.
</para>
-
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb runstate
+RUNNING
+ </screen>
+ </refsect3>
</refsect2>
- <refsect2><title>vacuum [max_records]</title>
+ <refsect2>
+ <title>setifacelink <parameter>IFACE</parameter> up|down</title>
<para>
- Over time CTDB databases will fill up with empty deleted records which will lead to a progressive slow down of CTDB database access.
- This command is used to prune all databases and delete all empty records from the cluster.
+ Set the internal state of network interface IFACE. This is
+ typically used in the <filename>10.interface</filename> script
+ in the "monitor" event.
</para>
-
<para>
- By default, vacuum will delete all empty records from all databases.
- If [max_records] is specified, the command will only delete the first
- [max_records] empty records for each database.
- </para>
-
- <para>
- Vacuum only deletes records where the local node is the lmaster.
- To delete all records from the entire cluster you need to run a vacuum from each node.
-
- This command is not disruptive. Samba is unaffected and will still be able to read/write records normally while the database is being vacuumed.
+ Example: ctdb setifacelink eth0 up
</para>
+ </refsect2>
+ <refsect2>
+ <title>tickle <parameter>SRC-IPADDR</parameter>:<parameter>SRC-PORT</parameter> <parameter>DST-IPADDR</parameter>:<parameter>DST-PORT</parameter></title>
<para>
- Example: ctdb vacuum
+ Send a TCP tickle to the source host for the specified TCP
+ connection. A TCP tickle is a TCP ACK packet with an invalid
+ sequence and acknowledge number and will when received by the
+ source host result in it sending an immediate correct ACK back
+ to the other end.
</para>
-
<para>
- By default, this operation is issued from the 00.ctdb event script every 5 minutes.
+ TCP tickles are useful to "tickle" clients after a IP failover has
+ occured since this will make the client immediately recognize the
+ TCP connection has been disrupted and that the client will need
+ to reestablish. This greatly speeds up the time it takes for a client
+ to detect and reestablish after an IP failover in the ctdb cluster.
</para>
</refsect2>
- <refsect2><title>backupdb <database> <file></title>
+ <refsect2>
+ <title>version</title>
<para>
- This command can be used to copy the entire content of a database out to a file. This file can later be read back into ctdb using the restoredb command.
-This is mainly useful for backing up persistent databases such as secrets.tdb and similar.
+ Display the CTDB version.
</para>
</refsect2>
- <refsect2><title>restoredb <file></title>
+ </refsect1>
+
+ <refsect1>
+ <title>DEBUGGING COMMANDS</title>
+ <para>
+ These commands are primarily used for CTDB development and testing and
+ should not be used for normal administration.
+ </para>
+
+
+ <refsect2>
+ <title>OPTIONS</title>
+
+ <variablelist>
+ <varlistentry><term>--print-emptyrecords</term>
+ <listitem>
+ <para>
+ This enables printing of empty records when dumping databases
+ with the catdb, cattbd and dumpdbbackup commands. Records with
+ empty data segment are considered deleted by ctdb and cleaned
+ by the vacuuming mechanism, so this switch can come in handy for
+ debugging the vacuuming behaviour.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>--print-datasize</term>
+ <listitem>
+ <para>
+ This lets database dumps (catdb, cattdb, dumpdbbackup) print the
+ size of the record data instead of dumping the data contents.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>--print-lmaster</term>
+ <listitem>
+ <para>
+ This lets catdb print the lmaster for each record.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>--print-hash</term>
+ <listitem>
+ <para>
+ This lets database dumps (catdb, cattdb, dumpdbbackup) print the
+ hash for each record.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>--print-recordflags</term>
+ <listitem>
+ <para>
+ This lets catdb and dumpdbbackup print the
+ record flags for each record. Note that cattdb always
+ prints the flags.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ </variablelist>
+ </refsect2>
+
+ <refsect2>
+ <title>process-exists <parameter>PID</parameter></title>
<para>
- This command restores a persistent database that was previously backed up using backupdb.
+ This command checks if a specific process exists on the CTDB host. This is mainly used by Samba to check if remote instances of samba are still running or not.
</para>
</refsect2>
- <refsect2><title>wipedb <dbname></title>
+ <refsect2>
+ <title>getdbstatus <parameter>DB</parameter></title>
+ <para>
+ This command displays more details about a database.
+ </para>
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb getdbstatus test.tdb.0
+dbid: 0x122224da
+name: test.tdb
+path: /usr/local/var/lib/ctdb/test.tdb.0
+PERSISTENT: no
+HEALTH: OK
+
+# ctdb getdbstatus registry.tdb # with a corrupted TDB
+dbid: 0xf2a58948
+name: registry.tdb
+path: /usr/local/var/lib/ctdb/persistent/registry.tdb.0
+PERSISTENT: yes
+HEALTH: NO-HEALTHY-NODES - ERROR - Backup of corrupted TDB in '/usr/local/var/lib/ctdb/persistent/registry.tdb.0.corrupted.20091208091949.0Z'
+ </screen>
+ </refsect3>
+ </refsect2>
+
+ <refsect2>
+ <title>catdb <parameter>DB</parameter></title>
<para>
- This command can be used to remove all content of a database.
+ Print a dump of the clustered TDB database DB.
</para>
</refsect2>
- </refsect1>
-
- <refsect1><title>Debugging Commands</title>
- <para>
- These commands are primarily used for CTDB development and testing and
- should not be used for normal administration.
- </para>
- <refsect2><title>process-exists <pid></title>
+ <refsect2>
+ <title>cattdb <parameter>DB</parameter></title>
<para>
- This command checks if a specific process exists on the CTDB host. This is mainly used by Samba to check if remote instances of samba are still running or not.
+ Print a dump of the contents of the local TDB database DB.
</para>
</refsect2>
- <refsect2><title>getdbmap</title>
+ <refsect2>
+ <title>dumpdbbackup <parameter>FILE</parameter></title>
<para>
- This command lists all clustered TDB databases that the CTDB daemon has attached to. Some databases are flagged as PERSISTENT, this means that the database stores data persistently and the data will remain across reboots. One example of such a database is secrets.tdb where information about how the cluster was joined to the domain is stored.
- </para>
- <para>
- Most databases are not persistent and only store the state information that the currently running samba daemons need. These databases are always wiped when ctdb/samba starts and when a node is rebooted.
+ Print a dump of the contents from database backup FILE,
+ similar to <command>catdb</command>.
</para>
+ </refsect2>
+
+ <refsect2>
+ <title>wipedb <parameter>DB</parameter></title>
<para>
- Example: ctdb getdbmap
+ Remove all contents of database DB.
</para>
+ </refsect2>
+
+ <refsect2>
+ <title>recover</title>
<para>
- Example output:
+ This command will trigger the recovery daemon to do a cluster
+ recovery.
</para>
- <screen format="linespecific">
-Number of databases:10
-dbid:0x435d3410 name:notify.tdb path:/var/ctdb/notify.tdb.0
-dbid:0x42fe72c5 name:locking.tdb path:/var/ctdb/locking.tdb.0 dbid:0x1421fb78 name:brlock.tdb path:/var/ctdb/brlock.tdb.0
-dbid:0x17055d90 name:connections.tdb path:/var/ctdb/connections.tdb.0
-dbid:0xc0bdde6a name:sessionid.tdb path:/var/ctdb/sessionid.tdb.0
-dbid:0x122224da name:test.tdb path:/var/ctdb/test.tdb.0
-dbid:0x2672a57f name:idmap2.tdb path:/var/ctdb/persistent/idmap2.tdb.0 PERSISTENT
-dbid:0xb775fff6 name:secrets.tdb path:/var/ctdb/persistent/secrets.tdb.0 PERSISTENT
-dbid:0xe98e08b6 name:group_mapping.tdb path:/var/ctdb/persistent/group_mapping.tdb.0 PERSISTENT
-dbid:0x7bbbd26c name:passdb.tdb path:/var/ctdb/persistent/passdb.tdb.0 PERSISTENT
- </screen>
</refsect2>
- <refsect2><title>catdb <dbname></title>
+ <refsect2>
+ <title>ipreallocate, sync</title>
<para>
- This command will dump a clustered TDB database to the screen. This is a debugging command.
+ This command will force the recovery master to perform a full ip reallocation process and redistribute all ip addresses. This is useful to "reset" the allocations back to its default state if they have been changed using the "moveip" command. While a "recover" will also perform this reallocation, a recovery is much more hevyweight since it will also rebuild all the databases.
</para>
</refsect2>
- <refsect2><title>getmonmode</title>
+ <refsect2>
+ <title>getmonmode</title>
<para>
- This command returns the monutoring mode of a node. The monitoring mode is either ACTIVE or DISABLED. Normally a node will continously monitor that all other nodes that are expected are in fact connected and that they respond to commands.
+ This command returns the monutoring mode of a node. The monitoring mode is either ACTIVE or DISABLED. Normally a node will continuously monitor that all other nodes that are expected are in fact connected and that they respond to commands.
</para>
<para>
- ACTIVE - This is the normal mode. The node is actively monitoring all other nodes, both that the transport is connected and also that the node responds to commands. If a node becomes unavailable, it will be marked as DISCONNECTED and a recovery is initiated to restore the cluster.
+ ACTIVE - This is the normal mode. The node is actively monitoring all other nodes, both that the transport is connected and also that the node responds to commands. If a node becomes unavailable, it will be marked as DISCONNECTED and a recovery is initiated to restore the cluster.
</para>
<para>
- DISABLED - This node is not monitoring that other nodes are available. In this mode a node failure will not be detected and no recovery will be performed. This mode is useful when for debugging purposes one wants to attach GDB to a ctdb process but wants to prevent the rest of the cluster from marking this node as DISCONNECTED and do a recovery.
+ DISABLED - This node is not monitoring that other nodes are available. In this mode a node failure will not be detected and no recovery will be performed. This mode is useful when for debugging purposes one wants to attach GDB to a ctdb process but wants to prevent the rest of the cluster from marking this node as DISCONNECTED and do a recovery.
</para>
</refsect2>
- <refsect2><title>setmonmode <0|1></title>
+ <refsect2>
+ <title>setmonmode 0|1</title>
<para>
- This command can be used to explicitely disable/enable monitoring mode on a node. The main purpose is if one wants to attach GDB to a running ctdb daemon but wants to prevent the other nodes from marking it as DISCONNECTED and issuing a recovery. To do this, set monitoring mode to 0 on all nodes before attaching with GDB. Remember to set monitoring mode back to 1 afterwards.
+ This command can be used to explicitly disable/enable monitoring mode on a node. The main purpose is if one wants to attach GDB to a running ctdb daemon but wants to prevent the other nodes from marking it as DISCONNECTED and issuing a recovery. To do this, set monitoring mode to 0 on all nodes before attaching with GDB. Remember to set monitoring mode back to 1 afterwards.
</para>
</refsect2>
- <refsect2><title>attach <dbname></title>
+ <refsect2>
+ <title>attach <parameter>DBNAME</parameter> [persistent]</title>
<para>
- This is a debugging command. This command will make the CTDB daemon create a new CTDB database and attach to it.
+ Create a new CTDB database called DBNAME and attach to it on
+ all nodes.
</para>
</refsect2>
- <refsect2><title>dumpmemory</title>
+ <refsect2>
+ <title>detach <parameter>DB-LIST</parameter></title>
<para>
- This is a debugging command. This command will make the ctdb
- daemon to write a fill memory allocation map to standard output.
+ Detach specified non-persistent database(s) from the cluster. This
+ command will disconnect specified database(s) on all nodes in
+ the cluster. This command should only be used when none of the
+ specified database(s) are in use.
</para>
- </refsect2>
-
- <refsect2><title>rddumpmemory</title>
<para>
- This is a debugging command. This command will dump the talloc memory
- allocation tree for the recovery daemon to standard output.
+ All nodes should be active and tunable AllowClientDBAccess should
+ be disabled on all nodes before detaching databases.
</para>
</refsect2>
- <refsect2><title>freeze</title>
+ <refsect2>
+ <title>dumpmemory</title>
<para>
- This command will lock all the local TDB databases causing clients
- that are accessing these TDBs such as samba3 to block until the
- databases are thawed.
+ This is a debugging command. This command will make the ctdb
+ daemon to write a fill memory allocation map to standard output.
</para>
+ </refsect2>
+
+ <refsect2>
+ <title>rddumpmemory</title>
<para>
- This is primarily used by the recovery daemon to stop all samba
- daemons from accessing any databases while the database is recovered
- and rebuilt.
+ This is a debugging command. This command will dump the talloc memory
+ allocation tree for the recovery daemon to standard output.
</para>
</refsect2>
- <refsect2><title>thaw</title>
+ <refsect2>
+ <title>thaw</title>
<para>
- Thaw a previously frozen node.
+ Thaw a previously frozen node.
</para>
</refsect2>
- <refsect2><title>eventscript <arguments></title>
+ <refsect2>
+ <title>eventscript <parameter>ARGUMENTS</parameter></title>
<para>
- This is a debugging command. This command can be used to manually
+ This is a debugging command. This command can be used to manually
invoke and run the eventscritps with arbitrary arguments.
</para>
</refsect2>
- <refsect2><title>ban <bantime|0></title>
+ <refsect2>
+ <title>ban <parameter>BANTIME</parameter></title>
+ <para>
+ Administratively ban a node for BANTIME seconds. The node
+ will be unbanned after BANTIME seconds have elapsed.
+ </para>
+ <para>
+ A banned node does not participate in the cluster. It does
+ not host any records for the clustered TDB and does not host
+ any public IP addresses.
+ </para>
<para>
- Administratively ban a node for bantime seconds. A bantime of 0 means that the node should be permanently banned.
+ Nodes are automatically banned if they misbehave. For
+ example, a node may be banned if it causes too many cluster
+ recoveries.
</para>
<para>
- A banned node does not participate in the cluster and does not host any records for the clustered TDB. Its ip address has been taken over by an other node and no services are hosted.
+ To administratively exclude a node from a cluster use the
+ <command>stop</command> command.
</para>
+ </refsect2>
+
+ <refsect2>
+ <title>unban</title>
<para>
- Nodes are automatically banned if they are the cause of too many
- cluster recoveries.
+ This command is used to unban a node that has either been
+ administratively banned using the ban command or has been
+ automatically banned.
</para>
</refsect2>
- <refsect2><title>unban</title>
+ <refsect2>
+ <title>
+ rebalancenode
+ <optional><parameter>PNN-LIST</parameter></optional>
+ </title>
<para>
- This command is used to unban a node that has either been
- administratively banned using the ban command or has been automatically
- banned by the recovery daemon.
+ This command marks the given nodes as rebalance targets in the
+ LCP2 IP allocation algorithm. The
+ <command>reloadips</command> command will do this as necessary
+ so this command should not be needed.
</para>
</refsect2>
+ <refsect2>
+ <title>check_srvids <parameter>SRVID</parameter> ...</title>
+ <para>
+ This command checks whether a set of srvid message ports are
+ registered on the node or not. The command takes a list of
+ values to check.
+ </para>
+ <refsect3>
+ <title>Example</title>
+ <screen>
+# ctdb check_srvids 1 2 3 14765
+Server id 0:1 does not exist
+Server id 0:2 does not exist
+Server id 0:3 does not exist
+Server id 0:14765 exists
+ </screen>
+ </refsect3>
+ </refsect2>
</refsect1>
- <refsect1><title>SEE ALSO</title>
+ <!-- UNDOCUMENTED: showban stats disablemonitor enablemonitor
+ isnotrecmaster addtickle deltickle regsrvid unregsrvid chksrvid
+ getsrvids rebalanceip setdbprio getdbprio msglisten msgsend
+ tfetch tstore readkey writekey
+ checktcpport getdbseqnum ipiface
+ -->
+
+ <refsect1>
+ <title>SEE ALSO</title>
<para>
- ctdbd(1), onnode(1)
+ <citerefentry><refentrytitle>ctdbd</refentrytitle>
+ <manvolnum>1</manvolnum></citerefentry>,
+
+ <citerefentry><refentrytitle>onnode</refentrytitle>
+ <manvolnum>1</manvolnum></citerefentry>,
+
+ <citerefentry><refentrytitle>ctdb</refentrytitle>
+ <manvolnum>7</manvolnum></citerefentry>,
+
+ <citerefentry><refentrytitle>ctdb-statistics</refentrytitle>
+ <manvolnum>7</manvolnum></citerefentry>,
+
+ <citerefentry><refentrytitle>ctdb-tunables</refentrytitle>
+ <manvolnum>7</manvolnum></citerefentry>,
+
<ulink url="http://ctdb.samba.org/"/>
</para>
</refsect1>
- <refsect1><title>COPYRIGHT/LICENSE</title>
-<literallayout>
-Copyright (C) Andrew Tridgell 2007
-Copyright (C) Ronnie sahlberg 2007
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 3 of the License, or (at
-your option) any later version.
-
-This program is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, see http://www.gnu.org/licenses/.
-</literallayout>
- </refsect1>
+
+
</refentry>
git.samba.org / ambi / samba-autobuild / .git / blobdiff