Stefan Metzmacher [Thu, 28 Jun 2012 08:00:37 +0000 (10:00 +0200)]
s3:smbd/files: fsp->fnum is uint64_t not int!
metze
Stefan Metzmacher [Thu, 28 Jun 2012 07:54:41 +0000 (09:54 +0200)]
s3:brlock: s/int/uint64_t for fnum
fsp->fnum and lock->fnum are uint64_t already and we should not truncate the value here.
Currently this doesn't matter as we only use 16-bit.
But as 'int' is int32_t and we later compare fnum with lock->fnum == fnum,
the cast from int32_t to uint64_t goes via int64_t instead of uint32_t.
This means even if fsp->fnum just uses 32-bit of the uint64_t
we'll get the wrong result, as the implicit cast from a negative int32_t
value to uint64_t adds 0xFFFFFFFF00000000.
metze
Stefan Metzmacher [Thu, 28 Jun 2012 07:54:14 +0000 (09:54 +0200)]
s3:brlock: add some const to print_lock_struct()
metze
Stefan Metzmacher [Wed, 27 Jun 2012 22:51:45 +0000 (00:51 +0200)]
s3:wscript: use LOCKING subsystem for smbtorture3
metze
Rusty Russell [Thu, 28 Jun 2012 01:34:25 +0000 (11:04 +0930)]
source4/smbd/pidfile: don't panic if pid file is corrupt.
In particular, on a virtual machine after a forced reboot, it
contained "Ille" instead of a valid PID. Given it was the right
length, I'm assuming it was filesystem corruption.
process_exists_by_pid() then panics, when given a pid < 1.
Reported-by: lostogre on #samba-technical
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User(master): Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date(master): Thu Jun 28 05:19:24 CEST 2012 on sn-devel-104
Björn Jacke [Wed, 27 Jun 2012 17:23:15 +0000 (19:23 +0200)]
replace: define INT64_MAX when not defined
Tru64 doesn't have any stdint.h
Autobuild-User(master): Björn Jacke <bj@sernet.de>
Autobuild-Date(master): Thu Jun 28 00:45:58 CEST 2012 on sn-devel-104
Andrew Bartlett [Wed, 27 Jun 2012 13:24:39 +0000 (23:24 +1000)]
s3-param: Rename loadparm_s3_context -> loadparm_s3_helpers
This helps clarify the role of this structure and wrapper function.
The purpose here is to provide helper functions to the lib/param
loadparm_context that point back at the s3 lp_ functions. This allows
a struct loadparm_context to be passed to any point in the code, and
always refer to the correct loadparm system. If this has not been
set, the variables loaded in the lib/param code will be returned.
As requested by Michael Adam.
Andrew Bartlett
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Jun 27 17:11:16 CEST 2012 on sn-devel-104
Andrew Bartlett [Wed, 27 Jun 2012 09:23:05 +0000 (19:23 +1000)]
s3-pdb_samba4: Remove dupliate profilePath handling
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Jun 27 13:16:26 CEST 2012 on sn-devel-104
Andrew Bartlett [Tue, 26 Jun 2012 10:59:25 +0000 (20:59 +1000)]
s4-selftest: expand passdb testing
This tests pdb_samba4 in the first instance
Andrew Bartlett [Wed, 27 Jun 2012 04:36:31 +0000 (14:36 +1000)]
s3-pdbtest: Initialise more elements for testing
If these were left as defaults, they cause issues when the backend (pdb_samba4)
returns the internal defaults from the directory, not the defaults from samu_new()
Andrew Bartlett
Andrew Bartlett [Wed, 27 Jun 2012 04:34:47 +0000 (14:34 +1000)]
s3-pdb_samba4: Add support for lastLogon and lastLogoff
Andrew Bartlett [Wed, 27 Jun 2012 04:56:04 +0000 (14:56 +1000)]
s3-pdb_samba4: Fix time handling, use nt_time_to_unix()
This matches
478d74fe1447c4588b14ef7040c8c13339d54026 which I failed to
merge from pdb_ads.
Andrew Bartlett
Andrew Bartlett [Wed, 27 Jun 2012 04:33:42 +0000 (14:33 +1000)]
lib/ldb: Print trace messages for modify correctly
Andrew Bartlett [Wed, 27 Jun 2012 02:47:59 +0000 (12:47 +1000)]
s4-selftest: Test login with a password expired user
This uses rkpty to test changing an expired password.
Andrew Bartlett
Andrew Bartlett [Wed, 27 Jun 2012 02:45:37 +0000 (12:45 +1000)]
s4-dsdb when setting DSDB_CONTROL_PASSWORD_BYPASS_LAST_SET_OID make it non-critical
Andrew Bartlett [Wed, 27 Jun 2012 02:42:31 +0000 (12:42 +1000)]
s4-dsdb: Remove hooks for non-directory password handling
This was an interesting hack, and the local_password module still exists, but
until it has a use case and a test case, remove the bypass of password_hash.
Andrew Bartlett
Andrew Bartlett [Wed, 27 Jun 2012 02:40:59 +0000 (12:40 +1000)]
selftest: allow NSS_WRAPPER_* vars to be exported to the environment
Andrew Bartlett [Wed, 27 Jun 2012 07:51:55 +0000 (17:51 +1000)]
selftest: Add extra users to nss_wrapper
These will be used for a test using pdbtest and to run the client
test environment under nss_wrapper.
Andrew Bartlett
Andrew Bartlett [Tue, 26 Jun 2012 23:04:46 +0000 (09:04 +1000)]
s3-pdbtest: show mis-matching times
Michael Adam [Wed, 27 Jun 2012 06:20:59 +0000 (08:20 +0200)]
s3:registry: change reg_import.c according to coding guidelines.
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Wed Jun 27 10:07:54 CEST 2012 on sn-devel-104
Michael Adam [Wed, 27 Jun 2012 06:20:31 +0000 (08:20 +0200)]
s3:registry: use TALLOC_CTX * instead of const void * in reg_import_adapter()
Gregor Beck [Thu, 7 Jun 2012 11:34:35 +0000 (13:34 +0200)]
s3: add a tool "cclean" to cleanup orphaned entries from connections.tdb
Signed-off-by: Michael Adam <obnox@samba.org>
Gregor Beck [Thu, 7 Jun 2012 11:25:17 +0000 (13:25 +0200)]
s3:conn_tdb: add a function connections_fetch_entry_ext() that also takes the cnum
and have connections_fetch_entry() call connections_fetch_entry_ext().
Signed-off-by: Michael Adam <obnox@samba.org>
Gregor Beck [Tue, 12 Jun 2012 08:10:36 +0000 (10:10 +0200)]
s3:lib:dbwrap: fix return value of db_ctdb_traverse[_read] for non-persistent dbs
to return the number of traversed records upon successful traverse.
Signed-off-by: Michael Adam <obnox@samba.org>
David Disseldorp [Tue, 26 Jun 2012 23:23:57 +0000 (01:23 +0200)]
s3-printing: fix broken print_job_get_name() return
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Wed Jun 27 04:04:56 CEST 2012 on sn-devel-104
Björn Jacke [Tue, 26 Jun 2012 22:25:53 +0000 (00:25 +0200)]
s3:test_net_registry_check.sh: grep -E isn't portable, use egrep
grep -E doesn't work on Solaris /usr/bin/grep e.g.
Autobuild-User(master): Björn Jacke <bj@sernet.de>
Autobuild-Date(master): Wed Jun 27 02:18:07 CEST 2012 on sn-devel-104
Björn Jacke [Tue, 26 Jun 2012 10:23:41 +0000 (12:23 +0200)]
tests: make test_ldb portable, eliminate "local" keyword
this is BASH only, don't use it.
Michael Adam [Tue, 26 Jun 2012 13:35:32 +0000 (15:35 +0200)]
s3:net registry import: implement dry-run with "--test"
Pair-Programmed-With: Gregor Beck <gbeck@sernet.de>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Tue Jun 26 21:43:49 CEST 2012 on sn-devel-104
Michael Adam [Tue, 26 Jun 2012 13:13:28 +0000 (15:13 +0200)]
s3:net registry import: add an assert
Pair-Programmed-With: Gergor Beck <gbeck@sernet.de>
Michael Adam [Tue, 26 Jun 2012 13:12:28 +0000 (15:12 +0200)]
s3:net registry import: reduce indentation
Pair-Programmed-With: Gregor Beck <gbeck@sernet.de>
Michael Adam [Tue, 26 Jun 2012 13:11:22 +0000 (15:11 +0200)]
s3:net registry import: fix the return code when transaction commit fails
Pair-Programmed-With: Gregor Beck <gbeck@sernet.de>
Michael Adam [Tue, 26 Jun 2012 13:02:41 +0000 (15:02 +0200)]
s3:net registry import: improve regdb_open/close layering
Pair-Programmed-With: Gregor Beck <gbeck@sernet.de>
Michael Adam [Tue, 26 Jun 2012 11:37:46 +0000 (13:37 +0200)]
s3:net registry import: untangle nested function calls
Michael Adam [Tue, 26 Jun 2012 11:32:40 +0000 (13:32 +0200)]
s3:net registry import: reduce indentation and untangle assignment from check
in import_with_precheck_action().
Michael Adam [Tue, 26 Jun 2012 11:29:50 +0000 (13:29 +0200)]
s3:net registry import: move precheck-and-import code to its own function
This is the code that is executed in a registry transaction.
The purpose of the refactoring is to be able to simplify and
untangle the code structure in the sequel.
Gregor Beck [Wed, 13 Jun 2012 12:32:55 +0000 (14:32 +0200)]
s3:net registry: fix violation of coding conventions
Signed-off-by: Michael Adam <obnox@samba.org>
Gregor Beck [Fri, 4 May 2012 11:51:01 +0000 (13:51 +0200)]
s3:net registry import: add option --precheck
Signed-off-by: Michael Adam <obnox@samba.org>
Gregor Beck [Mon, 7 May 2012 13:43:27 +0000 (15:43 +0200)]
s3:registry: add function registry_value_cmp()
Signed-off-by: Michael Adam <obnox@samba.org>
Gregor Beck [Fri, 4 May 2012 07:35:37 +0000 (09:35 +0200)]
s3:net registry import: check return values + codecleanup
Signed-off-by: Michael Adam <obnox@samba.org>
Gregor Beck [Mon, 7 May 2012 13:48:16 +0000 (15:48 +0200)]
s3:net registry: fix output of dwords with sign bit set
Signed-off-by: Michael Adam <obnox@samba.org>
Gregor Beck [Mon, 7 May 2012 13:44:21 +0000 (15:44 +0200)]
s3:registry: fix possible double free in import
Signed-off-by: Michael Adam <obnox@samba.org>
Gregor Beck [Mon, 7 May 2012 13:46:41 +0000 (15:46 +0200)]
s3:registry: improve debug output in reg_parse
Signed-off-by: Michael Adam <obnox@samba.org>
Gregor Beck [Mon, 30 Apr 2012 08:27:56 +0000 (10:27 +0200)]
s3:registry: add functions to conveniently create registry_values
Pair-Programmed-With: Michael Adam <obnox@samba.org>
Gregor Beck [Wed, 2 May 2012 09:22:54 +0000 (11:22 +0200)]
s3:registry: silence net_deletekey_recursive
WERR_BADFILE may not be an error for the caller because the result is the same.
Signed-off-by: Michael Adam <obnox@samba.org>
Michael Adam [Fri, 4 May 2012 15:57:51 +0000 (17:57 +0200)]
s3:registry: make reg_delete_path() delete the path recursively.
Pair-Programmed-With: Gregor Beck <gbeck@sernet.de>
(cherry picked from commit
a56992ab71032b54d9879834c12f6b88e6174cb4)
Gregor Beck [Mon, 30 Apr 2012 08:26:32 +0000 (10:26 +0200)]
s3:registry: compile reg_create_path() & reg_delete_path()
Signed-off-by: Michael Adam <obnox@samba.org>
Björn Jacke [Tue, 26 Jun 2012 09:33:36 +0000 (11:33 +0200)]
Merge suggested fix from bug 7511 and enhance it
Changes from Lars Müller and Olaf Flebbe:
a) The location in the filesystem defaults to STATEDIR/usershare
b) If undefined the default location is used; if set to zero (the
default) user defined shares are ignored.
Autobuild-User(master): Björn Jacke <bj@sernet.de>
Autobuild-Date(master): Tue Jun 26 19:55:00 CEST 2012 on sn-devel-104
Björn Jacke [Mon, 25 Jun 2012 19:21:31 +0000 (21:21 +0200)]
s3:test_registry_upgrade: make more portable and eliminate "local" keyword
prefer to use function syntax with (...) to make variables local
David Disseldorp [Fri, 22 Jun 2012 16:49:50 +0000 (18:49 +0200)]
s3-torture: Use static printer for smbd spooler test
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Tue Jun 26 18:04:43 CEST 2012 on sn-devel-104
David Disseldorp [Thu, 21 Jun 2012 13:49:55 +0000 (15:49 +0200)]
s3-printing: use euid for vlp job tracking
vlp can be called by print_run_command as root with euids set
appropriately, vlp should use this to track the job owner.
David Disseldorp [Thu, 9 Feb 2012 11:08:27 +0000 (12:08 +0100)]
s3-printing: fill print_generic sysjob id on job submission
Change the generic print backend to fill the printing backend job
identifier (sysjob) on submission of a new job.
This is needed to ensure correct mapping of spoolss jobs and entries in
the backend print queue.
This and the last 13 commits attempt to address bug 8719.
David Disseldorp [Wed, 8 Feb 2012 17:47:11 +0000 (18:47 +0100)]
s3-printing: pass lpq command to job_submit
Currently the generic print backend does not fill the printing backend
job identifier (sysjob) on submission of a new job. The sysjob
identifier is required to correctly map jobs in the printer queue to
corresponding spoolss print jobs.
Passing the lpq command to job_submit allows the generic print backend
to check the printer queue for the new job following submission. This
behaviour will come in a later commit.
David Disseldorp [Wed, 8 Feb 2012 16:03:06 +0000 (17:03 +0100)]
s3-printing: remove unused print_job_fname()
David Disseldorp [Wed, 8 Feb 2012 16:57:02 +0000 (17:57 +0100)]
s3-printing: pass a talloc ctx to unpack_pjob
Rather than allocating the devicemode on a null context.
David Disseldorp [Wed, 8 Feb 2012 15:55:40 +0000 (16:55 +0100)]
s3-printing: return talloced print jobs
print_job_find() currently returns print jobs to callers via a
statically allocated variable, this is particularly messy as the
device mode is talloced under the static variable.
This change adds or passes a talloc context to all callers, giving them
ownership of the returned print job.
David Disseldorp [Wed, 8 Feb 2012 14:01:15 +0000 (15:01 +0100)]
s3-printing: clean up print_job_pause/resume interface
Currently both return a bool and sometimes set a werr pointer argument,
always return werror instead.
David Disseldorp [Wed, 8 Feb 2012 12:45:40 +0000 (13:45 +0100)]
s3-printing: fix potential print db refcount leak
David Disseldorp [Wed, 1 Feb 2012 12:21:04 +0000 (13:21 +0100)]
s3-spoolss: remove duplicate "." in smbd spooler path
David Disseldorp [Mon, 30 Jan 2012 16:35:28 +0000 (17:35 +0100)]
s3-printing: remove print_parse_jobid()
With all callers fixed, it is now safe to remove.
David Disseldorp [Mon, 30 Jan 2012 15:05:21 +0000 (16:05 +0100)]
s3-printing: remove redundant variable set
David Disseldorp [Mon, 30 Jan 2012 12:35:21 +0000 (13:35 +0100)]
s3-printing: remove print_parse_jobid() calls from printing.c
In all cases the spoolss layer job id can be determinded from the
printing subsystem allocated job identifier (sysjob).
David Disseldorp [Fri, 27 Jan 2012 11:33:27 +0000 (12:33 +0100)]
s3-printing: rename queue->job sysjob
Print jobs maintain two job identifiers, the jobid allocated by the
spoolss layer (pj->jobid), and the job identifier defined by the
printing backend (pj->sysjob).
Printer job queues currently only contain a single job identifier
variable (queue->job), the variable is sometimes representative of the
spoolss layer job identifier, and more often representative of the
printing backend id.
This change renames the queue job identifier from queue->job to
queue->sysjob, in preparation for a change to only store the printing
backend identifier.
David Disseldorp [Mon, 30 Jan 2012 12:44:33 +0000 (13:44 +0100)]
s3-printing: remove print_parse_jobid() from print_cups.c
The spoolss print job identifier is now passed to the cups layer via
struct printjob, therefore it is no longer necessary to parse the job
filename to determine it.
David Disseldorp [Thu, 26 Jan 2012 14:28:34 +0000 (15:28 +0100)]
s3-printing: store print jobid as part of struct printjob
Printing code in some places relies upon the spool-file format to
retrieve the print jobid. By storing the jobid as part of struct
printjob, and hence in the printing TDB, we can move away from this ugly
behaviour.
David Disseldorp [Thu, 21 Jun 2012 15:12:23 +0000 (17:12 +0200)]
torture: add test for smbd print job spooling
Clients can print by performing file IO on a printer share, rather than
issuing spoolss RPCs.
This commit attempts to reproduce bug 8719.
Andrew Bartlett [Tue, 26 Jun 2012 11:06:25 +0000 (21:06 +1000)]
s3-pdbtest: Fix pdbtest to compare the same fields
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Tue Jun 26 16:09:28 CEST 2012 on sn-devel-104
Andrew Bartlett [Tue, 26 Jun 2012 10:53:08 +0000 (20:53 +1000)]
s4-samldb: do not talloc_steal() the elements of the original request
Andrew Bartlett [Tue, 26 Jun 2012 10:52:07 +0000 (20:52 +1000)]
s3-pdbtest: Report and handle errors in pdb->getsampwnam()
Andrew Bartlett [Tue, 26 Jun 2012 10:51:17 +0000 (20:51 +1000)]
s3-pdb_samba4: Allocate and free a talloc_stackframe() in pdb_samba4_replace_by_sam()
Volker Lendecke [Mon, 25 Jun 2012 10:23:22 +0000 (12:23 +0200)]
s3: Restore async i/o with the "native" AIO interface
eff3609 moved the async signal handler initialization to later in the process
to enable aio_fork and aio_pthread on platforms without realtime signals. This
commit broke the use of the native aio interface. aio_pending_size is
initialized to 0, so aio.c will not allow async i/0 at all if modules do not
set that variable correctly. Initialize to 100 right from the start.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Tue Jun 26 14:08:22 CEST 2012 on sn-devel-104
Stefan Metzmacher [Mon, 25 Jun 2012 06:13:59 +0000 (08:13 +0200)]
s3:smbXsrv_tcon: pass max_tcons explicitly for smbXsrv_tcon_table_init()
metze
Stefan Metzmacher [Mon, 25 Jun 2012 06:13:59 +0000 (08:13 +0200)]
s3:smbXsrv_session: pass max_sessions explicitly for smbXsrv_session_table_init()
metze
Rusty Russell [Tue, 26 Jun 2012 05:48:52 +0000 (15:18 +0930)]
tdb: finish weaning off err.h.
Commit
3c4263e7580143c69225729f5b67f09c00add2fd said it removed err.h
from tdb, unfortuntely it didn't: tap-interface.h still included it.
This finishes it properly!
Reported-by:Stefan Metzmacher <metze@samba.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User(master): Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date(master): Tue Jun 26 10:22:03 CEST 2012 on sn-devel-104
Björn Jacke [Mon, 25 Jun 2012 18:28:22 +0000 (20:28 +0200)]
s3:test_net_registry_check: eliminate "local" keyword in shell
prefer to use function syntax with (...) to make variables local
Autobuild-User(master): Björn Jacke <bj@sernet.de>
Autobuild-Date(master): Tue Jun 26 00:32:11 CEST 2012 on sn-devel-104
Björn Jacke [Mon, 25 Jun 2012 17:44:24 +0000 (19:44 +0200)]
s3:Makefile: use our "$MAKE" instead of "make" in our own Makefile
Stefan Metzmacher [Fri, 22 Jun 2012 12:08:30 +0000 (14:08 +0200)]
s3:selftest: run SMB2-SESSION-RECONNECT
metze
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Mon Jun 25 22:42:03 CEST 2012 on sn-devel-104
Stefan Metzmacher [Fri, 22 Jun 2012 12:26:42 +0000 (14:26 +0200)]
selftest/known: samba3.smb2.session.*reconnect passes now
metze
Stefan Metzmacher [Wed, 16 May 2012 22:32:40 +0000 (00:32 +0200)]
s3:smb2_sesssetup: make use of smb2srv_session_close_previous_send/recv
metze
Stefan Metzmacher [Mon, 14 May 2012 14:17:49 +0000 (16:17 +0200)]
s3:smbXsrv_session: react on MSG_SMBXSRV_SESSION_CLOSE
metze
Stefan Metzmacher [Tue, 17 Apr 2012 18:39:58 +0000 (20:39 +0200)]
s3:smbXsrv_session: add smb2srv_session_close_previous_send/recv
metze
Stefan Metzmacher [Mon, 11 Jun 2012 17:29:25 +0000 (19:29 +0200)]
s3:smbXsrv.idl: add smbXsrv_session_close*
metze
Stefan Metzmacher [Wed, 18 Apr 2012 10:44:12 +0000 (12:44 +0200)]
s3:messaging.idl: define MSG_SMBXSRV_SESSION_CLOSE
metze
Stefan Metzmacher [Wed, 16 May 2012 22:30:43 +0000 (00:30 +0200)]
s3:smb2_sesssetup: inline gensec_session_info() call
metze
Stefan Metzmacher [Wed, 16 May 2012 14:05:48 +0000 (16:05 +0200)]
s3:smb2_sesssetup: make use of gensec_update_send/recv
metze
Stefan Metzmacher [Wed, 16 May 2012 13:56:15 +0000 (15:56 +0200)]
s3:smb2_sesssetup: inline most of smbd_smb2_session_setup()
metze
Stefan Metzmacher [Fri, 22 Jun 2012 10:11:43 +0000 (12:11 +0200)]
s3:selftest: run raw.session
Note: raw.session.reauth2 still fails:
failure: samba3.raw.session.reauth2(s3dc) [
_StringException: _StringException: ../source4/torture/raw/session.c:186: status
was NT_STATUS_ACCESS_DENIED, expected NT_STATUS_OK: 2nd open failed
But it's not critical as real clients won't reauth as anonymous.
metze
Stefan Metzmacher [Fri, 22 Jun 2012 11:06:41 +0000 (13:06 +0200)]
s3:selftest: run rpc.samba3.smb-reauth1 and rpc.samba3.smb-reauth2
metze
Stefan Metzmacher [Wed, 25 Apr 2012 17:36:20 +0000 (19:36 +0200)]
s3:smbd/sesssetup: implement dynamic re-authentication and expire session if client supports it
metze
Stefan Metzmacher [Fri, 22 Jun 2012 11:06:01 +0000 (13:06 +0200)]
s3:selftest: run smbtorture3 SMB2-SESSION-REAUTH
metze
Stefan Metzmacher [Fri, 22 Jun 2012 11:03:16 +0000 (13:03 +0200)]
s3:selftest: run smb2.session as ntlm and krb5
This activates the smb2.session.expire1 test, when krb5 is used.
metze
Stefan Metzmacher [Thu, 17 May 2012 17:28:06 +0000 (19:28 +0200)]
selftest/knownfail: only reauth5 still fails
metze
Stefan Metzmacher [Mon, 14 May 2012 12:24:08 +0000 (14:24 +0200)]
s3:smb2_sesssetup: implement dynamic re-authentication and expire sessions
metze
Stefan Metzmacher [Sun, 3 Jun 2012 21:09:33 +0000 (23:09 +0200)]
docs-xml: document "server max protocol" SMB3 and SMB3_00
metze
Stefan Metzmacher [Sun, 3 Jun 2012 21:12:57 +0000 (23:12 +0200)]
docs-xml: fix reference from "server min protocol" to "server max protocol"
metze
Stefan Metzmacher [Fri, 18 May 2012 08:43:18 +0000 (10:43 +0200)]
selftest/Samba3: 'server max protocol = SMB3'
metze
Stefan Metzmacher [Sun, 3 Jun 2012 21:03:54 +0000 (23:03 +0200)]
lib/param: add "SMB3" as alias for PROTOCOL_SMB3_00
metze
Stefan Metzmacher [Sun, 3 Jun 2012 15:02:16 +0000 (17:02 +0200)]
s3:smbd: remove now unused invalidate_all_vuids()
Pair-Programmed-With: Michael Adam <obnox@samba.org>
metze
Michael Adam [Tue, 22 May 2012 11:23:13 +0000 (13:23 +0200)]
s3:smbd: remove now unused conn_close_all()
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Michael Adam [Tue, 22 May 2012 11:18:06 +0000 (13:18 +0200)]
s3:smbd: use smbXsrv_session_logoff_all() and smb1srv_tcon_disconnect_all() in exit_server_common()
This removes the use of conn_close_all() and invalidate_all_vuids()
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Stefan Metzmacher [Sun, 1 Apr 2012 19:19:53 +0000 (21:19 +0200)]
s3:smbd: make use of smbXsrv_session for smb1
Pair-Programmed-With: Michael Adam <obnox@samba.org>
metze