Andrew Bartlett [Sat, 2 Jun 2012 22:14:00 +0000 (08:14 +1000)]
libreplace: Use true rather than True in xattr.c
This should fix the build on IRIX.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Sun Jun 3 02:05:35 CEST 2012 on sn-devel-104
Andrew Bartlett [Sat, 2 Jun 2012 11:25:09 +0000 (21:25 +1000)]
libreplace: Fix build on MacOS where we have the same fn name but more arguments
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Sat Jun 2 15:52:51 CEST 2012 on sn-devel-104
Andrew Bartlett [Sat, 2 Jun 2012 11:05:34 +0000 (21:05 +1000)]
libreplace: Solaris needs system/dir.h for that xattr wrapper implementation
Andrew Bartlett [Sat, 2 Jun 2012 04:09:09 +0000 (14:09 +1000)]
build: Remove check for res_ninit (Revert "s3: Check for res_ninit")
This reverts commit
4f6b1e8c81776cf1fa386574e60e54fe6b4fe82e because I
cannot find any use of this configure check, and it is one of the
differences between the WAF and autoconf builds.
Andrew Bartlett
Andrew Bartlett [Sat, 2 Jun 2012 04:31:41 +0000 (14:31 +1000)]
build: Show extra configure results found by WAF as well
This may assist in debugging a difference in a configure test on the
build farm.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Sat Jun 2 09:46:09 CEST 2012 on sn-devel-104
Andrew Bartlett [Sat, 2 Jun 2012 04:15:42 +0000 (14:15 +1000)]
ccan: fix autoconf test for isblank()
The define in the C code is HAVE_ISBLANK
Andrew Bartlett
Andrew Bartlett [Sat, 2 Jun 2012 04:13:14 +0000 (14:13 +1000)]
libreplace: Add missing tests for HAVE_MREMAP and HAVE_SHARED_MMAP
Andrew Bartlett [Sat, 2 Jun 2012 03:08:32 +0000 (13:08 +1000)]
libreplace: Fix autoconf build on platforms needing xattrs
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Sat Jun 2 07:23:32 CEST 2012 on sn-devel-104
Andrew Bartlett [Sat, 2 Jun 2012 03:02:21 +0000 (13:02 +1000)]
build: Check correctly for sendfile (missing .h in header)
This will hopefully fix the build on SLES8, which does not support 64-bit sendfile.
Andrew Bartlett
Andrew Bartlett [Fri, 1 Jun 2012 23:28:04 +0000 (09:28 +1000)]
lib/replace: Relicence xattr.c to LGPLv3
By the kind consent of the copyright holders. (There wasn't any code from tridge
in the code brought in from source3/lib/system.c).
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Sat Jun 2 04:00:42 CEST 2012 on sn-devel-104
Andrew Bartlett [Fri, 1 Jun 2012 05:24:20 +0000 (15:24 +1000)]
build: Always attempt to build posix ACLs
These are on more systems than just linux. If the configure test passes
then assume it is available.
Andrew Bartlett
Andrew Bartlett [Fri, 1 Jun 2012 05:01:09 +0000 (15:01 +1000)]
lib/replace: Merge remaining xattr test details from lib/util
I prefer the longer XATTR_ADDITIONAL_OPTIONS define and the NULL
rather than 0 values in the getxattr test.
Andrew Bartlett
Andrew Bartlett [Fri, 1 Jun 2012 03:41:46 +0000 (13:41 +1000)]
s4-xattr: Use libreplace xattr functions directly
Andrew Bartlett [Fri, 1 Jun 2012 03:29:38 +0000 (13:29 +1000)]
lib/replace: xattr wrappers in lib/replace rather than source3/lib/system.c
This also moves all the still-used configure tests etc. The unused OSF API
is also removed at this time.
Andrew Bartlett
Andrew Bartlett [Fri, 1 Jun 2012 04:07:42 +0000 (14:07 +1000)]
lib/replace: We cannot use strchr_m in lib/replace
In any case, it is always safe to search for . even in a multibyte string.
Andrew Bartlett
Andrew Bartlett [Fri, 1 Jun 2012 04:05:10 +0000 (14:05 +1000)]
lib/replace: DEBUG is not acceptable here, as this may not be linked into Samba
Andrew Bartlett [Fri, 1 Jun 2012 04:14:45 +0000 (14:14 +1000)]
lib/replace: Copy lib/system.c xattr wrappers to lib/replace
Volker Lendecke [Fri, 1 Jun 2012 08:32:54 +0000 (10:32 +0200)]
s3: Same fix as
8576256, this time for fgetxattr
Signed-off-by: Jeremy Allison <jra@samba.org>
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Sat Jun 2 02:12:31 CEST 2012 on sn-devel-104
Volker Lendecke [Fri, 1 Jun 2012 13:15:07 +0000 (15:15 +0200)]
s3: Avoid a lot of calls to serverid_exists()
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Fri Jun 1 18:58:30 CEST 2012 on sn-devel-104
Alexander Bokovoy [Fri, 1 Jun 2012 12:38:56 +0000 (15:38 +0300)]
Revert "waf-mitkrb5: enable dcerpc_server library to support OpenChange client code"
This reverts commit
f8c447b1a48eaf12dcf70b92fd7525c4ad26c246.
After discussing with Julien (Openchange) and Metze, I decided to revert this code.
Instead I made a patch to Openchange which allows to build client side only.
Openchange server code requires working s4 member DC and --without-ad-dc build
does not provide working provisioning even if we enable dcerpc_server and end point mapper.
Autobuild-User: Alexander Bokovoy <ab@samba.org>
Autobuild-Date: Fri Jun 1 16:46:08 CEST 2012 on sn-devel-104
Alexander Bokovoy [Thu, 31 May 2012 09:44:50 +0000 (12:44 +0300)]
waf: check for krb5_create_checksum and krb5_creds.flags for some Heimdal versions
Signed-off-by: Andreas Schneider <asn@samba.org>
Autobuild-User: Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date: Fri Jun 1 11:23:21 CEST 2012 on sn-devel-104
Alexander Bokovoy [Thu, 31 May 2012 07:32:01 +0000 (10:32 +0300)]
waf-mitkrb5: enable dcerpc_server library to support OpenChange client code
Signed-off-by: Andreas Schneider <asn@samba.org>
Andrew Bartlett [Fri, 1 Jun 2012 00:38:55 +0000 (10:38 +1000)]
.gitignore: remove already-gone gen-8bit-gap.sh
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Fri Jun 1 04:53:53 CEST 2012 on sn-devel-104
Andrew Bartlett [Thu, 31 May 2012 23:48:20 +0000 (09:48 +1000)]
build: Add automatic compare of config.h files to recursive waf build
This uses the fact that we have both build systems running at the same time.
The krb5 checks are skipped because we typically are comparing internal Heimdal
with the system krb5, so they do not make sense.
The required checks for krb5 are pretty well understood in any case, as
we have a limited set of supported libraries.
Andrew Bartlett
Jeremy Allison [Thu, 31 May 2012 23:06:17 +0000 (16:06 -0700)]
Remove an unused variable.
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Fri Jun 1 03:03:12 CEST 2012 on sn-devel-104
Jeremy Allison [Thu, 31 May 2012 22:06:58 +0000 (15:06 -0700)]
Forward port of Richard Sharpe's <realrichardsharpe@gmail.com> fix for bug #8970 - Possible memory leaks in the samba master process.
Jeremy Allison [Thu, 31 May 2012 19:35:04 +0000 (12:35 -0700)]
We are triggering the cleanup_timeout_fn() too often, on exiting when an smbd is idle.
Calls to exit_server_cleanly() should be treated as a "clean" shutdown,
and not trigger the master smbd to call cleanup_timeout_fn.
Stefan Metzmacher [Thu, 31 May 2012 13:28:11 +0000 (15:28 +0200)]
s3:smbd: use server_messaging_context() instead of sconn->msg_ctx in exit_server_common()
sconn is not available in the parent anymore.
Thanks to Volker Lendecke <vl@samba.org> for finding this!
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Thu May 31 18:08:06 CEST 2012 on sn-devel-104
Stefan Metzmacher [Thu, 31 May 2012 07:28:31 +0000 (09:28 +0200)]
s3:vfs_hpuxacl: remove unused file_find_fd() calls
metze
Michael Adam [Wed, 30 May 2012 13:24:18 +0000 (15:24 +0200)]
wintest: use (renamed) smbclient4 tool as smbclient
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Thu May 31 13:23:34 CEST 2012 on sn-devel-104
Michael Adam [Wed, 30 May 2012 13:22:52 +0000 (15:22 +0200)]
wintest: introduce a variable to contain the (relative) path of smbclient
Volker Lendecke [Wed, 30 May 2012 07:08:49 +0000 (09:08 +0200)]
s3: Fix some 64-bit warnings
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Thu May 31 10:06:56 CEST 2012 on sn-devel-104
Michael Adam [Wed, 30 May 2012 11:10:57 +0000 (13:10 +0200)]
build: rename build targets smbclient -> smbclient4 and smbclient3 -> smbclient
Autobuild-User: Michael Adam <obnox@samba.org>
Autobuild-Date: Thu May 31 06:36:55 CEST 2012 on sn-devel-104
Michael Adam [Wed, 30 May 2012 10:21:42 +0000 (12:21 +0200)]
s4:selftest: change the blackbox.samba_tool_demote test to use a binary mapping for smbclient
Michael Adam [Wed, 30 May 2012 10:18:35 +0000 (12:18 +0200)]
s4:selftest: change the blackbox.passwords test to use a binary mapping for smbclient
Michael Adam [Wed, 30 May 2012 10:16:49 +0000 (12:16 +0200)]
s4:selftest: change the blackbox.pkinit test to use a binary mapping for smbclient
Michael Adam [Wed, 30 May 2012 10:15:10 +0000 (12:15 +0200)]
s4:selftest: change the blackbox.kinit test to use a binary mapping for smbclient
Michael Adam [Wed, 30 May 2012 10:09:25 +0000 (12:09 +0200)]
s4:selftest: change the blackbox.export.keytab test to use a binary mapping for smbclient
Michael Adam [Wed, 30 May 2012 10:07:18 +0000 (12:07 +0200)]
s4:selftest: change the blackbox.chgdcpass test to use a binary mapping for smbclient
Michael Adam [Wed, 30 May 2012 10:04:30 +0000 (12:04 +0200)]
s4:selftest: change the blackbox.samba_tool test to use a binary mapping for smbclient
Michael Adam [Wed, 30 May 2012 09:57:16 +0000 (11:57 +0200)]
s4:selftets: change the blackbox.bogusdomain test to use binary mapping for smbclient
Michael Adam [Wed, 30 May 2012 09:48:02 +0000 (11:48 +0200)]
s4:selftest: change the blackbox.smbclient test to use binary mapping for smbclient
Michael Adam [Thu, 24 May 2012 23:40:58 +0000 (01:40 +0200)]
s3:selftest: add a binary mapping for smbclient4
Michael Adam [Thu, 24 May 2012 23:40:32 +0000 (01:40 +0200)]
selftest: add a binary mapping for smbclient4
Michael Adam [Wed, 30 May 2012 11:09:57 +0000 (13:09 +0200)]
build: rename build targets nmblookup -> nmblookup4 and nmblookup3 -> nmblookup
Michael Adam [Wed, 30 May 2012 11:01:18 +0000 (13:01 +0200)]
build: add a build suffix ("4") for s4-binaries
Michael Adam [Tue, 29 May 2012 14:35:18 +0000 (16:35 +0200)]
s4:selftest: determine nmblookup via binary mapping for blackbox test in tests.py
Michael Adam [Thu, 24 May 2012 23:44:17 +0000 (01:44 +0200)]
selftest:Samba4: use the nmblookup4 binary mapping
Michael Adam [Thu, 24 May 2012 23:42:37 +0000 (01:42 +0200)]
s3:selftest: add a binary mapping for nmblookup4
Michael Adam [Thu, 24 May 2012 23:42:20 +0000 (01:42 +0200)]
selftest: add a binary mapping for nmblookup4
Michael Adam [Tue, 29 May 2012 11:59:14 +0000 (13:59 +0200)]
s3:selftest: improve strange linebreaks for blackbox tests in tests.py for readability
Michael Adam [Tue, 29 May 2012 11:51:05 +0000 (13:51 +0200)]
s3:selftest: introduce a variable for binpath('dbwrap_tool') in tests.py
Michael Adam [Tue, 29 May 2012 11:47:32 +0000 (13:47 +0200)]
s3:selftest: introduce a variable for binpath('ntlm_auth3') in tests.py
Michael Adam [Tue, 29 May 2012 11:45:49 +0000 (13:45 +0200)]
s3:selftest: introduce a variable for binpath('smbtorture3') in tests.py
Michael Adam [Tue, 29 May 2012 11:44:03 +0000 (13:44 +0200)]
s3:selftest: introduce a variable for binpath('net') in tests.py
Michael Adam [Tue, 29 May 2012 10:18:19 +0000 (12:18 +0200)]
s3:selftest: introduce a variable for binpath('wbinfo') in tests.py
to remove explicit calls to binpath('wbinfo')
Michael Adam [Tue, 29 May 2012 10:16:12 +0000 (12:16 +0200)]
s3:selftest: introduce a variable for binpath('smbclient3') to test.py
to remove manual calls to binpath("smbclient3")
Michael Adam [Tue, 29 May 2012 10:10:16 +0000 (12:10 +0200)]
s3:selftest: introduce a variable for binpath('nmblookup3') in tests.py
Michael Adam [Fri, 18 May 2012 13:02:31 +0000 (15:02 +0200)]
s3:build: fix some spacing in wscript_build
Jeremy Allison [Thu, 31 May 2012 00:12:10 +0000 (17:12 -0700)]
Stop spamming the logs with "Could not remove pid XX from serverid.tdb" messages and initiating the cleanup function on every process death.
We now have many sub-processes from smbd that don't serve SMB1/SMB2 requests and
don't register themselves in the serverid.tdb. Only initiate the cleanup
from processes that were explicitly in the child list.
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Thu May 31 04:44:09 CEST 2012 on sn-devel-104
Stefan Metzmacher [Wed, 30 May 2012 13:06:12 +0000 (15:06 +0200)]
lib/dbwrap: make it possible to delete/store the current record during traverse
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Thu May 31 02:50:09 CEST 2012 on sn-devel-104
Stefan Metzmacher [Wed, 30 May 2012 14:50:06 +0000 (16:50 +0200)]
lib/dbwrap: don't alter the record on failure in db_rbt_store()
metze
Stefan Metzmacher [Wed, 30 May 2012 14:48:39 +0000 (16:48 +0200)]
lib/dbwrap: fix db_rbt_store and update the per record node pointer
metze
Stefan Metzmacher [Wed, 30 May 2012 14:05:03 +0000 (16:05 +0200)]
lib/dbwrap: remove unused per db_record pointer in dbwrap_rbt
metze
Ira Cooper [Wed, 30 May 2012 18:50:06 +0000 (11:50 -0700)]
Fix bad bugfix for bug #8910 - resolve_ads() code can return zero addresses and miss valid DC IP addresses
Original code incorrectly used a while() instead of a for() loop.
We need to iterate over the entire array here.
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Wed May 30 23:29:03 CEST 2012 on sn-devel-104
Jeremy Allison [Tue, 29 May 2012 22:25:39 +0000 (15:25 -0700)]
Fix metze's complaint about the bugfix for bug #8953 - winbind can hang as nbt_getdc() has no timeout.
This code explicitly isn't needed as the tevent code will take
care of this.
Stefan Metzmacher [Wed, 30 May 2012 11:20:19 +0000 (13:20 +0200)]
s3:libsmb: use nb_connect_send() directly instead of doing a 0 timer for port 139
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Wed May 30 20:51:51 CEST 2012 on sn-devel-104
Günther Deschner [Wed, 30 May 2012 12:54:27 +0000 (14:54 +0200)]
selftest: bug #8373 is fixed and we should always test this now.
Guenther
Autobuild-User: Günther Deschner <gd@samba.org>
Autobuild-Date: Wed May 30 18:56:38 CEST 2012 on sn-devel-104
Amitay Isaacs [Wed, 30 May 2012 11:07:38 +0000 (21:07 +1000)]
dsdb: Fix error checking conditions in partition_metadata module
Thanks to Matthieu Patou <mat@matws.net> for pointing it out.
Autobuild-User: Amitay Isaacs <amitay@samba.org>
Autobuild-Date: Wed May 30 17:00:01 CEST 2012 on sn-devel-104
Volker Lendecke [Wed, 30 May 2012 11:01:33 +0000 (21:01 +1000)]
librpc: Fix an incompatible pointer type warning
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Andrew Bartlett [Wed, 30 May 2012 06:40:03 +0000 (16:40 +1000)]
s4-provision: Use the s3fs file server by default in migrations
This covers both migrations from s3 and joining a domain as a new DC.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Wed May 30 14:57:22 CEST 2012 on sn-devel-104
Andrew Bartlett [Wed, 30 May 2012 07:44:42 +0000 (17:44 +1000)]
s3-build: Fix configure checks for Heimdal
A series of small errors meant that all Heimdal versions became
unsupported, when for the autoconf build, some versions have what we
need.
Andrew Bartlett
Andrew Bartlett [Wed, 30 May 2012 09:21:12 +0000 (19:21 +1000)]
build: Make gss_wrap_iov mandatory for krb5 build
This isn't in Heimdal 1.1, so we still fail on that version, but at
least we fail for the right reasons.
Andrew Bartlett
Andrew Bartlett [Wed, 30 May 2012 07:41:51 +0000 (17:41 +1000)]
lib/krb5_wrap: Move krb5_princ_size helper to source4 as it is only used there
This is also where the related krb5_princ_component is declared.
Also fix the configure check to use the correct name
This helps the autoconf build on Heimdal.
Andrew Bartlett
Stefan Metzmacher [Wed, 30 May 2012 08:22:19 +0000 (10:22 +0200)]
s3:utils: use cli_tree_connect() instead of cli_tcon_andx()
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Wed May 30 12:54:05 CEST 2012 on sn-devel-104
Stefan Metzmacher [Wed, 30 May 2012 08:20:11 +0000 (10:20 +0200)]
s3:libsmb: use cli_tree_connect() instead of cli_tcon_andx()
cli_tree_connect() is more generic and uses what the server supports
metze
Stefan Metzmacher [Wed, 30 May 2012 08:07:21 +0000 (10:07 +0200)]
s3:libsmb: fallback to SMBtcon for old servers
metze
Andrew Bartlett [Mon, 28 May 2012 05:00:12 +0000 (15:00 +1000)]
s3-loadparm: Swap synonyms of max/min protocol to server max/min protocol
This matches the lib/param code, as is a seperate parameter for the
client there.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Wed May 30 06:04:41 CEST 2012 on sn-devel-104
Andrew Bartlett [Tue, 29 May 2012 22:23:38 +0000 (08:23 +1000)]
s3-build: We do not have CHARSET modules any more
Andrew Bartlett [Mon, 28 May 2012 07:30:44 +0000 (17:30 +1000)]
lib/param: Put common FN_ macros into param_functions.c
This will in turn make it possible to put the actual parameter
definitions in common.
Andrew Bartlett
Andrew Bartlett [Mon, 28 May 2012 07:35:30 +0000 (17:35 +1000)]
lib/param: Add a few more s3 parameters
Andrew Bartlett [Mon, 28 May 2012 07:28:04 +0000 (17:28 +1000)]
s3-param: Use same function name for "max xmit" as lib/param
Again, this helps with merging the FN_ list.
Andrew Bartlett
Andrew Bartlett [Mon, 28 May 2012 07:19:07 +0000 (17:19 +1000)]
s3-param: Use same variable names as lib/param
Again, this helps with merging the FN_ list.
Andrew Bartlett
Andrew Bartlett [Mon, 28 May 2012 07:14:05 +0000 (17:14 +1000)]
s3-param: Import parameters from lib/param to make this list common
This will allow the list of FN_ macros to be made a common .c file.
Andrew Bartlett
Andrew Bartlett [Mon, 28 May 2012 06:51:47 +0000 (16:51 +1000)]
s3-param: Rename lp_dns_proxy() -> lp_wins_dns_proxy() for clarity
This avoids some confusion now we have a DNS server as well.
Andrew Bartlett
Andrew Bartlett [Mon, 28 May 2012 06:51:15 +0000 (16:51 +1000)]
lib/param: Import s3 parameters into lib/param to allow the parameter lists merge
This will allow us to create just one list of the FN_ macros, included
into both parameter systems.
This will in turn allow the actual parameter definitions
to be merged in a similar way.
Andrew Bartlett
Andrew Bartlett [Mon, 28 May 2012 06:34:14 +0000 (16:34 +1000)]
lib/param: Mark a few more parameters const (matching s3)
While this makes no difference in the lib/param code, this allows the C files
to be compared and merged.
Andrew Bartlett
Andrew Bartlett [Mon, 28 May 2012 06:26:11 +0000 (16:26 +1000)]
param: mark realm parameter as const
Andrew Bartlett [Mon, 28 May 2012 05:17:44 +0000 (15:17 +1000)]
param: Sort global param functions macros to ease the s3/s4 merge
This makes it easier to them merge these two function lists without
changing the meaning of the output.
Andrew Bartlett
Andrew Bartlett [Mon, 28 May 2012 04:55:39 +0000 (14:55 +1000)]
lib/param: Add .flags to max/min protocol to match s3
This reduces the difference in the parameter tables.
Andrew Bartlett
Andrew Bartlett [Mon, 28 May 2012 04:53:26 +0000 (14:53 +1000)]
lib/param: Add .flags to wins parameters to match s3
This reduces the difference in the parameter tables.
Andrew Bartlett
Andrew Bartlett [Mon, 28 May 2012 04:47:28 +0000 (14:47 +1000)]
lib/param: Harmonise 'password server' parameter between s3 and s4
Andrew Bartlett [Tue, 22 May 2012 01:56:50 +0000 (11:56 +1000)]
s3-build: Remove build of libtdb.so from the autoconf build
We now either link tdb statically or we use the system provided tdb
This means that we now only have one build system for externally-available
tdb, which in turn ensures we have a consistent shared library built as
libtdb.so
Andrew Bartlett
Andrew Bartlett [Tue, 22 May 2012 01:55:49 +0000 (11:55 +1000)]
s3-build: Remove build of libtalloc.so from the autoconf build
We now either link talloc statically or we use the system provided talloc
This means that we now only have one build system for externally-available
talloc, which in turn ensures we have a consistent shared library built as
libtalloc.so
Andrew Bartlett
Andrew Bartlett [Mon, 28 May 2012 02:13:14 +0000 (12:13 +1000)]
s3-iconv: Remove unused script/gen-8bit-gap.sh
We decided to rely on a system iconv rather than these
modules.
Andrew Bartlett
Andrew Bartlett [Mon, 28 May 2012 02:50:34 +0000 (12:50 +1000)]
build: Provide .pc file for libsmbsharemodes
This is not the exact same file as the autoconf build, because of
the differnet processing semantics.
Andrew Bartlett
Andrew Bartlett [Mon, 28 May 2012 02:50:05 +0000 (12:50 +1000)]
build: Provide .pc file for libnetapi
This is not the exact same file as the autoconf build, because of
the differnet processing semantics.
Andrew Bartlett
Andrew Bartlett [Tue, 29 May 2012 08:56:56 +0000 (18:56 +1000)]
build: Remove unused release scripts for tevent
These now use waf dist, and the script/librelease.sh script as a wrapper.
The mksyms.sh call in the source3/Makefile uses the copy in source3/script
Andrew Bartlett
Andrew Bartlett [Tue, 29 May 2012 08:56:36 +0000 (18:56 +1000)]
build: Remove unused release scripts for tdb
These now use waf dist, and the script/librelease.sh script as a wrapper.
The mksyms.sh call in the source3/Makefile uses the copy in source3/script
Andrew Bartlett
Andrew Bartlett [Mon, 28 May 2012 02:15:05 +0000 (12:15 +1000)]
build: Remove unused release scripts for talloc
These now use waf dist, and the script/librelease.sh script as a wrapper.
The mksyms.sh call in the source3/Makefile uses the copy in source3/script
Andrew Bartlett