BMC support for PARISC machines
authorThomas Bogendoerfer <tsbogend@alpha.franken.de>
Thu, 5 Sep 2013 11:36:36 +0000 (06:36 -0500)
committerLinus Torvalds <torvalds@linux-foundation.org>
Thu, 5 Sep 2013 15:34:32 +0000 (08:34 -0700)
The last line of PARISC machines (C8000, RP34x0, etc.) have a BMC for
controlling temperature, fan speed and other stuff.  The BMC is
connected via a special bus and listed in the firmware device tree.
This change adds support for these BMCs to the IPMI driver.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/char/ipmi/ipmi_si_intf.c

index 810372c0a22f982121d47beb718669969f36427a..15e4a6031934f35f09793116daa7e522a7dfa0e1 100644 (file)
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 
+#ifdef CONFIG_PARISC
+#include <asm/hardware.h>      /* for register_parisc_driver() stuff */
+#include <asm/parisc-device.h>
+#endif
+
 #define PFX "ipmi_si: "
 
 /* Measure times between events in the driver. */
@@ -298,6 +303,9 @@ static int pci_registered;
 #ifdef CONFIG_ACPI
 static int pnp_registered;
 #endif
+#ifdef CONFIG_PARISC
+static int parisc_registered;
+#endif
 
 static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
 static int num_max_busy_us;
@@ -2699,6 +2707,62 @@ static struct platform_driver ipmi_driver = {
        .remove         = ipmi_remove,
 };
 
+#ifdef CONFIG_PARISC
+static int ipmi_parisc_probe(struct parisc_device *dev)
+{
+       struct smi_info *info;
+
+       info = smi_info_alloc();
+
+       if (!info) {
+               dev_err(&dev->dev,
+                       "could not allocate memory for PARISC probe\n");
+               return -ENOMEM;
+       }
+
+       info->si_type           = SI_KCS;
+       info->addr_source       = SI_DEVICETREE;
+       info->io_setup          = mem_setup;
+       info->io.addr_type      = IPMI_MEM_ADDR_SPACE;
+       info->io.addr_data      = dev->hpa.start;
+       info->io.regsize        = 1;
+       info->io.regspacing     = 1;
+       info->io.regshift       = 0;
+       info->irq               = 0; /* no interrupt */
+       info->irq_setup         = NULL;
+       info->dev               = &dev->dev;
+
+       dev_dbg(&dev->dev, "addr 0x%lx\n", info->io.addr_data);
+
+       dev_set_drvdata(&dev->dev, info);
+
+       if (add_smi(info)) {
+               kfree(info);
+               return -EBUSY;
+       }
+
+       return 0;
+}
+
+static int ipmi_parisc_remove(struct parisc_device *dev)
+{
+       cleanup_one_si(dev_get_drvdata(&dev->dev));
+       return 0;
+}
+
+static struct parisc_device_id ipmi_parisc_tbl[] = {
+       { HPHW_MC, HVERSION_REV_ANY_ID, 0x004, 0xC0 },
+       { 0, }
+};
+
+static struct parisc_driver ipmi_parisc_driver = {
+       .name =         "ipmi",
+       .id_table =     ipmi_parisc_tbl,
+       .probe =        ipmi_parisc_probe,
+       .remove =       ipmi_parisc_remove,
+};
+#endif /* CONFIG_PARISC */
+
 static int wait_for_msg_done(struct smi_info *smi_info)
 {
        enum si_sm_result     smi_result;
@@ -3464,6 +3528,13 @@ static int init_ipmi_si(void)
                spmi_find_bmc();
 #endif
 
+#ifdef CONFIG_PARISC
+       register_parisc_driver(&ipmi_parisc_driver);
+       parisc_registered = 1;
+       /* poking PC IO addresses will crash machine, don't do it */
+       si_trydefaults = 0;
+#endif
+
        /* We prefer devices with interrupts, but in the case of a machine
           with multiple BMCs we assume that there will be several instances
           of a given type so if we succeed in registering a type then also
@@ -3610,6 +3681,10 @@ static void cleanup_ipmi_si(void)
        if (pnp_registered)
                pnp_unregister_driver(&ipmi_pnp_driver);
 #endif
+#ifdef CONFIG_PARISC
+       if (parisc_registered)
+               unregister_parisc_driver(&ipmi_parisc_driver);
+#endif
 
        platform_driver_unregister(&ipmi_driver);