spi-imx: strip down chipselect function to only drive the chipselect
authorUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Thu, 1 Oct 2009 22:44:33 +0000 (15:44 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Thu, 1 Oct 2009 23:11:17 +0000 (16:11 -0700)
spi_imx_chipselect() made things that should be (and mostly are) done by
spi_imx_setupxfer.  Only setting the tx and rx functions was missing.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/spi/spi_imx.c

index 2fec1170b6c0dff1e215c07b9110a275964a0cb0..89c22efedfb0db8102339a06a35847205424771a 100644 (file)
@@ -354,43 +354,14 @@ static int mx1_rx_available(struct spi_imx_data *spi_imx)
 static void spi_imx_chipselect(struct spi_device *spi, int is_active)
 {
        struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
-       unsigned int cs = 0;
        int gpio = spi_imx->chipselect[spi->chip_select];
-       struct spi_imx_config config;
-
-       if (spi->mode & SPI_CS_HIGH)
-               cs = 1;
+       int active = is_active != BITBANG_CS_INACTIVE;
+       int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH);
 
-       if (is_active == BITBANG_CS_INACTIVE) {
-               if (gpio >= 0)
-                       gpio_set_value(gpio, !cs);
+       if (gpio < 0)
                return;
-       }
-
-       config.bpw = spi->bits_per_word;
-       config.speed_hz = spi->max_speed_hz;
-       config.mode = spi->mode;
-       config.cs = spi_imx->chipselect[spi->chip_select];
-
-       spi_imx->config(spi_imx, &config);
-
-       /* Initialize the functions for transfer */
-       if (config.bpw <= 8) {
-               spi_imx->rx = spi_imx_buf_rx_u8;
-               spi_imx->tx = spi_imx_buf_tx_u8;
-       } else if (config.bpw <= 16) {
-               spi_imx->rx = spi_imx_buf_rx_u16;
-               spi_imx->tx = spi_imx_buf_tx_u16;
-       } else if (config.bpw <= 32) {
-               spi_imx->rx = spi_imx_buf_rx_u32;
-               spi_imx->tx = spi_imx_buf_tx_u32;
-       } else
-               BUG();
-
-       if (gpio >= 0)
-               gpio_set_value(gpio, cs);
 
-       return;
+       gpio_set_value(gpio, dev_is_lowactive ^ active);
 }
 
 static void spi_imx_push(struct spi_imx_data *spi_imx)
@@ -451,6 +422,19 @@ static int spi_imx_setupxfer(struct spi_device *spi,
        if (!config.speed_hz)
                config.speed_hz = spi->max_speed_hz;
 
+       /* Initialize the functions for transfer */
+       if (config.bpw <= 8) {
+               spi_imx->rx = spi_imx_buf_rx_u8;
+               spi_imx->tx = spi_imx_buf_tx_u8;
+       } else if (config.bpw <= 16) {
+               spi_imx->rx = spi_imx_buf_rx_u16;
+               spi_imx->tx = spi_imx_buf_tx_u16;
+       } else if (config.bpw <= 32) {
+               spi_imx->rx = spi_imx_buf_rx_u32;
+               spi_imx->tx = spi_imx_buf_tx_u32;
+       } else
+               BUG();
+
        spi_imx->config(spi_imx, &config);
 
        return 0;