ASoC: Add device tree binding for WM8776
authorMark Brown <broonie@opensource.wolfsonmicro.com>
Mon, 29 Aug 2011 13:14:45 +0000 (14:14 +0100)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Wed, 31 Aug 2011 08:52:50 +0000 (09:52 +0100)
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Documentation/devicetree/bindings/sound/wm8776.txt [new file with mode: 0644]
sound/soc/codecs/wm8776.c

diff --git a/Documentation/devicetree/bindings/sound/wm8776.txt b/Documentation/devicetree/bindings/sound/wm8776.txt
new file mode 100644 (file)
index 0000000..3b9ca49
--- /dev/null
@@ -0,0 +1,18 @@
+WM8776 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8776"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Example:
+
+codec: wm8776@1a {
+       compatible = "wlf,wm8776";
+       reg = <0x1a>;
+};
index 367a990e6cc4a049d271b7c0e6261ab40e16b639..0cfbfc1dc0933003e1eec65f54a4ce951367a492 100644 (file)
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/i2c.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
@@ -452,6 +453,12 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8776 = {
        .reg_cache_default = wm8776_reg,
 };
 
+static const struct of_device_id wm8776_of_match[] = {
+       { .compatible = "wlf,wm8776", },
+       { }
+};
+MODULE_DEVICE_TABLE(of, wm8776_of_match);
+
 #if defined(CONFIG_SPI_MASTER)
 static int __devinit wm8776_spi_probe(struct spi_device *spi)
 {
@@ -483,6 +490,7 @@ static struct spi_driver wm8776_spi_driver = {
        .driver = {
                .name   = "wm8776",
                .owner  = THIS_MODULE,
+               .of_match_table = wm8776_of_match,
        },
        .probe          = wm8776_spi_probe,
        .remove         = __devexit_p(wm8776_spi_remove),
@@ -527,6 +535,7 @@ static struct i2c_driver wm8776_i2c_driver = {
        .driver = {
                .name = "wm8776",
                .owner = THIS_MODULE,
+               .of_match_table = wm8776_of_match,
        },
        .probe =    wm8776_i2c_probe,
        .remove =   __devexit_p(wm8776_i2c_remove),