TERMLDFLAGS=@TERMLDFLAGS@
TERMLIBS=@TERMLIBS@
-LIBTOOL=@LIBTOOL@ --quiet
-LIBTOOL_DEPS=@LIBTOOL_DEPS@
-LINK=$(LIBTOOL) --mode=link $(CC) $(FLAGS) $(LDFLAGS)
+LINK=$(CC) $(FLAGS) $(LDFLAGS)
INSTALLCMD=@INSTALL@
-o $@
@BROKEN_CC@ -mv `echo $@ | sed 's%^.*/%%g'` $@
-# This is for libtool
-.c.lo:
- @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
- dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
- @echo Compiling $< with libtool
- @$(LIBTOOL) --mode=compile \
- $(CC) -I. -I$(srcdir) $(FLAGS) -c $< \
- -o $@
-
.c.po:
@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
ac_default_prefix=/usr/local/samba
ac_help="$ac_help
--enable-debug turn on debugging [default=no]"
-ac_help="$ac_help
- --enable-shared[=PKGS] build shared libraries [default=yes]"
-ac_help="$ac_help
- --enable-static[=PKGS] build static libraries [default=yes]"
-ac_help="$ac_help
- --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
-ac_help="$ac_help
- --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
-ac_help="$ac_help
- --disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
--with-codepagedir=DIR Where to put codepage files (\$libdir/codepages)"
ac_help="$ac_help
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:650: checking for $ac_word" >&5
+echo "configure:640: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:680: checking for $ac_word" >&5
+echo "configure:670: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:731: checking for $ac_word" >&5
+echo "configure:721: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:763: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:753: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 774 "configure"
+#line 764 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:779: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:769: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:805: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:795: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:810: checking whether we are using GNU C" >&5
+echo "configure:800: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:809: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:838: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:828: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:900: checking for a BSD compatible install" >&5
+echo "configure:890: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:957: checking for $ac_word" >&5
+echo "configure:947: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$AWK" && break
done
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
- p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac
-else
- enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
- enableval="$enable_static"
- p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac
-else
- enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
- enableval="$enable_fast_install"
- p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac
-else
- enable_fast_install=yes
-fi
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1062: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
- case $nonopt in
- NONE)
- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
- fi ;;
- *) host_alias=$nonopt ;;
- esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1083: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
- case $nonopt in
- NONE) build_alias=$host_alias ;;
- *) build_alias=$nonopt ;;
- esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
- withval="$with_gnu_ld"
- test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1142: checking for ld used by GCC" >&5
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
- # Accept absolute paths.
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1166: checking for GNU ld" >&5
-else
- echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1169: checking for non-GNU ld" >&5
-fi
-if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-else
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
- echo "$ac_t""$LD" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1204: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- ac_cv_prog_gnu_ld=yes
-else
- ac_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
-
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1220: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$NM"; then
- # Let the user override the test.
- ac_cv_path_NM="$NM"
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
- break
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
- break
- else
- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi
-fi
-
-NM="$ac_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1256: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
- rm -f conftestdata
- ac_cv_prog_LN_S="ln -s"
-else
- ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-case "$target" in
-NONE) lt_target="$host" ;;
-*) lt_target="$target" ;;
-esac
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval="$enable_libtool_lock"
- :
-fi
-
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$lt_target" in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '#line 1305 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1306: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- case "`/usr/bin/file conftest.o`" in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1327: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1332 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:1339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- lt_cv_cc_needs_belf=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-
-
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs. It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already. You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
-if cmp -s $cache_file confcache; then
- :
-else
- if test -w $cache_file; then
- echo "updating cache $cache_file"
- cat confcache > $cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
-fi
-rm -f confcache
-
-
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
- echo "loading cache $cache_file"
- . $cache_file
-else
- echo "creating cache $cache_file"
- > $cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-
if test "x$CC" != xcc; then
echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
-echo "configure:1444: checking whether $CC and cc understand -c and -o together" >&5
+echo "configure:979: checking whether $CC and cc understand -c and -o together" >&5
else
echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
-echo "configure:1447: checking whether cc understands -c and -o together" >&5
+echo "configure:982: checking whether cc understands -c and -o together" >&5
fi
set dummy $CC; ac_cc="`echo $2 |
sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
# We do the test twice because some compilers refuse to overwrite an
# existing .o file with -o, though they will create one.
ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
-if { (eval echo configure:1459: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1460: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+if { (eval echo configure:994: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:995: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
eval ac_cv_prog_cc_${ac_cc}_c_o=yes
if test "x$CC" != xcc; then
# Test first that cc exists at all.
- if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1465: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1000: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
ac_try='cc -c conftest.c -o conftest.o 1>&5'
- if { (eval echo configure:1467: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1468: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+ if { (eval echo configure:1002: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1003: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
# cc works too.
:
echo $ac_n "checking that the C compiler understands volatile""... $ac_c" 1>&6
-echo "configure:1502: checking that the C compiler understands volatile" >&5
+echo "configure:1037: checking that the C compiler understands volatile" >&5
if eval "test \"`echo '$''{'samba_cv_volatile'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1508 "configure"
+#line 1043 "configure"
#include "confdefs.h"
#include <sys/types.h>
int main() {
volatile int i = 0
; return 0; }
EOF
-if { (eval echo configure:1515: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1050: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_volatile=yes
else
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1584: checking host system type" >&5
+echo "configure:1119: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1605: checking target system type" >&5
+echo "configure:1140: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1623: checking build system type" >&5
+echo "configure:1158: checking build system type" >&5
build_alias=$build
case "$build_alias" in
echo $ac_n "checking config.cache system type""... $ac_c" 1>&6
-echo "configure:1657: checking config.cache system type" >&5
+echo "configure:1192: checking config.cache system type" >&5
if { test x"${ac_cv_host_system_type+set}" = x"set" &&
test x"$ac_cv_host_system_type" != x"$host"; } ||
{ test x"${ac_cv_build_system_type+set}" = x"set" &&
# Try to work out if this is the native HPUX compiler that uses the -Ae flag.
*hpux*)
echo $ac_n "checking whether ${CC-cc} accepts -Ae""... $ac_c" 1>&6
-echo "configure:1682: checking whether ${CC-cc} accepts -Ae" >&5
+echo "configure:1217: checking whether ${CC-cc} accepts -Ae" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_Ae'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*sysv4*)
if test $host = mips-sni-sysv4 ; then
echo $ac_n "checking for LFS support""... $ac_c" 1>&6
-echo "configure:1766: checking for LFS support" >&5
+echo "configure:1301: checking for LFS support" >&5
old_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="-D_LARGEFILE64_SOURCE $CPPFLAGS"
if test "$cross_compiling" = yes; then
SINIX_LFS_SUPPORT=cross
else
cat > conftest.$ac_ext <<EOF
-#line 1773 "configure"
+#line 1308 "configure"
#include "confdefs.h"
#include <unistd.h>
#endif
}
EOF
-if { (eval echo configure:1785: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
SINIX_LFS_SUPPORT=yes
else
#
*linux*)
echo $ac_n "checking for LFS support""... $ac_c" 1>&6
-echo "configure:1812: checking for LFS support" >&5
+echo "configure:1347: checking for LFS support" >&5
old_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE $CPPFLAGS"
if test "$cross_compiling" = yes; then
LINUX_LFS_SUPPORT=cross
else
cat > conftest.$ac_ext <<EOF
-#line 1819 "configure"
+#line 1354 "configure"
#include "confdefs.h"
#include <unistd.h>
}
EOF
-if { (eval echo configure:1857: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
LINUX_LFS_SUPPORT=yes
else
*hurd*)
echo $ac_n "checking for LFS support""... $ac_c" 1>&6
-echo "configure:1878: checking for LFS support" >&5
+echo "configure:1413: checking for LFS support" >&5
old_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="-D_LARGEFILE64_SOURCE -D_GNU_SOURCE $CPPFLAGS"
if test "$cross_compiling" = yes; then
GLIBC_LFS_SUPPORT=cross
else
cat > conftest.$ac_ext <<EOF
-#line 1885 "configure"
+#line 1420 "configure"
#include "confdefs.h"
#include <unistd.h>
#endif
}
EOF
-if { (eval echo configure:1897: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1432: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
GLIBC_LFS_SUPPORT=yes
else
esac
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1919: checking for inline" >&5
+echo "configure:1454: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 1926 "configure"
+#line 1461 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:1933: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1468: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1959: checking how to run the C preprocessor" >&5
+echo "configure:1494: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1974 "configure"
+#line 1509 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1980: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1515: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1991 "configure"
+#line 1526 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1997: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1532: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2008 "configure"
+#line 1543 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2014: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1549: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2039: checking for ANSI C header files" >&5
+echo "configure:1574: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2044 "configure"
+#line 1579 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2052: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1587: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2069 "configure"
+#line 1604 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2087 "configure"
+#line 1622 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2108 "configure"
+#line 1643 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2119: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:2147: checking for $ac_hdr that defines DIR" >&5
+echo "configure:1682: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2152 "configure"
+#line 1687 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:2160: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1695: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:2185: checking for opendir in -ldir" >&5
+echo "configure:1720: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2193 "configure"
+#line 1728 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:2204: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1739: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:2226: checking for opendir in -lx" >&5
+echo "configure:1761: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2234 "configure"
+#line 1769 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:2245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:2268: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:1803: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2273 "configure"
+#line 1808 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:2282: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1817: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:2303: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:1838: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2308 "configure"
+#line 1843 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:2324: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1859: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2348: checking for $ac_hdr" >&5
+echo "configure:1883: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2353 "configure"
+#line 1888 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2358: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1893: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2388: checking for $ac_hdr" >&5
+echo "configure:1923: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2393 "configure"
+#line 1928 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2398: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1933: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2428: checking for $ac_hdr" >&5
+echo "configure:1963: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2433 "configure"
+#line 1968 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2438: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1973: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2468: checking for $ac_hdr" >&5
+echo "configure:2003: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2473 "configure"
+#line 2008 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2478: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2013: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2508: checking for $ac_hdr" >&5
+echo "configure:2043: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2513 "configure"
+#line 2048 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2518: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2053: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2548: checking for $ac_hdr" >&5
+echo "configure:2083: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2553 "configure"
+#line 2088 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2558: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2093: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2588: checking for $ac_hdr" >&5
+echo "configure:2123: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2593 "configure"
+#line 2128 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2598: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2133: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2628: checking for $ac_hdr" >&5
+echo "configure:2163: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2633 "configure"
+#line 2168 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2638: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2173: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
case "$host_os" in
*hpux*)
cat > conftest.$ac_ext <<EOF
-#line 2672 "configure"
+#line 2207 "configure"
#include "confdefs.h"
#include <shadow.h>
int main() {
struct spwd testme
; return 0; }
EOF
-if { (eval echo configure:2679: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2214: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_shadow_h=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2701: checking for $ac_hdr" >&5
+echo "configure:2236: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2706 "configure"
+#line 2241 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2711: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2246: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2741: checking for $ac_hdr" >&5
+echo "configure:2276: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2746 "configure"
+#line 2281 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2751: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2286: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2781: checking for $ac_hdr" >&5
+echo "configure:2316: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2786 "configure"
+#line 2321 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2791: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2326: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2821: checking for $ac_hdr" >&5
+echo "configure:2356: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2826 "configure"
+#line 2361 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2831: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2366: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2861: checking for $ac_hdr" >&5
+echo "configure:2396: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2866 "configure"
+#line 2401 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2871: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2406: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2903: checking for $ac_hdr" >&5
+echo "configure:2438: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2908 "configure"
+#line 2443 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2913: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2448: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2945: checking for $ac_hdr" >&5
+echo "configure:2480: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2950 "configure"
+#line 2485 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2490: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:2983: checking size of int" >&5
+echo "configure:2518: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_int=cross
else
cat > conftest.$ac_ext <<EOF
-#line 2991 "configure"
+#line 2526 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <sys/types.h>
exit(0);
}
EOF
-if { (eval echo configure:3003: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2538: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int=`cat conftestval`
else
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:3023: checking size of long" >&5
+echo "configure:2558: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long=cross
else
cat > conftest.$ac_ext <<EOF
-#line 3031 "configure"
+#line 2566 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <sys/types.h>
exit(0);
}
EOF
-if { (eval echo configure:3043: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:3063: checking size of short" >&5
+echo "configure:2598: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_short=cross
else
cat > conftest.$ac_ext <<EOF
-#line 3071 "configure"
+#line 2606 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <sys/types.h>
exit(0);
}
EOF
-if { (eval echo configure:3083: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2618: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_short=`cat conftestval`
else
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:3104: checking for working const" >&5
+echo "configure:2639: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3109 "configure"
+#line 2644 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:3158: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2693: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:3179: checking for inline" >&5
+echo "configure:2714: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 3186 "configure"
+#line 2721 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:3193: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2728: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:3219: checking whether byte ordering is bigendian" >&5
+echo "configure:2754: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 3226 "configure"
+#line 2761 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:3237: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2772: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 3241 "configure"
+#line 2776 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:3252: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2787: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 3272 "configure"
+#line 2807 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:3285: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2820: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
fi
echo $ac_n "checking whether char is unsigned""... $ac_c" 1>&6
-echo "configure:3309: checking whether char is unsigned" >&5
+echo "configure:2844: checking whether char is unsigned" >&5
if eval "test \"`echo '$''{'ac_cv_c_char_unsigned'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$GCC" = yes; then
# GCC predefines this symbol on systems where it applies.
cat > conftest.$ac_ext <<EOF
-#line 3316 "configure"
+#line 2851 "configure"
#include "confdefs.h"
#ifdef __CHAR_UNSIGNED__
yes
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 3338 "configure"
+#line 2873 "configure"
#include "confdefs.h"
/* volatile prevents gcc2 from optimizing the test away on sparcs. */
#if !defined(__STDC__) || __STDC__ != 1
volatile char c = 255; exit(c < 0);
}
EOF
-if { (eval echo configure:3348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2883: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_char_unsigned=yes
else
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:3373: checking return type of signal handlers" >&5
+echo "configure:2908: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3378 "configure"
+#line 2913 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
int i;
; return 0; }
EOF
-if { (eval echo configure:3395: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2930: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:3414: checking for uid_t in sys/types.h" >&5
+echo "configure:2949: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3419 "configure"
+#line 2954 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
fi
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:3448: checking for mode_t" >&5
+echo "configure:2983: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3453 "configure"
+#line 2988 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:3481: checking for off_t" >&5
+echo "configure:3016: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3486 "configure"
+#line 3021 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:3514: checking for size_t" >&5
+echo "configure:3049: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3519 "configure"
+#line 3054 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:3547: checking for pid_t" >&5
+echo "configure:3082: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3552 "configure"
+#line 3087 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for st_rdev in struct stat""... $ac_c" 1>&6
-echo "configure:3580: checking for st_rdev in struct stat" >&5
+echo "configure:3115: checking for st_rdev in struct stat" >&5
if eval "test \"`echo '$''{'ac_cv_struct_st_rdev'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3585 "configure"
+#line 3120 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
struct stat s; s.st_rdev;
; return 0; }
EOF
-if { (eval echo configure:3593: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3128: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_st_rdev=yes
else
fi
echo $ac_n "checking for d_off in dirent""... $ac_c" 1>&6
-echo "configure:3614: checking for d_off in dirent" >&5
+echo "configure:3149: checking for d_off in dirent" >&5
if eval "test \"`echo '$''{'ac_cv_dirent_d_off'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3619 "configure"
+#line 3154 "configure"
#include "confdefs.h"
#include <unistd.h>
struct dirent d; d.d_off;
; return 0; }
EOF
-if { (eval echo configure:3629: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3164: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_dirent_d_off=yes
else
fi
echo $ac_n "checking for ino_t""... $ac_c" 1>&6
-echo "configure:3650: checking for ino_t" >&5
+echo "configure:3185: checking for ino_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_ino_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3655 "configure"
+#line 3190 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for loff_t""... $ac_c" 1>&6
-echo "configure:3683: checking for loff_t" >&5
+echo "configure:3218: checking for loff_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_loff_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3688 "configure"
+#line 3223 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for offset_t""... $ac_c" 1>&6
-echo "configure:3716: checking for offset_t" >&5
+echo "configure:3251: checking for offset_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_offset_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3721 "configure"
+#line 3256 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:3749: checking for ssize_t" >&5
+echo "configure:3284: checking for ssize_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3754 "configure"
+#line 3289 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for wchar_t""... $ac_c" 1>&6
-echo "configure:3782: checking for wchar_t" >&5
+echo "configure:3317: checking for wchar_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_wchar_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3787 "configure"
+#line 3322 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# we need libcups for CUPS support...
echo $ac_n "checking for httpConnect in -lcups""... $ac_c" 1>&6
-echo "configure:3817: checking for httpConnect in -lcups" >&5
+echo "configure:3352: checking for httpConnect in -lcups" >&5
ac_lib_var=`echo cups'_'httpConnect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcups $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3825 "configure"
+#line 3360 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
httpConnect()
; return 0; }
EOF
-if { (eval echo configure:3836: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3371: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# we need libdl for PAM and the new VFS code
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:3866: checking for dlopen in -ldl" >&5
+echo "configure:3401: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3874 "configure"
+#line 3409 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:3885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for socklen_t type""... $ac_c" 1>&6
-echo "configure:3911: checking for socklen_t type" >&5
+echo "configure:3446: checking for socklen_t type" >&5
if eval "test \"`echo '$''{'samba_cv_socklen_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3917 "configure"
+#line 3452 "configure"
#include "confdefs.h"
#include <sys/types.h>
socklen_t i = 0
; return 0; }
EOF
-if { (eval echo configure:3930: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3465: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_socklen_t=yes
else
fi
echo $ac_n "checking for sig_atomic_t type""... $ac_c" 1>&6
-echo "configure:3951: checking for sig_atomic_t type" >&5
+echo "configure:3486: checking for sig_atomic_t type" >&5
if eval "test \"`echo '$''{'samba_cv_sig_atomic_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3957 "configure"
+#line 3492 "configure"
#include "confdefs.h"
#include <sys/types.h>
sig_atomic_t i = 0
; return 0; }
EOF
-if { (eval echo configure:3970: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3505: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_sig_atomic_t=yes
else
# stupid headers have the functions but no declaration. grrrr.
echo $ac_n "checking for errno declaration""... $ac_c" 1>&6
-echo "configure:3993: checking for errno declaration" >&5
+echo "configure:3528: checking for errno declaration" >&5
if eval "test \"`echo '$''{'ac_cv_have_errno_decl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3999 "configure"
+#line 3534 "configure"
#include "confdefs.h"
#include <errno.h>
int main() {
int i = (int)errno
; return 0; }
EOF
-if { (eval echo configure:4006: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3541: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_errno_decl=yes
else
echo $ac_n "checking for setresuid declaration""... $ac_c" 1>&6
-echo "configure:4028: checking for setresuid declaration" >&5
+echo "configure:3563: checking for setresuid declaration" >&5
if eval "test \"`echo '$''{'ac_cv_have_setresuid_decl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4034 "configure"
+#line 3569 "configure"
#include "confdefs.h"
#include <unistd.h>
int main() {
int i = (int)setresuid
; return 0; }
EOF
-if { (eval echo configure:4041: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3576: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_setresuid_decl=yes
else
echo $ac_n "checking for setresgid declaration""... $ac_c" 1>&6
-echo "configure:4063: checking for setresgid declaration" >&5
+echo "configure:3598: checking for setresgid declaration" >&5
if eval "test \"`echo '$''{'ac_cv_have_setresgid_decl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4069 "configure"
+#line 3604 "configure"
#include "confdefs.h"
#include <unistd.h>
int main() {
int i = (int)setresgid
; return 0; }
EOF
-if { (eval echo configure:4076: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3611: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_setresgid_decl=yes
else
echo $ac_n "checking for asprintf declaration""... $ac_c" 1>&6
-echo "configure:4098: checking for asprintf declaration" >&5
+echo "configure:3633: checking for asprintf declaration" >&5
if eval "test \"`echo '$''{'ac_cv_have_asprintf_decl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4104 "configure"
+#line 3639 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
int i = (int)asprintf
; return 0; }
EOF
-if { (eval echo configure:4111: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3646: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_asprintf_decl=yes
else
echo $ac_n "checking for vasprintf declaration""... $ac_c" 1>&6
-echo "configure:4133: checking for vasprintf declaration" >&5
+echo "configure:3668: checking for vasprintf declaration" >&5
if eval "test \"`echo '$''{'ac_cv_have_vasprintf_decl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4139 "configure"
+#line 3674 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
int i = (int)vasprintf
; return 0; }
EOF
-if { (eval echo configure:4146: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3681: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_vasprintf_decl=yes
else
echo $ac_n "checking for vsnprintf declaration""... $ac_c" 1>&6
-echo "configure:4168: checking for vsnprintf declaration" >&5
+echo "configure:3703: checking for vsnprintf declaration" >&5
if eval "test \"`echo '$''{'ac_cv_have_vsnprintf_decl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4174 "configure"
+#line 3709 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
int i = (int)vsnprintf
; return 0; }
EOF
-if { (eval echo configure:4181: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3716: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_vsnprintf_decl=yes
else
echo $ac_n "checking for snprintf declaration""... $ac_c" 1>&6
-echo "configure:4203: checking for snprintf declaration" >&5
+echo "configure:3738: checking for snprintf declaration" >&5
if eval "test \"`echo '$''{'ac_cv_have_snprintf_decl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4209 "configure"
+#line 3744 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
int i = (int)snprintf
; return 0; }
EOF
-if { (eval echo configure:4216: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3751: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_have_snprintf_decl=yes
else
# and glibc has setresuid under linux but the function does
# nothing until kernel 2.1.44! very dumb.
echo $ac_n "checking for real setresuid""... $ac_c" 1>&6
-echo "configure:4240: checking for real setresuid" >&5
+echo "configure:3775: checking for real setresuid" >&5
if eval "test \"`echo '$''{'samba_cv_have_setresuid'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_have_setresuid=cross
else
cat > conftest.$ac_ext <<EOF
-#line 4249 "configure"
+#line 3784 "configure"
#include "confdefs.h"
#include <errno.h>
main() { setresuid(1,1,1); setresuid(2,2,2); exit(errno==EPERM?0:1);}
EOF
-if { (eval echo configure:4254: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3789: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_have_setresuid=yes
else
# Do the same check for setresguid...
#
echo $ac_n "checking for real setresgid""... $ac_c" 1>&6
-echo "configure:4279: checking for real setresgid" >&5
+echo "configure:3814: checking for real setresgid" >&5
if eval "test \"`echo '$''{'samba_cv_have_setresgid'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_have_setresgid=cross
else
cat > conftest.$ac_ext <<EOF
-#line 4288 "configure"
+#line 3823 "configure"
#include "confdefs.h"
#include <unistd.h>
#include <errno.h>
main() { errno = 0; setresgid(1,1,1); exit(errno != 0 ? (errno==EPERM ? 0 : 1) : 0);}
EOF
-if { (eval echo configure:4294: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3829: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_have_setresgid=yes
else
fi
echo $ac_n "checking for 8-bit clean memcmp""... $ac_c" 1>&6
-echo "configure:4317: checking for 8-bit clean memcmp" >&5
+echo "configure:3852: checking for 8-bit clean memcmp" >&5
if eval "test \"`echo '$''{'ac_cv_func_memcmp_clean'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_memcmp_clean=no
else
cat > conftest.$ac_ext <<EOF
-#line 4325 "configure"
+#line 3860 "configure"
#include "confdefs.h"
main()
}
EOF
-if { (eval echo configure:4335: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3870: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_memcmp_clean=yes
else
for ac_func in crypt
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4358: checking for $ac_func" >&5
+echo "configure:3893: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4363 "configure"
+#line 3898 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4386: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test x"$ac_cv_func_crypt" = x"no"; then
echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
-echo "configure:4412: checking for crypt in -lcrypt" >&5
+echo "configure:3947: checking for crypt in -lcrypt" >&5
ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcrypt $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4420 "configure"
+#line 3955 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
crypt()
; return 0; }
EOF
-if { (eval echo configure:4431: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3966: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# test for where we get readline() from
echo $ac_n "checking whether to use readline""... $ac_c" 1>&6
-echo "configure:4464: checking whether to use readline" >&5
+echo "configure:3999: checking whether to use readline" >&5
# Check whether --with-readline or --without-readline was given.
if test "${with_readline+set}" = set; then
withval="$with_readline"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4476: checking for $ac_hdr" >&5
+echo "configure:4011: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4481 "configure"
+#line 4016 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4486: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4021: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4516: checking for $ac_hdr" >&5
+echo "configure:4051: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4521 "configure"
+#line 4056 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4526: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4061: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4557: checking for $ac_hdr" >&5
+echo "configure:4092: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4562 "configure"
+#line 4097 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4567: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4102: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for termlib in ncurses curses termcap terminfo termlib; do
echo $ac_n "checking for tgetent in -l${termlib}""... $ac_c" 1>&6
-echo "configure:4590: checking for tgetent in -l${termlib}" >&5
+echo "configure:4125: checking for tgetent in -l${termlib}" >&5
ac_lib_var=`echo ${termlib}'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l${termlib} $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4598 "configure"
+#line 4133 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:4609: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4144: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
done
echo $ac_n "checking for rl_callback_handler_install in -lreadline""... $ac_c" 1>&6
-echo "configure:4631: checking for rl_callback_handler_install in -lreadline" >&5
+echo "configure:4166: checking for rl_callback_handler_install in -lreadline" >&5
ac_lib_var=`echo readline'_'rl_callback_handler_install | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lreadline $TERMLIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4639 "configure"
+#line 4174 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
rl_callback_handler_install()
; return 0; }
EOF
-if { (eval echo configure:4650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4701: checking for $ac_hdr" >&5
+echo "configure:4236: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4706 "configure"
+#line 4241 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4711: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4246: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4741: checking for $ac_hdr" >&5
+echo "configure:4276: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4746 "configure"
+#line 4281 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4751: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4286: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4782: checking for $ac_hdr" >&5
+echo "configure:4317: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4787 "configure"
+#line 4322 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4792: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4327: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for termlib in ncurses curses termcap terminfo termlib; do
echo $ac_n "checking for tgetent in -l${termlib}""... $ac_c" 1>&6
-echo "configure:4815: checking for tgetent in -l${termlib}" >&5
+echo "configure:4350: checking for tgetent in -l${termlib}" >&5
ac_lib_var=`echo ${termlib}'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l${termlib} $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4823 "configure"
+#line 4358 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:4834: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4369: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
done
echo $ac_n "checking for rl_callback_handler_install in -lreadline""... $ac_c" 1>&6
-echo "configure:4856: checking for rl_callback_handler_install in -lreadline" >&5
+echo "configure:4391: checking for rl_callback_handler_install in -lreadline" >&5
ac_lib_var=`echo readline'_'rl_callback_handler_install | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lreadline $TERMLIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4864 "configure"
+#line 4399 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
rl_callback_handler_install()
; return 0; }
EOF
-if { (eval echo configure:4875: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in connect
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4930: checking for $ac_func" >&5
+echo "configure:4465: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4935 "configure"
+#line 4470 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4958: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4493: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
case "$LIBS" in
*-lnsl*) ;;
*) echo $ac_n "checking for printf in -lnsl_s""... $ac_c" 1>&6
-echo "configure:4986: checking for printf in -lnsl_s" >&5
+echo "configure:4521: checking for printf in -lnsl_s" >&5
ac_lib_var=`echo nsl_s'_'printf | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl_s $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4994 "configure"
+#line 4529 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
printf()
; return 0; }
EOF
-if { (eval echo configure:5005: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4540: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
case "$LIBS" in
*-lnsl*) ;;
*) echo $ac_n "checking for printf in -lnsl""... $ac_c" 1>&6
-echo "configure:5036: checking for printf in -lnsl" >&5
+echo "configure:4571: checking for printf in -lnsl" >&5
ac_lib_var=`echo nsl'_'printf | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5044 "configure"
+#line 4579 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
printf()
; return 0; }
EOF
-if { (eval echo configure:5055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4590: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
case "$LIBS" in
*-lsocket*) ;;
*) echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:5086: checking for connect in -lsocket" >&5
+echo "configure:4621: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5094 "configure"
+#line 4629 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
connect()
; return 0; }
EOF
-if { (eval echo configure:5105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4640: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
case "$LIBS" in
*-linet*) ;;
*) echo $ac_n "checking for connect in -linet""... $ac_c" 1>&6
-echo "configure:5136: checking for connect in -linet" >&5
+echo "configure:4671: checking for connect in -linet" >&5
ac_lib_var=`echo inet'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-linet $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5144 "configure"
+#line 4679 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
connect()
; return 0; }
EOF
-if { (eval echo configure:5155: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in yp_get_default_domain
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5199: checking for $ac_func" >&5
+echo "configure:4734: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5204 "configure"
+#line 4739 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5227: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4762: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test x"$ac_cv_func_yp_get_default_domain" = x"no"; then
echo $ac_n "checking for yp_get_default_domain in -lnsl""... $ac_c" 1>&6
-echo "configure:5253: checking for yp_get_default_domain in -lnsl" >&5
+echo "configure:4788: checking for yp_get_default_domain in -lnsl" >&5
ac_lib_var=`echo nsl'_'yp_get_default_domain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5261 "configure"
+#line 4796 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yp_get_default_domain()
; return 0; }
EOF
-if { (eval echo configure:5272: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in execl
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5302: checking for $ac_func" >&5
+echo "configure:4837: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5307 "configure"
+#line 4842 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4865: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in waitpid getcwd strdup strtoul strerror chown fchown chmod fchmod chroot
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5363: checking for $ac_func" >&5
+echo "configure:4898: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5368 "configure"
+#line 4903 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5391: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4926: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in fstat strchr utime utimes getrlimit fsync bzero memset
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5418: checking for $ac_func" >&5
+echo "configure:4953: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5423 "configure"
+#line 4958 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4981: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in memmove vsnprintf snprintf asprintf vasprintf setsid glob strpbrk pipe crypt16 getauthuid
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5473: checking for $ac_func" >&5
+echo "configure:5008: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5478 "configure"
+#line 5013 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5501: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in strftime sigprocmask sigblock sigaction innetgr setnetgrent getnetgrent endnetgrent
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5528: checking for $ac_func" >&5
+echo "configure:5063: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5533 "configure"
+#line 5068 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5556: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5091: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in initgroups select poll rdchk getgrnam getgrent pathconf
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5583: checking for $ac_func" >&5
+echo "configure:5118: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5588 "configure"
+#line 5123 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in setpriv setgidx setuidx setgroups sysconf mktime rename ftruncate stat64 fstat64
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5638: checking for $ac_func" >&5
+echo "configure:5173: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5643 "configure"
+#line 5178 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5666: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in lstat64 fopen64 atexit grantpt dup2 lseek64 ftruncate64 readdir64
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5693: checking for $ac_func" >&5
+echo "configure:5228: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5698 "configure"
+#line 5233 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5721: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5256: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in fseek64 fseeko64 ftell64 ftello64 setluid getpwanam setlinebuf
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5748: checking for $ac_func" >&5
+echo "configure:5283: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5753 "configure"
+#line 5288 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5776: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5311: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in srandom random srand rand setenv usleep strcasecmp fcvt fcvtl symlink readlink
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5803: checking for $ac_func" >&5
+echo "configure:5338: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5808 "configure"
+#line 5343 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5366: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in setbuffer
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5859: checking for $ac_func" >&5
+echo "configure:5394: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5864 "configure"
+#line 5399 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5422: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in syscall
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5916: checking for $ac_func" >&5
+echo "configure:5451: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5921 "configure"
+#line 5456 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5944: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in _dup _dup2 _opendir _readdir _seekdir _telldir _closedir
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5972: checking for $ac_func" >&5
+echo "configure:5507: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5977 "configure"
+#line 5512 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6000: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5535: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in __dup __dup2 __opendir __readdir __seekdir __telldir __closedir
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6027: checking for $ac_func" >&5
+echo "configure:5562: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6032 "configure"
+#line 5567 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5590: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in __getcwd _getcwd
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6082: checking for $ac_func" >&5
+echo "configure:5617: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6087 "configure"
+#line 5622 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6110: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5645: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in __xstat __fxstat __lxstat
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6137: checking for $ac_func" >&5
+echo "configure:5672: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6142 "configure"
+#line 5677 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5700: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in _stat _lstat _fstat __stat __lstat __fstat
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6192: checking for $ac_func" >&5
+echo "configure:5727: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6197 "configure"
+#line 5732 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6220: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5755: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in _acl __acl _facl __facl _open __open _chdir __chdir
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6247: checking for $ac_func" >&5
+echo "configure:5782: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6252 "configure"
+#line 5787 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in _close __close _fchdir __fchdir _fcntl __fcntl
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6302: checking for $ac_func" >&5
+echo "configure:5837: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6307 "configure"
+#line 5842 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5865: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in getdents _getdents __getdents _lseek __lseek _read __read
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6357: checking for $ac_func" >&5
+echo "configure:5892: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6362 "configure"
+#line 5897 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6385: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5920: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in _write __write _fork __fork
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6412: checking for $ac_func" >&5
+echo "configure:5947: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6417 "configure"
+#line 5952 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6440: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in _stat64 __stat64 _fstat64 __fstat64 _lstat64 __lstat64
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6467: checking for $ac_func" >&5
+echo "configure:6002: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6472 "configure"
+#line 6007 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6030: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in __sys_llseek llseek _llseek __llseek readdir64 _readdir64 __readdir64
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6522: checking for $ac_func" >&5
+echo "configure:6057: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6527 "configure"
+#line 6062 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6550: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6085: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in pread _pread __pread pread64 _pread64 __pread64
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6577: checking for $ac_func" >&5
+echo "configure:6112: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6582 "configure"
+#line 6117 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6605: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6140: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in pwrite _pwrite __pwrite pwrite64 _pwrite64 __pwrite64
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6632: checking for $ac_func" >&5
+echo "configure:6167: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6637 "configure"
+#line 6172 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6195: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in open64 _open64 __open64 creat64
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6687: checking for $ac_func" >&5
+echo "configure:6222: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6692 "configure"
+#line 6227 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6715: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test x$ac_cv_func_stat64 = xno ; then
echo $ac_n "checking for stat64 in <sys/stat.h>""... $ac_c" 1>&6
-echo "configure:6746: checking for stat64 in <sys/stat.h>" >&5
+echo "configure:6281: checking for stat64 in <sys/stat.h>" >&5
cat > conftest.$ac_ext <<EOF
-#line 6748 "configure"
+#line 6283 "configure"
#include "confdefs.h"
#if defined(HAVE_UNISTD_H)
struct stat64 st64; exit(stat64(".",&st64));
; return 0; }
EOF
-if { (eval echo configure:6760: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6295: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_stat64=yes
else
if test x$ac_cv_func_lstat64 = xno ; then
echo $ac_n "checking for lstat64 in <sys/stat.h>""... $ac_c" 1>&6
-echo "configure:6779: checking for lstat64 in <sys/stat.h>" >&5
+echo "configure:6314: checking for lstat64 in <sys/stat.h>" >&5
cat > conftest.$ac_ext <<EOF
-#line 6781 "configure"
+#line 6316 "configure"
#include "confdefs.h"
#if defined(HAVE_UNISTD_H)
struct stat64 st64; exit(lstat64(".",&st64));
; return 0; }
EOF
-if { (eval echo configure:6793: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6328: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_lstat64=yes
else
if test x$ac_cv_func_fstat64 = xno ; then
echo $ac_n "checking for fstat64 in <sys/stat.h>""... $ac_c" 1>&6
-echo "configure:6812: checking for fstat64 in <sys/stat.h>" >&5
+echo "configure:6347: checking for fstat64 in <sys/stat.h>" >&5
cat > conftest.$ac_ext <<EOF
-#line 6814 "configure"
+#line 6349 "configure"
#include "confdefs.h"
#if defined(HAVE_UNISTD_H)
struct stat64 st64; exit(fstat64(0,&st64));
; return 0; }
EOF
-if { (eval echo configure:6826: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6361: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_fstat64=yes
else
if test x$ac_cv_func_strcasecmp = xno ; then
echo $ac_n "checking for strcasecmp in -lresolv""... $ac_c" 1>&6
-echo "configure:6851: checking for strcasecmp in -lresolv" >&5
+echo "configure:6386: checking for strcasecmp in -lresolv" >&5
ac_lib_var=`echo resolv'_'strcasecmp | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6859 "configure"
+#line 6394 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strcasecmp()
; return 0; }
EOF
-if { (eval echo configure:6870: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
*-lsecurity*) for ac_func in putprpwnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6906: checking for $ac_func" >&5
+echo "configure:6441: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6911 "configure"
+#line 6446 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6934: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6469: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
;;
*) echo $ac_n "checking for putprpwnam in -lsecurity""... $ac_c" 1>&6
-echo "configure:6959: checking for putprpwnam in -lsecurity" >&5
+echo "configure:6494: checking for putprpwnam in -lsecurity" >&5
ac_lib_var=`echo security'_'putprpwnam | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsecurity $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6967 "configure"
+#line 6502 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
putprpwnam()
; return 0; }
EOF
-if { (eval echo configure:6978: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6513: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in putprpwnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7008: checking for $ac_func" >&5
+echo "configure:6543: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7013 "configure"
+#line 6548 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6571: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*-lsec*) for ac_func in putprpwnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7067: checking for $ac_func" >&5
+echo "configure:6602: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7072 "configure"
+#line 6607 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7095: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6630: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
;;
*) echo $ac_n "checking for putprpwnam in -lsec""... $ac_c" 1>&6
-echo "configure:7120: checking for putprpwnam in -lsec" >&5
+echo "configure:6655: checking for putprpwnam in -lsec" >&5
ac_lib_var=`echo sec'_'putprpwnam | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsec $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7128 "configure"
+#line 6663 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
putprpwnam()
; return 0; }
EOF
-if { (eval echo configure:7139: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6674: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in putprpwnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7169: checking for $ac_func" >&5
+echo "configure:6704: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7174 "configure"
+#line 6709 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7197: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6732: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*-lsecurity*) for ac_func in set_auth_parameters
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7229: checking for $ac_func" >&5
+echo "configure:6764: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7234 "configure"
+#line 6769 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6792: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
;;
*) echo $ac_n "checking for set_auth_parameters in -lsecurity""... $ac_c" 1>&6
-echo "configure:7282: checking for set_auth_parameters in -lsecurity" >&5
+echo "configure:6817: checking for set_auth_parameters in -lsecurity" >&5
ac_lib_var=`echo security'_'set_auth_parameters | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsecurity $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7290 "configure"
+#line 6825 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
set_auth_parameters()
; return 0; }
EOF
-if { (eval echo configure:7301: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6836: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in set_auth_parameters
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7331: checking for $ac_func" >&5
+echo "configure:6866: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7336 "configure"
+#line 6871 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6894: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*-lsec*) for ac_func in set_auth_parameters
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7390: checking for $ac_func" >&5
+echo "configure:6925: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7395 "configure"
+#line 6930 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7418: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6953: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
;;
*) echo $ac_n "checking for set_auth_parameters in -lsec""... $ac_c" 1>&6
-echo "configure:7443: checking for set_auth_parameters in -lsec" >&5
+echo "configure:6978: checking for set_auth_parameters in -lsec" >&5
ac_lib_var=`echo sec'_'set_auth_parameters | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsec $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7451 "configure"
+#line 6986 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
set_auth_parameters()
; return 0; }
EOF
-if { (eval echo configure:7462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6997: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in set_auth_parameters
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7492: checking for $ac_func" >&5
+echo "configure:7027: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7497 "configure"
+#line 7032 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7520: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*-lgen*) for ac_func in getspnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7553: checking for $ac_func" >&5
+echo "configure:7088: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7558 "configure"
+#line 7093 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7581: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7116: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
;;
*) echo $ac_n "checking for getspnam in -lgen""... $ac_c" 1>&6
-echo "configure:7606: checking for getspnam in -lgen" >&5
+echo "configure:7141: checking for getspnam in -lgen" >&5
ac_lib_var=`echo gen'_'getspnam | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgen $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7614 "configure"
+#line 7149 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
getspnam()
; return 0; }
EOF
-if { (eval echo configure:7625: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in getspnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7655: checking for $ac_func" >&5
+echo "configure:7190: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7660 "configure"
+#line 7195 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7218: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*-lsecurity*) for ac_func in getspnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7715: checking for $ac_func" >&5
+echo "configure:7250: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7720 "configure"
+#line 7255 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7278: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
;;
*) echo $ac_n "checking for getspnam in -lsecurity""... $ac_c" 1>&6
-echo "configure:7768: checking for getspnam in -lsecurity" >&5
+echo "configure:7303: checking for getspnam in -lsecurity" >&5
ac_lib_var=`echo security'_'getspnam | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsecurity $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7776 "configure"
+#line 7311 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
getspnam()
; return 0; }
EOF
-if { (eval echo configure:7787: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7322: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in getspnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7817: checking for $ac_func" >&5
+echo "configure:7352: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7822 "configure"
+#line 7357 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7845: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7380: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*-lsec*) for ac_func in getspnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7876: checking for $ac_func" >&5
+echo "configure:7411: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7881 "configure"
+#line 7416 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
;;
*) echo $ac_n "checking for getspnam in -lsec""... $ac_c" 1>&6
-echo "configure:7929: checking for getspnam in -lsec" >&5
+echo "configure:7464: checking for getspnam in -lsec" >&5
ac_lib_var=`echo sec'_'getspnam | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsec $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7937 "configure"
+#line 7472 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
getspnam()
; return 0; }
EOF
-if { (eval echo configure:7948: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7483: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in getspnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7978: checking for $ac_func" >&5
+echo "configure:7513: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7983 "configure"
+#line 7518 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:8006: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7541: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*-lsecurity*) for ac_func in bigcrypt
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:8038: checking for $ac_func" >&5
+echo "configure:7573: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8043 "configure"
+#line 7578 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:8066: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
;;
*) echo $ac_n "checking for bigcrypt in -lsecurity""... $ac_c" 1>&6
-echo "configure:8091: checking for bigcrypt in -lsecurity" >&5
+echo "configure:7626: checking for bigcrypt in -lsecurity" >&5
ac_lib_var=`echo security'_'bigcrypt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsecurity $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 8099 "configure"
+#line 7634 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bigcrypt()
; return 0; }
EOF
-if { (eval echo configure:8110: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7645: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in bigcrypt
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:8140: checking for $ac_func" >&5
+echo "configure:7675: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8145 "configure"
+#line 7680 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:8168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7703: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*-lsec*) for ac_func in bigcrypt
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:8199: checking for $ac_func" >&5
+echo "configure:7734: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8204 "configure"
+#line 7739 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:8227: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7762: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
;;
*) echo $ac_n "checking for bigcrypt in -lsec""... $ac_c" 1>&6
-echo "configure:8252: checking for bigcrypt in -lsec" >&5
+echo "configure:7787: checking for bigcrypt in -lsec" >&5
ac_lib_var=`echo sec'_'bigcrypt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsec $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 8260 "configure"
+#line 7795 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bigcrypt()
; return 0; }
EOF
-if { (eval echo configure:8271: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in bigcrypt
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:8301: checking for $ac_func" >&5
+echo "configure:7836: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8306 "configure"
+#line 7841 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:8329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7864: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*-lsecurity*) for ac_func in getprpwnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:8361: checking for $ac_func" >&5
+echo "configure:7896: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8366 "configure"
+#line 7901 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:8389: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7924: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
;;
*) echo $ac_n "checking for getprpwnam in -lsecurity""... $ac_c" 1>&6
-echo "configure:8414: checking for getprpwnam in -lsecurity" >&5
+echo "configure:7949: checking for getprpwnam in -lsecurity" >&5
ac_lib_var=`echo security'_'getprpwnam | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsecurity $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 8422 "configure"
+#line 7957 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
getprpwnam()
; return 0; }
EOF
-if { (eval echo configure:8433: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7968: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in getprpwnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:8463: checking for $ac_func" >&5
+echo "configure:7998: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8468 "configure"
+#line 8003 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:8491: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8026: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*-lsec*) for ac_func in getprpwnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:8522: checking for $ac_func" >&5
+echo "configure:8057: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8527 "configure"
+#line 8062 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:8550: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8085: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
;;
*) echo $ac_n "checking for getprpwnam in -lsec""... $ac_c" 1>&6
-echo "configure:8575: checking for getprpwnam in -lsec" >&5
+echo "configure:8110: checking for getprpwnam in -lsec" >&5
ac_lib_var=`echo sec'_'getprpwnam | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsec $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 8583 "configure"
+#line 8118 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
getprpwnam()
; return 0; }
EOF
-if { (eval echo configure:8594: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8129: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in getprpwnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:8624: checking for $ac_func" >&5
+echo "configure:8159: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8629 "configure"
+#line 8164 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:8652: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8187: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
*dgux*) # Extract the first word of "groff", so it can be a program name with args.
set dummy groff; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8762: checking for $ac_word" >&5
+echo "configure:8297: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ROFF'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# try to work out how to produce PIC code with this compiler
echo $ac_n "checking whether ${CC-cc} accepts -fPIC""... $ac_c" 1>&6
-echo "configure:8817: checking whether ${CC-cc} accepts -fPIC" >&5
+echo "configure:8352: checking whether ${CC-cc} accepts -fPIC" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_fPIC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test x$PICFLAG = x; then
echo $ac_n "checking whether ${CC-cc} accepts -KPIC""... $ac_c" 1>&6
-echo "configure:8837: checking whether ${CC-cc} accepts -KPIC" >&5
+echo "configure:8372: checking whether ${CC-cc} accepts -KPIC" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_KPIC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test x$PICFLAG = x; then
echo $ac_n "checking whether ${CC-cc} accepts -Kpic""... $ac_c" 1>&6
-echo "configure:8858: checking whether ${CC-cc} accepts -Kpic" >&5
+echo "configure:8393: checking whether ${CC-cc} accepts -Kpic" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_Kpic'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
################
echo $ac_n "checking for long long""... $ac_c" 1>&6
-echo "configure:8881: checking for long long" >&5
+echo "configure:8416: checking for long long" >&5
if eval "test \"`echo '$''{'samba_cv_have_longlong'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_have_longlong=cross
else
cat > conftest.$ac_ext <<EOF
-#line 8890 "configure"
+#line 8425 "configure"
#include "confdefs.h"
#include <stdio.h>
main() { long long x = 1000000; x *= x; exit(((x/1000000) == 1000000)? 0: 1); }
EOF
-if { (eval echo configure:8895: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_have_longlong=yes
else
# AIX needs this.
echo $ac_n "checking for LL suffix on long long integers""... $ac_c" 1>&6
-echo "configure:8922: checking for LL suffix on long long integers" >&5
+echo "configure:8457: checking for LL suffix on long long integers" >&5
if eval "test \"`echo '$''{'samba_cv_compiler_supports_ll'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8928 "configure"
+#line 8463 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
long long i = 0x8000000000LL
; return 0; }
EOF
-if { (eval echo configure:8935: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8470: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_compiler_supports_ll=yes
else
echo $ac_n "checking for 64 bit off_t""... $ac_c" 1>&6
-echo "configure:8957: checking for 64 bit off_t" >&5
+echo "configure:8492: checking for 64 bit off_t" >&5
if eval "test \"`echo '$''{'samba_cv_SIZEOF_OFF_T'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_SIZEOF_OFF_T=cross
else
cat > conftest.$ac_ext <<EOF
-#line 8966 "configure"
+#line 8501 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <sys/stat.h>
main() { exit((sizeof(off_t) == 8) ? 0 : 1); }
EOF
-if { (eval echo configure:8972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8507: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_SIZEOF_OFF_T=yes
else
fi
echo $ac_n "checking for off64_t""... $ac_c" 1>&6
-echo "configure:8995: checking for off64_t" >&5
+echo "configure:8530: checking for off64_t" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_OFF64_T'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_OFF64_T=cross
else
cat > conftest.$ac_ext <<EOF
-#line 9004 "configure"
+#line 8539 "configure"
#include "confdefs.h"
#if defined(HAVE_UNISTD_H)
#include <sys/stat.h>
main() { struct stat64 st; off64_t s; if (sizeof(off_t) == sizeof(off64_t)) exit(1); exit((lstat64("/dev/null", &st)==0)?0:1); }
EOF
-if { (eval echo configure:9014: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8549: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_OFF64_T=yes
else
fi
echo $ac_n "checking for 64 bit ino_t""... $ac_c" 1>&6
-echo "configure:9037: checking for 64 bit ino_t" >&5
+echo "configure:8572: checking for 64 bit ino_t" >&5
if eval "test \"`echo '$''{'samba_cv_SIZEOF_INO_T'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_SIZEOF_INO_T=cross
else
cat > conftest.$ac_ext <<EOF
-#line 9046 "configure"
+#line 8581 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <sys/stat.h>
main() { exit((sizeof(ino_t) == 8) ? 0 : 1); }
EOF
-if { (eval echo configure:9052: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8587: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_SIZEOF_INO_T=yes
else
fi
echo $ac_n "checking for ino64_t""... $ac_c" 1>&6
-echo "configure:9075: checking for ino64_t" >&5
+echo "configure:8610: checking for ino64_t" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_INO64_T'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_INO64_T=cross
else
cat > conftest.$ac_ext <<EOF
-#line 9084 "configure"
+#line 8619 "configure"
#include "confdefs.h"
#if defined(HAVE_UNISTD_H)
#include <sys/stat.h>
main() { struct stat64 st; ino64_t s; if (sizeof(ino_t) == sizeof(ino64_t)) exit(1); exit((lstat64("/dev/null", &st)==0)?0:1); }
EOF
-if { (eval echo configure:9094: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8629: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_INO64_T=yes
else
fi
echo $ac_n "checking for struct dirent64""... $ac_c" 1>&6
-echo "configure:9117: checking for struct dirent64" >&5
+echo "configure:8652: checking for struct dirent64" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_STRUCT_DIRENT64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9123 "configure"
+#line 8658 "configure"
#include "confdefs.h"
#if defined(HAVE_UNISTD_H)
struct dirent64 de;
; return 0; }
EOF
-if { (eval echo configure:9135: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8670: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_STRUCT_DIRENT64=yes
else
fi
echo $ac_n "checking for unsigned char""... $ac_c" 1>&6
-echo "configure:9156: checking for unsigned char" >&5
+echo "configure:8691: checking for unsigned char" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_UNSIGNED_CHAR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_UNSIGNED_CHAR=cross
else
cat > conftest.$ac_ext <<EOF
-#line 9165 "configure"
+#line 8700 "configure"
#include "confdefs.h"
#include <stdio.h>
main() { char c; c=250; exit((c > 0)?0:1); }
EOF
-if { (eval echo configure:9170: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8705: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_UNSIGNED_CHAR=yes
else
fi
echo $ac_n "checking for sin_len in sock""... $ac_c" 1>&6
-echo "configure:9193: checking for sin_len in sock" >&5
+echo "configure:8728: checking for sin_len in sock" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_SOCK_SIN_LEN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9199 "configure"
+#line 8734 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/socket.h>
struct sockaddr_in sock; sock.sin_len = sizeof(sock);
; return 0; }
EOF
-if { (eval echo configure:9208: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8743: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_SOCK_SIN_LEN=yes
else
fi
echo $ac_n "checking whether seekdir returns void""... $ac_c" 1>&6
-echo "configure:9229: checking whether seekdir returns void" >&5
+echo "configure:8764: checking whether seekdir returns void" >&5
if eval "test \"`echo '$''{'samba_cv_SEEKDIR_RETURNS_VOID'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9235 "configure"
+#line 8770 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <dirent.h>
return 0;
; return 0; }
EOF
-if { (eval echo configure:9244: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8779: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_SEEKDIR_RETURNS_VOID=yes
else
fi
echo $ac_n "checking for __FILE__ macro""... $ac_c" 1>&6
-echo "configure:9265: checking for __FILE__ macro" >&5
+echo "configure:8800: checking for __FILE__ macro" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_FILE_MACRO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9271 "configure"
+#line 8806 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
printf("%s\n", __FILE__);
; return 0; }
EOF
-if { (eval echo configure:9278: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8813: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_FILE_MACRO=yes
else
fi
echo $ac_n "checking for __FUNCTION__ macro""... $ac_c" 1>&6
-echo "configure:9299: checking for __FUNCTION__ macro" >&5
+echo "configure:8834: checking for __FUNCTION__ macro" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_FUNCTION_MACRO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9305 "configure"
+#line 8840 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
printf("%s\n", __FUNCTION__);
; return 0; }
EOF
-if { (eval echo configure:9312: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8847: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_FUNCTION_MACRO=yes
else
fi
echo $ac_n "checking if gettimeofday takes tz argument""... $ac_c" 1>&6
-echo "configure:9333: checking if gettimeofday takes tz argument" >&5
+echo "configure:8868: checking if gettimeofday takes tz argument" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_GETTIMEOFDAY_TZ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_GETTIMEOFDAY_TZ=cross
else
cat > conftest.$ac_ext <<EOF
-#line 9342 "configure"
+#line 8877 "configure"
#include "confdefs.h"
#include <sys/time.h>
#include <unistd.h>
main() { struct timeval tv; exit(gettimeofday(&tv, NULL));}
EOF
-if { (eval echo configure:9349: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8884: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_GETTIMEOFDAY_TZ=yes
else
fi
echo $ac_n "checking for C99 vsnprintf""... $ac_c" 1>&6
-echo "configure:9372: checking for C99 vsnprintf" >&5
+echo "configure:8907: checking for C99 vsnprintf" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_C99_VSNPRINTF'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_C99_VSNPRINTF=cross
else
cat > conftest.$ac_ext <<EOF
-#line 9381 "configure"
+#line 8916 "configure"
#include "confdefs.h"
#include <sys/types.h>
main() { foo("hello"); }
EOF
-if { (eval echo configure:9403: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8938: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_C99_VSNPRINTF=yes
else
fi
echo $ac_n "checking for broken readdir""... $ac_c" 1>&6
-echo "configure:9426: checking for broken readdir" >&5
+echo "configure:8961: checking for broken readdir" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_BROKEN_READDIR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_BROKEN_READDIR=cross
else
cat > conftest.$ac_ext <<EOF
-#line 9435 "configure"
+#line 8970 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <dirent.h>
if (di && di->d_name[-2] == '.' && di->d_name[-1] == 0 &&
di->d_name[0] == 0) exit(0); exit(1);}
EOF
-if { (eval echo configure:9443: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8978: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_BROKEN_READDIR=yes
else
fi
echo $ac_n "checking for utimbuf""... $ac_c" 1>&6
-echo "configure:9466: checking for utimbuf" >&5
+echo "configure:9001: checking for utimbuf" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_UTIMBUF'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9472 "configure"
+#line 9007 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <utime.h>
struct utimbuf tbuf; tbuf.actime = 0; tbuf.modtime = 1; exit(utime("foo.c",&tbuf));
; return 0; }
EOF
-if { (eval echo configure:9480: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9015: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_UTIMBUF=yes
else
for ac_func in pututline pututxline updwtmp updwtmpx getutmpx
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:9504: checking for $ac_func" >&5
+echo "configure:9039: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9509 "configure"
+#line 9044 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:9532: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9067: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for ut_name in utmp""... $ac_c" 1>&6
-echo "configure:9558: checking for ut_name in utmp" >&5
+echo "configure:9093: checking for ut_name in utmp" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_UT_UT_NAME'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9564 "configure"
+#line 9099 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <utmp.h>
struct utmp ut; ut.ut_name[0] = 'a';
; return 0; }
EOF
-if { (eval echo configure:9572: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9107: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_UT_UT_NAME=yes
else
fi
echo $ac_n "checking for ut_user in utmp""... $ac_c" 1>&6
-echo "configure:9593: checking for ut_user in utmp" >&5
+echo "configure:9128: checking for ut_user in utmp" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_UT_UT_USER'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9599 "configure"
+#line 9134 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <utmp.h>
struct utmp ut; ut.ut_user[0] = 'a';
; return 0; }
EOF
-if { (eval echo configure:9607: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9142: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_UT_UT_USER=yes
else
fi
echo $ac_n "checking for ut_id in utmp""... $ac_c" 1>&6
-echo "configure:9628: checking for ut_id in utmp" >&5
+echo "configure:9163: checking for ut_id in utmp" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_UT_UT_ID'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9634 "configure"
+#line 9169 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <utmp.h>
struct utmp ut; ut.ut_id[0] = 'a';
; return 0; }
EOF
-if { (eval echo configure:9642: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9177: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_UT_UT_ID=yes
else
fi
echo $ac_n "checking for ut_host in utmp""... $ac_c" 1>&6
-echo "configure:9663: checking for ut_host in utmp" >&5
+echo "configure:9198: checking for ut_host in utmp" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_UT_UT_HOST'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9669 "configure"
+#line 9204 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <utmp.h>
struct utmp ut; ut.ut_host[0] = 'a';
; return 0; }
EOF
-if { (eval echo configure:9677: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9212: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_UT_UT_HOST=yes
else
fi
echo $ac_n "checking for ut_time in utmp""... $ac_c" 1>&6
-echo "configure:9698: checking for ut_time in utmp" >&5
+echo "configure:9233: checking for ut_time in utmp" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_UT_UT_TIME'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9704 "configure"
+#line 9239 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <utmp.h>
struct utmp ut; time_t t; ut.ut_time = t;
; return 0; }
EOF
-if { (eval echo configure:9712: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9247: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_UT_UT_TIME=yes
else
fi
echo $ac_n "checking for ut_tv in utmp""... $ac_c" 1>&6
-echo "configure:9733: checking for ut_tv in utmp" >&5
+echo "configure:9268: checking for ut_tv in utmp" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_UT_UT_TV'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9739 "configure"
+#line 9274 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <utmp.h>
struct utmp ut; struct timeval tv; ut.ut_tv = tv;
; return 0; }
EOF
-if { (eval echo configure:9747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9282: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_UT_UT_TV=yes
else
fi
echo $ac_n "checking for ut_type in utmp""... $ac_c" 1>&6
-echo "configure:9768: checking for ut_type in utmp" >&5
+echo "configure:9303: checking for ut_type in utmp" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_UT_UT_TYPE'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9774 "configure"
+#line 9309 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <utmp.h>
struct utmp ut; ut.ut_type = 0;
; return 0; }
EOF
-if { (eval echo configure:9782: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9317: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_UT_UT_TYPE=yes
else
fi
echo $ac_n "checking for ut_pid in utmp""... $ac_c" 1>&6
-echo "configure:9803: checking for ut_pid in utmp" >&5
+echo "configure:9338: checking for ut_pid in utmp" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_UT_UT_PID'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9809 "configure"
+#line 9344 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <utmp.h>
struct utmp ut; ut.ut_pid = 0;
; return 0; }
EOF
-if { (eval echo configure:9817: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9352: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_UT_UT_PID=yes
else
fi
echo $ac_n "checking for ut_exit in utmp""... $ac_c" 1>&6
-echo "configure:9838: checking for ut_exit in utmp" >&5
+echo "configure:9373: checking for ut_exit in utmp" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_UT_UT_EXIT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9844 "configure"
+#line 9379 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <utmp.h>
struct utmp ut; ut.ut_exit.e_exit = 0;
; return 0; }
EOF
-if { (eval echo configure:9852: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9387: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_UT_UT_EXIT=yes
else
fi
echo $ac_n "checking for ut_addr in utmp""... $ac_c" 1>&6
-echo "configure:9873: checking for ut_addr in utmp" >&5
+echo "configure:9408: checking for ut_addr in utmp" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_UT_UT_ADDR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9879 "configure"
+#line 9414 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <utmp.h>
struct utmp ut; ut.ut_addr = 0;
; return 0; }
EOF
-if { (eval echo configure:9887: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9422: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_UT_UT_ADDR=yes
else
if test x$ac_cv_func_pututline = xyes ; then
echo $ac_n "checking whether pututline returns pointer""... $ac_c" 1>&6
-echo "configure:9909: checking whether pututline returns pointer" >&5
+echo "configure:9444: checking whether pututline returns pointer" >&5
if eval "test \"`echo '$''{'samba_cv_PUTUTLINE_RETURNS_UTMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9915 "configure"
+#line 9450 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <utmp.h>
struct utmp utarg; struct utmp *utreturn; utreturn = pututline(&utarg);
; return 0; }
EOF
-if { (eval echo configure:9923: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9458: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_PUTUTLINE_RETURNS_UTMP=yes
else
fi
echo $ac_n "checking for ut_syslen in utmpx""... $ac_c" 1>&6
-echo "configure:9945: checking for ut_syslen in utmpx" >&5
+echo "configure:9480: checking for ut_syslen in utmpx" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_UX_UT_SYSLEN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9951 "configure"
+#line 9486 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <utmpx.h>
struct utmpx ux; ux.ut_syslen = 0;
; return 0; }
EOF
-if { (eval echo configure:9959: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9494: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_UX_UT_SYSLEN=yes
else
############
# check for iconv in libc, and if not then we build our own
echo $ac_n "checking for working iconv""... $ac_c" 1>&6
-echo "configure:9982: checking for working iconv" >&5
+echo "configure:9517: checking for working iconv" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_NATIVE_ICONV'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_NATIVE_ICONV=cross
else
cat > conftest.$ac_ext <<EOF
-#line 9991 "configure"
+#line 9526 "configure"
#include "confdefs.h"
#include <iconv.h>
}
EOF
-if { (eval echo configure:10002: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:9537: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_NATIVE_ICONV=yes
else
#define HAVE_NATIVE_ICONV 1
EOF
- ICONV_OBJS=""
-else
- ICONV_OBJS="iconv/iconv.o"
fi
-
echo $ac_n "checking for Linux kernel oplocks""... $ac_c" 1>&6
-echo "configure:10030: checking for Linux kernel oplocks" >&5
+echo "configure:9561: checking for Linux kernel oplocks" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_KERNEL_OPLOCKS_LINUX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10039 "configure"
+#line 9570 "configure"
#include "confdefs.h"
#include <sys/types.h>
}
EOF
-if { (eval echo configure:10053: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:9584: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=yes
else
fi
echo $ac_n "checking for kernel change notify support""... $ac_c" 1>&6
-echo "configure:10076: checking for kernel change notify support" >&5
+echo "configure:9607: checking for kernel change notify support" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_KERNEL_CHANGE_NOTIFY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10085 "configure"
+#line 9616 "configure"
#include "confdefs.h"
#include <sys/types.h>
}
EOF
-if { (eval echo configure:10099: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:9630: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=yes
else
fi
echo $ac_n "checking for kernel share modes""... $ac_c" 1>&6
-echo "configure:10122: checking for kernel share modes" >&5
+echo "configure:9653: checking for kernel share modes" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_KERNEL_SHARE_MODES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_KERNEL_SHARE_MODES=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10131 "configure"
+#line 9662 "configure"
#include "confdefs.h"
#include <sys/types.h>
}
EOF
-if { (eval echo configure:10147: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:9678: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_KERNEL_SHARE_MODES=yes
else
echo $ac_n "checking for IRIX kernel oplock type definitions""... $ac_c" 1>&6
-echo "configure:10173: checking for IRIX kernel oplock type definitions" >&5
+echo "configure:9704: checking for IRIX kernel oplock type definitions" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_KERNEL_OPLOCKS_IRIX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10179 "configure"
+#line 9710 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <fcntl.h>
oplock_stat_t t; t.os_state = OP_REVOKE; t.os_dev = 1; t.os_ino = 1;
; return 0; }
EOF
-if { (eval echo configure:10187: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9718: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_KERNEL_OPLOCKS_IRIX=yes
else
fi
echo $ac_n "checking for irix specific capabilities""... $ac_c" 1>&6
-echo "configure:10208: checking for irix specific capabilities" >&5
+echo "configure:9739: checking for irix specific capabilities" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_IRIX_SPECIFIC_CAPABILITIES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_IRIX_SPECIFIC_CAPABILITIES=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10217 "configure"
+#line 9748 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/capability.h>
}
EOF
-if { (eval echo configure:10232: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:9763: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_IRIX_SPECIFIC_CAPABILITIES=yes
else
#
echo $ac_n "checking for int16 typedef included by rpc/rpc.h""... $ac_c" 1>&6
-echo "configure:10260: checking for int16 typedef included by rpc/rpc.h" >&5
+echo "configure:9791: checking for int16 typedef included by rpc/rpc.h" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_INT16_FROM_RPC_RPC_H'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10266 "configure"
+#line 9797 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if defined(HAVE_RPC_RPC_H)
int16 testvar;
; return 0; }
EOF
-if { (eval echo configure:10276: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9807: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_INT16_FROM_RPC_RPC_H=yes
else
fi
echo $ac_n "checking for uint16 typedef included by rpc/rpc.h""... $ac_c" 1>&6
-echo "configure:10297: checking for uint16 typedef included by rpc/rpc.h" >&5
+echo "configure:9828: checking for uint16 typedef included by rpc/rpc.h" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_UINT16_FROM_RPC_RPC_H'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10303 "configure"
+#line 9834 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if defined(HAVE_RPC_RPC_H)
uint16 testvar;
; return 0; }
EOF
-if { (eval echo configure:10313: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9844: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_UINT16_FROM_RPC_RPC_H=yes
else
fi
echo $ac_n "checking for int32 typedef included by rpc/rpc.h""... $ac_c" 1>&6
-echo "configure:10334: checking for int32 typedef included by rpc/rpc.h" >&5
+echo "configure:9865: checking for int32 typedef included by rpc/rpc.h" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_INT32_FROM_RPC_RPC_H'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10340 "configure"
+#line 9871 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if defined(HAVE_RPC_RPC_H)
int32 testvar;
; return 0; }
EOF
-if { (eval echo configure:10350: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9881: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_INT32_FROM_RPC_RPC_H=yes
else
fi
echo $ac_n "checking for uint32 typedef included by rpc/rpc.h""... $ac_c" 1>&6
-echo "configure:10371: checking for uint32 typedef included by rpc/rpc.h" >&5
+echo "configure:9902: checking for uint32 typedef included by rpc/rpc.h" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_UINT32_FROM_RPC_RPC_H'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10377 "configure"
+#line 9908 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if defined(HAVE_RPC_RPC_H)
uint32 testvar;
; return 0; }
EOF
-if { (eval echo configure:10387: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9918: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_UINT32_FROM_RPC_RPC_H=yes
else
echo $ac_n "checking for conflicting AUTH_ERROR define in rpc/rpc.h""... $ac_c" 1>&6
-echo "configure:10409: checking for conflicting AUTH_ERROR define in rpc/rpc.h" >&5
+echo "configure:9940: checking for conflicting AUTH_ERROR define in rpc/rpc.h" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_RPC_AUTH_ERROR_CONFLICT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10415 "configure"
+#line 9946 "configure"
#include "confdefs.h"
#include <sys/types.h>
#ifdef HAVE_SYS_SECURITY_H
int testvar;
; return 0; }
EOF
-if { (eval echo configure:10429: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9960: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_RPC_AUTH_ERROR_CONFLICT=no
else
fi
echo $ac_n "checking for test routines""... $ac_c" 1>&6
-echo "configure:10450: checking for test routines" >&5
+echo "configure:9981: checking for test routines" >&5
if test "$cross_compiling" = yes; then
echo "configure: warning: cannot run when cross-compiling" 1>&2
else
cat > conftest.$ac_ext <<EOF
-#line 10455 "configure"
+#line 9986 "configure"
#include "confdefs.h"
#include "${srcdir-.}/tests/trivial.c"
EOF
-if { (eval echo configure:10459: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:9990: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
echo "$ac_t""yes" 1>&6
else
echo $ac_n "checking for ftruncate extend""... $ac_c" 1>&6
-echo "configure:10473: checking for ftruncate extend" >&5
+echo "configure:10004: checking for ftruncate extend" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_FTRUNCATE_EXTEND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_FTRUNCATE_EXTEND=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10482 "configure"
+#line 10013 "configure"
#include "confdefs.h"
#include "${srcdir-.}/tests/ftruncate.c"
EOF
-if { (eval echo configure:10486: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10017: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_FTRUNCATE_EXTEND=yes
else
fi
echo $ac_n "checking for AF_LOCAL socket support""... $ac_c" 1>&6
-echo "configure:10509: checking for AF_LOCAL socket support" >&5
+echo "configure:10040: checking for AF_LOCAL socket support" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_WORKING_AF_LOCAL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_WORKING_AF_LOCAL=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10518 "configure"
+#line 10049 "configure"
#include "confdefs.h"
#include "${srcdir-.}/tests/unixsock.c"
EOF
-if { (eval echo configure:10522: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10053: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_WORKING_AF_LOCAL=yes
else
fi
echo $ac_n "checking for broken getgroups""... $ac_c" 1>&6
-echo "configure:10546: checking for broken getgroups" >&5
+echo "configure:10077: checking for broken getgroups" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_BROKEN_GETGROUPS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_BROKEN_GETGROUPS=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10555 "configure"
+#line 10086 "configure"
#include "confdefs.h"
#include "${srcdir-.}/tests/getgroups.c"
EOF
-if { (eval echo configure:10559: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10090: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_BROKEN_GETGROUPS=yes
else
fi
echo $ac_n "checking whether getpass should be replaced""... $ac_c" 1>&6
-echo "configure:10582: checking whether getpass should be replaced" >&5
+echo "configure:10113: checking whether getpass should be replaced" >&5
if eval "test \"`echo '$''{'samba_cv_REPLACE_GETPASS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
SAVE_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS -I${srcdir-.}/ -I${srcdir-.}/include -I${srcdir-.}/ubiqx -I${srcdir-.}/smbwrapper"
cat > conftest.$ac_ext <<EOF
-#line 10590 "configure"
+#line 10121 "configure"
#include "confdefs.h"
#define REPLACE_GETPASS 1
; return 0; }
EOF
-if { (eval echo configure:10603: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10134: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_REPLACE_GETPASS=yes
else
fi
echo $ac_n "checking for broken inet_ntoa""... $ac_c" 1>&6
-echo "configure:10626: checking for broken inet_ntoa" >&5
+echo "configure:10157: checking for broken inet_ntoa" >&5
if eval "test \"`echo '$''{'samba_cv_REPLACE_INET_NTOA'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_REPLACE_INET_NTOA=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10635 "configure"
+#line 10166 "configure"
#include "confdefs.h"
#include <stdio.h>
strcmp(inet_ntoa(ip),"120.86.52.18")) { exit(0); }
exit(1);}
EOF
-if { (eval echo configure:10649: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10180: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_REPLACE_INET_NTOA=yes
else
fi
echo $ac_n "checking for secure mkstemp""... $ac_c" 1>&6
-echo "configure:10672: checking for secure mkstemp" >&5
+echo "configure:10203: checking for secure mkstemp" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_SECURE_MKSTEMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_SECURE_MKSTEMP=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10681 "configure"
+#line 10212 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <sys/types.h>
exit(0);
}
EOF
-if { (eval echo configure:10698: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10229: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_SECURE_MKSTEMP=yes
else
fi
echo $ac_n "checking for sysconf(_SC_NGROUPS_MAX)""... $ac_c" 1>&6
-echo "configure:10721: checking for sysconf(_SC_NGROUPS_MAX)" >&5
+echo "configure:10252: checking for sysconf(_SC_NGROUPS_MAX)" >&5
if eval "test \"`echo '$''{'samba_cv_SYSCONF_SC_NGROUPS_MAX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_SYSCONF_SC_NGROUPS_MAX=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10730 "configure"
+#line 10261 "configure"
#include "confdefs.h"
#include <unistd.h>
main() { exit(sysconf(_SC_NGROUPS_MAX) == -1 ? 1 : 0); }
EOF
-if { (eval echo configure:10735: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10266: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_SYSCONF_SC_NGROUPS_MAX=yes
else
fi
echo $ac_n "checking for root""... $ac_c" 1>&6
-echo "configure:10758: checking for root" >&5
+echo "configure:10289: checking for root" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_ROOT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_ROOT=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10767 "configure"
+#line 10298 "configure"
#include "confdefs.h"
main() { exit(getuid() != 0); }
EOF
-if { (eval echo configure:10771: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_ROOT=yes
else
# look for a method of finding the list of network interfaces
iface=no;
echo $ac_n "checking for iface AIX""... $ac_c" 1>&6
-echo "configure:10799: checking for iface AIX" >&5
+echo "configure:10330: checking for iface AIX" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_IFACE_AIX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_IFACE_AIX=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10808 "configure"
+#line 10339 "configure"
#include "confdefs.h"
#define HAVE_IFACE_AIX 1
#include "confdefs.h"
#include "${srcdir-.}/lib/interfaces.c"
EOF
-if { (eval echo configure:10816: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10347: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_IFACE_AIX=yes
else
if test $iface = no; then
echo $ac_n "checking for iface ifconf""... $ac_c" 1>&6
-echo "configure:10840: checking for iface ifconf" >&5
+echo "configure:10371: checking for iface ifconf" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_IFACE_IFCONF'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_IFACE_IFCONF=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10849 "configure"
+#line 10380 "configure"
#include "confdefs.h"
#define HAVE_IFACE_IFCONF 1
#include "confdefs.h"
#include "${srcdir-.}/lib/interfaces.c"
EOF
-if { (eval echo configure:10857: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10388: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_IFACE_IFCONF=yes
else
if test $iface = no; then
echo $ac_n "checking for iface ifreq""... $ac_c" 1>&6
-echo "configure:10882: checking for iface ifreq" >&5
+echo "configure:10413: checking for iface ifreq" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_IFACE_IFREQ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_IFACE_IFREQ=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10891 "configure"
+#line 10422 "configure"
#include "confdefs.h"
#define HAVE_IFACE_IFREQ 1
#include "confdefs.h"
#include "${srcdir-.}/lib/interfaces.c"
EOF
-if { (eval echo configure:10899: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_IFACE_IFREQ=yes
else
seteuid=no;
if test $seteuid = no; then
echo $ac_n "checking for setresuid""... $ac_c" 1>&6
-echo "configure:10928: checking for setresuid" >&5
+echo "configure:10459: checking for setresuid" >&5
if eval "test \"`echo '$''{'samba_cv_USE_SETRESUID'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_USE_SETRESUID=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10937 "configure"
+#line 10468 "configure"
#include "confdefs.h"
#define AUTOCONF_TEST 1
#include "confdefs.h"
#include "${srcdir-.}/lib/util_sec.c"
EOF
-if { (eval echo configure:10945: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_USE_SETRESUID=yes
else
if test $seteuid = no; then
echo $ac_n "checking for setreuid""... $ac_c" 1>&6
-echo "configure:10971: checking for setreuid" >&5
+echo "configure:10502: checking for setreuid" >&5
if eval "test \"`echo '$''{'samba_cv_USE_SETREUID'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_USE_SETREUID=cross
else
cat > conftest.$ac_ext <<EOF
-#line 10980 "configure"
+#line 10511 "configure"
#include "confdefs.h"
#define AUTOCONF_TEST 1
#include "confdefs.h"
#include "${srcdir-.}/lib/util_sec.c"
EOF
-if { (eval echo configure:10988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10519: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_USE_SETREUID=yes
else
if test $seteuid = no; then
echo $ac_n "checking for seteuid""... $ac_c" 1>&6
-echo "configure:11013: checking for seteuid" >&5
+echo "configure:10544: checking for seteuid" >&5
if eval "test \"`echo '$''{'samba_cv_USE_SETEUID'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_USE_SETEUID=cross
else
cat > conftest.$ac_ext <<EOF
-#line 11022 "configure"
+#line 10553 "configure"
#include "confdefs.h"
#define AUTOCONF_TEST 1
#include "confdefs.h"
#include "${srcdir-.}/lib/util_sec.c"
EOF
-if { (eval echo configure:11030: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10561: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_USE_SETEUID=yes
else
if test $seteuid = no; then
echo $ac_n "checking for setuidx""... $ac_c" 1>&6
-echo "configure:11055: checking for setuidx" >&5
+echo "configure:10586: checking for setuidx" >&5
if eval "test \"`echo '$''{'samba_cv_USE_SETUIDX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_USE_SETUIDX=cross
else
cat > conftest.$ac_ext <<EOF
-#line 11064 "configure"
+#line 10595 "configure"
#include "confdefs.h"
#define AUTOCONF_TEST 1
#include "confdefs.h"
#include "${srcdir-.}/lib/util_sec.c"
EOF
-if { (eval echo configure:11072: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10603: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_USE_SETUIDX=yes
else
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:11097: checking for working mmap" >&5
+echo "configure:10628: checking for working mmap" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_MMAP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_MMAP=cross
else
cat > conftest.$ac_ext <<EOF
-#line 11106 "configure"
+#line 10637 "configure"
#include "confdefs.h"
#include "${srcdir-.}/tests/shared_mmap.c"
EOF
-if { (eval echo configure:11110: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10641: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_MMAP=yes
else
fi
echo $ac_n "checking for ftruncate needs root""... $ac_c" 1>&6
-echo "configure:11133: checking for ftruncate needs root" >&5
+echo "configure:10664: checking for ftruncate needs root" >&5
if eval "test \"`echo '$''{'samba_cv_FTRUNCATE_NEEDS_ROOT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_FTRUNCATE_NEEDS_ROOT=cross
else
cat > conftest.$ac_ext <<EOF
-#line 11142 "configure"
+#line 10673 "configure"
#include "confdefs.h"
#include "${srcdir-.}/tests/ftruncroot.c"
EOF
-if { (eval echo configure:11146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10677: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_FTRUNCATE_NEEDS_ROOT=yes
else
fi
echo $ac_n "checking for fcntl locking""... $ac_c" 1>&6
-echo "configure:11169: checking for fcntl locking" >&5
+echo "configure:10700: checking for fcntl locking" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_FCNTL_LOCK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_FCNTL_LOCK=cross
else
cat > conftest.$ac_ext <<EOF
-#line 11178 "configure"
+#line 10709 "configure"
#include "confdefs.h"
#include "${srcdir-.}/tests/fcntl_lock.c"
EOF
-if { (eval echo configure:11182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10713: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_FCNTL_LOCK=yes
else
fi
echo $ac_n "checking for broken (glibc2.1/x86) 64 bit fcntl locking""... $ac_c" 1>&6
-echo "configure:11205: checking for broken (glibc2.1/x86) 64 bit fcntl locking" >&5
+echo "configure:10736: checking for broken (glibc2.1/x86) 64 bit fcntl locking" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_BROKEN_FCNTL64_LOCKS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_BROKEN_FCNTL64_LOCKS=cross
else
cat > conftest.$ac_ext <<EOF
-#line 11214 "configure"
+#line 10745 "configure"
#include "confdefs.h"
#include "${srcdir-.}/tests/fcntl_lock64.c"
EOF
-if { (eval echo configure:11218: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10749: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_BROKEN_FCNTL64_LOCKS=yes
else
echo $ac_n "checking for 64 bit fcntl locking""... $ac_c" 1>&6
-echo "configure:11243: checking for 64 bit fcntl locking" >&5
+echo "configure:10774: checking for 64 bit fcntl locking" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_STRUCT_FLOCK64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_STRUCT_FLOCK64=cross
else
cat > conftest.$ac_ext <<EOF
-#line 11252 "configure"
+#line 10783 "configure"
#include "confdefs.h"
#if defined(HAVE_UNISTD_H)
#endif
}
EOF
-if { (eval echo configure:11276: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_STRUCT_FLOCK64=yes
else
fi
echo $ac_n "checking for a crypt that needs truncated salt""... $ac_c" 1>&6
-echo "configure:11301: checking for a crypt that needs truncated salt" >&5
+echo "configure:10832: checking for a crypt that needs truncated salt" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_TRUNCATED_SALT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
samba_cv_HAVE_TRUNCATED_SALT=cross
else
cat > conftest.$ac_ext <<EOF
-#line 11310 "configure"
+#line 10841 "configure"
#include "confdefs.h"
#include "${srcdir-.}/tests/crypttest.c"
EOF
-if { (eval echo configure:11314: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10845: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
samba_cv_HAVE_TRUNCATED_SALT=no
else
fi
echo $ac_n "checking for broken nisplus include files""... $ac_c" 1>&6
-echo "configure:11337: checking for broken nisplus include files" >&5
+echo "configure:10868: checking for broken nisplus include files" >&5
if eval "test \"`echo '$''{'samba_cv_BROKEN_NISPLUS_INCLUDE_FILES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11343 "configure"
+#line 10874 "configure"
#include "confdefs.h"
#include <sys/acl.h>
#if defined(HAVE_RPCSVC_NIS_H)
return 0;
; return 0; }
EOF
-if { (eval echo configure:11353: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10884: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_BROKEN_NISPLUS_INCLUDE_FILES=no
else
#################################################
# check for smbwrapper support
echo $ac_n "checking whether to use smbwrapper""... $ac_c" 1>&6
-echo "configure:11377: checking whether to use smbwrapper" >&5
+echo "configure:10908: checking whether to use smbwrapper" >&5
# Check whether --with-smbwrapper or --without-smbwrapper was given.
if test "${with_smbwrapper+set}" = set; then
withval="$with_smbwrapper"
#################################################
# check for the AFS filesystem
echo $ac_n "checking whether to use AFS""... $ac_c" 1>&6
-echo "configure:11421: checking whether to use AFS" >&5
+echo "configure:10952: checking whether to use AFS" >&5
# Check whether --with-afs or --without-afs was given.
if test "${with_afs+set}" = set; then
withval="$with_afs"
#################################################
# check for the DFS auth system
echo $ac_n "checking whether to use DFS auth""... $ac_c" 1>&6
-echo "configure:11447: checking whether to use DFS auth" >&5
+echo "configure:10978: checking whether to use DFS auth" >&5
# Check whether --with-dfs or --without-dfs was given.
if test "${with_dfs+set}" = set; then
withval="$with_dfs"
#################################################
# check for Kerberos IV auth system
echo $ac_n "checking whether to use Kerberos IV""... $ac_c" 1>&6
-echo "configure:11472: checking whether to use Kerberos IV" >&5
+echo "configure:11003: checking whether to use Kerberos IV" >&5
# Check whether --with-krb4 or --without-krb4 was given.
if test "${with_krb4+set}" = set; then
withval="$with_krb4"
EOF
echo $ac_n "checking for dn_expand in -lresolv""... $ac_c" 1>&6
-echo "configure:11482: checking for dn_expand in -lresolv" >&5
+echo "configure:11013: checking for dn_expand in -lresolv" >&5
ac_lib_var=`echo resolv'_'dn_expand | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11490 "configure"
+#line 11021 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dn_expand()
; return 0; }
EOF
-if { (eval echo configure:11501: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11032: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
#################################################
# check for Kerberos 5 auth system
echo $ac_n "checking whether to use Kerberos 5""... $ac_c" 1>&6
-echo "configure:11540: checking whether to use Kerberos 5" >&5
+echo "configure:11071: checking whether to use Kerberos 5" >&5
# Check whether --with-krb5 or --without-krb5 was given.
if test "${with_krb5+set}" = set; then
withval="$with_krb5"
#################################################
# check for automount support
echo $ac_n "checking whether to use AUTOMOUNT""... $ac_c" 1>&6
-echo "configure:11561: checking whether to use AUTOMOUNT" >&5
+echo "configure:11092: checking whether to use AUTOMOUNT" >&5
# Check whether --with-automount or --without-automount was given.
if test "${with_automount+set}" = set; then
withval="$with_automount"
#################################################
# check for smbmount support
echo $ac_n "checking whether to use SMBMOUNT""... $ac_c" 1>&6
-echo "configure:11586: checking whether to use SMBMOUNT" >&5
+echo "configure:11117: checking whether to use SMBMOUNT" >&5
# Check whether --with-smbmount or --without-smbmount was given.
if test "${with_smbmount+set}" = set; then
withval="$with_smbmount"
# check for a PAM password database
echo $ac_n "checking whether to use PAM password database""... $ac_c" 1>&6
-echo "configure:11616: checking whether to use PAM password database" >&5
+echo "configure:11147: checking whether to use PAM password database" >&5
# Check whether --with-pam or --without-pam was given.
if test "${with_pam+set}" = set; then
withval="$with_pam"
# we can't build a pam module if we don't have pam.
echo $ac_n "checking for pam_get_data in -lpam""... $ac_c" 1>&6
-echo "configure:11641: checking for pam_get_data in -lpam" >&5
+echo "configure:11172: checking for pam_get_data in -lpam" >&5
ac_lib_var=`echo pam'_'pam_get_data | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpam $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11649 "configure"
+#line 11180 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pam_get_data()
; return 0; }
EOF
-if { (eval echo configure:11660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11191: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
#################################################
# check for pam_smbpass support
echo $ac_n "checking whether to use pam_smbpass""... $ac_c" 1>&6
-echo "configure:11687: checking whether to use pam_smbpass" >&5
+echo "configure:11218: checking whether to use pam_smbpass" >&5
# Check whether --with-pam_smbpass or --without-pam_smbpass was given.
if test "${with_pam_smbpass+set}" = set; then
withval="$with_pam_smbpass"
for ac_func in crypt
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:11729: checking for $ac_func" >&5
+echo "configure:11260: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11734 "configure"
+#line 11265 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:11757: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11288: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test x"$ac_cv_func_crypt" = x"no"; then
echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
-echo "configure:11783: checking for crypt in -lcrypt" >&5
+echo "configure:11314: checking for crypt in -lcrypt" >&5
ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcrypt $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11791 "configure"
+#line 11322 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
crypt()
; return 0; }
EOF
-if { (eval echo configure:11802: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11333: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
#################################################
# check for a TDB password database
echo $ac_n "checking whether to use TDB password database""... $ac_c" 1>&6
-echo "configure:11833: checking whether to use TDB password database" >&5
+echo "configure:11364: checking whether to use TDB password database" >&5
# Check whether --with-tdbsam or --without-tdbsam was given.
if test "${with_tdbsam+set}" = set; then
withval="$with_tdbsam"
#################################################
# check for a LDAP password database
echo $ac_n "checking whether to use LDAP password database""... $ac_c" 1>&6
-echo "configure:11859: checking whether to use LDAP password database" >&5
+echo "configure:11390: checking whether to use LDAP password database" >&5
# Check whether --with-ldap or --without-ldap was given.
if test "${with_ldap+set}" = set; then
withval="$with_ldap"
#################################################
# check for a NISPLUS password database
echo $ac_n "checking whether to use NISPLUS password database""... $ac_c" 1>&6
-echo "configure:11885: checking whether to use NISPLUS password database" >&5
+echo "configure:11416: checking whether to use NISPLUS password database" >&5
# Check whether --with-nisplus or --without-nisplus was given.
if test "${with_nisplus+set}" = set; then
withval="$with_nisplus"
#################################################
# check for a NISPLUS_HOME support
echo $ac_n "checking whether to use NISPLUS_HOME""... $ac_c" 1>&6
-echo "configure:11910: checking whether to use NISPLUS_HOME" >&5
+echo "configure:11441: checking whether to use NISPLUS_HOME" >&5
# Check whether --with-nisplus-home or --without-nisplus-home was given.
if test "${with_nisplus_home+set}" = set; then
withval="$with_nisplus_home"
#################################################
# check for the secure socket layer
echo $ac_n "checking whether to use SSL""... $ac_c" 1>&6
-echo "configure:11935: checking whether to use SSL" >&5
+echo "configure:11466: checking whether to use SSL" >&5
# Check whether --with-ssl or --without-ssl was given.
if test "${with_ssl+set}" = set; then
withval="$with_ssl"
#################################################
# check for syslog logging
echo $ac_n "checking whether to use syslog logging""... $ac_c" 1>&6
-echo "configure:11994: checking whether to use syslog logging" >&5
+echo "configure:11525: checking whether to use syslog logging" >&5
# Check whether --with-syslog or --without-syslog was given.
if test "${with_syslog+set}" = set; then
withval="$with_syslog"
#################################################
# check for a shared memory profiling support
echo $ac_n "checking whether to use profiling""... $ac_c" 1>&6
-echo "configure:12019: checking whether to use profiling" >&5
+echo "configure:11550: checking whether to use profiling" >&5
# Check whether --with-profile or --without-profile was given.
if test "${with_profile+set}" = set; then
withval="$with_profile"
#################################################
# check for experimental netatalk resource fork support
echo $ac_n "checking whether to support netatalk""... $ac_c" 1>&6
-echo "configure:12045: checking whether to support netatalk" >&5
+echo "configure:11576: checking whether to support netatalk" >&5
# Check whether --with-netatalk or --without-netatalk was given.
if test "${with_netatalk+set}" = set; then
withval="$with_netatalk"
QUOTAOBJS=smbd/noquotas.o
echo $ac_n "checking whether to support disk-quotas""... $ac_c" 1>&6
-echo "configure:12072: checking whether to support disk-quotas" >&5
+echo "configure:11603: checking whether to support disk-quotas" >&5
# Check whether --with-quotas or --without-quotas was given.
if test "${with_quotas+set}" = set; then
withval="$with_quotas"
# check for experimental utmp accounting
echo $ac_n "checking whether to support utmp accounting""... $ac_c" 1>&6
-echo "configure:12096: checking whether to support utmp accounting" >&5
+echo "configure:11627: checking whether to support utmp accounting" >&5
# Check whether --with-utmp or --without-utmp was given.
if test "${with_utmp+set}" = set; then
withval="$with_utmp"
# check for MS Dfs support
echo $ac_n "checking whether to support Microsoft Dfs""... $ac_c" 1>&6
-echo "configure:12122: checking whether to support Microsoft Dfs" >&5
+echo "configure:11653: checking whether to support Microsoft Dfs" >&5
# Check whether --with-msdfs or --without-msdfs was given.
if test "${with_msdfs+set}" = set; then
withval="$with_msdfs"
#################################################
# these tests are taken from the GNU fileutils package
echo "checking how to get filesystem space usage" 1>&6
-echo "configure:12222: checking how to get filesystem space usage" >&5
+echo "configure:11753: checking how to get filesystem space usage" >&5
space=no
# Test for statvfs64.
if test $space = no; then
# SVR4
echo $ac_n "checking statvfs64 function (SVR4)""... $ac_c" 1>&6
-echo "configure:12229: checking statvfs64 function (SVR4)" >&5
+echo "configure:11760: checking statvfs64 function (SVR4)" >&5
if eval "test \"`echo '$''{'fu_cv_sys_stat_statvfs64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fu_cv_sys_stat_statvfs64=cross
else
cat > conftest.$ac_ext <<EOF
-#line 12237 "configure"
+#line 11768 "configure"
#include "confdefs.h"
#if defined(HAVE_UNISTD_H)
exit (statvfs64 (".", &fsd));
}
EOF
-if { (eval echo configure:12251: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:11782: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
fu_cv_sys_stat_statvfs64=yes
else
if test $space = no; then
# SVR4
echo $ac_n "checking statvfs function (SVR4)""... $ac_c" 1>&6
-echo "configure:12284: checking statvfs function (SVR4)" >&5
+echo "configure:11815: checking statvfs function (SVR4)" >&5
if eval "test \"`echo '$''{'fu_cv_sys_stat_statvfs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12289 "configure"
+#line 11820 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/statvfs.h>
struct statvfs fsd; statvfs (0, &fsd);
; return 0; }
EOF
-if { (eval echo configure:12297: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11828: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
fu_cv_sys_stat_statvfs=yes
else
if test $space = no; then
# DEC Alpha running OSF/1
echo $ac_n "checking for 3-argument statfs function (DEC OSF/1)""... $ac_c" 1>&6
-echo "configure:12322: checking for 3-argument statfs function (DEC OSF/1)" >&5
+echo "configure:11853: checking for 3-argument statfs function (DEC OSF/1)" >&5
if eval "test \"`echo '$''{'fu_cv_sys_stat_statfs3_osf1'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fu_cv_sys_stat_statfs3_osf1=no
else
cat > conftest.$ac_ext <<EOF
-#line 12330 "configure"
+#line 11861 "configure"
#include "confdefs.h"
#include <sys/param.h>
exit (statfs (".", &fsd, sizeof (struct statfs)));
}
EOF
-if { (eval echo configure:12343: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:11874: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
fu_cv_sys_stat_statfs3_osf1=yes
else
if test $space = no; then
# AIX
echo $ac_n "checking for two-argument statfs with statfs.bsize member (AIX, 4.3BSD)""... $ac_c" 1>&6
-echo "configure:12370: checking for two-argument statfs with statfs.bsize member (AIX, 4.3BSD)" >&5
+echo "configure:11901: checking for two-argument statfs with statfs.bsize member (AIX, 4.3BSD)" >&5
if eval "test \"`echo '$''{'fu_cv_sys_stat_statfs2_bsize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fu_cv_sys_stat_statfs2_bsize=no
else
cat > conftest.$ac_ext <<EOF
-#line 12378 "configure"
+#line 11909 "configure"
#include "confdefs.h"
#ifdef HAVE_SYS_PARAM_H
exit (statfs (".", &fsd));
}
EOF
-if { (eval echo configure:12397: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:11928: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
fu_cv_sys_stat_statfs2_bsize=yes
else
if test $space = no; then
# SVR3
echo $ac_n "checking for four-argument statfs (AIX-3.2.5, SVR3)""... $ac_c" 1>&6
-echo "configure:12424: checking for four-argument statfs (AIX-3.2.5, SVR3)" >&5
+echo "configure:11955: checking for four-argument statfs (AIX-3.2.5, SVR3)" >&5
if eval "test \"`echo '$''{'fu_cv_sys_stat_statfs4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fu_cv_sys_stat_statfs4=no
else
cat > conftest.$ac_ext <<EOF
-#line 12432 "configure"
+#line 11963 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/statfs.h>
exit (statfs (".", &fsd, sizeof fsd, 0));
}
EOF
-if { (eval echo configure:12442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:11973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
fu_cv_sys_stat_statfs4=yes
else
if test $space = no; then
# 4.4BSD and NetBSD
echo $ac_n "checking for two-argument statfs with statfs.fsize member (4.4BSD and NetBSD)""... $ac_c" 1>&6
-echo "configure:12469: checking for two-argument statfs with statfs.fsize member (4.4BSD and NetBSD)" >&5
+echo "configure:12000: checking for two-argument statfs with statfs.fsize member (4.4BSD and NetBSD)" >&5
if eval "test \"`echo '$''{'fu_cv_sys_stat_statfs2_fsize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fu_cv_sys_stat_statfs2_fsize=no
else
cat > conftest.$ac_ext <<EOF
-#line 12477 "configure"
+#line 12008 "configure"
#include "confdefs.h"
#include <sys/types.h>
#ifdef HAVE_SYS_PARAM_H
exit (statfs (".", &fsd));
}
EOF
-if { (eval echo configure:12493: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:12024: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
fu_cv_sys_stat_statfs2_fsize=yes
else
if test $space = no; then
# Ultrix
echo $ac_n "checking for two-argument statfs with struct fs_data (Ultrix)""... $ac_c" 1>&6
-echo "configure:12520: checking for two-argument statfs with struct fs_data (Ultrix)" >&5
+echo "configure:12051: checking for two-argument statfs with struct fs_data (Ultrix)" >&5
if eval "test \"`echo '$''{'fu_cv_sys_stat_fs_data'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fu_cv_sys_stat_fs_data=no
else
cat > conftest.$ac_ext <<EOF
-#line 12528 "configure"
+#line 12059 "configure"
#include "confdefs.h"
#include <sys/types.h>
#ifdef HAVE_SYS_PARAM_H
exit (statfs (".", &fsd) != 1);
}
EOF
-if { (eval echo configure:12548: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:12079: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
fu_cv_sys_stat_fs_data=yes
else
# file support.
#
echo $ac_n "checking if large file support can be enabled""... $ac_c" 1>&6
-echo "configure:12581: checking if large file support can be enabled" >&5
+echo "configure:12112: checking if large file support can be enabled" >&5
cat > conftest.$ac_ext <<EOF
-#line 12583 "configure"
+#line 12114 "configure"
#include "confdefs.h"
#if defined(HAVE_LONGLONG) && (defined(HAVE_OFF64_T) || (defined(SIZEOF_OFF_T) && (SIZEOF_OFF_T == 8)))
int i
; return 0; }
EOF
-if { (eval echo configure:12596: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:12127: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
samba_cv_HAVE_EXPLICIT_LARGEFILE_SUPPORT=yes
else
# check for ACL support
echo $ac_n "checking whether to support ACLs""... $ac_c" 1>&6
-echo "configure:12661: checking whether to support ACLs" >&5
+echo "configure:12192: checking whether to support ACLs" >&5
# Check whether --with-acl-support or --without-acl-support was given.
if test "${with_acl_support+set}" = set; then
withval="$with_acl_support"
;;
*)
echo $ac_n "checking for acl_get_file in -lacl""... $ac_c" 1>&6
-echo "configure:12699: checking for acl_get_file in -lacl" >&5
+echo "configure:12230: checking for acl_get_file in -lacl" >&5
ac_lib_var=`echo acl'_'acl_get_file | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lacl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12707 "configure"
+#line 12238 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
acl_get_file()
; return 0; }
EOF
-if { (eval echo configure:12718: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for ACL support""... $ac_c" 1>&6
-echo "configure:12746: checking for ACL support" >&5
+echo "configure:12277: checking for ACL support" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_POSIX_ACLS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12752 "configure"
+#line 12283 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/acl.h>
acl_t acl; int entry_id; acl_entry_t *entry_p; return acl_get_entry( acl, entry_id, entry_p);
; return 0; }
EOF
-if { (eval echo configure:12760: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
samba_cv_HAVE_POSIX_ACLS=yes
else
EOF
echo $ac_n "checking for acl_get_perm_np""... $ac_c" 1>&6
-echo "configure:12780: checking for acl_get_perm_np" >&5
+echo "configure:12311: checking for acl_get_perm_np" >&5
if eval "test \"`echo '$''{'samba_cv_HAVE_ACL_GET_PERM_NP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12786 "configure"
+#line 12317 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/acl.h>
acl_permset_t permset_d; acl_perm_t perm; return acl_get_perm_np( permset_d, perm);
; return 0; }
EOF
-if { (eval echo configure:12794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12325: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
samba_cv_HAVE_ACL_GET_PERM_NP=yes
else
# check whether winbind is supported on this platform
echo $ac_n "checking whether to compile winbind""... $ac_c" 1>&6
-echo "configure:12839: checking whether to compile winbind" >&5
+echo "configure:12370: checking whether to compile winbind" >&5
case "$host_os" in
*linux*|*solaris*)
:
else
cat > conftest.$ac_ext <<EOF
-#line 12885 "configure"
+#line 12416 "configure"
#include "confdefs.h"
#include "${srcdir-.}/tests/summary.c"
EOF
-if { (eval echo configure:12889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:12420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
echo "configure OK";
else
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@AWK@%$AWK%g
+s%@BROKEN_CC@%$BROKEN_CC%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@RANLIB@%$RANLIB%g
-s%@LN_S@%$LN_S%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@LIBTOOL_DEPS@%$LIBTOOL_DEPS%g
-s%@BROKEN_CC@%$BROKEN_CC%g
s%@target@%$target%g
s%@target_alias@%$target_alias%g
s%@target_cpu@%$target_cpu%g
s%@target_vendor@%$target_vendor%g
s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
s%@CPP@%$CPP%g
s%@LIBOBJS@%$LIBOBJS%g
s%@TERMLIBS@%$TERMLIBS%g
s%@TERMLDFLAGS@%$TERMLDFLAGS%g
s%@ROFF@%$ROFF%g
-s%@ICONV_OBJS@%$ICONV_OBJS%g
s%@QUOTAOBJS@%$QUOTAOBJS%g
s%@privatedir@%$privatedir%g
s%@lockdir@%$lockdir%g
AC_PROG_CC
AC_PROG_INSTALL
AC_PROG_AWK
-AC_PROG_LIBTOOL
-AC_SUBST(LIBTOOL_DEPS)
dnl Check if C compiler understands -c and -o at the same time
AC_PROG_CC_C_O
+++ /dev/null
-#! /bin/sh
-
-# ltconfig - Create a system-specific libtool.
-# Copyright (C) 1996-1999 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A lot of this script is taken from autoconf-2.10.
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-echo=echo
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell.
- exec "$SHELL" "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit 0
-fi
-
-# Find the correct PATH separator. Usually this is `:', but
-# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != Xset; then
- UNAME=${UNAME-`uname 2>/dev/null`}
- case X$UNAME in
- *-DOS) PATH_SEPARATOR=';' ;;
- *) PATH_SEPARATOR=':' ;;
- esac
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-if test "X${echo_test_string+set}" != Xset; then
- # find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
- echo_test_string="`eval $cmd`" &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then
- break
- fi
- done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" != 'X\t' ||
- test "X`($echo "$echo_test_string") 2>/dev/null`" != X"$echo_test_string"; then
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
- for dir in $PATH /usr/ucb; do
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$save_ifs"
-
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running ltconfig again with it.
- ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}
- else
- # Try using printf.
- echo='printf "%s\n"'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- test "X`($echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
- # Cool, printf works
- :
- elif test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
- test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
- CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL"
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL $0 --fallback-echo"
- elif test "X`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
- test "X`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
- echo="$CONFIG_SHELL $0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "$0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec "${ORIGINAL_CONFIG_SHELL}" "$0" ${1+"$@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
- fi
- fi
- fi
-fi
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# The name of this program.
-progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
-
-# Constants:
-PROGRAM=ltconfig
-PACKAGE=libtool
-VERSION=1.3.4
-TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)"
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-rm="rm -f"
-
-help="Try \`$progname --help' for more information."
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-enable_shared=yes
-# All known linkers require a `.a' archive for static linking (except M$VC,
-# which needs '.lib').
-enable_static=yes
-enable_fast_install=yes
-enable_dlopen=unknown
-enable_win32_dll=no
-ltmain=
-silent=
-srcdir=
-ac_config_guess=
-ac_config_sub=
-host=
-nonopt=
-ofile="$default_ofile"
-verify_host=yes
-with_gcc=no
-with_gnu_ld=no
-need_locks=yes
-ac_ext=c
-objext=o
-libext=a
-exeext=
-cache_file=
-
-old_AR="$AR"
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-old_CPPFLAGS="$CPPFLAGS"
-old_LDFLAGS="$LDFLAGS"
-old_LD="$LD"
-old_LN_S="$LN_S"
-old_LIBS="$LIBS"
-old_NM="$NM"
-old_RANLIB="$RANLIB"
-old_DLLTOOL="$DLLTOOL"
-old_OBJDUMP="$OBJDUMP"
-old_AS="$AS"
-
-# Parse the command line options.
-args=
-prev=
-for option
-do
- case "$option" in
- -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
- esac
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- eval "$prev=\$option"
- prev=
- continue
- fi
-
- case "$option" in
- --help) cat <<EOM
-Usage: $progname [OPTION]... [HOST [LTMAIN]]
-
-Generate a system-specific libtool script.
-
- --debug enable verbose shell tracing
- --disable-shared do not build shared libraries
- --disable-static do not build static libraries
- --disable-fast-install do not optimize for fast installation
- --enable-dlopen enable dlopen support
- --enable-win32-dll enable building dlls on win32 hosts
- --help display this help and exit
- --no-verify do not verify that HOST is a valid host type
--o, --output=FILE specify the output file [default=$default_ofile]
- --quiet same as \`--silent'
- --silent do not print informational messages
- --srcdir=DIR find \`config.guess' in DIR
- --version output version information and exit
- --with-gcc assume that the GNU C compiler will be used
- --with-gnu-ld assume that the C compiler uses the GNU linker
- --disable-lock disable file locking
- --cache-file=FILE configure cache file
-
-LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program
-that provides basic libtool functionality.
-
-HOST is the canonical host system name [default=guessed].
-EOM
- exit 0
- ;;
-
- --debug)
- echo "$progname: enabling shell trace mode"
- set -x
- ;;
-
- --disable-shared) enable_shared=no ;;
-
- --disable-static) enable_static=no ;;
-
- --disable-fast-install) enable_fast_install=no ;;
-
- --enable-dlopen) enable_dlopen=yes ;;
-
- --enable-win32-dll) enable_win32_dll=yes ;;
-
- --quiet | --silent) silent=yes ;;
-
- --srcdir) prev=srcdir ;;
- --srcdir=*) srcdir="$optarg" ;;
-
- --no-verify) verify_host=no ;;
-
- --output | -o) prev=ofile ;;
- --output=*) ofile="$optarg" ;;
-
- --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;;
-
- --with-gcc) with_gcc=yes ;;
- --with-gnu-ld) with_gnu_ld=yes ;;
-
- --disable-lock) need_locks=no ;;
-
- --cache-file=*) cache_file="$optarg" ;;
-
- -*)
- echo "$progname: unrecognized option \`$option'" 1>&2
- echo "$help" 1>&2
- exit 1
- ;;
-
- *)
- if test -z "$ltmain"; then
- ltmain="$option"
- elif test -z "$host"; then
-# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
-# if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
-# echo "$progname: warning \`$option' is not a valid host type" 1>&2
-# fi
- host="$option"
- else
- echo "$progname: too many arguments" 1>&2
- echo "$help" 1>&2
- exit 1
- fi ;;
- esac
-done
-
-if test -z "$ltmain"; then
- echo "$progname: you must specify a LTMAIN file" 1>&2
- echo "$help" 1>&2
- exit 1
-fi
-
-if test ! -f "$ltmain"; then
- echo "$progname: \`$ltmain' does not exist" 1>&2
- echo "$help" 1>&2
- exit 1
-fi
-
-# Quote any args containing shell metacharacters.
-ltconfig_args=
-for arg
-do
- case "$arg" in
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
- ltconfig_args="$ltconfig_args '$arg'" ;;
- *) ltconfig_args="$ltconfig_args $arg" ;;
- esac
-done
-
-# A relevant subset of AC_INIT.
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 5 compiler messages saved in config.log
-# 6 checking for... messages and results
-if test "$silent" = yes; then
- exec 6>/dev/null
-else
- exec 6>&1
-fi
-exec 5>>./config.log
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi
-if test "X${LANG+set}" = Xset; then LANG=C; export LANG; fi
-
-if test -n "$cache_file" && test -r "$cache_file"; then
- echo "loading cache $cache_file within ltconfig"
- . $cache_file
-fi
-
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
- ac_n= ac_c='
-' ac_t=' '
- else
- ac_n=-n ac_c= ac_t=
- fi
-else
- ac_n= ac_c='\c' ac_t=
-fi
-
-if test -z "$srcdir"; then
- # Assume the source directory is the same one as the path to LTMAIN.
- srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'`
- test "$srcdir" = "$ltmain" && srcdir=.
-fi
-
-trap "$rm conftest*; exit 1" 1 2 15
-if test "$verify_host" = yes; then
- # Check for config.guess and config.sub.
- ac_aux_dir=
- for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/config.guess; then
- ac_aux_dir=$ac_dir
- break
- fi
- done
- if test -z "$ac_aux_dir"; then
- echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
- echo "$help" 1>&2
- exit 1
- fi
- ac_config_guess=$ac_aux_dir/config.guess
- ac_config_sub=$ac_aux_dir/config.sub
-
- # Make sure we can run config.sub.
- if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :
- else
- echo "$progname: cannot run $ac_config_sub" 1>&2
- echo "$help" 1>&2
- exit 1
- fi
-
- echo $ac_n "checking host system type""... $ac_c" 1>&6
-
- host_alias=$host
- case "$host_alias" in
- "")
- if host_alias=`$SHELL $ac_config_guess`; then :
- else
- echo "$progname: cannot guess host type; you must specify one" 1>&2
- echo "$help" 1>&2
- exit 1
- fi ;;
- esac
- host=`$SHELL $ac_config_sub $host_alias`
- echo "$ac_t$host" 1>&6
-
- # Make sure the host verified.
- test -z "$host" && exit 1
-
-elif test -z "$host"; then
- echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
- echo "$help" 1>&2
- exit 1
-else
- host_alias=$host
-fi
-
-# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
-case "$host_os" in
-linux-gnu*) ;;
-linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
-esac
-
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-case "$host_os" in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
- fi
- ;;
-esac
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR cru $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-# Set a sane default for `AR'.
-test -z "$AR" && AR=ar
-
-# Set a sane default for `OBJDUMP'.
-test -z "$OBJDUMP" && OBJDUMP=objdump
-
-# If RANLIB is not set, then run the test.
-if test "${RANLIB+set}" != "set"; then
- result=no
-
- echo $ac_n "checking for ranlib... $ac_c" 1>&6
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/ranlib || test -f $dir/ranlib$ac_exeext; then
- RANLIB="ranlib"
- result="ranlib"
- break
- fi
- done
- IFS="$save_ifs"
-
- echo "$ac_t$result" 1>&6
-fi
-
-if test -n "$RANLIB"; then
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-fi
-
-# Set sane defaults for `DLLTOOL', `OBJDUMP', and `AS', used on cygwin.
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$AS" && AS=as
-
-# Check to see if we are using GCC.
-if test "$with_gcc" != yes || test -z "$CC"; then
- # If CC is not set, then try to find GCC or a usable CC.
- if test -z "$CC"; then
- echo $ac_n "checking for gcc... $ac_c" 1>&6
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/gcc || test -f $dir/gcc$ac_exeext; then
- CC="gcc"
- break
- fi
- done
- IFS="$save_ifs"
-
- if test -n "$CC"; then
- echo "$ac_t$CC" 1>&6
- else
- echo "$ac_t"no 1>&6
- fi
- fi
-
- # Not "gcc", so try "cc", rejecting "/usr/ucb/cc".
- if test -z "$CC"; then
- echo $ac_n "checking for cc... $ac_c" 1>&6
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
- cc_rejected=no
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/cc || test -f $dir/cc$ac_exeext; then
- if test "$dir/cc" = "/usr/ucb/cc"; then
- cc_rejected=yes
- continue
- fi
- CC="cc"
- break
- fi
- done
- IFS="$save_ifs"
- if test $cc_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $CC
- shift
- if test $# -gt 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same name, so the bogon will be chosen
- # first if we set CC to just the name; use the full file name.
- shift
- set dummy "$dir/cc" "$@"
- shift
- CC="$@"
- fi
- fi
-
- if test -n "$CC"; then
- echo "$ac_t$CC" 1>&6
- else
- echo "$ac_t"no 1>&6
- fi
-
- if test -z "$CC"; then
- echo "$progname: error: no acceptable cc found in \$PATH" 1>&2
- exit 1
- fi
- fi
-
- # Now see if the compiler is really GCC.
- with_gcc=no
- echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6
- echo "$progname:581: checking whether we are using GNU C" >&5
-
- $rm conftest.c
- cat > conftest.c <<EOF
-#ifdef __GNUC__
- yes;
-#endif
-EOF
- if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:589: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
- with_gcc=yes
- fi
- $rm conftest.c
- echo "$ac_t$with_gcc" 1>&6
-fi
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="$2"
-
-echo $ac_n "checking for object suffix... $ac_c" 1>&6
-$rm conftest*
-echo 'int i = 1;' > conftest.c
-echo "$progname:603: checking for object suffix" >& 5
-if { (eval echo $progname:604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
- # Append any warnings to the config.log.
- cat conftest.err 1>&5
-
- for ac_file in conftest.*; do
- case $ac_file in
- *.c) ;;
- *) objext=`echo $ac_file | sed -e s/conftest.//` ;;
- esac
- done
-else
- cat conftest.err 1>&5
- echo "$progname: failed program was:" >&5
- cat conftest.c >&5
-fi
-$rm conftest*
-echo "$ac_t$objext" 1>&6
-
-echo $ac_n "checking for executable suffix... $ac_c" 1>&6
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_cv_exeext="no"
- $rm conftest*
- echo 'main () { return 0; }' > conftest.c
- echo "$progname:629: checking for executable suffix" >& 5
- if { (eval echo $progname:630: \"$ac_link\") 1>&5; (eval $ac_link) 2>conftest.err; }; then
- # Append any warnings to the config.log.
- cat conftest.err 1>&5
-
- for ac_file in conftest.*; do
- case $ac_file in
- *.c | *.err | *.$objext ) ;;
- *) ac_cv_exeext=.`echo $ac_file | sed -e s/conftest.//` ;;
- esac
- done
- else
- cat conftest.err 1>&5
- echo "$progname: failed program was:" >&5
- cat conftest.c >&5
- fi
- $rm conftest*
-fi
-if test "X$ac_cv_exeext" = Xno; then
- exeext=""
-else
- exeext="$ac_cv_exeext"
-fi
-echo "$ac_t$ac_cv_exeext" 1>&6
-
-echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
-pic_flag=
-special_shlib_compile_flags=
-wl=
-link_static_flag=
-no_builtin_flag=
-
-if test "$with_gcc" = yes; then
- wl='-Wl,'
- link_static_flag='-static'
-
- case "$host_os" in
- beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- aix*)
- # Below there is a dirty hack to force normal static linking with -ldl
- # The problem is because libdl dynamically linked with both libc and
- # libC (AIX C++ library), which obviously doesn't included in libraries
- # list by gcc. This cause undefined symbols with -static flags.
- # This hack allows C programs to be linked with "-static -ldl", but
- # we not sure about C++ programs.
- link_static_flag="$link_static_flag ${wl}-lC"
- ;;
- cygwin* | mingw* | os2*)
- # We can build DLLs from non-PIC.
- ;;
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- pic_flag='-m68020 -resident32 -malways-restore-a4'
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- pic_flag=-Kconform_pic
- fi
- ;;
- *)
- pic_flag='-fPIC'
- ;;
- esac
-else
- # PORTME Check for PIC flags for the system compiler.
- case "$host_os" in
- aix3* | aix4*)
- # All AIX code is PIC.
- link_static_flag='-bnso -bI:/lib/syscalls.exp'
- ;;
-
- hpux9* | hpux10* | hpux11*)
- # Is there a better link_static_flag that works with the bundled CC?
- wl='-Wl,'
- link_static_flag="${wl}-a ${wl}archive"
- pic_flag='+Z'
- ;;
-
- irix5* | irix6*)
- wl='-Wl,'
- link_static_flag='-non_shared'
- # PIC (with -KPIC) is the default.
- ;;
-
- cygwin* | mingw* | os2*)
- # We can build DLLs from non-PIC.
- ;;
-
- osf3* | osf4* | osf5*)
- # All OSF/1 code is PIC.
- wl='-Wl,'
- link_static_flag='-non_shared'
- ;;
-
- sco3.2v5*)
- pic_flag='-Kpic'
- link_static_flag='-dn'
- special_shlib_compile_flags='-belf'
- ;;
-
- solaris*)
- pic_flag='-KPIC'
- link_static_flag='-Bstatic'
- wl='-Wl,'
- ;;
-
- sunos4*)
- pic_flag='-PIC'
- link_static_flag='-Bstatic'
- wl='-Qoption ld '
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- pic_flag='-KPIC'
- link_static_flag='-Bstatic'
- wl='-Wl,'
- ;;
-
- uts4*)
- pic_flag='-pic'
- link_static_flag='-Bstatic'
- ;;
- sysv4*MP*)
- if test -d /usr/nec ;then
- pic_flag='-Kconform_pic'
- link_static_flag='-Bstatic'
- fi
- ;;
- *)
- can_build_shared=no
- ;;
- esac
-fi
-
-if test -n "$pic_flag"; then
- echo "$ac_t$pic_flag" 1>&6
-
- # Check to make sure the pic_flag actually works.
- echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6
- $rm conftest*
- echo "int some_variable = 0;" > conftest.c
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $pic_flag -DPIC"
- echo "$progname:776: checking if $compiler PIC flag $pic_flag works" >&5
- if { (eval echo $progname:777: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
- # Append any warnings to the config.log.
- cat conftest.err 1>&5
-
- case "$host_os" in
- hpux9* | hpux10* | hpux11*)
- # On HP-UX, both CC and GCC only warn that PIC is supported... then they
- # create non-PIC objects. So, if there were any warnings, we assume that
- # PIC is not supported.
- if test -s conftest.err; then
- echo "$ac_t"no 1>&6
- can_build_shared=no
- pic_flag=
- else
- echo "$ac_t"yes 1>&6
- pic_flag=" $pic_flag"
- fi
- ;;
- *)
- echo "$ac_t"yes 1>&6
- pic_flag=" $pic_flag"
- ;;
- esac
- else
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- can_build_shared=no
- pic_flag=
- echo "$ac_t"no 1>&6
- fi
- CFLAGS="$save_CFLAGS"
- $rm conftest*
-else
- echo "$ac_t"none 1>&6
-fi
-
-# Check to see if options -o and -c are simultaneously supported by compiler
-echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6
-$rm -r conftest 2>/dev/null
-mkdir conftest
-cd conftest
-$rm conftest*
-echo "int some_variable = 0;" > conftest.c
-mkdir out
-# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-# that will create temporary files in the current directory regardless of
-# the output directory. Thus, making CWD read-only will cause this test
-# to fail, enabling locking or at least warning the user not to do parallel
-# builds.
-chmod -w .
-save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS -o out/conftest2.o"
-echo "$progname:829: checking if $compiler supports -c -o file.o" >&5
-if { (eval echo $progname:830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.o; then
-
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s out/conftest.err; then
- echo "$ac_t"no 1>&6
- compiler_c_o=no
- else
- echo "$ac_t"yes 1>&6
- compiler_c_o=yes
- fi
-else
- # Append any errors to the config.log.
- cat out/conftest.err 1>&5
- compiler_c_o=no
- echo "$ac_t"no 1>&6
-fi
-CFLAGS="$save_CFLAGS"
-chmod u+w .
-$rm conftest* out/*
-rmdir out
-cd ..
-rmdir conftest
-$rm -r conftest 2>/dev/null
-
-if test x"$compiler_c_o" = x"yes"; then
- # Check to see if we can write to a .lo
- echo $ac_n "checking if $compiler supports -c -o file.lo... $ac_c" 1>&6
- $rm conftest*
- echo "int some_variable = 0;" > conftest.c
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -c -o conftest.lo"
- echo "$progname:862: checking if $compiler supports -c -o file.lo" >&5
-if { (eval echo $progname:863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then
-
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- echo "$ac_t"no 1>&6
- compiler_o_lo=no
- else
- echo "$ac_t"yes 1>&6
- compiler_o_lo=yes
- fi
- else
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- compiler_o_lo=no
- echo "$ac_t"no 1>&6
- fi
- CFLAGS="$save_CFLAGS"
- $rm conftest*
-else
- compiler_o_lo=no
-fi
-
-# Check to see if we can do hard links to lock some files if needed
-hard_links="nottested"
-if test "$compiler_c_o" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- echo "$ac_t$hard_links" 1>&6
- $rm conftest*
- if test "$hard_links" = no; then
- echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-if test "$with_gcc" = yes; then
- # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
- echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6
- $rm conftest*
- echo "int some_variable = 0;" > conftest.c
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c"
- echo "$progname:914: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
- if { (eval echo $progname:915: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then
-
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- echo "$ac_t"no 1>&6
- compiler_rtti_exceptions=no
- else
- echo "$ac_t"yes 1>&6
- compiler_rtti_exceptions=yes
- fi
- else
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- compiler_rtti_exceptions=no
- echo "$ac_t"no 1>&6
- fi
- CFLAGS="$save_CFLAGS"
- $rm conftest*
-
- if test "$compiler_rtti_exceptions" = "yes"; then
- no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
- else
- no_builtin_flag=' -fno-builtin'
- fi
-
-fi
-
-# Check for any special shared library compilation flags.
-if test -n "$special_shlib_compile_flags"; then
- echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2
- if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$special_shlib_compile_flags[ ]" >/dev/null; then :
- else
- echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2
- can_build_shared=no
- fi
-fi
-
-echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6
-$rm conftest*
-echo 'main(){return(0);}' > conftest.c
-save_LDFLAGS="$LDFLAGS"
-LDFLAGS="$LDFLAGS $link_static_flag"
-echo "$progname:958: checking if $compiler static flag $link_static_flag works" >&5
-if { (eval echo $progname:959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- echo "$ac_t$link_static_flag" 1>&6
-else
- echo "$ac_t"none 1>&6
- link_static_flag=
-fi
-LDFLAGS="$save_LDFLAGS"
-$rm conftest*
-
-if test -z "$LN_S"; then
- # Check to see if we can use ln -s, or we need hard links.
- echo $ac_n "checking whether ln -s works... $ac_c" 1>&6
- $rm conftest.dat
- if ln -s X conftest.dat 2>/dev/null; then
- $rm conftest.dat
- LN_S="ln -s"
- else
- LN_S=ln
- fi
- if test "$LN_S" = "ln -s"; then
- echo "$ac_t"yes 1>&6
- else
- echo "$ac_t"no 1>&6
- fi
-fi
-
-# Make sure LD is an absolute path.
-if test -z "$LD"; then
- ac_prog=ld
- if test "$with_gcc" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6
- echo "$progname:991: checking for ld used by GCC" >&5
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
- # Accept absolute paths.
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we are not using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
- elif test "$with_gnu_ld" = yes; then
- echo $ac_n "checking for GNU ld... $ac_c" 1>&6
- echo "$progname:1015: checking for GNU ld" >&5
- else
- echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
- echo "$progname:1018: checking for non-GNU ld" >&5
- fi
-
- if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
- fi
-
- if test -n "$LD"; then
- echo "$ac_t$LD" 1>&6
- else
- echo "$ac_t"no 1>&6
- fi
-
- if test -z "$LD"; then
- echo "$progname: error: no acceptable ld found in \$PATH" 1>&2
- exit 1
- fi
-fi
-
-# Check to see if it really is or is not GNU ld.
-echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6
-# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-echo "$ac_t$with_gnu_ld" 1>&6
-
-# See if the linker supports building shared libraries.
-echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6
-
-allow_undefined_flag=
-no_undefined_flag=
-need_lib_prefix=unknown
-need_version=unknown
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-archive_cmds=
-archive_expsym_cmds=
-old_archive_from_new_cmds=
-export_dynamic_flag_spec=
-whole_archive_flag_spec=
-thread_safe_flag_spec=
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-hardcode_shlibpath_var=unsupported
-runpath_var=
-always_export_symbols=no
-export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-# include_expsyms should be a list of space-separated symbols to be *always*
-# included in the symbol list
-include_expsyms=
-# exclude_expsyms can be an egrep regular expression of symbols to exclude
-# it will be wrapped by ` (' and `)$', so one must not match beginning or
-# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-# as well as any symbol that contains `d'.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-# platforms (ab)use it in PIC code, but their linkers get confused if
-# the symbol is explicitly referenced. Since portable code cannot
-# rely on this symbol name, it's probably fine to never include it in
-# preloaded symbol tables.
-
-case "$host_os" in
-cygwin* | mingw*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$with_gcc" != yes; then
- with_gnu_ld=no
- fi
- ;;
-
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # See if GNU ld supports shared libraries.
- case "$host_os" in
- aix3* | aix4*)
- # On AIX, the GNU linker is very broken
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- ;;
-
- amigaos*)
- archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can use
- # them.
- ld_shlibs=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- cygwin* | mingw*)
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec='-L$libdir'
- allow_undefined_flag=unsupported
- always_export_symbols=yes
-
- # Extract the symbol export list from an `--export-all' def file,
- # then regenerate the def file from the symbol export list, so that
- # the compiled dll only exports the symbol export list.
- export_symbols_cmds='test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
- test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
- $DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def $objdir/$soname-ltdll.$objext $libobjs $convenience~
- sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]* ; *//" < $objdir/$soname-def > $export_symbols'
-
- archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~
- _lt_hint=1;
- for symbol in `cat $export_symbols`; do
- echo " \$symbol @ \$_lt_hint ; " >> $objdir/$soname-def;
- _lt_hint=`expr 1 + \$_lt_hint`;
- done~
- test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
- test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
- $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
- $CC -Wl,--base-file,$objdir/$soname-base $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
- $CC $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts'
-
- old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a'
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linkopts -o $lib'
- # can we support soname and/or expsyms with a.out? -oliva
- fi
- ;;
-
- solaris* | sysv5*)
- if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- sunos4*)
- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linkopts'
- wlarc=
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- *)
- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- esac
-
- if test "$ld_shlibs" = yes; then
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
- case $host_os in
- cygwin* | mingw*)
- # dlltool doesn't understand --whole-archive et. al.
- whole_archive_flag_spec=
- ;;
- *)
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec=
- fi
- ;;
- esac
- fi
-else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case "$host_os" in
- aix3*)
- allow_undefined_flag=unsupported
- always_export_symbols=yes
- archive_expsym_cmds='$LD -o $objdir/$soname $libobjs $deplibs $linkopts -bE:$export_symbols -T512 -H512 -bM:SRE~$AR cru $lib $objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L=yes
- if test "$with_gcc" = yes && test -z "$link_static_flag"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct=unsupported
- fi
- ;;
-
- aix4*)
- hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib'
- hardcode_libdir_separator=':'
- if test "$with_gcc" = yes; then
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- hardcode_direct=yes
- else
- # We have old collect2
- hardcode_direct=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L=yes
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_libdir_separator=
- fi
- shared_flag='-shared'
- else
- shared_flag='${wl}-bM:SRE'
- hardcode_direct=yes
- fi
- allow_undefined_flag=' ${wl}-berok'
- archive_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}'
- archive_expsym_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}'
- case "$host_os" in aix4.[01]|aix4.[01].*)
- # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on
- always_export_symbols=yes ;;
- esac
- ;;
-
- amigaos*)
- archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs=no
- ;;
-
- cygwin* | mingw*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- allow_undefined_flag=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $lib $libobjs $linkopts `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_from_new_cmds='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds='lib /OUT:$oldlib$oldobjs'
- fix_srcfile_path='`cygpath -w $srcfile`'
- ;;
-
- freebsd1*)
- ld_shlibs=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd*)
- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- hpux9* | hpux10* | hpux11*)
- case "$host_os" in
- hpux9*) archive_cmds='$rm $objdir/$soname~$LD -b +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' ;;
- *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linkopts' ;;
- esac
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
- hardcode_minus_L=yes # Not in the search PATH, but as the default
- # location of the library.
- export_dynamic_flag_spec='${wl}-E'
- ;;
-
- irix5* | irix6*)
- if test "$with_gcc" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts' # a.out
- else
- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linkopts' # ELF
- fi
- hardcode_libdir_flag_spec='${wl}-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- openbsd*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- os2*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- allow_undefined_flag=unsupported
- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def~$echo DATA >> $objdir/$libname.def~$echo " SINGLE NONSHARED" >> $objdir/$libname.def~$echo EXPORTS >> $objdir/$libname.def~emxexp $libobjs >> $objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $linkopts $objdir/$libname.def'
- old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$with_gcc" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
-
- osf4* | osf5*) # As osf3* with the addition of the -msym flag
- if test "$with_gcc" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
-
- sco3.2v5*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ;;
-
- solaris*)
- no_undefined_flag=' -z text'
- # $CC -shared without GNU ld will not create a library from C++
- # object files and a static libstdc++, better avoid it by now
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_shlibpath_var=no
- case "$host_os" in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
- esac
- ;;
-
- sunos4*)
- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- sysv4)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
- ;;
-
- sysv4.3*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
- hardcode_shlibpath_var=no
- export_dynamic_flag_spec='-Bexport'
- ;;
-
- sysv5*)
- no_undefined_flag=' -z text'
- # $CC -shared without GNU ld will not create a library from C++
- # object files and a static libstdc++, better avoid it by now
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
- hardcode_libdir_flag_spec=
- hardcode_shlibpath_var=no
- runpath_var='LD_RUN_PATH'
- ;;
-
- uts4*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- dgux*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs=yes
- fi
- ;;
-
- sysv4.2uw2*)
- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts'
- hardcode_direct=yes
- hardcode_minus_L=no
- hardcode_shlibpath_var=no
- hardcode_runpath_var=yes
- runpath_var=LD_RUN_PATH
- ;;
-
- unixware7*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- ;;
-
- *)
- ld_shlibs=no
- ;;
- esac
-fi
-echo "$ac_t$ld_shlibs" 1>&6
-test "$ld_shlibs" = no && can_build_shared=no
-
-if test -z "$NM"; then
- echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6
- case "$NM" in
- [\\/]* | [A-Za-z]:[\\/]*) ;; # Let the user override the test with a path.
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
- for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- NM="$ac_dir/nm -B"
- break
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- NM="$ac_dir/nm -p"
- break
- else
- NM=${NM="$ac_dir/nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$NM" && NM=nm
- ;;
- esac
- echo "$ac_t$NM" 1>&6
-fi
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- symcode='[ABCDGISTW]'
- ;;
-hpux*) # Its linker distinguishes data from code symbols
- global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
- ;;
-irix*)
- symcode='[BCDEGRST]'
- ;;
-solaris*)
- symcode='[BDT]'
- ;;
-sysv4)
- symcode='[DFNSTU]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Write the raw and C identifiers.
- global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode\)[ ][ ]*\($ac_symprfx\)$sympat$/$symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
- $rm conftest*
- cat > conftest.c <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
- echo "$progname:1635: checking if global_symbol_pipe works" >&5
- if { (eval echo $progname:1636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if { echo "$progname:1639: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$objext conftstm.$objext
- save_LIBS="$LIBS"
- save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if { (eval echo $progname:1691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- pipe_works=yes
- else
- echo "$progname: failed program was:" >&5
- cat conftest.c >&5
- fi
- LIBS="$save_LIBS"
- else
- echo "cannot find nm_test_func in $nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&5
- fi
- else
- echo "cannot run $global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.c >&5
- fi
- $rm conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- global_symbol_pipe=
- fi
-done
-if test "$pipe_works" = yes; then
- echo "${ac_t}ok" 1>&6
-else
- echo "${ac_t}failed" 1>&6
-fi
-
-if test -z "$global_symbol_pipe"; then
- global_symbol_to_cdecl=
-fi
-
-# Check hardcoding attributes.
-echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
- test -n "$runpath_var"; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$hardcode_shlibpath_var" != no &&
- test "$hardcode_minus_L" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action=unsupported
-fi
-echo "$ac_t$hardcode_action" 1>&6
-
-
-reload_flag=
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6
-# PORTME Some linkers may need a different reload flag.
-reload_flag='-r'
-echo "$ac_t$reload_flag" 1>&6
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-# PORTME Fill in your ld.so characteristics
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-file_magic_cmd=
-file_magic_test_file=
-deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
-case "$host_os" in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}.so$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}.so$major'
- ;;
-
-aix4*)
- version_type=linux
- # AIX has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- # We preserve .a as extension for shared libraries though AIX4.2
- # and later linker supports .so
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.a'
- shlibpath_var=LIBPATH
- deplibs_check_method=pass_all
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}.so'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- deplibs_check_method=pass_all
- lt_cv_dlopen="load_add_on"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ;;
-
-bsdi4*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
- file_magic_cmd=/usr/bin/file
- file_magic_test_file=/shlib/libc.so
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- export_dynamic_flag_spec=-rdynamic
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw*)
- version_type=windows
- need_version=no
- need_lib_prefix=no
- if test "$with_gcc" = yes; then
- library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a'
- else
- library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
- fi
- dynamic_linker='Win32 ld.exe'
- deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- file_magic_cmd='${OBJDUMP} -f'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- lt_cv_dlopen="LoadLibrary"
- lt_cv_dlopen_libs=
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd*)
- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
- version_type=freebsd-$objformat
- case "$version_type" in
- freebsd-elf*)
- deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
- file_magic_cmd=/usr/bin/file
- file_magic_test_file=`echo /usr/lib/libc.so*`
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- deplibs_check_method=unknown
- library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case "$host_os" in
- freebsd2* | freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- ;;
- *) # from 3.2 on
- shlibpath_overrides_runpath=no
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- dynamic_linker="$host_os dld.sl"
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
- soname_spec='${libname}${release}.sl$major'
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-irix5* | irix6*)
- version_type=irix
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}.so.$major'
- library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major ${libname}${release}.so $libname.so'
- case "$host_os" in
- irix5*)
- libsuff= shlibsuff=
- # this will be overridden with pass_all, but let us keep it just in case
- deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
- ;;
- *)
- case "$LD" in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- file_magic_cmd=/usr/bin/file
- file_magic_test_file=`echo /lib${libsuff}/libc.so*`
- deplibs_check_method='pass_all'
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
- file_magic_cmd=/usr/bin/file
- file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-
- if test -f /lib/ld.so.1; then
- dynamic_linker='GNU ld.so'
- else
- # Only the GNU ld.so supports shared libraries on MkLinux.
- case "$host_cpu" in
- powerpc*) dynamic_linker=no ;;
- *) dynamic_linker='Linux ld.so' ;;
- esac
- fi
- ;;
-
-netbsd*)
- version_type=sunos
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
- soname_spec='${libname}${release}.so$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-openbsd*)
- version_type=sunos
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- need_version=no
- fi
- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-os2*)
- libname_spec='$name'
- need_lib_prefix=no
- library_names_spec='$libname.dll $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_version=no
- soname_spec='${libname}${release}.so'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- # this will be overridden with pass_all, but let us keep it just in case
- deplibs_check_method='file_magic COFF format alpha shared library'
- file_magic_cmd=/usr/bin/file
- file_magic_test_file=/shlib/libc.so
- deplibs_check_method='pass_all'
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-sco3.2v5*)
- version_type=osf
- soname_spec='${libname}${release}.so$major'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- deplibs_check_method="file_magic ELF [0-9][0-9]-bit [LM]SB dynamic lib"
- file_magic_cmd=/usr/bin/file
- file_magic_test_file=/lib/libc.so
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- version_type=linux
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- case "$host_vendor" in
- ncr)
- deplibs_check_method='pass_all'
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
- file_magic_cmd=/usr/bin/file
- file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- esac
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
- soname_spec='$libname.so.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-echo "$ac_t$dynamic_linker" 1>&6
-test "$dynamic_linker" = no && can_build_shared=no
-
-# Report the final consequences.
-echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
-
-# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
-# configure.in, otherwise build static only libraries.
-case "$host_os" in
-cygwin* | mingw* | os2*)
- if test x$can_build_shared = xyes; then
- test x$enable_win32_dll = xno && can_build_shared=no
- echo "checking if package supports dlls... $can_build_shared" 1>&6
- fi
-;;
-esac
-
-if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then
- case "$deplibs_check_method" in
- "file_magic "*)
- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- egrep "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
-fi
-
-echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case "$host_os" in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-
-aix4*)
- test "$enable_shared" = yes && enable_static=no
- ;;
-esac
-
-echo "$ac_t$enable_shared" 1>&6
-
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-
-echo "checking whether to build static libraries... $enable_static" 1>&6
-
-if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-echo $ac_n "checking for objdir... $ac_c" 1>&6
-rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-echo "$ac_t$objdir" 1>&6
-
-if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
- enable_dlopen_self_static=unknown
-else
-if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then
- lt_cv_dlopen=no lt_cv_dlopen_libs=
-echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "$progname:2212: checking for dlopen in -ldl" >&5
-ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-ldl $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2220 "ltconfig"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen();
-
-int main() {
-dlopen()
-; return 0; }
-EOF
-if { (eval echo $progname:2233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
- echo "$ac_t""no" 1>&6
-echo $ac_n "checking for dlopen""... $ac_c" 1>&6
-echo "$progname:2252: checking for dlopen" >&5
-if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2257 "ltconfig"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char dlopen(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_dlopen) || defined (__stub___dlopen)
-choke me
-#else
-dlopen();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo $progname:2282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_dlopen=yes"
-else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_dlopen=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- lt_cv_dlopen="dlopen"
-else
- echo "$ac_t""no" 1>&6
-echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
-echo "$progname:2299: checking for dld_link in -ldld" >&5
-ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-ldld $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2307 "ltconfig"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dld_link();
-
-int main() {
-dld_link()
-; return 0; }
-EOF
-if { (eval echo $progname:2320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
-else
- echo "$ac_t""no" 1>&6
-echo $ac_n "checking for shl_load""... $ac_c" 1>&6
-echo "$progname:2339: checking for shl_load" >&5
-if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2344 "ltconfig"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char shl_load(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_shl_load) || defined (__stub___shl_load)
-choke me
-#else
-shl_load();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo $progname:2369: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_shl_load=yes"
-else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_shl_load=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- lt_cv_dlopen="shl_load"
-else
- echo "$ac_t""no" 1>&6
-echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
-echo "$progname:2387: checking for shl_load in -ldld" >&5
-ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-ldld $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2395 "ltconfig"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load();
-
-int main() {
-shl_load()
-; return 0; }
-EOF
-if { (eval echo $progname:2409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-fi
-
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- fi
-
- case "$lt_cv_dlopen" in
- dlopen)
-for ac_hdr in dlfcn.h; do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "$progname:2452: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2457 "ltconfig"
-#include <$ac_hdr>
-int fnord = 0;
-EOF
-ac_try="$ac_compile >/dev/null 2>conftest.out"
-{ (eval echo $progname:2462: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-done
-
- if test "x$ac_cv_header_dlfcn_h" = xyes; then
- CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- fi
- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- LIBS="$lt_cv_dlopen_libs $LIBS"
-
- echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
-echo "$progname:2490: checking whether a program can dlopen itself" >&5
-if test "${lt_cv_dlopen_self+set}" = set; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- lt_cv_dlopen_self=cross
- else
- cat > conftest.c <<EOF
-#line 2498 "ltconfig"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LTDL_GLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LTDL_GLOBAL DL_GLOBAL
-# else
-# define LTDL_GLOBAL 0
-# endif
-#endif
-
-/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LTDL_LAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LTDL_LAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LTDL_LAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LTDL_LAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LTDL_LAZY_OR_NOW DL_NOW
-# else
-# define LTDL_LAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-fnord() { int i=42;}
-main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
- if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
- if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); }
-
-EOF
-if { (eval echo $progname:2544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
- lt_cv_dlopen_self=yes
-else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- lt_cv_dlopen_self=no
-fi
-rm -fr conftest*
-fi
-
-fi
-
-echo "$ac_t""$lt_cv_dlopen_self" 1>&6
-
- if test "$lt_cv_dlopen_self" = yes; then
- LDFLAGS="$LDFLAGS $link_static_flag"
- echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
-echo "$progname:2563: checking whether a statically linked program can dlopen itself" >&5
-if test "${lt_cv_dlopen_self_static+set}" = set; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- lt_cv_dlopen_self_static=cross
- else
- cat > conftest.c <<EOF
-#line 2571 "ltconfig"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LTDL_GLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LTDL_GLOBAL DL_GLOBAL
-# else
-# define LTDL_GLOBAL 0
-# endif
-#endif
-
-/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LTDL_LAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LTDL_LAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LTDL_LAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LTDL_LAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LTDL_LAZY_OR_NOW DL_NOW
-# else
-# define LTDL_LAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-fnord() { int i=42;}
-main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
- if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
- if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); }
-
-EOF
-if { (eval echo $progname:2617: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
- lt_cv_dlopen_self_static=yes
-else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- lt_cv_dlopen_self_static=no
-fi
-rm -fr conftest*
-fi
-
-fi
-
-echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
-fi
- ;;
- esac
-
- case "$lt_cv_dlopen_self" in
- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
- *) enable_dlopen_self=unknown ;;
- esac
-
- case "$lt_cv_dlopen_self_static" in
- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
- *) enable_dlopen_self_static=unknown ;;
- esac
-fi
-
-# Copy echo and quote the copy, instead of the original, because it is
-# used later.
-ltecho="$echo"
-if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then
- ltecho="$CONFIG_SHELL \$0 --fallback-echo"
-fi
-LTSHELL="$SHELL"
-
-LTCONFIG_VERSION="$VERSION"
-
-# Only quote variables if we're using ltmain.sh.
-case "$ltmain" in
-*.sh)
- # Now quote all the things that may contain metacharacters.
- for var in ltecho old_CC old_CFLAGS old_CPPFLAGS \
- old_LD old_LDFLAGS old_LIBS \
- old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS \
- AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \
- reload_flag reload_cmds wl \
- pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
- thread_safe_flag_spec whole_archive_flag_spec libname_spec \
- library_names_spec soname_spec \
- RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
- old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds postuninstall_cmds \
- file_magic_cmd export_symbols_cmds deplibs_check_method allow_undefined_flag no_undefined_flag \
- finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
- hardcode_libdir_flag_spec hardcode_libdir_separator \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
-
- case "$var" in
- reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case "$ltecho" in
- *'\$0 --fallback-echo"')
- ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
- trap "$rm \"$ofile\"; exit 1" 1 2 15
- echo "creating $ofile"
- $rm "$ofile"
- cat <<EOF > "$ofile"
-#! $SHELL
-
-# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
-#
-# Copyright (C) 1996-1999 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-### BEGIN LIBTOOL CONFIG
-EOF
- cfgfile="$ofile"
- ;;
-
-*)
- # Double-quote the variables that need it (for aesthetics).
- for var in old_CC old_CFLAGS old_CPPFLAGS \
- old_LD old_LDFLAGS old_LIBS \
- old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS; do
- eval "$var=\\\"\$var\\\""
- done
-
- # Just create a config file.
- cfgfile="$ofile.cfg"
- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
- echo "creating $cfgfile"
- $rm "$cfgfile"
- cat <<EOF > "$cfgfile"
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-EOF
- ;;
-esac
-
-cat <<EOF >> "$cfgfile"
-# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
-# LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\
-# NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\
-# DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP AS=$old_AS \\
-# $0$ltconfig_args
-#
-# Compiler and other test output produced by $progname, useful for
-# debugging $progname, is in ./config.log if it exists.
-
-# The version of $progname that generated this script.
-LTCONFIG_VERSION=$LTCONFIG_VERSION
-
-# Shell to use when invoking shell scripts.
-SHELL=$LTSHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-
-# An echo program that does not interpret backslashes.
-echo=$ltecho
-
-# The archiver.
-AR=$AR
-
-# The default C compiler.
-CC=$CC
-
-# The linker used to build libraries.
-LD=$LD
-
-# Whether we need hard or soft links.
-LN_S=$LN_S
-
-# A BSD-compatible nm program.
-NM=$NM
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$reload_flag
-reload_cmds=$reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$wl
-
-# Object file suffix (normally "o").
-objext="$objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$pic_flag
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$compiler_c_o
-
-# Can we write directly to a .lo ?
-compiler_o_lo=$compiler_o_lo
-
-# Must we lock files when doing compilation ?
-need_locks=$need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$link_static_flag
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$no_builtin_flag
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$whole_archive_flag_spec
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$thread_safe_flag_spec
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$RANLIB
-old_archive_cmds=$old_archive_cmds
-old_postinstall_cmds=$old_postinstall_cmds
-old_postuninstall_cmds=$old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$old_archive_from_new_cmds
-
-# Commands used to build and install a shared archive.
-archive_cmds=$archive_cmds
-archive_expsym_cmds=$archive_expsym_cmds
-postinstall_cmds=$postinstall_cmds
-postuninstall_cmds=$postuninstall_cmds
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$allow_undefined_flag
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$no_undefined_flag
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$global_symbol_to_cdecl
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$hardcode_libdir_separator
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$export_symbols_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$include_expsyms
-
-EOF
-
-case "$ltmain" in
-*.sh)
- echo '### END LIBTOOL CONFIG' >> "$ofile"
- echo >> "$ofile"
- case "$host_os" in
- aix3*)
- cat <<\EOF >> "$ofile"
-
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-EOF
- ;;
- esac
-
- # Append the ltmain.sh script.
- sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
-
- chmod +x "$ofile"
- ;;
-
-*)
- # Compile the libtool program.
- echo "FIXME: would compile $ltmain"
- ;;
-esac
-
-test -n "$cache_file" || exit 0
-
-# AC_CACHE_SAVE
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs. It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already. You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
-if cmp -s $cache_file confcache; then
- :
-else
- if test -w $cache_file; then
- echo "updating cache $cache_file"
- cat confcache > $cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
-fi
-rm -f confcache
-
-exit 0
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
+++ /dev/null
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun ltconfig.
-#
-# Copyright (C) 1996-1999 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell, and then maybe $echo will work.
- exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit 0
-fi
-
-# The name of this program.
-progname=`$echo "$0" | sed 's%^.*/%%'`
-modename="$progname"
-
-# Constants.
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.3.4
-TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)"
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-SP2NL='tr \040 \012'
-NL2SP='tr \015\012 \040\040'
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
- save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
- save_LANG="$LANG"; LANG=C; export LANG
-fi
-
-if test "$LTCONFIG_VERSION" != "$VERSION"; then
- echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit 1
-fi
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- echo "$modename: not configured to build any kind of library" 1>&2
- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit 1
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-
-# Parse our command line options once, thoroughly.
-while test $# -gt 0
-do
- arg="$1"
- shift
-
- case "$arg" in
- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
- esac
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case "$prev" in
- execute_dlfiles)
- eval "$prev=\"\$$prev \$arg\""
- ;;
- *)
- eval "$prev=\$arg"
- ;;
- esac
-
- prev=
- prevopt=
- continue
- fi
-
- # Have we seen a non-optional argument yet?
- case "$arg" in
- --help)
- show_help=yes
- ;;
-
- --version)
- echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
- exit 0
- ;;
-
- --config)
- sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0
- exit 0
- ;;
-
- --debug)
- echo "$progname: enabling shell trace mode"
- set -x
- ;;
-
- --dry-run | -n)
- run=:
- ;;
-
- --features)
- echo "host: $host"
- if test "$build_libtool_libs" = yes; then
- echo "enable shared libraries"
- else
- echo "disable shared libraries"
- fi
- if test "$build_old_libs" = yes; then
- echo "enable static libraries"
- else
- echo "disable static libraries"
- fi
- exit 0
- ;;
-
- --finish) mode="finish" ;;
-
- --mode) prevopt="--mode" prev=mode ;;
- --mode=*) mode="$optarg" ;;
-
- --quiet | --silent)
- show=:
- ;;
-
- -dlopen)
- prevopt="-dlopen"
- prev=execute_dlfiles
- ;;
-
- -*)
- $echo "$modename: unrecognized option \`$arg'" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
-
- *)
- nonopt="$arg"
- break
- ;;
- esac
-done
-
-if test -n "$prevopt"; then
- $echo "$modename: option \`$prevopt' requires an argument" 1>&2
- $echo "$help" 1>&2
- exit 1
-fi
-
-if test -z "$show_help"; then
-
- # Infer the operation mode.
- if test -z "$mode"; then
- case "$nonopt" in
- *cc | *++ | gcc* | *-gcc*)
- mode=link
- for arg
- do
- case "$arg" in
- -c)
- mode=compile
- break
- ;;
- esac
- done
- ;;
- *db | *dbx | *strace | *truss)
- mode=execute
- ;;
- *install*|cp|mv)
- mode=install
- ;;
- *rm)
- mode=uninstall
- ;;
- *)
- # If we have no mode, but dlfiles were specified, then do execute mode.
- test -n "$execute_dlfiles" && mode=execute
-
- # Just use the default operation mode.
- if test -z "$mode"; then
- if test -n "$nonopt"; then
- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
- else
- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
- fi
- fi
- ;;
- esac
- fi
-
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$execute_dlfiles" && test "$mode" != execute; then
- $echo "$modename: unrecognized option \`-dlopen'" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$modename --help --mode=$mode' for more information."
-
- # These modes are in order of execution frequency so that they run quickly.
- case "$mode" in
- # libtool compile mode
- compile)
- modename="$modename: compile"
- # Get the compilation command and the source file.
- base_compile=
- lastarg=
- srcfile="$nonopt"
- suppress_output=
-
- user_target=no
- for arg
- do
- # Accept any command-line options.
- case "$arg" in
- -o)
- if test "$user_target" != "no"; then
- $echo "$modename: you cannot specify \`-o' more than once" 1>&2
- exit 1
- fi
- user_target=next
- ;;
-
- -static)
- build_old_libs=yes
- continue
- ;;
- esac
-
- case "$user_target" in
- next)
- # The next one is the -o target name
- user_target=yes
- continue
- ;;
- yes)
- # We got the output file
- user_target=set
- libobj="$arg"
- continue
- ;;
- esac
-
- # Accept the current argument as the source file.
- lastarg="$srcfile"
- srcfile="$arg"
-
- # Aesthetically quote the previous argument.
-
- # Backslashify any backslashes, double quotes, and dollar signs.
- # These are the only characters that are still specially
- # interpreted inside of double-quoted scrings.
- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly in scan
- # sets, so we specify it separately.
- case "$lastarg" in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- lastarg="\"$lastarg\""
- ;;
- esac
-
- # Add the previous argument to base_compile.
- if test -z "$base_compile"; then
- base_compile="$lastarg"
- else
- base_compile="$base_compile $lastarg"
- fi
- done
-
- case "$user_target" in
- set)
- ;;
- no)
- # Get the name of the library object.
- libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
- ;;
- *)
- $echo "$modename: you must specify a target with \`-o'" 1>&2
- exit 1
- ;;
- esac
-
- # Recognize several different file suffixes.
- # If the user specifies -o file.o, it is replaced with file.lo
- xform='[cCFSfmso]'
- case "$libobj" in
- *.ada) xform=ada ;;
- *.adb) xform=adb ;;
- *.ads) xform=ads ;;
- *.asm) xform=asm ;;
- *.c++) xform=c++ ;;
- *.cc) xform=cc ;;
- *.cpp) xform=cpp ;;
- *.cxx) xform=cxx ;;
- *.f90) xform=f90 ;;
- *.for) xform=for ;;
- esac
-
- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
- case "$libobj" in
- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
- *)
- $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
- exit 1
- ;;
- esac
-
- if test -z "$base_compile"; then
- $echo "$modename: you must specify a compilation command" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- # Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
- removelist="$obj $libobj"
- else
- removelist="$libobj"
- fi
-
- $run $rm $removelist
- trap "$run $rm $removelist; exit 1" 1 2 15
-
- # Calculate the filename of the output object if compiler does
- # not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext}
- lockfile="$output_obj.lock"
- removelist="$removelist $output_obj $lockfile"
- trap "$run $rm $removelist; exit 1" 1 2 15
- else
- need_locks=no
- lockfile=
- fi
-
- # Lock this critical section if it is needed
- # We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
- until ln "$0" "$lockfile" 2>/dev/null; do
- $show "Waiting for $lockfile to be removed"
- sleep 2
- done
- elif test "$need_locks" = warn; then
- if test -f "$lockfile"; then
- echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit 1
- fi
- echo $srcfile > "$lockfile"
- fi
-
- if test -n "$fix_srcfile_path"; then
- eval srcfile=\"$fix_srcfile_path\"
- fi
-
- # Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
- # Without this assignment, base_compile gets emptied.
- fbsd_hideous_sh_bug=$base_compile
-
- # All platforms use -DPIC, to notify preprocessed assembler code.
- command="$base_compile $srcfile $pic_flag -DPIC"
- if test "$build_old_libs" = yes; then
- lo_libobj="$libobj"
- dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$dir" = "X$libobj"; then
- dir="$objdir"
- else
- dir="$dir/$objdir"
- fi
- libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
-
- if test -d "$dir"; then
- $show "$rm $libobj"
- $run $rm $libobj
- else
- $show "$mkdir $dir"
- $run $mkdir $dir
- status=$?
- if test $status -ne 0 && test ! -d $dir; then
- exit $status
- fi
- fi
- fi
- if test "$compiler_o_lo" = yes; then
- output_obj="$libobj"
- command="$command -o $output_obj"
- elif test "$compiler_c_o" = yes; then
- output_obj="$obj"
- command="$command -o $output_obj"
- fi
-
- $run $rm "$output_obj"
- $show "$command"
- if $run eval "$command"; then :
- else
- test -n "$output_obj" && $run $rm $removelist
- exit 1
- fi
-
- if test "$need_locks" = warn &&
- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
- echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit 1
- fi
-
- # Just move the object if needed, then go on to compile the next one
- if test x"$output_obj" != x"$libobj"; then
- $show "$mv $output_obj $libobj"
- if $run $mv $output_obj $libobj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # If we have no pic_flag, then copy the object into place and finish.
- if test -z "$pic_flag" && test "$build_old_libs" = yes; then
- # Rename the .lo from within objdir to obj
- if test -f $obj; then
- $show $rm $obj
- $run $rm $obj
- fi
-
- $show "$mv $libobj $obj"
- if $run $mv $libobj $obj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
-
- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$obj"; then
- xdir="."
- else
- xdir="$xdir"
- fi
- baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
- libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
- # Now arrange that obj and lo_libobj become the same file
- $show "(cd $xdir && $LN_S $baseobj $libobj)"
- if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
- exit 0
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Allow error messages only from the first compilation.
- suppress_output=' >/dev/null 2>&1'
- fi
-
- # Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- command="$base_compile $srcfile"
- if test "$compiler_c_o" = yes; then
- command="$command -o $obj"
- output_obj="$obj"
- fi
-
- # Suppress compiler output if we already did a PIC compilation.
- command="$command$suppress_output"
- $run $rm "$output_obj"
- $show "$command"
- if $run eval "$command"; then :
- else
- $run $rm $removelist
- exit 1
- fi
-
- if test "$need_locks" = warn &&
- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
- echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit 1
- fi
-
- # Just move the object if needed
- if test x"$output_obj" != x"$obj"; then
- $show "$mv $output_obj $obj"
- if $run $mv $output_obj $obj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Create an invalid libtool object if no PIC, so that we do not
- # accidentally link it into a program.
- if test "$build_libtool_libs" != yes; then
- $show "echo timestamp > $libobj"
- $run eval "echo timestamp > \$libobj" || exit $?
- else
- # Move the .lo from within objdir
- $show "$mv $libobj $lo_libobj"
- if $run $mv $libobj $lo_libobj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
- fi
-
- # Unlock the critical section if it was locked
- if test "$need_locks" != no; then
- $rm "$lockfile"
- fi
-
- exit 0
- ;;
-
- # libtool link mode
- link)
- modename="$modename: link"
- case "$host" in
- *-*-cygwin* | *-*-mingw* | *-*-os2*)
- # It is impossible to link a dll without this setting, and
- # we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
- # flag for every libtool invokation.
- # allow_undefined=no
-
- # FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
- # even a static library is built. For now, we need to specify
- # -no-undefined on the libtool link line when we can be certain
- # that all symbols are satisfied, otherwise we get a static library.
- allow_undefined=yes
-
- # This is a source program that is used to create dlls on Windows
- # Don't remove nor modify the starting and closing comments
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# # ifdef __CYGWIN32__
-# # define __CYGWIN__ __CYGWIN32__
-# # endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-# __hDllInstance_base = hInst;
-# return TRUE;
-# }
-# /* ltdll.c ends here */
- # This is a source program that is used to create import libraries
- # on Windows for dlls which lack them. Don't remove nor modify the
- # starting and closing comments
-# /* impgen.c starts here */
-# /* Copyright (C) 1999 Free Software Foundation, Inc.
-#
-# This file is part of GNU libtool.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-# */
-#
-# #include <stdio.h> /* for printf() */
-# #include <unistd.h> /* for open(), lseek(), read() */
-# #include <fcntl.h> /* for O_RDONLY, O_BINARY */
-# #include <string.h> /* for strdup() */
-#
-# static unsigned int
-# pe_get16 (fd, offset)
-# int fd;
-# int offset;
-# {
-# unsigned char b[2];
-# lseek (fd, offset, SEEK_SET);
-# read (fd, b, 2);
-# return b[0] + (b[1]<<8);
-# }
-#
-# static unsigned int
-# pe_get32 (fd, offset)
-# int fd;
-# int offset;
-# {
-# unsigned char b[4];
-# lseek (fd, offset, SEEK_SET);
-# read (fd, b, 4);
-# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# static unsigned int
-# pe_as32 (ptr)
-# void *ptr;
-# {
-# unsigned char *b = ptr;
-# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# int
-# main (argc, argv)
-# int argc;
-# char *argv[];
-# {
-# int dll;
-# unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-# unsigned long export_rva, export_size, nsections, secptr, expptr;
-# unsigned long name_rvas, nexp;
-# unsigned char *expdata, *erva;
-# char *filename, *dll_name;
-#
-# filename = argv[1];
-#
-# dll = open(filename, O_RDONLY|O_BINARY);
-# if (!dll)
-# return 1;
-#
-# dll_name = filename;
-#
-# for (i=0; filename[i]; i++)
-# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':')
-# dll_name = filename + i +1;
-#
-# pe_header_offset = pe_get32 (dll, 0x3c);
-# opthdr_ofs = pe_header_offset + 4 + 20;
-# num_entries = pe_get32 (dll, opthdr_ofs + 92);
-#
-# if (num_entries < 1) /* no exports */
-# return 1;
-#
-# export_rva = pe_get32 (dll, opthdr_ofs + 96);
-# export_size = pe_get32 (dll, opthdr_ofs + 100);
-# nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-# secptr = (pe_header_offset + 4 + 20 +
-# pe_get16 (dll, pe_header_offset + 4 + 16));
-#
-# expptr = 0;
-# for (i = 0; i < nsections; i++)
-# {
-# char sname[8];
-# unsigned long secptr1 = secptr + 40 * i;
-# unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-# unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-# unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-# lseek(dll, secptr1, SEEK_SET);
-# read(dll, sname, 8);
-# if (vaddr <= export_rva && vaddr+vsize > export_rva)
-# {
-# expptr = fptr + (export_rva - vaddr);
-# if (export_rva + export_size > vaddr + vsize)
-# export_size = vsize - (export_rva - vaddr);
-# break;
-# }
-# }
-#
-# expdata = (unsigned char*)malloc(export_size);
-# lseek (dll, expptr, SEEK_SET);
-# read (dll, expdata, export_size);
-# erva = expdata - export_rva;
-#
-# nexp = pe_as32 (expdata+24);
-# name_rvas = pe_as32 (expdata+32);
-#
-# printf ("EXPORTS\n");
-# for (i = 0; i<nexp; i++)
-# {
-# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-# }
-#
-# return 0;
-# }
-# /* impgen.c ends here */
- ;;
- *)
- allow_undefined=yes
- ;;
- esac
- compile_command="$nonopt"
- finalize_command="$nonopt"
-
- compile_rpath=
- finalize_rpath=
- compile_shlibpath=
- finalize_shlibpath=
- convenience=
- old_convenience=
- deplibs=
- linkopts=
-
- if test -n "$shlibpath_var"; then
- # get the directories listed in $shlibpath_var
- eval lib_search_path=\`\$echo \"X \${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
- else
- lib_search_path=
- fi
- # now prepend the system-specific ones
- eval lib_search_path=\"$sys_lib_search_path_spec\$lib_search_path\"
- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
- avoid_version=no
- dlfiles=
- dlprefiles=
- dlself=no
- export_dynamic=no
- export_symbols=
- export_symbols_regex=
- generated=
- libobjs=
- link_against_libtool_libs=
- ltlibs=
- module=no
- objs=
- prefer_static_libs=no
- preload=no
- prev=
- prevarg=
- release=
- rpath=
- xrpath=
- perm_rpath=
- temp_rpath=
- thread_safe=no
- vinfo=
-
- # We need to know -static, to get the right output filenames.
- for arg
- do
- case "$arg" in
- -all-static | -static)
- if test "X$arg" = "X-all-static"; then
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
- $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
- fi
- if test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- else
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- fi
- build_libtool_libs=no
- build_old_libs=yes
- prefer_static_libs=yes
- break
- ;;
- esac
- done
-
- # See if our shared archives depend on static archives.
- test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
- # Go through the arguments, transforming them on the way.
- while test $# -gt 0; do
- arg="$1"
- shift
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case "$prev" in
- output)
- compile_command="$compile_command @OUTPUT@"
- finalize_command="$finalize_command @OUTPUT@"
- ;;
- esac
-
- case "$prev" in
- dlfiles|dlprefiles)
- if test "$preload" = no; then
- # Add the symbol object into the linking commands.
- compile_command="$compile_command @SYMFILE@"
- finalize_command="$finalize_command @SYMFILE@"
- preload=yes
- fi
- case "$arg" in
- *.la | *.lo) ;; # We handle these cases below.
- force)
- if test "$dlself" = no; then
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- self)
- if test "$prev" = dlprefiles; then
- dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
- dlself=yes
- else
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- *)
- if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
- else
- dlprefiles="$dlprefiles $arg"
- fi
- prev=
- ;;
- esac
- ;;
- expsyms)
- export_symbols="$arg"
- if test ! -f "$arg"; then
- $echo "$modename: symbol file \`$arg' does not exist"
- exit 1
- fi
- prev=
- continue
- ;;
- expsyms_regex)
- export_symbols_regex="$arg"
- prev=
- continue
- ;;
- release)
- release="-$arg"
- prev=
- continue
- ;;
- rpath | xrpath)
- # We need an absolute path.
- case "$arg" in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit 1
- ;;
- esac
- if test "$prev" = rpath; then
- case "$rpath " in
- *" $arg "*) ;;
- *) rpath="$rpath $arg" ;;
- esac
- else
- case "$xrpath " in
- *" $arg "*) ;;
- *) xrpath="$xrpath $arg" ;;
- esac
- fi
- prev=
- continue
- ;;
- *)
- eval "$prev=\"\$arg\""
- prev=
- continue
- ;;
- esac
- fi
-
- prevarg="$arg"
-
- case "$arg" in
- -all-static)
- if test -n "$link_static_flag"; then
- compile_command="$compile_command $link_static_flag"
- finalize_command="$finalize_command $link_static_flag"
- fi
- continue
- ;;
-
- -allow-undefined)
- # FIXME: remove this flag sometime in the future.
- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
- continue
- ;;
-
- -avoid-version)
- avoid_version=yes
- continue
- ;;
-
- -dlopen)
- prev=dlfiles
- continue
- ;;
-
- -dlpreopen)
- prev=dlprefiles
- continue
- ;;
-
- -export-dynamic)
- export_dynamic=yes
- continue
- ;;
-
- -export-symbols | -export-symbols-regex)
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: not more than one -exported-symbols argument allowed"
- exit 1
- fi
- if test "X$arg" = "X-export-symbols"; then
- prev=expsyms
- else
- prev=expsyms_regex
- fi
- continue
- ;;
-
- -L*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
- # We need an absolute path.
- case "$dir" in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
- absdir="$dir"
- fi
- dir="$absdir"
- ;;
- esac
- case " $deplibs " in
- *" $arg "*) ;;
- *) deplibs="$deplibs $arg";;
- esac
- case " $lib_search_path " in
- *" $dir "*) ;;
- *) lib_search_path="$lib_search_path $dir";;
- esac
- case "$host" in
- *-*-cygwin* | *-*-mingw* | *-*-os2*)
- dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
- case ":$dllsearchpath:" in
- ::) dllsearchpath="$dllsearchdir";;
- *":$dllsearchdir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$dllsearchdir";;
- esac
- ;;
- esac
- ;;
-
- -l*)
- if test "$arg" = "-lc"; then
- case "$host" in
- *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
- # These systems don't actually have c library (as such)
- continue
- ;;
- esac
- elif test "$arg" = "-lm"; then
- case "$host" in
- *-*-cygwin* | *-*-beos*)
- # These systems don't actually have math library (as such)
- continue
- ;;
- esac
- fi
- deplibs="$deplibs $arg"
- ;;
-
- -module)
- module=yes
- continue
- ;;
-
- -no-undefined)
- allow_undefined=no
- continue
- ;;
-
- -o) prev=output ;;
-
- -release)
- prev=release
- continue
- ;;
-
- -rpath)
- prev=rpath
- continue
- ;;
-
- -R)
- prev=xrpath
- continue
- ;;
-
- -R*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
- # We need an absolute path.
- case "$dir" in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit 1
- ;;
- esac
- case "$xrpath " in
- *" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
- esac
- continue
- ;;
-
- -static)
- # If we have no pic_flag, then this is the same as -all-static.
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- compile_command="$compile_command $link_static_flag"
- finalize_command="$finalize_command $link_static_flag"
- fi
- continue
- ;;
-
- -thread-safe)
- thread_safe=yes
- continue
- ;;
-
- -version-info)
- prev=vinfo
- continue
- ;;
-
- # Some other compiler flag.
- -* | +*)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case "$arg" in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- arg="\"$arg\""
- ;;
- esac
- ;;
-
- *.o | *.obj | *.a | *.lib)
- # A standard object.
- objs="$objs $arg"
- ;;
-
- *.lo)
- # A library object.
- if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
- if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
- prev=
- fi
- libobjs="$libobjs $arg"
- ;;
-
- *.la)
- # A libtool-controlled library.
-
- dlname=
- libdir=
- library_names=
- old_library=
-
- # Check to see that this really is a libtool archive.
- if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
- exit 1
- fi
-
- # If the library was installed with an old release of libtool,
- # it will not redefine variable installed.
- installed=yes
-
- # Read the .la file
- # If there is no directory component, then add one.
- case "$arg" in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- # Get the name of the library we link against.
- linklib=
- for l in $old_library $library_names; do
- linklib="$l"
- done
-
- if test -z "$linklib"; then
- $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
- exit 1
- fi
-
- # Find the relevant object directory and library name.
- name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
-
- if test "X$installed" = Xyes; then
- dir="$libdir"
- else
- dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$dir" = "X$arg"; then
- dir="$objdir"
- else
- dir="$dir/$objdir"
- fi
- fi
-
- if test -n "$dependency_libs"; then
- # Extract -R and -L from dependency_libs
- temp_deplibs=
- for deplib in $dependency_libs; do
- case "$deplib" in
- -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
- case " $rpath $xrpath " in
- *" $temp_xrpath "*) ;;
- *) xrpath="$xrpath $temp_xrpath";;
- esac;;
- -L*) case "$compile_command $temp_deplibs " in
- *" $deplib "*) ;;
- *) temp_deplibs="$temp_deplibs $deplib";;
- esac
- temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- case " $lib_search_path " in
- *" $temp_dir "*) ;;
- *) lib_search_path="$lib_search_path $temp_dir";;
- esac
- ;;
- *) temp_deplibs="$temp_deplibs $deplib";;
- esac
- done
- dependency_libs="$temp_deplibs"
- fi
-
- if test -z "$libdir"; then
- # It is a libtool convenience library, so add in its objects.
- convenience="$convenience $dir/$old_library"
- old_convenience="$old_convenience $dir/$old_library"
- deplibs="$deplibs$dependency_libs"
- compile_command="$compile_command $dir/$old_library$dependency_libs"
- finalize_command="$finalize_command $dir/$old_library$dependency_libs"
- continue
- fi
-
- # This library was specified with -dlopen.
- if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
- if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then
- # If there is no dlname, no dlopen support or we're linking statically,
- # we need to preload.
- prev=dlprefiles
- else
- # We should not create a dependency on this library, but we
- # may need any libraries it requires.
- compile_command="$compile_command$dependency_libs"
- finalize_command="$finalize_command$dependency_libs"
- prev=
- continue
- fi
- fi
-
- # The library was specified with -dlpreopen.
- if test "$prev" = dlprefiles; then
- # Prefer using a static library (so that no silly _DYNAMIC symbols
- # are required to link).
- if test -n "$old_library"; then
- dlprefiles="$dlprefiles $dir/$old_library"
- else
- dlprefiles="$dlprefiles $dir/$linklib"
- fi
- prev=
- fi
-
- if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
- link_against_libtool_libs="$link_against_libtool_libs $arg"
- if test -n "$shlibpath_var"; then
- # Make sure the rpath contains only unique directories.
- case "$temp_rpath " in
- *" $dir "*) ;;
- *) temp_rpath="$temp_rpath $dir" ;;
- esac
- fi
-
- # We need an absolute path.
- case "$dir" in
- [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
- absdir="$dir"
- fi
- ;;
- esac
-
- # This is the magic to use -rpath.
- # Skip directories that are in the system default run-time
- # search path, unless they have been requested with -R.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
- esac
- ;;
- esac
-
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
- esac
- ;;
- esac
-
- lib_linked=yes
- case "$hardcode_action" in
- immediate | unsupported)
- if test "$hardcode_direct" = no; then
- compile_command="$compile_command $dir/$linklib"
- deplibs="$deplibs $dir/$linklib"
- case "$host" in
- *-*-cygwin* | *-*-mingw* | *-*-os2*)
- dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
- if test -n "$dllsearchpath"; then
- dllsearchpath="$dllsearchpath:$dllsearchdir"
- else
- dllsearchpath="$dllsearchdir"
- fi
- ;;
- esac
- elif test "$hardcode_minus_L" = no; then
- case "$host" in
- *-*-sunos*)
- compile_shlibpath="$compile_shlibpath$dir:"
- ;;
- esac
- case "$compile_command " in
- *" -L$dir "*) ;;
- *) compile_command="$compile_command -L$dir";;
- esac
- compile_command="$compile_command -l$name"
- deplibs="$deplibs -L$dir -l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- case ":$compile_shlibpath:" in
- *":$dir:"*) ;;
- *) compile_shlibpath="$compile_shlibpath$dir:";;
- esac
- compile_command="$compile_command -l$name"
- deplibs="$deplibs -l$name"
- else
- lib_linked=no
- fi
- ;;
-
- relink)
- if test "$hardcode_direct" = yes; then
- compile_command="$compile_command $absdir/$linklib"
- deplibs="$deplibs $absdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- case "$compile_command " in
- *" -L$absdir "*) ;;
- *) compile_command="$compile_command -L$absdir";;
- esac
- compile_command="$compile_command -l$name"
- deplibs="$deplibs -L$absdir -l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- case ":$compile_shlibpath:" in
- *":$absdir:"*) ;;
- *) compile_shlibpath="$compile_shlibpath$absdir:";;
- esac
- compile_command="$compile_command -l$name"
- deplibs="$deplibs -l$name"
- else
- lib_linked=no
- fi
- ;;
-
- *)
- lib_linked=no
- ;;
- esac
-
- if test "$lib_linked" != yes; then
- $echo "$modename: configuration error: unsupported hardcode properties"
- exit 1
- fi
-
- # Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes; then
- finalize_command="$finalize_command $libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- case "$finalize_command " in
- *" -L$libdir "*) ;;
- *) finalize_command="$finalize_command -L$libdir";;
- esac
- finalize_command="$finalize_command -l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- case ":$finalize_shlibpath:" in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:";;
- esac
- finalize_command="$finalize_command -l$name"
- else
- # We cannot seem to hardcode it, guess we'll fake it.
- case "$finalize_command " in
- *" -L$dir "*) ;;
- *) finalize_command="$finalize_command -L$libdir";;
- esac
- finalize_command="$finalize_command -l$name"
- fi
- else
- # Transform directly to old archives if we don't build new libraries.
- if test -n "$pic_flag" && test -z "$old_library"; then
- $echo "$modename: cannot find static library for \`$arg'" 1>&2
- exit 1
- fi
-
- # Here we assume that one of hardcode_direct or hardcode_minus_L
- # is not unsupported. This is valid on all known static and
- # shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
- compile_command="$compile_command $dir/$linklib"
- finalize_command="$finalize_command $dir/$linklib"
- else
- case "$compile_command " in
- *" -L$dir "*) ;;
- *) compile_command="$compile_command -L$dir";;
- esac
- compile_command="$compile_command -l$name"
- case "$finalize_command " in
- *" -L$dir "*) ;;
- *) finalize_command="$finalize_command -L$dir";;
- esac
- finalize_command="$finalize_command -l$name"
- fi
- fi
-
- # Add in any libraries that this one depends upon.
- compile_command="$compile_command$dependency_libs"
- finalize_command="$finalize_command$dependency_libs"
- continue
- ;;
-
- # Some other compiler argument.
- *)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case "$arg" in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- arg="\"$arg\""
- ;;
- esac
- ;;
- esac
-
- # Now actually substitute the argument into the commands.
- if test -n "$arg"; then
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
- done
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
- eval arg=\"$export_dynamic_flag_spec\"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
-
- oldlibs=
- # calculate the name of the file, without its directory
- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
- libobjs_save="$libobjs"
-
- case "$output" in
- "")
- $echo "$modename: you must specify an output file" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
-
- *.a | *.lib)
- if test -n "$link_against_libtool_libs"; then
- $echo "$modename: error: cannot link libtool libraries into archives" 1>&2
- exit 1
- fi
-
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
- fi
-
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
- fi
-
- # Now set the variables for building old libraries.
- build_libtool_libs=no
- oldlibs="$output"
- ;;
-
- *.la)
- # Make sure we only generate libraries of the form `libNAME.la'.
- case "$outputname" in
- lib*)
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
- eval libname=\"$libname_spec\"
- ;;
- *)
- if test "$module" = no; then
- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
- if test "$need_lib_prefix" != no; then
- # Add the "lib" prefix for modules if required
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- eval libname=\"$libname_spec\"
- else
- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- fi
- ;;
- esac
-
- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$output_objdir" = "X$output"; then
- output_objdir="$objdir"
- else
- output_objdir="$output_objdir/$objdir"
- fi
-
- if test -n "$objs"; then
- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
- exit 1
- fi
-
- # How the heck are we supposed to write a wrapper for a shared library?
- if test -n "$link_against_libtool_libs"; then
- $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2
- exit 1
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
- fi
-
- set dummy $rpath
- if test $# -gt 2; then
- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
- fi
- install_libdir="$2"
-
- oldlibs=
- if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
- # Building a libtool convenience library.
- libext=al
- oldlibs="$output_objdir/$libname.$libext $oldlibs"
- build_libtool_libs=convenience
- build_old_libs=yes
- fi
- dependency_libs="$deplibs"
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
- fi
- else
-
- # Parse the version information argument.
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
- set dummy $vinfo 0 0 0
- IFS="$save_ifs"
-
- if test -n "$8"; then
- $echo "$modename: too many parameters to \`-version-info'" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- current="$2"
- revision="$3"
- age="$4"
-
- # Check that each of the things are valid numbers.
- case "$current" in
- 0 | [1-9] | [1-9][0-9]*) ;;
- *)
- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- ;;
- esac
-
- case "$revision" in
- 0 | [1-9] | [1-9][0-9]*) ;;
- *)
- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- ;;
- esac
-
- case "$age" in
- 0 | [1-9] | [1-9][0-9]*) ;;
- *)
- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- ;;
- esac
-
- if test $age -gt $current; then
- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- fi
-
- # Calculate the version variables.
- major=
- versuffix=
- verstring=
- case "$version_type" in
- none) ;;
-
- irix)
- major=`expr $current - $age + 1`
- versuffix="$major.$revision"
- verstring="sgi$major.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$revision
- while test $loop != 0; do
- iface=`expr $revision - $loop`
- loop=`expr $loop - 1`
- verstring="sgi$major.$iface:$verstring"
- done
- ;;
-
- linux)
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- ;;
-
- osf)
- major=`expr $current - $age`
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$age
- while test $loop != 0; do
- iface=`expr $current - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring:${iface}.0"
- done
-
- # Make executables depend on our current version.
- verstring="$verstring:${current}.0"
- ;;
-
- sunos)
- major=".$current"
- versuffix=".$current.$revision"
- ;;
-
- freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
- ;;
-
- freebsd-elf)
- major=".$current"
- versuffix=".$current";
- ;;
-
- windows)
- # Like Linux, but with '-' rather than '.', since we only
- # want one extension on Windows 95.
- major=`expr $current - $age`
- versuffix="-$major-$age-$revision"
- ;;
-
- *)
- $echo "$modename: unknown library version type \`$version_type'" 1>&2
- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit 1
- ;;
- esac
-
- # Clear the version info if we defaulted, and they specified a release.
- if test -z "$vinfo" && test -n "$release"; then
- major=
- verstring="0.0"
- if test "$need_version" = no; then
- versuffix=
- else
- versuffix=".0.0"
- fi
- fi
-
- # Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
- major=
- versuffix=
- verstring=""
- fi
-
- # Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
- build_libtool_libs=no
- build_old_libs=yes
- fi
- else
- # Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
- fi
-
- dependency_libs="$deplibs"
- case "$host" in
- *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
- # these systems don't actually have a c library (as such)!
- ;;
- *)
- # Add libc to deplibs on all other systems.
- deplibs="$deplibs -lc"
- ;;
- esac
- fi
-
- # Create the output directory, or remove our outputs if we need to.
- if test -d $output_objdir; then
- $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
- $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
- else
- $show "$mkdir $output_objdir"
- $run $mkdir $output_objdir
- status=$?
- if test $status -ne 0 && test ! -d $output_objdir; then
- exit $status
- fi
- fi
-
- # Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
- oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
- # Transform .lo files to .o files.
- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
- fi
-
- if test "$build_libtool_libs" = yes; then
- # Transform deplibs into only deplibs that can be linked in shared.
- name_save=$name
- libname_save=$libname
- release_save=$release
- versuffix_save=$versuffix
- major_save=$major
- # I'm not sure if I'm treating the release correctly. I think
- # release should show up in the -l (ie -lgmp5) so we don't want to
- # add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
- newdeplibs=
- droppeddeps=no
- case "$deplibs_check_method" in
- pass_all)
- # Don't check for shared/static. Everything works.
- # This might be a little naive. We might want to check
- # whether the library exists or not. But this is on
- # osf3 & osf4 and I'm not really sure... Just
- # implementing what was already the behaviour.
- newdeplibs=$deplibs
- ;;
- test_compile)
- # This code stresses the "libraries are programs" paradigm to its
- # limits. Maybe even breaks it. We compile a program, linking it
- # against the deplibs as a proxy for the library. Then we can check
- # whether they linked in statically or dynamically with ldd.
- $rm conftest.c
- cat > conftest.c <<EOF
- int main() { return 0; }
-EOF
- $rm conftest
- $CC -o conftest conftest.c $deplibs
- if test $? -eq 0 ; then
- ldd_output=`ldd conftest`
- for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- echo
- echo "*** Warning: This library needs some functionality provided by $i."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- else
- # Error occured in the first compile. Let's try to salvage the situation:
- # Compile a seperate program for each library.
- for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" ; then
- $rm conftest
- $CC -o conftest conftest.c $i
- # Did it work?
- if test $? -eq 0 ; then
- ldd_output=`ldd conftest`
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- echo
- echo "*** Warning: This library needs some functionality provided by $i."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
- fi
- else
- droppeddeps=yes
- echo
- echo "*** Warning! Library $i is needed by this library but I was not able to"
- echo "*** make it link in! You will probably need to install it or some"
- echo "*** library that it depends on before this library will be fully"
- echo "*** functional. Installing it before continuing would be even better."
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- fi
- ;;
- file_magic*)
- set dummy $deplibs_check_method
- file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 \(.*\)\"`"
- for a_deplib in $deplibs; do
- name="`expr $a_deplib : '-l\(.*\)'`"
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- # Follow soft links.
- if ls -lLd "$potent_lib" 2>/dev/null \
- | grep " -> " >/dev/null; then
- continue
- fi
- # The statement above tries to avoid entering an
- # endless loop below, in case of cyclic links.
- # We might still enter an endless loop, since a link
- # loop can be closed while we follow links,
- # but so what?
- potlib="$potent_lib"
- while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | sed 's/.* -> //'`
- case "$potliblink" in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
- esac
- done
- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
- | sed 10q \
- | egrep "$file_magic_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- echo
- echo "*** Warning: This library needs some functionality provided by $a_deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
- fi
- else
- # Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
- done # Gone through all deplibs.
- ;;
- none | unknown | *)
- newdeplibs=""
- if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
- -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' |
- grep . >/dev/null; then
- echo
- if test "X$deplibs_check_method" = "Xnone"; then
- echo "*** Warning: inter-library dependencies are not supported in this platform."
- else
- echo "*** Warning: inter-library dependencies are not known to be supported."
- fi
- echo "*** All declared inter-library dependencies are being dropped."
- droppeddeps=yes
- fi
- ;;
- esac
- versuffix=$versuffix_save
- major=$major_save
- release=$release_save
- libname=$libname_save
- name=$name_save
-
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
- echo
- echo "*** Warning: libtool could not satisfy all declared inter-library"
- echo "*** dependencies of module $libname. Therefore, libtool will create"
- echo "*** a static module, that should work as long as the dlopening"
- echo "*** application is linked with the -dlopen flag."
- if test -z "$global_symbol_pipe"; then
- echo
- echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- else
- echo "*** The inter-library dependencies that have been dropped here will be"
- echo "*** automatically added whenever a program is linked with this library"
- echo "*** or is declared to -dlopen it."
- fi
- fi
- # Done checking deplibs!
- deplibs=$newdeplibs
- fi
-
- # All the library-specific variables (install_libdir is set above).
- library_names=
- old_library=
- dlname=
-
- # Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- # Get the real and link names of the library.
- eval library_names=\"$library_names_spec\"
- set dummy $library_names
- realname="$2"
- shift; shift
-
- if test -n "$soname_spec"; then
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
-
- lib="$output_objdir/$realname"
- for link
- do
- linknames="$linknames $link"
- done
-
- # Ensure that we have .o objects for linkers which dislike .lo
- # (e.g. aix) in case we are running --disable-static
- for obj in $libobjs; do
- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$obj"; then
- xdir="."
- else
- xdir="$xdir"
- fi
- baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
- if test ! -f $xdir/$oldobj; then
- $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
- $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
- fi
- done
-
- # Use standard objects if they are pic
- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- eval cmds=\"$export_symbols_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex"; then
- $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
- $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
- $show "$mv \"${export_symbols}T\" \"$export_symbols\""
- $run eval '$mv "${export_symbols}T" "$export_symbols"'
- fi
- fi
- fi
-
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
- fi
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${outputname}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "mkdir $gentop"
- $run mkdir "$gentop"
- status=$?
- if test $status -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
- generated="$generated $gentop"
-
- for xlib in $convenience; do
- # Extract the objects.
- case "$xlib" in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "mkdir $xdir"
- $run mkdir "$xdir"
- status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
- libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
- done
- fi
- fi
-
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
- eval flag=\"$thread_safe_flag_spec\"
- linkopts="$linkopts $flag"
- fi
-
- # Do each of the archive commands.
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval cmds=\"$archive_expsym_cmds\"
- else
- eval cmds=\"$archive_cmds\"
- fi
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- # Create links to the real library.
- for linkname in $linknames; do
- if test "$realname" != "$linkname"; then
- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
- fi
- done
-
- # If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
- # On all known operating systems, these are identical.
- dlname="$soname"
- fi
- fi
- ;;
-
- *.lo | *.o | *.obj)
- if test -n "$link_against_libtool_libs"; then
- $echo "$modename: error: cannot link libtool libraries into objects" 1>&2
- exit 1
- fi
-
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
- fi
-
- case "$output" in
- *.lo)
- if test -n "$objs"; then
- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
- exit 1
- fi
- libobj="$output"
- obj=`$echo "X$output" | $Xsed -e "$lo2o"`
- ;;
- *)
- libobj=
- obj="$output"
- ;;
- esac
-
- # Delete the old objects.
- $run $rm $obj $libobj
-
- # Objects from convenience libraries. This assumes
- # single-version convenience libraries. Whenever we create
- # different ones for PIC/non-PIC, this we'll have to duplicate
- # the extraction.
- reload_conv_objs=
- gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec
- wl=
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${obj}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "mkdir $gentop"
- $run mkdir "$gentop"
- status=$?
- if test $status -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
- generated="$generated $gentop"
-
- for xlib in $convenience; do
- # Extract the objects.
- case "$xlib" in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "mkdir $xdir"
- $run mkdir "$xdir"
- status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
- reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
- done
- fi
- fi
-
- # Create the old-style object.
- reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs"
-
- output="$obj"
- eval cmds=\"$reload_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- # Exit if we aren't doing a library object file.
- if test -z "$libobj"; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit 0
- fi
-
- if test "$build_libtool_libs" != yes; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- # Create an invalid libtool object if no PIC, so that we don't
- # accidentally link it into a program.
- $show "echo timestamp > $libobj"
- $run eval "echo timestamp > $libobj" || exit $?
- exit 0
- fi
-
- if test -n "$pic_flag"; then
- # Only do commands if we really have different PIC objects.
- reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
- eval cmds=\"$reload_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- else
- # Just create a symlink.
- $show $rm $libobj
- $run $rm $libobj
- xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$libobj"; then
- xdir="."
- else
- xdir="$xdir"
- fi
- baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
- $show "(cd $xdir && $LN_S $oldobj $baseobj)"
- $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
- fi
-
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit 0
- ;;
-
- # Anything else should be a program.
- *)
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
- fi
-
- if test "$preload" = yes; then
- if test "$dlopen" = unknown && test "$dlopen_self" = unknown &&
- test "$dlopen_self_static" = unknown; then
- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
- fi
- fi
-
- if test -n "$rpath$xrpath"; then
- # If the user specified any rpath flags, then add them.
- for libdir in $rpath $xrpath; do
- # This is the magic to use -rpath.
- case "$compile_rpath " in
- *" $libdir "*) ;;
- *) compile_rpath="$compile_rpath $libdir" ;;
- esac
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
- esac
- done
- fi
-
- # Now hardcode the library paths
- rpath=
- hardcode_libdirs=
- for libdir in $compile_rpath $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- compile_rpath="$rpath"
-
- rpath=
- hardcode_libdirs=
- for libdir in $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$finalize_perm_rpath " in
- *" $libdir "*) ;;
- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- finalize_rpath="$rpath"
-
- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$output_objdir" = "X$output"; then
- output_objdir="$objdir"
- else
- output_objdir="$output_objdir/$objdir"
- fi
-
- # Create the binary in the object directory, then wrap it.
- if test ! -d $output_objdir; then
- $show "$mkdir $output_objdir"
- $run $mkdir $output_objdir
- status=$?
- if test $status -ne 0 && test ! -d $output_objdir; then
- exit $status
- fi
- fi
-
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
- # Transform all the library objects into standard objects.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- fi
-
- dlsyms=
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- if test -n "$NM" && test -n "$global_symbol_pipe"; then
- dlsyms="${outputname}S.c"
- else
- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
- fi
- fi
-
- if test -n "$dlsyms"; then
- case "$dlsyms" in
- "") ;;
- *.c)
- # Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${outputname}.nm"
-
- $show "$rm $nlist ${nlist}S ${nlist}T"
- $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
- # Parse the name list into a source file.
- $show "creating $output_objdir/$dlsyms"
-
- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
- if test "$dlself" = yes; then
- $show "generating symbol list for \`$output'"
-
- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
- # Add our own program objects to the symbol list.
- progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- for arg in $progfiles; do
- $show "extracting global C symbols from \`$arg'"
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -n "$exclude_expsyms"; then
- $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- if test -n "$export_symbols_regex"; then
- $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$output.exp"
- $run $rm $export_symbols
- $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
- else
- $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
- $run eval 'mv "$nlist"T "$nlist"'
- fi
- fi
-
- for arg in $dlprefiles; do
- $show "extracting global C symbols from \`$arg'"
- name=`echo "$arg" | sed -e 's%^.*/%%'`
- $run eval 'echo ": $name " >> "$nlist"'
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -z "$run"; then
- # Make sure we have at least an empty file.
- test -f "$nlist" || : > "$nlist"
-
- if test -n "$exclude_expsyms"; then
- egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
- $mv "$nlist"T "$nlist"
- fi
-
- # Try sorting and uniquifying the output.
- if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
- :
- else
- grep -v "^: " < "$nlist" > "$nlist"S
- fi
-
- if test -f "$nlist"S; then
- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
- else
- echo '/* NONE */' >> "$output_objdir/$dlsyms"
- fi
-
- $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
- sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \
- -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \
- < "$nlist" >> "$output_objdir/$dlsyms"
-
- $echo >> "$output_objdir/$dlsyms" "\
- {0, (lt_ptr_t) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
- fi
-
- pic_flag_for_symtable=
- case "$host" in
- # compiling the symbol table file with pic_flag works around
- # a FreeBSD bug that causes programs to crash when -lm is
- # linked before any other PIC object. But we must not use
- # pic_flag when linking with -static. The problem exists in
- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)\r
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
- esac;;
- *-*-hpux*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag -DPIC";;
- esac
- esac
-
- # Now compile the dynamic symbol file.
- $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
- $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
- # Clean up the generated files.
- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
- # Transform the symbol file into the correct name.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- ;;
- *)
- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
- exit 1
- ;;
- esac
- else
- # We keep going just in case the user didn't refer to
- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
- # really was required.
-
- # Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
- fi
-
- if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
- # Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
- link_command="$compile_command$compile_rpath"
-
- # We have no uninstalled library dependencies, so finalize right now.
- $show "$link_command"
- $run eval "$link_command"
- status=$?
-
- # Delete the generated files.
- if test -n "$dlsyms"; then
- $show "$rm $output_objdir/${outputname}S.${objext}"
- $run $rm "$output_objdir/${outputname}S.${objext}"
- fi
-
- exit $status
- fi
-
- if test -n "$shlibpath_var"; then
- # We should set the shlibpath_var
- rpath=
- for dir in $temp_rpath; do
- case "$dir" in
- [\\/]* | [A-Za-z]:[\\/]*)
- # Absolute path.
- rpath="$rpath$dir:"
- ;;
- *)
- # Relative path: add a thisdir entry.
- rpath="$rpath\$thisdir/$dir:"
- ;;
- esac
- done
- temp_rpath="$rpath"
- fi
-
- if test -n "$compile_shlibpath$finalize_shlibpath"; then
- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
- fi
- if test -n "$finalize_shlibpath"; then
- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
- fi
-
- compile_var=
- finalize_var=
- if test -n "$runpath_var"; then
- if test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- if test -n "$finalize_perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $finalize_perm_rpath; do
- rpath="$rpath$dir:"
- done
- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- fi
-
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
-
- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
- $echo "$modename: \`$output' will be relinked during installation" 1>&2
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
-
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
- # Delete the old output files.
- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
- $show "$link_command"
- $run eval "$link_command" || exit $?
-
- # Now create the wrapper script.
- $show "creating $output"
-
- # Quote the relink command for shipping.
- if test -n "$relink_command"; then
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Quote $echo for shipping.
- if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
- case "$0" in
- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
- *) qecho="$SHELL `pwd`/$0 --fallback-echo";;
- esac
- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
- else
- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Only actually do things if our run command is non-null.
- if test -z "$run"; then
- # win32 will think the script is a binary if it has
- # a .exe suffix, so we strip it off here.
- case $output in
- *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
- esac
- $rm $output
- trap "$rm $output; exit 1" 1 2 15
-
- # quick and dirty hack by Elrond <Elrond@Wunder-Nett.org>
- # to get libtool work with paths in its
- # output names.
- relink_curdir="`pwd`"
-
- $echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
-
-relink_curdir=\"$relink_curdir\"
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
- # install mode needs the following variable:
- link_against_libtool_libs='$link_against_libtool_libs'
-else
- # When we are sourced in execute mode, \$file and \$echo are already set.
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- echo=\"$qecho\"
- file=\"\$0\"
- # Make sure echo works.
- if test \"X\$1\" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
- # Yippee, \$echo works!
- :
- else
- # Restart under the correct shell, and then maybe \$echo will work.
- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
- fi
- fi\
-"
- $echo >> $output "\
-
- # Find the directory that this script lives in.
- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
- # Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
- while test -n \"\$file\"; do
- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
- # If there was a directory component, then change thisdir.
- if test \"x\$destdir\" != \"x\$file\"; then
- case \"\$destdir\" in
- [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;;
- *) thisdir=\"\$thisdir/\$destdir\" ;;
- esac
- fi
-
- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
- done
-
- # Try to get the absolute directory name.
- absdir=\`cd \"\$thisdir\" && pwd\`
- test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
- if test "$fast_install" = yes; then
- echo >> $output "\
- program=lt-'$outputname'
- progdir=\"\$thisdir/$objdir\"
-
- if test ! -f \"\$progdir/\$program\" || \\
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
- file=\"\$\$-\$program\"
-
- if test ! -d \"\$progdir\"; then
- $mkdir \"\$progdir\"
- else
- $rm \"\$progdir/\$file\"
- fi"
-
- echo >> $output "\
-
- # relink executable if necessary
- if test -n \"\$relink_command\"; then
- if (cd \"\$relink_curdir\" && eval \$relink_command); then :
- else
- $rm \"\$progdir/\$file\"
- exit 1
- fi
- fi
-
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
- { $rm \"\$progdir/\$program\";
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
- $rm \"\$progdir/\$file\"
- fi"
- else
- echo >> $output "\
- program='$outputname'
- progdir=\"\$thisdir/$objdir\"
-"
- fi
-
- echo >> $output "\
-
- if test -f \"\$progdir/\$program\"; then"
-
- # Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- $echo >> $output "\
- # Add our own library path to $shlibpath_var
- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
- # Some systems cannot cope with colon-terminated $shlibpath_var
- # The second colon is a workaround for a bug in BeOS R4 sed
- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
- export $shlibpath_var
-"
- fi
-
- # fixup the dll searchpath if we need to.
- if test -n "$dllsearchpath"; then
- $echo >> $output "\
- # Add the dll search path components to the executable PATH
- PATH=$dllsearchpath:\$PATH
-"
- fi
-
- $echo >> $output "\
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- # Run the actual program with our arguments.
-"
- case $host in
- *-*-cygwin* | *-*-mingw | *-*-os2*)
- # win32 systems need to use the prog path for dll
- # lookup to work
- $echo >> $output "\
- exec \$progdir\\\\\$program \${1+\"\$@\"}
-"
- ;;
- *)
- $echo >> $output "\
- # Export the path to the program.
- PATH=\"\$progdir:\$PATH\"
- export PATH
-
- exec \$program \${1+\"\$@\"}
-"
- ;;
- esac
- $echo >> $output "\
- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
- exit 1
- fi
- else
- # The program doesn't exist.
- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
- \$echo \"This script is just a wrapper for \$program.\" 1>&2
- echo \"See the $PACKAGE documentation for more information.\" 1>&2
- exit 1
- fi
-fi\
-"
- chmod +x $output
- fi
- exit 0
- ;;
- esac
-
- # See if we need to build an old-fashioned archive.
- for oldlib in $oldlibs; do
-
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
- build_libtool_libs=no
- else
- oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
- fi
- addlibs="$old_convenience"
- fi
-
- if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "mkdir $gentop"
- $run mkdir "$gentop"
- status=$?
- if test $status -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
- generated="$generated $gentop"
-
- # Add in members from convenience archives.
- for xlib in $addlibs; do
- # Extract the objects.
- case "$xlib" in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "mkdir $xdir"
- $run mkdir "$xdir"
- status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
- done
- fi
-
- # Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
- eval cmds=\"$old_archive_from_new_cmds\"
- else
- # Ensure that we have .o objects in place in case we decided
- # not to build a shared library, and have fallen back to building
- # static libs even though --disable-static was passed!
- for oldobj in $oldobjs; do
- if test ! -f $oldobj; then
- xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$oldobj"; then
- xdir="."
- else
- xdir="$xdir"
- fi
- baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
- obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
- $show "(cd $xdir && ${LN_S} $obj $baseobj)"
- $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
- fi
- done
-
- eval cmds=\"$old_archive_cmds\"
- fi
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$generated"; then
- $show "${rm}r$generated"
- $run ${rm}r$generated
- fi
-
- # Now create the libtool archive.
- case "$output" in
- *.la)
- old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
- $show "creating $output"
-
- if test -n "$xrpath"; then
- temp_xrpath=
- for libdir in $xrpath; do
- temp_xrpath="$temp_xrpath -R$libdir"
- done
- dependency_libs="$temp_xrpath $dependency_libs"
- fi
-
- # Only create the output if not a dry run.
- if test -z "$run"; then
- for installed in no yes; do
- if test "$installed" = yes; then
- if test -z "$install_libdir"; then
- break
- fi
- output="$output_objdir/$outputname"i
- fi
- $rm $output
- $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$dlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'\
-"
- done
- fi
-
- # Do a symbolic link so that the libtool archive can be found in
- # LD_LIBRARY_PATH before the program is installed.
- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
- $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $?
- ;;
- esac
- exit 0
- ;;
-
- # libtool install mode
- install)
- modename="$modename: install"
-
- # There may be an optional sh(1) argument at the beginning of
- # install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then
- # Aesthetically quote it.
- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
- case "$arg" in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- arg="\"$arg\""
- ;;
- esac
- install_prog="$arg "
- arg="$1"
- shift
- else
- install_prog=
- arg="$nonopt"
- fi
-
- # The real first argument should be the name of the installation program.
- # Aesthetically quote it.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case "$arg" in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog$arg"
-
- # We need to accept at least all the BSD install flags.
- dest=
- files=
- opts=
- prev=
- install_type=
- isdir=no
- stripme=
- for arg
- do
- if test -n "$dest"; then
- files="$files $dest"
- dest="$arg"
- continue
- fi
-
- case "$arg" in
- -d) isdir=yes ;;
- -f) prev="-f" ;;
- -g) prev="-g" ;;
- -m) prev="-m" ;;
- -o) prev="-o" ;;
- -s)
- stripme=" -s"
- continue
- ;;
- -*) ;;
-
- *)
- # If the previous option needed an argument, then skip it.
- if test -n "$prev"; then
- prev=
- else
- dest="$arg"
- continue
- fi
- ;;
- esac
-
- # Aesthetically quote the argument.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case "$arg" in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog $arg"
- done
-
- if test -z "$install_prog"; then
- $echo "$modename: you must specify an install program" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prev' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- if test -z "$files"; then
- if test -z "$dest"; then
- $echo "$modename: no file or destination specified" 1>&2
- else
- $echo "$modename: you must specify a destination" 1>&2
- fi
- $echo "$help" 1>&2
- exit 1
- fi
-
- # Strip any trailing slash from the destination.
- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
- # Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
- destname=
- else
- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
- test "X$destdir" = "X$dest" && destdir=.
- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
- # Not a directory, so check to see that there is only one file specified.
- set dummy $files
- if test $# -gt 2; then
- $echo "$modename: \`$dest' is not a directory" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
- fi
- case "$destdir" in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- for file in $files; do
- case "$file" in
- *.lo) ;;
- *)
- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
- esac
- done
- ;;
- esac
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- staticlibs=
- future_libdirs=
- current_libdirs=
- for file in $files; do
-
- # Do each installation.
- case "$file" in
- *.a | *.lib)
- # Do the static libraries later.
- staticlibs="$staticlibs $file"
- ;;
-
- *.la)
- # Check to see that this really is a libtool archive.
- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- library_names=
- old_library=
- # If there is no directory component, then add one.
- case "$file" in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Add the libdir to current_libdirs if it is the destination.
- if test "X$destdir" = "X$libdir"; then
- case "$current_libdirs " in
- *" $libdir "*) ;;
- *) current_libdirs="$current_libdirs $libdir" ;;
- esac
- else
- # Note the libdir as a future libdir.
- case "$future_libdirs " in
- *" $libdir "*) ;;
- *) future_libdirs="$future_libdirs $libdir" ;;
- esac
- fi
-
- dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
- test "X$dir" = "X$file/" && dir=
- dir="$dir$objdir"
-
- # See the names of the shared library.
- set dummy $library_names
- if test -n "$2"; then
- realname="$2"
- shift
- shift
-
- # Install the shared library and build the symlinks.
- $show "$install_prog $dir/$realname $destdir/$realname"
- $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $?
-
- if test $# -gt 0; then
- # Delete the old symlinks, and create new ones.
- for linkname
- do
- if test "$linkname" != "$realname"; then
- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
- fi
- done
- fi
-
- # Do each command in the postinstall commands.
- lib="$destdir/$realname"
- eval cmds=\"$postinstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- # Install the pseudo-library for information purposes.
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- instname="$dir/$name"i
- $show "$install_prog $instname $destdir/$name"
- $run eval "$install_prog $instname $destdir/$name" || exit $?
-
- # Maybe install the static library, too.
- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
- ;;
-
- *.lo)
- # Install (i.e. copy) a libtool object.
-
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # Deduce the name of the destination old-style object file.
- case "$destfile" in
- *.lo)
- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
- ;;
- *.o | *.obj)
- staticdest="$destfile"
- destfile=
- ;;
- *)
- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
- esac
-
- # Install the libtool object if requested.
- if test -n "$destfile"; then
- $show "$install_prog $file $destfile"
- $run eval "$install_prog $file $destfile" || exit $?
- fi
-
- # Install the old object if enabled.
- if test "$build_old_libs" = yes; then
- # Deduce the name of the old-style object file.
- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
- $show "$install_prog $staticobj $staticdest"
- $run eval "$install_prog \$staticobj \$staticdest" || exit $?
- fi
- exit 0
- ;;
-
- *)
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # Do a test to see if this is really a libtool program.
- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- link_against_libtool_libs=
- relink_command=
-
- # If there is no directory component, then add one.
- case "$file" in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Check the variables that should have been set.
- if test -z "$link_against_libtool_libs"; then
- $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
- exit 1
- fi
-
- finalize=yes
- for lib in $link_against_libtool_libs; do
- # Check to see that each library is installed.
- libdir=
- if test -f "$lib"; then
- # If there is no directory component, then add one.
- case "$lib" in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- fi
- libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
- if test -n "$libdir" && test ! -f "$libfile"; then
- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
- finalize=no
- fi
- done
-
- outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
- if test "$finalize" = yes && test -z "$run"; then
- tmpdir="/tmp"
- test -n "$TMPDIR" && tmpdir="$TMPDIR"
- tmpdir="$tmpdir/libtool-$$"
- if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
- else
- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
- continue
- fi
- # quick and dirty hack by Elrond <Elrond@Wunder-Nett.org>
- # to get libtool work with paths in its
- # output names.
- file=`$echo "X$file" | $Xsed -e 's%/%_%g'`
- outputname="$tmpdir/$file"
- # Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- ${rm}r "$tmpdir"
- continue
- fi
- file="$outputname"
- else
- $echo "$modename: warning: cannot relink \`$file'" 1>&2
- fi
- else
- # Install the binary that we compiled earlier.
- file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
- fi
- fi
-
- $show "$install_prog$stripme $file $destfile"
- $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
- test -n "$outputname" && ${rm}r "$tmpdir"
- ;;
- esac
- done
-
- for file in $staticlibs; do
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
- # Set up the ranlib parameters.
- oldlib="$destdir/$name"
-
- $show "$install_prog $file $oldlib"
- $run eval "$install_prog \$file \$oldlib" || exit $?
-
- # Do each command in the postinstall commands.
- eval cmds=\"$old_postinstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$future_libdirs"; then
- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
- fi
-
- if test -n "$current_libdirs"; then
- # Maybe just do a dry run.
- test -n "$run" && current_libdirs=" -n$current_libdirs"
- exec $SHELL $0 --finish$current_libdirs
- exit 1
- fi
-
- exit 0
- ;;
-
- # libtool finish mode
- finish)
- modename="$modename: finish"
- libdirs="$nonopt"
- admincmds=
-
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- for dir
- do
- libdirs="$libdirs $dir"
- done
-
- for libdir in $libdirs; do
- if test -n "$finish_cmds"; then
- # Do each command in the finish commands.
- eval cmds=\"$finish_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || admincmds="$admincmds
- $cmd"
- done
- IFS="$save_ifs"
- fi
- if test -n "$finish_eval"; then
- # Do the single finish_eval.
- eval cmds=\"$finish_eval\"
- $run eval "$cmds" || admincmds="$admincmds
- $cmds"
- fi
- done
- fi
-
- # Exit here if they wanted silent mode.
- test "$show" = : && exit 0
-
- echo "----------------------------------------------------------------------"
- echo "Libraries have been installed in:"
- for libdir in $libdirs; do
- echo " $libdir"
- done
- echo
- echo "If you ever happen to want to link against installed libraries"
- echo "in a given directory, LIBDIR, you must either use libtool, and"
- echo "specify the full pathname of the library, or use \`-LLIBDIR'"
- echo "flag during linking and do at least one of the following:"
- if test -n "$shlibpath_var"; then
- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
- echo " during execution"
- fi
- if test -n "$runpath_var"; then
- echo " - add LIBDIR to the \`$runpath_var' environment variable"
- echo " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
-
- echo " - use the \`$flag' linker flag"
- fi
- if test -n "$admincmds"; then
- echo " - have your system administrator run these commands:$admincmds"
- fi
- if test -f /etc/ld.so.conf; then
- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
- fi
- echo
- echo "See any operating system documentation about shared libraries for"
- echo "more information, such as the ld(1) and ld.so(8) manual pages."
- echo "----------------------------------------------------------------------"
- exit 0
- ;;
-
- # libtool execute mode
- execute)
- modename="$modename: execute"
-
- # The first argument is the command name.
- cmd="$nonopt"
- if test -z "$cmd"; then
- $echo "$modename: you must specify a COMMAND" 1>&2
- $echo "$help"
- exit 1
- fi
-
- # Handle -dlopen flags immediately.
- for file in $execute_dlfiles; do
- if test ! -f "$file"; then
- $echo "$modename: \`$file' is not a file" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- dir=
- case "$file" in
- *.la)
- # Check to see that this really is a libtool archive.
- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- # Read the libtool library.
- dlname=
- library_names=
-
- # If there is no directory component, then add one.
- case "$file" in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Skip this library if it cannot be dlopened.
- if test -z "$dlname"; then
- # Warn if it was a shared library.
- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
- continue
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
-
- if test -f "$dir/$objdir/$dlname"; then
- dir="$dir/$objdir"
- else
- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
- exit 1
- fi
- ;;
-
- *.lo)
- # Just add the directory containing the .lo file.
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
- ;;
-
- *)
- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
- continue
- ;;
- esac
-
- # Get the absolute pathname.
- absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
-
- # Now add the directory to shlibpath_var.
- if eval "test -z \"\$$shlibpath_var\""; then
- eval "$shlibpath_var=\"\$dir\""
- else
- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
- fi
- done
-
- # This variable tells wrapper scripts just to set shlibpath_var
- # rather than running their programs.
- libtool_execute_magic="$magic"
-
- # Check if any of the arguments is a wrapper script.
- args=
- for file
- do
- case "$file" in
- -*) ;;
- *)
- # Do a test to see if this is really a libtool program.
- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- # If there is no directory component, then add one.
- case "$file" in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Transform arg to wrapped name.
- file="$progdir/$program"
- fi
- ;;
- esac
- # Quote arguments (to preserve shell metacharacters).
- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
- args="$args \"$file\""
- done
-
- if test -z "$run"; then
- if test -n "$shlibpath_var"; then
- # Export the shlibpath_var.
- eval "export $shlibpath_var"
- fi
-
- # Restore saved enviroment variables
- if test "${save_LC_ALL+set}" = set; then
- LC_ALL="$save_LC_ALL"; export LC_ALL
- fi
- if test "${save_LANG+set}" = set; then
- LANG="$save_LANG"; export LANG
- fi
-
- # Now actually exec the command.
- eval "exec \$cmd$args"
-
- $echo "$modename: cannot exec \$cmd$args"
- exit 1
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
- $echo "export $shlibpath_var"
- fi
- $echo "$cmd$args"
- exit 0
- fi
- ;;
-
- # libtool uninstall mode
- uninstall)
- modename="$modename: uninstall"
- rm="$nonopt"
- files=
-
- for arg
- do
- case "$arg" in
- -*) rm="$rm $arg" ;;
- *) files="$files $arg" ;;
- esac
- done
-
- if test -z "$rm"; then
- $echo "$modename: you must specify an RM program" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- for file in $files; do
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
- rmfiles="$file"
-
- case "$name" in
- *.la)
- # Possibly a libtool archive, so verify it.
- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- . $dir/$name
-
- # Delete the libtool libraries and symlinks.
- for n in $library_names; do
- rmfiles="$rmfiles $dir/$n"
- done
- test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
-
- $show "$rm $rmfiles"
- $run $rm $rmfiles
-
- if test -n "$library_names"; then
- # Do each command in the postuninstall commands.
- eval cmds=\"$postuninstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd"
- done
- IFS="$save_ifs"
- fi
-
- if test -n "$old_library"; then
- # Do each command in the old_postuninstall commands.
- eval cmds=\"$old_postuninstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd"
- done
- IFS="$save_ifs"
- fi
-
- # FIXME: should reinstall the best remaining shared library.
- fi
- ;;
-
- *.lo)
- if test "$build_old_libs" = yes; then
- oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
- rmfiles="$rmfiles $dir/$oldobj"
- fi
- $show "$rm $rmfiles"
- $run $rm $rmfiles
- ;;
-
- *)
- $show "$rm $rmfiles"
- $run $rm $rmfiles
- ;;
- esac
- done
- exit 0
- ;;
-
- "")
- $echo "$modename: you must specify a MODE" 1>&2
- $echo "$generic_help" 1>&2
- exit 1
- ;;
- esac
-
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$generic_help" 1>&2
- exit 1
-fi # test -z "$show_help"
-
-# We need to display help for each of the modes.
-case "$mode" in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
- --config show all configuration variables
- --debug enable verbose shell tracing
--n, --dry-run display commands without modifying any files
- --features display basic configuration information and exit
- --finish same as \`--mode=finish'
- --help display this help message and exit
- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
- --quiet same as \`--silent'
- --silent don't print informational messages
- --version print version information
-
-MODE must be one of the following:
-
- compile compile a source file into a libtool object
- execute automatically set library path, then run a program
- finish complete the installation of libtool libraries
- install install libraries or executables
- link create a library or an executable
- uninstall remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE."
- exit 0
- ;;
-
-compile)
- $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
- -o OUTPUT-FILE set the output file name to OUTPUT-FILE
- -static always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
- ;;
-
-execute)
- $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
- -dlopen FILE add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
- ;;
-
-finish)
- $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
- ;;
-
-install)
- $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
- ;;
-
-link)
- $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
- -all-static do not do any dynamic linking at all
- -avoid-version do not add a version suffix if possible
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
- -export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
- -export-symbols-regex REGEX
- try to export only the symbols matching REGEX
- -LLIBDIR search LIBDIR for required installed libraries
- -lNAME OUTPUT-FILE requires the installed library libNAME
- -module build a library that can dlopened
- -no-undefined declare that a library does not refer to external symbols
- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -release RELEASE specify package release information
- -rpath LIBDIR the created library will eventually be installed in LIBDIR
- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -static do not do any dynamic linking of libtool libraries
- -version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename. Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
- ;;
-
-uninstall)
- $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
- ;;
-
-*)
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
-esac
-
-echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit 0
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
git.samba.org / jra / samba / .git / commitdiff