--- /dev/null
+typedef struct nt_printer_driver_info_level_3
+{
+ uint32 cversion;
+
+ fstring name;
+ fstring environment;
+ fstring driverpath;
+ fstring datafile;
+ fstring configfile;
+ fstring helpfile;
+ fstring monitorname;
+ fstring defaultdatatype;
+ char **dependentfiles;
+
+} NT_PRINTER_DRIVER_INFO_LEVEL_3;
+
+typedef struct nt_printer_driver_info_level
+{
+ NT_PRINTER_DRIVER_INFO_LEVEL_3 *info_3;
+} NT_PRINTER_DRIVER_INFO_LEVEL;
+
+typedef struct nt_printer_param
+{
+ fstring value;
+ uint32 type;
+ uint8 *data;
+ int data_len;
+ struct nt_printer_param *next;
+} NT_PRINTER_PARAM;
+
+typedef struct ntdevicemode
+{
+ fstring devicename;
+ uint16 specversion;
+ uint16 driverversion;
+ uint16 size;
+ uint16 driverextra;
+ uint32 fields;
+ uint16 orientation;
+ uint16 papersize;
+ uint16 paperlength;
+ uint16 paperwidth;
+ uint16 scale;
+ uint16 copies;
+ uint16 defaultsource;
+ uint16 printquality;
+ uint16 color;
+ uint16 duplex;
+ uint16 yresolution;
+ uint16 ttoption;
+ uint16 collate;
+ fstring formname;
+ uint16 logpixels;
+ uint32 bitsperpel;
+ uint32 pelswidth;
+ uint32 pelsheight;
+ uint32 displayflags;
+ uint32 displayfrequency;
+ uint32 icmmethod;
+ uint32 icmintent;
+ uint32 mediatype;
+ uint32 dithertype;
+ uint32 reserved1;
+ uint32 reserved2;
+ uint32 panningwidth;
+ uint32 panningheight;
+ uint8 *private;
+} NT_DEVICEMODE;
+
+typedef struct nt_printer_info_level_2
+{
+ uint32 attributes;
+ uint32 priority;
+ uint32 default_priority;
+ uint32 starttime;
+ uint32 untiltime;
+ uint32 status;
+ uint32 cjobs;
+ uint32 averageppm;
+ fstring servername;
+ fstring printername;
+ fstring sharename;
+ fstring portname;
+ fstring drivername;
+ fstring comment;
+ fstring location;
+ NT_DEVICEMODE *devmode;
+ fstring sepfile;
+ fstring printprocessor;
+ fstring datatype;
+ fstring parameters;
+ NT_PRINTER_PARAM *specific;
+ /* SEC_DESC_BUF *secdesc; */
+ /* not used but ... and how ??? */
+} NT_PRINTER_INFO_LEVEL_2;
+
+typedef struct nt_printer_info_level
+{
+ NT_PRINTER_INFO_LEVEL_2 *info_2;
+} NT_PRINTER_INFO_LEVEL;
+
+
--- /dev/null
+/*
+ Unix SMB/Netbios implementation.
+ Version 1.9.
+ SMB parameters and setup
+ Copyright (C) Andrew Tridgell 1992-1998
+ Copyright (C) Luke Kenneth Casson Leighton 1996-1998
+ Copyright (C) Jean Francois Micouleau 1998
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _RPC_SPOOLSS_H /* _RPC_SPOOLSS_H */
+#define _RPC_SPOOLSS_H
+
+#define INTEGER 1
+#define STRING 2
+
+/* spoolss pipe: this are the calls which are not implemented ...
+#define SPOOLSS_OPENPRINTER 0x01
+#define SPOOLSS_GETJOB 0x03
+#define SPOOLSS_DELETEPRINTER 0x06
+#define SPOOLSS_GETPRINTERDRIVER 0x0b
+#define SPOOLSS_DELETEPRINTERDRIVER 0x0d
+#define SPOOLSS_ADDPRINTPROCESSOR 0x0e
+#define SPOOLSS_GETPRINTPROCESSORDIRECTORY 0x10
+#define SPOOLSS_ABORTPRINTER 0x15
+#define SPOOLSS_READPRINTER 0x16
+#define SPOOLSS_WAITFORPRINTERCHANGE 0x1c
+#define SPOOLSS_ADDFORM 0x1e
+#define SPOOLSS_DELETEFORM 0x1f
+#define SPOOLSS_GETFORM 0x20
+#define SPOOLSS_SETFORM 0x21
+#define SPOOLSS_ENUMMONITORS 0x24
+#define SPOOLSS_ADDPORT 0x25
+#define SPOOLSS_CONFIGUREPORT 0x26
+#define SPOOLSS_DELETEPORT 0x27
+#define SPOOLSS_CREATEPRINTERIC 0x28
+#define SPOOLSS_PLAYGDISCRIPTONPRINTERIC 0x29
+#define SPOOLSS_DELETEPRINTERIC 0x2a
+#define SPOOLSS_ADDPRINTERCONNECTION 0x2b
+#define SPOOLSS_DELETEPRINTERCONNECTION 0x2c
+#define SPOOLSS_PRINTERMESSAGEBOX 0x2d
+#define SPOOLSS_ADDMONITOR 0x2e
+#define SPOOLSS_DELETEMONITOR 0x2f
+#define SPOOLSS_DELETEPRINTPROCESSOR 0x30
+#define SPOOLSS_ADDPRINTPROVIDOR 0x31
+#define SPOOLSS_DELETEPRINTPROVIDOR 0x32
+#define SPOOLSS_RESETPRINTER 0x34
+#define SPOOLSS_FINDFIRSTPRINTERCHANGENOTIFICATION 0x36
+#define SPOOLSS_FINDNEXTPRINTERCHANGENOTIFICATION 0x37
+#define SPOOLSS_ROUTERFINDFIRSTPRINTERNOTIFICATIONOLD 0x39
+#define SPOOLSS_REPLYOPENPRINTER 0x3a
+#define SPOOLSS_ROUTERREPLYPRINTER 0x3b
+#define SPOOLSS_REPLYCLOSEPRINTER 0x3c
+#define SPOOLSS_ADDPORTEX 0x3d
+#define SPOOLSS_REMOTEFINDFIRSTPRINTERCHANGENOTIFICATION0x3e
+#define SPOOLSS_SPOOLERINIT 0x3f
+#define SPOOLSS_RESETPRINTEREX 0x40
+#define SPOOLSS_ROUTERREFRESHPRINTERCHANGENOTIFICATION 0x42
+*/
+
+/* those are implemented */
+
+#define SPOOLSS_ENUMPRINTERS 0x00
+#define SPOOLSS_SETJOB 0x02
+#define SPOOLSS_ENUMJOBS 0x04
+#define SPOOLSS_ADDPRINTER 0x05
+#define SPOOLSS_SETPRINTER 0x07
+#define SPOOLSS_GETPRINTER 0x08
+#define SPOOLSS_ADDPRINTERDRIVER 0x09
+#define SPOOLSS_ENUMPRINTERDRIVERS 0x0a
+#define SPOOLSS_GETPRINTERDRIVERDIRECTORY 0x0c
+#define SPOOLSS_ENUMPRINTPROCESSORS 0x0f
+#define SPOOLSS_STARTDOCPRINTER 0x11
+#define SPOOLSS_STARTPAGEPRINTER 0x12
+#define SPOOLSS_WRITEPRINTER 0x13
+#define SPOOLSS_ENDPAGEPRINTER 0x14
+#define SPOOLSS_ENDDOCPRINTER 0x17
+#define SPOOLSS_ADDJOB 0x18
+#define SPOOLSS_SCHEDULEJOB 0x19
+#define SPOOLSS_GETPRINTERDATA 0x1a
+#define SPOOLSS_SETPRINTERDATA 0x1b
+#define SPOOLSS_CLOSEPRINTER 0x1d
+#define SPOOLSS_ENUMFORMS 0x22
+#define SPOOLSS_ENUMPORTS 0x23
+#define SPOOLSS_ENUMPRINTPROCESSORDATATYPES 0x33
+#define SPOOLSS_GETPRINTERDRIVER2 0x35
+/* find close printer notification */
+#define SPOOLSS_FCPN 0x38
+/* remote find first printer change notifyEx */
+#define SPOOLSS_RFFPCNEX 0x41
+/* remote find next printer change notifyEx */
+#define SPOOLSS_RFNPCNEX 0x43
+#define SPOOLSS_OPENPRINTEREX 0x45
+#define SPOOLSS_ADDPRINTEREX 0x46
+#define SPOOLSS_ENUMPRINTERDATA 0x48
+
+
+#define SERVER_ACCESS_ADMINISTER 0x00000001
+#define SERVER_ACCESS_ENUMERATE 0x00000002
+
+#define PRINTER_ACCESS_ADMINISTER 0x00000004
+#define PRINTER_ACCESS_USE 0x00000008
+
+#define PRINTER_CONTROL_UNPAUSE 0x00000000
+#define PRINTER_CONTROL_PAUSE 0x00000001
+#define PRINTER_CONTROL_RESUME 0x00000002
+#define PRINTER_CONTROL_PURGE 0x00000003
+#define PRINTER_CONTROL_SET_STATUS 0x00000004
+
+#define PRINTER_STATUS_PAUSED 0x00000001
+#define PRINTER_STATUS_ERROR 0x00000002
+#define PRINTER_STATUS_PENDING_DELETION 0x00000004
+#define PRINTER_STATUS_PAPER_JAM 0x00000008
+
+#define PRINTER_STATUS_PAPER_OUT 0x00000010
+#define PRINTER_STATUS_MANUAL_FEED 0x00000020
+#define PRINTER_STATUS_PAPER_PROBLEM 0x00000040
+#define PRINTER_STATUS_OFFLINE 0x00000080
+
+#define PRINTER_STATUS_IO_ACTIVE 0x00000100
+#define PRINTER_STATUS_BUSY 0x00000200
+#define PRINTER_STATUS_PRINTING 0x00000400
+#define PRINTER_STATUS_OUTPUT_BIN_FULL 0x00000800
+
+#define PRINTER_STATUS_NOT_AVAILABLE 0x00001000
+#define PRINTER_STATUS_WAITING 0x00002000
+#define PRINTER_STATUS_PROCESSING 0x00004000
+#define PRINTER_STATUS_INITIALIZING 0x00008000
+
+#define PRINTER_STATUS_WARMING_UP 0x00010000
+#define PRINTER_STATUS_TONER_LOW 0x00020000
+#define PRINTER_STATUS_NO_TONER 0x00040000
+#define PRINTER_STATUS_PAGE_PUNT 0x00080000
+
+#define PRINTER_STATUS_USER_INTERVENTION 0x00100000
+#define PRINTER_STATUS_OUT_OF_MEMORY 0x00200000
+#define PRINTER_STATUS_DOOR_OPEN 0x00400000
+#define PRINTER_STATUS_SERVER_UNKNOWN 0x00800000
+
+#define PRINTER_STATUS_POWER_SAVE 0x01000000
+
+#define JOB_ACCESS_ADMINISTER 0x00000010
+
+#define STANDARD_RIGHTS_READ 0x00020000
+#define STANDARD_RIGHTS_WRITE STANDARD_RIGHTS_READ
+#define STANDARD_RIGHTS_EXECUTE STANDARD_RIGHTS_READ
+#define STANDARD_RIGHTS_REQUIRED 0x000F0000
+
+/* Access rights for print servers */
+#define SERVER_ALL_ACCESS STANDARD_RIGHTS_REQUIRED|SERVER_ACCESS_ADMINISTER|SERVER_ACCESS_ENUMERATE
+#define SERVER_READ STANDARD_RIGHTS_READ|SERVER_ACCESS_ENUMERATE
+#define SERVER_WRITE STANDARD_RIGHTS_WRITE|SERVER_ACCESS_ADMINISTER|SERVER_ACCESS_ENUMERATE
+#define SERVER_EXECUTE STANDARD_RIGHTS_EXECUTE|SERVER_ACCESS_ENUMERATE
+
+/* Access rights for printers */
+#define PRINTER_ALL_ACCESS STANDARD_RIGHTS_REQUIRED|PRINTER_ACCESS_ADMINISTER|PRINTER_ACCESS_USE
+#define PRINTER_READ STANDARD_RIGHTS_READ|PRINTER_ACCESS_USE
+#define PRINTER_WRITE STANDARD_RIGHTS_WRITE|PRINTER_ACCESS_USE
+#define PRINTER_EXECUTE STANDARD_RIGHTS_EXECUTE|PRINTER_ACCESS_USE
+
+/* Access rights for jobs */
+#define JOB_ALL_ACCESS STANDARD_RIGHTS_REQUIRED|JOB_ACCESS_ADMINISTER
+#define JOB_READ STANDARD_RIGHTS_READ|JOB_ACCESS_ADMINISTER
+#define JOB_WRITE STANDARD_RIGHTS_WRITE|JOB_ACCESS_ADMINISTER
+#define JOB_EXECUTE STANDARD_RIGHTS_EXECUTE|JOB_ACCESS_ADMINISTER
+
+#define PRINTER_HND_SIZE 20
+
+#define ONE_VALUE 01
+#define TWO_VALUE 02
+#define POINTER 03
+
+#define PRINTER_NOTIFY_TYPE 0x00
+#define JOB_NOTIFY_TYPE 0x01
+
+#define MAX_PRINTER_NOTIFY 26
+
+#define PRINTER_NOTIFY_SERVER_NAME 0x00
+#define PRINTER_NOTIFY_PRINTER_NAME 0x01
+#define PRINTER_NOTIFY_SHARE_NAME 0x02
+#define PRINTER_NOTIFY_PORT_NAME 0x03
+#define PRINTER_NOTIFY_DRIVER_NAME 0x04
+#define PRINTER_NOTIFY_COMMENT 0x05
+#define PRINTER_NOTIFY_LOCATION 0x06
+#define PRINTER_NOTIFY_DEVMODE 0x07
+#define PRINTER_NOTIFY_SEPFILE 0x08
+#define PRINTER_NOTIFY_PRINT_PROCESSOR 0x09
+#define PRINTER_NOTIFY_PARAMETERS 0x0A
+#define PRINTER_NOTIFY_DATATYPE 0x0B
+#define PRINTER_NOTIFY_SECURITY_DESCRIPTOR 0x0C
+#define PRINTER_NOTIFY_ATTRIBUTES 0x0D
+#define PRINTER_NOTIFY_PRIORITY 0x0E
+#define PRINTER_NOTIFY_DEFAULT_PRIORITY 0x0F
+#define PRINTER_NOTIFY_START_TIME 0x10
+#define PRINTER_NOTIFY_UNTIL_TIME 0x11
+#define PRINTER_NOTIFY_STATUS 0x12
+#define PRINTER_NOTIFY_STATUS_STRING 0x13
+#define PRINTER_NOTIFY_CJOBS 0x14
+#define PRINTER_NOTIFY_AVERAGE_PPM 0x15
+#define PRINTER_NOTIFY_TOTAL_PAGES 0x16
+#define PRINTER_NOTIFY_PAGES_PRINTED 0x17
+#define PRINTER_NOTIFY_TOTAL_BYTES 0x18
+#define PRINTER_NOTIFY_BYTES_PRINTED 0x19
+
+#define MAX_JOB_NOTIFY 24
+
+#define JOB_NOTIFY_PRINTER_NAME 0x00
+#define JOB_NOTIFY_MACHINE_NAME 0x01
+#define JOB_NOTIFY_PORT_NAME 0x02
+#define JOB_NOTIFY_USER_NAME 0x03
+#define JOB_NOTIFY_NOTIFY_NAME 0x04
+#define JOB_NOTIFY_DATATYPE 0x05
+#define JOB_NOTIFY_PRINT_PROCESSOR 0x06
+#define JOB_NOTIFY_PARAMETERS 0x07
+#define JOB_NOTIFY_DRIVER_NAME 0x08
+#define JOB_NOTIFY_DEVMODE 0x09
+#define JOB_NOTIFY_STATUS 0x0A
+#define JOB_NOTIFY_STATUS_STRING 0x0B
+#define JOB_NOTIFY_SECURITY_DESCRIPTOR 0x0C
+#define JOB_NOTIFY_DOCUMENT 0x0D
+#define JOB_NOTIFY_PRIORITY 0x0E
+#define JOB_NOTIFY_POSITION 0x0F
+#define JOB_NOTIFY_SUBMITTED 0x10
+#define JOB_NOTIFY_START_TIME 0x11
+#define JOB_NOTIFY_UNTIL_TIME 0x12
+#define JOB_NOTIFY_TIME 0x13
+#define JOB_NOTIFY_TOTAL_PAGES 0x14
+#define JOB_NOTIFY_PAGES_PRINTED 0x15
+#define JOB_NOTIFY_TOTAL_BYTES 0x16
+#define JOB_NOTIFY_BYTES_PRINTED 0x17
+
+/*
+ * The printer attributes.
+ * I #defined all of them (grabbed form MSDN)
+ * I'm only using:
+ * ( SHARED | NETWORK | RAW_ONLY )
+ * RAW_ONLY _MUST_ be present otherwise NT will send an EMF file
+ */
+
+#define PRINTER_ATTRIBUTE_QUEUED 0x00000001
+#define PRINTER_ATTRIBUTE_DIRECT 0x00000002
+#define PRINTER_ATTRIBUTE_DEFAULT 0x00000004
+#define PRINTER_ATTRIBUTE_SHARED 0x00000008
+
+#define PRINTER_ATTRIBUTE_NETWORK 0x00000010
+#define PRINTER_ATTRIBUTE_HIDDEN 0x00000020
+#define PRINTER_ATTRIBUTE_LOCAL 0x00000040
+#define PRINTER_ATTRIBUTE_ENABLE_DEVQ 0x00000080
+
+#define PRINTER_ATTRIBUTE_KEEPPRINTEDJOBS 0x00000100
+#define PRINTER_ATTRIBUTE_DO_COMPLETE_FIRST 0x00000200
+#define PRINTER_ATTRIBUTE_WORK_OFFLINE 0x00000400
+#define PRINTER_ATTRIBUTE_ENABLE_BIDI 0x00000800
+
+#define PRINTER_ATTRIBUTE_RAW_ONLY 0x00001000
+
+#define NO_PRIORITY 0
+#define MAX_PRIORITY 99
+#define MIN_PRIORITY 1
+#define DEF_PRIORITY 1
+
+#define PRINTER_ENUM_DEFAULT 0x00000001
+#define PRINTER_ENUM_LOCAL 0x00000002
+#define PRINTER_ENUM_CONNECTIONS 0x00000004
+#define PRINTER_ENUM_FAVORITE 0x00000004
+#define PRINTER_ENUM_NAME 0x00000008
+#define PRINTER_ENUM_REMOTE 0x00000010
+#define PRINTER_ENUM_SHARED 0x00000020
+#define PRINTER_ENUM_NETWORK 0x00000040
+
+#define PRINTER_ENUM_EXPAND 0x00004000
+#define PRINTER_ENUM_CONTAINER 0x00008000
+
+#define PRINTER_ENUM_ICONMASK 0x00ff0000
+#define PRINTER_ENUM_ICON1 0x00010000
+#define PRINTER_ENUM_ICON2 0x00020000
+#define PRINTER_ENUM_ICON3 0x00040000
+#define PRINTER_ENUM_ICON4 0x00080000
+#define PRINTER_ENUM_ICON5 0x00100000
+#define PRINTER_ENUM_ICON6 0x00200000
+#define PRINTER_ENUM_ICON7 0x00400000
+#define PRINTER_ENUM_ICON8 0x00800000
+
+typedef struct
+{
+ char name[100];
+ uint32 flag;
+ uint32 width;
+ uint32 length;
+ uint32 left;
+ uint32 top;
+ uint32 right;
+ uint32 bottom;
+} nt_forms_struct;
+
+typedef struct
+{
+ char name[100];
+ char architecture[100];
+ uint32 version;
+ char default_form[30];
+ uint32 color_flag;
+ char driver[100];
+ char datafile[100];
+ char configfile[100];
+ char helpfile[100];
+ char monitor[100];
+ char monitor_name[100];
+ char **dependant;
+} nt_drivers_struct;
+
+typedef struct devicemode
+{
+ UNISTR devicename;
+ uint16 specversion;
+ uint16 driverversion;
+ uint16 size;
+ uint16 driverextra;
+ uint32 fields;
+ uint16 orientation;
+ uint16 papersize;
+ uint16 paperlength;
+ uint16 paperwidth;
+ uint16 scale;
+ uint16 copies;
+ uint16 defaultsource;
+ uint16 printquality;
+ uint16 color;
+ uint16 duplex;
+ uint16 yresolution;
+ uint16 ttoption;
+ uint16 collate;
+ UNISTR formname;
+ uint16 logpixels;
+ uint32 bitsperpel;
+ uint32 pelswidth;
+ uint32 pelsheight;
+ uint32 displayflags;
+ uint32 displayfrequency;
+ uint32 icmmethod;
+ uint32 icmintent;
+ uint32 mediatype;
+ uint32 dithertype;
+ uint32 reserved1;
+ uint32 reserved2;
+ uint32 panningwidth;
+ uint32 panningheight;
+ uint8 *private;
+} DEVICEMODE;
+
+typedef struct devicemode_container
+{
+ DEVICEMODE *dm;
+ uint8 *buffer;
+ uint32 size_of_buffer;
+} DEVICEMODE_CONTAINER;
+
+#define ORIENTATION 0x00000001L
+#define PAPERSIZE 0x00000002L
+#define PAPERLENGTH 0x00000004L
+#define PAPERWIDTH 0x00000008L
+#define SCALE 0x00000010L
+#define COPIES 0x00000100L
+#define DEFAULTSOURCE 0x00000200L
+#define PRINTQUALITY 0x00000400L
+#define COLOR 0x00000800L
+#define DUPLEX 0x00001000L
+#define YRESOLUTION 0x00002000L
+#define TTOPTION 0x00004000L
+#define COLLATE 0x00008000L
+#define FORMNAME 0x00010000L
+#define LOGPIXELS 0x00020000L
+#define BITSPERPEL 0x00040000L
+#define PELSWIDTH 0x00080000L
+#define PELSHEIGHT 0x00100000L
+#define DISPLAYFLAGS 0x00200000L
+#define DISPLAYFREQUENCY 0x00400000L
+#define PANNINGWIDTH 0x00800000L
+#define PANNINGHEIGHT 0x01000000L
+
+#define ORIENT_PORTRAIT 1
+#define ORIENT_LANDSCAPE 2
+
+#define PAPER_FIRST PAPER_LETTER
+#define PAPER_LETTER 1 /* Letter 8 1/2 x 11 in */
+#define PAPER_LETTERSMALL 2 /* Letter Small 8 1/2 x 11 in */
+#define PAPER_TABLOID 3 /* Tabloid 11 x 17 in */
+#define PAPER_LEDGER 4 /* Ledger 17 x 11 in */
+#define PAPER_LEGAL 5 /* Legal 8 1/2 x 14 in */
+#define PAPER_STATEMENT 6 /* Statement 5 1/2 x 8 1/2 in */
+#define PAPER_EXECUTIVE 7 /* Executive 7 1/4 x 10 1/2 in */
+#define PAPER_A3 8 /* A3 297 x 420 mm */
+#define PAPER_A4 9 /* A4 210 x 297 mm */
+#define PAPER_A4SMALL 10 /* A4 Small 210 x 297 mm */
+#define PAPER_A5 11 /* A5 148 x 210 mm */
+#define PAPER_B4 12 /* B4 (JIS) 250 x 354 */
+#define PAPER_B5 13 /* B5 (JIS) 182 x 257 mm */
+#define PAPER_FOLIO 14 /* Folio 8 1/2 x 13 in */
+#define PAPER_QUARTO 15 /* Quarto 215 x 275 mm */
+#define PAPER_10X14 16 /* 10x14 in */
+#define PAPER_11X17 17 /* 11x17 in */
+#define PAPER_NOTE 18 /* Note 8 1/2 x 11 in */
+#define PAPER_ENV_9 19 /* Envelope #9 3 7/8 x 8 7/8 */
+#define PAPER_ENV_10 20 /* Envelope #10 4 1/8 x 9 1/2 */
+#define PAPER_ENV_11 21 /* Envelope #11 4 1/2 x 10 3/8 */
+#define PAPER_ENV_12 22 /* Envelope #12 4 \276 x 11 */
+#define PAPER_ENV_14 23 /* Envelope #14 5 x 11 1/2 */
+#define PAPER_CSHEET 24 /* C size sheet */
+#define PAPER_DSHEET 25 /* D size sheet */
+#define PAPER_ESHEET 26 /* E size sheet */
+#define PAPER_ENV_DL 27 /* Envelope DL 110 x 220mm */
+#define PAPER_ENV_C5 28 /* Envelope C5 162 x 229 mm */
+#define PAPER_ENV_C3 29 /* Envelope C3 324 x 458 mm */
+#define PAPER_ENV_C4 30 /* Envelope C4 229 x 324 mm */
+#define PAPER_ENV_C6 31 /* Envelope C6 114 x 162 mm */
+#define PAPER_ENV_C65 32 /* Envelope C65 114 x 229 mm */
+#define PAPER_ENV_B4 33 /* Envelope B4 250 x 353 mm */
+#define PAPER_ENV_B5 34 /* Envelope B5 176 x 250 mm */
+#define PAPER_ENV_B6 35 /* Envelope B6 176 x 125 mm */
+#define PAPER_ENV_ITALY 36 /* Envelope 110 x 230 mm */
+#define PAPER_ENV_MONARCH 37 /* Envelope Monarch 3.875 x 7.5 in */
+#define PAPER_ENV_PERSONAL 38 /* 6 3/4 Envelope 3 5/8 x 6 1/2 in */
+#define PAPER_FANFOLD_US 39 /* US Std Fanfold 14 7/8 x 11 in */
+#define PAPER_FANFOLD_STD_GERMAN 40 /* German Std Fanfold 8 1/2 x 12 in */
+#define PAPER_FANFOLD_LGL_GERMAN 41 /* German Legal Fanfold 8 1/2 x 13 in */
+
+#define PAPER_LAST PAPER_FANFOLD_LGL_GERMAN
+#define PAPER_USER 256
+
+#define BIN_FIRST BIN_UPPER
+#define BIN_UPPER 1
+#define BIN_ONLYONE 1
+#define BIN_LOWER 2
+#define BIN_MIDDLE 3
+#define BIN_MANUAL 4
+#define BIN_ENVELOPE 5
+#define BIN_ENVMANUAL 6
+#define BIN_AUTO 7
+#define BIN_TRACTOR 8
+#define BIN_SMALLFMT 9
+#define BIN_LARGEFMT 10
+#define BIN_LARGECAPACITY 11
+#define BIN_CASSETTE 14
+#define BIN_FORMSOURCE 15
+#define BIN_LAST BIN_FORMSOURCE
+
+#define BIN_USER 256 /* device specific bins start here */
+
+#define RES_DRAFT (-1)
+#define RES_LOW (-2)
+#define RES_MEDIUM (-3)
+#define RES_HIGH (-4)
+
+#define COLOR_MONOCHROME 1
+#define COLOR_COLOR 2
+
+#define DUP_SIMPLEX 1
+#define DUP_VERTICAL 2
+#define DUP_HORIZONTAL 3
+
+#define TT_BITMAP 1 /* print TT fonts as graphics */
+#define TT_DOWNLOAD 2 /* download TT fonts as soft fonts */
+#define TT_SUBDEV 3 /* substitute device fonts for TT fonts */
+
+#define COLLATE_FALSE 0
+#define COLLATE_TRUE 1
+
+#define ERROR_INVALID_HANDLE 6
+#define ERROR_INVALID_PARAMETER 87
+#define ERROR_INSUFFICIENT_BUFFER 122
+
+typedef struct s_header_type
+{
+ uint32 type;
+ union
+ {
+ uint32 value;
+ UNISTR string;
+ } data;
+} HEADER_TYPE;
+
+typedef struct s_buffer
+{
+ uint32 ptr;
+ uint32 size;
+ uint32 count;
+ uint8 *data;
+ HEADER_TYPE *header;
+} BUFFER;
+
+
+/* PRINTER_HND */
+typedef struct printer_policy_info
+{
+ uint8 data[PRINTER_HND_SIZE]; /* printer handle */
+} PRINTER_HND;
+
+/* SPOOL_Q_OPEN_PRINTER request to open a printer */
+typedef struct spool_q_open_printer
+{
+ uint32 unknown0;
+ UNISTR2 printername;
+ uint32 unknown1;
+ uint32 cbbuf;
+ uint32 devmod;
+ uint32 access_required;
+ uint32 unknown2; /* 0x0000 0001 */
+ uint32 unknown3; /* 0x0000 0001 */
+ uint32 unknown4; /* ??? */
+ uint32 unknown5; /* 0x0000 001c */
+ uint32 unknown6; /* ??? */
+ uint32 unknown7; /* ??? */
+ uint32 unknown8; /* 0x0000 0565 */
+ uint32 unknown9; /* 0x0000 0002 */
+ uint32 unknown10; /* 0x0000 0000 */
+ uint32 unknown11; /* ??? */
+ UNISTR2 station;
+ UNISTR2 username;
+} SPOOL_Q_OPEN_PRINTER;
+
+/* SPOOL_Q_OPEN_PRINTER reply to an open printer */
+typedef struct spool_r_open_printer
+{
+ PRINTER_HND handle; /* handle used along all transactions (20*uint8) */
+ uint32 status;
+} SPOOL_R_OPEN_PRINTER;
+
+typedef struct spool_q_getprinterdata
+{
+ PRINTER_HND handle;
+ UNISTR2 valuename;
+ uint32 size;
+} SPOOL_Q_GETPRINTERDATA;
+
+typedef struct spool_r_getprinterdata
+{
+ uint32 type;
+ uint32 size;
+ uint8 *data;
+ uint32 numeric_data;
+ uint32 needed;
+ uint32 status;
+} SPOOL_R_GETPRINTERDATA;
+
+typedef struct spool_q_closeprinter
+{
+ PRINTER_HND handle;
+} SPOOL_Q_CLOSEPRINTER;
+
+typedef struct spool_r_closeprinter
+{
+ PRINTER_HND handle;
+ uint32 status;
+} SPOOL_R_CLOSEPRINTER;
+
+typedef struct spool_q_startpageprinter
+{
+ PRINTER_HND handle;
+} SPOOL_Q_STARTPAGEPRINTER;
+
+typedef struct spool_r_startpageprinter
+{
+ uint32 status;
+} SPOOL_R_STARTPAGEPRINTER;
+
+typedef struct spool_q_endpageprinter
+{
+ PRINTER_HND handle;
+} SPOOL_Q_ENDPAGEPRINTER;
+
+typedef struct spool_r_endpageprinter
+{
+ uint32 status;
+} SPOOL_R_ENDPAGEPRINTER;
+
+typedef struct spool_doc_info_1
+{
+ uint32 p_docname;
+ uint32 p_outputfile;
+ uint32 p_datatype;
+ UNISTR2 docname;
+ UNISTR2 outputfile;
+ UNISTR2 datatype;
+} DOC_INFO_1;
+
+typedef struct spool_doc_info
+{
+ uint32 switch_value;
+ DOC_INFO_1 doc_info_1;
+} DOC_INFO;
+
+typedef struct spool_doc_info_container
+{
+ uint32 level;
+ DOC_INFO docinfo;
+} DOC_INFO_CONTAINER;
+
+typedef struct spool_q_startdocprinter
+{
+ PRINTER_HND handle;
+ DOC_INFO_CONTAINER doc_info_container;
+} SPOOL_Q_STARTDOCPRINTER;
+
+typedef struct spool_r_startdocprinter
+{
+ uint32 jobid;
+ uint32 status;
+} SPOOL_R_STARTDOCPRINTER;
+
+typedef struct spool_q_enddocprinter
+{
+ PRINTER_HND handle;
+} SPOOL_Q_ENDDOCPRINTER;
+
+typedef struct spool_r_enddocprinter
+{
+ uint32 status;
+} SPOOL_R_ENDDOCPRINTER;
+
+typedef struct spool_q_writeprinter
+{
+ PRINTER_HND handle;
+ uint32 buffer_size;
+ uint8 *buffer;
+ uint32 buffer_size2;
+} SPOOL_Q_WRITEPRINTER;
+
+typedef struct spool_r_writeprinter
+{
+ uint32 buffer_written;
+ uint32 status;
+} SPOOL_R_WRITEPRINTER;
+
+typedef struct spool_notify_option_type
+{
+ uint16 type;
+ uint16 reserved0;
+ uint32 reserved1;
+ uint32 reserved2;
+ uint32 count;
+ uint16 fields[16];
+} SPOOL_NOTIFY_OPTION_TYPE;
+
+typedef struct spool_notify_option
+{
+ uint32 version;
+ uint32 reserved;
+ uint32 count;
+ SPOOL_NOTIFY_OPTION_TYPE type[16]; /* totally arbitrary !!! */
+} SPOOL_NOTIFY_OPTION;
+
+typedef struct spool_notify_info_data
+{
+ uint16 type;
+ uint16 field;
+ uint32 reserved;
+ uint32 id;
+ union
+ {
+ uint32 value[2];
+ struct
+ {
+ uint32 length;
+ uint16 string[1024];
+ } data;
+ } notify_data;
+ uint32 size;
+ BOOL enc_type;
+} SPOOL_NOTIFY_INFO_DATA;
+
+typedef struct spool_notify_info
+{
+ uint32 version;
+ uint32 flags;
+ uint32 count;
+ SPOOL_NOTIFY_INFO_DATA data[26*16];
+ /* 26 differents data types */
+ /* so size it for 16 printers at max */
+ /* jfmxxxx: Have to make it dynamic !!!*/
+} SPOOL_NOTIFY_INFO;
+
+/* If the struct name looks obscure, yes it is ! */
+/* RemoteFindFirstPrinterChangeNotificationEx query struct */
+typedef struct spoolss_q_rffpcnex
+{
+ PRINTER_HND handle;
+ uint32 flags;
+ uint32 options;
+ UNISTR2 localmachine;
+ uint32 printerlocal;
+ SPOOL_NOTIFY_OPTION option;
+} SPOOL_Q_RFFPCNEX;
+
+typedef struct spool_r_rffpcnex
+{
+ uint32 status;
+} SPOOL_R_RFFPCNEX;
+
+/* Remote Find Next Printer Change Notify Ex */
+typedef struct spool_q_rfnpcnex
+{
+ PRINTER_HND handle;
+ uint32 change;
+ SPOOL_NOTIFY_OPTION option;
+} SPOOL_Q_RFNPCNEX;
+
+typedef struct spool_r_rfnpcnex
+{
+ uint32 count;
+ SPOOL_NOTIFY_INFO info;
+} SPOOL_R_RFNPCNEX;
+
+/* Find Close Printer Notify */
+typedef struct spool_q_fcpn
+{
+ PRINTER_HND handle;
+} SPOOL_Q_FCPN;
+
+typedef struct spool_r_fcpn
+{
+ uint32 status;
+} SPOOL_R_FCPN;
+
+
+typedef struct printer_info_0
+{
+ UNISTR printername;
+ UNISTR servername;
+ uint32 cjobs;
+ uint32 attributes;
+ uint32 unknown0;
+ uint32 unknown1;
+ uint32 unknown2;
+ uint32 unknown3;
+ uint32 unknown4;
+ uint32 unknown5;
+ uint32 unknown6;
+ uint16 majorversion;
+ uint16 buildversion;
+ uint32 unknown7;
+ uint32 unknown8;
+ uint32 unknown9;
+ uint32 unknown10;
+ uint32 unknown11;
+ uint32 unknown12;
+ uint32 unknown13;
+ uint32 unknown14;
+ uint32 unknown15;
+ uint32 unknown16;
+ uint32 unknown17;
+ uint32 unknown18;
+ uint32 status;
+ uint32 unknown20;
+ uint32 unknown21;
+ uint16 unknown22;
+ uint32 unknown23;
+} PRINTER_INFO_0;
+
+typedef struct printer_info_1
+{
+ uint32 flags;
+ UNISTR description;
+ UNISTR name;
+ UNISTR comment;
+} PRINTER_INFO_1;
+
+typedef struct printer_info_2
+{
+ UNISTR servername;
+ UNISTR printername;
+ UNISTR sharename;
+ UNISTR portname;
+ UNISTR drivername;
+ UNISTR comment;
+ UNISTR location;
+ DEVICEMODE *devmode;
+ UNISTR sepfile;
+ UNISTR printprocessor;
+ UNISTR datatype;
+ UNISTR parameters;
+ /*SECURITY_DESCRIPTOR securitydescriptor;*/
+ uint32 attributes;
+ uint32 priority;
+ uint32 defaultpriority;
+ uint32 starttime;
+ uint32 untiltime;
+ uint32 status;
+ uint32 cjobs;
+ uint32 averageppm;
+} PRINTER_INFO_2;
+
+typedef struct spool_q_enumprinters
+{
+ uint32 flags;
+ UNISTR2 servername;
+ uint32 level;
+ BUFFER buffer;
+/* uint32 buf_size;*/
+} SPOOL_Q_ENUMPRINTERS;
+
+typedef struct spool_r_enumprinters
+{
+ uint32 offered; /* number of bytes offered */
+ uint32 needed; /* bytes needed */
+ uint32 returned; /* number of printers */
+ uint32 status;
+ uint32 level;
+ UNISTR servername;
+ union {
+ PRINTER_INFO_1 **printers_1;
+ PRINTER_INFO_2 **printers_2;
+ } printer;
+} SPOOL_R_ENUMPRINTERS;
+
+
+typedef struct spool_q_getprinter
+{
+ PRINTER_HND handle;
+ uint32 level;
+ uint32 offered;
+} SPOOL_Q_GETPRINTER;
+
+typedef struct spool_r_getprinter
+{
+ PRINTER_HND handle;
+ uint32 level;
+
+ uint32 offered;
+ uint32 needed;
+ uint32 status;
+ union {
+ PRINTER_INFO_0 *info0;
+ PRINTER_INFO_1 *info1;
+ PRINTER_INFO_2 *info2;
+ } printer;
+} SPOOL_R_GETPRINTER;
+
+struct s_notify_info_data_table
+{
+ uint16 type;
+ uint16 field;
+ char *name;
+ uint32 size;
+ void (*fn) (int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer);
+};
+
+typedef struct spool_q_getprinterdriver2
+{
+ PRINTER_HND handle;
+ UNISTR2 architecture;
+ uint32 level;
+ BUFFER buffer;
+ uint32 buf_size;
+ uint32 status;
+} SPOOL_Q_GETPRINTERDRIVER2;
+
+typedef struct driver_info_1
+{
+ UNISTR name;
+} DRIVER_INFO_1;
+
+typedef struct driver_info_2
+{
+ uint32 version;
+ UNISTR name;
+ UNISTR architecture;
+ UNISTR driverpath;
+ UNISTR datafile;
+ UNISTR configfile;
+} DRIVER_INFO_2;
+
+typedef struct driver_info_3
+{
+ uint32 version;
+ UNISTR name;
+ UNISTR architecture;
+ UNISTR driverpath;
+ UNISTR datafile;
+ UNISTR configfile;
+ UNISTR helpfile;
+ UNISTR dependentfiles;
+ UNISTR monitorname;
+ UNISTR defaultdatatype;
+} DRIVER_INFO_3;
+
+typedef struct spool_r_getprinterdriver2
+{
+ uint32 needed;
+ uint32 offered;
+ uint32 returned;
+ uint32 status;
+ uint32 level;
+ union {
+ DRIVER_INFO_1 *info1;
+ DRIVER_INFO_2 *info2;
+ DRIVER_INFO_3 *info3;
+ } printer;
+} SPOOL_R_GETPRINTERDRIVER2;
+
+typedef struct add_jobinfo_1
+{
+ UNISTR path;
+ uint32 job_number;
+} ADD_JOBINFO_1;
+
+
+typedef struct spool_q_addjob
+{
+ PRINTER_HND handle;
+ uint32 level;
+ BUFFER buffer;
+ uint32 buf_size;
+} SPOOL_Q_ADDJOB;
+
+typedef struct spool_r_addjob
+{
+ uint32 status;
+} SPOOL_R_ADDJOB;
+
+/*
+ * I'm really wondering how many different time formats
+ * I will have to cope with
+ *
+ * JFM, 09/13/98 In a mad mood ;-(
+*/
+typedef struct systemtime
+{
+ uint16 year;
+ uint16 month;
+ uint16 dayofweek;
+ uint16 day;
+ uint16 hour;
+ uint16 minute;
+ uint16 second;
+ uint16 milliseconds;
+} SYSTEMTIME;
+
+typedef struct s_job_info_1
+{
+ uint32 jobid;
+ UNISTR printername;
+ UNISTR machinename;
+ UNISTR username;
+ UNISTR document;
+ UNISTR datatype;
+ UNISTR text_status;
+ uint32 status;
+ uint32 priority;
+ uint32 position;
+ uint32 totalpages;
+ uint32 pagesprinted;
+ SYSTEMTIME submitted;
+} JOB_INFO_1;
+
+typedef struct s_job_info_2
+{
+ uint32 jobid;
+ UNISTR printername;
+ UNISTR machinename;
+ UNISTR username;
+ UNISTR document;
+ UNISTR notifyname;
+ UNISTR datatype;
+ UNISTR printprocessor;
+ UNISTR parameters;
+ UNISTR drivername;
+ DEVICEMODE devmode;
+ UNISTR text_status;
+/* SEC_DESC sec_desc;*/
+ uint32 status;
+ uint32 priority;
+ uint32 position;
+ uint32 starttime;
+ uint32 untiltime;
+ uint32 totalpages;
+ uint32 size;
+ SYSTEMTIME submitted;
+ uint32 timeelapsed;
+ uint32 pagesprinted;
+} JOB_INFO_2;
+
+typedef struct spool_q_enumjobs
+{
+ PRINTER_HND handle;
+ uint32 firstjob;
+ uint32 numofjobs;
+ uint32 level;
+ BUFFER buffer;
+ uint32 buf_size;
+} SPOOL_Q_ENUMJOBS;
+
+typedef struct spool_r_enumjobs
+{
+ uint32 level;
+ union {
+ JOB_INFO_1 *job_info_1;
+ JOB_INFO_2 *job_info_2;
+ } job;
+ uint32 offered;
+ uint32 numofjobs;
+ uint32 status;
+} SPOOL_R_ENUMJOBS;
+
+typedef struct spool_q_schedulejob
+{
+ PRINTER_HND handle;
+ uint32 jobid;
+} SPOOL_Q_SCHEDULEJOB;
+
+typedef struct spool_r_schedulejob
+{
+ uint32 status;
+} SPOOL_R_SCHEDULEJOB;
+
+typedef struct s_port_info_1
+{
+ UNISTR port_name;
+} PORT_INFO_1;
+
+typedef struct s_port_info_2
+{
+ UNISTR port_name;
+ UNISTR monitor_name;
+ UNISTR description;
+ uint32 port_type;
+ uint32 reserved;
+} PORT_INFO_2;
+
+typedef struct spool_q_enumports
+{
+ UNISTR2 name;
+ uint32 level;
+ BUFFER buffer;
+ uint32 buf_size;
+} SPOOL_Q_ENUMPORTS;
+
+typedef struct spool_r_enumports
+{
+ uint32 level;
+ union {
+ PORT_INFO_1 *port_info_1;
+ PORT_INFO_2 *port_info_2;
+ } port;
+ uint32 offered;
+ uint32 numofports;
+ uint32 status;
+} SPOOL_R_ENUMPORTS;
+
+#define JOB_CONTROL_PAUSE 1
+#define JOB_CONTROL_RESUME 2
+#define JOB_CONTROL_CANCEL 3
+#define JOB_CONTROL_RESTART 4
+#define JOB_CONTROL_DELETE 5
+
+typedef struct spool_q_setjob
+{
+ PRINTER_HND handle;
+ uint32 jobid;
+ uint32 level;
+ union {
+ JOB_INFO_1 job_info_1;
+ JOB_INFO_2 job_info_2;
+ } job;
+ uint32 command;
+} SPOOL_Q_SETJOB;
+
+typedef struct spool_r_setjob
+{
+ uint32 status;
+} SPOOL_R_SETJOB;
+
+typedef struct spool_q_enumprinterdrivers
+{
+ UNISTR2 name;
+ UNISTR2 environment;
+ uint32 level;
+ BUFFER buffer;
+ uint32 buf_size;
+} SPOOL_Q_ENUMPRINTERDRIVERS;
+
+typedef struct spool_r_enumprinterdrivers
+{
+ uint32 level;
+ union {
+ DRIVER_INFO_1 *driver_info_1;
+ DRIVER_INFO_2 *driver_info_2;
+ DRIVER_INFO_3 *driver_info_3;
+ } driver;
+ uint32 offered;
+ uint32 numofdrivers;
+ uint32 status;
+} SPOOL_R_ENUMPRINTERDRIVERS;
+
+typedef struct spool_form_1
+{
+ uint32 flag;
+ UNISTR name;
+ uint32 width;
+ uint32 length;
+ uint32 left;
+ uint32 top;
+ uint32 right;
+ uint32 bottom;
+} FORM_1;
+
+typedef struct spool_q_enumforms
+{
+ PRINTER_HND handle;
+ uint32 level;
+ BUFFER buffer;
+ uint32 buf_size;
+} SPOOL_Q_ENUMFORMS;
+
+typedef struct spool_r_enumforms
+{
+ uint32 level;
+ FORM_1 *forms_1;
+ uint32 offered;
+ uint32 numofforms;
+ uint32 status;
+} SPOOL_R_ENUMFORMS;
+
+
+typedef struct spool_printer_info_level_2
+{
+ uint32 servername_ptr;
+ uint32 printername_ptr;
+ uint32 sharename_ptr;
+ uint32 portname_ptr;
+ uint32 drivername_ptr;
+ uint32 comment_ptr;
+ uint32 location_ptr;
+ uint32 devmode_ptr;
+ uint32 sepfile_ptr;
+ uint32 printprocessor_ptr;
+ uint32 datatype_ptr;
+ uint32 parameters_ptr;
+ uint32 secdesc_ptr;
+ uint32 attributes;
+ uint32 priority;
+ uint32 default_priority;
+ uint32 starttime;
+ uint32 untiltime;
+ uint32 status;
+ uint32 cjobs;
+ uint32 averageppm;
+ UNISTR2 servername;
+ UNISTR2 printername;
+ UNISTR2 sharename;
+ UNISTR2 portname;
+ UNISTR2 drivername;
+ UNISTR2 comment;
+ UNISTR2 location;
+ UNISTR2 sepfile;
+ UNISTR2 printprocessor;
+ UNISTR2 datatype;
+ UNISTR2 parameters;
+ SEC_DESC_BUF *secdesc;
+} SPOOL_PRINTER_INFO_LEVEL_2;
+
+typedef struct spool_printer_info_level
+{
+ SPOOL_PRINTER_INFO_LEVEL_2 *info_2;
+} SPOOL_PRINTER_INFO_LEVEL;
+
+typedef struct spool_printer_driver_info_level_3
+{
+ uint32 cversion;
+ uint32 name_ptr;
+ uint32 environment_ptr;
+ uint32 driverpath_ptr;
+ uint32 datafile_ptr;
+ uint32 configfile_ptr;
+ uint32 helpfile_ptr;
+ uint32 monitorname_ptr;
+ uint32 defaultdatatype_ptr;
+ uint32 dependentfilessize;
+ uint32 dependentfiles_ptr;
+
+ UNISTR2 name;
+ UNISTR2 environment;
+ UNISTR2 driverpath;
+ UNISTR2 datafile;
+ UNISTR2 configfile;
+ UNISTR2 helpfile;
+ UNISTR2 monitorname;
+ UNISTR2 defaultdatatype;
+ BUFFER5 dependentfiles;
+
+} SPOOL_PRINTER_DRIVER_INFO_LEVEL_3;
+
+typedef struct spool_printer_driver_info_level
+{
+ SPOOL_PRINTER_DRIVER_INFO_LEVEL_3 *info_3;
+} SPOOL_PRINTER_DRIVER_INFO_LEVEL;
+
+
+/* this struct is undocumented */
+/* thanks to the ddk ... */
+typedef struct spool_user_level_1
+{
+ uint32 size;
+ uint32 client_name_ptr;
+ uint32 user_name_ptr;
+ uint32 build;
+ uint32 major;
+ uint32 minor;
+ uint32 processor;
+ UNISTR2 client_name;
+ UNISTR2 user_name;
+} SPOOL_USER_LEVEL_1;
+
+typedef struct spool_user_level
+{
+ SPOOL_USER_LEVEL_1 *user_level_1;
+} SPOOL_USER_LEVEL;
+
+typedef struct spool_q_setprinter
+{
+ PRINTER_HND handle;
+ uint32 level;
+ SPOOL_PRINTER_INFO_LEVEL info;
+
+ DEVICEMODE *devmode;
+ struct
+ {
+ uint32 size_of_buffer;
+ uint32 data;
+ } security;
+
+ uint32 command;
+} SPOOL_Q_SETPRINTER;
+
+typedef struct spool_r_setprinter
+{
+ uint32 status;
+} SPOOL_R_SETPRINTER;
+
+typedef struct spool_q_addprinter
+{
+ UNISTR2 server_name;
+ uint32 level;
+ SPOOL_PRINTER_INFO_LEVEL info;
+ uint32 unk0;
+ uint32 unk1;
+ uint32 unk2;
+ uint32 unk3;
+ uint32 user_level;
+ SPOOL_USER_LEVEL user;
+} SPOOL_Q_ADDPRINTER;
+
+typedef struct spool_r_addprinter
+{
+ uint32 status;
+} SPOOL_R_ADDPRINTER;
+
+typedef struct spool_q_addprinterex
+{
+ UNISTR2 server_name;
+ uint32 level;
+ SPOOL_PRINTER_INFO_LEVEL info;
+ uint32 unk0;
+ uint32 unk1;
+ uint32 unk2;
+ uint32 unk3;
+ uint32 user_level;
+ SPOOL_USER_LEVEL user;
+} SPOOL_Q_ADDPRINTEREX;
+
+
+typedef struct spool_r_addprinterex
+{
+ PRINTER_HND handle;
+ uint32 status;
+} SPOOL_R_ADDPRINTEREX;
+
+typedef struct spool_q_addprinterdriver
+{
+ UNISTR2 server_name;
+ uint32 level;
+ SPOOL_PRINTER_DRIVER_INFO_LEVEL info;
+} SPOOL_Q_ADDPRINTERDRIVER;
+
+typedef struct spool_r_addprinterdriver
+{
+ uint32 status;
+} SPOOL_R_ADDPRINTERDRIVER;
+
+typedef struct spool_q_getprinterdriverdirectory
+{
+ UNISTR2 name;
+ UNISTR2 environment;
+ uint32 level;
+ BUFFER buffer;
+ uint32 buf_size;
+} SPOOL_Q_GETPRINTERDRIVERDIR;
+
+typedef struct driver_directory_1
+{
+ UNISTR name;
+} DRIVER_DIRECTORY_1 ;
+
+typedef struct spool_r_getprinterdriverdirectory
+{
+ uint32 level;
+ union {
+ DRIVER_DIRECTORY_1 driver_info_1;
+ } driver;
+ uint32 offered;
+ uint32 status;
+} SPOOL_R_GETPRINTERDRIVERDIR;
+
+typedef struct spool_q_enumprintprocessors
+{
+ UNISTR2 name;
+ UNISTR2 environment;
+ uint32 level;
+ BUFFER buffer;
+ uint32 buf_size;
+} SPOOL_Q_ENUMPRINTPROCESSORS;
+
+typedef struct printprocessor_1
+{
+ UNISTR name;
+} PRINTPROCESSOR_1;
+
+typedef struct spool_r_enumprintprocessors
+{
+ uint32 level;
+ PRINTPROCESSOR_1 *info_1;
+ uint32 offered;
+ uint32 numofprintprocessors;
+ uint32 status;
+} SPOOL_R_ENUMPRINTPROCESSORS;
+
+typedef struct spool_q_enumprintprocessordatatypes
+{
+ UNISTR2 name;
+ UNISTR2 printprocessor;
+ uint32 level;
+ BUFFER buffer;
+ uint32 buf_size;
+} SPOOL_Q_ENUMPRINTPROCESSORDATATYPES;
+
+typedef struct ppdatatype_1
+{
+ UNISTR name;
+} PPDATATYPE_1;
+
+typedef struct spool_r_enumprintprocessordatatypes
+{
+ uint32 level;
+ PPDATATYPE_1 *info_1;
+ uint32 offered;
+ uint32 numofppdatatypes;
+ uint32 status;
+} SPOOL_R_ENUMPRINTPROCESSORDATATYPES;
+
+typedef struct spool_q_enumprinterdata
+{
+ PRINTER_HND handle;
+ uint32 index;
+ uint32 valuesize;
+ uint32 datasize;
+} SPOOL_Q_ENUMPRINTERDATA;
+
+typedef struct spool_r_enumprinterdata
+{
+ uint32 valuesize;
+ UNISTR value;
+ uint32 realvaluesize;
+ uint32 type;
+ uint32 datasize;
+ uint8 *data;
+ uint32 realdatasize;
+ uint32 status;
+} SPOOL_R_ENUMPRINTERDATA;
+
+typedef struct spool_q_setprinterdata
+{
+ PRINTER_HND handle;
+ UNISTR2 value;
+ uint32 type;
+ uint32 max_len;
+ uint8 *data;
+ uint32 real_len;
+ uint32 numeric_data;
+}SPOOL_Q_SETPRINTERDATA;
+
+typedef struct spool_r_setprinterdata
+{
+ uint32 status;
+}SPOOL_R_SETPRINTERDATA;
+
+#define PRINTER_DRIVER_VERSION 2
+#define PRINTER_DRIVER_ARCHITECTURE "Windows NT x86"
+
+
+#endif /* _RPC_SPOOLSS_H */
+
--- /dev/null
+#include "includes.h"
+#include "nterr.h"
+
+extern int DEBUGLEVEL;
+
+/****************************************************************************
+parse a form line.
+****************************************************************************/
+static BOOL parse_form_entry(char *line, nt_forms_struct *buf)
+{
+#define NAMETOK 0
+#define FLAGTOK 1
+#define WIDTHTOK 2
+#define LENGTHTOK 3
+#define LEFTTOK 4
+#define TOPTOK 5
+#define RIGHTTOK 6
+#define BOTTOMTOK 7
+#define MAXTOK 8
+ char *tok[MAXTOK];
+ int count = 0;
+
+ tok[count] = strtok(line,":");
+
+ /* strip the comment lines */
+ if (tok[0][0]=='#') return (False);
+ count++;
+
+ while ( ((tok[count] = strtok(NULL,":")) != NULL ) && count<MAXTOK-1)
+ {
+ count++;
+ }
+
+ DEBUG(6,("Found [%d] tokens\n", count));
+
+ StrnCpy(buf->name,tok[NAMETOK],sizeof(buf->name)-1);
+ buf->flag=atoi(tok[FLAGTOK]);
+ buf->width=atoi(tok[WIDTHTOK]);
+ buf->length=atoi(tok[LENGTHTOK]);
+ buf->left=atoi(tok[LEFTTOK]);
+ buf->top=atoi(tok[TOPTOK]);
+ buf->right=atoi(tok[RIGHTTOK]);
+ buf->bottom=atoi(tok[BOTTOMTOK]);
+
+ return(True);
+}
+
+/****************************************************************************
+get a form struct list
+****************************************************************************/
+int get_ntforms(nt_forms_struct **list)
+{
+ FILE *f;
+ pstring line;
+ char *lp_forms = lp_nt_forms();
+ int total=0;
+ int grandtotal=0;
+ *line=0;
+
+ f = sys_fopen(lp_forms,"r");
+ if (!f)
+ {
+ return(0);
+ }
+
+ while ( fgets(line, sizeof(pstring), f) )
+ {
+ DEBUG(5,("%s\n",line));
+
+ *list = Realloc(*list, sizeof(nt_forms_struct)*(total+1));
+ if (! *list)
+ {
+ total = 0;
+ break;
+ }
+ bzero( (char *)&(*list)[total], sizeof(nt_forms_struct) );
+ if ( parse_form_entry(line, &(*list)[total] ) )
+ {
+ total++;
+ }
+ grandtotal++;
+ }
+ fclose(f);
+
+ DEBUG(4,("%d info lines on %d\n",total, grandtotal));
+
+ return(total);
+}
+
+
+/****************************************************************************
+get the nt drivers list
+
+open the rectory and look-up the matching names
+****************************************************************************/
+int get_ntdrivers(fstring **list, char *architecture)
+{
+ void *dirp;
+ char *dpname;
+ fstring name_match;
+ fstring short_archi;
+ fstring driver_name;
+ int match_len;
+ int total=0;
+
+ DEBUG(5,("Getting the driver list from directory: [%s]\n", lp_nt_drivers_file()));
+
+ *list=NULL;
+ dirp = OpenDir(NULL, lp_nt_drivers_file(), False);
+
+ if (!dirp)
+ {
+ DEBUG(0,("Error opening driver directory [%s]\n",lp_nt_drivers_file()));
+ return(-1);
+ }
+
+ get_short_archi(short_archi, architecture);
+ slprintf(name_match, sizeof(name_match)-1, "NTdriver_%s_", short_archi);
+ match_len=strlen(name_match);
+
+
+ while ((dpname = ReadDirName(dirp)) != NULL)
+ {
+ if (strncmp(dpname, name_match, match_len)==0)
+ {
+ DEBUGADD(7,("Found: [%s]\n", dpname));
+
+ StrCpy(driver_name, dpname+match_len);
+ all_string_sub(driver_name, "#", "/");
+ *list = Realloc(*list, sizeof(fstring)*(total+1));
+ StrnCpy((*list)[total], driver_name, strlen(driver_name));
+ DEBUGADD(6,("Added: [%s]\n", driver_name));
+ total++;
+ }
+ }
+
+ CloseDir(dirp);
+ return(total);
+}
+
+/****************************************************************************
+function to do the mapping between the long architecture name and
+the short one.
+****************************************************************************/
+void get_short_archi(char *short_archi, char *long_archi)
+{
+ struct table {
+ char *long_archi;
+ char *short_archi;
+ };
+
+ struct table archi_table[]=
+ {
+ {"Windows 4.0", "" },
+ {"Windows NT x86", "W32X86" },
+ {"Windows NT R4000", "" },
+ {"Windows NT Alpha_AXP", "" },
+ {"Windows NT PowerPC", "" },
+ {NULL, "" }
+ };
+
+ int i=-1;
+
+ DEBUG(7,("Getting architecture dependant directory\n"));
+ do {
+ i++;
+ } while ( (archi_table[i].long_archi!=NULL ) && strncmp(long_archi, archi_table[i].long_archi, strlen(long_archi)) );
+
+ if (archi_table[i].long_archi==NULL)
+ {
+ DEBUGADD(7,("Unknown architecture [%s] !\n", long_archi));
+ }
+ StrnCpy (short_archi, archi_table[i].short_archi, strlen(archi_table[i].short_archi));
+
+ DEBUGADD(8,("index: [%d]\n", i));
+ DEBUGADD(8,("long architecture: [%s]\n", long_archi));
+ DEBUGADD(8,("short architecture: [%s]\n", short_archi));
+}
+
+/****************************************************************************
+****************************************************************************/
+static uint32 add_a_printer_driver_3(NT_PRINTER_DRIVER_INFO_LEVEL_3 *driver)
+{
+ FILE *f;
+ pstring file;
+ fstring architecture;
+ fstring driver_name;
+ char **dependentfiles;
+
+ /* create a file in the dir lp_nt_driver_file */
+ /* with the full printer DRIVER name */
+ /* eg: "/usr/local/samba/lib/NTdriver_HP LaserJet 6MP" */
+ /* each name is really defining an *unique* printer model */
+ /* I don't want to mangle the name to find it back when enumerating */
+
+ /* il faut substituer les / par 1 autre caractere d'abord */
+ /* dans le nom de l'imprimante par un # ???*/
+
+ StrnCpy(driver_name, driver->name, sizeof(driver_name)-1);
+
+ all_string_sub(driver_name, "/", "#");
+
+ get_short_archi(architecture, driver->environment);
+
+ slprintf(file, sizeof(file)-1, "%s/NTdriver_%s_%s",
+ lp_nt_drivers_file(), architecture, driver_name);
+
+ if((f = sys_fopen(file, "w")) == NULL)
+ {
+ DEBUG(1, ("cannot create driver file [%s]\n", file));
+ return(2);
+ }
+
+ /*
+ * cversion must be 2.
+ * when adding a printer ON the SERVER
+ * rpcAddPrinterDriver defines it to zero
+ * which is wrong !!!
+ *
+ * JFM, 4/14/99
+ */
+ driver->cversion=2;
+
+ fprintf(f, "version: %d\n", driver->cversion);
+ fprintf(f, "name: %s\n", driver->name);
+ fprintf(f, "environment: %s\n", driver->environment);
+ fprintf(f, "driverpath: %s\n", driver->driverpath);
+ fprintf(f, "datafile: %s\n", driver->datafile);
+ fprintf(f, "configfile: %s\n", driver->configfile);
+ fprintf(f, "helpfile: %s\n", driver->helpfile);
+ fprintf(f, "monitorname: %s\n", driver->monitorname);
+ fprintf(f, "defaultdatatype: %s\n", driver->defaultdatatype);
+
+ /* and the dependants files */
+
+ dependentfiles=driver->dependentfiles;
+
+ while ( **dependentfiles != '\0' )
+ {
+ fprintf(f, "dependentfile: %s\n", *dependentfiles);
+ dependentfiles++;
+ }
+
+ fclose(f);
+ return(0);
+}
+
+/****************************************************************************
+****************************************************************************/
+static uint32 get_a_printer_driver_3(NT_PRINTER_DRIVER_INFO_LEVEL_3 **info_ptr, fstring in_prt, fstring in_arch)
+{
+ FILE *f;
+ pstring file;
+ fstring driver_name;
+ fstring architecture;
+ NT_PRINTER_DRIVER_INFO_LEVEL_3 *info;
+ char *line;
+ fstring p;
+ char *v;
+ int i=0;
+ char **dependentfiles=NULL;
+
+ /*
+ * replace all the / by # in the driver name
+ * get the short architecture name
+ * construct the driver file name
+ */
+ StrnCpy(driver_name, in_prt, sizeof(driver_name)-1);
+ all_string_sub(driver_name, "/", "#");
+
+ get_short_archi(architecture, in_arch);
+
+ slprintf(file, sizeof(file)-1, "%s/NTdriver_%s_%s",
+ lp_nt_drivers_file(), architecture, driver_name);
+
+ if((f = sys_fopen(file, "r")) == NULL)
+ {
+ DEBUG(2, ("cannot open printer driver file [%s]\n", file));
+ return(2);
+ }
+
+ /* the file exists, allocate some memory */
+ info=(NT_PRINTER_DRIVER_INFO_LEVEL_3 *)malloc(sizeof(NT_PRINTER_DRIVER_INFO_LEVEL_3));
+ ZERO_STRUCTP(info);
+
+ /* allocate a 4Kbytes buffer for parsing lines */
+ line=(char *)malloc(4096*sizeof(char));
+
+ while ( fgets(line, 4095, f) )
+ {
+
+ v=strncpyn(p, line, sizeof(p), ':');
+ if (v==NULL)
+ {
+ DEBUG(1, ("malformed printer entry (no :)\n"));
+ continue;
+ }
+
+ v++;
+
+ trim_string(v, " ", NULL);
+ trim_string(v, NULL, " ");
+ trim_string(v, NULL, "\n");
+ /* don't check if v==NULL as an empty arg is valid */
+
+ if (!strncmp(p, "version", strlen("version")))
+ info->cversion=atoi(v);
+
+ if (!strncmp(p, "name", strlen("name")))
+ StrnCpy(info->name, v, strlen(v));
+
+ if (!strncmp(p, "environment", strlen("environment")))
+ StrnCpy(info->environment, v, strlen(v));
+
+ if (!strncmp(p, "driverpath", strlen("driverpath")))
+ StrnCpy(info->driverpath, v, strlen(v));
+
+ if (!strncmp(p, "datafile", strlen("datafile")))
+ StrnCpy(info->datafile, v, strlen(v));
+
+ if (!strncmp(p, "configfile", strlen("configfile")))
+ StrnCpy(info->configfile, v, strlen(v));
+
+ if (!strncmp(p, "helpfile", strlen("helpfile")))
+ StrnCpy(info->helpfile, v, strlen(v));
+
+ if (!strncmp(p, "monitorname", strlen("monitorname")))
+ StrnCpy(info->monitorname, v, strlen(v));
+
+ if (!strncmp(p, "defaultdatatype", strlen("defaultdatatype")))
+ StrnCpy(info->defaultdatatype, v, strlen(v));
+
+ if (!strncmp(p, "dependentfile", strlen("dependentfile")))
+ {
+ dependentfiles=(char **)Realloc(dependentfiles, sizeof(char *)*(i+1));
+
+ dependentfiles[i]=(char *)malloc( sizeof(char)* (strlen(v)+1) );
+
+ StrnCpy(dependentfiles[i], v, strlen(v) );
+ i++;
+ }
+
+ }
+
+ free(line);
+
+ fclose(f);
+
+ dependentfiles=(char **)Realloc(dependentfiles, sizeof(char *)*(i+1));
+ dependentfiles[i]=(char *)malloc( sizeof(char) );
+ *dependentfiles[i]='\0';
+
+ info->dependentfiles=dependentfiles;
+
+ *info_ptr=info;
+
+ return (0);
+}
+
+/****************************************************************************
+debugging function, dump at level 6 the struct in the logs
+****************************************************************************/
+static uint32 dump_a_printer_driver(NT_PRINTER_DRIVER_INFO_LEVEL driver, uint32 level)
+{
+ uint32 success;
+ NT_PRINTER_DRIVER_INFO_LEVEL_3 *info3;
+ char **dependentfiles;
+
+ DEBUG(6,("Dumping printer driver at level [%d]\n", level));
+
+ switch (level)
+ {
+ case 3:
+ {
+ if (driver.info_3 == NULL)
+ {
+ DEBUGADD(3,("NULL pointer, memory not alloced ?\n"));
+ success=5;
+ }
+ else
+ {
+ info3=driver.info_3;
+
+ DEBUGADD(6,("version:[%d]\n", info3->cversion));
+ DEBUGADD(6,("name:[%s]\n", info3->name));
+ DEBUGADD(6,("environment:[%s]\n", info3->environment));
+ DEBUGADD(6,("driverpath:[%s]\n", info3->driverpath));
+ DEBUGADD(6,("datafile:[%s]\n", info3->datafile));
+ DEBUGADD(6,("configfile:[%s]\n", info3->configfile));
+ DEBUGADD(6,("helpfile:[%s]\n", info3->helpfile));
+ DEBUGADD(6,("monitorname:[%s]\n", info3->monitorname));
+ DEBUGADD(6,("defaultdatatype:[%s]\n", info3->defaultdatatype));
+
+ dependentfiles=info3->dependentfiles;
+
+ while ( **dependentfiles != '\0' )
+ {
+ DEBUGADD(6,("dependentfile:[%s]\n", *dependentfiles));
+ dependentfiles++;
+ }
+ success=0;
+ }
+ break;
+ }
+ default:
+ DEBUGADD(1,("Level not implemented\n"));
+ success=1;
+ break;
+ }
+
+ return (success);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void add_a_devicemode(NT_DEVICEMODE *nt_devmode, FILE *f)
+{
+ int i;
+
+ fprintf(f, "formname: %s\n", nt_devmode->formname);
+ fprintf(f, "specversion: %d\n", nt_devmode->specversion);
+ fprintf(f, "driverversion: %d\n", nt_devmode->driverversion);
+ fprintf(f, "size: %d\n", nt_devmode->size);
+ fprintf(f, "driverextra: %d\n", nt_devmode->driverextra);
+ fprintf(f, "fields: %d\n", nt_devmode->fields);
+ fprintf(f, "orientation: %d\n", nt_devmode->orientation);
+ fprintf(f, "papersize: %d\n", nt_devmode->papersize);
+ fprintf(f, "paperlength: %d\n", nt_devmode->paperlength);
+ fprintf(f, "paperwidth: %d\n", nt_devmode->paperwidth);
+ fprintf(f, "scale: %d\n", nt_devmode->scale);
+ fprintf(f, "copies: %d\n", nt_devmode->copies);
+ fprintf(f, "defaultsource: %d\n", nt_devmode->defaultsource);
+ fprintf(f, "printquality: %d\n", nt_devmode->printquality);
+ fprintf(f, "color: %d\n", nt_devmode->color);
+ fprintf(f, "duplex: %d\n", nt_devmode->duplex);
+ fprintf(f, "yresolution: %d\n", nt_devmode->yresolution);
+ fprintf(f, "ttoption: %d\n", nt_devmode->ttoption);
+ fprintf(f, "collate: %d\n", nt_devmode->collate);
+ fprintf(f, "icmmethod: %d\n", nt_devmode->icmmethod);
+ fprintf(f, "icmintent: %d\n", nt_devmode->icmintent);
+ fprintf(f, "mediatype: %d\n", nt_devmode->mediatype);
+ fprintf(f, "dithertype: %d\n", nt_devmode->dithertype);
+
+ if (nt_devmode->private != NULL)
+ {
+ fprintf(f, "private: ");
+ for (i=0; i<nt_devmode->driverextra; i++)
+ fprintf(f, "%02X", nt_devmode->private[i]);
+ fprintf(f, "\n");
+ }
+}
+
+/****************************************************************************
+****************************************************************************/
+static void save_specifics(NT_PRINTER_PARAM *param, FILE *f)
+{
+ int i;
+
+ while (param != NULL)
+ {
+ fprintf(f, "specific: %s#%d#%d#", param->value, param->type, param->data_len);
+
+ for (i=0; i<param->data_len; i++)
+ fprintf(f, "%02X", param->data[i]);
+
+ fprintf(f, "\n");
+
+ param=param->next;
+ }
+}
+
+/****************************************************************************
+****************************************************************************/
+static uint32 add_a_printer_2(NT_PRINTER_INFO_LEVEL_2 *info)
+{
+ FILE *f;
+ pstring file;
+ fstring printer_name;
+ NT_DEVICEMODE *nt_devmode;
+
+ /*
+ * JFM: one day I'll forget.
+ * below that's info->portname because that's the SAMBA sharename
+ * and I made NT 'thinks' it's the portname
+ * the info->sharename is the thing you can name when you add a printer
+ * that's the short-name when you create shared printer for 95/98
+ * So I've made a limitation in SAMBA: you can only have 1 printer model
+ * behind a SAMBA share.
+ */
+
+
+ StrnCpy(printer_name, info->portname, sizeof(printer_name)-1);
+
+ slprintf(file, sizeof(file)-1, "%s/NTprinter_%s",
+ lp_nt_drivers_file(), printer_name);
+
+ /* create a file in the dir lp_nt_driver_file */
+ /* with the full printer name */
+ /* eg: "/usr/local/samba/lib/NTprinter_HP LaserJet 6MP" */
+ /* each name is really defining an *unique* printer model */
+ /* I don't want to mangle the name to find it back when enumerating */
+
+ if((f = sys_fopen(file, "w")) == NULL)
+ {
+ DEBUG(1, ("cannot create printer file [%s]\n", file));
+ return(2);
+ }
+
+ fprintf(f, "attributes: %d\n", info->attributes);
+ fprintf(f, "priority: %d\n", info->priority);
+ fprintf(f, "default_priority: %d\n", info->default_priority);
+ fprintf(f, "starttime: %d\n", info->starttime);
+ fprintf(f, "untiltime: %d\n", info->untiltime);
+ fprintf(f, "status: %d\n", info->status);
+ fprintf(f, "cjobs: %d\n", info->cjobs);
+ fprintf(f, "averageppm: %d\n", info->averageppm);
+
+ /*
+ * in addprinter: no servername and the printer is the name
+ * in setprinter: servername is \\server
+ * and printer is \\server\\printer
+ *
+ * Samba manages only local printers.
+ * we currently don't support things like path=\\other_server\printer
+ */
+
+ if (info->servername[0]!='\0')
+ {
+ trim_string(info->printername, info->servername, NULL);
+ trim_string(info->printername, "\\", NULL);
+ info->servername[0]='\0';
+ }
+
+ fprintf(f, "servername: %s\n", info->servername);
+ fprintf(f, "printername: %s\n", info->printername);
+ fprintf(f, "sharename: %s\n", info->sharename);
+ fprintf(f, "portname: %s\n", info->portname);
+ fprintf(f, "drivername: %s\n", info->drivername);
+ fprintf(f, "comment: %s\n", info->comment);
+ fprintf(f, "location: %s\n", info->location);
+ fprintf(f, "sepfile: %s\n", info->sepfile);
+ fprintf(f, "printprocessor: %s\n", info->printprocessor);
+ fprintf(f, "datatype: %s\n", info->datatype);
+ fprintf(f, "parameters: %s\n", info->parameters);
+
+ /* store the devmode and the private part if it exist */
+ nt_devmode=info->devmode;
+ if (nt_devmode!=NULL)
+ {
+ add_a_devicemode(nt_devmode, f);
+ }
+
+ /* and store the specific parameters */
+ if (info->specific != NULL)
+ {
+ save_specifics(info->specific, f);
+ }
+
+ fclose(f);
+
+ return (0);
+}
+
+/****************************************************************************
+fill a NT_PRINTER_PARAM from a text file
+
+used when reading from disk.
+****************************************************************************/
+static void dissect_and_fill_a_param(NT_PRINTER_PARAM *param, char *v)
+{
+ char *tok[5];
+ int count = 0;
+
+ DEBUG(5,("dissect_and_fill_a_param\n"));
+
+ tok[count] = strtok(v,"#");
+ count++;
+
+ while ( ((tok[count] = strtok(NULL,"#")) != NULL ) && count<4)
+ {
+ count++;
+ }
+
+ StrnCpy(param->value, tok[0], sizeof(param->value)-1);
+ param->type=atoi(tok[1]);
+ param->data_len=atoi(tok[2]);
+ param->data=(uint8 *)malloc(param->data_len * sizeof(uint8));
+ strhex_to_str(param->data, 2*(param->data_len), tok[3]);
+ param->next=NULL;
+
+ DEBUGADD(5,("value:[%s], len:[%d]\n", param->value, param->data_len));
+}
+
+/****************************************************************************
+fill a NT_PRINTER_PARAM from a text file
+
+used when reading from disk.
+****************************************************************************/
+void dump_a_param(NT_PRINTER_PARAM *param)
+{
+ DEBUG(5,("dump_a_param\n"));
+ DEBUGADD(6,("value [%s]\n", param->value));
+ DEBUGADD(6,("type [%d]\n", param->type));
+ DEBUGADD(6,("data len [%d]\n", param->data_len));
+}
+
+/****************************************************************************
+****************************************************************************/
+BOOL add_a_specific_param(NT_PRINTER_INFO_LEVEL_2 *info_2, NT_PRINTER_PARAM *param)
+{
+ NT_PRINTER_PARAM *current;
+
+ DEBUG(8,("add_a_specific_param\n"));
+
+ param->next=NULL;
+
+ if (info_2->specific == NULL)
+ {
+ info_2->specific=param;
+ }
+ else
+ {
+ current=info_2->specific;
+ while (current->next != NULL) {
+ current=current->next;
+ }
+ current->next=param;
+ }
+ return (True);
+}
+
+/****************************************************************************
+****************************************************************************/
+BOOL unlink_specific_param_if_exist(NT_PRINTER_INFO_LEVEL_2 *info_2, NT_PRINTER_PARAM *param)
+{
+ NT_PRINTER_PARAM *current;
+ NT_PRINTER_PARAM *previous;
+
+ current=info_2->specific;
+ previous=current;
+
+ if (current==NULL) return (False);
+
+ if ( !strcmp(current->value, param->value) &&
+ (strlen(current->value)==strlen(param->value)) )
+ {
+ DEBUG(9,("deleting first value\n"));
+ info_2->specific=current->next;
+ free(current);
+ DEBUG(9,("deleted first value\n"));
+ return (True);
+ }
+
+ current=previous->next;
+
+ while ( current!=NULL )
+ {
+ if (!strcmp(current->value, param->value) &&
+ strlen(current->value)==strlen(param->value) )
+ {
+ DEBUG(9,("deleting current value\n"));
+ previous->next=current->next;
+ free(current);
+ DEBUG(9,("deleted current value\n"));
+ return(True);
+ }
+
+ previous=previous->next;
+ current=current->next;
+ }
+ return (False);
+}
+
+/****************************************************************************
+****************************************************************************/
+static uint32 get_a_printer_2(NT_PRINTER_INFO_LEVEL_2 **info_ptr, fstring sharename)
+{
+ FILE *f;
+ pstring file;
+ fstring printer_name;
+ NT_PRINTER_INFO_LEVEL_2 *info;
+ NT_DEVICEMODE *nt_devmode;
+ NT_PRINTER_PARAM *param;
+ char *line;
+ fstring p;
+ char *v;
+
+ /*
+ * the sharename argument is the SAMBA sharename
+ */
+ StrnCpy(printer_name, sharename, sizeof(printer_name)-1);
+
+ slprintf(file, sizeof(file)-1, "%s/NTprinter_%s",
+ lp_nt_drivers_file(), printer_name);
+
+ if((f = sys_fopen(file, "r")) == NULL)
+ {
+ DEBUG(2, ("cannot open printer file [%s]\n", file));
+ return(2);
+ }
+
+ /* the file exists, allocate some memory */
+ info=(NT_PRINTER_INFO_LEVEL_2 *)malloc(sizeof(NT_PRINTER_INFO_LEVEL_2));
+ ZERO_STRUCTP(info);
+
+ nt_devmode=(NT_DEVICEMODE *)malloc(sizeof(NT_DEVICEMODE));
+ ZERO_STRUCTP(nt_devmode);
+ init_devicemode(nt_devmode);
+
+ info->devmode=nt_devmode;
+
+ line=(char *)malloc(4096*sizeof(char));
+
+ while ( fgets(line, 4095, f) )
+ {
+
+ v=strncpyn(p, line, sizeof(p), ':');
+ if (v==NULL)
+ {
+ DEBUG(1, ("malformed printer entry (no `:')\n"));
+ DEBUGADD(2, ("line [%s]\n", line));
+ continue;
+ }
+
+ v++;
+
+ trim_string(v, " ", NULL);
+ trim_string(v, NULL, " ");
+ trim_string(v, NULL, "\n");
+
+ /* don't check if v==NULL as an empty arg is valid */
+
+ DEBUGADD(15, ("[%s]:[%s]\n", p, v));
+
+ /*
+ * The PRINTER_INFO_2 fields
+ */
+
+ if (!strncmp(p, "attributes", strlen("attributes")))
+ info->attributes=atoi(v);
+
+ if (!strncmp(p, "priority", strlen("priority")))
+ info->priority=atoi(v);
+
+ if (!strncmp(p, "default_priority", strlen("default_priority")))
+ info->default_priority=atoi(v);
+
+ if (!strncmp(p, "starttime", strlen("starttime")))
+ info->starttime=atoi(v);
+
+ if (!strncmp(p, "untiltime", strlen("untiltime")))
+ info->untiltime=atoi(v);
+
+ if (!strncmp(p, "status", strlen("status")))
+ info->status=atoi(v);
+
+ if (!strncmp(p, "cjobs", strlen("cjobs")))
+ info->cjobs=atoi(v);
+
+ if (!strncmp(p, "averageppm", strlen("averageppm")))
+ info->averageppm=atoi(v);
+
+ if (!strncmp(p, "servername", strlen("servername")))
+ StrnCpy(info->servername, v, strlen(v));
+
+ if (!strncmp(p, "printername", strlen("printername")))
+ StrnCpy(info->printername, v, strlen(v));
+
+ if (!strncmp(p, "sharename", strlen("sharename")))
+ StrnCpy(info->sharename, v, strlen(v));
+
+ if (!strncmp(p, "portname", strlen("portname")))
+ StrnCpy(info->portname, v, strlen(v));
+
+ if (!strncmp(p, "drivername", strlen("drivername")))
+ StrnCpy(info->drivername, v, strlen(v));
+
+ if (!strncmp(p, "comment", strlen("comment")))
+ StrnCpy(info->comment, v, strlen(v));
+
+ if (!strncmp(p, "location", strlen("location")))
+ StrnCpy(info->location, v, strlen(v));
+
+ if (!strncmp(p, "sepfile", strlen("sepfile")))
+ StrnCpy(info->sepfile, v, strlen(v));
+
+ if (!strncmp(p, "printprocessor", strlen("printprocessor")))
+ StrnCpy(info->printprocessor, v, strlen(v));
+
+ if (!strncmp(p, "datatype", strlen("datatype")))
+ StrnCpy(info->datatype, v, strlen(v));
+
+ if (!strncmp(p, "parameters", strlen("parameters")))
+ StrnCpy(info->parameters, v, strlen(v));
+
+ /*
+ * The DEVICEMODE fields
+ */
+
+ if (!strncmp(p, "formname", strlen("formname")))
+ StrnCpy(nt_devmode->formname, v, strlen(v));
+
+ if (!strncmp(p, "specversion", strlen("specversion")))
+ nt_devmode->specversion=atoi(v);
+
+ if (!strncmp(p, "driverversion", strlen("driverversion")))
+ nt_devmode->driverversion=atoi(v);
+
+ if (!strncmp(p, "size", strlen("size")))
+ nt_devmode->size=atoi(v);
+
+ if (!strncmp(p, "driverextra", strlen("driverextra")))
+ nt_devmode->driverextra=atoi(v);
+
+ if (!strncmp(p, "fields", strlen("fields")))
+ nt_devmode->fields=atoi(v);
+
+ if (!strncmp(p, "orientation", strlen("orientation")))
+ nt_devmode->orientation=atoi(v);
+
+ if (!strncmp(p, "papersize", strlen("papersize")))
+ nt_devmode->papersize=atoi(v);
+
+ if (!strncmp(p, "paperlength", strlen("paperlength")))
+ nt_devmode->paperlength=atoi(v);
+
+ if (!strncmp(p, "paperwidth", strlen("paperwidth")))
+ nt_devmode->paperwidth=atoi(v);
+
+ if (!strncmp(p, "scale", strlen("scale")))
+ nt_devmode->scale=atoi(v);
+
+ if (!strncmp(p, "copies", strlen("copies")))
+ nt_devmode->copies=atoi(v);
+
+ if (!strncmp(p, "defaultsource", strlen("defaultsource")))
+ nt_devmode->defaultsource=atoi(v);
+
+ if (!strncmp(p, "printquality", strlen("printquality")))
+ nt_devmode->printquality=atoi(v);
+
+ if (!strncmp(p, "color", strlen("color")))
+ nt_devmode->color=atoi(v);
+
+ if (!strncmp(p, "duplex", strlen("duplex")))
+ nt_devmode->duplex=atoi(v);
+
+ if (!strncmp(p, "yresolution", strlen("yresolution")))
+ nt_devmode->yresolution=atoi(v);
+
+ if (!strncmp(p, "ttoption", strlen("ttoption")))
+ nt_devmode->ttoption=atoi(v);
+
+ if (!strncmp(p, "collate", strlen("collate")))
+ nt_devmode->collate=atoi(v);
+
+ if (!strncmp(p, "icmmethod", strlen("icmmethod")))
+ nt_devmode->icmmethod=atoi(v);
+
+ if (!strncmp(p, "icmintent", strlen("icmintent")))
+ nt_devmode->icmintent=atoi(v);
+
+ if (!strncmp(p, "mediatype", strlen("mediatype")))
+ nt_devmode->mediatype=atoi(v);
+
+ if (!strncmp(p, "dithertype", strlen("dithertype")))
+ nt_devmode->dithertype=atoi(v);
+
+ if (!strncmp(p, "private", strlen("private")))
+ {
+ nt_devmode->private=(uint8 *)malloc(nt_devmode->driverextra*sizeof(uint8));
+ strhex_to_str(nt_devmode->private, 2*nt_devmode->driverextra, v);
+ }
+
+ /* the specific */
+
+ if (!strncmp(p, "specific", strlen("specific")))
+ {
+ param=(NT_PRINTER_PARAM *)malloc(sizeof(NT_PRINTER_PARAM));
+ ZERO_STRUCTP(param);
+
+ dissect_and_fill_a_param(param, v);
+
+ dump_a_param(param);
+
+ add_a_specific_param(info, param);
+ }
+
+ }
+ fclose(f);
+ free(line);
+
+ *info_ptr=info;
+
+ return (0);
+}
+
+/****************************************************************************
+debugging function, dump at level 6 the struct in the logs
+****************************************************************************/
+static uint32 dump_a_printer(NT_PRINTER_INFO_LEVEL printer, uint32 level)
+{
+ uint32 success;
+ NT_PRINTER_INFO_LEVEL_2 *info2;
+
+ DEBUG(6,("Dumping printer at level [%d]\n", level));
+
+ switch (level)
+ {
+ case 2:
+ {
+ if (printer.info_2 == NULL)
+ {
+ DEBUGADD(3,("NULL pointer, memory not alloced ?\n"));
+ success=5;
+ }
+ else
+ {
+ info2=printer.info_2;
+
+ DEBUGADD(6,("attributes:[%d]\n", info2->attributes));
+ DEBUGADD(6,("priority:[%d]\n", info2->priority));
+ DEBUGADD(6,("default_priority:[%d]\n", info2->default_priority));
+ DEBUGADD(6,("starttime:[%d]\n", info2->starttime));
+ DEBUGADD(6,("untiltime:[%d]\n", info2->untiltime));
+ DEBUGADD(6,("status:[%d]\n", info2->status));
+ DEBUGADD(6,("cjobs:[%d]\n", info2->cjobs));
+ DEBUGADD(6,("averageppm:[%d]\n", info2->averageppm));
+
+ DEBUGADD(6,("servername:[%s]\n", info2->servername));
+ DEBUGADD(6,("printername:[%s]\n", info2->printername));
+ DEBUGADD(6,("sharename:[%s]\n", info2->sharename));
+ DEBUGADD(6,("portname:[%s]\n", info2->portname));
+ DEBUGADD(6,("drivername:[%s]\n", info2->drivername));
+ DEBUGADD(6,("comment:[%s]\n", info2->comment));
+ DEBUGADD(6,("location:[%s]\n", info2->location));
+ DEBUGADD(6,("sepfile:[%s]\n", info2->sepfile));
+ DEBUGADD(6,("printprocessor:[%s]\n", info2->printprocessor));
+ DEBUGADD(6,("datatype:[%s]\n", info2->datatype));
+ DEBUGADD(6,("parameters:[%s]\n", info2->parameters));
+ success=0;
+ }
+ break;
+ }
+ default:
+ DEBUGADD(1,("Level not implemented\n"));
+ success=1;
+ break;
+ }
+
+ return (success);
+}
+
+/*
+ * The function below are the high level ones.
+ * only those ones must be called from the spoolss code.
+ * JFM.
+ */
+
+
+/****************************************************************************
+****************************************************************************/
+uint32 add_a_printer(NT_PRINTER_INFO_LEVEL printer, uint32 level)
+{
+ uint32 success;
+
+ dump_a_printer(printer, level);
+
+ switch (level)
+ {
+ case 2:
+ {
+ success=add_a_printer_2(printer.info_2);
+ break;
+ }
+ default:
+ success=1;
+ break;
+ }
+
+ return (success);
+}
+
+/****************************************************************************
+****************************************************************************/
+uint32 get_a_printer(NT_PRINTER_INFO_LEVEL *printer, uint32 level, fstring sharename)
+{
+ uint32 success;
+
+ switch (level)
+ {
+ case 2:
+ {
+ printer->info_2=NULL;
+ success=get_a_printer_2(&(printer->info_2), sharename);
+ break;
+ }
+ default:
+ success=1;
+ break;
+ }
+
+ dump_a_printer(*printer, level);
+ return (success);
+}
+
+/****************************************************************************
+****************************************************************************/
+uint32 free_a_printer(NT_PRINTER_INFO_LEVEL printer, uint32 level)
+{
+ uint32 success;
+ DEBUG(4,("freeing a printer at level [%d]\n", level));
+
+ switch (level)
+ {
+ case 2:
+ {
+ if (printer.info_2 != NULL)
+ {
+ if ((printer.info_2)->devmode != NULL)
+ {
+ DEBUG(6,("deleting DEVMODE\n"));
+ if ((printer.info_2)->devmode->private !=NULL )
+ free((printer.info_2)->devmode->private);
+ free((printer.info_2)->devmode);
+ }
+
+ if ((printer.info_2)->specific != NULL)
+ {
+ NT_PRINTER_PARAM *param;
+ NT_PRINTER_PARAM *next_param;
+
+ param=(printer.info_2)->specific;
+
+ while ( param != NULL)
+ {
+ next_param=param->next;
+ DEBUG(6,("deleting param [%s]\n", param->value));
+ free(param);
+ param=next_param;
+ }
+ }
+
+ free(printer.info_2);
+ success=0;
+ }
+ else
+ {
+ success=4;
+ }
+ break;
+ }
+ default:
+ success=1;
+ break;
+ }
+ return (success);
+}
+
+/****************************************************************************
+****************************************************************************/
+uint32 add_a_printer_driver(NT_PRINTER_DRIVER_INFO_LEVEL driver, uint32 level)
+{
+ uint32 success;
+ DEBUG(4,("adding a printer at level [%d]\n", level));
+ dump_a_printer_driver(driver, level);
+
+ switch (level)
+ {
+ case 3:
+ {
+ success=add_a_printer_driver_3(driver.info_3);
+ break;
+ }
+ default:
+ success=1;
+ break;
+ }
+
+ return (success);
+}
+/****************************************************************************
+****************************************************************************/
+uint32 get_a_printer_driver(NT_PRINTER_DRIVER_INFO_LEVEL *driver, uint32 level,
+ fstring printername, fstring architecture)
+{
+ uint32 success;
+
+ switch (level)
+ {
+ case 3:
+ {
+ success=get_a_printer_driver_3(&(driver->info_3),
+ printername,
+ architecture);
+ break;
+ }
+ default:
+ success=1;
+ break;
+ }
+
+ dump_a_printer_driver(*driver, level);
+ return (success);
+}
+
+/****************************************************************************
+****************************************************************************/
+uint32 free_a_printer_driver(NT_PRINTER_DRIVER_INFO_LEVEL driver, uint32 level)
+{
+ uint32 success;
+
+ switch (level)
+ {
+ case 3:
+ {
+ if (driver.info_3 != NULL)
+ {
+ free(driver.info_3);
+ success=0;
+ }
+ else
+ {
+ success=4;
+ }
+ break;
+ }
+ default:
+ success=1;
+ break;
+ }
+ return (success);
+}
+
+/****************************************************************************
+****************************************************************************/
+BOOL get_specific_param_by_index(NT_PRINTER_INFO_LEVEL printer, uint32 level, uint32 param_index,
+ fstring value, uint8 **data, uint32 *type, uint32 *len)
+{
+ /* right now that's enough ! */
+ NT_PRINTER_PARAM *param;
+ int i=0;
+
+ param=printer.info_2->specific;
+
+ while (param != NULL && i < param_index)
+ {
+ param=param->next;
+ i++;
+ }
+
+ if (param != NULL)
+ {
+ /* exited because it exist */
+ *type=param->type;
+ StrnCpy(value, param->value, sizeof(value)-1);
+ *data=(uint8 *)malloc(param->data_len*sizeof(uint8));
+ memcpy(*data, param->data, param->data_len);
+ *len=param->data_len;
+ return (True);
+ }
+ return (False);
+}
+
+/****************************************************************************
+****************************************************************************/
+BOOL get_specific_param(NT_PRINTER_INFO_LEVEL printer, uint32 level,
+ fstring value, uint8 **data, uint32 *type, uint32 *len)
+{
+ /* right now that's enough ! */
+ NT_PRINTER_PARAM *param;
+
+ DEBUG(5, ("get_specific_param\n"));
+
+ param=printer.info_2->specific;
+
+ while (param != NULL)
+ {
+ if ( !strcmp(value, param->value)
+ && strlen(value)==strlen(param->value))
+ break;
+
+ param=param->next;
+ }
+
+ DEBUG(6, ("found one param\n"));
+ if (param != NULL)
+ {
+ /* exited because it exist */
+ *type=param->type;
+
+ *data=(uint8 *)malloc(param->data_len*sizeof(uint8));
+ memcpy(*data, param->data, param->data_len);
+ *len=param->data_len;
+
+ DEBUG(6, ("exit of get_specific_param:true\n"));
+ return (True);
+ }
+ DEBUG(6, ("exit of get_specific_param:false\n"));
+ return (False);
+}
+
+/****************************************************************************
+****************************************************************************/
+void init_devicemode(NT_DEVICEMODE *nt_devmode)
+{
+/*
+ * should I init this ones ???
+ nt_devmode->devicename
+*/
+ StrCpy(nt_devmode->formname, "A4");
+
+ nt_devmode->specversion = 0x0401;
+ nt_devmode->driverversion = 0x0400;
+ nt_devmode->size = 0x00DC;
+ nt_devmode->driverextra = 0x0000;
+ nt_devmode->fields = FORMNAME | TTOPTION | PRINTQUALITY |
+ DEFAULTSOURCE | COPIES | SCALE |
+ PAPERSIZE | ORIENTATION;
+ nt_devmode->orientation = 2;
+ nt_devmode->papersize = PAPER_A4;
+ nt_devmode->paperlength = 0;
+ nt_devmode->paperwidth = 0;
+ nt_devmode->scale = 0x64;
+ nt_devmode->copies = 01;
+ nt_devmode->defaultsource = BIN_FORMSOURCE;
+ nt_devmode->printquality = 0x0258;
+ nt_devmode->color = COLOR_MONOCHROME;
+ nt_devmode->duplex = DUP_SIMPLEX;
+ nt_devmode->yresolution = 0;
+ nt_devmode->ttoption = TT_SUBDEV;
+ nt_devmode->collate = COLLATE_FALSE;
+ nt_devmode->icmmethod = 0;
+ nt_devmode->icmintent = 0;
+ nt_devmode->mediatype = 0;
+ nt_devmode->dithertype = 0;
+
+ /* non utilisés par un driver d'imprimante */
+ nt_devmode->logpixels = 0;
+ nt_devmode->bitsperpel = 0;
+ nt_devmode->pelswidth = 0;
+ nt_devmode->pelsheight = 0;
+ nt_devmode->displayflags = 0;
+ nt_devmode->displayfrequency = 0;
+ nt_devmode->reserved1 = 0;
+ nt_devmode->reserved2 = 0;
+ nt_devmode->panningwidth = 0;
+ nt_devmode->panningheight = 0;
+
+ nt_devmode->private=NULL;
+}
+
+/* error code:
+ 0: everything OK
+ 1: level not implemented
+ 2: file doesn't exist
+ 3: can't allocate memory
+ 4: can't free memory
+ 5: non existant struct
+*/
+
+/*
+ A printer and a printer driver are 2 different things.
+ NT manages them separatelly, Samba does the same.
+ Why ? Simply because it's easier and it makes sense !
+
+ Now explanation: You have 3 printers behind your samba server,
+ 2 of them are the same make and model (laser A and B). But laser B
+ has an 3000 sheet feeder and laser A doesn't such an option.
+ Your third printer is an old dot-matrix model for the accounting :-).
+
+ If the /usr/local/samba/lib directory (default dir), you will have
+ 5 files to describe all of this.
+
+ 3 files for the printers (1 by printer):
+ NTprinter_laser A
+ NTprinter_laser B
+ NTprinter_accounting
+ 2 files for the drivers (1 for the laser and 1 for the dot matrix)
+ NTdriver_printer model X
+ NTdriver_printer model Y
+
+jfm: I should use this comment for the text file to explain
+ same thing for the forms BTW.
+ Je devrais mettre mes commentaires en francais, ca serait mieux :-)
+
+*/
+
+
--- /dev/null
+/*
+ * Unix SMB/Netbios implementation.
+ * Version 1.9.
+ * RPC Pipe client / server routines
+ * Copyright (C) Andrew Tridgell 1992-1998,
+ * Copyright (C) Luke Kenneth Casson Leighton 1996-1998,
+ * Copyright (C) Jean François Micouleau 1998.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include "includes.h"
+#include "nterr.h"
+
+extern int DEBUGLEVEL;
+
+
+/*******************************************************************
+return the length of a UNISTR string.
+********************************************************************/
+static uint32 str_len_uni(UNISTR *source)
+{
+ uint32 i=0;
+
+ while (source->buffer[i]!=0x0000)
+ {
+ i++;
+ }
+ return i;
+}
+
+/*******************************************************************
+This should be moved in a more generic lib.
+********************************************************************/
+static void spoolss_io_system_time(char *desc, prs_struct *ps, int depth, SYSTEMTIME *systime)
+{
+ prs_uint16("year", ps, depth, &(systime->year));
+ prs_uint16("month", ps, depth, &(systime->month));
+ prs_uint16("dayofweek", ps, depth, &(systime->dayofweek));
+ prs_uint16("day", ps, depth, &(systime->day));
+ prs_uint16("hour", ps, depth, &(systime->hour));
+ prs_uint16("minute", ps, depth, &(systime->minute));
+ prs_uint16("second", ps, depth, &(systime->second));
+ prs_uint16("milliseconds", ps, depth, &(systime->milliseconds));
+}
+
+/*******************************************************************
+********************************************************************/
+void make_systemtime(SYSTEMTIME *systime, struct tm *unixtime)
+{
+ systime->year=unixtime->tm_year+1900;
+ systime->month=unixtime->tm_mon+1;
+ systime->dayofweek=unixtime->tm_wday;
+ systime->day=unixtime->tm_mday;
+ systime->hour=unixtime->tm_hour;
+ systime->minute=unixtime->tm_min;
+ systime->second=unixtime->tm_sec;
+ systime->milliseconds=0;
+}
+
+/*******************************************************************
+reads or writes an PRINTER_HND structure.
+********************************************************************/
+static void smb_io_prt_hnd(char *desc, PRINTER_HND *hnd, prs_struct *ps, int depth)
+{
+ if (hnd == NULL) return;
+
+ prs_debug(ps, depth, desc, "smb_io_prt_hnd");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint8s (False, "data", ps, depth, hnd->data, PRINTER_HND_SIZE);
+}
+
+/*******************************************************************
+reads or writes an DOC_INFO structure.
+********************************************************************/
+static void smb_io_doc_info_1(char *desc, DOC_INFO_1 *info_1, prs_struct *ps, int depth)
+{
+ if (info_1 == NULL) return;
+
+ prs_debug(ps, depth, desc, "smb_io_doc_info_1");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("p_docname", ps, depth, &(info_1->p_docname));
+ prs_uint32("p_outputfile", ps, depth, &(info_1->p_outputfile));
+ prs_uint32("p_datatype", ps, depth, &(info_1->p_datatype));
+
+ if (info_1->p_docname)
+ smb_io_unistr2("", &(info_1->docname),True,ps,depth);
+ if (info_1->p_outputfile)
+ smb_io_unistr2("", &(info_1->outputfile),True,ps,depth);
+ if (info_1->p_datatype)
+ smb_io_unistr2("", &(info_1->datatype),True,ps,depth);
+}
+
+/*******************************************************************
+reads or writes an DOC_INFO structure.
+********************************************************************/
+static void smb_io_doc_info(char *desc, DOC_INFO *info, prs_struct *ps, int depth)
+{
+ uint32 useless_ptr=0;
+
+ if (info == NULL) return;
+
+ prs_debug(ps, depth, desc, "smb_io_doc_info");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("switch_value", ps, depth, &(info->switch_value));
+
+ prs_uint32("doc_info_X ptr", ps, depth, &(useless_ptr));
+
+ switch (info->switch_value)
+ {
+ case 1:
+ smb_io_doc_info_1("",&(info->doc_info_1), ps, depth);
+ break;
+ case 2:
+ /*
+ this is just a placeholder
+
+ MSDN July 1998 says doc_info_2 is only on
+ Windows 95, and as Win95 doesn't do RPC to print
+ this case is nearly impossible
+
+ Maybe one day with Windows for dishwasher 2037 ...
+
+ */
+ /* smb_io_doc_info_2("",&(info->doc_info_2), ps, depth); */
+ break;
+ default:
+ DEBUG(0,("Something is obviously wrong somewhere !\n"));
+ break;
+ }
+}
+
+/*******************************************************************
+reads or writes an DOC_INFO_CONTAINER structure.
+********************************************************************/
+static void smb_io_doc_info_container(char *desc, DOC_INFO_CONTAINER *cont, prs_struct *ps, int depth)
+{
+ if (cont == NULL) return;
+
+ prs_debug(ps, depth, desc, "smb_io_doc_info_container");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("level", ps, depth, &(cont->level));
+
+ smb_io_doc_info("",&(cont->docinfo), ps, depth);
+}
+
+/*******************************************************************
+reads or writes an NOTIFY OPTION TYPE structure.
+********************************************************************/
+static void smb_io_notify_option_type(char *desc,
+ SPOOL_NOTIFY_OPTION_TYPE *type,
+ prs_struct *ps, int depth)
+{
+ uint32 useless_ptr;
+
+ prs_debug(ps, depth, desc, "smb_io_notify_option_type");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint16("type", ps, depth, &(type->type));
+ prs_uint16("reserved0", ps, depth, &(type->reserved0));
+ prs_uint32("reserved1", ps, depth, &(type->reserved1));
+ prs_uint32("reserved2", ps, depth, &(type->reserved2));
+ prs_uint32("count", ps, depth, &(type->count));
+ prs_uint32("useless ptr", ps, depth, &useless_ptr);
+
+}
+
+/*******************************************************************
+reads or writes an NOTIFY OPTION TYPE DATA.
+********************************************************************/
+static void smb_io_notify_option_type_data(char *desc,
+ SPOOL_NOTIFY_OPTION_TYPE *type,
+ prs_struct *ps, int depth)
+{
+ uint32 count;
+ int i;
+
+ prs_debug(ps, depth, desc, "smb_io_notify_option_type_data");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("count", ps, depth, &count);
+
+ if (count != type->count)
+ {
+ DEBUG(4,("What a mess, count was %x now is %x !\n",type->count,count));
+ type->count=count;
+ }
+ for(i=0;i<count;i++)
+ {
+ /* read the option type struct */
+ prs_uint16("fields",ps,depth,&(type->fields[i]));
+ }
+}
+
+/*******************************************************************
+reads or writes an NOTIFY OPTION structure.
+********************************************************************/
+static void smb_io_notify_option(char *desc, SPOOL_NOTIFY_OPTION *option,
+ prs_struct *ps, int depth)
+{
+ uint32 useless_ptr;
+ int i;
+
+ prs_debug(ps, depth, desc, "smb_io_notify_option");
+ depth++;
+
+ prs_align(ps);
+
+ /* memory pointer to the struct */
+ prs_uint32("useless ptr", ps, depth, &useless_ptr);
+
+ prs_uint32("version", ps, depth, &(option->version));
+ prs_uint32("reserved", ps, depth, &(option->reserved));
+ prs_uint32("count", ps, depth, &(option->count));
+ prs_uint32("useless ptr", ps, depth, &useless_ptr);
+ prs_uint32("count", ps, depth, &(option->count));
+
+ /* read the option type struct */
+ for(i=0;i<option->count;i++)
+ {
+ smb_io_notify_option_type("",&(option->type[i]) ,ps, depth);
+ }
+
+ /* now read the type associated with the option type struct */
+ for(i=0;i<option->count;i++)
+ {
+ smb_io_notify_option_type_data("",&(option->type[i]) ,ps, depth);
+ }
+
+}
+
+
+/*******************************************************************
+reads or writes an NOTIFY INFO DATA structure.
+********************************************************************/
+static void smb_io_notify_info_data(char *desc,SPOOL_NOTIFY_INFO_DATA *data,
+ prs_struct *ps, int depth)
+{
+ uint32 useless_ptr=0xADDE0FF0;
+
+ uint32 how_many_words;
+ BOOL isvalue;
+ uint32 x;
+
+ prs_debug(ps, depth, desc, "smb_io_notify_info_data");
+ depth++;
+
+ how_many_words=data->size;
+ if (how_many_words==POINTER)
+ {
+ how_many_words=TWO_VALUE;
+ }
+
+ isvalue=data->enc_type;
+
+ prs_align(ps);
+ prs_uint16("type", ps, depth, &(data->type));
+ prs_uint16("field", ps, depth, &(data->field));
+ /*prs_align(ps);*/
+
+ prs_uint32("how many words", ps, depth, &how_many_words);
+ prs_uint32("id", ps, depth, &(data->id));
+ prs_uint32("how many words", ps, depth, &how_many_words);
+ /*prs_align(ps);*/
+
+ if (isvalue==True)
+ {
+ prs_uint32("value[0]", ps, depth, &(data->notify_data.value[0]));
+ prs_uint32("value[1]", ps, depth, &(data->notify_data.value[1]));
+ /*prs_align(ps);*/
+ }
+ else
+ {
+ /* it's a string */
+ /* length in ascii including \0 */
+ x=2*(data->notify_data.data.length+1);
+ prs_uint32("string length", ps, depth, &x );
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+ /*prs_align(ps);*/
+ }
+}
+
+/*******************************************************************
+reads or writes an NOTIFY INFO DATA structure.
+********************************************************************/
+void smb_io_notify_info_data_strings(char *desc,SPOOL_NOTIFY_INFO_DATA *data,
+ prs_struct *ps, int depth)
+{
+ uint32 x;
+ BOOL isvalue;
+
+ prs_debug(ps, depth, desc, "smb_io_notify_info_data");
+ depth++;
+
+ prs_align(ps);
+ isvalue=data->enc_type;
+
+ if (isvalue==False)
+ {
+ /* length of string in unicode include \0 */
+ x=data->notify_data.data.length+1;
+ prs_uint32("string length", ps, depth, &x );
+ prs_uint16s(True,"string",ps,depth,data->notify_data.data.string,x);
+ }
+ prs_align(ps);
+}
+
+/*******************************************************************
+reads or writes an NOTIFY INFO structure.
+********************************************************************/
+static void smb_io_notify_info(char *desc, SPOOL_NOTIFY_INFO *info,
+ prs_struct *ps, int depth)
+{
+ uint32 useless_ptr=0x0001;
+ int i;
+
+ info->version=0x02;
+ prs_debug(ps, depth, desc, "smb_io_notify_info");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+ prs_uint32("count", ps, depth, &(info->count));
+ prs_uint32("version", ps, depth, &(info->version));
+ prs_uint32("flags", ps, depth, &(info->flags));
+ prs_uint32("count", ps, depth, &(info->count));
+
+ for (i=0;i<info->count;i++)
+ {
+ prs_grow(ps);
+ smb_io_notify_info_data(desc, &(info->data[i]), ps, depth);
+ }
+
+ /* now do the strings at the end of the stream */
+ for (i=0;i<info->count;i++)
+ {
+ prs_grow(ps);
+ smb_io_notify_info_data_strings(desc, &(info->data[i]),
+ ps, depth);
+ }
+}
+
+/*******************************************************************
+ * write a structure.
+ * called from spoolss_r_open_printer (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_r_open_printer(char *desc, SPOOL_R_OPEN_PRINTER *r_u, prs_struct *ps, int depth)
+{
+ if (r_u == NULL) return;
+
+ prs_debug(ps, depth, desc, "spoolss_io_r_open_printer");
+ depth++;
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(r_u->handle),ps,depth);
+
+/* prs_align(ps);*/
+
+ prs_uint32("status code", ps, depth, &(r_u->status));
+
+}
+
+/*******************************************************************
+ * read a structure.
+ * called from spoolss_q_open_printer (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_q_open_printer(char *desc, SPOOL_Q_OPEN_PRINTER *q_u, prs_struct *ps, int depth)
+{
+ if (q_u == NULL) return;
+
+ prs_debug(ps, depth, desc, "spoolss_io_q_open_printer");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("unknown0", ps, depth, &(q_u->unknown0));
+ smb_io_unistr2("", &(q_u->printername),True,ps,depth);
+
+ prs_align(ps);
+
+ prs_uint32("unknown1", ps, depth, &(q_u->unknown1));
+ prs_uint32("cbbuf", ps, depth, &(q_u->cbbuf));
+ prs_uint32("devmod", ps, depth, &(q_u->devmod));
+ prs_uint32("access required", ps, depth, &(q_u->access_required));
+
+ /* don't care to decode end of packet by now */
+ /* but when acl will be implemented, it will be useful */
+
+ prs_uint32("unknown2", ps, depth, &(q_u->unknown2));
+ prs_uint32("unknown3", ps, depth, &(q_u->unknown3));
+ prs_uint32("unknown4", ps, depth, &(q_u->unknown4));
+ prs_uint32("unknown5", ps, depth, &(q_u->unknown5));
+ prs_uint32("unknown6", ps, depth, &(q_u->unknown6));
+ prs_uint32("unknown7", ps, depth, &(q_u->unknown7));
+ prs_uint32("unknown8", ps, depth, &(q_u->unknown8));
+ prs_uint32("unknown9", ps, depth, &(q_u->unknown9));
+ prs_uint32("unknown10", ps, depth, &(q_u->unknown10));
+ prs_uint32("unknown11", ps, depth, &(q_u->unknown11));
+
+ smb_io_unistr2("", &(q_u->station),True,ps,depth);
+ prs_align(ps);
+ smb_io_unistr2("", &(q_u->username),True,ps,depth);
+}
+
+/*******************************************************************
+ * read a structure.
+ * called from spoolss_q_getprinterdata (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_q_getprinterdata(char *desc, SPOOL_Q_GETPRINTERDATA *q_u, prs_struct *ps, int depth)
+{
+ if (q_u == NULL) return;
+
+ prs_debug(ps, depth, desc, "spoolss_io_q_getprinterdata");
+ depth++;
+
+ prs_align(ps);
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+ prs_align(ps);
+ smb_io_unistr2("", &(q_u->valuename),True,ps,depth);
+ prs_align(ps);
+ prs_uint32("size", ps, depth, &(q_u->size));
+}
+
+/*******************************************************************
+ * write a structure.
+ * called from spoolss_r_getprinterdata (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_r_getprinterdata(char *desc, SPOOL_R_GETPRINTERDATA *r_u, prs_struct *ps, int depth)
+{
+ if (r_u == NULL) return;
+
+ prs_debug(ps, depth, desc, "spoolss_io_r_getprinterdata");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("type", ps, depth, &(r_u->type));
+ prs_uint32("size", ps, depth, &(r_u->size));
+
+ switch (r_u->type)
+ {
+ case 0x1:
+ case 0x3:
+ case 0x4:
+ prs_uint8s(False,"data", ps, depth, r_u->data, r_u->size);
+ prs_align(ps);
+ break;
+ }
+
+ prs_uint32("needed", ps, depth, &(r_u->needed));
+ prs_uint32("status", ps, depth, &(r_u->status));
+ prs_align(ps);
+}
+
+/*******************************************************************
+ * read a structure.
+ * called from spoolss_q_closeprinter (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_q_closeprinter(char *desc, SPOOL_Q_CLOSEPRINTER *q_u, prs_struct *ps, int depth)
+{
+ if (q_u == NULL) return;
+
+ prs_debug(ps, depth, desc, "spoolss_io_q_closeprinter");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+}
+
+/*******************************************************************
+ * write a structure.
+ * called from spoolss_r_closeprinter (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_r_closeprinter(char *desc, SPOOL_R_CLOSEPRINTER *r_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_r_closeprinter");
+ depth++;
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(r_u->handle),ps,depth);
+ prs_uint32("status", ps, depth, &(r_u->status));
+
+}
+
+/*******************************************************************
+ * read a structure.
+ * called from spoolss_q_startdocprinter (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_q_startdocprinter(char *desc, SPOOL_Q_STARTDOCPRINTER *q_u, prs_struct *ps, int depth)
+{
+ if (q_u == NULL) return;
+
+ prs_debug(ps, depth, desc, "spoolss_io_q_startdocprinter");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+
+ smb_io_doc_info_container("",&(q_u->doc_info_container), ps, depth);
+}
+
+/*******************************************************************
+ * write a structure.
+ * called from spoolss_r_startdocprinter (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_r_startdocprinter(char *desc, SPOOL_R_STARTDOCPRINTER *r_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_r_startdocprinter");
+ depth++;
+ prs_uint32("jobid", ps, depth, &(r_u->jobid));
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+ * read a structure.
+ * called from spoolss_q_enddocprinter (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_q_enddocprinter(char *desc, SPOOL_Q_ENDDOCPRINTER *q_u, prs_struct *ps, int depth)
+{
+ if (q_u == NULL) return;
+
+ prs_debug(ps, depth, desc, "spoolss_io_q_enddocprinter");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+}
+
+/*******************************************************************
+ * write a structure.
+ * called from spoolss_r_enddocprinter (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_r_enddocprinter(char *desc, SPOOL_R_ENDDOCPRINTER *r_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_r_enddocprinter");
+ depth++;
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+ * read a structure.
+ * called from spoolss_q_startpageprinter (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_q_startpageprinter(char *desc, SPOOL_Q_STARTPAGEPRINTER *q_u, prs_struct *ps, int depth)
+{
+ if (q_u == NULL) return;
+
+ prs_debug(ps, depth, desc, "spoolss_io_q_startpageprinter");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+}
+
+/*******************************************************************
+ * write a structure.
+ * called from spoolss_r_startpageprinter (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_r_startpageprinter(char *desc, SPOOL_R_STARTPAGEPRINTER *r_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_r_startpageprinter");
+ depth++;
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+ * read a structure.
+ * called from spoolss_q_endpageprinter (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_q_endpageprinter(char *desc, SPOOL_Q_ENDPAGEPRINTER *q_u, prs_struct *ps, int depth)
+{
+ if (q_u == NULL) return;
+
+ prs_debug(ps, depth, desc, "spoolss_io_q_endpageprinter");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+}
+
+/*******************************************************************
+ * write a structure.
+ * called from spoolss_r_endpageprinter (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_r_endpageprinter(char *desc, SPOOL_R_ENDPAGEPRINTER *r_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_r_endpageprinter");
+ depth++;
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+ * read a structure.
+ * called from spoolss_q_writeprinter (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_q_writeprinter(char *desc, SPOOL_Q_WRITEPRINTER *q_u, prs_struct *ps, int depth)
+{
+ if (q_u == NULL) return;
+
+ prs_debug(ps, depth, desc, "spoolss_io_q_writeprinter");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+ prs_uint32("buffer_size", ps, depth, &(q_u->buffer_size));
+
+ if (q_u->buffer_size!=0)
+ {
+ q_u->buffer=(uint8 *)malloc(q_u->buffer_size*sizeof(uint8));
+ prs_uint8s(True, "buffer", ps, depth, q_u->buffer, q_u->buffer_size);
+ }
+ prs_align(ps);
+ prs_uint32("buffer_size2", ps, depth, &(q_u->buffer_size2));
+}
+
+/*******************************************************************
+ * write a structure.
+ * called from spoolss_r_writeprinter (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_r_writeprinter(char *desc, SPOOL_R_WRITEPRINTER *r_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_r_writeprinter");
+ depth++;
+ prs_uint32("buffer_written", ps, depth, &(r_u->buffer_written));
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+ * read a structure.
+ * called from spoolss_q_rffpcnex (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_q_rffpcnex(char *desc, SPOOL_Q_RFFPCNEX *q_u,
+ prs_struct *ps, int depth)
+{
+ uint32 useless_ptr;
+
+ prs_debug(ps, depth, desc, "spoolss_io_q_rffpcnex");
+ depth++;
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+ prs_uint32("flags", ps, depth, &(q_u->flags));
+ prs_uint32("options", ps, depth, &(q_u->options));
+ prs_uint32("useless ptr", ps, depth, &useless_ptr);
+ /*prs_align(ps);*/
+
+ smb_io_unistr2("", &(q_u->localmachine), True, ps, depth);
+
+ prs_align(ps);
+ prs_uint32("printerlocal", ps, depth, &(q_u->printerlocal));
+
+ smb_io_notify_option("notify option", &(q_u->option), ps, depth);
+
+}
+
+/*******************************************************************
+ * write a structure.
+ * called from spoolss_r_rffpcnex (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_r_rffpcnex(char *desc, SPOOL_R_RFFPCNEX *r_u,
+ prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_r_rffpcnex");
+ depth++;
+
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+ * read a structure.
+ * called from spoolss_q_rfnpcnex (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_q_rfnpcnex(char *desc, SPOOL_Q_RFNPCNEX *q_u,
+ prs_struct *ps, int depth)
+{
+
+ prs_debug(ps, depth, desc, "spoolss_io_q_rfnpcnex");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+
+ prs_uint32("change", ps, depth, &(q_u->change));
+
+ smb_io_notify_option("notify option",&(q_u->option),ps,depth);
+}
+
+/*******************************************************************
+ * write a structure.
+ * called from spoolss_r_rfnpcnex (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_r_rfnpcnex(char *desc,
+ SPOOL_R_RFNPCNEX *r_u,
+ prs_struct *ps, int depth)
+{
+ uint32 x=0x0;
+
+ prs_debug(ps, depth, desc, "spoolss_io_r_rfnpcnex");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_notify_info("notify info",&(r_u->info),ps,depth);
+ prs_align(ps);
+ prs_uint32("status", ps, depth, &(x));
+}
+
+/*******************************************************************
+ * return the length of a uint32 (obvious, but the code is clean)
+ ********************************************************************/
+static uint32 size_of_uint32(uint32 *value)
+{
+ return (sizeof(*value));
+}
+
+/*******************************************************************
+ * return the length of a UNICODE string in number of char, includes:
+ * - the leading zero
+ * - the relative pointer size
+ ********************************************************************/
+static uint32 size_of_relative_string(UNISTR *string)
+{
+ uint32 size=0;
+
+ size=str_len_uni(string); /* the string length */
+ size=size+1; /* add the leading zero */
+ size=size*2; /* convert in char */
+ size=size+4; /* add the size of the ptr */
+ return (size);
+}
+
+/*******************************************************************
+ * return the length of a uint32 (obvious, but the code is clean)
+ ********************************************************************/
+static uint32 size_of_device_mode(DEVICEMODE *devmode)
+{
+ if (devmode==NULL)
+ return (4);
+ else
+ return (0xDC+4);
+}
+
+/*******************************************************************
+ * return the length of a uint32 (obvious, but the code is clean)
+ ********************************************************************/
+static uint32 size_of_systemtime(SYSTEMTIME *systime)
+{
+ if (systime==NULL)
+ return (4);
+ else
+ return (sizeof(SYSTEMTIME) +4);
+}
+
+/*******************************************************************
+ * write a UNICODE string.
+ * used by all the RPC structs passing a buffer
+ ********************************************************************/
+static void spoolss_smb_io_unistr(char *desc, UNISTR *uni, prs_struct *ps, int depth)
+{
+ if (uni == NULL) return;
+
+ prs_debug(ps, depth, desc, "spoolss_smb_io_unistr");
+ depth++;
+ prs_unistr("unistr", ps, depth, uni);
+}
+
+
+/*******************************************************************
+ * write a UNICODE string and its relative pointer.
+ * used by all the RPC structs passing a buffer
+ ********************************************************************/
+static void smb_io_relstr(char *desc, prs_struct *ps, int depth, UNISTR *buffer,
+ uint32 *start_offset, uint32 *end_offset)
+{
+ uint32 struct_offset;
+ uint32 relative_offset;
+
+ struct_offset=ps->offset;
+ *end_offset-= 2*(str_len_uni(buffer)+1);
+ ps->offset=*end_offset;
+ spoolss_smb_io_unistr(desc, buffer, ps, depth);
+
+ ps->offset=struct_offset;
+ relative_offset=*end_offset-*start_offset;
+
+ prs_uint32("offset", ps, depth, &(relative_offset));
+}
+
+/*******************************************************************
+ * write a DEVICEMODE struct.
+ * on reading allocate memory for the private member
+ ********************************************************************/
+static void smb_io_devmode(char *desc, prs_struct *ps, int depth, DEVICEMODE *devmode)
+{
+ prs_debug(ps, depth, desc, "smb_io_devmode");
+ depth++;
+
+ prs_uint16s(True,"devicename", ps, depth, devmode->devicename.buffer, 32);
+ prs_uint16("specversion", ps, depth, &(devmode->specversion));
+ prs_uint16("driverversion", ps, depth, &(devmode->driverversion));
+ prs_uint16("size", ps, depth, &(devmode->size));
+ prs_uint16("driverextra", ps, depth, &(devmode->driverextra));
+ prs_uint32("fields", ps, depth, &(devmode->fields));
+ prs_uint16("orientation", ps, depth, &(devmode->orientation));
+ prs_uint16("papersize", ps, depth, &(devmode->papersize));
+ prs_uint16("paperlength", ps, depth, &(devmode->paperlength));
+ prs_uint16("paperwidth", ps, depth, &(devmode->paperwidth));
+ prs_uint16("scale", ps, depth, &(devmode->scale));
+ prs_uint16("copies", ps, depth, &(devmode->copies));
+ prs_uint16("defaultsource", ps, depth, &(devmode->defaultsource));
+ prs_uint16("printquality", ps, depth, &(devmode->printquality));
+ prs_uint16("color", ps, depth, &(devmode->color));
+ prs_uint16("duplex", ps, depth, &(devmode->duplex));
+ prs_uint16("yresolution", ps, depth, &(devmode->yresolution));
+ prs_uint16("ttoption", ps, depth, &(devmode->ttoption));
+ prs_uint16("collate", ps, depth, &(devmode->collate));
+ prs_uint16s(True, "formname", ps, depth, devmode->formname.buffer, 32);
+ prs_uint16("logpixels", ps, depth, &(devmode->logpixels));
+ prs_uint32("bitsperpel", ps, depth, &(devmode->bitsperpel));
+ prs_uint32("pelswidth", ps, depth, &(devmode->pelswidth));
+ prs_uint32("pelsheight", ps, depth, &(devmode->pelsheight));
+ prs_uint32("displayflags", ps, depth, &(devmode->displayflags));
+ prs_uint32("displayfrequency", ps, depth, &(devmode->displayfrequency));
+ prs_uint32("icmmethod", ps, depth, &(devmode->icmmethod));
+ prs_uint32("icmintent", ps, depth, &(devmode->icmintent));
+ prs_uint32("mediatype", ps, depth, &(devmode->mediatype));
+ prs_uint32("dithertype", ps, depth, &(devmode->dithertype));
+ prs_uint32("reserved1", ps, depth, &(devmode->reserved1));
+ prs_uint32("reserved2", ps, depth, &(devmode->reserved2));
+ prs_uint32("panningwidth", ps, depth, &(devmode->panningwidth));
+ prs_uint32("panningheight", ps, depth, &(devmode->panningheight));
+
+ if (devmode->driverextra!=0)
+ {
+ if (ps->io)
+ {
+ devmode->private=(uint8 *)malloc(devmode->driverextra*sizeof(uint8));
+ DEBUG(7,("smb_io_devmode: allocated memory [%d] for private\n",devmode->driverextra));
+ }
+ DEBUG(7,("smb_io_devmode: parsing [%d] bytes of private\n",devmode->driverextra));
+
+ prs_uint8s(True, "private", ps, depth, devmode->private, devmode->driverextra);
+ DEBUG(8,("smb_io_devmode: parsed\n"));
+ }
+}
+
+/*******************************************************************
+ * write a DEVMODE struct and its relative pointer.
+ * used by all the RPC structs passing a buffer
+ ********************************************************************/
+static void smb_io_reldevmode(char *desc, prs_struct *ps, int depth, DEVICEMODE *devmode,
+ uint32 *start_offset, uint32 *end_offset)
+{
+ uint32 struct_offset;
+ uint32 relative_offset;
+
+ prs_debug(ps, depth, desc, "smb_io_reldevmode");
+ depth++;
+
+ struct_offset=ps->offset;
+ *end_offset-= (devmode->size+devmode->driverextra);
+ ps->offset=*end_offset;
+
+ smb_io_devmode(desc, ps, depth, devmode);
+
+ ps->offset=struct_offset;
+ relative_offset=*end_offset-*start_offset;
+
+ prs_uint32("offset", ps, depth, &(relative_offset));
+}
+
+/*******************************************************************
+********************************************************************/
+static void smb_io_printer_info_0(char *desc, PRINTER_INFO_0 *info, prs_struct *ps, int depth,
+ uint32 *start_offset, uint32 *end_offset)
+{
+ prs_debug(ps, depth, desc, "smb_io_printer_info_0");
+ depth++;
+ *start_offset=ps->offset;
+
+ smb_io_relstr("printername",ps, depth, &(info->printername), start_offset, end_offset);
+ smb_io_relstr("servername",ps, depth, &(info->servername), start_offset, end_offset);
+ prs_uint32("cjobs", ps, depth, &(info->cjobs));
+ prs_uint32("attributes", ps, depth, &(info->attributes));
+
+ prs_uint32("unknown0", ps, depth, &(info->unknown0));
+ prs_uint32("unknown1", ps, depth, &(info->unknown1));
+ prs_uint32("unknown2", ps, depth, &(info->unknown2));
+ prs_uint32("unknown3", ps, depth, &(info->unknown3));
+ prs_uint32("unknown4", ps, depth, &(info->unknown4));
+ prs_uint32("unknown5", ps, depth, &(info->unknown5));
+ prs_uint32("unknown6", ps, depth, &(info->unknown6));
+ prs_uint16("majorversion", ps, depth, &(info->majorversion));
+ prs_uint16("buildversion", ps, depth, &(info->buildversion));
+ prs_uint32("unknown7", ps, depth, &(info->unknown7));
+ prs_uint32("unknown8", ps, depth, &(info->unknown8));
+ prs_uint32("unknown9", ps, depth, &(info->unknown9));
+ prs_uint32("unknown10", ps, depth, &(info->unknown10));
+ prs_uint32("unknown11", ps, depth, &(info->unknown11));
+ prs_uint32("unknown12", ps, depth, &(info->unknown12));
+ prs_uint32("unknown13", ps, depth, &(info->unknown13));
+ prs_uint32("unknown14", ps, depth, &(info->unknown14));
+ prs_uint32("unknown15", ps, depth, &(info->unknown15));
+ prs_uint32("unknown16", ps, depth, &(info->unknown16));
+ prs_uint32("unknown17", ps, depth, &(info->unknown17));
+ prs_uint32("unknown18", ps, depth, &(info->unknown18));
+ prs_uint32("status" , ps, depth, &(info->status));
+ prs_uint32("unknown20", ps, depth, &(info->unknown20));
+ prs_uint32("unknown21", ps, depth, &(info->unknown21));
+ prs_uint16("unknown22", ps, depth, &(info->unknown22));
+ prs_uint32("unknown23", ps, depth, &(info->unknown23));
+}
+
+/*******************************************************************
+********************************************************************/
+static void smb_io_printer_info_1(char *desc, PRINTER_INFO_1 *info, prs_struct *ps, int depth,
+ uint32 *start_offset, uint32 *end_offset)
+{
+ prs_debug(ps, depth, desc, "smb_io_printer_info_1");
+ depth++;
+ *start_offset=ps->offset;
+
+ prs_uint32("flags", ps, depth, &(info->flags));
+ smb_io_relstr("description",ps, depth, &(info->description), start_offset, end_offset);
+ smb_io_relstr("name",ps, depth, &(info->name), start_offset, end_offset);
+ smb_io_relstr("comment",ps, depth, &(info->comment), start_offset, end_offset);
+}
+
+/*******************************************************************
+********************************************************************/
+static void smb_io_printer_info_2(char *desc, PRINTER_INFO_2 *info, prs_struct *ps, int depth,
+ uint32 *start_offset, uint32 *end_offset)
+{
+ uint32 pipo=0;
+
+ prs_debug(ps, depth, desc, "smb_io_printer_info_2");
+ depth++;
+ *start_offset=ps->offset;
+
+ smb_io_relstr("servername", ps, depth, &(info->servername), start_offset, end_offset);
+ smb_io_relstr("printername", ps, depth, &(info->printername), start_offset, end_offset);
+ smb_io_relstr("sharename", ps, depth, &(info->sharename), start_offset, end_offset);
+ smb_io_relstr("portname", ps, depth, &(info->portname), start_offset, end_offset);
+ smb_io_relstr("drivername", ps, depth, &(info->drivername), start_offset, end_offset);
+ smb_io_relstr("comment", ps, depth, &(info->comment), start_offset, end_offset);
+ smb_io_relstr("location", ps, depth, &(info->location), start_offset, end_offset);
+
+ smb_io_reldevmode("devmode", ps, depth, info->devmode, start_offset, end_offset);
+
+ smb_io_relstr("sepfile", ps, depth, &(info->sepfile), start_offset, end_offset);
+ smb_io_relstr("printprocessor",ps, depth, &(info->printprocessor), start_offset, end_offset);
+ smb_io_relstr("datatype", ps, depth, &(info->datatype), start_offset, end_offset);
+ smb_io_relstr("parameters", ps, depth, &(info->parameters), start_offset, end_offset);
+
+ prs_uint32("security descriptor", ps, depth, &(pipo));
+
+ prs_uint32("attributes", ps, depth, &(info->attributes));
+ prs_uint32("priority", ps, depth, &(info->priority));
+ prs_uint32("defpriority", ps, depth, &(info->defaultpriority));
+ prs_uint32("starttime", ps, depth, &(info->starttime));
+ prs_uint32("untiltime", ps, depth, &(info->untiltime));
+ prs_uint32("status", ps, depth, &(info->status));
+ prs_uint32("jobs", ps, depth, &(info->cjobs));
+ prs_uint32("averageppm", ps, depth, &(info->averageppm));
+}
+
+/*******************************************************************
+********************************************************************/
+static void smb_io_printer_driver_info_1(char *desc, DRIVER_INFO_1 *info, prs_struct *ps, int depth,
+ uint32 *start_offset, uint32 *end_offset)
+{
+ prs_debug(ps, depth, desc, "smb_io_printer_driver_info_1");
+ depth++;
+ *start_offset=ps->offset;
+
+ smb_io_relstr("name", ps, depth, &(info->name), start_offset, end_offset);
+}
+
+/*******************************************************************
+********************************************************************/
+static void smb_io_printer_driver_info_2(char *desc, DRIVER_INFO_2 *info,prs_struct *ps, int depth,
+ uint32 *start_offset, uint32 *end_offset)
+{
+ prs_debug(ps, depth, desc, "smb_io_printer_xxx");
+ depth++;
+ *start_offset=ps->offset;
+
+ prs_uint32("version", ps, depth, &(info->version));
+ smb_io_relstr("name", ps, depth, &(info->name), start_offset, end_offset);
+ smb_io_relstr("architecture", ps, depth, &(info->architecture), start_offset, end_offset);
+ smb_io_relstr("driverpath", ps, depth, &(info->driverpath), start_offset, end_offset);
+ smb_io_relstr("datafile", ps, depth, &(info->datafile), start_offset, end_offset);
+ smb_io_relstr("configfile", ps, depth, &(info->configfile), start_offset, end_offset);
+}
+
+/*******************************************************************
+********************************************************************/
+static void smb_io_printer_driver_info_3(char *desc, DRIVER_INFO_3 *info,prs_struct *ps, int depth,
+ uint32 *start_offset, uint32 *end_offset)
+{
+ prs_debug(ps, depth, desc, "smb_io_printer_driver_info_3");
+ depth++;
+ *start_offset=ps->offset;
+
+ prs_uint32("version", ps, depth, &(info->version));
+ smb_io_relstr("name", ps, depth, &(info->name), start_offset, end_offset);
+ smb_io_relstr("architecture", ps, depth, &(info->architecture), start_offset, end_offset);
+ smb_io_relstr("driverpath", ps, depth, &(info->driverpath), start_offset, end_offset);
+ smb_io_relstr("datafile", ps, depth, &(info->datafile), start_offset, end_offset);
+ smb_io_relstr("configfile", ps, depth, &(info->configfile), start_offset, end_offset);
+ smb_io_relstr("helpfile", ps, depth, &(info->helpfile), start_offset, end_offset);
+ smb_io_relstr("dependentfiles", ps, depth, &(info->dependentfiles), start_offset, end_offset);
+ smb_io_relstr("monitorname", ps, depth, &(info->monitorname), start_offset, end_offset);
+ smb_io_relstr("defaultdatatype", ps, depth, &(info->defaultdatatype), start_offset, end_offset);
+}
+
+/*******************************************************************
+********************************************************************/
+static void smb_io_job_info_1(char *desc, JOB_INFO_1 *info, prs_struct *ps, int depth,
+ uint32 *start_offset, uint32 *end_offset)
+{
+ prs_debug(ps, depth, desc, "smb_io_job_info_1");
+ depth++;
+ *start_offset=ps->offset;
+
+ prs_uint32("jobid", ps, depth, &(info->jobid));
+ smb_io_relstr("printername",ps, depth, &(info->printername), start_offset, end_offset);
+ smb_io_relstr("machinename",ps, depth, &(info->machinename), start_offset, end_offset);
+ smb_io_relstr("username",ps, depth, &(info->username), start_offset, end_offset);
+ smb_io_relstr("document",ps, depth, &(info->document), start_offset, end_offset);
+ smb_io_relstr("datatype",ps, depth, &(info->datatype), start_offset, end_offset);
+ smb_io_relstr("text_status",ps, depth, &(info->text_status), start_offset, end_offset);
+ prs_uint32("status", ps, depth, &(info->status));
+ prs_uint32("priority", ps, depth, &(info->priority));
+ prs_uint32("position", ps, depth, &(info->position));
+ prs_uint32("totalpages", ps, depth, &(info->totalpages));
+ prs_uint32("pagesprinted", ps, depth, &(info->pagesprinted));
+ spoolss_io_system_time("submitted", ps, depth, &(info->submitted) );
+}
+
+/*******************************************************************
+********************************************************************/
+static void smb_io_job_info_2(char *desc, JOB_INFO_2 *info, prs_struct *ps, int depth,
+ uint32 *start_offset, uint32 *end_offset)
+{
+ int pipo=0;
+ prs_debug(ps, depth, desc, "smb_io_job_info_2");
+ depth++;
+ *start_offset=ps->offset;
+
+ prs_uint32("jobid", ps, depth, &(info->jobid));
+ smb_io_relstr("printername",ps, depth, &(info->printername), start_offset, end_offset);
+ smb_io_relstr("machinename",ps, depth, &(info->machinename), start_offset, end_offset);
+ smb_io_relstr("username",ps, depth, &(info->username), start_offset, end_offset);
+ smb_io_relstr("document",ps, depth, &(info->document), start_offset, end_offset);
+ smb_io_relstr("notifyname",ps, depth, &(info->notifyname), start_offset, end_offset);
+ smb_io_relstr("datatype",ps, depth, &(info->datatype), start_offset, end_offset);
+
+ smb_io_relstr("printprocessor",ps, depth, &(info->printprocessor), start_offset, end_offset);
+ smb_io_relstr("parameters",ps, depth, &(info->parameters), start_offset, end_offset);
+ smb_io_relstr("drivername",ps, depth, &(info->drivername), start_offset, end_offset);
+ smb_io_reldevmode("devmode", ps, depth, &(info->devmode), start_offset, end_offset);
+ smb_io_relstr("text_status",ps, depth, &(info->text_status), start_offset, end_offset);
+
+/* SEC_DESC sec_desc;*/
+ prs_uint32("Hack! sec desc", ps, depth, &pipo);
+
+ prs_uint32("status", ps, depth, &(info->status));
+ prs_uint32("priority", ps, depth, &(info->priority));
+ prs_uint32("position", ps, depth, &(info->position));
+ prs_uint32("starttime", ps, depth, &(info->starttime));
+ prs_uint32("untiltime", ps, depth, &(info->untiltime));
+ prs_uint32("totalpages", ps, depth, &(info->totalpages));
+ prs_uint32("size", ps, depth, &(info->size));
+ spoolss_io_system_time("submitted", ps, depth, &(info->submitted) );
+ prs_uint32("timeelapsed", ps, depth, &(info->timeelapsed));
+ prs_uint32("pagesprinted", ps, depth, &(info->pagesprinted));
+}
+
+/*******************************************************************
+********************************************************************/
+static void smb_io_form_1(char *desc, FORM_1 *info, prs_struct *ps, int depth,
+ uint32 *start_offset, uint32 *end_offset)
+{
+ prs_debug(ps, depth, desc, "smb_io_form_1");
+ depth++;
+ *start_offset=ps->offset;
+
+ prs_uint32("flag", ps, depth, &(info->flag));
+ smb_io_relstr("name",ps, depth, &(info->name), start_offset, end_offset);
+ prs_uint32("width", ps, depth, &(info->width));
+ prs_uint32("length", ps, depth, &(info->length));
+ prs_uint32("left", ps, depth, &(info->left));
+ prs_uint32("top", ps, depth, &(info->top));
+ prs_uint32("right", ps, depth, &(info->right));
+ prs_uint32("bottom", ps, depth, &(info->bottom));
+}
+
+/*******************************************************************
+********************************************************************/
+static void smb_io_port_2(char *desc, PORT_INFO_2 *info, prs_struct *ps, int depth,
+ uint32 *start_offset, uint32 *end_offset)
+{
+ prs_debug(ps, depth, desc, "smb_io_form_1");
+ depth++;
+ *start_offset=ps->offset;
+
+ smb_io_relstr("port_name",ps, depth, &(info->port_name), start_offset, end_offset);
+ smb_io_relstr("monitor_name",ps, depth, &(info->monitor_name), start_offset, end_offset);
+ smb_io_relstr("description",ps, depth, &(info->description), start_offset, end_offset);
+ prs_uint32("port_type", ps, depth, &(info->port_type));
+ prs_uint32("reserved", ps, depth, &(info->reserved));
+}
+
+/*******************************************************************
+return the size required by a struct in the stream
+********************************************************************/
+static uint32 spoolss_size_printer_info_0(PRINTER_INFO_0 *info)
+{
+ int size=0;
+
+ size+=size_of_uint32( &(info->attributes) );
+ size+=size_of_relative_string( &(info->printername) );
+ size+=size_of_relative_string( &(info->servername) );
+ return (size);
+}
+
+/*******************************************************************
+return the size required by a struct in the stream
+********************************************************************/
+static uint32 spoolss_size_printer_info_1(PRINTER_INFO_1 *info)
+{
+ int size=0;
+
+ size+=size_of_uint32( &(info->flags) );
+ size+=size_of_relative_string( &(info->description) );
+ size+=size_of_relative_string( &(info->name) );
+ size+=size_of_relative_string( &(info->comment) );
+ return (size);
+}
+
+/*******************************************************************
+return the size required by a struct in the stream
+********************************************************************/
+static uint32 spoolss_size_printer_info_2(PRINTER_INFO_2 *info)
+{
+ int size=0;
+
+ size+=4; /* the security descriptor */
+ size+=0xDC+4; /* size of the devmode and the ptr */
+
+ size+=size_of_relative_string( &(info->servername) );
+ size+=size_of_relative_string( &(info->printername) );
+ size+=size_of_relative_string( &(info->sharename) );
+ size+=size_of_relative_string( &(info->portname) );
+ size+=size_of_relative_string( &(info->drivername) );
+ size+=size_of_relative_string( &(info->comment) );
+ size+=size_of_relative_string( &(info->location) );
+
+ size+=size_of_relative_string( &(info->sepfile) );
+ size+=size_of_relative_string( &(info->printprocessor) );
+ size+=size_of_relative_string( &(info->datatype) );
+ size+=size_of_relative_string( &(info->parameters) );
+
+ size+=size_of_uint32( &(info->attributes) );
+ size+=size_of_uint32( &(info->priority) );
+ size+=size_of_uint32( &(info->defaultpriority) );
+ size+=size_of_uint32( &(info->starttime) );
+ size+=size_of_uint32( &(info->untiltime) );
+ size+=size_of_uint32( &(info->status) );
+ size+=size_of_uint32( &(info->cjobs) );
+ size+=size_of_uint32( &(info->averageppm) );
+ return (size);
+}
+
+/*******************************************************************
+return the size required by a struct in the stream
+********************************************************************/
+static uint32 spoolss_size_printer_driver_info_1(DRIVER_INFO_1 *info)
+{
+ int size=0;
+ DEBUG(9,("Sizing driver info_1\n"));
+ size+=size_of_relative_string( &(info->name) );
+
+ DEBUGADD(9,("size: [%d]\n", size));
+ return (size);
+}
+
+/*******************************************************************
+return the size required by a struct in the stream
+********************************************************************/
+static uint32 spoolss_size_printer_driver_info_2(DRIVER_INFO_2 *info)
+{
+ int size=0;
+ DEBUG(9,("Sizing driver info_2\n"));
+ size+=size_of_uint32( &(info->version) );
+ size+=size_of_relative_string( &(info->name) );
+ size+=size_of_relative_string( &(info->architecture) );
+ size+=size_of_relative_string( &(info->driverpath) );
+ size+=size_of_relative_string( &(info->datafile) );
+ size+=size_of_relative_string( &(info->configfile) );
+
+ DEBUGADD(9,("size: [%d]\n", size));
+ return (size);
+}
+
+/*******************************************************************
+return the size required by a struct in the stream
+********************************************************************/
+static uint32 spoolss_size_printer_driver_info_3(DRIVER_INFO_3 *info)
+{
+ int size=0;
+ DEBUG(9,("Sizing driver info_3\n"));
+ size+=size_of_uint32( &(info->version) );
+ size+=size_of_relative_string( &(info->name) );
+ size+=size_of_relative_string( &(info->architecture) );
+ size+=size_of_relative_string( &(info->driverpath) );
+ size+=size_of_relative_string( &(info->datafile) );
+ size+=size_of_relative_string( &(info->configfile) );
+ size+=size_of_relative_string( &(info->helpfile) );
+ size+=size_of_relative_string( &(info->dependentfiles) );
+ size+=size_of_relative_string( &(info->monitorname) );
+ size+=size_of_relative_string( &(info->defaultdatatype) );
+
+ DEBUGADD(9,("size: [%d]\n", size));
+ return (size);
+}
+
+/*******************************************************************
+return the size required by a struct in the stream
+********************************************************************/
+static uint32 spoolss_size_job_info_1(JOB_INFO_1 *info)
+{
+ int size=0;
+ size+=size_of_uint32( &(info->jobid) );
+ size+=size_of_relative_string( &(info->printername) );
+ size+=size_of_relative_string( &(info->machinename) );
+ size+=size_of_relative_string( &(info->username) );
+ size+=size_of_relative_string( &(info->document) );
+ size+=size_of_relative_string( &(info->datatype) );
+ size+=size_of_relative_string( &(info->text_status) );
+ size+=size_of_uint32( &(info->status) );
+ size+=size_of_uint32( &(info->priority) );
+ size+=size_of_uint32( &(info->position) );
+ size+=size_of_uint32( &(info->totalpages) );
+ size+=size_of_uint32( &(info->pagesprinted) );
+ size+=size_of_systemtime( &(info->submitted) );
+ return (size);
+}
+
+/*******************************************************************
+return the size required by a struct in the stream
+********************************************************************/
+static uint32 spoolss_size_job_info_2(JOB_INFO_2 *info)
+{
+ int size=0;
+
+ size+=4; /* size of sec desc ptr */
+
+ size+=size_of_uint32( &(info->jobid) );
+ size+=size_of_relative_string( &(info->printername) );
+ size+=size_of_relative_string( &(info->machinename) );
+ size+=size_of_relative_string( &(info->username) );
+ size+=size_of_relative_string( &(info->document) );
+ size+=size_of_relative_string( &(info->notifyname) );
+ size+=size_of_relative_string( &(info->datatype) );
+ size+=size_of_relative_string( &(info->printprocessor) );
+ size+=size_of_relative_string( &(info->parameters) );
+ size+=size_of_relative_string( &(info->drivername) );
+ size+=size_of_device_mode( &(info->devmode) );
+ size+=size_of_relative_string( &(info->text_status) );
+/* SEC_DESC sec_desc;*/
+ size+=size_of_uint32( &(info->status) );
+ size+=size_of_uint32( &(info->priority) );
+ size+=size_of_uint32( &(info->position) );
+ size+=size_of_uint32( &(info->starttime) );
+ size+=size_of_uint32( &(info->untiltime) );
+ size+=size_of_uint32( &(info->totalpages) );
+ size+=size_of_uint32( &(info->size) );
+ size+=size_of_systemtime( &(info->submitted) );
+ size+=size_of_uint32( &(info->timeelapsed) );
+ size+=size_of_uint32( &(info->pagesprinted) );
+ return (size);
+}
+
+/*******************************************************************
+return the size required by a struct in the stream
+********************************************************************/
+static uint32 spoolss_size_form_1(FORM_1 *info)
+{
+ int size=0;
+
+ size+=size_of_uint32( &(info->flag) );
+ size+=size_of_relative_string( &(info->name) );
+ size+=size_of_uint32( &(info->width) );
+ size+=size_of_uint32( &(info->length) );
+ size+=size_of_uint32( &(info->left) );
+ size+=size_of_uint32( &(info->top) );
+ size+=size_of_uint32( &(info->right) );
+ size+=size_of_uint32( &(info->bottom) );
+
+ return (size);
+}
+
+/*******************************************************************
+return the size required by a struct in the stream
+********************************************************************/
+static uint32 spoolss_size_port_info_2(PORT_INFO_2 *info)
+{
+ int size=0;
+
+ size+=size_of_relative_string( &(info->port_name) );
+ size+=size_of_relative_string( &(info->monitor_name) );
+ size+=size_of_relative_string( &(info->description) );
+
+ size+=size_of_uint32( &(info->port_type) );
+ size+=size_of_uint32( &(info->reserved) );
+
+ return (size);
+}
+
+/*******************************************************************
+ * read a uint8 buffer of size *size.
+ * allocate memory for it
+ * return a pointer to the allocated memory and the size
+ * return NULL and a size of 0 if the buffer is empty
+ *
+ * jfmxxxx: fix it to also write a buffer
+ ********************************************************************/
+static void spoolss_io_read_buffer(char *desc, prs_struct *ps, int depth, BUFFER *buffer)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_read_buffer");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("pointer", ps, depth, &(buffer->ptr));
+
+ if (buffer->ptr != 0x0000)
+ {
+ prs_uint32("size", ps, depth, &(buffer->size));
+ buffer->data=(uint8 *)malloc( (buffer->size) * sizeof(uint8) );
+ prs_uint8s(True,"buffer", ps, depth, buffer->data, buffer->size);
+ prs_align(ps);
+
+ }
+ else
+ {
+ buffer->data=0x0000;
+ buffer->size=0x0000;
+ }
+}
+
+
+/*******************************************************************
+ * read a structure.
+ * called from spoolss_getprinterdriver2 (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_q_getprinterdriver2(char *desc,
+ SPOOL_Q_GETPRINTERDRIVER2 *q_u,
+ prs_struct *ps, int depth)
+{
+ uint32 useless_ptr;
+ prs_debug(ps, depth, desc, "spoolss_io_q_getprinterdriver2");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+ smb_io_unistr2("architecture", &(q_u->architecture),True,ps,depth);
+
+ prs_align(ps);
+
+ prs_uint32("level", ps, depth, &(q_u->level));
+ spoolss_io_read_buffer("", ps, depth, &(q_u->buffer));
+
+ prs_align(ps);
+
+ prs_uint32("buffer size", ps, depth, &(q_u->buf_size));
+ prs_uint32("status", ps, depth, &(q_u->status));
+
+}
+
+/*******************************************************************
+ * read a structure.
+ * called from spoolss_getprinterdriver2 (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_r_getprinterdriver2(char *desc, SPOOL_R_GETPRINTERDRIVER2 *r_u,
+ prs_struct *ps, int depth)
+{
+ uint32 useless_ptr=0xADDE0FF0;
+ uint32 start_offset, end_offset, beginning;
+ uint32 bufsize_required=0;
+ uint32 pipo=0;
+ DRIVER_INFO_1 *info1;
+ DRIVER_INFO_2 *info2;
+ DRIVER_INFO_3 *info3;
+
+ prs_debug(ps, depth, desc, "spoolss_io_r_getprinterdriver2");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+
+ info1 = r_u->printer.info1;
+ info2 = r_u->printer.info2;
+ info3 = r_u->printer.info3;
+
+ switch (r_u->level)
+ {
+ case 1:
+ {
+ bufsize_required += spoolss_size_printer_driver_info_1(info1);
+ break;
+ }
+ case 2:
+ {
+ bufsize_required += spoolss_size_printer_driver_info_2(info2);
+ break;
+ }
+ case 3:
+ {
+ bufsize_required += spoolss_size_printer_driver_info_3(info3);
+ break;
+ }
+ }
+
+ DEBUG(4,("spoolss_io_r_getprinterdriver2, size needed: %d\n",bufsize_required));
+ DEBUG(4,("spoolss_io_r_getprinterdriver2, size offered: %d\n",r_u->offered));
+
+ /* check if the buffer is big enough for the datas */
+ if (r_u->offered<bufsize_required)
+ {
+ /* it's too small */
+ r_u->status=ERROR_INSUFFICIENT_BUFFER; /* say so */
+ r_u->offered=0; /* don't send back the buffer */
+
+ DEBUG(4,("spoolss_io_r_getprinterdriver2, buffer too small\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+ }
+ else
+ {
+ mem_grow_data(&(ps->data), ps->io, r_u->offered, 0);
+
+ DEBUG(4,("spoolss_io_r_getprinterdriver2, buffer large enough\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+
+ beginning=ps->offset;
+ start_offset=ps->offset;
+ end_offset=start_offset+r_u->offered;
+
+ switch (r_u->level)
+ {
+ case 1:
+ {
+ smb_io_printer_driver_info_1(desc,
+ info1,
+ ps,
+ depth,
+ &start_offset,
+ &end_offset);
+ break;
+ }
+ case 2:
+ {
+ smb_io_printer_driver_info_2(desc,
+ info2,
+ ps,
+ depth,
+ &start_offset,
+ &end_offset);
+ break;
+ }
+ case 3:
+ {
+ smb_io_printer_driver_info_3(desc,
+ info3,
+ ps,
+ depth,
+ &start_offset,
+ &end_offset);
+ break;
+ }
+
+ }
+
+ ps->offset=beginning+r_u->offered;
+ prs_align(ps);
+ }
+
+ /*
+ * if the buffer was too small, send the minimum required size
+ * if it was too large, send the real needed size
+ */
+
+ prs_uint32("size of buffer needed", ps, depth, &(bufsize_required));
+ prs_uint32("pipo", ps, depth, &pipo);
+ prs_uint32("pipo", ps, depth, &pipo);
+ prs_uint32("status", ps, depth, &(r_u->status));
+
+}
+
+/*******************************************************************
+ * read a structure.
+ * called from spoolss_enumprinters (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_q_enumprinters(char *desc, SPOOL_Q_ENUMPRINTERS *q_u,
+ prs_struct *ps, int depth)
+{
+ uint32 useless_ptr;
+ prs_debug(ps, depth, desc, "spoolss_io_q_enumprinters");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("flags", ps, depth, &(q_u->flags));
+
+ prs_uint32("useless ptr", ps, depth, &useless_ptr);
+
+ smb_io_unistr2("", &(q_u->servername),True,ps,depth);
+
+ prs_align(ps);
+
+ prs_uint32("level", ps, depth, &(q_u->level));
+
+ spoolss_io_read_buffer("buffer", ps, depth, &(q_u->buffer));
+}
+
+/*******************************************************************
+ * write a structure.
+ * called from spoolss_r_enum_printers (srv_spoolss.c)
+ *
+ ********************************************************************/
+void spoolss_io_r_enumprinters(char *desc,
+ SPOOL_R_ENUMPRINTERS *r_u,
+ prs_struct *ps, int depth)
+{
+ uint32 useless_ptr=0xADDE0FF0;
+ int i;
+ uint32 start_offset, end_offset, beginning;
+ uint32 bufsize_required=0;
+
+ PRINTER_INFO_1 *info1;
+ PRINTER_INFO_2 *info2;
+
+ prs_debug(ps, depth, desc, "spoolss_io_r_enumprinters");
+ depth++;
+ prs_align(ps);
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+
+ for(i=0;i<r_u->returned;i++)
+ {
+ switch (r_u->level)
+ {
+ case 1:
+ info1 = r_u->printer.printers_1[i];
+ bufsize_required += spoolss_size_printer_info_1(info1);
+ break;
+ case 2:
+ info2 = r_u->printer.printers_2[i];
+ bufsize_required += spoolss_size_printer_info_2(info2);
+ break;
+ }
+ }
+
+ DEBUG(4,("spoolss_io_r_enumprinters, size needed: %d\n",bufsize_required));
+ DEBUG(4,("spoolss_io_r_enumprinters, size offered: %d\n",r_u->offered));
+
+ if (r_u->offered<bufsize_required)
+ {
+ /*
+ * so the buffer is too small to handle datas
+ * reply the minimum size required in the status
+ * make the buffer equal 0
+ * and reply no printers in buffer
+ */
+ r_u->status=ERROR_INSUFFICIENT_BUFFER;
+ r_u->offered=0;
+ /*r_u->returned=0;*/
+
+ DEBUG(4,("spoolss_io_r_enumprinters, buffer too small\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+ prs_uint32("size of buffer needed", ps, depth, &(bufsize_required));
+ prs_uint32("count", ps, depth, &(r_u->returned));
+ prs_uint32("status", ps, depth, &(r_u->status));
+ return;
+ }
+
+ mem_grow_data(&(ps->data), ps->io, r_u->offered, 0);
+
+ DEBUG(4,("spoolss_io_r_enumprinters, buffer large enough\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+
+ beginning=ps->offset;
+ start_offset=ps->offset;
+ end_offset=start_offset+r_u->offered;
+
+ for(i=0;i<r_u->returned;i++)
+ {
+ switch (r_u->level)
+ {
+ case 1:
+ info1=r_u->printer.printers_1[i];
+ smb_io_printer_info_1(desc, info1, ps, depth,
+ &start_offset, &end_offset);
+ break;
+ case 2:
+ info2=r_u->printer.printers_2[i];
+ smb_io_printer_info_2(desc, info2, ps, depth,
+ &start_offset, &end_offset);
+ break;
+ }
+ }
+
+ ps->offset=beginning+r_u->offered;
+ prs_align(ps);
+
+ prs_uint32("size of buffer needed", ps, depth, &(bufsize_required));
+ prs_uint32("count", ps, depth, &(r_u->returned));
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+ * write a structure.
+ * called from spoolss_r_enum_printers (srv_spoolss.c)
+ *
+ ********************************************************************/
+void spoolss_io_r_getprinter(char *desc,
+ SPOOL_R_GETPRINTER *r_u,
+ prs_struct *ps, int depth)
+{
+ uint32 useless_ptr=0xADDE0FF0;
+ uint32 start_offset, end_offset, beginning;
+ uint32 bufsize_required=0;
+
+ prs_debug(ps, depth, desc, "spoolss_io_r_getprinter");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+
+ switch (r_u->level)
+ {
+ case 0:
+ {
+ PRINTER_INFO_0 *info;
+ info = r_u->printer.info0;
+ bufsize_required += spoolss_size_printer_info_0(info);
+ break;
+ }
+ case 1:
+ {
+ PRINTER_INFO_1 *info;
+ info = r_u->printer.info1;
+ bufsize_required += spoolss_size_printer_info_1(info);
+ break;
+ }
+ case 2:
+ {
+ PRINTER_INFO_2 *info;
+ info = r_u->printer.info2;
+ bufsize_required += spoolss_size_printer_info_2(info);
+ break;
+ }
+ }
+
+ DEBUG(4,("spoolss_io_r_getprinter, size needed: %d\n",bufsize_required));
+ DEBUG(4,("spoolss_io_r_getprinter, size offered: %d\n",r_u->offered));
+
+ /* check if the buffer is big enough for the datas */
+ if (r_u->offered<bufsize_required)
+ {
+ /* it's too small */
+ r_u->status=ERROR_INSUFFICIENT_BUFFER; /* say so */
+ r_u->offered=0; /* don't send back the buffer */
+
+ DEBUG(4,("spoolss_io_r_getprinter, buffer too small\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+ }
+ else
+ {
+ mem_grow_data(&(ps->data), ps->io, r_u->offered, 0);
+
+ DEBUG(4,("spoolss_io_r_getprinter, buffer large enough\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+ beginning=ps->offset;
+ start_offset=ps->offset;
+ end_offset=start_offset+r_u->offered;
+
+ switch (r_u->level)
+ {
+ case 0:
+ {
+ PRINTER_INFO_0 *info;
+ info = r_u->printer.info0;
+ smb_io_printer_info_0(desc,
+ info,
+ ps,
+ depth,
+ &start_offset,
+ &end_offset);
+ break;
+ }
+ case 1:
+ {
+ PRINTER_INFO_1 *info;
+ info = r_u->printer.info1;
+ smb_io_printer_info_1(desc,
+ info,
+ ps,
+ depth,
+ &start_offset,
+ &end_offset);
+ break;
+ }
+ case 2:
+ {
+ PRINTER_INFO_2 *info;
+ info = r_u->printer.info2;
+ smb_io_printer_info_2(desc,
+ info,
+ ps,
+ depth,
+ &start_offset,
+ &end_offset);
+ break;
+ }
+
+ }
+
+ ps->offset=beginning+r_u->offered;
+ prs_align(ps);
+ }
+
+ /*
+ * if the buffer was too small, send the minimum required size
+ * if it was too large, send the real needed size
+ */
+
+ prs_uint32("size of buffer needed", ps, depth, &(bufsize_required));
+ prs_uint32("status", ps, depth, &(r_u->status));
+
+}
+
+/*******************************************************************
+ * read a uint8 buffer of size *size.
+ * allocate memory for it
+ * return a pointer to the allocated memory and the size
+ * return NULL and a size of 0 if the buffer is empty
+ *
+ * jfmxxxx: fix it to also write a buffer
+ ********************************************************************/
+static void spoolss_io_read_buffer8(char *desc, prs_struct *ps, uint8 **buffer, uint32 *size,int depth)
+{
+ uint32 useless_ptr;
+
+ prs_debug(ps, depth, desc, "spoolss_io_read_buffer8");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("buffer pointer", ps, depth, &useless_ptr);
+
+ if (useless_ptr != 0x0000)
+ {
+ prs_uint32("buffer size", ps, depth, size);
+ *buffer=(uint8 *)malloc( (*size) * sizeof(uint8) );
+ prs_uint8s(True,"buffer",ps,depth,*buffer,*size);
+ prs_align(ps);
+ }
+ else
+ {
+ *buffer=0x0000;
+ *size=0x0000;
+ }
+}
+
+/*******************************************************************
+ * read a structure.
+ * called from spoolss_getprinter (srv_spoolss.c)
+ ********************************************************************/
+void spoolss_io_q_getprinter(char *desc, SPOOL_Q_GETPRINTER *q_u,
+ prs_struct *ps, int depth)
+{
+ uint32 count;
+ uint8 *buffer;
+ prs_debug(ps, depth, desc, "spoolss_io_q_getprinter");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+
+ prs_uint32("level", ps, depth, &(q_u->level));
+
+ spoolss_io_read_buffer8("",ps, &buffer, &count,depth);
+ if (buffer != 0x0000)
+ {
+ free(buffer);
+ }
+
+ prs_uint32("buffer size", ps, depth, &(q_u->offered));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_r_setprinter(char *desc, SPOOL_R_SETPRINTER *r_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_r_setprinter");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+********************************************************************/
+static void spoolss_io_devmode(char *desc, prs_struct *ps, int depth, DEVICEMODE **devmode)
+{
+ uint32 devmode_size=0x0;
+ uint32 useless_ptr=0x0;
+
+ prs_debug(ps, depth, desc, "spoolss_io_devmode");
+ depth++;
+
+ prs_uint32("devmode_size", ps, depth, &(devmode_size));
+ prs_uint32("useless_ptr", ps, depth, &(useless_ptr));
+
+ if (devmode_size!=0 && useless_ptr!=0)
+ {
+ /* so we have a DEVICEMODE to follow */
+ if (ps->io)
+ {
+ DEBUG(9,("Allocating memory for spoolss_io_devmode\n"));
+ *devmode=(DEVICEMODE *)malloc(sizeof(DEVICEMODE));
+ ZERO_STRUCTP(*devmode);
+ }
+
+ /* this is bad code, shouldn't be there */
+ prs_uint32("devmode_size", ps, depth, &(devmode_size));
+
+ smb_io_devmode(desc, ps, depth, *devmode);
+ }
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_q_setprinter(char *desc, SPOOL_Q_SETPRINTER *q_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_q_setprinter");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle", &(q_u->handle),ps,depth);
+ prs_uint32("level", ps, depth, &(q_u->level));
+
+ /* again a designed mess */
+ /* sometimes I'm wondering how all of this work ! */
+
+ /* To be correct it need to be split in 3 functions */
+
+ spool_io_printer_info_level("", &(q_u->info), ps, depth);
+
+ spoolss_io_devmode(desc, ps, depth, &(q_u->devmode));
+
+ prs_uint32("security.size_of_buffer", ps, depth, &(q_u->security.size_of_buffer));
+ prs_uint32("security.data", ps, depth, &(q_u->security.data));
+
+ prs_uint32("command", ps, depth, &(q_u->command));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_r_fcpn(char *desc, SPOOL_R_FCPN *r_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_r_fcpn");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_q_fcpn(char *desc, SPOOL_Q_FCPN *q_u, prs_struct *ps, int depth)
+{
+
+ prs_debug(ps, depth, desc, "spoolss_io_q_fcpn");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+}
+
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_r_addjob(char *desc, SPOOL_R_ADDJOB *r_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_q_addjob(char *desc, SPOOL_Q_ADDJOB *q_u, prs_struct *ps, int depth)
+{
+
+ prs_debug(ps, depth, desc, "");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+ prs_uint32("level", ps, depth, &(q_u->level));
+
+ spoolss_io_read_buffer("", ps, depth, &(q_u->buffer));
+
+ prs_align(ps);
+
+ prs_uint32("buf_size", ps, depth, &(q_u->buf_size));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_r_enumjobs(char *desc, SPOOL_R_ENUMJOBS *r_u, prs_struct *ps, int depth)
+{
+ uint32 useless_ptr=0xADDE0FF0;
+ uint32 start_offset, end_offset, beginning;
+ uint32 bufsize_required=0;
+ int i;
+
+ prs_debug(ps, depth, desc, "spoolss_io_r_enumjobs");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+
+ switch (r_u->level)
+ {
+ case 1:
+ {
+ JOB_INFO_1 *info;
+ info=r_u->job.job_info_1;
+
+ for (i=0; i<r_u->numofjobs; i++)
+ {
+ bufsize_required += spoolss_size_job_info_1(&(info[i]));
+ }
+ break;
+ }
+ case 2:
+ {
+ JOB_INFO_2 *info;
+ info=r_u->job.job_info_2;
+
+ for (i=0; i<r_u->numofjobs; i++)
+ {
+ bufsize_required += spoolss_size_job_info_2(&(info[i]));
+ }
+ break;
+ }
+ }
+
+ DEBUG(4,("spoolss_io_r_enumjobs, size needed: %d\n",bufsize_required));
+ DEBUG(4,("spoolss_io_r_enumjobs, size offered: %d\n",r_u->offered));
+
+ /* check if the buffer is big enough for the datas */
+ if (r_u->offered<bufsize_required)
+ {
+ /* it's too small */
+ r_u->status=ERROR_INSUFFICIENT_BUFFER; /* say so */
+ r_u->offered=0; /* don't send back the buffer */
+
+ DEBUG(4,("spoolss_io_r_enumjobs, buffer too small\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+ }
+ else
+ {
+ mem_grow_data(&(ps->data), ps->io, r_u->offered, 0);
+
+ DEBUG(4,("spoolss_io_r_enumjobs, buffer large enough\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+ beginning=ps->offset;
+ start_offset=ps->offset;
+ end_offset=start_offset+r_u->offered;
+
+ switch (r_u->level)
+ {
+ case 1:
+ {
+ JOB_INFO_1 *info;
+ for (i=0; i<r_u->numofjobs; i++)
+ {
+ info = &(r_u->job.job_info_1[i]);
+ smb_io_job_info_1(desc,
+ info,
+ ps,
+ depth,
+ &start_offset,
+ &end_offset);
+ }
+ break;
+ }
+ case 2:
+ {
+ JOB_INFO_2 *info;
+ for (i=0; i<r_u->numofjobs; i++)
+ {
+ info = &(r_u->job.job_info_2[i]);
+ smb_io_job_info_2(desc,
+ info,
+ ps,
+ depth,
+ &start_offset,
+ &end_offset);
+ }
+ break;
+ }
+
+ }
+ ps->offset=beginning+r_u->offered;
+ prs_align(ps);
+ }
+
+ /*
+ * if the buffer was too small, send the minimum required size
+ * if it was too large, send the real needed size
+ */
+
+ prs_uint32("size of buffer needed", ps, depth, &(bufsize_required));
+ prs_uint32("numofjobs", ps, depth, &(r_u->numofjobs));
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_q_enumjobs(char *desc, SPOOL_Q_ENUMJOBS *q_u, prs_struct *ps, int depth)
+{
+
+ prs_debug(ps, depth, desc, "");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+ prs_uint32("firstjob", ps, depth, &(q_u->firstjob));
+ prs_uint32("numofjobs", ps, depth, &(q_u->numofjobs));
+ prs_uint32("level", ps, depth, &(q_u->level));
+
+ spoolss_io_read_buffer("", ps, depth, &(q_u->buffer));
+
+ prs_align(ps);
+
+ prs_uint32("buf_size", ps, depth, &(q_u->buf_size));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_r_schedulejob(char *desc, SPOOL_R_SCHEDULEJOB *r_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_r_schedulejob");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_q_schedulejob(char *desc, SPOOL_Q_SCHEDULEJOB *q_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_q_schedulejob");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+ prs_uint32("jobid", ps, depth, &(q_u->jobid));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_r_setjob(char *desc, SPOOL_R_SETJOB *r_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_r_setjob");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_q_setjob(char *desc, SPOOL_Q_SETJOB *q_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_q_setjob");
+ depth++;
+
+ prs_align(ps);
+
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+ prs_uint32("jobid", ps, depth, &(q_u->jobid));
+ /*
+ * level is usually 0. If (level!=0) then I'm in trouble !
+ * I will try to generate setjob command with level!=0, one day.
+ */
+ prs_uint32("level", ps, depth, &(q_u->level));
+ prs_uint32("command", ps, depth, &(q_u->command));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_r_enumdrivers(char *desc, SPOOL_R_ENUMPRINTERDRIVERS *r_u, prs_struct *ps, int depth)
+{
+ uint32 useless_ptr=0xADDE0FF0;
+ uint32 start_offset, end_offset, beginning;
+ uint32 bufsize_required=0;
+ int i;
+
+ prs_debug(ps, depth, desc, "spoolss_io_r_enumdrivers");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+
+ DEBUG(7,("Level [%d], number [%d]\n", r_u->level, r_u->numofdrivers));
+ switch (r_u->level)
+ {
+ case 1:
+ {
+ DRIVER_INFO_1 *driver_info_1;
+ driver_info_1=r_u->driver.driver_info_1;
+
+ for (i=0; i<r_u->numofdrivers; i++)
+ {
+ bufsize_required += spoolss_size_printer_driver_info_1(&(driver_info_1[i]));
+ }
+ break;
+ }
+ case 2:
+ {
+ DRIVER_INFO_2 *driver_info_2;
+ driver_info_2=r_u->driver.driver_info_2;
+
+ for (i=0; i<r_u->numofdrivers; i++)
+ {
+ bufsize_required += spoolss_size_printer_driver_info_2(&(driver_info_2[2]));
+ }
+ break;
+ }
+ case 3:
+ {
+ DRIVER_INFO_3 *driver_info_3;
+ driver_info_3=r_u->driver.driver_info_3;
+
+ for (i=0; i<r_u->numofdrivers; i++)
+ {
+ bufsize_required += spoolss_size_printer_driver_info_3(&(driver_info_3[i]));
+ }
+ break;
+ }
+ }
+
+ DEBUGADD(7,("size needed: %d\n",bufsize_required));
+ DEBUGADD(7,("size offered: %d\n",r_u->offered));
+
+ /* check if the buffer is big enough for the datas */
+
+ if (r_u->offered<bufsize_required)
+ {
+
+ /* it's too small */
+ r_u->status=ERROR_INSUFFICIENT_BUFFER; /* say so */
+ r_u->offered=0; /* don't send back the buffer */
+ DEBUGADD(8,("buffer too small\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+ }
+ else
+ {
+ mem_grow_data(&(ps->data), ps->io, r_u->offered, 0);
+
+ DEBUGADD(8,("buffer large enough\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+ beginning=ps->offset;
+ start_offset=ps->offset;
+ end_offset=start_offset+r_u->offered;
+
+ switch (r_u->level)
+ {
+ case 1:
+ {
+ DRIVER_INFO_1 *info;
+ for (i=0; i<r_u->numofdrivers; i++)
+ {
+ info = &(r_u->driver.driver_info_1[i]);
+ smb_io_printer_driver_info_1(desc, info, ps, depth, &start_offset, &end_offset);
+ }
+ break;
+ }
+ case 2:
+ {
+ DRIVER_INFO_2 *info;
+ for (i=0; i<r_u->numofdrivers; i++)
+ {
+ info = &(r_u->driver.driver_info_2[i]);
+ smb_io_printer_driver_info_2(desc, info, ps, depth, &start_offset, &end_offset);
+ }
+ break;
+ }
+ case 3:
+ {
+ DRIVER_INFO_3 *info;
+ for (i=0; i<r_u->numofdrivers; i++)
+ {
+ info = &(r_u->driver.driver_info_3[i]);
+ smb_io_printer_driver_info_3(desc, info, ps, depth, &start_offset, &end_offset);
+ }
+ break;
+ }
+ }
+ ps->offset=beginning+r_u->offered;
+ prs_align(ps);
+ }
+
+ /*
+ * if the buffer was too small, send the minimum required size
+ * if it was too large, send the real needed size
+ */
+
+ prs_uint32("size of buffer needed", ps, depth, &(bufsize_required));
+ prs_uint32("numofdrivers", ps, depth, &(r_u->numofdrivers));
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_q_enumprinterdrivers(char *desc, SPOOL_Q_ENUMPRINTERDRIVERS *q_u, prs_struct *ps, int depth)
+{
+
+ uint32 useless_ptr=0xADDE0FF0;
+ prs_debug(ps, depth, desc, "");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+ smb_io_unistr2("", &(q_u->name),True,ps,depth);
+ prs_align(ps);
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+ smb_io_unistr2("", &(q_u->environment),True,ps,depth);
+ prs_align(ps);
+ prs_uint32("level", ps, depth, &(q_u->level));
+ spoolss_io_read_buffer("", ps, depth, &(q_u->buffer));
+ prs_align(ps);
+ prs_uint32("buf_size", ps, depth, &(q_u->buf_size));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_r_enumforms(char *desc, SPOOL_R_ENUMFORMS *r_u, prs_struct *ps, int depth)
+{
+ uint32 useless_ptr=0xADDE0FF0;
+ uint32 start_offset, end_offset, beginning;
+ uint32 bufsize_required=0;
+ int i;
+
+ prs_debug(ps, depth, desc, "spoolss_io_r_enumforms");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+ switch (r_u->level)
+ {
+ case 1:
+ {
+ FORM_1 *forms_1;
+ forms_1=r_u->forms_1;
+
+ for (i=0; i<r_u->numofforms; i++)
+ {
+ bufsize_required += spoolss_size_form_1(&(forms_1[i]));
+ }
+ break;
+ }
+ }
+
+ DEBUG(4,("spoolss_io_r_enumforms, size needed: %d\n",bufsize_required));
+ DEBUG(4,("spoolss_io_r_enumforms, size offered: %d\n",r_u->offered));
+
+ /* check if the buffer is big enough for the datas */
+
+ if (r_u->offered<bufsize_required)
+ {
+
+ /* it's too small */
+ r_u->status=ERROR_INSUFFICIENT_BUFFER; /* say so */
+ r_u->offered=0; /* don't send back the buffer */
+
+ DEBUG(4,("spoolss_io_r_enumforms, buffer too small\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+ }
+ else
+ {
+ mem_grow_data(&(ps->data), ps->io, r_u->offered, 0);
+
+ DEBUG(4,("spoolss_io_r_enumforms, buffer large enough\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+
+ if (r_u->offered!=0)
+ {
+ beginning=ps->offset;
+ start_offset=ps->offset;
+ end_offset=start_offset+r_u->offered;
+
+ switch (r_u->level)
+ {
+ case 1:
+ {
+ FORM_1 *info;
+ for (i=0; i<r_u->numofforms; i++)
+ {
+ info = &(r_u->forms_1[i]);
+ smb_io_form_1(desc, info, ps, depth, &start_offset, &end_offset);
+ }
+ break;
+ }
+ }
+ ps->offset=beginning+r_u->offered;
+ prs_align(ps);
+ }
+ }
+
+ /*
+ * if the buffer was too small, send the minimum required size
+ * if it was too large, send the real needed size
+ */
+
+ prs_uint32("size of buffer needed", ps, depth, &(bufsize_required));
+ prs_uint32("numofforms", ps, depth, &(r_u->numofforms));
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_q_enumforms(char *desc, SPOOL_Q_ENUMFORMS *q_u, prs_struct *ps, int depth)
+{
+
+ prs_debug(ps, depth, desc, "");
+ depth++;
+
+ prs_align(ps);
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+ prs_uint32("level", ps, depth, &(q_u->level));
+ spoolss_io_read_buffer("", ps, depth, &(q_u->buffer));
+ prs_align(ps);
+ prs_uint32("buf_size", ps, depth, &(q_u->buf_size));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_r_enumports(char *desc, SPOOL_R_ENUMPORTS *r_u, prs_struct *ps, int depth)
+{
+ uint32 useless_ptr=0xADDE0FF0;
+ uint32 start_offset, end_offset, beginning;
+ uint32 bufsize_required=0;
+ int i;
+
+ prs_debug(ps, depth, desc, "spoolss_io_r_enumports");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+ switch (r_u->level)
+ {
+ case 2:
+ {
+ PORT_INFO_2 *port_2;
+ port_2=r_u->port.port_info_2;
+
+ for (i=0; i<r_u->numofports; i++)
+ {
+ bufsize_required += spoolss_size_port_info_2(&(port_2[i]));
+ }
+ break;
+ }
+ }
+
+ DEBUG(4,("size needed: %d\n",bufsize_required));
+ DEBUG(4,("size offered: %d\n",r_u->offered));
+
+ /* check if the buffer is big enough for the datas */
+ if (r_u->offered<bufsize_required)
+ {
+
+ /* it's too small */
+ r_u->status=ERROR_INSUFFICIENT_BUFFER; /* say so */
+ r_u->offered=0; /* don't send back the buffer */
+
+ DEBUG(4,("buffer too small\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+ }
+ else
+ {
+ mem_grow_data(&(ps->data), ps->io, r_u->offered, 0);
+
+ DEBUG(4,("buffer large enough\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+ beginning=ps->offset;
+ start_offset=ps->offset;
+ end_offset=start_offset+r_u->offered;
+
+ switch (r_u->level)
+ {
+ case 2:
+ {
+ PORT_INFO_2 *info;
+ for (i=0; i<r_u->numofports; i++)
+ {
+ info = &(r_u->port.port_info_2[i]);
+ smb_io_port_2(desc, info, ps, depth, &start_offset, &end_offset);
+ }
+ break;
+ }
+ }
+ ps->offset=beginning+r_u->offered;
+ prs_align(ps);
+ }
+
+ /*
+ * if the buffer was too small, send the minimum required size
+ * if it was too large, send the real needed size
+ */
+
+ prs_uint32("size of buffer needed", ps, depth, &(bufsize_required));
+ prs_uint32("numofports", ps, depth, &(r_u->numofports));
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_q_enumports(char *desc, SPOOL_Q_ENUMPORTS *q_u, prs_struct *ps, int depth)
+{
+ uint32 useless;
+ prs_debug(ps, depth, desc, "");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("useless", ps, depth, &useless);
+ smb_io_unistr2("", &(q_u->name),True,ps,depth);
+ prs_align(ps);
+ prs_uint32("level", ps, depth, &(q_u->level));
+ spoolss_io_read_buffer("", ps, depth, &(q_u->buffer));
+ prs_align(ps);
+ prs_uint32("buf_size", ps, depth, &(q_u->buf_size));
+}
+
+
+/*******************************************************************
+********************************************************************/
+void spool_io_printer_info_level_2(char *desc, SPOOL_PRINTER_INFO_LEVEL_2 **q_u, prs_struct *ps, int depth)
+{
+ SPOOL_PRINTER_INFO_LEVEL_2 *il;
+
+ prs_debug(ps, depth, desc, "");
+ depth++;
+
+ /* reading */
+ if (ps->io)
+ {
+ il=(SPOOL_PRINTER_INFO_LEVEL_2 *)malloc(sizeof(SPOOL_PRINTER_INFO_LEVEL_2));
+ ZERO_STRUCTP(il);
+ *q_u=il;
+ DEBUG(7,("lecture: memoire ok\n"));
+ }
+ else
+ {
+ il=*q_u;
+ }
+
+ prs_align(ps);
+
+ prs_uint32("servername_ptr", ps, depth, &(il->servername_ptr));
+ prs_uint32("printername_ptr", ps, depth, &(il->printername_ptr));
+ prs_uint32("sharename_ptr", ps, depth, &(il->sharename_ptr));
+ prs_uint32("portname_ptr", ps, depth, &(il->portname_ptr));
+ prs_uint32("drivername_ptr", ps, depth, &(il->drivername_ptr));
+ prs_uint32("comment_ptr", ps, depth, &(il->comment_ptr));
+ prs_uint32("location_ptr", ps, depth, &(il->location_ptr));
+ prs_uint32("devmode_ptr", ps, depth, &(il->devmode_ptr));
+ prs_uint32("sepfile_ptr", ps, depth, &(il->sepfile_ptr));
+ prs_uint32("printprocessor_ptr", ps, depth, &(il->printprocessor_ptr));
+ prs_uint32("datatype_ptr", ps, depth, &(il->datatype_ptr));
+ prs_uint32("parameters_ptr", ps, depth, &(il->parameters_ptr));
+ prs_uint32("secdesc_ptr", ps, depth, &(il->secdesc_ptr));
+
+ prs_uint32("attributes", ps, depth, &(il->attributes));
+ prs_uint32("priority", ps, depth, &(il->priority));
+ prs_uint32("default_priority", ps, depth, &(il->default_priority));
+ prs_uint32("starttime", ps, depth, &(il->starttime));
+ prs_uint32("untiltime", ps, depth, &(il->untiltime));
+ prs_uint32("status", ps, depth, &(il->status));
+ prs_uint32("cjobs", ps, depth, &(il->cjobs));
+ prs_uint32("averageppm", ps, depth, &(il->averageppm));
+
+ smb_io_unistr2("", &(il->servername), il->servername_ptr, ps, depth);
+ smb_io_unistr2("", &(il->printername), il->printername_ptr, ps, depth);
+ smb_io_unistr2("", &(il->sharename), il->sharename_ptr, ps, depth);
+ smb_io_unistr2("", &(il->portname), il->portname_ptr, ps, depth);
+ smb_io_unistr2("", &(il->drivername), il->drivername_ptr, ps, depth);
+ smb_io_unistr2("", &(il->comment), il->comment_ptr, ps, depth);
+ smb_io_unistr2("", &(il->location), il->location_ptr, ps, depth);
+ smb_io_unistr2("", &(il->sepfile), il->sepfile_ptr, ps, depth);
+ smb_io_unistr2("", &(il->printprocessor), il->printprocessor_ptr, ps, depth);
+ smb_io_unistr2("", &(il->datatype), il->datatype_ptr, ps, depth);
+ smb_io_unistr2("", &(il->parameters), il->parameters_ptr, ps, depth);
+
+ prs_align(ps);
+
+ /* this code as nothing to do here !!!
+
+ if (il->secdesc_ptr)
+ {
+ il->secdesc=NULL;
+ sec_io_desc_buf("", &(il->secdesc), ps, depth);
+ }
+
+ */
+}
+
+/*******************************************************************
+********************************************************************/
+void spool_io_printer_info_level(char *desc, SPOOL_PRINTER_INFO_LEVEL *il, prs_struct *ps, int depth)
+{
+ uint32 useless;
+ uint32 level;
+ prs_debug(ps, depth, desc, "");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("info level", ps, depth, &level);
+ prs_uint32("useless", ps, depth, &useless);
+
+ switch (level)
+ {
+ /*
+ * level 0 is used by setprinter when managing the queue
+ * (hold, stop, start a queue)
+ */
+ case 0:
+ break;
+ /*
+ * level 2 is used by addprinter
+ * and by setprinter when updating printer's info
+ */
+ case 2:
+ spool_io_printer_info_level_2("", &(il->info_2), ps, depth);
+ break;
+ }
+
+}
+
+/*******************************************************************
+********************************************************************/
+void spool_io_user_level_1(char *desc, SPOOL_USER_LEVEL_1 **q_u, prs_struct *ps, int depth)
+{
+ SPOOL_USER_LEVEL_1 *il;
+ prs_debug(ps, depth, desc, "");
+ depth++;
+
+ /* reading */
+ if (ps->io)
+ {
+ il=(SPOOL_USER_LEVEL_1 *)malloc(sizeof(SPOOL_USER_LEVEL_1));
+ ZERO_STRUCTP(il);
+ *q_u=il;
+ }
+ else
+ {
+ il=*q_u;
+ }
+
+ prs_align(ps);
+ prs_uint32("size", ps, depth, &(il->size));
+ prs_uint32("client_name_ptr", ps, depth, &(il->client_name_ptr));
+ prs_uint32("user_name_ptr", ps, depth, &(il->user_name_ptr));
+ prs_uint32("build", ps, depth, &(il->build));
+ prs_uint32("major", ps, depth, &(il->major));
+ prs_uint32("minor", ps, depth, &(il->minor));
+ prs_uint32("processor", ps, depth, &(il->processor));
+
+ smb_io_unistr2("", &(il->client_name), il->client_name_ptr, ps, depth);
+ prs_align(ps);
+ smb_io_unistr2("", &(il->user_name), il->user_name_ptr, ps, depth);
+}
+
+/*******************************************************************
+********************************************************************/
+void spool_io_user_level(char *desc, SPOOL_USER_LEVEL *q_u, prs_struct *ps, int depth)
+{
+ uint32 useless;
+ uint32 level;
+ prs_debug(ps, depth, desc, "spool_io_user_level");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("info_level", ps, depth, &level);
+ prs_uint32("useless", ps, depth, &useless);
+
+ switch (level)
+ {
+ case 1:
+ spool_io_user_level_1("", &(q_u->user_level_1), ps, depth);
+ break;
+
+ }
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_q_addprinterex(char *desc, SPOOL_Q_ADDPRINTEREX *q_u, prs_struct *ps, int depth)
+{
+ uint32 useless;
+ prs_debug(ps, depth, desc, "spoolss_io_q_addprinterex");
+ depth++;
+
+ /*
+ * I think that's one of the few well written functions.
+ * the sub-structures are correctly parsed and analysed
+ * the info level are handled in a nice way.
+ */
+
+ prs_align(ps);
+ prs_uint32("useless", ps, depth, &useless);
+ smb_io_unistr2("", &(q_u->server_name),True,ps,depth);
+ prs_align(ps);
+
+ prs_uint32("info_level", ps, depth, &(q_u->level));
+
+ spool_io_printer_info_level("", &(q_u->info), ps, depth);
+
+ /* the 4 unknown are all 0 */
+
+ /*
+ * en fait ils sont pas inconnu
+ * par recoupement avec rpcSetPrinter
+ * c'est le devicemode
+ * et le security descriptor.
+ */
+
+ prs_uint32("unk0", ps, depth, &(q_u->unk0));
+ prs_uint32("unk1", ps, depth, &(q_u->unk1));
+ prs_uint32("unk2", ps, depth, &(q_u->unk2));
+ prs_uint32("unk3", ps, depth, &(q_u->unk3));
+
+ prs_uint32("info_level", ps, depth, &(q_u->user_level));
+
+ spool_io_user_level("", &(q_u->user), ps, depth);
+}
+
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_r_addprinterex(char *desc, SPOOL_R_ADDPRINTEREX *r_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_r_addprinterex");
+ depth++;
+
+ smb_io_prt_hnd("printer handle",&(r_u->handle),ps,depth);
+
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+********************************************************************/
+void spool_io_printer_driver_info_level_3(char *desc, SPOOL_PRINTER_DRIVER_INFO_LEVEL_3 **q_u,
+ prs_struct *ps, int depth)
+{
+ SPOOL_PRINTER_DRIVER_INFO_LEVEL_3 *il;
+
+ prs_debug(ps, depth, desc, "");
+ depth++;
+
+ /* reading */
+ if (ps->io)
+ {
+ il=(SPOOL_PRINTER_DRIVER_INFO_LEVEL_3 *)malloc(sizeof(SPOOL_PRINTER_DRIVER_INFO_LEVEL_3));
+ ZERO_STRUCTP(il);
+ *q_u=il;
+ DEBUG(1,("lecture: memoire ok\n"));
+ }
+ else
+ {
+ il=*q_u;
+ }
+
+ prs_align(ps);
+
+ prs_uint32("cversion", ps, depth, &(il->cversion));
+ prs_uint32("name", ps, depth, &(il->name_ptr));
+ prs_uint32("environment", ps, depth, &(il->environment_ptr));
+ prs_uint32("driverpath", ps, depth, &(il->driverpath_ptr));
+ prs_uint32("datafile", ps, depth, &(il->datafile_ptr));
+ prs_uint32("configfile", ps, depth, &(il->configfile_ptr));
+ prs_uint32("helpfile", ps, depth, &(il->helpfile_ptr));
+ prs_uint32("monitorname", ps, depth, &(il->monitorname_ptr));
+ prs_uint32("defaultdatatype", ps, depth, &(il->defaultdatatype_ptr));
+ prs_uint32("dependentfilessize", ps, depth, &(il->dependentfilessize));
+ prs_uint32("dependentfiles", ps, depth, &(il->dependentfiles_ptr));
+
+ prs_align(ps);
+
+ smb_io_unistr2("", &(il->name), il->name_ptr, ps, depth);
+ smb_io_unistr2("", &(il->environment), il->environment_ptr, ps, depth);
+ smb_io_unistr2("", &(il->driverpath), il->driverpath_ptr, ps, depth);
+ smb_io_unistr2("", &(il->datafile), il->datafile_ptr, ps, depth);
+ smb_io_unistr2("", &(il->configfile), il->configfile_ptr, ps, depth);
+ smb_io_unistr2("", &(il->helpfile), il->helpfile_ptr, ps, depth);
+ smb_io_unistr2("", &(il->monitorname), il->monitorname_ptr, ps, depth);
+ smb_io_unistr2("", &(il->defaultdatatype), il->defaultdatatype_ptr, ps, depth);
+
+ prs_align(ps);
+ if (il->dependentfiles_ptr)
+ smb_io_buffer5("", &(il->dependentfiles), ps, depth);
+
+}
+
+
+/*******************************************************************
+ convert a buffer of UNICODE strings null terminated
+ the buffer is terminated by a NULL
+
+ convert to an ascii array (null terminated)
+
+ dynamically allocate memory
+
+********************************************************************/
+void uniarray_2_ascarray(BUFFER5 *buf5, char ***ar)
+{
+ char **array;
+ char *string;
+ char *destend;
+ char *dest;
+ uint32 n;
+ uint32 i;
+
+ uint16 *src;
+
+ if (buf5==NULL) return;
+
+ array=NULL;
+ n=0;
+ i=0;
+ src=buf5->buffer;
+
+ string=(char *)malloc(sizeof(char)*buf5->buf_len);
+
+ destend = string + buf5->buf_len;
+ dest=string;
+
+ while (dest < destend)
+ {
+ *(dest++) = (char)*(src++);
+ }
+
+ /* that ugly for the first one but that's working */
+ array=(char **)Realloc(array, sizeof(char *)*(i+1));
+ array[i++]=string;
+
+ while ( n < buf5->buf_len )
+ {
+ if ( *(string++) == '\0' )
+ {
+ array=(char **)Realloc(array, sizeof(char *)*(i+1));
+ array[i++]=string;
+ }
+ n++;
+ }
+ *ar=array;
+
+ DEBUG(10,("Number of dependent files: [%d]\n", i-1));
+}
+
+/*******************************************************************
+ read a UNICODE array with null terminated strings
+ and null terminated array
+ and size of array at beginning
+********************************************************************/
+void smb_io_unibuffer(char *desc, UNISTR2 *buffer, prs_struct *ps, int depth)
+{
+
+ if (buffer==NULL) return;
+
+ buffer->undoc=0;
+ buffer->uni_str_len=buffer->uni_max_len;
+
+ prs_uint32("buffer_size", ps, depth, &(buffer->uni_max_len));
+
+ prs_unistr2(True, "buffer ", ps, depth, buffer);
+
+}
+
+/*******************************************************************
+********************************************************************/
+void spool_io_printer_driver_info_level(char *desc, SPOOL_PRINTER_DRIVER_INFO_LEVEL *il, prs_struct *ps, int depth)
+{
+ uint32 useless;
+ uint32 level;
+ prs_debug(ps, depth, desc, "");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("info level", ps, depth, &level);
+ prs_uint32("useless", ps, depth, &useless);
+
+ switch (level)
+ {
+ case 3:
+ spool_io_printer_driver_info_level_3("", &(il->info_3), ps, depth);
+ break;
+ }
+
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_q_addprinterdriver(char *desc, SPOOL_Q_ADDPRINTERDRIVER *q_u, prs_struct *ps, int depth)
+{
+ uint32 useless;
+ prs_debug(ps, depth, desc, "");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("useless", ps, depth, &useless);
+ smb_io_unistr2("", &(q_u->server_name),True,ps,depth);
+ prs_align(ps);
+ prs_uint32("info_level", ps, depth, &(q_u->level));
+
+ spool_io_printer_driver_info_level("", &(q_u->info), ps, depth);
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_r_addprinterdriver(char *desc, SPOOL_R_ADDPRINTERDRIVER *q_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "");
+ depth++;
+
+ prs_uint32("status", ps, depth, &(q_u->status));
+}
+
+
+/*******************************************************************
+********************************************************************/
+void uni_2_asc_printer_driver_3(SPOOL_PRINTER_DRIVER_INFO_LEVEL_3 *uni,
+ NT_PRINTER_DRIVER_INFO_LEVEL_3 **asc)
+{
+ NT_PRINTER_DRIVER_INFO_LEVEL_3 *d;
+
+ DEBUG(7,("uni_2_asc_printer_driver_3: Converting from UNICODE to ASCII\n"));
+
+ if (*asc==NULL)
+ {
+ *asc=(NT_PRINTER_DRIVER_INFO_LEVEL_3 *)malloc(sizeof(NT_PRINTER_DRIVER_INFO_LEVEL_3));
+ ZERO_STRUCTP(*asc);
+ }
+
+ d=*asc;
+
+ d->cversion=uni->cversion;
+
+ unistr2_to_ascii(d->name, &(uni->name), sizeof(d->name)-1);
+ unistr2_to_ascii(d->environment, &(uni->environment), sizeof(d->environment)-1);
+ unistr2_to_ascii(d->driverpath, &(uni->driverpath), sizeof(d->driverpath)-1);
+ unistr2_to_ascii(d->datafile, &(uni->datafile), sizeof(d->datafile)-1);
+ unistr2_to_ascii(d->configfile, &(uni->configfile), sizeof(d->configfile)-1);
+ unistr2_to_ascii(d->helpfile, &(uni->helpfile), sizeof(d->helpfile)-1);
+ unistr2_to_ascii(d->monitorname, &(uni->monitorname), sizeof(d->monitorname)-1);
+ unistr2_to_ascii(d->defaultdatatype, &(uni->defaultdatatype), sizeof(d->defaultdatatype)-1);
+
+ DEBUGADD(8,( "version: %d\n", d->cversion));
+ DEBUGADD(8,( "name: %s\n", d->name));
+ DEBUGADD(8,( "environment: %s\n", d->environment));
+ DEBUGADD(8,( "driverpath: %s\n", d->driverpath));
+ DEBUGADD(8,( "datafile: %s\n", d->datafile));
+ DEBUGADD(8,( "configfile: %s\n", d->configfile));
+ DEBUGADD(8,( "helpfile: %s\n", d->helpfile));
+ DEBUGADD(8,( "monitorname: %s\n", d->monitorname));
+ DEBUGADD(8,( "defaultdatatype: %s\n", d->defaultdatatype));
+
+ uniarray_2_ascarray(&(uni->dependentfiles), &(d->dependentfiles) );
+}
+
+void uni_2_asc_printer_info_2(SPOOL_PRINTER_INFO_LEVEL_2 *uni,
+ NT_PRINTER_INFO_LEVEL_2 **asc)
+{
+ NT_PRINTER_INFO_LEVEL_2 *d;
+
+ DEBUG(7,("Converting from UNICODE to ASCII\n"));
+
+ if (*asc==NULL)
+ {
+ DEBUGADD(8,("allocating memory\n"));
+
+ *asc=(NT_PRINTER_INFO_LEVEL_2 *)malloc(sizeof(NT_PRINTER_INFO_LEVEL_2));
+ ZERO_STRUCTP(*asc);
+ }
+ DEBUGADD(8,("start converting\n"));
+
+ d=*asc;
+
+ d->attributes=uni->attributes;
+ d->priority=uni->priority;
+ d->default_priority=uni->default_priority;
+ d->starttime=uni->starttime;
+ d->untiltime=uni->untiltime;
+ d->status=uni->status;
+ d->cjobs=uni->cjobs;
+
+ unistr2_to_ascii(d->servername, &(uni->servername), sizeof(d->servername)-1);
+ unistr2_to_ascii(d->printername, &(uni->printername), sizeof(d->printername)-1);
+ unistr2_to_ascii(d->sharename, &(uni->sharename), sizeof(d->sharename)-1);
+ unistr2_to_ascii(d->portname, &(uni->portname), sizeof(d->portname)-1);
+ unistr2_to_ascii(d->drivername, &(uni->drivername), sizeof(d->drivername)-1);
+ unistr2_to_ascii(d->comment, &(uni->comment), sizeof(d->comment)-1);
+ unistr2_to_ascii(d->location, &(uni->location), sizeof(d->location)-1);
+ unistr2_to_ascii(d->sepfile, &(uni->sepfile), sizeof(d->sepfile)-1);
+ unistr2_to_ascii(d->printprocessor, &(uni->printprocessor), sizeof(d->printprocessor)-1);
+ unistr2_to_ascii(d->datatype, &(uni->datatype), sizeof(d->datatype)-1);
+ unistr2_to_ascii(d->parameters, &(uni->parameters), sizeof(d->parameters)-1);
+}
+
+void convert_printer_info(SPOOL_PRINTER_INFO_LEVEL uni,
+ NT_PRINTER_INFO_LEVEL *printer,
+ uint32 level)
+{
+ switch (level)
+ {
+ case 2:
+ {
+ uni_2_asc_printer_info_2(uni.info_2, &(printer->info_2));
+ break;
+ }
+ default:
+ break;
+ }
+
+
+}
+
+void convert_printer_driver_info(SPOOL_PRINTER_DRIVER_INFO_LEVEL uni,
+ NT_PRINTER_DRIVER_INFO_LEVEL *printer,
+ uint32 level)
+{
+ switch (level)
+ {
+ case 3:
+ {
+ printer->info_3=NULL;
+ uni_2_asc_printer_driver_3(uni.info_3, &(printer->info_3));
+ break;
+ }
+ default:
+ break;
+ }
+
+
+}
+
+void convert_devicemode(DEVICEMODE devmode, NT_DEVICEMODE *nt_devmode)
+{
+ unistr_to_ascii(nt_devmode->devicename,
+ devmode.devicename.buffer,
+ 31);
+
+ unistr_to_ascii(nt_devmode->formname,
+ devmode.formname.buffer,
+ 31);
+
+ nt_devmode->specversion=devmode.specversion;
+ nt_devmode->driverversion=devmode.driverversion;
+ nt_devmode->size=devmode.size;
+ nt_devmode->driverextra=devmode.driverextra;
+ nt_devmode->fields=devmode.fields;
+ nt_devmode->orientation=devmode.orientation;
+ nt_devmode->papersize=devmode.papersize;
+ nt_devmode->paperlength=devmode.paperlength;
+ nt_devmode->paperwidth=devmode.paperwidth;
+ nt_devmode->scale=devmode.scale;
+ nt_devmode->copies=devmode.copies;
+ nt_devmode->defaultsource=devmode.defaultsource;
+ nt_devmode->printquality=devmode.printquality;
+ nt_devmode->color=devmode.color;
+ nt_devmode->duplex=devmode.duplex;
+ nt_devmode->yresolution=devmode.yresolution;
+ nt_devmode->ttoption=devmode.ttoption;
+ nt_devmode->collate=devmode.collate;
+
+ nt_devmode->logpixels=devmode.logpixels;
+ nt_devmode->bitsperpel=devmode.bitsperpel;
+ nt_devmode->pelswidth=devmode.pelswidth;
+ nt_devmode->pelsheight=devmode.pelsheight;
+ nt_devmode->displayflags=devmode.displayflags;
+ nt_devmode->displayfrequency=devmode.displayfrequency;
+ nt_devmode->icmmethod=devmode.icmmethod;
+ nt_devmode->icmintent=devmode.icmintent;
+ nt_devmode->mediatype=devmode.mediatype;
+ nt_devmode->dithertype=devmode.dithertype;
+ nt_devmode->reserved1=devmode.reserved1;
+ nt_devmode->reserved2=devmode.reserved2;
+ nt_devmode->panningwidth=devmode.panningwidth;
+ nt_devmode->panningheight=devmode.panningheight;
+
+ if (nt_devmode->driverextra != 0)
+ {
+ /* if we had a previous private delete it and make a new one */
+ if (nt_devmode->private != NULL)
+ free(nt_devmode->private);
+ nt_devmode->private=(uint8 *)malloc(nt_devmode->driverextra * sizeof(uint8));
+ memcpy(nt_devmode->private, devmode.private, nt_devmode->driverextra);
+ }
+
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_r_getprinterdriverdir(char *desc, SPOOL_R_GETPRINTERDRIVERDIR *r_u, prs_struct *ps, int depth)
+{
+ uint32 useless_ptr=0xADDE0FF0;
+ uint32 start_offset, end_offset, beginning;
+ uint32 bufsize_required=0;
+
+ prs_debug(ps, depth, desc, "spoolss_io_r_getprinterdriverdir");
+ depth++;
+
+ prs_align(ps);
+
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+
+ switch (r_u->level)
+ {
+ case 1:
+ {
+ DRIVER_DIRECTORY_1 *driver_info_1;
+ driver_info_1=&(r_u->driver.driver_info_1);
+
+ bufsize_required = size_of_relative_string(&(driver_info_1->name));
+ break;
+ }
+ }
+
+ DEBUG(4,("spoolss_io_r_getprinterdriverdir, size needed: %d\n",bufsize_required));
+ DEBUG(4,("spoolss_io_r_getprinterdriverdir, size offered: %d\n",r_u->offered));
+
+ /* check if the buffer is big enough for the datas */
+
+ if (r_u->offered<bufsize_required)
+ {
+
+ /* it's too small */
+ r_u->status=ERROR_INSUFFICIENT_BUFFER; /* say so */
+ r_u->offered=0; /* don't send back the buffer */
+ DEBUG(4,("spoolss_io_r_getprinterdriverdir, buffer too small\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+ }
+ else
+ {
+ mem_grow_data(&(ps->data), ps->io, r_u->offered, 0);
+
+ DEBUG(4,("spoolss_io_r_getprinterdriverdir, buffer large enough\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+ beginning=ps->offset;
+ start_offset=ps->offset;
+ end_offset=start_offset+r_u->offered;
+
+ switch (r_u->level)
+ {
+ case 1:
+ {
+ DRIVER_DIRECTORY_1 *info;
+ info = &(r_u->driver.driver_info_1);
+ prs_unistr("name", ps, depth, &(info->name));
+ /*smb_io_printer_driver_dir_1(desc, info, ps, depth, &start_offset, &end_offset);*/
+ break;
+ }
+ }
+ ps->offset=beginning+r_u->offered;
+ prs_align(ps);
+ }
+
+ /*
+ * if the buffer was too small, send the minimum required size
+ * if it was too large, send the real needed size
+ */
+
+ prs_uint32("size of buffer needed", ps, depth, &(bufsize_required));
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_q_getprinterdriverdir(char *desc, SPOOL_Q_GETPRINTERDRIVERDIR *q_u, prs_struct *ps, int depth)
+{
+
+ uint32 useless_ptr=0xADDE0FF0;
+ prs_debug(ps, depth, desc, "");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+ smb_io_unistr2("", &(q_u->name),True,ps,depth);
+ prs_align(ps);
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+ smb_io_unistr2("", &(q_u->environment),True,ps,depth);
+ prs_align(ps);
+ prs_uint32("level", ps, depth, &(q_u->level));
+ spoolss_io_read_buffer("", ps, depth, &(q_u->buffer));
+ prs_align(ps);
+ prs_uint32("buf_size", ps, depth, &(q_u->buf_size));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_r_enumprintprocessors(char *desc, SPOOL_R_ENUMPRINTPROCESSORS *r_u, prs_struct *ps, int depth)
+{
+ uint32 useless_ptr=0xADDE0FF0;
+ uint32 start_offset, end_offset, beginning;
+ uint32 bufsize_required=0;
+
+ prs_debug(ps, depth, desc, "spoolss_io_r_enumprintprocessors");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("pointer", ps, depth, &useless_ptr);
+ switch (r_u->level)
+ {
+ case 1:
+ {
+ PRINTPROCESSOR_1 *info_1;
+ info_1=r_u->info_1;
+/*
+ for (i=0; i<r_u->numofprintprocessors; i++)
+ {
+ bufsize_required += spoolss_size_port_info_2(&(info_1[i]));
+ }
+*/ break;
+ }
+ }
+
+ DEBUG(4,("size needed: %d\n",bufsize_required));
+ DEBUG(4,("size offered: %d\n",r_u->offered));
+
+ /* check if the buffer is big enough for the datas */
+ if (r_u->offered<bufsize_required)
+ {
+
+ /* it's too small */
+ r_u->status=ERROR_INSUFFICIENT_BUFFER; /* say so */
+ r_u->offered=0; /* don't send back the buffer */
+
+ DEBUG(4,("buffer too small\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+ }
+ else
+ {
+ mem_grow_data(&(ps->data), ps->io, r_u->offered, 0);
+
+ DEBUG(4,("buffer large enough\n"));
+
+ prs_uint32("size of buffer", ps, depth, &(r_u->offered));
+ beginning=ps->offset;
+ start_offset=ps->offset;
+ end_offset=start_offset+r_u->offered;
+
+ switch (r_u->level)
+ {
+ case 2:
+ {
+/* PORT_INFO_2 *info;
+ for (i=0; i<r_u->numofports; i++)
+ {
+ info = &(r_u->port.port_info_2[i]);
+ smb_io_port_2(desc, info, ps, depth, &start_offset, &end_offset);
+ }*/
+ break;
+ }
+ }
+ ps->offset=beginning+r_u->offered;
+ prs_align(ps);
+ }
+
+ /*
+ * if the buffer was too small, send the minimum required size
+ * if it was too large, send the real needed size
+ */
+
+ prs_uint32("size of buffer needed", ps, depth, &(bufsize_required));
+ prs_uint32("numofprintprocessors", ps, depth, &(r_u->numofprintprocessors));
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_q_enumprintprocessors(char *desc, SPOOL_Q_ENUMPRINTPROCESSORS *q_u, prs_struct *ps, int depth)
+{
+ uint32 useless;
+ prs_debug(ps, depth, desc, "spoolss_io_q_enumprintprocessors");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("useless", ps, depth, &useless);
+ smb_io_unistr2("", &(q_u->name),True,ps,depth);
+ prs_align(ps);
+ prs_uint32("useless", ps, depth, &useless);
+ smb_io_unistr2("", &(q_u->environment),True,ps,depth);
+ prs_align(ps);
+ prs_uint32("level", ps, depth, &(q_u->level));
+ spoolss_io_read_buffer("", ps, depth, &(q_u->buffer));
+ prs_align(ps);
+ prs_uint32("buf_size", ps, depth, &(q_u->buf_size));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_r_enumprinterdata(char *desc, SPOOL_R_ENUMPRINTERDATA *r_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_r_enumprintprocessors");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("valuesize", ps, depth, &(r_u->valuesize));
+ prs_unistr("value", ps, depth, &(r_u->value));
+ prs_uint32("realvaluesize", ps, depth, &(r_u->realvaluesize));
+
+ prs_uint32("type", ps, depth, &(r_u->type));
+
+ prs_uint32("datasize", ps, depth, &(r_u->datasize));
+ prs_uint8s(False, "data", ps, depth, r_u->data, r_u->datasize);
+ prs_uint32("realdatasize", ps, depth, &(r_u->realdatasize));
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_q_enumprinterdata(char *desc, SPOOL_Q_ENUMPRINTERDATA *q_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_q_enumprinterdata");
+ depth++;
+
+ prs_align(ps);
+ smb_io_prt_hnd("printer handle",&(q_u->handle),ps,depth);
+ prs_uint32("index", ps, depth, &(q_u->index));
+ prs_uint32("valuesize", ps, depth, &(q_u->valuesize));
+ prs_uint32("datasize", ps, depth, &(q_u->datasize));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_q_setprinterdata(char *desc, SPOOL_Q_SETPRINTERDATA *q_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_q_setprinterdata");
+ depth++;
+
+ prs_align(ps);
+ smb_io_prt_hnd("printer handle", &(q_u->handle), ps, depth);
+ smb_io_unistr2("", &(q_u->value), True, ps, depth);
+
+ prs_align(ps);
+
+ prs_uint32("type", ps, depth, &(q_u->type));
+
+ prs_uint32("max_len", ps, depth, &(q_u->max_len));
+
+ switch (q_u->type)
+ {
+ case 0x1:
+ case 0x3:
+ case 0x4:
+ q_u->data=(uint8 *)malloc(q_u->max_len * sizeof(uint8));
+ prs_uint8s(False,"data", ps, depth, q_u->data, q_u->max_len);
+ prs_align(ps);
+ break;
+ }
+
+ prs_uint32("real_len", ps, depth, &(q_u->real_len));
+}
+
+/*******************************************************************
+********************************************************************/
+void spoolss_io_r_setprinterdata(char *desc, SPOOL_R_SETPRINTERDATA *r_u, prs_struct *ps, int depth)
+{
+ prs_debug(ps, depth, desc, "spoolss_io_r_setprinterdata");
+ depth++;
+
+ prs_align(ps);
+ prs_uint32("status", ps, depth, &(r_u->status));
+}
+
+/*******************************************************************
+********************************************************************/
+void convert_specific_param(NT_PRINTER_PARAM **param, UNISTR2 value , uint32 type, uint8 *data, uint32 len)
+{
+ DEBUG(5,("converting a specific param struct\n"));
+
+ if (*param == NULL)
+ {
+ *param=(NT_PRINTER_PARAM *)malloc(sizeof(NT_PRINTER_PARAM));
+ ZERO_STRUCTP(*param);
+ DEBUGADD(6,("Allocated a new PARAM struct\n"));
+ }
+ unistr2_to_ascii((*param)->value, &value, sizeof((*param)->value)-1);
+ (*param)->type = type;
+
+ /* le champ data n'est pas NULL termine */
+ /* on stocke donc la longueur */
+
+ (*param)->data_len=len;
+
+ (*param)->data=(uint8 *)malloc(len * sizeof(uint8));
+
+ memcpy((*param)->data, data, len);
+
+ DEBUGADD(6,("\tvalue:[%s], len:[%d]\n",(*param)->value, (*param)->data_len));
+}
--- /dev/null
+/*
+ * Unix SMB/Netbios implementation.
+ * Version 1.9.
+ * RPC Pipe client / server routines
+ * Copyright (C) Andrew Tridgell 1992-1998,
+ * Copyright (C) Luke Kenneth Casson Leighton 1996-1998,
+ * Copyright (C) Jean François Micouleau 1998.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include "includes.h"
+#include "nterr.h"
+
+extern int DEBUGLEVEL;
+extern pstring global_myname;
+
+#ifndef MAX_OPEN_PRINTERS
+#define MAX_OPEN_PRINTERS 50
+#endif
+
+#define PRINTER_HANDLE_IS_PRINTER 0
+#define PRINTER_HANDLE_IS_PRINTSERVER 1
+
+
+/* structure to store the printer handles */
+/* and a reference to what it's pointing to */
+/* and the notify info asked about */
+/* that's the central struct */
+static struct
+{
+ BOOL open;
+ BOOL document_started;
+ BOOL page_started;
+ uint32 current_jobid;
+ uint32 document_fd;
+ uint32 document_lastwritten;
+ pstring document_name;
+ pstring job_name;
+ PRINTER_HND printer_hnd;
+ BOOL printer_type;
+ union
+ {
+ fstring printername;
+ fstring printerservername;
+ } dev;
+ uint32 type;
+ uint32 access;
+ uint32 number_of_notify;
+ SPOOL_NOTIFY_OPTION_TYPE notify_info[MAX_PRINTER_NOTIFY+MAX_JOB_NOTIFY];
+} Printer[MAX_OPEN_PRINTERS];
+
+#define VALID_HANDLE(pnum) (((pnum) >= 0) && ((pnum) < MAX_OPEN_PRINTERS))
+#define OPEN_HANDLE(pnum) (VALID_HANDLE(pnum) && Printer[pnum].open)
+
+/****************************************************************************
+ initialise printer handle states...
+****************************************************************************/
+void init_printer_hnd(void)
+{
+ int i;
+ for (i = 0; i < MAX_OPEN_PRINTERS; i++)
+ {
+ Printer[i].open = False;
+ }
+}
+
+
+/****************************************************************************
+ create a unique printer handle
+****************************************************************************/
+static void create_printer_hnd(PRINTER_HND *hnd)
+{
+ static uint32 prt_hnd_low = 0;
+ static uint32 prt_hnd_high = 0;
+
+ if (hnd == NULL) return;
+
+ /* i severely doubt that prt_hnd_high will ever be non-zero... */
+ prt_hnd_low++;
+ if (prt_hnd_low == 0) prt_hnd_high++;
+
+ SIVAL(hnd->data, 0 , 0x0); /* first bit must be null */
+ SIVAL(hnd->data, 4 , prt_hnd_low ); /* second bit is incrementing */
+ SIVAL(hnd->data, 8 , prt_hnd_high); /* second bit is incrementing */
+ SIVAL(hnd->data, 12, time(NULL)); /* something random */
+ SIVAL(hnd->data, 16, getpid()); /* something more random */
+}
+
+/****************************************************************************
+ clear an handle
+****************************************************************************/
+static void clear_handle(PRINTER_HND *hnd)
+{
+ bzero(hnd->data, PRINTER_HND_SIZE);
+}
+
+/****************************************************************************
+ find first available printer slot. creates a printer handle for you.
+ ****************************************************************************/
+static BOOL open_printer_hnd(PRINTER_HND *hnd)
+{
+ int i;
+
+ for (i = 0; i < MAX_OPEN_PRINTERS; i++)
+ {
+ if (!Printer[i].open)
+ {
+ Printer[i].open = True;
+ create_printer_hnd(hnd);
+ memcpy(&(Printer[i].printer_hnd), hnd, sizeof(*hnd));
+
+ DEBUG(4,("Opened printer handle[%x] ", i));
+ dump_data(4, hnd->data, sizeof(hnd->data));
+ return True;
+ }
+ }
+ DEBUG(1,("ERROR - open_printer_hnd: out of Printers Handles!\n"));
+ return False;
+}
+
+/****************************************************************************
+ find printer index by handle
+****************************************************************************/
+static int find_printer_index_by_hnd(PRINTER_HND *hnd)
+{
+ int i;
+
+ for (i = 0; i < MAX_OPEN_PRINTERS; i++)
+ {
+ if (memcmp(&(Printer[i].printer_hnd), hnd, sizeof(*hnd)) == 0)
+ {
+ DEBUG(4,("Found printer handle[%x] ", i));
+ dump_data(4, hnd->data, sizeof(hnd->data));
+ return i;
+ }
+ }
+ DEBUG(3,("Whoops, Printer handle not found: "));
+ dump_data(4, hnd->data, sizeof(hnd->data));
+ return -1;
+}
+
+/****************************************************************************
+ set printer handle type.
+****************************************************************************/
+static BOOL set_printer_hnd_accesstype(PRINTER_HND *hnd, uint32 access_required)
+{
+ int pnum = find_printer_index_by_hnd(hnd);
+
+ if (OPEN_HANDLE(pnum))
+ {
+ DEBUG(4,("Setting printer access=%x (pnum=%x)\n",
+ access_required, pnum));
+
+
+
+ Printer[pnum].access = access_required;
+ return True;
+ }
+ else
+ {
+ DEBUG(4,("Error setting printer type=%x (pnum=%x)",
+ access_required, pnum));
+ return False;
+ }
+ return False;
+}
+
+/****************************************************************************
+ set printer handle type.
+****************************************************************************/
+static BOOL set_printer_hnd_printertype(PRINTER_HND *hnd, char *printername)
+{
+ int pnum = find_printer_index_by_hnd(hnd);
+
+ if (OPEN_HANDLE(pnum))
+ {
+ DEBUG(3,("Setting printer type=%s (pnum=%x)\n", printername, pnum));
+
+ if ( strlen(printername) < 3 )
+ {
+ DEBUGADD(4,("A print server must have at least 1 char ! %s\n", printername));
+ return False;
+ }
+
+ /* check if it's \\server or \\server\printer */
+ /* +2 is to skip the leading \\ */
+ if (!strchr(printername+2, '\\'))
+ {
+ /* it's a print server */
+ DEBUGADD(4,("Printer is a print server\n"));
+ Printer[pnum].printer_type = PRINTER_HANDLE_IS_PRINTSERVER;
+ return True;
+ }
+ else
+ {
+ /* it's a printer */
+ DEBUGADD(4,("Printer is a printer\n"));
+ Printer[pnum].printer_type = PRINTER_HANDLE_IS_PRINTER;
+ return True;
+ }
+ }
+ else
+ {
+ DEBUGADD(4,("Error setting printer name %s (pnum=%x)",
+ printername, pnum));
+ return False;
+ }
+ return False;
+}
+
+/****************************************************************************
+ set printer handle printername.
+****************************************************************************/
+static BOOL set_printer_hnd_printername(PRINTER_HND *hnd, char *printername)
+{
+ int pnum = find_printer_index_by_hnd(hnd);
+ char *back;
+ NT_PRINTER_INFO_LEVEL printer;
+ int snum;
+ int n_services=lp_numservices();
+ uint32 marche;
+
+ if (OPEN_HANDLE(pnum))
+ {
+ DEBUG(4,("Setting printer name=%s (len=%d) (pnum=%x)\n",
+ printername,strlen(printername), pnum));
+
+ switch (Printer[pnum].printer_type)
+ {
+ case PRINTER_HANDLE_IS_PRINTER:
+ back=strchr(printername+2, '\\');
+ back=back+1;
+ DEBUGADD(5,("searching for %s (len=%d)\n", back,strlen(back)));
+ /*
+ * store the Samba share name in it
+ * in back we have the long printer name
+ * need to iterate all the snum and do a
+ * get_a_printer each time to find the printer
+ * faster to do it here than later.
+ */
+ for (snum=0;snum<n_services; snum++)
+ {
+ if (lp_browseable(snum) &&
+ lp_snum_ok(snum) &&
+ lp_print_ok(snum) )
+ {
+ DEBUGADD(5,("get_printer_snum, share:%s\n",lp_servicename(snum)));
+
+ marche=get_a_printer(&printer, 2, lp_servicename(snum));
+ DEBUGADD(6,("get_printer_snum, marche:%d\n",marche));
+
+ if ( marche==0 && ( strlen(printer.info_2->printername) == strlen(back) )
+ && ( !strncasecmp(printer.info_2->printername, back, strlen(back)))
+ )
+ {
+ DEBUGADD(4,("Printer found: %s[%x]\n",lp_servicename(snum),snum));
+ strncpy(Printer[pnum].dev.printername, lp_servicename(snum), strlen(lp_servicename(snum)));
+ return True;
+ break;
+ }
+ free_a_printer(printer, 2);
+ }
+ }
+
+ return False;
+ break;
+ case PRINTER_HANDLE_IS_PRINTSERVER:
+ strncpy(Printer[pnum].dev.printerservername, printername, strlen(printername));
+ return True;
+ break;
+ default:
+ return False;
+ break;
+ }
+ }
+ else
+ {
+ DEBUG(0,("Error setting printer name=%s (pnum=%x)\n",
+ printername , pnum));
+ return False;
+ }
+}
+
+/****************************************************************************
+ return the snum of a printer corresponding to an handle
+****************************************************************************/
+static BOOL get_printer_snum(PRINTER_HND *hnd, int *number)
+{
+ int snum;
+ int pnum = find_printer_index_by_hnd(hnd);
+ int n_services=lp_numservices();
+
+ if (OPEN_HANDLE(pnum))
+ {
+ switch (Printer[pnum].printer_type)
+ {
+ case PRINTER_HANDLE_IS_PRINTER:
+ DEBUG(4,("get_printer_snum, short name:%s\n", Printer[pnum].dev.printername));
+ for (snum=0;snum<n_services; snum++)
+ {
+ if (lp_browseable(snum) && lp_snum_ok(snum) && lp_print_ok(snum) )
+ {
+ DEBUG(4,("get_printer_snum, share:%s\n",lp_servicename(snum)));
+ if ( ( strlen(lp_servicename(snum)) == strlen( Printer[pnum].dev.printername ) )
+ && ( !strncasecmp(lp_servicename(snum),
+ Printer[pnum].dev.printername,
+ strlen( lp_servicename(snum) )))
+ )
+ {
+ DEBUG(4,("Printer found: %s[%x]\n",lp_servicename(snum),snum));
+ *number=snum;
+ return True;
+ break;
+ }
+ }
+ }
+ return False;
+ break;
+ case PRINTER_HANDLE_IS_PRINTSERVER:
+ return False;
+ break;
+ default:
+ return False;
+ break;
+ }
+ }
+ else
+ {
+ DEBUG(3,("Error getting printer - take a nap quickly !\n"));
+ return False;
+ }
+}
+
+/********************************************************************
+ ********************************************************************/
+static BOOL handle_is_printserver(PRINTER_HND *handle)
+{
+ int pnum=find_printer_index_by_hnd(handle);
+
+ if (OPEN_HANDLE(pnum))
+ {
+ switch (Printer[pnum].printer_type)
+ {
+ case PRINTER_HANDLE_IS_PRINTSERVER:
+ return True;
+ break;
+ case PRINTER_HANDLE_IS_PRINTER:
+ return False;
+ break;
+ }
+ }
+ return False;
+}
+
+/********************************************************************
+ ********************************************************************/
+/*
+static BOOL handle_is_printer(PRINTER_HND *handle)
+{
+ return (!handle_is_printserver(handle));
+}
+*/
+
+/********************************************************************
+ * api_spoolss_open_printer
+ *
+ * called from the spoolss dispatcher
+ ********************************************************************/
+static void spoolss_reply_open_printer(SPOOL_Q_OPEN_PRINTER *q_u, prs_struct *rdata)
+{
+ SPOOL_R_OPEN_PRINTER r_u;
+ BOOL printer_open = False;
+ fstring name;
+
+ /* some sanity check because you can open a printer or a print server */
+ /* aka: \\server\printer or \\server */
+ unistr2_to_ascii(name, &(q_u->printername), sizeof(name)-1);
+
+ DEBUGADD(3,("checking name: %s\n",name));
+
+ /* now the response */
+ r_u.status=0x00000000;
+
+ printer_open = open_printer_hnd(&(r_u.handle));
+ set_printer_hnd_printertype(&(r_u.handle), name);
+
+ if ( !set_printer_hnd_printername(&(r_u.handle), name) )
+ {
+ r_u.status=0xC0000000|NT_STATUS_ACCESS_DENIED;
+ }
+
+ set_printer_hnd_accesstype(&(r_u.handle), q_u->access_required);
+
+ spoolss_io_r_open_printer("",&r_u,rdata,0);
+}
+
+/********************************************************************
+ * api_spoolss_open_printer
+ *
+ * called from the spoolss dispatcher
+ ********************************************************************/
+static void api_spoolss_open_printer(uint16 vuid, prs_struct *data, prs_struct *rdata)
+{
+ SPOOL_Q_OPEN_PRINTER q_u;
+
+ /* grab the spoolss open policy */
+ spoolss_io_q_open_printer("", &q_u, data, 0);
+
+ /* construct reply. always indicate success */
+ spoolss_reply_open_printer(&q_u, rdata);
+}
+
+/********************************************************************
+ ********************************************************************/
+static BOOL getprinterdata_printer_server(fstring value, uint32 size, uint32 *type,
+ uint32 *numeric_data, uint8 **data, uint32 *needed)
+{
+
+ if (!strcmp(value, "BeepEnabled"))
+ {
+ *type = 0x4;
+ *data = (uint8 *)malloc( 4*sizeof(uint8) );
+ ZERO_STRUCTP(*data);
+ (*data)[0]=0x01;
+ (*data)[1]=0x00;
+ (*data)[2]=0x00;
+ (*data)[3]=0x00;
+ *numeric_data = 0x1; /* beep enabled */
+ *needed = 0x4;
+ return True;
+ }
+
+ if (!strcmp(value, "EventLog"))
+ {
+ *type = 0x4;
+ *data = (uint8 *)malloc( 4*sizeof(uint8) );
+ ZERO_STRUCTP(*data);
+ (*data)[0]=0x1B;
+ (*data)[1]=0x00;
+ (*data)[2]=0x00;
+ (*data)[3]=0x00;
+ *numeric_data = 0x1B; /* Don't know ??? */
+ *needed = 0x4;
+ return True;
+ }
+
+ if (!strcmp(value, "NetPopup"))
+ {
+ *type = 0x4;
+ *data = (uint8 *)malloc( 4*sizeof(uint8) );
+ ZERO_STRUCTP(*data);
+ (*data)[0]=0x01;
+ (*data)[1]=0x00;
+ (*data)[2]=0x00;
+ (*data)[3]=0x00;
+ *numeric_data = 0x1; /* popup enabled */
+ *needed = 0x4;
+ return True;
+ }
+
+ if (!strcmp(value, "MajorVersion"))
+ {
+ *type = 0x4;
+ *data = (uint8 *)malloc( 4*sizeof(uint8) );
+ (*data)[0]=0x02;
+ (*data)[1]=0x00;
+ (*data)[2]=0x00;
+ (*data)[3]=0x00;
+ *numeric_data = 0x2; /* it's 2, period. */
+ *needed = 0x4;
+ return True;
+ }
+
+ if (!strcmp(value, "DefaultSpoolDirectory"))
+ {
+ pstring directory="You are using a Samba server";
+ *type = 0x1;
+ *data = (uint8 *)malloc( size*sizeof(uint8) );
+ ZERO_STRUCTP(*data);
+ make_unistr((UNISTR *)*data, directory);
+ *needed = 2*(strlen(directory)+1);
+ return True;
+ }
+
+ if (!strcmp(value, "Architecture"))
+ {
+ pstring directory="Windows NT x86";
+ *type = 0x1;
+ *data = (uint8 *)malloc( size*sizeof(uint8) );
+ ZERO_STRUCTP(*data);
+ make_unistr((UNISTR *)*data, directory);
+ *needed = 2*(strlen(directory)+1);
+ return True;
+ }
+
+ return False;
+}
+
+static BOOL getprinterdata_printer(PRINTER_HND *handle, fstring value, uint32 size, uint32 *type,
+ uint32 *numeric_data, uint8 **data, uint32 *needed )
+{
+ NT_PRINTER_INFO_LEVEL printer;
+ int pnum=0;
+ int snum=0;
+ uint8 *idata;
+ uint32 len;
+
+ DEBUG(5,("getprinterdata_printer\n"));
+
+ pnum = find_printer_index_by_hnd(handle);
+ if (OPEN_HANDLE(pnum))
+ {
+ get_printer_snum(handle, &snum);
+ get_a_printer(&printer, 2, lp_servicename(snum));
+
+ if (get_specific_param(printer, 2, value, &idata, type, &len))
+ {
+ switch (*type)
+ {
+ case 1:
+ case 3:
+ case 4:
+ *data = (uint8 *)malloc( size*sizeof(uint8) );
+ bzero(*data, sizeof(uint8)*size);
+ memcpy(*data, idata, len>size?size:len);
+ *needed = len;
+ break;
+ /*case 4:
+ *numeric_data=atoi(idata);
+ break;*/
+ }
+ return (True);
+ }
+
+ }
+
+ return (False);
+}
+
+/********************************************************************
+ * api_spoolss_reply_getprinterdata
+ *
+ * called from api_spoolss_getprinterdata
+ ********************************************************************/
+static void spoolss_reply_getprinterdata(SPOOL_Q_GETPRINTERDATA *q_u, prs_struct *rdata)
+{
+ SPOOL_R_GETPRINTERDATA r_u;
+ fstring value;
+ BOOL found;
+ int pnum = find_printer_index_by_hnd(&(q_u->handle));
+
+ /*
+ * Reminder: when it's a string, the length is in BYTES
+ * even if UNICODE is negociated.
+ *
+ * r_u.type is the kind of data
+ * 1 is a string
+ * 4 is a uint32
+ *
+ * I think it's documented in MSDN somewhere in
+ * the registry data type (yep it's linked ...)
+ *
+ * JFM, 4/19/1999
+ */
+
+ if (OPEN_HANDLE(pnum))
+ {
+ r_u.size = q_u->size;
+ r_u.status = 0x0;
+
+ unistr2_to_ascii(value, &(q_u->valuename), sizeof(value)-1);
+
+ if (handle_is_printserver(&(q_u->handle)))
+ {
+ found=getprinterdata_printer_server(value, r_u.size,
+ &(r_u.type), &(r_u.numeric_data),
+ &(r_u.data), &(r_u.needed));
+ }
+ else
+ {
+ found=getprinterdata_printer(&(q_u->handle), value, r_u.size,
+ &(r_u.type), &(r_u.numeric_data),
+ &(r_u.data), &(r_u.needed));
+ }
+
+ if (found==False)
+ {
+ /* reply this param doesn't exist */
+ r_u.type = 0x4;
+ r_u.size = 0x0;
+ r_u.data = NULL;
+ r_u.numeric_data=0x0;
+ r_u.needed = 0x0;
+ r_u.status = ERROR_INVALID_PARAMETER;
+ }
+
+ spoolss_io_r_getprinterdata("", &r_u, rdata, 0);
+ }
+}
+
+/********************************************************************
+ * api_spoolss_getprinterdata
+ *
+ * called from the spoolss dispatcher
+ ********************************************************************/
+static void api_spoolss_getprinterdata(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_GETPRINTERDATA q_u;
+
+ /* read the stream and fill the struct */
+ spoolss_io_q_getprinterdata("", &q_u, data, 0);
+
+ spoolss_reply_getprinterdata(&q_u,rdata);
+}
+
+/********************************************************************
+ * api_spoolss_reply_closeprinter
+ *
+ * called from api_spoolss_closeprinter
+ ********************************************************************/
+static void spoolss_reply_closeprinter(SPOOL_Q_CLOSEPRINTER *q_u, prs_struct *rdata)
+{
+ SPOOL_R_CLOSEPRINTER r_u;
+
+ int pnum = find_printer_index_by_hnd(&(q_u->handle));
+
+ clear_handle(&(r_u.handle));
+
+ if (OPEN_HANDLE(pnum))
+ {
+ Printer[pnum].open=False;
+ r_u.status=0x0;
+ spoolss_io_r_closeprinter("",&r_u,rdata,0);
+ }
+ else
+ {
+ r_u.status= 0xC0000000 | NT_STATUS_INVALID_HANDLE;
+ DEBUG(3,("Error closing printer handle (pnum=%x)\n", pnum));
+ }
+
+ spoolss_io_r_closeprinter("",&r_u,rdata,0);
+}
+
+/********************************************************************
+ * api_spoolss_closeprinter
+ *
+ * called from the spoolss dispatcher
+ ********************************************************************/
+static void api_spoolss_closeprinter(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_CLOSEPRINTER q_u;
+
+ spoolss_io_q_closeprinter("", &q_u, data, 0);
+
+ spoolss_reply_closeprinter(&q_u,rdata);
+}
+
+/********************************************************************
+ * api_spoolss_reply_rffpcnex
+ *
+ * called from api_spoolss_rffpcnex (see this to understand)
+ ********************************************************************/
+static void spoolss_reply_rffpcnex(SPOOL_Q_RFFPCNEX *q_u, prs_struct *rdata)
+{
+ SPOOL_R_RFFPCNEX r_u;
+
+ r_u.status = 0x0000;
+
+ spoolss_io_r_rffpcnex("",&r_u,rdata,0);
+}
+
+/********************************************************************
+ * api_spoolss_rffpcnex
+ * ReplyFindFirstPrinterChangeNotifyEx
+ * called from the spoolss dispatcher
+ *
+ * jfmxxxx: before replying OK: status=0
+ * should do a rpc call to the workstation asking ReplyOpenPrinter
+ * have to code it, later.
+ *
+ * in fact ReplyOpenPrinter is the changenotify equivalent on the spoolss pipe
+ ********************************************************************/
+static void api_spoolss_rffpcnex(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_RFFPCNEX q_u;
+
+ int i,j,k;
+
+ spoolss_io_q_rffpcnex("", &q_u, data, 0);
+
+ /* store the notify value in the printer struct */
+
+ i=find_printer_index_by_hnd(&(q_u.handle));
+
+ Printer[i].number_of_notify=q_u.option.count;
+
+ DEBUG(3,("Copying %x notify option info\n",Printer[i].number_of_notify));
+
+ for (j=0;j<Printer[i].number_of_notify;j++)
+ {
+ Printer[i].notify_info[j].count=q_u.option.type[j].count;
+ Printer[i].notify_info[j].type=q_u.option.type[j].type ;
+
+ DEBUG(4,("Copying %x info fields of type %x\n",
+ Printer[i].notify_info[j].count,
+ Printer[i].notify_info[j].type));
+ for(k=0;k<Printer[i].notify_info[j].count;k++)
+ {
+ Printer[i].notify_info[j].fields[k]=q_u.option.type[j].fields[k];
+ }
+ }
+ spoolss_reply_rffpcnex(&q_u,rdata);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the servername
+ ********************************************************************/
+static void spoolss_notify_server_name(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ pstring temp_name;
+
+ snprintf(temp_name, sizeof(temp_name), "\\\\%s", global_myname);
+
+ data->notify_data.data.length=strlen(temp_name);
+ ascii_to_unistr(data->notify_data.data.string, temp_name, sizeof(data->notify_data.data.string)-1);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the servicename
+ * jfmxxxx: it's incorrect should be long_printername
+ ********************************************************************/
+static void spoolss_notify_printer_name(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+/*
+ data->notify_data.data.length=strlen(lp_servicename(snum));
+ ascii_to_unistr(data->notify_data.data.string, lp_servicename(snum), sizeof(data->notify_data.data.string)-1);
+*/
+ data->notify_data.data.length=strlen(printer->info_2->printername);
+ ascii_to_unistr(data->notify_data.data.string,
+ printer->info_2->printername,
+ sizeof(data->notify_data.data.string)-1);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the servicename
+ ********************************************************************/
+static void spoolss_notify_share_name(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.data.length=strlen(lp_servicename(snum));
+ ascii_to_unistr(data->notify_data.data.string,
+ lp_servicename(snum),
+ sizeof(data->notify_data.data.string)-1);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the port name
+ ********************************************************************/
+static void spoolss_notify_port_name(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ /* even if it's strange, that's consistant in all the code */
+
+ data->notify_data.data.length=strlen(lp_servicename(snum));
+ ascii_to_unistr(data->notify_data.data.string,
+ lp_servicename(snum),
+ sizeof(data->notify_data.data.string)-1);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the printername
+ * jfmxxxx: it's incorrect, should be lp_printerdrivername()
+ * but it doesn't exist, have to see what to do
+ ********************************************************************/
+static void spoolss_notify_driver_name(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.data.length=strlen(printer->info_2->drivername);
+ ascii_to_unistr(data->notify_data.data.string,
+ printer->info_2->drivername,
+ sizeof(data->notify_data.data.string)-1);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the comment
+ ********************************************************************/
+static void spoolss_notify_comment(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.data.length=strlen(lp_comment(snum));
+ ascii_to_unistr(data->notify_data.data.string,
+ lp_comment(snum),
+ sizeof(data->notify_data.data.string)-1);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the comment
+ * jfm:xxxx incorrect, have to create a new smb.conf option
+ * location = "Room 1, floor 2, building 3"
+ ********************************************************************/
+static void spoolss_notify_location(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.data.length=strlen(printer->info_2->location);
+ ascii_to_unistr(data->notify_data.data.string,
+ printer->info_2->location,
+ sizeof(data->notify_data.data.string)-1);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the device mode
+ * jfm:xxxx don't to it for know but that's a real problem !!!
+ ********************************************************************/
+static void spoolss_notify_devmode(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the separator file name
+ * jfm:xxxx just return no file could add an option to smb.conf
+ * separator file = "separator.txt"
+ ********************************************************************/
+static void spoolss_notify_sepfile(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.data.length=strlen(printer->info_2->sepfile);
+ ascii_to_unistr(data->notify_data.data.string,
+ printer->info_2->sepfile,
+ sizeof(data->notify_data.data.string)-1);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the print processor
+ * jfm:xxxx return always winprint to indicate we don't do anything to it
+ ********************************************************************/
+static void spoolss_notify_print_processor(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.data.length=strlen(printer->info_2->printprocessor);
+ ascii_to_unistr(data->notify_data.data.string,
+ printer->info_2->printprocessor,
+ sizeof(data->notify_data.data.string)-1);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the print processor options
+ * jfm:xxxx send an empty string
+ ********************************************************************/
+static void spoolss_notify_parameters(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.data.length=strlen(printer->info_2->parameters);
+ ascii_to_unistr(data->notify_data.data.string,
+ printer->info_2->parameters,
+ sizeof(data->notify_data.data.string)-1);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the data type
+ * jfm:xxxx always send RAW as data type
+ ********************************************************************/
+static void spoolss_notify_datatype(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.data.length=strlen(printer->info_2->datatype);
+ ascii_to_unistr(data->notify_data.data.string,
+ printer->info_2->datatype,
+ sizeof(data->notify_data.data.string)-1);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the security descriptor
+ * jfm:xxxx send an null pointer to say no security desc
+ * have to implement security before !
+ ********************************************************************/
+static void spoolss_notify_security_desc(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.data.length=0;
+ data->notify_data.data.string[0]=0x00;
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the attributes
+ * jfm:xxxx a samba printer is always shared
+ ********************************************************************/
+static void spoolss_notify_attributes(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.value[0] = PRINTER_ATTRIBUTE_SHARED \
+ | PRINTER_ATTRIBUTE_NETWORK \
+ | PRINTER_ATTRIBUTE_RAW_ONLY ;
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the priority
+ ********************************************************************/
+static void spoolss_notify_priority(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.value[0] = printer->info_2->priority;
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the default priority
+ ********************************************************************/
+static void spoolss_notify_default_priority(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.value[0] = printer->info_2->default_priority;
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the start time
+ ********************************************************************/
+static void spoolss_notify_start_time(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.value[0] = printer->info_2->starttime;
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the until time
+ ********************************************************************/
+static void spoolss_notify_until_time(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.value[0] = printer->info_2->untiltime;
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the status
+ ********************************************************************/
+static void spoolss_notify_status(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ int count;
+ print_queue_struct *q=NULL;
+ print_status_struct status;
+
+ bzero(&status,sizeof(status));
+
+ count=get_printqueue(snum,0,&q,&status);
+
+ data->notify_data.value[0]=(uint32) status.status;
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the number of jobs queued
+ ********************************************************************/
+static void spoolss_notify_cjobs(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ print_queue_struct *q=NULL;
+ print_status_struct status;
+
+ bzero(&status,sizeof(status));
+
+ data->notify_data.value[0]=get_printqueue(snum,0,&q,&status);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with the average ppm
+ ********************************************************************/
+static void spoolss_notify_average_ppm(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ /* always respond 8 pages per minutes */
+ /* a little hard ! */
+ data->notify_data.value[0] = printer->info_2->averageppm;
+}
+
+/*******************************************************************
+ * fill a notify_info_data with
+ ********************************************************************/
+static void spoolss_notify_username(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.data.length=strlen(queue->user);
+ ascii_to_unistr(data->notify_data.data.string, queue->user, sizeof(data->notify_data.data.string)-1);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with
+ ********************************************************************/
+static void spoolss_notify_job_status(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.value[0]=queue->status;
+}
+
+/*******************************************************************
+ * fill a notify_info_data with
+ ********************************************************************/
+static void spoolss_notify_job_name(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.data.length=strlen(queue->file);
+ ascii_to_unistr(data->notify_data.data.string, queue->file, sizeof(data->notify_data.data.string)-1);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with
+ ********************************************************************/
+static void spoolss_notify_job_status_string(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.data.length=strlen("En attente");
+ ascii_to_unistr(data->notify_data.data.string, "En attente", sizeof(data->notify_data.data.string)-1);
+}
+
+/*******************************************************************
+ * fill a notify_info_data with
+ ********************************************************************/
+static void spoolss_notify_job_time(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.value[0]=0x0;
+}
+
+/*******************************************************************
+ * fill a notify_info_data with
+ ********************************************************************/
+static void spoolss_notify_job_size(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.value[0]=queue->size;
+}
+
+/*******************************************************************
+ * fill a notify_info_data with
+ ********************************************************************/
+static void spoolss_notify_job_position(int snum, SPOOL_NOTIFY_INFO_DATA *data, print_queue_struct *queue, NT_PRINTER_INFO_LEVEL *printer)
+{
+ data->notify_data.value[0]=queue->job;
+}
+
+#define END 65535
+
+struct s_notify_info_data_table notify_info_data_table[] =
+{
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_SERVER_NAME, "PRINTER_NOTIFY_SERVER_NAME", POINTER, spoolss_notify_server_name },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_PRINTER_NAME, "PRINTER_NOTIFY_PRINTER_NAME", POINTER, spoolss_notify_printer_name },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_SHARE_NAME, "PRINTER_NOTIFY_SHARE_NAME", POINTER, spoolss_notify_share_name },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_PORT_NAME, "PRINTER_NOTIFY_PORT_NAME", POINTER, spoolss_notify_port_name },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_DRIVER_NAME, "PRINTER_NOTIFY_DRIVER_NAME", POINTER, spoolss_notify_driver_name },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_COMMENT, "PRINTER_NOTIFY_COMMENT", POINTER, spoolss_notify_comment },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_LOCATION, "PRINTER_NOTIFY_LOCATION", POINTER, spoolss_notify_location },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_DEVMODE, "PRINTER_NOTIFY_DEVMODE", POINTER, spoolss_notify_devmode },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_SEPFILE, "PRINTER_NOTIFY_SEPFILE", POINTER, spoolss_notify_sepfile },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_PRINT_PROCESSOR, "PRINTER_NOTIFY_PRINT_PROCESSOR", POINTER, spoolss_notify_print_processor },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_PARAMETERS, "PRINTER_NOTIFY_PARAMETERS", POINTER, spoolss_notify_parameters },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_DATATYPE, "PRINTER_NOTIFY_DATATYPE", POINTER, spoolss_notify_datatype },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_SECURITY_DESCRIPTOR, "PRINTER_NOTIFY_SECURITY_DESCRIPTOR", POINTER, spoolss_notify_security_desc },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_ATTRIBUTES, "PRINTER_NOTIFY_ATTRIBUTES", ONE_VALUE, spoolss_notify_attributes },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_PRIORITY, "PRINTER_NOTIFY_PRIORITY", ONE_VALUE, spoolss_notify_priority },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_DEFAULT_PRIORITY, "PRINTER_NOTIFY_DEFAULT_PRIORITY", ONE_VALUE, spoolss_notify_default_priority },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_START_TIME, "PRINTER_NOTIFY_START_TIME", ONE_VALUE, spoolss_notify_start_time },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_UNTIL_TIME, "PRINTER_NOTIFY_UNTIL_TIME", ONE_VALUE, spoolss_notify_until_time },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_STATUS, "PRINTER_NOTIFY_STATUS", ONE_VALUE, spoolss_notify_status },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_STATUS_STRING, "PRINTER_NOTIFY_STATUS_STRING", POINTER, NULL },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_CJOBS, "PRINTER_NOTIFY_CJOBS", ONE_VALUE, spoolss_notify_cjobs },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_AVERAGE_PPM, "PRINTER_NOTIFY_AVERAGE_PPM", ONE_VALUE, spoolss_notify_average_ppm },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_TOTAL_PAGES, "PRINTER_NOTIFY_TOTAL_PAGES", POINTER, NULL },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_PAGES_PRINTED, "PRINTER_NOTIFY_PAGES_PRINTED", POINTER, NULL },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_TOTAL_BYTES, "PRINTER_NOTIFY_TOTAL_BYTES", POINTER, NULL },
+{ PRINTER_NOTIFY_TYPE, PRINTER_NOTIFY_BYTES_PRINTED, "PRINTER_NOTIFY_BYTES_PRINTED", POINTER, NULL },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_PRINTER_NAME, "JOB_NOTIFY_PRINTER_NAME", POINTER, spoolss_notify_printer_name },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_MACHINE_NAME, "JOB_NOTIFY_MACHINE_NAME", POINTER, spoolss_notify_server_name },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_PORT_NAME, "JOB_NOTIFY_PORT_NAME", POINTER, spoolss_notify_port_name },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_USER_NAME, "JOB_NOTIFY_USER_NAME", POINTER, spoolss_notify_username },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_NOTIFY_NAME, "JOB_NOTIFY_NOTIFY_NAME", POINTER, spoolss_notify_username },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_DATATYPE, "JOB_NOTIFY_DATATYPE", POINTER, spoolss_notify_datatype },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_PRINT_PROCESSOR, "JOB_NOTIFY_PRINT_PROCESSOR", POINTER, spoolss_notify_print_processor },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_PARAMETERS, "JOB_NOTIFY_PARAMETERS", POINTER, spoolss_notify_parameters },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_DRIVER_NAME, "JOB_NOTIFY_DRIVER_NAME", POINTER, spoolss_notify_driver_name },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_DEVMODE, "JOB_NOTIFY_DEVMODE", POINTER, spoolss_notify_devmode },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_STATUS, "JOB_NOTIFY_STATUS", ONE_VALUE, spoolss_notify_job_status },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_STATUS_STRING, "JOB_NOTIFY_STATUS_STRING", POINTER, spoolss_notify_job_status_string },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_SECURITY_DESCRIPTOR, "JOB_NOTIFY_SECURITY_DESCRIPTOR", POINTER, NULL },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_DOCUMENT, "JOB_NOTIFY_DOCUMENT", POINTER, spoolss_notify_job_name },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_PRIORITY, "JOB_NOTIFY_PRIORITY", ONE_VALUE, spoolss_notify_priority },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_POSITION, "JOB_NOTIFY_POSITION", ONE_VALUE, spoolss_notify_job_position },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_SUBMITTED, "JOB_NOTIFY_SUBMITTED", POINTER, NULL },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_START_TIME, "JOB_NOTIFY_START_TIME", ONE_VALUE, spoolss_notify_start_time },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_UNTIL_TIME, "JOB_NOTIFY_UNTIL_TIME", ONE_VALUE, spoolss_notify_until_time },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_TIME, "JOB_NOTIFY_TIME", ONE_VALUE, spoolss_notify_job_time },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_TOTAL_PAGES, "JOB_NOTIFY_TOTAL_PAGES", ONE_VALUE, NULL },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_PAGES_PRINTED, "JOB_NOTIFY_PAGES_PRINTED", ONE_VALUE, NULL },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_TOTAL_BYTES, "JOB_NOTIFY_TOTAL_BYTES", ONE_VALUE, spoolss_notify_job_size },
+{ JOB_NOTIFY_TYPE, JOB_NOTIFY_BYTES_PRINTED, "JOB_NOTIFY_BYTES_PRINTED", ONE_VALUE, NULL },
+{ END, END, "", END, NULL }
+};
+
+/*******************************************************************
+return the size of info_data structure
+********************************************************************/
+uint32 size_of_notify_info_data(uint16 type, uint16 field)
+{
+ int i=0;
+
+ while (notify_info_data_table[i].type != END)
+ {
+ if ( (notify_info_data_table[i].type == type ) &&
+ (notify_info_data_table[i].field == field ) )
+ {
+ return (notify_info_data_table[i].size);
+ continue;
+ }
+ i++;
+ }
+ return (65535);
+}
+
+/*******************************************************************
+return the type of notify_info_data
+********************************************************************/
+BOOL type_of_notify_info_data(uint16 type, uint16 field)
+{
+ int i=0;
+
+ while (notify_info_data_table[i].type != END)
+ {
+ if ( (notify_info_data_table[i].type == type ) &&
+ (notify_info_data_table[i].field == field ) )
+ {
+ if (notify_info_data_table[i].size == POINTER)
+ {
+ return (False);
+ }
+ else
+ {
+ return (True);
+ }
+ continue;
+ }
+ i++;
+ }
+ return (False);
+}
+
+/****************************************************************************
+****************************************************************************/
+static int search_notify(uint16 type, uint16 field, int *value)
+{
+ int j;
+ BOOL found;
+
+ DEBUG(4,("\tsearch_notify: in\n"));
+ for (j=0, found=False; found==False && notify_info_data_table[j].type != END ; j++)
+ {
+ if ( (notify_info_data_table[j].type == type ) &&
+ (notify_info_data_table[j].field == field ) )
+ {
+ found=True;
+ }
+ }
+ *value=--j;
+
+ if ( found && (notify_info_data_table[j].fn != NULL) )
+ {
+ DEBUG(4,("\tsearch_notify: out TRUE\n"));
+ return (True);
+ }
+ else
+ {
+ DEBUG(4,("\tsearch_notify: out FALSE\n"));
+ return (False);
+ }
+}
+
+/****************************************************************************
+****************************************************************************/
+static void construct_info_data(SPOOL_NOTIFY_INFO_DATA *info_data, uint16 type, uint16 field, int id)
+{
+ DEBUG(4,("\tconstruct_info_data: in\n"));
+ info_data->type = type;
+ info_data->field = field;
+ info_data->id = id;
+ info_data->size = size_of_notify_info_data(type, field);
+ info_data->enc_type = type_of_notify_info_data(type, field);
+ DEBUG(4,("\tconstruct_info_data: out\n"));
+}
+
+
+/*******************************************************************
+ *
+ * fill a notify_info struct with info asked
+ *
+ ********************************************************************/
+static void construct_notify_printer_info(SPOOL_NOTIFY_INFO *info, int pnum,
+ int snum, int i, uint32 id)
+{
+
+ int k,j;
+ uint16 type;
+ uint16 field;
+
+ SPOOL_NOTIFY_INFO_DATA *info_data;
+ print_queue_struct *queue=NULL;
+ NT_PRINTER_INFO_LEVEL printer;
+
+ DEBUG(4,("construct_notify_printer_info\n"));
+
+ info_data=&(info->data[info->count]);
+
+ type = Printer[pnum].notify_info[i].type;
+
+ DEBUGADD(4,("Notify number %d -> number of notify info: %d\n",i,Printer[pnum].notify_info[i].count));
+
+ if (!get_a_printer(&printer, 2, lp_servicename(snum)))
+ {
+
+ for(k=0; k<Printer[pnum].notify_info[i].count; k++)
+ {
+ field = Printer[pnum].notify_info[i].fields[k];
+ DEBUGADD(4,("notify [%d]: type [%x], field [%x]\n", k, type, field));
+
+ if (search_notify(type, field, &j) )
+ {
+ DEBUGADD(4,("j=[%d]:%s\n", j, notify_info_data_table[j].name));
+ construct_info_data(info_data, type, field, id);
+
+ DEBUGADD(4,("notify_info_data_table: in\n"));
+ notify_info_data_table[j].fn(snum, info_data, queue, &printer);
+ DEBUGADD(4,("notify_info_data_table: out\n"));
+ info->count++;
+ info_data=&(info->data[info->count]);
+ }
+ }
+
+ free_a_printer(printer, 2);
+ }
+}
+
+/*******************************************************************
+ *
+ * fill a notify_info struct with info asked
+ *
+ ********************************************************************/
+static void construct_notify_jobs_info(print_queue_struct *queue, SPOOL_NOTIFY_INFO *info,
+ int pnum, int snum, int i, uint32 id)
+{
+
+ int k,j;
+ uint16 type;
+ uint16 field;
+
+ SPOOL_NOTIFY_INFO_DATA *info_data;
+ NT_PRINTER_INFO_LEVEL printer;
+
+ DEBUG(4,("construct_notify_jobs_info\n"));
+ info_data=&(info->data[info->count]);
+
+ type = Printer[pnum].notify_info[i].type;
+
+ DEBUGADD(4,("Notify number %d -> number of notify info: %d\n",i,Printer[pnum].notify_info[i].count));
+
+ if (!get_a_printer(&printer, 2, lp_servicename(snum)))
+ {
+ for(k=0; k<Printer[pnum].notify_info[i].count; k++)
+ {
+ field = Printer[pnum].notify_info[i].fields[k];
+ DEBUGADD(4,("notify [%d]: type [%x], field [%x]\n",k, type, field));
+
+ if (search_notify(type, field, &j) )
+ {
+ DEBUGADD(4,("j=[%d]:%s\n", j, notify_info_data_table[j].name));
+ construct_info_data(info_data, type, field, id);
+ DEBUGADD(4,("notify_info_data_table: in\n"));
+ notify_info_data_table[j].fn(snum, info_data, queue, &printer);
+ DEBUGADD(4,("notify_info_data_table: out\n"));
+ info->count++;
+ info_data=&(info->data[info->count]);
+ }
+ }
+ free_a_printer(printer, 2);
+ }
+}
+
+
+/*******************************************************************
+ *
+ * enumerate all printers on the printserver
+ * fill a notify_info struct with info asked
+ *
+ ********************************************************************/
+static void printserver_notify_info(PRINTER_HND *hnd, SPOOL_NOTIFY_INFO *info)
+{
+ int snum;
+ int pnum=find_printer_index_by_hnd(hnd);
+ int n_services=lp_numservices();
+ int i=0;
+ uint32 id=1;
+ info->count=0;
+
+ DEBUG(4,("Enumerating printers\n"));
+
+ for (i=0; i<Printer[pnum].number_of_notify; i++)
+ {
+ if ( Printer[pnum].notify_info[i].type == PRINTER_NOTIFY_TYPE )
+ {
+ for (snum=0; snum<n_services; snum++)
+ {
+ if ( lp_browseable(snum) && lp_snum_ok(snum) && lp_print_ok(snum) )
+ {
+ construct_notify_printer_info(info, pnum, snum, i, id);
+ id++;
+ }
+ }
+ }
+ }
+ DEBUG(4,("All printers enumerated\n"));
+}
+
+/*******************************************************************
+ *
+ * fill a notify_info struct with info asked
+ *
+ ********************************************************************/
+static void printer_notify_info(PRINTER_HND *hnd, SPOOL_NOTIFY_INFO *info)
+{
+ int snum;
+ int pnum=find_printer_index_by_hnd(hnd);
+ int i=0, j;
+ uint32 id=0xFFFF;
+
+ info->count=0;
+
+ if (get_printer_snum(hnd, &snum) )
+ {
+ for (i=0; i<Printer[pnum].number_of_notify; i++)
+ {
+ switch ( Printer[pnum].notify_info[i].type )
+ {
+ case PRINTER_NOTIFY_TYPE:
+ {
+ construct_notify_printer_info(info, pnum, snum, i, id);
+ id--;
+ break;
+ }
+ case JOB_NOTIFY_TYPE:
+ {
+ int count;
+ print_queue_struct *queue=NULL;
+ print_status_struct status;
+ bzero(&status, sizeof(status));
+ count=get_printqueue(snum, 0, &queue, &status);
+ for (j=0; j<count; j++)
+ {
+ construct_notify_jobs_info(&(queue[j]), info, pnum, snum, i, queue[j].job);
+ }
+ break;
+ }
+ }
+ }
+ }
+}
+
+/********************************************************************
+ * api_spoolss_reply_rfnpcnex
+ *
+ * called from api_spoolss_rfnpcnex (see this to understand)
+ ********************************************************************/
+static void spoolss_reply_rfnpcnex(SPOOL_Q_RFNPCNEX *q_u, prs_struct *rdata)
+{
+ SPOOL_R_RFNPCNEX r_u;
+ int pnum=find_printer_index_by_hnd(&(q_u->handle));
+
+ if (OPEN_HANDLE(pnum))
+ {
+ DEBUG(4,("Printer %x of type %x\n",pnum,Printer[pnum].printer_type));
+ switch (Printer[pnum].printer_type)
+ {
+ case PRINTER_HANDLE_IS_PRINTSERVER:
+ printserver_notify_info(&(q_u->handle), &(r_u.info));
+ break;
+ case PRINTER_HANDLE_IS_PRINTER:
+ printer_notify_info(&(q_u->handle), &(r_u.info));
+ break;
+ }
+
+ spoolss_io_r_rfnpcnex("", &r_u, rdata, 0);
+ }
+}
+
+/********************************************************************
+ * api_spoolss_rfnpcnex
+ * ReplyFindNextPrinterChangeNotifyEx
+ * called from the spoolss dispatcher
+ *
+ ********************************************************************/
+static void api_spoolss_rfnpcnex(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_RFNPCNEX q_u;
+
+ spoolss_io_q_rfnpcnex("", &q_u, data, 0);
+
+ spoolss_reply_rfnpcnex(&q_u,rdata);
+}
+
+/********************************************************************
+ * construct_printer_info_0
+ * fill a printer_info_1 struct
+ ********************************************************************/
+static void construct_printer_info_0(PRINTER_INFO_0 *printer,int snum, pstring servername)
+{
+ pstring chaine;
+ int count;
+
+ print_queue_struct *queue=NULL;
+ print_status_struct status;
+ bzero(&status,sizeof(status));
+ count=get_printqueue(snum,0,&queue,&status);
+
+ /* the description and the name are of the form \\server\share */
+ slprintf(chaine,sizeof(chaine)-1,"\\\\%s\\%s",servername, lp_servicename(snum));
+
+ make_unistr(&(printer->printername), chaine);
+
+ slprintf(chaine,sizeof(chaine)-1,"\\\\%s", servername);
+ make_unistr(&(printer->servername), chaine);
+
+ printer->cjobs = count;
+ printer->attributes = PRINTER_ATTRIBUTE_SHARED \
+ | PRINTER_ATTRIBUTE_NETWORK \
+ | PRINTER_ATTRIBUTE_RAW_ONLY ;
+ printer->unknown0 = 0x1; /* pointer */
+ printer->unknown1 = 0x000A07CE; /* don't known */
+ printer->unknown2 = 0x00020005;
+ printer->unknown3 = 0x0006000D;
+ printer->unknown4 = 0x02180026;
+ printer->unknown5 = 0x09;
+ printer->unknown6 = 0x36;
+ printer->majorversion = 0x0004; /* NT 4 */
+ printer->buildversion = 0x0565; /* build 1381 */
+ printer->unknown7 = 0x1;
+ printer->unknown8 = 0x0;
+ printer->unknown9 = 0x2;
+ printer->unknown10 = 0x3;
+ printer->unknown11 = 0x0;
+ printer->unknown12 = 0x0;
+ printer->unknown13 = 0x0;
+ printer->unknown14 = 0x1;
+ printer->unknown15 = 0x024a; /*586 Pentium ? */
+ printer->unknown16 = 0x0;
+ printer->unknown17 = 0x423ed444;
+ printer->unknown18 = 0x0;
+ printer->status = status.status;
+ printer->unknown20 = 0x0;
+ printer->unknown21 = 0x0648;
+ printer->unknown22 = 0x0;
+ printer->unknown23 = 0x5;
+
+}
+
+/********************************************************************
+ * construct_printer_info_1
+ * fill a printer_info_1 struct
+ ********************************************************************/
+static BOOL construct_printer_info_1(PRINTER_INFO_1 *printer,int snum, pstring servername)
+{
+ pstring chaine;
+ NT_PRINTER_INFO_LEVEL ntprinter;
+
+ if (get_a_printer(&ntprinter, 2, lp_servicename(snum)) != 0)
+ {
+ return (False);
+ }
+
+ printer->flags=PRINTER_ENUM_NAME;
+
+ /* the description and the name are of the form \\server\share */
+ slprintf(chaine,sizeof(chaine)-1,"\\\\%s\\%s,%s,%s",servername,
+ ntprinter.info_2->printername,
+ ntprinter.info_2->drivername,
+ lp_comment(snum));
+ make_unistr(&(printer->description), chaine);
+
+ slprintf(chaine,sizeof(chaine)-1,"\\\\%s\\%s", servername, ntprinter.info_2->printername);
+ make_unistr(&(printer->name), chaine);
+
+ make_unistr(&(printer->comment), lp_comment(snum));
+
+ free_a_printer(ntprinter, 2);
+ return (True);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void construct_dev_mode(DEVICEMODE *devmode, int snum, char *servername)
+{
+ char adevice[32];
+ char aform[32];
+ NT_PRINTER_INFO_LEVEL printer;
+ NT_DEVICEMODE *ntdevmode;
+
+ DEBUG(7,("construct_dev_mode\n"));
+
+ bzero(&(devmode->devicename), 2*sizeof(adevice));
+ bzero(&(devmode->formname), 2*sizeof(aform));
+
+ DEBUGADD(8,("getting printer characteristics\n"));
+
+ get_a_printer(&printer, 2, lp_servicename(snum));
+ ntdevmode=(printer.info_2)->devmode;
+
+ DEBUGADD(8,("loading DEVICEMODE\n"));
+ snprintf(adevice, sizeof(adevice), "\\\\%s\\%s", global_myname,
+ printer.info_2->printername);
+ make_unistr(&(devmode->devicename), adevice);
+
+ snprintf(aform, sizeof(aform), ntdevmode->formname);
+ make_unistr(&(devmode->formname), aform);
+
+ devmode->specversion = ntdevmode->specversion;
+ devmode->driverversion = ntdevmode->driverversion;
+ devmode->size = ntdevmode->size;
+ devmode->driverextra = ntdevmode->driverextra;
+ devmode->fields = ntdevmode->fields;
+
+ devmode->orientation = ntdevmode->orientation;
+ devmode->papersize = ntdevmode->papersize;
+ devmode->paperlength = ntdevmode->paperlength;
+ devmode->paperwidth = ntdevmode->paperwidth;
+ devmode->scale = ntdevmode->scale;
+ devmode->copies = ntdevmode->copies;
+ devmode->defaultsource = ntdevmode->defaultsource;
+ devmode->printquality = ntdevmode->printquality;
+ devmode->color = ntdevmode->color;
+ devmode->duplex = ntdevmode->duplex;
+ devmode->yresolution = ntdevmode->yresolution;
+ devmode->ttoption = ntdevmode->ttoption;
+ devmode->collate = ntdevmode->collate;
+ devmode->icmmethod = ntdevmode->icmmethod;
+ devmode->icmintent = ntdevmode->icmintent;
+ devmode->mediatype = ntdevmode->mediatype;
+ devmode->dithertype = ntdevmode->dithertype;
+
+ if (ntdevmode->private != NULL)
+ {
+ devmode->private=(uint8 *)malloc(devmode->driverextra*sizeof(uint8));
+ memcpy(devmode->private, ntdevmode->private, devmode->driverextra);
+ }
+
+ free_a_printer(printer, 2);
+}
+
+/********************************************************************
+ * construct_printer_info_2
+ * fill a printer_info_2 struct
+ ********************************************************************/
+static BOOL construct_printer_info_2(PRINTER_INFO_2 *printer, int snum, pstring servername)
+{
+ pstring chaine;
+ int count;
+ DEVICEMODE *devmode;
+ NT_PRINTER_INFO_LEVEL ntprinter;
+
+ print_queue_struct *queue=NULL;
+ print_status_struct status;
+ bzero(&status, sizeof(status));
+ count=get_printqueue(snum, 0, &queue, &status);
+
+ if (get_a_printer(&ntprinter, 2, lp_servicename(snum)) !=0 )
+ {
+ return (False);
+ }
+
+ snprintf(chaine, sizeof(chaine)-1, "\\\\%s", servername);
+ make_unistr(&(printer->servername), chaine); /* servername*/
+
+ snprintf(chaine, sizeof(chaine)-1, "\\\\%s\\%s", servername, ntprinter.info_2->printername);
+ make_unistr(&(printer->printername), chaine); /* printername*/
+
+ make_unistr(&(printer->sharename), lp_servicename(snum)); /* sharename */
+
+ make_unistr(&(printer->portname), lp_servicename(snum)); /* port */
+ make_unistr(&(printer->drivername), ntprinter.info_2->drivername); /* drivername */
+
+ make_unistr(&(printer->comment), ntprinter.info_2->comment); /* comment */
+ make_unistr(&(printer->location), ntprinter.info_2->location); /* location */
+ make_unistr(&(printer->sepfile), ntprinter.info_2->sepfile); /* separator file */
+ make_unistr(&(printer->printprocessor), ntprinter.info_2->printprocessor);/* print processor */
+ make_unistr(&(printer->datatype), ntprinter.info_2->datatype); /* datatype */
+ make_unistr(&(printer->parameters), ntprinter.info_2->parameters); /* parameters (of print processor) */
+
+ printer->attributes = PRINTER_ATTRIBUTE_SHARED \
+ | PRINTER_ATTRIBUTE_NETWORK \
+ | PRINTER_ATTRIBUTE_RAW_ONLY ; /* attributes */
+
+ printer->priority = ntprinter.info_2->priority; /* priority */
+ printer->defaultpriority = ntprinter.info_2->default_priority; /* default priority */
+ printer->starttime = ntprinter.info_2->starttime; /* starttime */
+ printer->untiltime = ntprinter.info_2->untiltime; /* untiltime */
+ printer->status = status.status; /* status */
+ printer->cjobs = count; /* jobs */
+ printer->averageppm = ntprinter.info_2->averageppm; /* average pages per minute */
+
+ devmode=(DEVICEMODE *)malloc(sizeof(DEVICEMODE));
+ ZERO_STRUCTP(devmode);
+ construct_dev_mode(devmode, snum, servername);
+ printer->devmode=devmode;
+
+ return (True);
+}
+
+/********************************************************************
+ * enum_printer_info_1
+ * glue between spoolss_reply_enumprinters and construct_printer_info_1
+ ********************************************************************/
+static BOOL enum_printer_info_1(PRINTER_INFO_1 **printer, int snum, int number)
+{
+ pstring servername;
+
+ *printer=(PRINTER_INFO_1 *)malloc(sizeof(PRINTER_INFO_1));
+ DEBUG(4,("Allocated memory for ONE PRINTER_INFO_1 at [%p]\n", *printer));
+ pstrcpy(servername, global_myname);
+ if (!construct_printer_info_1(*printer, snum, servername))
+ {
+ free(*printer);
+ return (False);
+ }
+ else
+ {
+ return (True);
+ }
+}
+
+/********************************************************************
+ * enum_printer_info_2
+ * glue between spoolss_reply_enumprinters and construct_printer_info_2
+ ********************************************************************/
+static BOOL enum_printer_info_2(PRINTER_INFO_2 **printer, int snum, int number)
+{
+ pstring servername;
+
+ *printer=(PRINTER_INFO_2 *)malloc(sizeof(PRINTER_INFO_2));
+ DEBUG(4,("Allocated memory for ONE PRINTER_INFO_2 at [%p]\n", *printer));
+ pstrcpy(servername, global_myname);
+ if (!construct_printer_info_2(*printer, snum, servername))
+ {
+ free(*printer);
+ return (False);
+ }
+ else
+ {
+ return (True);
+ }
+}
+
+/********************************************************************
+ * api_spoolss_reply_enumprinters
+ *
+ * called from api_spoolss_enumprinters (see this to understand)
+ ********************************************************************/
+static void enum_all_printers_info_1(PRINTER_INFO_1 ***printers, uint32 *number)
+{
+ int snum;
+ int n_services=lp_numservices();
+ *printers=NULL;
+ *number=0;
+
+ for (snum=0;snum<n_services; snum++)
+ {
+ if (lp_browseable(snum) && lp_snum_ok(snum) && lp_print_ok(snum) )
+ {
+ DEBUG(4,("Found a printer: %s[%x]\n",lp_servicename(snum),snum));
+ *printers=Realloc(*printers, (*number+1)*sizeof(PRINTER_INFO_1 *));
+ DEBUG(4,("ReAlloced memory for [%d] PRINTER_INFO_1 pointers at [%p]\n", *number+1, *printers));
+ if (enum_printer_info_1( &((*printers)[*number]), snum, *number) )
+ {
+ (*number)++;
+ }
+ }
+ }
+}
+
+/********************************************************************
+ * api_spoolss_reply_enumprinters
+ *
+ * called from api_spoolss_enumprinters (see this to understand)
+ ********************************************************************/
+static void enum_all_printers_info_2(PRINTER_INFO_2 ***printers, uint32 *number)
+{
+ int snum;
+ int n_services=lp_numservices();
+ *printers=NULL;
+ *number=0;
+
+ for (snum=0;snum<n_services; snum++)
+ {
+ if (lp_browseable(snum) && lp_snum_ok(snum) && lp_print_ok(snum) )
+ {
+ DEBUG(4,("Found a printer: %s[%x]\n",lp_servicename(snum),snum));
+ *printers=Realloc(*printers, (*number+1)*sizeof(PRINTER_INFO_2 *));
+ DEBUG(4,("ReAlloced memory for [%d] PRINTER_INFO_1 pointers at [%p]\n", *number+1, *printers));
+ if (enum_printer_info_2( &((*printers)[*number]), snum, *number) )
+ {
+ (*number)++;
+ }
+ }
+ }
+}
+
+/****************************************************************************
+****************************************************************************/
+static void free_enum_printers_info_1(PRINTER_INFO_1 **printers, uint32 total)
+{
+ int number=0;
+ if (printers != NULL)
+ {
+ for (number=0; number<total; number++)
+ {
+ if (printers[number] != NULL)
+ {
+ free(printers[number]);
+ }
+ }
+ free(printers);
+ }
+}
+
+/****************************************************************************
+****************************************************************************/
+static void free_enum_printers_info_2(PRINTER_INFO_2 **printers, uint32 total)
+{
+ int number=0;
+ if (printers != NULL)
+ {
+ for (number=0; number<total; number++)
+ {
+ if (printers[number] != NULL)
+ {
+ free(printers[number]->devmode);
+ free(printers[number]);
+ }
+ }
+ free(printers);
+ }
+}
+
+/****************************************************************************
+****************************************************************************/
+static void free_enum_printers_info(SPOOL_R_ENUMPRINTERS *r_u)
+{
+ DEBUG(4,("free_enum_printers_info: [%d] structs to free at level [%d]\n", r_u->returned, r_u->level));
+ switch (r_u->level)
+ {
+ case 1:
+ free_enum_printers_info_1(r_u->printer.printers_1, r_u->returned);
+ break;
+ case 2:
+ free_enum_printers_info_2(r_u->printer.printers_2, r_u->returned);
+ break;
+ }
+}
+
+/********************************************************************
+ * api_spoolss_reply_enumprinters
+ *
+ * called from api_spoolss_enumprinters (see this to understand)
+ ********************************************************************/
+static void spoolss_reply_enumprinters(SPOOL_Q_ENUMPRINTERS *q_u, prs_struct *rdata)
+{
+ SPOOL_R_ENUMPRINTERS r_u;
+
+ DEBUG(4,("Enumerating printers\n"));
+
+ memcpy(r_u.servername.buffer,q_u->servername.buffer,2*q_u->servername.uni_str_len);
+ r_u.servername.buffer[q_u->servername.uni_str_len]=0x0000;
+ r_u.returned=0;
+
+ switch (q_u->level)
+ {
+ case 1:
+ if ( (q_u->flags==PRINTER_ENUM_NAME) || (q_u->flags==PRINTER_ENUM_NETWORK) )
+ /*if (is_a_printerserver(q_u->servername))*/
+ enum_all_printers_info_1(&(r_u.printer.printers_1), &(r_u.returned) );
+ /*else
+ enum_one_printer_info_1(&r_u);*/
+ break;
+ case 2:
+ if ( (q_u->flags==PRINTER_ENUM_NAME) || (q_u->flags==PRINTER_ENUM_NETWORK) )
+ /*if (is_a_printerserver(q_u->servername))*/
+ enum_all_printers_info_2(&(r_u.printer.printers_2), &(r_u.returned) );
+ /*else
+ enum_one_printer_info_2(&r_u);*/
+ break;
+ case 3: /* doesn't exist */
+ break;
+ case 4: /* can't, always on local machine */
+ break;
+ case 5:
+ break;
+
+ }
+ DEBUG(4,("%d printers enumerated\n", r_u.returned));
+ r_u.offered=q_u->buffer.size;
+ r_u.level=q_u->level;
+ r_u.status=0x0000;
+
+ spoolss_io_r_enumprinters("",&r_u,rdata,0);
+ free_enum_printers_info(&r_u);
+}
+
+/********************************************************************
+ * api_spoolss_enumprinters
+ * called from the spoolss dispatcher
+ *
+ ********************************************************************/
+static void api_spoolss_enumprinters(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_ENUMPRINTERS q_u;
+
+ spoolss_io_q_enumprinters("", &q_u, data, 0);
+
+ spoolss_reply_enumprinters(&q_u,rdata);
+}
+
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_getprinter(SPOOL_Q_GETPRINTER *q_u, prs_struct *rdata)
+{
+ SPOOL_R_GETPRINTER r_u;
+ int snum;
+ pstring servername;
+
+ pstrcpy(servername, global_myname);
+
+ get_printer_snum(&(q_u->handle),&snum);
+
+ switch (q_u->level)
+ {
+ case 0:
+ {
+ PRINTER_INFO_0 *printer;
+
+ printer=(PRINTER_INFO_0 *)malloc(sizeof(PRINTER_INFO_0));
+
+ construct_printer_info_0(printer, snum, servername);
+ r_u.printer.info0=printer;
+ r_u.status=0x0000;
+ r_u.offered=q_u->offered;
+ r_u.level=q_u->level;
+
+ spoolss_io_r_getprinter("",&r_u,rdata,0);
+
+ free(printer);
+
+ break;
+ }
+ case 1:
+ {
+ PRINTER_INFO_1 *printer;
+
+ printer=(PRINTER_INFO_1 *)malloc(sizeof(PRINTER_INFO_1));
+
+ construct_printer_info_1(printer, snum, servername);
+
+ r_u.printer.info1=printer;
+ r_u.status=0x0000;
+ r_u.offered=q_u->offered;
+ r_u.level=q_u->level;
+ spoolss_io_r_getprinter("",&r_u,rdata,0);
+
+ free(printer);
+
+ break;
+ }
+ case 2:
+ {
+ PRINTER_INFO_2 *printer;
+
+ printer=(PRINTER_INFO_2 *)malloc(sizeof(PRINTER_INFO_2));
+ construct_printer_info_2(printer, snum, servername);
+
+ r_u.printer.info2=printer;
+ r_u.status=0x0000;
+ r_u.offered=q_u->offered;
+ r_u.level=q_u->level;
+ spoolss_io_r_getprinter("",&r_u,rdata,0);
+
+ free(printer->devmode);
+ free(printer);
+
+ break;
+ }
+ }
+}
+
+/********************************************************************
+ * api_spoolss_getprinter
+ * called from the spoolss dispatcher
+ *
+ ********************************************************************/
+static void api_spoolss_getprinter(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_GETPRINTER q_u;
+
+ spoolss_io_q_getprinter("", &q_u, data, 0);
+
+ spoolss_reply_getprinter(&q_u, rdata);
+}
+
+/********************************************************************
+ * construct_printer_driver_info_1
+ * fill a construct_printer_driver_info_1 struct
+ ********************************************************************/
+static void fill_printer_driver_info_1(DRIVER_INFO_1 *info,
+ NT_PRINTER_DRIVER_INFO_LEVEL driver,
+ pstring servername, fstring architecture)
+{
+ make_unistr( &(info->name), driver.info_3->name);
+}
+
+static void construct_printer_driver_info_1(DRIVER_INFO_1 *info, int snum,
+ pstring servername, fstring architecture)
+{
+ NT_PRINTER_INFO_LEVEL printer;
+ NT_PRINTER_DRIVER_INFO_LEVEL driver;
+
+ get_a_printer(&printer, 2, lp_servicename(snum) );
+ get_a_printer_driver(&driver, 3, printer.info_2->drivername, architecture);
+
+ fill_printer_driver_info_1(info, driver, servername, architecture);
+
+ free_a_printer_driver(driver, 3);
+ free_a_printer(printer, 2);
+}
+
+/********************************************************************
+ * construct_printer_driver_info_2
+ * fill a printer_info_2 struct
+ ********************************************************************/
+static void fill_printer_driver_info_2(DRIVER_INFO_2 *info,
+ NT_PRINTER_DRIVER_INFO_LEVEL driver,
+ pstring servername, fstring architecture)
+{
+ pstring where;
+ pstring temp_driverpath;
+ pstring temp_datafile;
+ pstring temp_configfile;
+ fstring short_archi;
+
+ get_short_archi(short_archi,architecture);
+
+ snprintf(where,sizeof(where)-1,"\\\\%s\\print$\\%s\\", servername, short_archi);
+
+ info->version=driver.info_3->cversion;
+
+ make_unistr( &(info->name), driver.info_3->name );
+ make_unistr( &(info->architecture), architecture );
+
+ snprintf(temp_driverpath, sizeof(temp_driverpath)-1, "%s%s", where,
+ driver.info_3->driverpath);
+ make_unistr( &(info->driverpath), temp_driverpath );
+
+ snprintf(temp_datafile, sizeof(temp_driverpath)-1, "%s%s", where,
+ driver.info_3->datafile);
+ make_unistr( &(info->datafile), temp_datafile );
+
+ snprintf(temp_configfile, sizeof(temp_driverpath)-1, "%s%s", where,
+ driver.info_3->configfile);
+ make_unistr( &(info->configfile), temp_configfile );
+}
+
+/********************************************************************
+ * construct_printer_driver_info_2
+ * fill a printer_info_2 struct
+ ********************************************************************/
+static void construct_printer_driver_info_2(DRIVER_INFO_2 *info, int snum,
+ pstring servername, fstring architecture)
+{
+ NT_PRINTER_INFO_LEVEL printer;
+ NT_PRINTER_DRIVER_INFO_LEVEL driver;
+
+ get_a_printer(&printer, 2, lp_servicename(snum) );
+ get_a_printer_driver(&driver, 3, printer.info_2->drivername, architecture);
+
+ fill_printer_driver_info_2(info, driver, servername, architecture);
+
+ free_a_printer_driver(driver, 3);
+ free_a_printer(printer, 2);
+}
+
+/********************************************************************
+ * construct_printer_info_3
+ * fill a printer_info_3 struct
+ ********************************************************************/
+static void fill_printer_driver_info_3(DRIVER_INFO_3 *info,
+ NT_PRINTER_DRIVER_INFO_LEVEL driver,
+ pstring servername, fstring architecture)
+{
+ pstring where;
+ pstring temp_driverpath;
+ pstring temp_datafile;
+ pstring temp_configfile;
+ pstring temp_helpfile;
+ fstring short_archi;
+
+ get_short_archi(short_archi, architecture);
+
+ snprintf(where,sizeof(where)-1,"\\\\%s\\print$\\%s\\", servername, short_archi);
+
+ info->version=driver.info_3->cversion;
+
+ make_unistr( &(info->name), driver.info_3->name );
+ make_unistr( &(info->architecture), architecture );
+
+ snprintf(temp_driverpath, sizeof(temp_driverpath)-1, "%s%s", where, driver.info_3->driverpath);
+ make_unistr( &(info->driverpath), temp_driverpath );
+
+ snprintf(temp_datafile, sizeof(temp_datafile)-1, "%s%s", where, driver.info_3->datafile);
+ make_unistr( &(info->datafile), temp_datafile );
+
+ snprintf(temp_configfile, sizeof(temp_configfile)-1, "%s%s", where, driver.info_3->configfile);
+ make_unistr( &(info->configfile), temp_configfile );
+
+ snprintf(temp_helpfile, sizeof(temp_helpfile)-1, "%s%s", where, driver.info_3->helpfile);
+ make_unistr( &(info->helpfile), temp_helpfile );
+
+ make_unistr( &(info->monitorname), driver.info_3->monitorname );
+ make_unistr( &(info->defaultdatatype), driver.info_3->defaultdatatype );
+
+ make_unistr( &(info->dependentfiles), "" );
+}
+
+/********************************************************************
+ * construct_printer_info_3
+ * fill a printer_info_3 struct
+ ********************************************************************/
+static void construct_printer_driver_info_3(DRIVER_INFO_3 *info, int snum,
+ pstring servername, fstring architecture)
+{
+ NT_PRINTER_INFO_LEVEL printer;
+ NT_PRINTER_DRIVER_INFO_LEVEL driver;
+
+ get_a_printer(&printer, 2, lp_servicename(snum) );
+ get_a_printer_driver(&driver, 3, printer.info_2->drivername, architecture);
+
+ fill_printer_driver_info_3(info, driver, servername, architecture);
+
+ free_a_printer_driver(driver, 3);
+ free_a_printer(printer, 2);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_getprinterdriver2(SPOOL_Q_GETPRINTERDRIVER2 *q_u, prs_struct *rdata)
+{
+ SPOOL_R_GETPRINTERDRIVER2 r_u;
+ pstring servername;
+ fstring architecture;
+ int snum;
+ DRIVER_INFO_1 *info1=NULL;
+ DRIVER_INFO_2 *info2=NULL;
+ DRIVER_INFO_3 *info3=NULL;
+
+ pstrcpy(servername, global_myname);
+ get_printer_snum(&(q_u->handle),&snum);
+
+ r_u.offered=q_u->buf_size;
+ r_u.level=q_u->level;
+ r_u.status=0x0000;
+
+ unistr2_to_ascii(architecture, &(q_u->architecture), sizeof(architecture) );
+
+ DEBUG(1,("spoolss_reply_getprinterdriver2:[%d]\n", q_u->level));
+
+ switch (q_u->level)
+ {
+ case 1:
+ {
+ info1=(DRIVER_INFO_1 *)malloc(sizeof(DRIVER_INFO_1));
+ construct_printer_driver_info_1(info1, snum, servername, architecture);
+ r_u.printer.info1=info1;
+ break;
+ }
+ case 2:
+ {
+ info2=(DRIVER_INFO_2 *)malloc(sizeof(DRIVER_INFO_2));
+ construct_printer_driver_info_2(info2, snum, servername, architecture);
+ r_u.printer.info2=info2;
+ break;
+ }
+ case 3:
+ {
+ info3=(DRIVER_INFO_3 *)malloc(sizeof(DRIVER_INFO_3));
+ construct_printer_driver_info_3(info3, snum, servername, architecture);
+ r_u.printer.info3=info3;
+ break;
+ }
+ }
+
+ spoolss_io_r_getprinterdriver2("",&r_u,rdata,0);
+
+ if (info1!=NULL) free(info1);
+ if (info2!=NULL) free(info2);
+ if (info3!=NULL) free(info3);
+
+}
+
+/********************************************************************
+ * api_spoolss_getprinter
+ * called from the spoolss dispatcher
+ *
+ ********************************************************************/
+static void api_spoolss_getprinterdriver2(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_GETPRINTERDRIVER2 q_u;
+
+ spoolss_io_q_getprinterdriver2("", &q_u, data, 0);
+
+ spoolss_reply_getprinterdriver2(&q_u, rdata);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_startpageprinter(SPOOL_Q_STARTPAGEPRINTER *q_u, prs_struct *rdata)
+{
+ SPOOL_R_STARTPAGEPRINTER r_u;
+ int pnum = find_printer_index_by_hnd(&(q_u->handle));
+
+ if (OPEN_HANDLE(pnum))
+ {
+ Printer[pnum].page_started=True;
+ r_u.status=0x0;
+
+ spoolss_io_r_startpageprinter("",&r_u,rdata,0);
+ }
+ else
+ {
+ DEBUG(3,("Error in startpageprinter printer handle (pnum=%x)\n",pnum));
+ }
+}
+
+/********************************************************************
+ * api_spoolss_getprinter
+ * called from the spoolss dispatcher
+ *
+ ********************************************************************/
+static void api_spoolss_startpageprinter(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_STARTPAGEPRINTER q_u;
+
+ spoolss_io_q_startpageprinter("", &q_u, data, 0);
+
+ spoolss_reply_startpageprinter(&q_u, rdata);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_endpageprinter(SPOOL_Q_ENDPAGEPRINTER *q_u, prs_struct *rdata)
+{
+ SPOOL_R_ENDPAGEPRINTER r_u;
+ int pnum = find_printer_index_by_hnd(&(q_u->handle));
+
+ if (OPEN_HANDLE(pnum))
+ {
+ Printer[pnum].page_started=False;
+ r_u.status=0x0;
+
+ spoolss_io_r_endpageprinter("",&r_u,rdata,0);
+ }
+ else
+ {
+ DEBUG(3,("Error in endpageprinter printer handle (pnum=%x)\n",pnum));
+ }
+}
+
+/********************************************************************
+ * api_spoolss_getprinter
+ * called from the spoolss dispatcher
+ *
+ ********************************************************************/
+static void api_spoolss_endpageprinter(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_ENDPAGEPRINTER q_u;
+
+ spoolss_io_q_endpageprinter("", &q_u, data, 0);
+
+ spoolss_reply_endpageprinter(&q_u, rdata);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_startdocprinter(SPOOL_Q_STARTDOCPRINTER *q_u, prs_struct *rdata)
+{
+ SPOOL_R_STARTDOCPRINTER r_u;
+ int pnum = find_printer_index_by_hnd(&(q_u->handle));
+
+ if (OPEN_HANDLE(pnum))
+ {
+ r_u.jobid=Printer[pnum].current_jobid;
+ r_u.status=0x0;
+
+ spoolss_io_r_startdocprinter("",&r_u,rdata,0);
+ }
+ else
+ {
+ DEBUG(3,("Error in startdocprinter printer handle (pnum=%x)\n",pnum));
+ }
+}
+
+/********************************************************************
+ * api_spoolss_getprinter
+ * called from the spoolss dispatcher
+ *
+ ********************************************************************/
+static void api_spoolss_startdocprinter(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_STARTDOCPRINTER q_u;
+ pstring fname;
+ pstring tempname;
+ int fd = -1;
+ int snum;
+ int pnum;
+
+ /* decode the stream and fill the struct */
+ spoolss_io_q_startdocprinter("", &q_u, data, 0);
+
+ pnum = find_printer_index_by_hnd(&(q_u.handle));
+
+ if (OPEN_HANDLE(pnum))
+ {
+ /* get the share number of the printer */
+ get_printer_snum(&(q_u.handle),&snum);
+
+ /* Create a temporary file in the printer spool directory
+ * and open it
+ */
+
+ slprintf(tempname,sizeof(tempname)-1, "%s/smb_print.XXXXXX",lp_pathname(snum));
+ pstrcpy(fname, (char *)mktemp(tempname));
+
+ fd=open(fname, O_WRONLY|O_CREAT|O_TRUNC, S_IRUSR|S_IWUSR );
+ DEBUG(4,("Temp spool file created: [%s]\n", fname));
+
+ Printer[pnum].current_jobid=fd;
+ pstrcpy(Printer[pnum].document_name,fname);
+
+ unistr2_to_ascii(Printer[pnum].job_name,
+ &(q_u.doc_info_container.docinfo.doc_info_1.docname),
+ sizeof(Printer[pnum].job_name));
+
+ Printer[pnum].document_fd=fd;
+ Printer[pnum].document_started=True;
+ }
+ spoolss_reply_startdocprinter(&q_u, rdata);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_enddocprinter(SPOOL_Q_ENDDOCPRINTER *q_u, prs_struct *rdata)
+{
+ SPOOL_R_ENDDOCPRINTER r_u;
+ int pnum = find_printer_index_by_hnd(&(q_u->handle));
+
+ if (OPEN_HANDLE(pnum))
+ {
+ r_u.status=0x0;
+
+ spoolss_io_r_enddocprinter("",&r_u,rdata,0);
+ }
+ else
+ {
+ DEBUG(3,("Error in enddocprinter printer handle (pnum=%x)\n",pnum));
+ }
+}
+
+/********************************************************************
+ * api_spoolss_getprinter
+ * called from the spoolss dispatcher
+ *
+ ********************************************************************/
+static void api_spoolss_enddocprinter(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_ENDDOCPRINTER q_u;
+ int pnum;
+ int snum;
+ pstring filename;
+ pstring filename1;
+ pstring job_name;
+ pstring syscmd;
+ char *tstr;
+
+ spoolss_io_q_enddocprinter("", &q_u, data, 0);
+
+ *syscmd=0;
+
+ pnum = find_printer_index_by_hnd(&(q_u.handle));
+
+ if (OPEN_HANDLE(pnum))
+ {
+ Printer[pnum].document_started=False;
+ close(Printer[pnum].document_fd);
+ DEBUG(4,("Temp spool file closed, printing now ...\n"));
+
+ pstrcpy(filename1, Printer[pnum].document_name);
+ pstrcpy(job_name, Printer[pnum].job_name);
+
+ get_printer_snum(&(q_u.handle),&snum);
+
+ /* copy the command into the buffer for extensive meddling. */
+ StrnCpy(syscmd, lp_printcommand(snum), sizeof(pstring) - 1);
+
+ /* look for "%s" in the string. If there is no %s, we cannot print. */
+ if (!strstr(syscmd, "%s") && !strstr(syscmd, "%f"))
+ {
+ DEBUG(2,("WARNING! No placeholder for the filename in the print command for service %s!\n", SERVICE(snum)));
+ }
+
+ if (strstr(syscmd,"%s"))
+ {
+ pstrcpy(filename,filename1);
+ string_sub(syscmd, "%s", filename);
+ }
+
+ string_sub(syscmd, "%f", filename1);
+
+ /* Does the service have a printername? If not, make a fake and empty */
+ /* printer name. That way a %p is treated sanely if no printer */
+ /* name was specified to replace it. This eventuality is logged. */
+ tstr = lp_printername(snum);
+ if (tstr == NULL || tstr[0] == '\0')
+ {
+ DEBUG(3,( "No printer name - using %s.\n", SERVICE(snum)));
+ tstr = SERVICE(snum);
+ }
+
+ string_sub(syscmd, "%p", tstr);
+
+ /* If the lpr command support the 'Job' option replace here */
+ string_sub(syscmd, "%j", job_name);
+
+ if ( *syscmd != '\0')
+ {
+ int ret = smbrun(syscmd, NULL, False);
+ DEBUG(3,("Running the command `%s' gave %d\n", syscmd, ret));
+ }
+ else
+ DEBUG(0,("Null print command?\n"));
+
+ lpq_reset(snum);
+ }
+
+ spoolss_reply_enddocprinter(&q_u, rdata);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_writeprinter(SPOOL_Q_WRITEPRINTER *q_u, prs_struct *rdata)
+{
+ SPOOL_R_WRITEPRINTER r_u;
+ int pnum = find_printer_index_by_hnd(&(q_u->handle));
+
+ if (OPEN_HANDLE(pnum))
+ {
+ r_u.buffer_written=Printer[pnum].document_lastwritten;
+ r_u.status=0x0;
+
+ spoolss_io_r_writeprinter("",&r_u,rdata,0);
+ }
+ else
+ {
+ DEBUG(3,("Error in writeprinter printer handle (pnum=%x)\n",pnum));
+ }
+}
+
+/********************************************************************
+ * api_spoolss_getprinter
+ * called from the spoolss dispatcher
+ *
+ ********************************************************************/
+static void api_spoolss_writeprinter(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_WRITEPRINTER q_u;
+ int pnum;
+ int fd;
+ int size;
+ spoolss_io_q_writeprinter("", &q_u, data, 0);
+
+ pnum = find_printer_index_by_hnd(&(q_u.handle));
+
+ if (OPEN_HANDLE(pnum))
+ {
+ fd=Printer[pnum].document_fd;
+ size=write(fd, q_u.buffer, q_u.buffer_size);
+ Printer[pnum].document_lastwritten=size;
+ }
+
+ spoolss_reply_writeprinter(&q_u, rdata);
+}
+
+/********************************************************************
+ * api_spoolss_getprinter
+ * called from the spoolss dispatcher
+ *
+ ********************************************************************/
+static void control_printer(PRINTER_HND handle, uint32 command)
+{
+ int pnum;
+ int snum;
+ pnum = find_printer_index_by_hnd(&(handle));
+
+ if ( get_printer_snum(&handle, &snum) )
+ {
+ /*
+ * status_printqueue requires a connection_struct
+ *
+ * anybody want to explain me what value it has here ???
+ */
+
+ switch (command)
+ {
+ case PRINTER_CONTROL_PAUSE:
+ /* pause the printer here */
+ status_printqueue(0, snum, LPSTAT_STOPPED);
+ break;
+
+ case PRINTER_CONTROL_RESUME:
+ case PRINTER_CONTROL_UNPAUSE:
+ /* UN-pause the printer here */
+ status_printqueue(0, snum, LPSTAT_OK);
+ break;
+ case PRINTER_CONTROL_PURGE:
+ /* Envoi des dragées FUCA dans l'imprimante */
+ break;
+ }
+ }
+}
+
+/********************************************************************
+ * called by spoolss_api_setprinter
+ * when updating a printer description
+ ********************************************************************/
+static void update_printer(PRINTER_HND handle, uint32 level,
+ SPOOL_PRINTER_INFO_LEVEL info, DEVICEMODE *devmode)
+{
+ int pnum;
+ int snum;
+ NT_PRINTER_INFO_LEVEL printer;
+ NT_DEVICEMODE *nt_devmode;
+
+ nt_devmode=NULL;
+
+ DEBUG(8,("update_printer\n"));
+
+ if (level!=2)
+ {
+ DEBUG(0,("Send a mail to samba-bugs@samba.org\n"));
+ DEBUGADD(0,("with the following message: update_printer: level!=2\n"));
+ return;
+ }
+
+ pnum = find_printer_index_by_hnd(&handle);
+
+ if ( get_printer_snum(&handle, &snum) )
+ {
+ get_a_printer(&printer, level, lp_servicename(snum));
+
+ DEBUGADD(8,("Converting info_2 struct\n"));
+ convert_printer_info(info, &printer, level);
+
+ if ((info.info_2)->devmode_ptr != 0)
+ {
+ /* we have a valid devmode
+ convert it and link it*/
+
+ /* the nt_devmode memory is already alloced
+ * while doing the get_a_printer call
+ * but the devmode private part is not
+ * it's done by convert_devicemode
+ */
+ DEBUGADD(8,("Converting the devicemode struct\n"));
+ nt_devmode=printer.info_2->devmode;
+
+ init_devicemode(nt_devmode);
+
+ convert_devicemode(*devmode, nt_devmode);
+
+ /* now clear the memory used in
+ * the RPC parsing routine
+ */
+ if (devmode->private != NULL)
+ free(devmode->private);
+ free(devmode);
+ }
+ else
+ {
+ if (printer.info_2->devmode != NULL)
+ {
+ free(printer.info_2->devmode);
+ }
+ printer.info_2->devmode=NULL;
+ }
+
+ add_a_printer(printer, level);
+ free_a_printer(printer, level);
+ }
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_setprinter(SPOOL_Q_SETPRINTER *q_u, prs_struct *rdata)
+{
+ SPOOL_R_SETPRINTER r_u;
+
+ /*
+ Let's the sun shine !!!
+ Always respond everything is alright
+ */
+
+ r_u.status=0x0;
+
+ spoolss_io_r_setprinter("",&r_u,rdata,0);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void api_spoolss_setprinter(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_SETPRINTER q_u;
+ int pnum;
+ spoolss_io_q_setprinter("", &q_u, data, 0);
+
+ pnum = find_printer_index_by_hnd(&(q_u.handle));
+
+ if (OPEN_HANDLE(pnum))
+ {
+ /* check the level */
+ switch (q_u.level)
+ {
+ case 0:
+ control_printer(q_u.handle, q_u.command);
+ break;
+ case 2:
+ update_printer(q_u.handle, q_u.level, q_u.info, q_u.devmode);
+ break;
+ }
+ }
+ spoolss_reply_setprinter(&q_u, rdata);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_fcpn(SPOOL_Q_FCPN *q_u, prs_struct *rdata)
+{
+ SPOOL_R_FCPN r_u;
+
+ r_u.status=0x0;
+
+ spoolss_io_r_fcpn("",&r_u,rdata,0);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void api_spoolss_fcpn(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_FCPN q_u;
+
+ spoolss_io_q_fcpn("", &q_u, data, 0);
+
+ spoolss_reply_fcpn(&q_u, rdata);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_addjob(SPOOL_Q_ADDJOB *q_u, prs_struct *rdata)
+{
+ SPOOL_R_ADDJOB r_u;
+
+ r_u.status=0x0;
+
+ spoolss_io_r_addjob("",&r_u,rdata,0);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void api_spoolss_addjob(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_ADDJOB q_u;
+
+ spoolss_io_q_addjob("", &q_u, data, 0);
+
+ spoolss_reply_addjob(&q_u, rdata);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void fill_job_info_1(JOB_INFO_1 *job_info, print_queue_struct *queue,
+ int position, int snum)
+{
+ pstring temp_name;
+
+ struct tm *t;
+ time_t unixdate = time(NULL);
+
+ t=gmtime(&unixdate);
+ snprintf(temp_name, sizeof(temp_name), "\\\\%s", global_myname);
+
+ job_info->jobid=queue->job;
+ make_unistr(&(job_info->printername), lp_servicename(snum));
+ make_unistr(&(job_info->machinename), temp_name);
+ make_unistr(&(job_info->username), queue->user);
+ make_unistr(&(job_info->document), queue->file);
+ make_unistr(&(job_info->datatype), "RAW");
+ make_unistr(&(job_info->text_status), "");
+ job_info->status=queue->status;
+ job_info->priority=queue->priority;
+ job_info->position=position;
+ job_info->totalpages=0;
+ job_info->pagesprinted=0;
+
+ make_systemtime(&(job_info->submitted), t);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void fill_job_info_2(JOB_INFO_2 *job_info, print_queue_struct *queue,
+ int position, int snum)
+{
+ pstring temp_name;
+
+ struct tm *t;
+ time_t unixdate = time(NULL);
+
+ t=gmtime(&unixdate);
+ snprintf(temp_name, sizeof(temp_name), "\\\\%s", global_myname);
+
+ job_info->jobid=queue->job;
+ make_unistr(&(job_info->printername), lp_servicename(snum));
+ make_unistr(&(job_info->machinename), temp_name);
+ make_unistr(&(job_info->username), queue->user);
+ make_unistr(&(job_info->document), queue->file);
+ make_unistr(&(job_info->notifyname), queue->user);
+ make_unistr(&(job_info->datatype), "RAW");
+ make_unistr(&(job_info->printprocessor), "winprint");
+ make_unistr(&(job_info->parameters), "");
+
+/* here the devicemode should be filled up */
+
+ make_unistr(&(job_info->text_status), "");
+
+/* and here the security descriptor */
+
+ job_info->status=queue->status;
+ job_info->priority=queue->priority;
+ job_info->position=position;
+ job_info->starttime=0;
+ job_info->untiltime=0;
+ job_info->totalpages=0;
+ job_info->size=queue->size;
+ make_systemtime(&(job_info->submitted), t);
+ job_info->timeelapsed=0;
+ job_info->pagesprinted=0;
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_enumjobs(SPOOL_Q_ENUMJOBS *q_u, prs_struct *rdata)
+{
+ SPOOL_R_ENUMJOBS r_u;
+ int snum;
+ int count;
+ int i;
+ print_queue_struct *queue=NULL;
+ print_status_struct status;
+ JOB_INFO_1 *job_info_1=NULL;
+ JOB_INFO_2 *job_info_2=NULL;
+
+ DEBUG(4,("spoolss_reply_enumjobs\n"));
+
+ bzero(&status,sizeof(status));
+
+ r_u.offered=q_u->buf_size;
+
+
+ if (get_printer_snum(&(q_u->handle), &snum))
+ {
+ count=get_printqueue(snum, 0, &queue, &status);
+ r_u.numofjobs=count;
+
+ r_u.level=q_u->level;
+
+ DEBUG(4,("count:[%d], status:[%d], [%s]\n", count, status.status, status.message));
+
+ switch (r_u.level)
+ {
+ case 1:
+ {
+ job_info_1=(JOB_INFO_1 *)malloc(count*sizeof(JOB_INFO_1));
+
+ for (i=0; i<count; i++)
+ {
+ fill_job_info_1(&(job_info_1[i]), &(queue[i]), i, snum);
+ }
+ r_u.job.job_info_1=job_info_1;
+ break;
+ }
+ case 2:
+ {
+ job_info_2=(JOB_INFO_2 *)malloc(count*sizeof(JOB_INFO_2));
+
+ for (i=0; i<count; i++)
+ {
+ fill_job_info_2(&(job_info_2[i]), &(queue[i]), i, snum);
+ }
+ r_u.job.job_info_2=job_info_2;
+ break;
+ }
+ }
+
+ }
+
+ r_u.status=0x0;
+
+ spoolss_io_r_enumjobs("",&r_u,rdata,0);
+ switch (r_u.level)
+ {
+ case 1:
+ {
+ free(job_info_1);
+ break;
+ }
+ case 2:
+ {
+ free(job_info_2);
+ break;
+ }
+ }
+}
+
+/****************************************************************************
+****************************************************************************/
+static void api_spoolss_enumjobs(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_ENUMJOBS q_u;
+
+ spoolss_io_q_enumjobs("", &q_u, data, 0);
+
+ spoolss_reply_enumjobs(&q_u, rdata);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_schedulejob(SPOOL_Q_SCHEDULEJOB *q_u, prs_struct *rdata)
+{
+ SPOOL_R_SCHEDULEJOB r_u;
+
+ r_u.status=0x0;
+
+ spoolss_io_r_schedulejob("",&r_u,rdata,0);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void api_spoolss_schedulejob(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_SCHEDULEJOB q_u;
+
+ spoolss_io_q_schedulejob("", &q_u, data, 0);
+
+ spoolss_reply_schedulejob(&q_u, rdata);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_setjob(SPOOL_Q_SETJOB *q_u, prs_struct *rdata)
+{
+ SPOOL_R_SETJOB r_u;
+ int snum;
+ print_queue_struct *queue=NULL;
+ print_status_struct status;
+ int i=0;
+ BOOL found=False;
+ int count;
+
+ bzero(&status,sizeof(status));
+
+ if (get_printer_snum(&(q_u->handle), &snum))
+ {
+ count=get_printqueue(snum, 0, &queue, &status);
+ while ( (i<count) && found==False )
+ {
+ if ( q_u->jobid == queue[i].job )
+ {
+ found=True;
+ }
+ i++;
+ }
+
+ if (found==True)
+ {
+ switch (q_u->command)
+ {
+ case JOB_CONTROL_CANCEL:
+ case JOB_CONTROL_DELETE:
+ {
+ del_printqueue(0, snum, q_u->jobid);
+ break;
+ }
+ case JOB_CONTROL_PAUSE:
+ {
+ status_printjob(0, snum, q_u->jobid, LPQ_PAUSED);
+ break;
+ }
+ case JOB_CONTROL_RESUME:
+ {
+ status_printjob(0, snum, q_u->jobid, LPQ_QUEUED);
+ break;
+ }
+ }
+ }
+ }
+ r_u.status=0x0;
+ spoolss_io_r_setjob("",&r_u,rdata,0);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void api_spoolss_setjob(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_SETJOB q_u;
+
+ spoolss_io_q_setjob("", &q_u, data, 0);
+
+ spoolss_reply_setjob(&q_u, rdata);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_enumprinterdrivers(SPOOL_Q_ENUMPRINTERDRIVERS *q_u, prs_struct *rdata)
+{
+ SPOOL_R_ENUMPRINTERDRIVERS r_u;
+ NT_PRINTER_DRIVER_INFO_LEVEL driver;
+ int count;
+ int i;
+ fstring *list;
+ DRIVER_INFO_1 *driver_info_1=NULL;
+ DRIVER_INFO_2 *driver_info_2=NULL;
+ DRIVER_INFO_3 *driver_info_3=NULL;
+ fstring servername;
+ fstring architecture;
+
+ DEBUG(4,("spoolss_reply_enumdrivers\n"));
+ fstrcpy(servername, global_myname);
+
+ unistr2_to_ascii(architecture, &(q_u->environment), sizeof(architecture));
+ count=get_ntdrivers(&list, architecture);
+
+ DEBUGADD(4,("we have: [%d] drivers on archi [%s]\n",count, architecture));
+ for (i=0; i<count; i++)
+ {
+ DEBUGADD(5,("driver [%s]\n",list[i]));
+ }
+
+ r_u.offered=q_u->buf_size;
+ r_u.numofdrivers=count;
+ r_u.level=q_u->level;
+
+ switch (r_u.level)
+ {
+ case 1:
+ {
+ driver_info_1=(DRIVER_INFO_1 *)malloc(count*sizeof(DRIVER_INFO_1));
+
+ for (i=0; i<count; i++)
+ {
+ get_a_printer_driver(&driver, 3, list[i], architecture);
+ fill_printer_driver_info_1(&(driver_info_1[i]), driver, servername, architecture );
+ free_a_printer_driver(driver, 3);
+ }
+ r_u.driver.driver_info_1=driver_info_1;
+ break;
+ }
+ case 2:
+ {
+ driver_info_2=(DRIVER_INFO_2 *)malloc(count*sizeof(DRIVER_INFO_2));
+
+ for (i=0; i<count; i++)
+ {
+ get_a_printer_driver(&driver, 3, list[i], architecture);
+ fill_printer_driver_info_2(&(driver_info_2[i]), driver, servername, architecture );
+ free_a_printer_driver(driver, 3);
+ }
+ r_u.driver.driver_info_2=driver_info_2;
+ break;
+ }
+ case 3:
+ {
+ driver_info_3=(DRIVER_INFO_3 *)malloc(count*sizeof(DRIVER_INFO_3));
+
+ for (i=0; i<count; i++)
+ {
+ get_a_printer_driver(&driver, 3, list[i], architecture);
+ fill_printer_driver_info_3(&(driver_info_3[i]), driver, servername, architecture );
+ free_a_printer_driver(driver, 3);
+ }
+ r_u.driver.driver_info_3=driver_info_3;
+ break;
+ }
+ }
+
+ r_u.status=0x0;
+
+ spoolss_io_r_enumdrivers("",&r_u,rdata,0);
+
+ switch (r_u.level)
+ {
+ case 1:
+ {
+ free(driver_info_1);
+ break;
+ }
+ case 2:
+ {
+ free(driver_info_2);
+ break;
+ }
+ case 3:
+ {
+ free(driver_info_3);
+ break;
+ }
+ }
+}
+
+/****************************************************************************
+****************************************************************************/
+
+static void api_spoolss_enumprinterdrivers(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_ENUMPRINTERDRIVERS q_u;
+
+ spoolss_io_q_enumprinterdrivers("", &q_u, data, 0);
+
+ spoolss_reply_enumprinterdrivers(&q_u, rdata);
+}
+
+
+/****************************************************************************
+****************************************************************************/
+static void fill_form_1(FORM_1 *form, nt_forms_struct *list, int position)
+{
+ form->flag=list->flag;
+ make_unistr(&(form->name), list->name);
+ form->width=list->width;
+ form->length=list->length;
+ form->left=list->left;
+ form->top=list->top;
+ form->right=list->right;
+ form->bottom=list->bottom;
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_enumforms(SPOOL_Q_ENUMFORMS *q_u, prs_struct *rdata)
+{
+ SPOOL_R_ENUMFORMS r_u;
+ int count;
+ int i;
+ nt_forms_struct *list=NULL;
+ FORM_1 *forms_1=NULL;
+
+ DEBUG(4,("spoolss_reply_enumforms\n"));
+
+ count=get_ntforms(&list);
+ r_u.offered=q_u->buf_size;
+ r_u.numofforms=count;
+ r_u.level=q_u->level;
+ r_u.status=0x0;
+
+ DEBUGADD(5,("Offered buffer size [%d]\n", r_u.offered));
+ DEBUGADD(5,("Number of forms [%d]\n", r_u.numofforms));
+ DEBUGADD(5,("Info level [%d]\n", r_u.level));
+
+ switch (r_u.level)
+ {
+ case 1:
+ {
+ forms_1=(FORM_1 *)malloc(count*sizeof(FORM_1));
+ for (i=0; i<count; i++)
+ {
+ DEBUGADD(6,("Filling form number [%d]\n",i));
+ fill_form_1(&(forms_1[i]), &(list[i]), i);
+ }
+ r_u.forms_1=forms_1;
+ break;
+ }
+ }
+ spoolss_io_r_enumforms("",&r_u,rdata,0);
+ switch (r_u.level)
+ {
+ case 1:
+ {
+ free(forms_1);
+ break;
+ }
+ }
+ free(list);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void api_spoolss_enumforms(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_ENUMFORMS q_u;
+
+ spoolss_io_q_enumforms("", &q_u, data, 0);
+
+ spoolss_reply_enumforms(&q_u, rdata);
+}
+
+static void fill_port_2(PORT_INFO_2 *port, char *name)
+{
+ make_unistr(&(port->port_name), name);
+ make_unistr(&(port->monitor_name), "Moniteur Local");
+ make_unistr(&(port->description), "Local Port");
+#define PORT_TYPE_WRITE 1
+ port->port_type=PORT_TYPE_WRITE;
+ port->reserved=0x0;
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_enumports(SPOOL_Q_ENUMPORTS *q_u, prs_struct *rdata)
+{
+ SPOOL_R_ENUMPORTS r_u;
+ int i=0;
+ PORT_INFO_2 *ports_2=NULL;
+ int n_services=lp_numservices();
+ int snum;
+
+ DEBUG(4,("spoolss_reply_enumports\n"));
+
+ r_u.offered=q_u->buf_size;
+ r_u.level=q_u->level;
+ r_u.status=0x0;
+
+ switch (r_u.level)
+ {
+ case 2:
+ {
+ ports_2=(PORT_INFO_2 *)malloc(n_services*sizeof(PORT_INFO_2));
+ for (snum=0; snum<n_services; snum++)
+ {
+ if ( lp_browseable(snum) && lp_snum_ok(snum) && lp_print_ok(snum) )
+ {
+ DEBUGADD(6,("Filling port number [%d]\n",i));
+ fill_port_2(&(ports_2[i]), lp_servicename(snum));
+ i++;
+ }
+ }
+ r_u.port.port_info_2=ports_2;
+ break;
+ }
+ }
+ r_u.numofports=i;
+ spoolss_io_r_enumports("",&r_u,rdata,0);
+ switch (r_u.level)
+ {
+ case 2:
+ {
+ free(ports_2);
+ break;
+ }
+ }
+}
+
+/****************************************************************************
+****************************************************************************/
+static void api_spoolss_enumports(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_ENUMPORTS q_u;
+
+ spoolss_io_q_enumports("", &q_u, data, 0);
+
+ spoolss_reply_enumports(&q_u, rdata);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_addprinterex(SPOOL_Q_ADDPRINTEREX *q_u, prs_struct *rdata)
+{
+ SPOOL_R_ADDPRINTEREX r_u;
+ BOOL printer_open = False;
+ fstring ascii_name;
+ fstring server_name;
+ fstring share_name;
+ UNISTR2 *portname;
+ SPOOL_PRINTER_INFO_LEVEL_2 *info2;
+ SPOOL_PRINTER_INFO_LEVEL *info;
+
+ info=&(q_u->info);
+ info2=info->info_2;
+ portname=&(info2->portname);
+
+ r_u.status=0x0; /* everything is always nice in this world */
+
+ StrnCpy(server_name, global_myname, strlen(global_myname) );
+ unistr2_to_ascii(share_name, portname, sizeof(share_name)-1);
+
+ slprintf(ascii_name, sizeof(ascii_name)-1, "\\\\%s\\%s",
+ server_name, share_name);
+
+ printer_open = open_printer_hnd(&(r_u.handle));
+ set_printer_hnd_printertype(&(r_u.handle), ascii_name);
+ set_printer_hnd_printername(&(r_u.handle), ascii_name);
+
+ spoolss_io_r_addprinterex("", &r_u, rdata, 0);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void api_spoolss_addprinterex(uint16 vuid, prs_struct *data, prs_struct *rdata)
+{
+ SPOOL_Q_ADDPRINTEREX q_u;
+ NT_PRINTER_INFO_LEVEL printer;
+
+ /* read the stream and decode */
+ spoolss_io_q_addprinterex("", &q_u, data, 0);
+
+ /* NULLify info_2 here */
+ /* don't put it in convert_printer_info as it's used also with non-NULL values */
+ printer.info_2=NULL;
+
+ /* convert from UNICODE to ASCII */
+ convert_printer_info(q_u.info, &printer, q_u.level);
+
+ /* write the ASCII on disk */
+ add_a_printer(printer, q_u.level);
+
+ spoolss_reply_addprinterex(&q_u, rdata);
+ /* free mem used in q_u and r_u */
+
+ /* free_add_printer(q_u, r_u); */
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_addprinterdriver(SPOOL_Q_ADDPRINTERDRIVER *q_u, prs_struct *rdata)
+{
+ SPOOL_R_ADDPRINTERDRIVER r_u;
+
+ r_u.status=0x0; /* everything is always nice in this world */
+
+ spoolss_io_r_addprinterdriver("", &r_u, rdata, 0);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void api_spoolss_addprinterdriver(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_ADDPRINTERDRIVER q_u;
+ NT_PRINTER_DRIVER_INFO_LEVEL driver;
+
+ spoolss_io_q_addprinterdriver("", &q_u, data, 0);
+
+ convert_printer_driver_info(q_u.info, &driver, q_u.level);
+
+ add_a_printer_driver(driver, q_u.level);
+
+ spoolss_reply_addprinterdriver(&q_u, rdata);
+ /* free mem used in q_u and r_u */
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_getprinterdriverdirectory(SPOOL_Q_GETPRINTERDRIVERDIR *q_u, prs_struct *rdata)
+{
+ SPOOL_R_GETPRINTERDRIVERDIR r_u;
+ pstring chaine;
+ pstring long_archi;
+ pstring archi;
+
+ r_u.offered=q_u->buf_size;
+ r_u.level=q_u->level;
+ r_u.status=0x0;
+
+ unistr2_to_ascii(long_archi, &(q_u->environment), sizeof(long_archi)-1);
+ get_short_archi(archi, long_archi);
+
+ slprintf(chaine,sizeof(chaine)-1,"\\\\%s\\print$\\%s", global_myname, archi);
+
+ DEBUG(4,("printer driver directory: [%s]\n", chaine));
+
+ make_unistr(&(r_u.driver.driver_info_1.name), chaine);
+
+ spoolss_io_r_getprinterdriverdir("", &r_u, rdata, 0);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void api_spoolss_getprinterdriverdirectory(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_GETPRINTERDRIVERDIR q_u;
+
+ spoolss_io_q_getprinterdriverdir("", &q_u, data, 0);
+
+ spoolss_reply_getprinterdriverdirectory(&q_u, rdata);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_enumprinterdata(SPOOL_Q_ENUMPRINTERDATA *q_u, prs_struct *rdata)
+{
+ SPOOL_R_ENUMPRINTERDATA r_u;
+ NT_PRINTER_INFO_LEVEL printer;
+
+ uint32 type;
+ fstring value;
+ uint8 *data;
+
+ uint32 param_index;
+ uint32 biggest_valuesize;
+ uint32 biggest_datasize;
+ uint32 data_len;
+
+ int pnum = find_printer_index_by_hnd(&(q_u->handle));
+ int snum;
+
+ DEBUG(5,("spoolss_reply_enumprinterdata\n"));
+
+ if (OPEN_HANDLE(pnum))
+ {
+ get_printer_snum(&(q_u->handle), &snum);
+ get_a_printer(&printer, 2, lp_servicename(snum));
+
+ /* The NT machine wants to know the biggest size of value and data */
+ if ( (q_u->valuesize==0) && (q_u->datasize==0) )
+ {
+ DEBUGADD(6,("Activating NT mega-hack to find sizes\n"));
+
+ r_u.valuesize=0;
+ r_u.realvaluesize=0;
+ r_u.type=0;
+ r_u.datasize=0;
+ r_u.realdatasize=0;
+
+ param_index=0;
+ biggest_valuesize=0;
+ biggest_datasize=0;
+
+ while (get_specific_param_by_index(printer, 2, param_index, value, &data, &type, &data_len))
+ {
+ if (strlen(value) > biggest_valuesize) biggest_valuesize=strlen(value);
+ if (data_len > biggest_datasize) biggest_datasize=data_len;
+
+ param_index++;
+ }
+
+ /* I wrote it, I didn't designed the protocol */
+ SIVAL(&(r_u.value),0, 2*(biggest_valuesize+1) );
+ r_u.data=(uint8 *)malloc(4*sizeof(uint8));
+ SIVAL(r_u.data, 0, biggest_datasize );
+ }
+ else
+ {
+ /*
+ * the value len is wrong in NT sp3
+ * that's the number of bytes not the number of unicode chars
+ */
+
+ r_u.valuesize=q_u->valuesize;
+ r_u.datasize=q_u->datasize;
+
+ if (get_specific_param_by_index(printer, 2, q_u->index, value, &data, &type, &data_len))
+ {
+ make_unistr(&(r_u.value), value);
+ r_u.data=data;
+
+ r_u.type=type;
+
+ /* the length are in bytes including leading NULL */
+ r_u.realvaluesize=2*(strlen(value)+1);
+ r_u.realdatasize=data_len;
+
+ r_u.status=0;
+ }
+ else
+ {
+ r_u.valuesize=0;
+ r_u.realvaluesize=0;
+ r_u.datasize=0;
+ r_u.realdatasize=0;
+ r_u.type=0;
+ r_u.status=0x0103; /* ERROR_NO_MORE_ITEMS */
+ }
+ }
+
+ free_a_printer(printer, 2);
+ }
+ spoolss_io_r_enumprinterdata("", &r_u, rdata, 0);
+ free(r_u.data);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void api_spoolss_enumprinterdata(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_ENUMPRINTERDATA q_u;
+
+ spoolss_io_q_enumprinterdata("", &q_u, data, 0);
+
+ spoolss_reply_enumprinterdata(&q_u, rdata);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void spoolss_reply_setprinterdata(SPOOL_Q_SETPRINTERDATA *q_u, prs_struct *rdata)
+{
+ SPOOL_R_SETPRINTERDATA r_u;
+ NT_PRINTER_INFO_LEVEL printer;
+ NT_PRINTER_PARAM *param = NULL;
+
+ int pnum=0;
+ int snum=0;
+
+ DEBUG(5,("spoolss_reply_setprinterdata\n"));
+
+ pnum = find_printer_index_by_hnd(&(q_u->handle));
+
+ if (OPEN_HANDLE(pnum))
+ {
+ get_printer_snum(&(q_u->handle), &snum);
+ get_a_printer(&printer, 2, lp_servicename(snum));
+ convert_specific_param(¶m, q_u->value , q_u->type, q_u->data, q_u->real_len);
+
+ unlink_specific_param_if_exist(printer.info_2, param);
+
+ add_a_specific_param(printer.info_2, param);
+
+ add_a_printer(printer, 2);
+
+ free_a_printer(printer, 2);
+ }
+
+ r_u.status = 0x0;
+ spoolss_io_r_setprinterdata("", &r_u, rdata, 0);
+}
+
+/****************************************************************************
+****************************************************************************/
+static void api_spoolss_setprinterdata(uint16 vuid, prs_struct *data,
+ prs_struct *rdata)
+{
+ SPOOL_Q_SETPRINTERDATA q_u;
+
+ spoolss_io_q_setprinterdata("", &q_u, data, 0);
+
+ spoolss_reply_setprinterdata(&q_u, rdata);
+
+ free(q_u.data);
+}
+
+/*******************************************************************
+\pipe\spoolss commands
+********************************************************************/
+struct api_struct api_spoolss_cmds[] =
+{
+ {"SPOOLSS_OPENPRINTEREX", SPOOLSS_OPENPRINTEREX, api_spoolss_open_printer },
+ {"SPOOLSS_GETPRINTERDATA", SPOOLSS_GETPRINTERDATA, api_spoolss_getprinterdata },
+ {"SPOOLSS_CLOSEPRINTER", SPOOLSS_CLOSEPRINTER, api_spoolss_closeprinter },
+ {"SPOOLSS_RFFPCNEX", SPOOLSS_RFFPCNEX, api_spoolss_rffpcnex },
+ {"SPOOLSS_RFNPCNEX", SPOOLSS_RFNPCNEX, api_spoolss_rfnpcnex },
+ {"SPOOLSS_ENUMPRINTERS", SPOOLSS_ENUMPRINTERS, api_spoolss_enumprinters },
+ {"SPOOLSS_GETPRINTER", SPOOLSS_GETPRINTER, api_spoolss_getprinter },
+ {"SPOOLSS_GETPRINTERDRIVER2", SPOOLSS_GETPRINTERDRIVER2, api_spoolss_getprinterdriver2 },
+ {"SPOOLSS_STARTPAGEPRINTER", SPOOLSS_STARTPAGEPRINTER, api_spoolss_startpageprinter },
+ {"SPOOLSS_ENDPAGEPRINTER", SPOOLSS_ENDPAGEPRINTER, api_spoolss_endpageprinter },
+ {"SPOOLSS_STARTDOCPRINTER", SPOOLSS_STARTDOCPRINTER, api_spoolss_startdocprinter },
+ {"SPOOLSS_ENDDOCPRINTER", SPOOLSS_ENDDOCPRINTER, api_spoolss_enddocprinter },
+ {"SPOOLSS_WRITEPRINTER", SPOOLSS_WRITEPRINTER, api_spoolss_writeprinter },
+ {"SPOOLSS_SETPRINTER", SPOOLSS_SETPRINTER, api_spoolss_setprinter },
+ {"SPOOLSS_FCPN", SPOOLSS_FCPN, api_spoolss_fcpn },
+ {"SPOOLSS_ADDJOB", SPOOLSS_ADDJOB, api_spoolss_addjob },
+ {"SPOOLSS_ENUMJOBS", SPOOLSS_ENUMJOBS, api_spoolss_enumjobs },
+ {"SPOOLSS_SCHEDULEJOB", SPOOLSS_SCHEDULEJOB, api_spoolss_schedulejob },
+ {"SPOOLSS_SETJOB", SPOOLSS_SETJOB, api_spoolss_setjob },
+ {"SPOOLSS_ENUMFORMS", SPOOLSS_ENUMFORMS, api_spoolss_enumforms },
+ {"SPOOLSS_ENUMPORTS", SPOOLSS_ENUMPORTS, api_spoolss_enumports },
+ {"SPOOLSS_ENUMPRINTERDRIVERS", SPOOLSS_ENUMPRINTERDRIVERS, api_spoolss_enumprinterdrivers },
+ {"SPOOLSS_ADDPRINTEREX", SPOOLSS_ADDPRINTEREX, api_spoolss_addprinterex },
+ {"SPOOLSS_ADDPRINTERDRIVER", SPOOLSS_ADDPRINTERDRIVER, api_spoolss_addprinterdriver },
+ {"SPOOLSS_GETPRINTERDRIVERDIRECTORY", SPOOLSS_GETPRINTERDRIVERDIRECTORY, api_spoolss_getprinterdriverdirectory },
+ {"SPOOLSS_ENUMPRINTERDATA", SPOOLSS_ENUMPRINTERDATA, api_spoolss_enumprinterdata },
+ {"SPOOLSS_SETPRINTERDATA", SPOOLSS_SETPRINTERDATA, api_spoolss_setprinterdata },
+ { NULL, 0, NULL }
+};
+
+/*******************************************************************
+receives a spoolss pipe and responds.
+********************************************************************/
+BOOL api_spoolss_rpc(pipes_struct *p, prs_struct *data)
+{
+ return api_rpcTNP(p, "api_spoolss_rpc", api_spoolss_cmds, data);
+}
+
git.samba.org / tprouty / samba.git / commitdiff