i2c-stub: Support multiple chips
authorJean Delvare <khali@linux-fr.org>
Sat, 13 Oct 2007 21:56:31 +0000 (23:56 +0200)
committerJean Delvare <khali@hyperion.delvare>
Sat, 13 Oct 2007 21:56:31 +0000 (23:56 +0200)
Add support for multiple chips to i2c-stub. I've changed the memory
allocation scheme from static to dynamic, so that we don't waste too
much memory.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Mark M. Hoffman <mhoffman@lightlink.com>
Documentation/i2c/i2c-stub
drivers/i2c/busses/i2c-stub.c

index 9cc081e697648ecb3feaadddcc4b8da187294db9..89e69ad3436c6f62443335762797442605b1af1d 100644 (file)
@@ -6,13 +6,14 @@ This module is a very simple fake I2C/SMBus driver.  It implements four
 types of SMBus commands: write quick, (r/w) byte, (r/w) byte data, and
 (r/w) word data.
 
-You need to provide a chip address as a module parameter when loading
-this driver, which will then only react to SMBus commands to this address.
+You need to provide chip addresses as a module parameter when loading this
+driver, which will then only react to SMBus commands to these addresses.
 
 No hardware is needed nor associated with this module.  It will accept write
-quick commands to one address; it will respond to the other commands (also
-to one address) by reading from or writing to an array in memory.  It will
-also spam the kernel logs for every command it handles.
+quick commands to the specified addresses; it will respond to the other
+commands (also to the specified addresses) by reading from or writing to
+arrays in memory.  It will also spam the kernel logs for every command it
+handles.
 
 A pointer register with auto-increment is implemented for all byte
 operations.  This allows for continuous byte reads like those supported by
@@ -26,8 +27,8 @@ The typical use-case is like this:
 
 PARAMETERS:
 
-int chip_addr:
-       The SMBus address to emulate a chip at.
+int chip_addr[10]:
+       The SMBus addresses to emulate chips at.
 
 CAVEATS:
 
@@ -41,9 +42,6 @@ If the hardware for your driver has banked registers (e.g. Winbond sensors
 chips) this module will not work well - although it could be extended to
 support that pretty easily.
 
-Only one chip address is supported - although this module could be
-extended to support more.
-
 If you spam it hard enough, printk can be lossy.  This module really wants
 something like relayfs.
 
index a54adc50d162a5a580ae60a709b87bb802280c75..84df29da1ddc1c2f79d3dec90984ee343696f387 100644 (file)
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/i2c.h>
 
-static unsigned short chip_addr;
-module_param(chip_addr, ushort, S_IRUGO);
-MODULE_PARM_DESC(chip_addr, "Chip address (between 0x03 and 0x77)\n");
+#define MAX_CHIPS 10
 
-static u8  stub_pointer;
-static u8  stub_bytes[256];
-static u16 stub_words[256];
+static unsigned short chip_addr[MAX_CHIPS];
+module_param_array(chip_addr, ushort, NULL, S_IRUGO);
+MODULE_PARM_DESC(chip_addr,
+                "Chip addresses (up to 10, between 0x03 and 0x77)\n");
+
+struct stub_chip {
+       u8 pointer;
+       u8 bytes[256];
+       u16 words[256];
+};
+
+static struct stub_chip *stub_chips;
 
 /* Return -1 on error. */
 static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
        char read_write, u8 command, int size, union i2c_smbus_data * data)
 {
        s32 ret;
-
-       if (addr != chip_addr)
+       int i;
+       struct stub_chip *chip = NULL;
+
+       /* Search for the right chip */
+       for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
+               if (addr == chip_addr[i]) {
+                       chip = stub_chips + i;
+                       break;
+               }
+       }
+       if (!chip)
                return -ENODEV;
 
        switch (size) {
@@ -53,12 +70,12 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
 
        case I2C_SMBUS_BYTE:
                if (read_write == I2C_SMBUS_WRITE) {
-                       stub_pointer = command;
+                       chip->pointer = command;
                        dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
                                        "wrote 0x%02x.\n",
                                        addr, command);
                } else {
-                       data->byte = stub_bytes[stub_pointer++];
+                       data->byte = chip->bytes[chip->pointer++];
                        dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
                                        "read  0x%02x.\n",
                                        addr, data->byte);
@@ -69,29 +86,29 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
 
        case I2C_SMBUS_BYTE_DATA:
                if (read_write == I2C_SMBUS_WRITE) {
-                       stub_bytes[command] = data->byte;
+                       chip->bytes[command] = data->byte;
                        dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
                                        "wrote 0x%02x at 0x%02x.\n",
                                        addr, data->byte, command);
                } else {
-                       data->byte = stub_bytes[command];
+                       data->byte = chip->bytes[command];
                        dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
                                        "read  0x%02x at 0x%02x.\n",
                                        addr, data->byte, command);
                }
-               stub_pointer = command + 1;
+               chip->pointer = command + 1;
 
                ret = 0;
                break;
 
        case I2C_SMBUS_WORD_DATA:
                if (read_write == I2C_SMBUS_WRITE) {
-                       stub_words[command] = data->word;
+                       chip->words[command] = data->word;
                        dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
                                        "wrote 0x%04x at 0x%02x.\n",
                                        addr, data->word, command);
                } else {
-                       data->word = stub_words[command];
+                       data->word = chip->words[command];
                        dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
                                        "read  0x%04x at 0x%02x.\n",
                                        addr, data->word, command);
@@ -129,23 +146,41 @@ static struct i2c_adapter stub_adapter = {
 
 static int __init i2c_stub_init(void)
 {
-       if (!chip_addr) {
+       int i, ret;
+
+       if (!chip_addr[0]) {
                printk(KERN_ERR "i2c-stub: Please specify a chip address\n");
                return -ENODEV;
        }
-       if (chip_addr < 0x03 || chip_addr > 0x77) {
-               printk(KERN_ERR "i2c-stub: Invalid chip address 0x%02x\n",
-                      chip_addr);
-               return -EINVAL;
+
+       for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
+               if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) {
+                       printk(KERN_ERR "i2c-stub: Invalid chip address "
+                              "0x%02x\n", chip_addr[i]);
+                       return -EINVAL;
+               }
+
+               printk(KERN_INFO "i2c-stub: Virtual chip at 0x%02x\n",
+                      chip_addr[i]);
        }
 
-       printk(KERN_INFO "i2c-stub: Virtual chip at 0x%02x\n", chip_addr);
-       return i2c_add_adapter(&stub_adapter);
+       /* Allocate memory for all chips at once */
+       stub_chips = kzalloc(i * sizeof(struct stub_chip), GFP_KERNEL);
+       if (!stub_chips) {
+               printk(KERN_ERR "i2c-stub: Out of memory\n");
+               return -ENOMEM;
+       }
+
+       ret = i2c_add_adapter(&stub_adapter);
+       if (ret)
+               kfree(stub_chips);
+       return ret;
 }
 
 static void __exit i2c_stub_exit(void)
 {
        i2c_del_adapter(&stub_adapter);
+       kfree(stub_chips);
 }
 
 MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");