#include <linux/pci.h>
#include <linux/init.h>
#include <linux/irq.h>
-
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
+#define FSG_PCI_MAX_DEV 3
+#define FSG_PCI_IRQ_LINES 3
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define FSG_PCI_INTA_PIN 6
+#define FSG_PCI_INTB_PIN 7
+#define FSG_PCI_INTC_PIN 5
+#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6
+#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7
+#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5
+
void __init fsg_pci_preinit(void)
{
set_irq_type(IRQ_FSG_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/io.h>
-
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/gpio.h>
+#define FSG_SDA_PIN 12
+#define FSG_SCL_PIN 13
+
+#define FSG_SB_GPIO 4 /* sync button */
+#define FSG_RB_GPIO 9 /* reset button */
+#define FSG_UB_GPIO 10 /* usb button */
+
static struct flash_platform_data fsg_flash_data = {
.map_name = "cfi_probe",
.width = 2,
+++ /dev/null
-/*
- * arch/arm/mach-ixp4xx/include/mach/fsg.h
- *
- * Freecom FSG-3 platform specific definitions
- *
- * Author: Rod Whitby <rod@whitby.id.au>
- * Author: Tomasz Chmielewski <mangoo@wpkg.org>
- * Maintainers: http://www.nslu2-linux.org
- *
- * Based on coyote.h by
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#define FSG_SDA_PIN 12
-#define FSG_SCL_PIN 13
-
-/*
- * FSG PCI IRQs
- */
-#define FSG_PCI_MAX_DEV 3
-#define FSG_PCI_IRQ_LINES 3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define FSG_PCI_INTA_PIN 6
-#define FSG_PCI_INTB_PIN 7
-#define FSG_PCI_INTC_PIN 5
-
-/* Buttons */
-
-#define FSG_SB_GPIO 4 /* sync button */
-#define FSG_RB_GPIO 9 /* reset button */
-#define FSG_UB_GPIO 10 /* usb button */
-
-/* LEDs */
-
-#define FSG_LED_WLAN_BIT 0
-#define FSG_LED_WAN_BIT 1
-#define FSG_LED_SATA_BIT 2
-#define FSG_LED_USB_BIT 4
-#define FSG_LED_RING_BIT 5
-#define FSG_LED_SYNC_BIT 7
/* Platform specific details */
#include "prpmc1100.h"
-#include "fsg.h"
#endif /* _ASM_ARCH_HARDWARE_H */
#define IRQ_PRPMC1100_PCI_INTC IRQ_IXP4XX_GPIO9
#define IRQ_PRPMC1100_PCI_INTD IRQ_IXP4XX_GPIO8
-/*
- * Freecom FSG-3 Board IRQs
- */
-#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6
-#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7
-#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5
-
#endif
#include <mach/hardware.h>
#include <asm/io.h>
+#define FSG_LED_WLAN_BIT 0
+#define FSG_LED_WAN_BIT 1
+#define FSG_LED_SATA_BIT 2
+#define FSG_LED_USB_BIT 4
+#define FSG_LED_RING_BIT 5
+#define FSG_LED_SYNC_BIT 7
+
static short __iomem *latch_address;
static unsigned short latch_value;