[MMC] sdhci: fix timeout loops in sdhci
authorPierre Ossman <drzeus@drzeus.cx>
Fri, 30 Jun 2006 09:22:23 +0000 (02:22 -0700)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Sun, 2 Jul 2006 15:02:02 +0000 (16:02 +0100)
The current timeout loop assume that jiffies are updated.  This might not be
the case depending on locks and if the kernel is compiled without preemption.
Change the system to use a counter and fixed delays.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
drivers/mmc/sdhci.c

index 74912dcac82f498e736a8d5505acf0b6f595909c..007e825dcb9378e9ab5bd409add0f49fc550c866 100644 (file)
@@ -371,17 +371,17 @@ static void sdhci_finish_data(struct sdhci_host *host)
 static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 {
        int flags;
-       u32 present;
-       unsigned long max_jiffies;
+       unsigned long timeout;
 
        WARN_ON(host->cmd);
 
        DBG("Sending cmd (%x)\n", cmd->opcode);
 
        /* Wait max 10 ms */
-       max_jiffies = jiffies + (HZ + 99)/100;
-       do {
-               if (time_after(jiffies, max_jiffies)) {
+       timeout = 10;
+       while (readl(host->ioaddr + SDHCI_PRESENT_STATE) &
+               (SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT)) {
+               if (timeout == 0) {
                        printk(KERN_ERR "%s: Controller never released "
                                "inhibit bits. Please report this to "
                                BUGMAIL ".\n", mmc_hostname(host->mmc));
@@ -390,8 +390,9 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
                        tasklet_schedule(&host->finish_tasklet);
                        return;
                }
-               present = readl(host->ioaddr + SDHCI_PRESENT_STATE);
-       } while (present & (SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT));
+               timeout--;
+               mdelay(1);
+       }
 
        mod_timer(&host->timer, jiffies + 10 * HZ);
 
@@ -490,7 +491,7 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 {
        int div;
        u16 clk;
-       unsigned long max_jiffies;
+       unsigned long timeout;
 
        if (clock == host->clock)
                return;
@@ -511,17 +512,19 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
        writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);
 
        /* Wait max 10 ms */
-       max_jiffies = jiffies + (HZ + 99)/100;
-       do {
-               if (time_after(jiffies, max_jiffies)) {
+       timeout = 10;
+       while (!((clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL))
+               & SDHCI_CLOCK_INT_STABLE)) {
+               if (timeout == 0) {
                        printk(KERN_ERR "%s: Internal clock never stabilised. "
                                "Please report this to " BUGMAIL ".\n",
                                mmc_hostname(host->mmc));
                        sdhci_dumpregs(host);
                        return;
                }
-               clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL);
-       } while (!(clk & SDHCI_CLOCK_INT_STABLE));
+               timeout--;
+               mdelay(1);
+       }
 
        clk |= SDHCI_CLOCK_CARD_EN;
        writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);