*
* Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
-*/
+ */
/* Hote on 2410 error handling
*
* and change the policy on BREAK
*
* BJD, 04-Nov-2004
-*/
+ */
#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
/* if there isn't anything more to transmit, or the uart is now
* stopped, disable the uart and exit
- */
+ */
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
s3c24xx_serial_stop_tx(port);
ourport->tx_claimed = 1;
/* the port reset code should have done the correct
- * register setup for the port controls */
+ * register setup for the port controls
+ */
return ret;
* baud clocks (and the resultant actual baud rates) and then tries to
* pick the closest one and select that.
*
-*/
+ */
#define MAX_CLK_NAME_LENGTH 15
/* s3c24xx_serial_resetport
*
* reset the fifos and other the settings.
-*/
+ */
static void s3c24xx_serial_resetport(struct uart_port *port,
struct s3c2410_uartcfg *cfg)
if (val == CPUFREQ_PRECHANGE) {
/* we should really shut the port down whilst the
- * frequency change is in progress. */
+ * frequency change is in progress.
+ */
} else if (val == CPUFREQ_POSTCHANGE) {
struct ktermios *termios;