ARM: dts: Cygnus: Fix I2C controller interrupt type

Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom
Cygnus SoC.

Fixes: b51c05a331ff ("ARM: dts: add I2C device nodes for Broadcom Cygnus")
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 9fe4f5a6379e3b60d79a6ed8a0327f680434861e..835a6f736da43ac1743ab86d01a14169fb79e59a 100644 (file)
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -216,7 +216,7 @@
                        reg = <0x18008000 0x100>;
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+                       interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
                        clock-frequency = <100000>;
                        status = "disabled";
                };
@@ -245,7 +245,7 @@
                        reg = <0x1800b000 0x100>;
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+                       interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
                        clock-frequency = <100000>;
                        status = "disabled";
                };