usb: musb: tusb6010_omap: Do not reset the other direction's packet size
authorPeter Ujfalusi <peter.ujfalusi@ti.com>
Wed, 17 May 2017 16:23:11 +0000 (11:23 -0500)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Thu, 18 May 2017 13:21:17 +0000 (15:21 +0200)
We have one register for each EP to set the maximum packet size for both
TX and RX.
If for example an RX programming would happen before the previous TX
transfer finishes we would reset the TX packet side.

To fix this issue, only modify the TX or RX part of the register.

Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/musb/tusb6010_omap.c

index 8b43c4b99f045325fd5c7160ee28cca73f8738af..7870b37e0ea5c6b5a1767e9469193d791107071c 100644 (file)
@@ -219,6 +219,7 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
        u32                             dma_remaining;
        int                             src_burst, dst_burst;
        u16                             csr;
+       u32                             psize;
        int                             ch;
        s8                              dmareq;
        s8                              sync_dev;
@@ -390,15 +391,19 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
 
        if (chdat->tx) {
                /* Send transfer_packet_sz packets at a time */
-               musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
-                       chdat->transfer_packet_sz);
+               psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+               psize &= ~0x7ff;
+               psize |= chdat->transfer_packet_sz;
+               musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
 
                musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
                        TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
        } else {
                /* Receive transfer_packet_sz packets at a time */
-               musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
-                       chdat->transfer_packet_sz << 16);
+               psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+               psize &= ~(0x7ff << 16);
+               psize |= (chdat->transfer_packet_sz << 16);
+               musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
 
                musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
                        TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));