ARM: dts: kirkwood-linksys-viper: Utilize new DSA binding

Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa:
Document new binding"). The legacy binding node is kept included, but is marked
disabled.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
index 345fcac48dc7f8211de3dc6f07dac73f5e604e6e..df7851820507db0d84958db809a75aac2cc71611 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -70,6 +70,8 @@
        };
 
        dsa {
+               status = "disabled";
+
                compatible = "marvell,dsa";
                #address-cells = <2>;
                #size-cells = <0>;
@@ -207,6 +209,53 @@
 
 &mdio {
        status = "okay";
+
+       switch@10 {
+               compatible = "marvell,mv88e6085";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <16>;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               label = "ethernet1";
+                       };
+
+                       port@1 {
+                               reg = <1>;
+                               label = "ethernet2";
+                       };
+
+                       port@2 {
+                               reg = <2>;
+                               label = "ethernet3";
+                       };
+
+                       port@3 {
+                               reg = <3>;
+                               label = "ethernet4";
+                       };
+
+                       port@4 {
+                               reg = <4>;
+                               label = "internet";
+                       };
+
+                       port@5 {
+                               reg = <5>;
+                               label = "cpu";
+                               ethernet = <&eth0port>;
+                               fixed-link {
+                                       speed = <1000>;
+                                       full-duplex;
+                               };
+                       };
+               };
+       };
 };
 
 &uart0 {