[PATCH] x86_64: Check that early arguments are words on their own
authorAndi Kleen <ak@suse.de>
Sat, 25 Mar 2006 15:29:46 +0000 (16:29 +0100)
committerLinus Torvalds <torvalds@g5.osdl.org>
Sat, 25 Mar 2006 17:10:53 +0000 (09:10 -0800)
We've always had the problem that arguments only did a prefix match,
which resulted e.g.  in noapic and noapictimer getting confused.

Fix the early argument parsing code to always check that arguments are
whole words (except for those that take additional arguments of course)
I factored out the checking code for that while also makes the code
easier to maintain.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
arch/x86_64/kernel/setup.c

index 6ca07eaa26dbd641616bb0507ba6bca1b3dd90df..01e2de4d254026ff8089533aae9d46b6c6b372a3 100644 (file)
@@ -46,6 +46,7 @@
 #include <linux/cpufreq.h>
 #include <linux/dmi.h>
 #include <linux/dma-mapping.h>
+#include <linux/ctype.h>
 
 #include <asm/mtrr.h>
 #include <asm/uaccess.h>
@@ -270,6 +271,13 @@ static void __init probe_roms(void)
        }
 }
 
+/* Check for full argument with no trailing characters */
+static int fullarg(char *p, char *arg)
+{
+       int l = strlen(arg);
+       return !memcmp(p, arg, l) && (p[l] == 0 || isspace(p[l]));
+}
+
 static __init void parse_cmdline_early (char ** cmdline_p)
 {
        char c = ' ', *to = command_line, *from = COMMAND_LINE;
@@ -293,10 +301,10 @@ static __init void parse_cmdline_early (char ** cmdline_p)
 #endif
 #ifdef CONFIG_ACPI
                /* "acpi=off" disables both ACPI table parsing and interpreter init */
-               if (!memcmp(from, "acpi=off", 8))
+               if (fullarg(from,"acpi=off"))
                        disable_acpi();
 
-               if (!memcmp(from, "acpi=force", 10)) { 
+               if (fullarg(from, "acpi=force")) { 
                        /* add later when we do DMI horrors: */
                        acpi_force = 1;
                        acpi_disabled = 0;
@@ -304,52 +312,47 @@ static __init void parse_cmdline_early (char ** cmdline_p)
 
                /* acpi=ht just means: do ACPI MADT parsing 
                   at bootup, but don't enable the full ACPI interpreter */
-               if (!memcmp(from, "acpi=ht", 7)) { 
+               if (fullarg(from, "acpi=ht")) { 
                        if (!acpi_force)
                                disable_acpi();
                        acpi_ht = 1; 
                }
-                else if (!memcmp(from, "pci=noacpi", 10)) 
+                else if (fullarg(from, "pci=noacpi")) 
                        acpi_disable_pci();
-               else if (!memcmp(from, "acpi=noirq", 10))
+               else if (fullarg(from, "acpi=noirq"))
                        acpi_noirq_set();
 
-               else if (!memcmp(from, "acpi_sci=edge", 13))
+               else if (fullarg(from, "acpi_sci=edge"))
                        acpi_sci_flags.trigger =  1;
-               else if (!memcmp(from, "acpi_sci=level", 14))
+               else if (fullarg(from, "acpi_sci=level"))
                        acpi_sci_flags.trigger = 3;
-               else if (!memcmp(from, "acpi_sci=high", 13))
+               else if (fullarg(from, "acpi_sci=high"))
                        acpi_sci_flags.polarity = 1;
-               else if (!memcmp(from, "acpi_sci=low", 12))
+               else if (fullarg(from, "acpi_sci=low"))
                        acpi_sci_flags.polarity = 3;
 
                /* acpi=strict disables out-of-spec workarounds */
-               else if (!memcmp(from, "acpi=strict", 11)) {
+               else if (fullarg(from, "acpi=strict")) {
                        acpi_strict = 1;
                }
 #ifdef CONFIG_X86_IO_APIC
-               else if (!memcmp(from, "acpi_skip_timer_override", 24))
+               else if (fullarg(from, "acpi_skip_timer_override"))
                        acpi_skip_timer_override = 1;
 #endif
 #endif
 
-               if (!memcmp(from, "disable_timer_pin_1", 19))
+               if (fullarg(from, "disable_timer_pin_1"))
                        disable_timer_pin_1 = 1;
-               if (!memcmp(from, "enable_timer_pin_1", 18))
+               if (fullarg(from, "enable_timer_pin_1"))
                        disable_timer_pin_1 = -1;
 
-               if (!memcmp(from, "nolapic", 7) ||
-                   !memcmp(from, "disableapic", 11))
+               if (fullarg(from, "nolapic") || fullarg(from, "disableapic"))
                        disable_apic = 1;
 
-               /* Don't confuse with noapictimer */
-               if (!memcmp(from, "noapic", 6) &&
-                       (from[6] == ' ' || from[6] == 0))
+               if (fullarg(from, "noapic"))
                        skip_ioapic_setup = 1;
 
-               /* Make sure to not confuse with apic= */
-               if (!memcmp(from, "apic", 4) &&
-                       (from[4] == ' ' || from[4] == 0)) {
+               if (fullarg(from,"apic")) {
                        skip_ioapic_setup = 0;
                        ioapic_force = 1;
                }
@@ -388,7 +391,7 @@ static __init void parse_cmdline_early (char ** cmdline_p)
                        iommu_setup(from+6); 
                }
 
-               if (!memcmp(from,"oops=panic", 10))
+               if (fullarg(from,"oops=panic"))
                        panic_on_oops = 1;
 
                if (!memcmp(from, "noexec=", 7))