select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select HAVE_SCHED_CLOCK
help
Support for Freescale MXC/iMX-based family of processors
bool "Vista Silicon i.MX27 Visstrim_m10"
select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_EHCI
#include <mach/mx25.h>
#include <mach/imx-uart.h>
#include <mach/audmux.h>
+#include <mach/esdhc.h>
#include "devices-imx25.h"
.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
};
+static struct esdhc_platform_data sd1_pdata = {
+ .cd_gpio = GPIO_SD1CD,
+ .wp_gpio = -EINVAL,
+};
+
/*
* system init for baseboard usage. Will be called by cpuimx25 init.
*
imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
imx25_add_flexcan1(NULL);
- imx25_add_sdhci_esdhc_imx(0, NULL);
+ imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
gpio_request(GPIO_LED1, "LED1");
gpio_direction_output(GPIO_LED1, 1);
#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/audmux.h>
+#include <mach/esdhc.h>
#include "devices-imx35.h"
#include "devices.h"
MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+ /* SD1 CD */
+ MX35_PAD_LD18__GPIO3_24,
};
#define GPIO_LED1 IMX_GPIO_NR(3, 29)
#define GPIO_SWITCH1 IMX_GPIO_NR(3, 25)
-#define GPIO_LCDPWR (4)
+#define GPIO_LCDPWR IMX_GPIO_NR(1, 4)
+#define GPIO_SD1CD IMX_GPIO_NR(3, 24)
static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
unsigned int power)
.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
};
+static struct esdhc_platform_data sd1_pdata = {
+ .cd_gpio = GPIO_SD1CD,
+ .wp_gpio = -EINVAL,
+};
+
/*
* system init for baseboard usage. Will be called by cpuimx35 init.
*
imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
imx35_add_flexcan1(NULL);
- imx35_add_sdhci_esdhc_imx(0, NULL);
+ imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
gpio_request(GPIO_LED1, "LED1");
gpio_direction_output(GPIO_LED1, 1);
gpio_request(GPIO_LCDPWR, "LCDPWR");
gpio_direction_output(GPIO_LCDPWR, 1);
- gpio_free(GPIO_LCDPWR);
i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
#include <mach/mx3fb.h>
#include <mach/ulpi.h>
#include <mach/audmux.h>
+#include <mach/esdhc.h>
#include "devices-imx35.h"
#include "devices.h"
MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+ MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
+ MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */
};
#define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31)
#define AC97_GPIO_TXD IMX_GPIO_NR(2, 28)
#define AC97_GPIO_RESET IMX_GPIO_NR(2, 0)
+#define SD1_GPIO_WP IMX_GPIO_NR(2, 23)
+#define SD1_GPIO_CD IMX_GPIO_NR(2, 24)
static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
{
}
__setup("otg_mode=", pcm043_otg_mode);
+static struct esdhc_platform_data sd1_pdata = {
+ .wp_gpio = SD1_GPIO_WP,
+ .cd_gpio = SD1_GPIO_CD,
+};
+
/*
* Board specific initialization.
*/
imx35_add_fsl_usb2_udc(&otg_device_pdata);
imx35_add_flexcan1(NULL);
- imx35_add_sdhci_esdhc_imx(0, NULL);
+ imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
}
static void __init pcm043_timer_init(void)
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
help
Include support for MX53 LOCO platform. This includes specific
configurations for the board and its peripherals.
#
# Object file lists.
-obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o
+obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
int ret;
/* reset FEC PHY */
- ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset");
+ ret = gpio_request_one(BABBAGE_FEC_PHY_RESET,
+ GPIOF_OUT_INIT_LOW, "fec-phy-reset");
if (ret) {
printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
return;
}
- gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0);
- gpio_set_value(BABBAGE_FEC_PHY_RESET, 0);
msleep(1);
gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
}
#include <mach/imx-uart.h>
#include <mach/iomux-mx53.h>
-#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
+#define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6)
#define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30)
#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19)
int ret;
/* reset FEC PHY */
- ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
+ ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
+ "fec-phy-reset");
if (ret) {
printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
return;
}
- gpio_direction_output(SMD_FEC_PHY_RST, 0);
- gpio_set_value(SMD_FEC_PHY_RST, 0);
msleep(1);
- gpio_set_value(SMD_FEC_PHY_RST, 1);
+ gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
}
static struct fec_platform_data mx53_evk_fec_pdata = {
#include "crm_regs.h"
#include "devices-imx53.h"
+#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8)
+#define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14)
+#define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15)
#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6)
static iomux_v3_cfg_t mx53_loco_pads[] = {
MX53_PAD_GPIO_8__GPIO1_8,
};
+#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
+{ \
+ .gpio = gpio_num, \
+ .type = EV_KEY, \
+ .code = ev_code, \
+ .active_low = act_low, \
+ .desc = "btn " descr, \
+ .wakeup = wake, \
+}
+
+static const struct gpio_keys_button loco_buttons[] __initconst = {
+ GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
+ GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
+ GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
+};
+
+static const struct gpio_keys_platform_data loco_button_data __initconst = {
+ .buttons = loco_buttons,
+ .nbuttons = ARRAY_SIZE(loco_buttons),
+};
+
static inline void mx53_loco_fec_reset(void)
{
int ret;
imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
imx53_add_sdhci_esdhc_imx(0, NULL);
imx53_add_sdhci_esdhc_imx(2, NULL);
+ imx_add_gpio_keys(&loco_button_data);
}
static void __init mx53_loco_timer_init(void)
.disable = _clk_ccgr_disable_inwait,
};
+static struct clk gpc_dvfs_clk = {
+ .enable_reg = MXC_CCM_CCGR5,
+ .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
+ .enable = _clk_ccgr_enable,
+ .disable = _clk_ccgr_disable,
+};
+
static struct clk gpt_32k_clk = {
.id = 0,
.parent = &ckil_clk,
_REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk)
_REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
_REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
+ _REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk)
};
static struct clk_lookup mx53_lookups[] = {
clk_enable(&iim_clk);
mx51_revision();
clk_disable(&iim_clk);
+ mx51_display_revision();
/* move usb_phy_clk to 24MHz */
clk_set_parent(&usb_phy1_clk, &osc_clk);
static int cpu_silicon_rev = -1;
#define IIM_SREV 0x24
+#define MX50_HW_ADADIG_DIGPROG 0xB0
static int get_mx51_srev(void)
{
}
EXPORT_SYMBOL(mx51_revision);
+void mx51_display_revision(void)
+{
+ int rev;
+ char *srev;
+ rev = mx51_revision();
+
+ switch (rev) {
+ case IMX_CHIP_REVISION_2_0:
+ srev = IMX_CHIP_REVISION_2_0_STRING;
+ break;
+ case IMX_CHIP_REVISION_3_0:
+ srev = IMX_CHIP_REVISION_3_0_STRING;
+ break;
+ default:
+ srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
+ }
+ printk(KERN_INFO "CPU identified as i.MX51, silicon rev %s\n", srev);
+}
+EXPORT_SYMBOL(mx51_display_revision);
+
#ifdef CONFIG_NEON
/*
}
EXPORT_SYMBOL(mx53_revision);
+static int get_mx50_srev(void)
+{
+ void __iomem *anatop = ioremap(MX50_ANATOP_BASE_ADDR, SZ_8K);
+ u32 rev;
+
+ if (!anatop) {
+ cpu_silicon_rev = -EINVAL;
+ return 0;
+ }
+
+ rev = readl(anatop + MX50_HW_ADADIG_DIGPROG);
+ rev &= 0xff;
+
+ iounmap(anatop);
+ if (rev == 0x0)
+ return IMX_CHIP_REVISION_1_0;
+ else if (rev == 0x1)
+ return IMX_CHIP_REVISION_1_1;
+ return 0;
+}
+
+/*
+ * Returns:
+ * the silicon revision of the cpu
+ * -EINVAL - not a mx50
+ */
+int mx50_revision(void)
+{
+ if (!cpu_is_mx50())
+ return -EINVAL;
+
+ if (cpu_silicon_rev == -1)
+ cpu_silicon_rev = get_mx50_srev();
+
+ return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx50_revision);
+
static int __init post_cpu_init(void)
{
unsigned int reg;
MX51_PAD_SD1_DATA1__SD1_DATA1,
MX51_PAD_SD1_DATA2__SD1_DATA2,
MX51_PAD_SD1_DATA3__SD1_DATA3,
+ /* SD1 CD */
+ _MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+ PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
};
#define GPIO_LED1 IMX_GPIO_NR(3, 30)
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <asm/mach-types.h>
#include "devices-imx51.h"
#include "devices.h"
static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
.flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR,
- .num_regulators = ARRAY_SIZE(mx51_efika_regulators),
- .regulators = mx51_efika_regulators,
+ .regulators = {
+ .num_regulators = ARRAY_SIZE(mx51_efika_regulators),
+ .regulators = mx51_efika_regulators,
+ },
};
static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
--- /dev/null
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include "crm_regs.h"
+
+/* set cpu low power mode before WFI instruction. This function is called
+ * mx5 because it can be used for mx50, mx51, and mx53.*/
+void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
+{
+ u32 plat_lpc, arm_srpgcr, ccm_clpcr;
+ u32 empgc0, empgc1;
+ int stop_mode = 0;
+
+ /* always allow platform to issue a deep sleep mode request */
+ plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
+ ~(MXC_CORTEXA8_PLAT_LPC_DSM);
+ ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
+ arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
+ empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
+ empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
+
+ switch (mode) {
+ case WAIT_CLOCKED:
+ break;
+ case WAIT_UNCLOCKED:
+ ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
+ break;
+ case WAIT_UNCLOCKED_POWER_OFF:
+ case STOP_POWER_OFF:
+ plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM
+ | MXC_CORTEXA8_PLAT_LPC_DBG_DSM;
+ if (mode == WAIT_UNCLOCKED_POWER_OFF) {
+ ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
+ ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY;
+ ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS;
+ stop_mode = 0;
+ } else {
+ ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
+ ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET;
+ ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
+ ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
+ stop_mode = 1;
+ }
+ arm_srpgcr |= MXC_SRPGCR_PCR;
+
+ if (tzic_enable_wake(1) != 0)
+ return;
+ break;
+ case STOP_POWER_ON:
+ ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
+ break;
+ default:
+ printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
+ return;
+ }
+
+ __raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
+ __raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
+ __raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
+
+ /* Enable NEON SRPG for all but MX50TO1.0. */
+ if (mx50_revision() != IMX_CHIP_REVISION_1_0)
+ __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
+
+ if (stop_mode) {
+ empgc0 |= MXC_SRPGCR_PCR;
+ empgc1 |= MXC_SRPGCR_PCR;
+
+ __raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
+ }
+}
select SOC_IMX23
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
+ select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
default y
help
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_FEC
select MXS_HAVE_PLATFORM_FLEXCAN
+ select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
select MXS_OCOTP
default y
__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
+ /*
+ * 480 MHz seems too high to be ssp clock source directly,
+ * so set frac to get a 288 MHz ref_io.
+ */
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+ reg &= ~BM_CLKCTRL_FRAC_IOFRAC;
+ reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+
return 0;
}
{
clk_misc_init();
+ /*
+ * source ssp clock from ref_io than ref_xtal,
+ * as ref_xtal only provides 24 MHz as maximum.
+ */
+ clk_set_parent(&ssp_clk, &ref_io_clk);
+
clk_enable(&cpu_clk);
clk_enable(&hbus_clk);
clk_enable(&xbus_clk);
_REGISTER_CLOCK("pll2", NULL, pll2_clk)
_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
+ _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk)
+ _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk)
_REGISTER_CLOCK("flexcan.0", NULL, can0_clk)
_REGISTER_CLOCK("flexcan.1", NULL, can1_clk)
_REGISTER_CLOCK(NULL, "usb0", usb0_clk)
reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ /*
+ * 480 MHz seems too high to be ssp clock source directly,
+ * so set frac0 to get a 288 MHz ref_io0.
+ */
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
+ reg &= ~BM_CLKCTRL_FRAC0_IO0FRAC;
+ reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
+
return 0;
}
{
clk_misc_init();
+ /*
+ * source ssp clock from ref_io0 than ref_xtal,
+ * as ref_xtal only provides 24 MHz as maximum.
+ */
+ clk_set_parent(&ssp0_clk, &ref_io0_clk);
+ clk_set_parent(&ssp1_clk, &ref_io0_clk);
+
clk_enable(&cpu_clk);
clk_enable(&hbus_clk);
clk_enable(&xbus_clk);
#define mx23_add_auart0() mx23_add_auart(0)
#define mx23_add_auart1() mx23_add_auart(1)
+extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
+#define mx23_add_mxs_mmc(id, pdata) \
+ mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
+
#define mx23_add_mxs_pwm(id) mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id)
struct platform_device *__init mx23_add_mxsfb(
extern const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
#define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
+extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
+#define mx28_add_mxs_mmc(id, pdata) \
+ mxs_add_mxs_mmc(&mx28_mxs_mmc_data[id], pdata)
+
#define mx28_add_mxs_pwm(id) mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
struct platform_device *__init mx28_add_mxsfb(
config MXS_HAVE_PLATFORM_MXS_I2C
bool
+config MXS_HAVE_PLATFORM_MXS_MMC
+ bool
+
config MXS_HAVE_PLATFORM_MXS_PWM
bool
obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
--- /dev/null
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_mxs_mmc_data_entry_single(soc, _id, hwid) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _SSP ## hwid ## _BASE_ADDR, \
+ .dma = soc ## _DMA_SSP ## hwid, \
+ .irq_err = soc ## _INT_SSP ## hwid ## _ERROR, \
+ .irq_dma = soc ## _INT_SSP ## hwid ## _DMA, \
+ }
+
+#define mxs_mxs_mmc_data_entry(soc, _id, hwid) \
+ [_id] = mxs_mxs_mmc_data_entry_single(soc, _id, hwid)
+
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = {
+ mxs_mxs_mmc_data_entry(MX23, 0, 1),
+ mxs_mxs_mmc_data_entry(MX23, 1, 2),
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = {
+ mxs_mxs_mmc_data_entry(MX28, 0, 0),
+ mxs_mxs_mmc_data_entry(MX28, 1, 1),
+};
+#endif
+
+struct platform_device *__init mxs_add_mxs_mmc(
+ const struct mxs_mxs_mmc_data *data,
+ const struct mxs_mmc_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->dma,
+ .end = data->dma,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = data->irq_err,
+ .end = data->irq_err,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->irq_dma,
+ .end = data->irq_dma,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return mxs_add_platform_device("mxs-mmc", data->id,
+ res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
};
struct platform_device * __init mxs_add_mxs_i2c(const struct mxs_i2c_data *data);
+/* mmc */
+#include <mach/mmc.h>
+struct mxs_mxs_mmc_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t dma;
+ resource_size_t irq_err;
+ resource_size_t irq_dma;
+};
+struct platform_device *__init mxs_add_mxs_mmc(
+ const struct mxs_mxs_mmc_data *data,
+ const struct mxs_mmc_platform_data *pdata);
+
/* pwm */
struct platform_device *__init mxs_add_mxs_pwm(
resource_size_t iobase, int id);
#define MX23EVK_LCD_ENABLE MXS_GPIO_NR(1, 18)
#define MX23EVK_BL_ENABLE MXS_GPIO_NR(1, 28)
+#define MX23EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30)
+#define MX23EVK_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29)
static const iomux_cfg_t mx23evk_pads[] __initconst = {
/* duart */
MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL,
/* backlight control */
MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL,
+
+ /* mmc */
+ MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_GPMI_D08__SSP1_DATA4 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_GPMI_D09__SSP1_DATA5 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_GPMI_D10__SSP1_DATA6 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_GPMI_D11__SSP1_DATA7 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_CMD__SSP1_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DETECT__SSP1_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX23_PAD_SSP1_SCK__SSP1_SCK |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* write protect */
+ MX23_PAD_PWM4__GPIO_1_30 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* slot power enable */
+ MX23_PAD_PWM3__GPIO_1_29 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
};
/* mxsfb (lcdif) */
.ld_intf_width = STMLCDIF_24BIT,
};
+static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = {
+ .wp_gpio = MX23EVK_MMC0_WRITE_PROTECT,
+ .flags = SLOTF_8_BIT_CAPABLE,
+};
+
static void __init mx23evk_init(void)
{
int ret;
mx23_add_duart();
mx23_add_auart0();
+ /* power on mmc slot by writing 0 to the gpio */
+ ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT,
+ "mmc0-slot-power");
+ if (ret)
+ pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
+ mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata);
+
ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
if (ret)
pr_warn("failed to request gpio lcd-enable: %d\n", ret);
#define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30)
#define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
+#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12)
+#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28)
+#define MX28EVK_MMC0_SLOT_POWER MXS_GPIO_NR(3, 28)
+#define MX28EVK_MMC1_SLOT_POWER MXS_GPIO_NR(3, 29)
+
static const iomux_cfg_t mx28evk_pads[] __initconst = {
/* duart */
MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL,
/* backlight control */
MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL,
+ /* mmc0 */
+ MX28_PAD_SSP0_DATA0__SSP0_D0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA1__SSP0_D1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA2__SSP0_D2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA3__SSP0_D3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA4__SSP0_D4 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA5__SSP0_D5 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA6__SSP0_D6 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA7__SSP0_D7 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_CMD__SSP0_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX28_PAD_SSP0_SCK__SSP0_SCK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* write protect */
+ MX28_PAD_SSP1_SCK__GPIO_2_12 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* slot power enable */
+ MX28_PAD_PWM3__GPIO_3_28 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+ /* mmc1 */
+ MX28_PAD_GPMI_D00__SSP1_D0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D01__SSP1_D1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D02__SSP1_D2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D03__SSP1_D3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D04__SSP1_D4 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D05__SSP1_D5 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D06__SSP1_D6 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D07__SSP1_D7 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RDY1__SSP1_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_WRN__SSP1_SCK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* write protect */
+ MX28_PAD_GPMI_RESETN__GPIO_0_28 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* slot power enable */
+ MX28_PAD_PWM4__GPIO_3_29 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
};
/* fec */
.ld_intf_width = STMLCDIF_24BIT,
};
+static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
+ {
+ /* mmc0 */
+ .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
+ .flags = SLOTF_8_BIT_CAPABLE,
+ }, {
+ /* mmc1 */
+ .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
+ .flags = SLOTF_8_BIT_CAPABLE,
+ },
+};
+
static void __init mx28evk_init(void)
{
int ret;
gpio_set_value(MX28EVK_BL_ENABLE, 1);
mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
+
+ /* power on mmc slot by writing 0 to the gpio */
+ ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT,
+ "mmc0-slot-power");
+ if (ret)
+ pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
+ mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
+
+ ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_DIR_OUT,
+ "mmc1-slot-power");
+ if (ret)
+ pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
+ mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
}
static void __init mx28evk_timer_init(void)
};
#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
-static const iomux_cfg_t tx28_fec_pads[] __initconst = {
+static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
};
-static const struct fec_platform_data tx28_fec_data __initconst = {
+static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
+ MX28_PAD_ENET0_RXD2__ENET1_RXD0,
+ MX28_PAD_ENET0_RXD3__ENET1_RXD1,
+ MX28_PAD_ENET0_TXD2__ENET1_TXD0,
+ MX28_PAD_ENET0_TXD3__ENET1_TXD1,
+ MX28_PAD_ENET0_COL__ENET1_TX_EN,
+ MX28_PAD_ENET0_CRS__ENET1_RX_EN,
+};
+
+static struct fec_platform_data tx28_fec0_data = {
+ .phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static struct fec_platform_data tx28_fec1_data = {
.phy = PHY_INTERFACE_MODE_RMII,
};
pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
gpio_set_value(TX28_FEC_PHY_RESET, 1);
- ret = mxs_iomux_setup_multiple_pads(tx28_fec_pads,
- ARRAY_SIZE(tx28_fec_pads));
+ ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
+ ARRAY_SIZE(tx28_fec0_pads));
if (ret) {
pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
__func__, ret);
goto free_gpios;
}
- pr_debug("%s: Registering FEC device\n", __func__);
- mx28_add_fec(0, &tx28_fec_data);
+ pr_debug("%s: Registering FEC0 device\n", __func__);
+ mx28_add_fec(0, &tx28_fec0_data);
return 0;
free_gpios:
return ret;
}
+
+int __init tx28_add_fec1(void)
+{
+ int ret;
+
+ ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
+ ARRAY_SIZE(tx28_fec1_pads));
+ if (ret) {
+ pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
+ __func__, ret);
+ return ret;
+ }
+ pr_debug("%s: Registering FEC1 device\n", __func__);
+ mx28_add_fec(1, &tx28_fec1_data);
+ return 0;
+}
* Free Software Foundation.
*/
int __init tx28_add_fec0(void);
+int __init tx28_add_fec1(void);
struct resource res[] = {
{
.start = data->iobase,
- .end = data->iobase + SZ_4K,
+ .end = data->iobase + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
struct resource res[] = {
{
.start = data->iobase,
- .end = data->iobase + SZ_16K,
+ .end = data->iobase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
#define MX31_AUDMUX_PORT5_SSI_PINS_5 4
#define MX31_AUDMUX_PORT6_SSI_PINS_6 5
+#define MX51_AUDMUX_PORT1_SSI0 0
+#define MX51_AUDMUX_PORT2_SSI1 1
+#define MX51_AUDMUX_PORT3 2
+#define MX51_AUDMUX_PORT4 3
+#define MX51_AUDMUX_PORT5 4
+#define MX51_AUDMUX_PORT6 5
+#define MX51_AUDMUX_PORT7 6
+
/* Register definitions for the i.MX21/27 Digital Audio Multiplexer */
#define MXC_AUDMUX_V1_PCR_INMMASK(x) ((x) & 0xff)
#define MXC_AUDMUX_V1_PCR_INMEN (1 << 8)
#define MXC_AUDMUX_V1_PCR_TCLKDIR (1 << 30)
#define MXC_AUDMUX_V1_PCR_TFSDIR (1 << 31)
-/* Register definitions for the i.MX25/31/35 Digital Audio Multiplexer */
+/* Register definitions for the i.MX25/31/35/51 Digital Audio Multiplexer */
#define MXC_AUDMUX_V2_PTCR_TFSDIR (1 << 31)
#define MXC_AUDMUX_V2_PTCR_TFSEL(x) (((x) & 0xf) << 27)
#define MXC_AUDMUX_V2_PTCR_TCLKDIR (1 << 26)
#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | 19)
-#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | 20)
-#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | 21)
-#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | 22)
-#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | 23)
-#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | 24)
+#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
+#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
+#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
+#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
+#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 23)
+#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
#define MX50_INT_APBHDMA_CHAN6 116
#define MX50_INT_APBHDMA_CHAN7 117
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+extern int mx50_revision(void);
+#endif
+
#endif /* ifndef __MACH_MX50_H__ */
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
extern int mx51_revision(void);
+extern void mx51_display_revision(void);
#endif
/* tape-out 1 defines */
#define IMX_CHIP_REVISION_3_3 0x33
#define IMX_CHIP_REVISION_UNKNOWN 0xff
+#define IMX_CHIP_REVISION_1_0_STRING "1.0"
+#define IMX_CHIP_REVISION_1_1_STRING "1.1"
+#define IMX_CHIP_REVISION_1_2_STRING "1.2"
+#define IMX_CHIP_REVISION_1_3_STRING "1.3"
+#define IMX_CHIP_REVISION_2_0_STRING "2.0"
+#define IMX_CHIP_REVISION_2_1_STRING "2.1"
+#define IMX_CHIP_REVISION_2_2_STRING "2.2"
+#define IMX_CHIP_REVISION_2_3_STRING "2.3"
+#define IMX_CHIP_REVISION_3_0_STRING "3.0"
+#define IMX_CHIP_REVISION_3_1_STRING "3.1"
+#define IMX_CHIP_REVISION_3_2_STRING "3.2"
+#define IMX_CHIP_REVISION_3_3_STRING "3.3"
+#define IMX_CHIP_REVISION_UNKNOWN_STRING "unknown"
+
#ifndef __ASSEMBLY__
extern unsigned int __mxc_cpu_type;
#endif
u32 cpu_rate;
};
+int tzic_enable_wake(int is_idle);
+enum mxc_cpu_pwr_mode {
+ WAIT_CLOCKED, /* wfi only */
+ WAIT_UNCLOCKED, /* WAIT */
+ WAIT_UNCLOCKED_POWER_OFF, /* WAIT + SRPG */
+ STOP_POWER_ON, /* just STOP */
+ STOP_POWER_OFF, /* STOP + SRPG */
+};
+
extern struct cpu_op *(*get_cpu_op)(int *op);
#endif
#include <mach/hardware.h>
#include <mach/common.h>
+extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+
static inline void arch_idle(void)
{
#ifdef CONFIG_ARCH_MXC91231
"orr %0, %0, #0x00000004\n"
"mcr p15, 0, %0, c1, c0, 0\n"
: "=r" (reg));
- } else
+ } else if (cpu_is_mx51())
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ else
cpu_do_idle();
}
#include <linux/clk.h>
#include <mach/hardware.h>
+#include <asm/sched_clock.h>
#include <asm/mach/time.h>
#include <mach/common.h>
__raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT);
}
+static cycle_t dummy_get_cycles(struct clocksource *cs)
+{
+ return 0;
+}
+
static cycle_t mx1_2_get_cycles(struct clocksource *cs)
{
return __raw_readl(timer_base + MX1_2_TCN);
static struct clocksource clocksource_mxc = {
.name = "mxc_timer1",
.rating = 200,
- .read = mx1_2_get_cycles,
+ .read = dummy_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+static DEFINE_CLOCK_DATA(cd);
+unsigned long long notrace sched_clock(void)
+{
+ cycle_t cyc = clocksource_mxc.read(&clocksource_mxc);
+
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace mxc_update_sched_clock(void)
+{
+ cycle_t cyc = clocksource_mxc.read(&clocksource_mxc);
+ update_sched_clock(&cd, cyc, (u32)~0);
+}
+
static int __init mxc_clocksource_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
if (timer_is_v2())
clocksource_mxc.read = v2_get_cycles;
+ else
+ clocksource_mxc.read = mx1_2_get_cycles;
+ init_sched_clock(&cd, mxc_update_sched_clock, 32, c);
clocksource_register_hz(&clocksource_mxc, c);
return 0;
git.samba.org / sfrench / cifs-2.6.git / commitdiff