atl1c: disable L1/L0s when link detected
authorJie Yang <jie.yang@atheros.com>
Mon, 27 Apr 2009 19:42:03 +0000 (19:42 +0000)
committerDavid S. Miller <davem@davemloft.net>
Tue, 28 Apr 2009 08:53:10 +0000 (01:53 -0700)
Disable L1/L0s when link detected. We enable L1/L0s when link connected
before, but there is some hareware error on some platform. So just diable
this feature when link connected. This feature is about power saving.

Signed-off-by: Jie Yang <jie.yang@atheros.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/atl1c/atl1c_main.c

index deb7b53167ee0bfd6448ccd416928a4d9b355a08..8b17278c4a58ed41523c191c483b3214a6c40c51 100644 (file)
@@ -220,11 +220,11 @@ static void atl1c_check_link_status(struct atl1c_adapter *adapter)
                /* link down */
                if (netif_carrier_ok(netdev)) {
                        hw->hibernate = true;
-                       atl1c_set_aspm(hw, false);
                        if (atl1c_stop_mac(hw) != 0)
                                if (netif_msg_hw(adapter))
                                        dev_warn(&pdev->dev,
                                                "stop mac failed\n");
+                       atl1c_set_aspm(hw, false);
                }
                netif_carrier_off(netdev);
        } else {
@@ -240,10 +240,10 @@ static void atl1c_check_link_status(struct atl1c_adapter *adapter)
                    adapter->link_duplex != duplex) {
                        adapter->link_speed  = speed;
                        adapter->link_duplex = duplex;
+                       atl1c_set_aspm(hw, true);
                        atl1c_enable_tx_ctrl(hw);
                        atl1c_enable_rx_ctrl(hw);
                        atl1c_setup_mac_ctrl(adapter);
-                       atl1c_set_aspm(hw, true);
                        if (netif_msg_link(adapter))
                                dev_info(&pdev->dev,
                                        "%s: %s NIC Link is Up<%d Mbps %s>\n",
@@ -1242,9 +1242,7 @@ static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup)
 
        AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data);
 
-       pm_ctrl_data &= PM_CTRL_SERDES_PD_EX_L1;
-       pm_ctrl_data |= ~PM_CTRL_SERDES_BUDS_RX_L1_EN;
-       pm_ctrl_data |= ~PM_CTRL_SERDES_L1_EN;
+       pm_ctrl_data &= ~PM_CTRL_SERDES_PD_EX_L1;
        pm_ctrl_data &=  ~(PM_CTRL_L1_ENTRY_TIMER_MASK <<
                        PM_CTRL_L1_ENTRY_TIMER_SHIFT);
 
@@ -1254,19 +1252,11 @@ static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup)
                pm_ctrl_data |= PM_CTRL_SERDES_PLL_L1_EN;
                pm_ctrl_data &= ~PM_CTRL_CLK_SWH_L1;
 
-               if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT) {
-                       pm_ctrl_data |= AT_ASPM_L1_TIMER <<
-                               PM_CTRL_L1_ENTRY_TIMER_SHIFT;
-                       pm_ctrl_data |= PM_CTRL_ASPM_L1_EN;
-               } else
-                       pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN;
-
-               if (hw->ctrl_flags & ATL1C_ASPM_L0S_SUPPORT)
-                       pm_ctrl_data |= PM_CTRL_ASPM_L0S_EN;
-               else
-                       pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN;
-
+               pm_ctrl_data |= PM_CTRL_SERDES_BUDS_RX_L1_EN;
+               pm_ctrl_data |= PM_CTRL_SERDES_L1_EN;
        } else {
+               pm_ctrl_data &= ~PM_CTRL_SERDES_BUDS_RX_L1_EN;
+               pm_ctrl_data &= ~PM_CTRL_SERDES_L1_EN;
                pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN;
                pm_ctrl_data &= ~PM_CTRL_SERDES_PLL_L1_EN;