ARM: davinci: board-da830-evm: fix GPIO lookup for MMC/SD

The GPIO chip is called davinci_gpio.0 in legacy mode. Fix it, so that
mmc can correctly lookup the wp and cp gpios. Also fix the GPIO numbers
as they are not offsets within a bank.

Note that it is the gpio-davinci driver that sets the gpiochip label to
davinci_gpio.0.

Fixes: b5e1438cf98a ("ARM: davinci: da830-evm: use gpio descriptor for mmc pins")
Reported-by: David Lechner <david@lechnology.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 004f9c8de0329cacdb25bfc7c7819a528a78fe77..d1e8ce7b4bd21245d41901709041c113f95f344d 100644 (file)
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -205,12 +205,17 @@ static const short da830_evm_mmc_sd_pins[] = {
        -1
 };
 
+#define DA830_MMCSD_WP_PIN             GPIO_TO_PIN(2, 1)
+#define DA830_MMCSD_CD_PIN             GPIO_TO_PIN(2, 2)
+
 static struct gpiod_lookup_table mmc_gpios_table = {
        .dev_id = "da830-mmc.0",
        .table = {
                /* gpio chip 1 contains gpio range 32-63 */
-               GPIO_LOOKUP("davinci_gpio.1", 2, "cd", GPIO_ACTIVE_LOW),
-               GPIO_LOOKUP("davinci_gpio.1", 1, "wp", GPIO_ACTIVE_LOW),
+               GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_CD_PIN, "cd",
+                           GPIO_ACTIVE_LOW),
+               GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_WP_PIN, "wp",
+                           GPIO_ACTIVE_LOW),
        },
 };