lk201: remove obsolete driver
authorMaciej W. Rozycki <macro@linux-mips.org>
Wed, 17 Oct 2007 06:29:51 +0000 (23:29 -0700)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Wed, 17 Oct 2007 15:42:57 +0000 (08:42 -0700)
Remove the old-fashioned lk201 driver under drivers/tc/ that used to be
used by the old dz.c and zs.c drivers, which is now orphan code referred to
from nowhere and does not build anymore.  A modern replacement is available
as drivers/input/keyboard/lkkbd.c.

There are no plans to do anything about this piece of code and it does not
fit anywhere anymore, so it is not just a matter of maintenance or the lack
of.  There are still some bits that might be added to the new lkkbd.c
driver based on the old code, and the embedded hardware documentation which
is otherwise quite hard to get hold of might be useful to keep too.  Both
of these can be done separately though.  RIP.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Documentation/dontdiff
arch/mips/Makefile
drivers/tc/.gitignore [deleted file]
drivers/tc/Makefile
drivers/tc/lk201-map.c_shipped [deleted file]
drivers/tc/lk201-map.map [deleted file]
drivers/tc/lk201-remap.c [deleted file]
drivers/tc/lk201.c [deleted file]
drivers/tc/lk201.h [deleted file]

index 7b9551fc6fe3ffdea3523b1571da44748059d312..1380324253274149a9a08dc483490bf46775fe79 100644 (file)
@@ -121,7 +121,6 @@ kxgettext
 lkc_defs.h
 lex.c*
 lex.*.c
-lk201-map.c
 logo_*.c
 logo_*_clut224.c
 logo_*_mono.c
index 6b663bec4752af5c8102c97fc2b8316e17bb9f02..14164c2b8791f00f13ae22b5c74e7b750ba7df11 100644 (file)
@@ -279,7 +279,6 @@ core-$(CONFIG_MACH_DECSTATION)      += arch/mips/dec/
 cflags-$(CONFIG_MACH_DECSTATION)+= -Iinclude/asm-mips/mach-dec
 libs-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/prom/
 load-$(CONFIG_MACH_DECSTATION) += 0xffffffff80040000
-CLEAN_FILES                    += drivers/tc/lk201-map.c
 
 #
 # Wind River PPMC Board (4KC + GT64120)
diff --git a/drivers/tc/.gitignore b/drivers/tc/.gitignore
deleted file mode 100644 (file)
index acc0e1e..0000000
+++ /dev/null
@@ -1 +0,0 @@
-lk201-map.c
index c899246bd3627ffc991f28e9ff1e2aa90f720c65..623b21063228467c85808fada2124326a6f7e3b5 100644 (file)
@@ -5,18 +5,3 @@
 # Object file lists.
 
 obj-$(CONFIG_TC) += tc.o tc-driver.o
-obj-$(CONFIG_VT) += lk201.o lk201-map.o lk201-remap.o
-
-$(obj)/lk201-map.o: $(obj)/lk201-map.c
-
-# Uncomment if you're changing the keymap and have an appropriate
-# loadkeys version for the map. By default, we'll use the shipped
-# versions.
-# GENERATE_KEYMAP := 1
-
-ifdef GENERATE_KEYMAP
-
-$(obj)/lk201-map.c: $(obj)/%.c: $(src)/%.map
-       loadkeys --mktable $< > $@
-
-endif
diff --git a/drivers/tc/lk201-map.c_shipped b/drivers/tc/lk201-map.c_shipped
deleted file mode 100644 (file)
index 4d2aba5..0000000
+++ /dev/null
@@ -1,265 +0,0 @@
-
-/* Do not edit this file! It was automatically generated by   */
-/*    loadkeys --mktable defkeymap.map > defkeymap.c          */
-
-#include <linux/types.h>
-#include <linux/keyboard.h>
-#include <linux/kd.h>
-
-u_short plain_map[NR_KEYS] = {
-       0xf200, 0xf100, 0xf101, 0xf102, 0xf103, 0xf104, 0xf105, 0xf106,
-       0xf107, 0xf108, 0xf109, 0xf10a, 0xf10b, 0xf10c, 0xf10d, 0xf11b,
-       0xf11c, 0xf110, 0xf111, 0xf112, 0xf113, 0xf060, 0xf031, 0xf032,
-       0xf033, 0xf034, 0xf035, 0xf036, 0xf037, 0xf038, 0xf039, 0xf030,
-       0xf02d, 0xf03d, 0xf07f, 0xf114, 0xf115, 0xf116, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf009, 0xfb71, 0xfb77, 0xfb65, 0xfb72, 0xfb74,
-       0xfb79, 0xfb75, 0xfb69, 0xfb6f, 0xfb70, 0xf05b, 0xf05d, 0xf201,
-       0xf117, 0xf118, 0xf119, 0xf307, 0xf308, 0xf309, 0xf30b, 0xf702,
-       0xf207, 0xfb61, 0xfb73, 0xfb64, 0xfb66, 0xfb67, 0xfb68, 0xfb6a,
-       0xfb6b, 0xfb6c, 0xf03b, 0xf027, 0xf05c, 0xf603, 0xf304, 0xf305,
-       0xf306, 0xf200, 0xf700, 0xf03e, 0xfb7a, 0xfb78, 0xfb63, 0xfb76,
-       0xfb62, 0xfb6e, 0xfb6d, 0xf02c, 0xf02e, 0xf02f, 0xf200, 0xf601,
-       0xf600, 0xf602, 0xf301, 0xf302, 0xf303, 0xf30e, 0xf200, 0xf703,
-       0xf020, 0xf200, 0xf200, 0xf300, 0xf310, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-static u_short shift_map[NR_KEYS] = {
-       0xf200, 0xf100, 0xf101, 0xf102, 0xf103, 0xf104, 0xf105, 0xf106,
-       0xf107, 0xf108, 0xf109, 0xf10a, 0xf10b, 0xf10c, 0xf10d, 0xf203,
-       0xf11c, 0xf110, 0xf111, 0xf112, 0xf113, 0xf07e, 0xf021, 0xf040,
-       0xf023, 0xf024, 0xf025, 0xf05e, 0xf026, 0xf02a, 0xf028, 0xf029,
-       0xf05f, 0xf02b, 0xf07f, 0xf114, 0xf115, 0xf116, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf009, 0xfb51, 0xfb57, 0xfb45, 0xfb52, 0xfb54,
-       0xfb59, 0xfb55, 0xfb49, 0xfb4f, 0xfb50, 0xf07b, 0xf07d, 0xf201,
-       0xf117, 0xf20b, 0xf20a, 0xf307, 0xf308, 0xf309, 0xf30b, 0xf702,
-       0xf207, 0xfb41, 0xfb53, 0xfb44, 0xfb46, 0xfb47, 0xfb48, 0xfb4a,
-       0xfb4b, 0xfb4c, 0xf03a, 0xf022, 0xf07c, 0xf603, 0xf304, 0xf305,
-       0xf306, 0xf200, 0xf700, 0xf03c, 0xfb5a, 0xfb58, 0xfb43, 0xfb56,
-       0xfb42, 0xfb4e, 0xfb4d, 0xf03c, 0xf03e, 0xf03f, 0xf200, 0xf601,
-       0xf600, 0xf602, 0xf301, 0xf302, 0xf303, 0xf30e, 0xf200, 0xf703,
-       0xf020, 0xf200, 0xf200, 0xf300, 0xf310, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-static u_short altgr_map[NR_KEYS] = {
-       0xf200, 0xf100, 0xf101, 0xf102, 0xf103, 0xf104, 0xf105, 0xf106,
-       0xf107, 0xf108, 0xf109, 0xf10a, 0xf10b, 0xf10c, 0xf10d, 0xf202,
-       0xf11c, 0xf110, 0xf111, 0xf112, 0xf113, 0xf200, 0xf200, 0xf040,
-       0xf200, 0xf024, 0xf200, 0xf200, 0xf07b, 0xf05b, 0xf05d, 0xf07d,
-       0xf05c, 0xf200, 0xf200, 0xf114, 0xf115, 0xf116, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xfb71, 0xfb77, 0xf918, 0xfb72, 0xfb74,
-       0xfb79, 0xfb75, 0xfb69, 0xfb6f, 0xfb70, 0xf200, 0xf07e, 0xf201,
-       0xf117, 0xf118, 0xf119, 0xf911, 0xf912, 0xf913, 0xf30b, 0xf702,
-       0xf207, 0xf914, 0xfb73, 0xf917, 0xf919, 0xfb67, 0xfb68, 0xfb6a,
-       0xfb6b, 0xfb6c, 0xf200, 0xf200, 0xf200, 0xf603, 0xf90e, 0xf90f,
-       0xf910, 0xf200, 0xf700, 0xf200, 0xfb7a, 0xfb78, 0xf916, 0xfb76,
-       0xf915, 0xfb6e, 0xfb6d, 0xf200, 0xf200, 0xf200, 0xf200, 0xf601,
-       0xf600, 0xf602, 0xf90b, 0xf90c, 0xf90d, 0xf30e, 0xf200, 0xf703,
-       0xf200, 0xf200, 0xf200, 0xf90a, 0xf310, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-static u_short ctrl_map[NR_KEYS] = {
-       0xf200, 0xf100, 0xf101, 0xf102, 0xf103, 0xf104, 0xf105, 0xf106,
-       0xf107, 0xf108, 0xf109, 0xf10a, 0xf10b, 0xf10c, 0xf10d, 0xf204,
-       0xf11c, 0xf110, 0xf111, 0xf112, 0xf113, 0xf81b, 0xf200, 0xf000,
-       0xf01b, 0xf01c, 0xf01d, 0xf01e, 0xf01f, 0xf07f, 0xf200, 0xf200,
-       0xf01f, 0xf200, 0xf008, 0xf114, 0xf115, 0xf116, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf011, 0xf017, 0xf005, 0xf012, 0xf014,
-       0xf019, 0xf015, 0xf009, 0xf00f, 0xf010, 0xf01b, 0xf01d, 0xf201,
-       0xf117, 0xf118, 0xf119, 0xf307, 0xf308, 0xf309, 0xf30b, 0xf702,
-       0xf207, 0xf001, 0xf013, 0xf004, 0xf006, 0xf007, 0xf008, 0xf00a,
-       0xf00b, 0xf00c, 0xf200, 0xf007, 0xf01c, 0xf603, 0xf304, 0xf305,
-       0xf306, 0xf200, 0xf700, 0xf200, 0xf01a, 0xf018, 0xf003, 0xf016,
-       0xf002, 0xf00e, 0xf00d, 0xf200, 0xf20e, 0xf07f, 0xf200, 0xf601,
-       0xf600, 0xf602, 0xf301, 0xf302, 0xf303, 0xf30e, 0xf200, 0xf703,
-       0xf000, 0xf200, 0xf200, 0xf300, 0xf310, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-static u_short shift_ctrl_map[NR_KEYS] = {
-       0xf200, 0xf100, 0xf101, 0xf102, 0xf103, 0xf104, 0xf105, 0xf106,
-       0xf107, 0xf108, 0xf109, 0xf10a, 0xf10b, 0xf10c, 0xf10d, 0xf200,
-       0xf11c, 0xf110, 0xf111, 0xf112, 0xf113, 0xf200, 0xf200, 0xf000,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-       0xf01f, 0xf200, 0xf200, 0xf114, 0xf115, 0xf116, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf011, 0xf017, 0xf005, 0xf012, 0xf014,
-       0xf019, 0xf015, 0xf009, 0xf00f, 0xf010, 0xf200, 0xf200, 0xf201,
-       0xf117, 0xf118, 0xf119, 0xf307, 0xf308, 0xf309, 0xf30b, 0xf702,
-       0xf207, 0xf001, 0xf013, 0xf004, 0xf006, 0xf007, 0xf008, 0xf00a,
-       0xf00b, 0xf00c, 0xf200, 0xf200, 0xf200, 0xf603, 0xf304, 0xf305,
-       0xf306, 0xf200, 0xf700, 0xf200, 0xf01a, 0xf018, 0xf003, 0xf016,
-       0xf002, 0xf00e, 0xf00d, 0xf200, 0xf200, 0xf200, 0xf200, 0xf601,
-       0xf600, 0xf602, 0xf301, 0xf302, 0xf303, 0xf30e, 0xf200, 0xf703,
-       0xf200, 0xf200, 0xf200, 0xf300, 0xf310, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-static u_short alt_map[NR_KEYS] = {
-       0xf200, 0xf500, 0xf501, 0xf502, 0xf503, 0xf504, 0xf505, 0xf506,
-       0xf507, 0xf508, 0xf509, 0xf50a, 0xf50b, 0xf50c, 0xf50d, 0xf200,
-       0xf11c, 0xf510, 0xf511, 0xf512, 0xf513, 0xf01b, 0xf831, 0xf832,
-       0xf833, 0xf834, 0xf835, 0xf836, 0xf837, 0xf838, 0xf839, 0xf830,
-       0xf82d, 0xf83d, 0xf87f, 0xf114, 0xf115, 0xf116, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf809, 0xf871, 0xf877, 0xf865, 0xf872, 0xf874,
-       0xf879, 0xf875, 0xf869, 0xf86f, 0xf870, 0xf85b, 0xf85d, 0xf80d,
-       0xf117, 0xf118, 0xf119, 0xf907, 0xf908, 0xf909, 0xf30b, 0xf702,
-       0xf207, 0xf861, 0xf873, 0xf864, 0xf866, 0xf867, 0xf868, 0xf86a,
-       0xf86b, 0xf86c, 0xf83b, 0xf827, 0xf85c, 0xf603, 0xf904, 0xf905,
-       0xf906, 0xf200, 0xf700, 0xf200, 0xf87a, 0xf878, 0xf863, 0xf876,
-       0xf862, 0xf86e, 0xf86d, 0xf82c, 0xf82e, 0xf82f, 0xf200, 0xf210,
-       0xf600, 0xf211, 0xf901, 0xf902, 0xf903, 0xf30e, 0xf200, 0xf703,
-       0xf820, 0xf200, 0xf200, 0xf900, 0xf310, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-static u_short ctrl_alt_map[NR_KEYS] = {
-       0xf200, 0xf500, 0xf501, 0xf502, 0xf503, 0xf504, 0xf505, 0xf506,
-       0xf507, 0xf508, 0xf509, 0xf50a, 0xf50b, 0xf50c, 0xf50d, 0xf200,
-       0xf11c, 0xf510, 0xf511, 0xf512, 0xf513, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf114, 0xf115, 0xf20c, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf811, 0xf817, 0xf805, 0xf812, 0xf814,
-       0xf819, 0xf815, 0xf809, 0xf80f, 0xf810, 0xf200, 0xf200, 0xf201,
-       0xf117, 0xf118, 0xf119, 0xf307, 0xf308, 0xf309, 0xf30b, 0xf702,
-       0xf207, 0xf801, 0xf813, 0xf804, 0xf806, 0xf807, 0xf808, 0xf80a,
-       0xf80b, 0xf80c, 0xf200, 0xf200, 0xf200, 0xf603, 0xf304, 0xf305,
-       0xf306, 0xf200, 0xf700, 0xf200, 0xf81a, 0xf818, 0xf803, 0xf816,
-       0xf802, 0xf80e, 0xf80d, 0xf200, 0xf200, 0xf200, 0xf200, 0xf601,
-       0xf600, 0xf602, 0xf301, 0xf302, 0xf303, 0xf30e, 0xf200, 0xf703,
-       0xf200, 0xf200, 0xf200, 0xf300, 0xf20c, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-       0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-ushort *key_maps[MAX_NR_KEYMAPS] = {
-       plain_map, shift_map, altgr_map, 0,
-       ctrl_map, shift_ctrl_map, 0, 0,
-       alt_map, 0, 0, 0,
-       ctrl_alt_map,   0
-};
-
-unsigned int keymap_count = 7;
-
-
-/*
- * Philosophy: most people do not define more strings, but they who do
- * often want quite a lot of string space. So, we statically allocate
- * the default and allocate dynamically in chunks of 512 bytes.
- */
-
-char func_buf[] = {
-       '\033', '[', '[', 'A', 0, 
-       '\033', '[', '[', 'B', 0, 
-       '\033', '[', '[', 'C', 0, 
-       '\033', '[', '[', 'D', 0, 
-       '\033', '[', '[', 'E', 0, 
-       '\033', '[', '1', '7', '~', 0, 
-       '\033', '[', '1', '8', '~', 0, 
-       '\033', '[', '1', '9', '~', 0, 
-       '\033', '[', '2', '0', '~', 0, 
-       '\033', '[', '2', '1', '~', 0, 
-       '\033', '[', '2', '3', '~', 0, 
-       '\033', '[', '2', '4', '~', 0, 
-       '\033', '[', '2', '5', '~', 0, 
-       '\033', '[', '2', '6', '~', 0, 
-       '\033', '[', '2', '8', '~', 0, 
-       '\033', '[', '2', '9', '~', 0, 
-       '\033', '[', '3', '1', '~', 0, 
-       '\033', '[', '3', '2', '~', 0, 
-       '\033', '[', '3', '3', '~', 0, 
-       '\033', '[', '3', '4', '~', 0, 
-       '\033', '[', '1', '~', 0, 
-       '\033', '[', '2', '~', 0, 
-       '\033', '[', '3', '~', 0, 
-       '\033', '[', '4', '~', 0, 
-       '\033', '[', '5', '~', 0, 
-       '\033', '[', '6', '~', 0, 
-       '\033', '[', 'M', 0, 
-       '\033', '[', 'P', 0, 
-};
-
-
-char *funcbufptr = func_buf;
-int funcbufsize = sizeof(func_buf);
-int funcbufleft = 0;          /* space left */
-
-char *func_table[MAX_NR_FUNC] = {
-       func_buf + 0,
-       func_buf + 5,
-       func_buf + 10,
-       func_buf + 15,
-       func_buf + 20,
-       func_buf + 25,
-       func_buf + 31,
-       func_buf + 37,
-       func_buf + 43,
-       func_buf + 49,
-       func_buf + 55,
-       func_buf + 61,
-       func_buf + 67,
-       func_buf + 73,
-       func_buf + 79,
-       func_buf + 85,
-       func_buf + 91,
-       func_buf + 97,
-       func_buf + 103,
-       func_buf + 109,
-       func_buf + 115,
-       func_buf + 120,
-       func_buf + 125,
-       func_buf + 130,
-       func_buf + 135,
-       func_buf + 140,
-       func_buf + 145,
-       0,
-       0,
-       func_buf + 149,
-       0,
-};
-
-struct kbdiacruc accent_table[MAX_DIACR] = {
-       {'`', 'A', 'À'},        {'`', 'a', 'à'},
-       {'\'', 'A', 'Á'},       {'\'', 'a', 'á'},
-       {'^', 'A', 'Â'},        {'^', 'a', 'â'},
-       {'~', 'A', 'Ã'},        {'~', 'a', 'ã'},
-       {'"', 'A', 'Ä'},        {'"', 'a', 'ä'},
-       {'O', 'A', 'Å'},        {'o', 'a', 'å'},
-       {'0', 'A', 'Å'},        {'0', 'a', 'å'},
-       {'A', 'A', 'Å'},        {'a', 'a', 'å'},
-       {'A', 'E', 'Æ'},        {'a', 'e', 'æ'},
-       {',', 'C', 'Ç'},        {',', 'c', 'ç'},
-       {'`', 'E', 'È'},        {'`', 'e', 'è'},
-       {'\'', 'E', 'É'},       {'\'', 'e', 'é'},
-       {'^', 'E', 'Ê'},        {'^', 'e', 'ê'},
-       {'"', 'E', 'Ë'},        {'"', 'e', 'ë'},
-       {'`', 'I', 'Ì'},        {'`', 'i', 'ì'},
-       {'\'', 'I', 'Í'},       {'\'', 'i', 'í'},
-       {'^', 'I', 'Î'},        {'^', 'i', 'î'},
-       {'"', 'I', 'Ï'},        {'"', 'i', 'ï'},
-       {'-', 'D', 'Ð'},        {'-', 'd', 'ð'},
-       {'~', 'N', 'Ñ'},        {'~', 'n', 'ñ'},
-       {'`', 'O', 'Ò'},        {'`', 'o', 'ò'},
-       {'\'', 'O', 'Ó'},       {'\'', 'o', 'ó'},
-       {'^', 'O', 'Ô'},        {'^', 'o', 'ô'},
-       {'~', 'O', 'Õ'},        {'~', 'o', 'õ'},
-       {'"', 'O', 'Ö'},        {'"', 'o', 'ö'},
-       {'/', 'O', 'Ø'},        {'/', 'o', 'ø'},
-       {'`', 'U', 'Ù'},        {'`', 'u', 'ù'},
-       {'\'', 'U', 'Ú'},       {'\'', 'u', 'ú'},
-       {'^', 'U', 'Û'},        {'^', 'u', 'û'},
-       {'"', 'U', 'Ü'},        {'"', 'u', 'ü'},
-       {'\'', 'Y', 'Ý'},       {'\'', 'y', 'ý'},
-       {'T', 'H', 'Þ'},        {'t', 'h', 'þ'},
-       {'s', 's', 'ß'},        {'"', 'y', 'ÿ'},
-       {'s', 'z', 'ß'},        {'i', 'j', 'ÿ'},
-};
-
-unsigned int accent_table_size = 68;
diff --git a/drivers/tc/lk201-map.map b/drivers/tc/lk201-map.map
deleted file mode 100644 (file)
index 2c636b4..0000000
+++ /dev/null
@@ -1,356 +0,0 @@
-# Default kernel keymap. This uses 7 modifier combinations.
-keymaps 0-2,4-5,8,12
-# Change the above line into
-#      keymaps 0-2,4-6,8,12
-# in case you want the entries
-#      altgr   control keycode  83 = Boot
-#      altgr   control keycode 111 = Boot
-# below.
-#
-# In fact AltGr is used very little, and one more keymap can
-# be saved by mapping AltGr to Alt (and adapting a few entries):
-# keycode 100 = Alt
-#
-keycode   0x15 = grave         tilde
-       alt     keycode   0x15 = Escape
-       control keycode   0x15 = Meta_Escape
-keycode   0x16 = one              exclam
-       alt     keycode   0x16 = Meta_one
-keycode   0x17 = two              at               at
-       control keycode   0x17 = nul
-       shift   control keycode   0x17 = nul
-       alt     keycode   0x17 = Meta_two
-keycode   0x18 = three            numbersign
-       control keycode   0x18 = Escape
-       alt     keycode   0x18 = Meta_three
-keycode   0x19 = four             dollar           dollar
-       control keycode   0x19 = Control_backslash
-       alt     keycode   0x19 = Meta_four
-keycode   0x1a = five             percent
-       control keycode   0x1a = Control_bracketright
-       alt     keycode   0x1a = Meta_five
-keycode   0x1b = six              asciicircum
-       control keycode   0x1b = Control_asciicircum
-       alt     keycode   0x1b = Meta_six
-keycode   0x1c = seven            ampersand        braceleft
-       control keycode   0x1c = Control_underscore
-       alt     keycode   0x1c = Meta_seven
-keycode   0x1d = eight            asterisk         bracketleft
-       control keycode   0x1d = Delete
-       alt     keycode   0x1d = Meta_eight
-keycode  0x1e = nine             parenleft        bracketright
-       alt     keycode  0x1e = Meta_nine
-keycode  0x1f = zero             parenright       braceright
-       alt     keycode  0x1f = Meta_zero
-keycode  0x20 = minus            underscore       backslash
-       control keycode  0x20 = Control_underscore
-       shift   control keycode  0x20 = Control_underscore
-       alt     keycode  0x20 = Meta_minus
-keycode  0x21 = equal            plus
-       alt     keycode  0x21 = Meta_equal
-keycode  0x22 = Delete           Delete
-       control keycode  0x22 = BackSpace
-       alt     keycode  0x22 = Meta_Delete
-keycode  0x2a = Tab              Tab
-       alt     keycode  0x2a = Meta_Tab
-keycode  0x2b = q
-keycode  0x2c = w
-keycode  0x2d = e
-       altgr   keycode  0x2d = Hex_E
-keycode  0x2e = r
-keycode  0x2f = t
-keycode  0x30 = y
-keycode  0x31 = u
-keycode  0x32 = i
-keycode  0x33 = o
-keycode  0x34 = p
-keycode  0x35 = bracketleft      braceleft
-       control keycode  0x35 = Escape
-       alt     keycode  0x35 = Meta_bracketleft
-keycode  0x36 = bracketright     braceright       asciitilde
-       control keycode  0x36 = Control_bracketright
-       alt     keycode  0x36 = Meta_bracketright
-keycode  0x37 = Return
-       alt     keycode  0x37 = Meta_Control_m
-keycode  0x3f = Control
-keycode  0x41 = a
-       altgr   keycode  0x41 = Hex_A
-keycode  0x42 = s
-keycode  0x43 = d
-       altgr   keycode  0x43 = Hex_D
-keycode  0x44 = f
-       altgr   keycode  0x44 = Hex_F
-keycode  0x45 = g
-keycode  0x46 = h
-keycode  0x47 = j
-keycode  0x48 = k
-keycode  0x49 = l
-keycode  0x4a = semicolon        colon
-       alt     keycode  0x4a = Meta_semicolon
-keycode  0x4b = apostrophe       quotedbl
-       control keycode  0x4b = Control_g
-       alt     keycode  0x4b = Meta_apostrophe
-# keycode  41 = grave            asciitilde
-#      control keycode  41 = nul
-#      alt     keycode  41 = Meta_grave
-keycode  0x52 = Shift
-keycode  0x4c = backslash        bar
-       control keycode  0x4c = Control_backslash
-       alt     keycode  0x4c = Meta_backslash
-keycode  0x53 = greater        less
-keycode  0x54 = z
-keycode  0x55 = x
-keycode  0x56 = c
-       altgr   keycode  0x56 = Hex_C
-keycode  0x57 = v
-keycode  0x58 = b
-       altgr   keycode  0x58 = Hex_B
-keycode  0x59 = n
-keycode  0x5a = m
-keycode  0x5b = comma            less
-       alt     keycode  0x5b = Meta_comma
-keycode  0x5c = period           greater
-       control keycode  0x5c = Compose
-       alt     keycode  0x5c = Meta_period
-keycode  0x5d = slash            question
-       control keycode  0x5d = Delete
-       alt     keycode  0x5d = Meta_slash
-
-keycode  0x67 = Alt
-keycode  0x68 = space            space
-       control keycode  0x68 = nul
-       alt     keycode  0x68 = Meta_space
-keycode  0x40 = Caps_Lock
-keycode  0x01 = F1
-       control keycode  0x01 = F1
-       alt     keycode  0x01 = Console_1
-       control alt     keycode  0x01 = Console_1
-keycode  0x02 = F2
-       control keycode  0x02 = F2
-       alt     keycode  0x02 = Console_2
-       control alt     keycode  0x02 = Console_2
-keycode  0x03 = F3
-       control keycode  0x03 = F3
-       alt     keycode  0x03 = Console_3
-       control alt     keycode  0x03 = Console_3
-keycode  0x04 = F4
-       control keycode  0x04 = F4
-       alt     keycode  0x04 = Console_4
-       control alt     keycode  0x04 = Console_4
-keycode  0x05 = F5
-       control keycode  0x05 = F5
-       alt     keycode  0x05 = Console_5
-       control alt     keycode  0x05 = Console_5
-keycode  0x06 = F6
-       control keycode  0x06 = F6
-       alt     keycode  0x06 = Console_6
-       control alt     keycode  0x06 = Console_6
-keycode  0x07 = F7
-       control keycode  0x07 = F7
-       alt     keycode  0x07 = Console_7
-       control alt     keycode  0x07 = Console_7
-keycode  0x08 = F8
-       control keycode  0x08 = F8
-       alt     keycode  0x08 = Console_8
-       control alt     keycode  0x08 = Console_8
-keycode  0x09 = F9
-       control keycode  0x09 = F9
-       alt     keycode  0x09 = Console_9
-       control alt     keycode  0x09 = Console_9
-keycode  0x0a = F10
-       control keycode  0x0a = F10
-       alt     keycode  0x0a = Console_10
-       control alt     keycode  0x0a = Console_10
-keycode  0x0b = F11
-       control keycode  0x0b = F11
-       alt     keycode  0x0b = Console_11
-       control alt     keycode  0x0b = Console_11
-keycode  0x0c = F12
-       control keycode  0x0c = F12
-       alt     keycode  0x0c = Console_12
-       control alt     keycode  0x0c = Console_12
-keycode  0x0d = F13
-       control keycode  0x0d = F13
-       alt     keycode  0x0d = Console_13
-       control alt     keycode  0x0d = Console_13
-keycode  0x0e = F14
-       control keycode  0x0e = F14
-       alt     keycode  0x0e = Console_14
-       control alt     keycode  0x0e = Console_14
-
-keycode  0x11 = F17
-       control keycode  0x11 = F17
-       alt     keycode  0x11 = Console_17
-       control alt     keycode  0x11 = Console_17
-keycode  0x12 = F18
-       control keycode  0x12 = F18
-       alt     keycode  0x12 = Console_18
-       control alt     keycode  0x12 = Console_18
-keycode  0x13 = F19
-       control keycode  0x13 = F19
-       alt     keycode  0x13 = Console_19
-       control alt     keycode  0x13 = Console_19
-keycode  0x14 = F20
-       control keycode  0x14 = F20
-       alt     keycode  0x14 = Console_20
-       control alt     keycode  0x14 = Console_20
-
-
-keycode  0x3b = KP_7
-       alt     keycode  0x3b = Ascii_7
-       altgr   keycode  0x3b = Hex_7
-keycode  0x3c = KP_8
-       alt     keycode  0x3c = Ascii_8
-       altgr   keycode  0x3c = Hex_8
-keycode  0x3d = KP_9
-       alt     keycode  0x3d = Ascii_9
-       altgr   keycode  0x3d = Hex_9
-keycode  0x3e = KP_Subtract
-keycode  0x4e = KP_4
-       alt     keycode  0x4e = Ascii_4
-       altgr   keycode  0x4e = Hex_4
-keycode  0x4f = KP_5
-       alt     keycode  0x4f = Ascii_5
-       altgr   keycode  0x4f = Hex_5
-keycode  0x50 = KP_6
-       alt     keycode  0x50 = Ascii_6
-       altgr   keycode  0x50 = Hex_6
-keycode  0x62 = KP_1
-       alt     keycode  0x62 = Ascii_1
-       altgr   keycode  0x62 = Hex_1
-keycode  0x63 = KP_2
-       alt     keycode  0x63 = Ascii_2
-       altgr   keycode  0x63 = Hex_2
-keycode  0x64 = KP_3
-       alt     keycode  0x64 = Ascii_3
-       altgr   keycode  0x64 = Hex_3
-keycode  0x6b = KP_0
-       alt     keycode  0x6b = Ascii_0
-       altgr   keycode  0x6b = Hex_0
-keycode  0x6c = KP_Period
-#      altgr   control keycode  0x6c = Boot
-       control alt     keycode  0x6c = Boot
-keycode  0x65 = KP_Enter
-
-keycode  0x3f = Control
-
-# keycode 100 = AltGr
-
-keycode 0x23 = Find
-keycode 0x4d = Up
-keycode 0x39 = Prior
-       shift   keycode 0x39 = Scroll_Backward
-keycode 0x5f = Left
-       alt     keycode 0x5f = Decr_Console
-keycode 0x61 = Right
-       alt     keycode 0x61 = Incr_Console
-keycode 0x38 = Select
-keycode 0x60 = Down
-keycode 0x3a = Next
-       shift   keycode 0x3a = Scroll_Forward
-keycode 0x24 = Insert
-keycode 0x25 = Remove
-#      altgr   control keycode 0x25 = Boot
-       control alt     keycode 0x25 = Boot
-
-keycode 0x0f = Help      Show_Memory      Show_Registers
-       control keycode  0x0f = Show_State
-
-keycode 0x10 = Do
-
-string F1 = "\033[[A"
-string F2 = "\033[[B"
-string F3 = "\033[[C"
-string F4 = "\033[[D"
-string F5 = "\033[[E"
-string F6 = "\033[17~"
-string F7 = "\033[18~"
-string F8 = "\033[19~"
-string F9 = "\033[20~"
-string F10 = "\033[21~"
-string F11 = "\033[23~"
-string F12 = "\033[24~"
-string F13 = "\033[25~"
-string F14 = "\033[26~"
-string F15 = "\033[28~"
-string F16 = "\033[29~"
-string F17 = "\033[31~"
-string F18 = "\033[32~"
-string F19 = "\033[33~"
-string F20 = "\033[34~"
-string Find = "\033[1~"
-string Insert = "\033[2~"
-string Remove = "\033[3~"
-string Select = "\033[4~"
-string Prior = "\033[5~"
-string Next = "\033[6~"
-string Macro = "\033[M"
-string Pause = "\033[P"
-compose '`' 'A' to 'À'
-compose '`' 'a' to 'à'
-compose '\'' 'A' to 'Á'
-compose '\'' 'a' to 'á'
-compose '^' 'A' to 'Â'
-compose '^' 'a' to 'â'
-compose '~' 'A' to 'Ã'
-compose '~' 'a' to 'ã'
-compose '"' 'A' to 'Ä'
-compose '"' 'a' to 'ä'
-compose 'O' 'A' to 'Å'
-compose 'o' 'a' to 'å'
-compose '0' 'A' to 'Å'
-compose '0' 'a' to 'å'
-compose 'A' 'A' to 'Å'
-compose 'a' 'a' to 'å'
-compose 'A' 'E' to 'Æ'
-compose 'a' 'e' to 'æ'
-compose ',' 'C' to 'Ç'
-compose ',' 'c' to 'ç'
-compose '`' 'E' to 'È'
-compose '`' 'e' to 'è'
-compose '\'' 'E' to 'É'
-compose '\'' 'e' to 'é'
-compose '^' 'E' to 'Ê'
-compose '^' 'e' to 'ê'
-compose '"' 'E' to 'Ë'
-compose '"' 'e' to 'ë'
-compose '`' 'I' to 'Ì'
-compose '`' 'i' to 'ì'
-compose '\'' 'I' to 'Í'
-compose '\'' 'i' to 'í'
-compose '^' 'I' to 'Î'
-compose '^' 'i' to 'î'
-compose '"' 'I' to 'Ï'
-compose '"' 'i' to 'ï'
-compose '-' 'D' to 'Ð'
-compose '-' 'd' to 'ð'
-compose '~' 'N' to 'Ñ'
-compose '~' 'n' to 'ñ'
-compose '`' 'O' to 'Ò'
-compose '`' 'o' to 'ò'
-compose '\'' 'O' to 'Ó'
-compose '\'' 'o' to 'ó'
-compose '^' 'O' to 'Ô'
-compose '^' 'o' to 'ô'
-compose '~' 'O' to 'Õ'
-compose '~' 'o' to 'õ'
-compose '"' 'O' to 'Ö'
-compose '"' 'o' to 'ö'
-compose '/' 'O' to 'Ø'
-compose '/' 'o' to 'ø'
-compose '`' 'U' to 'Ù'
-compose '`' 'u' to 'ù'
-compose '\'' 'U' to 'Ú'
-compose '\'' 'u' to 'ú'
-compose '^' 'U' to 'Û'
-compose '^' 'u' to 'û'
-compose '"' 'U' to 'Ü'
-compose '"' 'u' to 'ü'
-compose '\'' 'Y' to 'Ý'
-compose '\'' 'y' to 'ý'
-compose 'T' 'H' to 'Þ'
-compose 't' 'h' to 'þ'
-compose 's' 's' to 'ß'
-compose '"' 'y' to 'ÿ'
-compose 's' 'z' to 'ß'
-compose 'i' 'j' to 'ÿ'
diff --git a/drivers/tc/lk201-remap.c b/drivers/tc/lk201-remap.c
deleted file mode 100644 (file)
index d39098c..0000000
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Keyboard mappings for DEC LK201/401/501 keyboards
- *
- * 17.05.99 Michael Engel (engel@unix-ag.org)
- *
- * DEC US keyboards generate keycodes in the range 0x55 - 0xfb
- *
- * This conflicts with Linux scancode conventions which define
- * 0x00-0x7f as "normal" and 0x80-0xff as "shifted" scancodes, so we
- * have to remap the keycodes to 0x00-0x7f with the scancodeRemap
- * array. The generated scancode is simply the number of the key counted
- * from the left upper to the right lower corner of the keyboard ...
- *
- * These scancodes are then being remapped (I hope ;-)) with the
- * lk501*map[] arrays which define scancode -> Linux code mapping
- *
- * Oh man is this horrible ;-)
- *
- * Scancodes with dual labels exist for keyboards as follows:
- *
- * code:  left label          / right label
- *
- * 0x73:  LKx01, LK421        / LK443, LK444
- * 0x74:  LKx01, LK421        / LK443, LK444
- * 0x7c:  LKx01, LK421        / LK443, LK444
- * 0x8a:  LKx01, LK421        / LK443, LK444
- * 0x8b:  LKx01, LK421        / LK443, LK444
- * 0x8c:  LKx01, LK421        / LK443, LK444
- * 0x8d:  LKx01, LK421        / LK443, LK444
- * 0x8e:  LKx01, LK421        / LK443, LK444
- * 0x8f:  LKx01, LK421        / LK443, LK444
- * 0x9c:  LKx01, LK421        / LK443, LK444
- * 0xa1:  LKx01, LK421        / LK443, LK444
- * 0xa2:  LKx01, LK421        / LK443, LK444
- * 0xa3:  LKx01, LK421        / LK443, LK444
- * 0xa4:  LKx01, LK421        / LK443, LK444
- * 0xad:         LK421        / LK443, LK444
- * 0xc9:  LKx01, LK421, LK443 /        LK444
- * 0xf7:  LKx01,        LK443 /        LK444
- */
-
-unsigned char scancodeRemap[256] = {
-/* -----                                                               */
-/*  0 */ 0,            0,              0,              0,
-/* -----                                                               */
-/*  4 */ 0,            0,              0,              0,
-/* -----                                                               */
-/*  8 */ 0,            0,              0,              0,
-/* -----                                                               */
-/*  c */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 10 */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 14 */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 18 */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 1c */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 20 */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 24 */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 28 */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 2c */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 30 */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 34 */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 38 */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 3c */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 40 */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 44 */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 48 */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 4c */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 50 */ 0,            0,              0,              0,
-/* -----               ESC             F1              F2              */
-/* 54 */ 0,            0,              0x01,           0x02,
-/* ----- F3            F4              F5                              */
-/* 58 */ 0x03,         0x04,           0x05,           0,
-/* -----                                                               */
-/* 5c */ 0,            0,              0,              0,
-/* -----                                                               */
-/* 60 */ 0,            0,              0,              0,
-/* ----- F6            F7              F8              F9              */
-/* 64 */ 0x06,         0x07,           0x08,           0x09,
-/* ----- F10                                                           */
-/* 68 */ 0x0a,         0,              0,              0,
-/* -----                                                               */
-/* 6c */ 0,            0,              0,              0,
-/* -----               F11             F12             F13/PRNT SCRN   */
-/* 70 */ 0,            0x0b,           0x0c,           0x0d,
-/* ----- F14/SCRL LCK                                                  */
-/* 74 */ 0x0e,         0,              0,              0,
-/* -----                                                               */
-/* 78 */ 0,            0,              0,              0,
-/* ----- HELP/PAUSE    DO                                              */
-/* 7c */ 0x0f,         0x10,           0,              0,
-/* ----- F17           F18             F19             F20             */
-/* 80 */ 0x11,         0x12,           0x13,           0x14,
-/* -----                                                               */
-/* 84 */ 0,            0,              0,              0,
-/* -----                               FIND/INSERT     INSERT/HOME     */
-/* 88 */ 0,            0,              0x23,           0x24,
-/* ----- REMOVE/PG UP  SELECT/DELETE   PREVIOUS/END    NEXT/PG DN      */
-/* 8c */ 0x25,         0x38,           0x39,           0x3a,
-/* -----                               KP 0                            */
-/* 90 */ 0,            0,              0x6b,           0,
-/* ----- KP .          KP ENTER        KP 1            KP 2            */
-/* 94 */ 0x6c,         0x65,           0x62,           0x63,
-/* ----- KP 3          KP 4            KP 5            KP 6            */
-/* 98 */ 0x64,         0x4e,           0x4f,           0x50,
-/* ----- KP ,/KP +     KP 7            KP 8            KP 9            */
-/* 9c */ 0x51,         0x3b,           0x3c,           0x3d,
-/* ----- KP -          KP F1/NUM LCK   KP F2/KP /      KP F3/KP *      */
-/* a0 */ 0x3e,         0x26,           0x27,           0x28,
-/* ----- KP F4/KP -                                    LEFT            */
-/* a4 */ 0x29,         0,              0,              0x5f,
-/* ----- RIGHT         DOWN            UP              SHIFT Rt        */
-/* a8 */ 0x61,         0x60,           0x4d,           0x5e,
-/* ----- ALT           COMP Rt/CTRL Rt SHIFT           CONTROL         */
-/* ac */ 0,            0,              0x52,           0x3f,
-/* ----- CAPS          COMPOSE         ALT Rt                          */
-/* b0 */ 0x40,         0x67,           0,              0,
-/* -----                                                               */
-/* b4 */ 0,            0,              0,              0,
-/* -----                                                               */
-/* b8 */ 0,            0,              0,              0,
-/* ----- BKSP          RET             TAB             `               */
-/* bc */ 0x22,         0x37,           0x2a,           0x15,
-/* ----- 1             q               a               z               */
-/* c0 */ 0x16,         0x2b,           0x41,           0x54,
-/* -----               2               w               s               */
-/* c4 */ 0,            0x17,           0x2c,           0x42,
-/* ----- x             </\\                            3               */
-/* c8 */ 0x55,         0x53,           0,              0x18,
-/* ----- e             d               c                               */
-/* cc */ 0x2d,         0x43,           0x56,           0,
-/* ----- 4             r               f               v               */
-/* d0 */ 0x19,         0x2e,           0x44,           0x57,
-/* ----- SPACE                         5               t               */
-/* d4 */ 0x68,         0,              0x1a,           0x2f,
-/* ----- g             b                               6               */
-/* d8 */ 0x45,         0x58,           0,              0x1b,
-/* ----- y             h               n                               */
-/* dc */ 0x30,         0x46,           0x59,           0,
-/* ----- 7             u               j               m               */
-/* e0 */ 0x1c,         0x31,           0x47,           0x5a,
-/* -----               8               i               k               */
-/* e4 */ 0,            0x1d,           0x32,           0x48,
-/* ----- ,                             9               o               */
-/* e8 */ 0x5b,         0,              0x1e,           0x33,
-/* ----- l             .                               0               */
-/* ec */ 0x49,         0x5c,           0,              0x1f,
-/* ----- p                             ;               /               */
-/* f0 */ 0x34,         0,              0x4a,           0x5d,
-/* -----               =               ]               \\/\'           */
-/* f4 */ 0,            0x21,           0x36,           0x4c,
-/* -----               -               [               \'              */
-/* f8 */ 0,            0x20,           0x35,           0x4b,
-/* -----                                                               */
-/* fc */ 0,            0,              0,              0,
-};
-
diff --git a/drivers/tc/lk201.c b/drivers/tc/lk201.c
deleted file mode 100644 (file)
index a90c255..0000000
+++ /dev/null
@@ -1,439 +0,0 @@
-/*
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999-2002 Harald Koerfgen <hkoerfg@web.de>
- * Copyright (C) 2001, 2002, 2003, 2004  Maciej W. Rozycki
- */
-
-
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kbd_ll.h>
-#include <linux/kbd_kern.h>
-#include <linux/vt_kern.h>
-
-#include <asm/keyboard.h>
-#include <asm/dec/tc.h>
-#include <asm/dec/machtype.h>
-#include <asm/dec/serial.h>
-
-#include "lk201.h"
-
-/*
- * Only handle DECstations that have an LK201 interface.
- * Maxine uses LK501 at the Access.Bus and various DECsystems
- * have no keyboard interface at all.
- */
-#define LK_IFACE       (mips_machtype == MACH_DS23100    || \
-                        mips_machtype == MACH_DS5000_200 || \
-                        mips_machtype == MACH_DS5000_1XX || \
-                        mips_machtype == MACH_DS5000_2X0)
-/*
- * These use the Z8530 SCC.  Others use the DZ11.
- */
-#define LK_IFACE_ZS    (mips_machtype == MACH_DS5000_1XX || \
-                        mips_machtype == MACH_DS5000_2X0)
-
-/* Simple translation table for the SysRq keys */
-
-#ifdef CONFIG_MAGIC_SYSRQ
-/*
- * Actually no translation at all, at least until we figure out
- * how to define SysRq for LK201 and friends. --macro
- */
-unsigned char lk201_sysrq_xlate[128];
-unsigned char *kbd_sysrq_xlate = lk201_sysrq_xlate;
-
-unsigned char kbd_sysrq_key = -1;
-#endif
-
-#define KEYB_LINE      3
-
-static int __init lk201_init(void *);
-static void __init lk201_info(void *);
-static void lk201_rx_char(unsigned char, unsigned char);
-
-static struct dec_serial_hook lk201_hook = {
-       .init_channel   = lk201_init,
-       .init_info      = lk201_info,
-       .rx_char        = NULL,
-       .poll_rx_char   = NULL,
-       .poll_tx_char   = NULL,
-       .cflags         = B4800 | CS8 | CSTOPB | CLOCAL,
-};
-
-/*
- * This is used during keyboard initialisation
- */
-static unsigned char lk201_reset_string[] = {
-       LK_CMD_SET_DEFAULTS,
-       LK_CMD_MODE(LK_MODE_RPT_DOWN, 1),
-       LK_CMD_MODE(LK_MODE_RPT_DOWN, 2),
-       LK_CMD_MODE(LK_MODE_RPT_DOWN, 3),
-       LK_CMD_MODE(LK_MODE_RPT_DOWN, 4),
-       LK_CMD_MODE(LK_MODE_DOWN_UP, 5),
-       LK_CMD_MODE(LK_MODE_DOWN_UP, 6),
-       LK_CMD_MODE(LK_MODE_RPT_DOWN, 7),
-       LK_CMD_MODE(LK_MODE_RPT_DOWN, 8),
-       LK_CMD_MODE(LK_MODE_RPT_DOWN, 9),
-       LK_CMD_MODE(LK_MODE_RPT_DOWN, 10),
-       LK_CMD_MODE(LK_MODE_RPT_DOWN, 11),
-       LK_CMD_MODE(LK_MODE_RPT_DOWN, 12),
-       LK_CMD_MODE(LK_MODE_DOWN, 13),
-       LK_CMD_MODE(LK_MODE_RPT_DOWN, 14),
-       LK_CMD_DIS_KEYCLK,
-       LK_CMD_ENB_BELL, LK_PARAM_VOLUME(4),
-};
-
-static void *lk201_handle;
-
-static int lk201_send(unsigned char ch)
-{
-       if (lk201_hook.poll_tx_char(lk201_handle, ch)) {
-               printk(KERN_ERR "lk201: transmit timeout\n");
-               return -EIO;
-       }
-       return 0;
-}
-
-static inline int lk201_get_id(void)
-{
-       return lk201_send(LK_CMD_REQ_ID);
-}
-
-static int lk201_reset(void)
-{
-       int i, r;
-
-       for (i = 0; i < sizeof(lk201_reset_string); i++) {
-               r = lk201_send(lk201_reset_string[i]);
-               if (r < 0)
-                       return r;
-       }
-       return 0;
-}
-
-static void lk201_report(unsigned char id[6])
-{
-       char *report = "lk201: keyboard attached, ";
-
-       switch (id[2]) {
-       case LK_STAT_PWRUP_OK:
-               printk(KERN_INFO "%sself-test OK\n", report);
-               break;
-       case LK_STAT_PWRUP_KDOWN:
-               /* The keyboard will resend the power-up ID
-                  after all keys are released, so we don't
-                  bother handling the error specially.  Still
-                  there may be a short-circuit inside.
-                */
-               printk(KERN_ERR "%skey down (stuck?), code: 0x%02x\n",
-                      report, id[3]);
-               break;
-       case LK_STAT_PWRUP_ERROR:
-               printk(KERN_ERR "%sself-test failure\n", report);
-               break;
-       default:
-               printk(KERN_ERR "%sunknown error: 0x%02x\n",
-                      report, id[2]);
-       }
-}
-
-static void lk201_id(unsigned char id[6])
-{
-       /*
-        * Report whether there is an LK201 or an LK401
-        * The LK401 has ALT keys...
-        */
-       switch (id[4]) {
-       case 1:
-               printk(KERN_INFO "lk201: LK201 detected\n");
-               break;
-       case 2:
-               printk(KERN_INFO "lk201: LK401 detected\n");
-               break;
-       case 3:
-               printk(KERN_INFO "lk201: LK443 detected\n");
-               break;
-       case 4:
-               printk(KERN_INFO "lk201: LK421 detected\n");
-               break;
-       default:
-               printk(KERN_WARNING
-                      "lk201: unknown keyboard detected, ID %d\n", id[4]);
-               printk(KERN_WARNING "lk201: ... please report to "
-                      "<linux-mips@linux-mips.org>\n");
-       }
-}
-
-#define DEFAULT_KEYB_REP_DELAY (250/5) /* [5ms] */
-#define DEFAULT_KEYB_REP_RATE  30      /* [cps] */
-
-static struct kbd_repeat kbdrate = {
-       DEFAULT_KEYB_REP_DELAY,
-       DEFAULT_KEYB_REP_RATE
-};
-
-static void parse_kbd_rate(struct kbd_repeat *r)
-{
-       if (r->delay <= 0)
-               r->delay = kbdrate.delay;
-       if (r->rate <= 0)
-               r->rate = kbdrate.rate;
-
-       if (r->delay < 5)
-               r->delay = 5;
-       if (r->delay > 630)
-               r->delay = 630;
-       if (r->rate < 12)
-               r->rate = 12;
-       if (r->rate > 127)
-               r->rate = 127;
-       if (r->rate == 125)
-               r->rate = 124;
-}
-
-static int write_kbd_rate(struct kbd_repeat *rep)
-{
-       int delay, rate;
-       int i;
-
-       delay = rep->delay / 5;
-       rate = rep->rate;
-       for (i = 0; i < 4; i++) {
-               if (lk201_hook.poll_tx_char(lk201_handle,
-                                           LK_CMD_RPT_RATE(i)))
-                       return 1;
-               if (lk201_hook.poll_tx_char(lk201_handle,
-                                           LK_PARAM_DELAY(delay)))
-                       return 1;
-               if (lk201_hook.poll_tx_char(lk201_handle,
-                                           LK_PARAM_RATE(rate)))
-                       return 1;
-       }
-       return 0;
-}
-
-static int lk201_kbd_rate(struct kbd_repeat *rep)
-{
-       if (rep == NULL)
-               return -EINVAL;
-
-       parse_kbd_rate(rep);
-
-       if (write_kbd_rate(rep)) {
-               memcpy(rep, &kbdrate, sizeof(struct kbd_repeat));
-               return -EIO;
-       }
-
-       memcpy(&kbdrate, rep, sizeof(struct kbd_repeat));
-
-       return 0;
-}
-
-static void lk201_kd_mksound(unsigned int hz, unsigned int ticks)
-{
-       if (!ticks)
-               return;
-
-       /*
-        * Can't set frequency and we "approximate"
-        * duration by volume. ;-)
-        */
-       ticks /= HZ / 32;
-       if (ticks > 7)
-               ticks = 7;
-       ticks = 7 - ticks;
-
-       if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_ENB_BELL))
-               return;
-       if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_VOLUME(ticks)))
-               return;
-       if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_BELL))
-               return;
-}
-
-void kbd_leds(unsigned char leds)
-{
-       unsigned char l = 0;
-
-       if (!lk201_handle)              /* FIXME */
-               return;
-
-       /* FIXME -- Only Hold and Lock LEDs for now. --macro */
-       if (leds & LED_SCR)
-               l |= LK_LED_HOLD;
-       if (leds & LED_CAP)
-               l |= LK_LED_LOCK;
-
-       if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_ON))
-               return;
-       if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(l)))
-               return;
-       if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_OFF))
-               return;
-       if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(~l)))
-               return;
-}
-
-int kbd_setkeycode(unsigned int scancode, unsigned int keycode)
-{
-       return -EINVAL;
-}
-
-int kbd_getkeycode(unsigned int scancode)
-{
-       return -EINVAL;
-}
-
-int kbd_translate(unsigned char scancode, unsigned char *keycode,
-                 char raw_mode)
-{
-       *keycode = scancode;
-       return 1;
-}
-
-char kbd_unexpected_up(unsigned char keycode)
-{
-       return 0x80;
-}
-
-static void lk201_rx_char(unsigned char ch, unsigned char fl)
-{
-       static unsigned char id[6];
-       static int id_i;
-
-       static int shift_state = 0;
-       static int prev_scancode;
-       unsigned char c = scancodeRemap[ch];
-
-       if (fl != TTY_NORMAL && fl != TTY_OVERRUN) {
-               printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n", fl);
-               return;
-       }
-
-       /* Assume this is a power-up ID. */
-       if (ch == LK_STAT_PWRUP_ID && !id_i) {
-               id[id_i++] = ch;
-               return;
-       }
-
-       /* Handle the power-up sequence. */
-       if (id_i) {
-               id[id_i++] = ch;
-               if (id_i == 4) {
-                       /* OK, the power-up concluded. */
-                       lk201_report(id);
-                       if (id[2] == LK_STAT_PWRUP_OK)
-                               lk201_get_id();
-                       else {
-                               id_i = 0;
-                               printk(KERN_ERR "lk201: keyboard power-up "
-                                      "error, skipping initialization\n");
-                       }
-               } else if (id_i == 6) {
-                       /* We got the ID; report it and start operation. */
-                       id_i = 0;
-                       lk201_id(id);
-                       lk201_reset();
-               }
-               return;
-       }
-
-       /* Everything else is a scancode/status response. */
-       id_i = 0;
-       switch (ch) {
-       case LK_STAT_RESUME_ERR:
-       case LK_STAT_ERROR:
-       case LK_STAT_INHIBIT_ACK:
-       case LK_STAT_TEST_ACK:
-       case LK_STAT_MODE_KEYDOWN:
-       case LK_STAT_MODE_ACK:
-               break;
-       case LK_KEY_LOCK:
-               shift_state ^= LK_LOCK;
-               handle_scancode(c, (shift_state & LK_LOCK) ? 1 : 0);
-               break;
-       case LK_KEY_SHIFT:
-               shift_state ^= LK_SHIFT;
-               handle_scancode(c, (shift_state & LK_SHIFT) ? 1 : 0);
-               break;
-       case LK_KEY_CTRL:
-               shift_state ^= LK_CTRL;
-               handle_scancode(c, (shift_state & LK_CTRL) ? 1 : 0);
-               break;
-       case LK_KEY_COMP:
-               shift_state ^= LK_COMP;
-               handle_scancode(c, (shift_state & LK_COMP) ? 1 : 0);
-               break;
-       case LK_KEY_RELEASE:
-               if (shift_state & LK_SHIFT)
-                       handle_scancode(scancodeRemap[LK_KEY_SHIFT], 0);
-               if (shift_state & LK_CTRL)
-                       handle_scancode(scancodeRemap[LK_KEY_CTRL], 0);
-               if (shift_state & LK_COMP)
-                       handle_scancode(scancodeRemap[LK_KEY_COMP], 0);
-               if (shift_state & LK_LOCK)
-                       handle_scancode(scancodeRemap[LK_KEY_LOCK], 0);
-               shift_state = 0;
-               break;
-       case LK_KEY_REPEAT:
-               handle_scancode(prev_scancode, 1);
-               break;
-       default:
-               prev_scancode = c;
-               handle_scancode(c, 1);
-               break;
-       }
-       tasklet_schedule(&keyboard_tasklet);
-}
-
-static void __init lk201_info(void *handle)
-{
-}
-
-static int __init lk201_init(void *handle)
-{
-       /* First install handlers. */
-       lk201_handle = handle;
-       kbd_rate = lk201_kbd_rate;
-       kd_mksound = lk201_kd_mksound;
-
-       lk201_hook.rx_char = lk201_rx_char;
-
-       /* Then just issue a reset -- the handlers will do the rest. */
-       lk201_send(LK_CMD_POWER_UP);
-
-       return 0;
-}
-
-void __init kbd_init_hw(void)
-{
-       /* Maxine uses LK501 at the Access.Bus. */
-       if (!LK_IFACE)
-               return;
-
-       printk(KERN_INFO "lk201: DECstation LK keyboard driver v0.05.\n");
-
-       if (LK_IFACE_ZS) {
-               /*
-                * kbd_init_hw() is being called before
-                * rs_init() so just register the kbd hook
-                * and let zs_init do the rest :-)
-                */
-               if (!register_dec_serial_hook(KEYB_LINE, &lk201_hook))
-                       unregister_dec_serial_hook(KEYB_LINE);
-       } else {
-               /*
-                * TODO: modify dz.c to allow similar hooks
-                * for LK201 handling on DS2100, DS3100, and DS5000/200
-                */
-               printk(KERN_ERR "lk201: support for DZ11 not yet ready.\n");
-       }
-}
diff --git a/drivers/tc/lk201.h b/drivers/tc/lk201.h
deleted file mode 100644 (file)
index 99f3203..0000000
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- *     Commands to the keyboard processor
- */
-
-#define LK_PARAM               0x80    /* start/end parameter list */
-
-#define LK_CMD_RESUME          0x8b    /* resume transmission to the host */
-#define LK_CMD_INHIBIT         0x89    /* stop transmission to the host */
-#define LK_CMD_LEDS_ON         0x13    /* light LEDs */
-                                       /* 1st param: led bitmask */
-#define LK_CMD_LEDS_OFF                0x11    /* turn off LEDs */
-                                       /* 1st param: led bitmask */
-#define LK_CMD_DIS_KEYCLK      0x99    /* disable the keyclick */
-#define LK_CMD_ENB_KEYCLK      0x1b    /* enable the keyclick */
-                                       /* 1st param: volume */
-#define LK_CMD_DIS_CTLCLK      0xb9    /* disable the Ctrl keyclick */
-#define LK_CMD_ENB_CTLCLK      0xbb    /* enable the Ctrl keyclick */
-#define LK_CMD_SOUND_CLK       0x9f    /* emit a keyclick */
-#define LK_CMD_DIS_BELL                0xa1    /* disable the bell */
-#define LK_CMD_ENB_BELL                0x23    /* enable the bell */
-                                       /* 1st param: volume */
-#define LK_CMD_BELL            0xa7    /* emit a bell */
-#define LK_CMD_TMP_NORPT       0xd1    /* disable typematic */
-                                       /* for the currently pressed key */
-#define LK_CMD_ENB_RPT         0xe3    /* enable typematic */
-                                       /* for RPT_DOWN groups */
-#define LK_CMD_DIS_RPT         0xe1    /* disable typematic */
-                                       /* for RPT_DOWN groups */
-#define LK_CMD_RPT_TO_DOWN     0xd9    /* set RPT_DOWN groups to DOWN */
-#define LK_CMD_REQ_ID          0xab    /* request the keyboard ID */
-#define LK_CMD_POWER_UP                0xfd    /* init power-up sequence */
-#define LK_CMD_TEST_MODE       0xcb    /* enter the factory test mode */
-#define LK_CMD_TEST_EXIT       0x80    /* exit the factory test mode */
-#define LK_CMD_SET_DEFAULTS    0xd3    /* set power-up defaults */
-
-#define LK_CMD_MODE(m,div)     (LK_PARAM|(((div)&0xf)<<3)|(((m)&0x3)<<1))
-                                       /* select the repeat mode */
-                                       /* for the selected key group */
-#define LK_CMD_MODE_AR(m,div)  ((((div)&0xf)<<3)|(((m)&0x3)<<1))
-                                       /* select the repeat mode */
-                                       /* and the repeat register */
-                                       /* for the selected key group */
-                                       /* 1st param: register number */
-#define LK_CMD_RPT_RATE(r)     (0x78|(((r)&0x3)<<1))
-                                       /* set the delay and repeat rate */
-                                       /* for the selected repeat register */
-                                       /* 1st param: initial delay */
-                                       /* 2nd param: repeat rate */
-
-/* there are 4 leds, represent them in the low 4 bits of a byte */
-#define LK_PARAM_LED_MASK(ledbmap)     (LK_PARAM|((ledbmap)&0xf))
-#define LK_LED_WAIT            0x1     /* Wait LED */
-#define LK_LED_COMP            0x2     /* Compose LED */
-#define LK_LED_LOCK            0x4     /* Lock LED */
-#define LK_LED_HOLD            0x8     /* Hold Screen LED */
-
-/* max volume is 0, lowest is 0x7 */
-#define LK_PARAM_VOLUME(v)             (LK_PARAM|((v)&0x7))
-
-/* mode set command details, div is a key group number */
-#define LK_MODE_DOWN           0x0     /* make only */
-#define LK_MODE_RPT_DOWN       0x1     /* make and typematic */
-#define LK_MODE_DOWN_UP                0x3     /* make and release */
-
-/* there are 4 repeat registers */
-#define LK_PARAM_AR(r)         (LK_PARAM|((v)&0x3))
-
-/*
- * Mappings between key groups and keycodes are as follows:
- *
- *  1: 0xbf - 0xff -- alphanumeric,
- *  2: 0x91 - 0xa5 -- numeric keypad,
- *  3: 0xbc        -- Backspace,
- *  4: 0xbd - 0xbe -- Tab, Return,
- *  5: 0xb0 - 0xb2 -- Lock, Compose Character,
- *  6: 0xad - 0xaf -- Ctrl, Shift,
- *  7: 0xa6 - 0xa8 -- Left Arrow, Right Arrow,
- *  8: 0xa9 - 0xac -- Up Arrow, Down Arrow, Right Shift,
- *  9: 0x88 - 0x90 -- editor keypad,
- * 10: 0x56 - 0x62 -- F1 - F5,
- * 11: 0x63 - 0x6e -- F6 - F10,
- * 12: 0x6f - 0x7a -- F11 - F14,
- * 13: 0x7b - 0x7d -- Help, Do,
- * 14: 0x7e - 0x87 -- F17 - F20.
- *
- * Notes:
- * 1. Codes in the 0x00 - 0x40 range are reserved.
- * 2. The assignment of the 0x41 - 0x55 range is undiscovered, probably 10.
- */
-
-/* delay is 5 - 630 ms; 0x00 and 0x7f are reserved */
-#define LK_PARAM_DELAY(t)      ((t)&0x7f)
-
-/* rate is 12 - 127 Hz; 0x00 - 0x0b and 0x7d (power-up!) are reserved */
-#define LK_PARAM_RATE(r)       (LK_PARAM|((r)&0x7f))
-
-#define LK_SHIFT 1<<0
-#define LK_CTRL 1<<1
-#define LK_LOCK 1<<2
-#define LK_COMP 1<<3
-
-#define LK_KEY_SHIFT           0xae
-#define LK_KEY_CTRL            0xaf
-#define LK_KEY_LOCK            0xb0
-#define LK_KEY_COMP            0xb1
-
-#define LK_KEY_RELEASE         0xb3    /* all keys released */
-#define LK_KEY_REPEAT          0xb4    /* repeat the last key */
-
-/* status responses */
-#define LK_STAT_RESUME_ERR     0xb5    /* keystrokes lost while inhibited */
-#define LK_STAT_ERROR          0xb6    /* an invalid command received */
-#define LK_STAT_INHIBIT_ACK    0xb7    /* transmission inhibited */
-#define LK_STAT_TEST_ACK       0xb8    /* the factory test mode entered */
-#define LK_STAT_MODE_KEYDOWN   0xb9    /* a key is down on a change */
-                                       /* to the DOWN_UP mode; */
-                                       /* the keycode follows */
-#define LK_STAT_MODE_ACK       0xba    /* the mode command succeeded */
-
-#define LK_STAT_PWRUP_ID       0x01    /* the power-up response start mark */
-#define LK_STAT_PWRUP_OK       0x00    /* the power-up self test OK */
-#define LK_STAT_PWRUP_KDOWN    0x3d    /* a key was down during the test */
-#define LK_STAT_PWRUP_ERROR    0x3e    /* keyboard self test failure */
-
-extern unsigned char scancodeRemap[256];