i40e: Add set_pauseparam to ethtool
authorCatherine Sullivan <catherine.sullivan@intel.com>
Wed, 4 Jun 2014 08:45:27 +0000 (08:45 +0000)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Thu, 3 Jul 2014 02:02:22 +0000 (19:02 -0700)
Add i40e implementation of setpauseparam to ethtool.

Change-ID: Ie7766b2091ec8f934737573c9ffd426081966718
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/ethernet/intel/i40e/i40e_ethtool.c

index 6508a1b64a7ebc5f5f4427b20587bf3fe4666dd3..fc86761950d0fd01fd376df6804dc20c670ddca3 100644 (file)
@@ -457,6 +457,81 @@ static void i40e_get_pauseparam(struct net_device *netdev,
        }
 }
 
+/**
+ * i40e_set_pauseparam - Set Flow Control parameter
+ * @netdev: network interface device structure
+ * @pause: return tx/rx flow control status
+ **/
+static int i40e_set_pauseparam(struct net_device *netdev,
+                              struct ethtool_pauseparam *pause)
+{
+       struct i40e_netdev_priv *np = netdev_priv(netdev);
+       struct i40e_pf *pf = np->vsi->back;
+       struct i40e_vsi *vsi = np->vsi;
+       struct i40e_hw *hw = &pf->hw;
+       struct i40e_link_status *hw_link_info = &hw->phy.link_info;
+       bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP;
+       i40e_status status;
+       u8 aq_failures;
+       int err;
+
+       if (vsi != pf->vsi[pf->lan_vsi])
+               return -EOPNOTSUPP;
+
+       if (pause->autoneg != ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
+           AUTONEG_ENABLE : AUTONEG_DISABLE)) {
+               netdev_info(netdev, "To change autoneg please use: ethtool -s <dev> autoneg <on|off>\n");
+               return -EOPNOTSUPP;
+       }
+
+       /* If we have link and don't have autoneg */
+       if (!test_bit(__I40E_DOWN, &pf->state) &&
+           !(hw_link_info->an_info & I40E_AQ_AN_COMPLETED)) {
+               /* Send message that it might not necessarily work*/
+               netdev_info(netdev, "Autoneg did not complete so changing settings may not result in an actual change.\n");
+       }
+
+       if (hw->fc.current_mode == I40E_FC_PFC) {
+               netdev_info(netdev, "Priority flow control enabled. Cannot set link flow control.\n");
+               return -EOPNOTSUPP;
+       }
+
+       if (pause->rx_pause && pause->tx_pause)
+               hw->fc.requested_mode = I40E_FC_FULL;
+       else if (pause->rx_pause && !pause->tx_pause)
+               hw->fc.requested_mode = I40E_FC_RX_PAUSE;
+       else if (!pause->rx_pause && pause->tx_pause)
+               hw->fc.requested_mode = I40E_FC_TX_PAUSE;
+       else if (!pause->rx_pause && !pause->tx_pause)
+               hw->fc.requested_mode = I40E_FC_NONE;
+       else
+                return -EINVAL;
+
+       /* Set the fc mode and only restart an if link is up*/
+       status = i40e_set_fc(hw, &aq_failures, link_up);
+
+       if (aq_failures & I40E_SET_FC_AQ_FAIL_GET) {
+               netdev_info(netdev, "Set fc failed on the get_phy_capabilities call with error %d and status %d\n",
+                           status, hw->aq.asq_last_status);
+               err = -EAGAIN;
+       }
+       if (aq_failures & I40E_SET_FC_AQ_FAIL_SET) {
+               netdev_info(netdev, "Set fc failed on the set_phy_config call with error %d and status %d\n",
+                           status, hw->aq.asq_last_status);
+               err = -EAGAIN;
+       }
+       if (aq_failures & I40E_SET_FC_AQ_FAIL_UPDATE) {
+               netdev_info(netdev, "Set fc failed on the update_link_info call with error %d and status %d\n",
+                           status, hw->aq.asq_last_status);
+               err = -EAGAIN;
+       }
+
+       if (!test_bit(__I40E_DOWN, &pf->state))
+               return i40e_nway_reset(netdev);
+
+       return err;
+}
+
 static u32 i40e_get_msglevel(struct net_device *netdev)
 {
        struct i40e_netdev_priv *np = netdev_priv(netdev);
@@ -1866,6 +1941,7 @@ static const struct ethtool_ops i40e_ethtool_ops = {
        .get_ringparam          = i40e_get_ringparam,
        .set_ringparam          = i40e_set_ringparam,
        .get_pauseparam         = i40e_get_pauseparam,
+       .set_pauseparam         = i40e_set_pauseparam,
        .get_msglevel           = i40e_get_msglevel,
        .set_msglevel           = i40e_set_msglevel,
        .get_rxnfc              = i40e_get_rxnfc,