ARM: ux500: register LP5521 LEDs in the device tree

Based on pending device tree support in the LP55xx drivers
we can add the correct LED and channel configuration from the
ux500 device tree for all HREF variants.

Cc: Bryan Wu <cooloney@gmail.com>
Acked-by: Milo Kim <Milo.Kim@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
index 62523f67e01aae87be22388e00c81c00428ade4d..e3154296c39a85767326aaa76cdf09915e6a5be7 100644 (file)
--- a/arch/arm/boot/dts/href.dtsi
+++ b/arch/arm/boot/dts/href.dtsi
@@ -63,16 +63,42 @@
                };
 
                i2c@80128000 {
-                       lp5521@0x33 {
-                               compatible = "lp5521";
+                       lp5521@33 {
+                               compatible = "national,lp5521";
                                reg = <0x33>;
+                               label = "lp5521_pri";
+                               clock-mode = /bits/ 8 <2>;
+                               chan0 {
+                                       led-cur = /bits/ 8 <0x2f>;
+                                       max-cur = /bits/ 8 <0x5f>;
+                               };
+                               chan1 {
+                                       led-cur = /bits/ 8 <0x2f>;
+                                       max-cur = /bits/ 8 <0x5f>;
+                               };
+                               chan2 {
+                                       led-cur = /bits/ 8 <0x2f>;
+                                       max-cur = /bits/ 8 <0x5f>;
+                               };
                        };
-
-                       lp5521@0x34 {
-                               compatible = "lp5521";
+                       lp5521@34 {
+                               compatible = "national,lp5521";
                                reg = <0x34>;
+                               label = "lp5521_sec";
+                               clock-mode = /bits/ 8 <2>;
+                               chan0 {
+                                       led-cur = /bits/ 8 <0x2f>;
+                                       max-cur = /bits/ 8 <0x5f>;
+                               };
+                               chan1 {
+                                       led-cur = /bits/ 8 <0x2f>;
+                                       max-cur = /bits/ 8 <0x5f>;
+                               };
+                               chan2 {
+                                       led-cur = /bits/ 8 <0x2f>;
+                                       max-cur = /bits/ 8 <0x5f>;
+                               };
                        };
-
                        bh1780@0x29 {
                                compatible = "rohm,bh1780gli";
                                reg = <0x33>;