ARM: dts: add Armadeus Systems OPOS6UL and OPOS6ULDEV support
authorSébastien Szymanski <sebastien.szymanski@armadeus.com>
Tue, 10 Jan 2017 13:32:53 +0000 (14:32 +0100)
committerShawn Guo <shawnguo@kernel.org>
Mon, 23 Jan 2017 07:02:17 +0000 (15:02 +0800)
OPOS6UL is an i.MX6UL based SoM.
OPOS6ULDev is a carrier board for the OPOS6UL SoM.

For more details see:
http://www.opossom.com/english/products-processor_boards-opos6ul.html
http://www.opossom.com/english/products-development_boards-opos6ul_dev.html

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/imx6ul-opos6ul.dtsi [new file with mode: 0644]
arch/arm/boot/dts/imx6ul-opos6uldev.dts [new file with mode: 0644]

index ef5f9db6a3fb2f5693dafb356a3986a5ad093b67..6076cb485c8ee665cccbad79e9a51f3c5dd3019c 100644 (file)
@@ -440,6 +440,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
        imx6ul-geam-kit.dtb \
        imx6ul-isiot.dtb \
        imx6ul-liteboard.dtb \
+       imx6ul-opos6uldev.dtb \
        imx6ul-pico-hobbit.dtb \
        imx6ul-tx6ul-0010.dtb \
        imx6ul-tx6ul-0011.dtb \
diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
new file mode 100644 (file)
index 0000000..51095df
--- /dev/null
@@ -0,0 +1,192 @@
+/*
+ * Copyright 2017 Armadeus Systems <support@armadeus.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6ul.dtsi"
+
+/ {
+       memory {
+               reg = <0x80000000 0>; /* will be filled by U-Boot */
+       };
+
+       reg_3v3: regulator-3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "3V3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+       };
+
+       usdhc3_pwrseq: usdhc3-pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+       };
+};
+
+&fec1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_enet1>;
+       phy-mode = "rmii";
+       phy-reset-duration = <1>;
+       phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+       phy-handle = <&ethphy1>;
+       phy-supply = <&reg_3v3>;
+       status = "okay";
+
+       mdio: mdio {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               ethphy1: ethernet-phy@1 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       reg = <1>;
+                       interrupt-parent = <&gpio4>;
+                       interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+                       status = "okay";
+               };
+       };
+};
+
+/* Bluetooth */
+&uart8 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart8>;
+       uart-has-rtscts;
+       status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc1>;
+       bus-width = <8>;
+       no-1-8-v;
+       non-removable;
+       status = "okay";
+};
+
+/* WiFi */
+&usdhc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc2>;
+       bus-width = <4>;
+       no-1-8-v;
+       non-removable;
+       mmc-pwrseq = <&usdhc3_pwrseq>;
+       status = "okay";
+
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       brcmf: bcrmf@1 {
+               compatible = "brcm,bcm4329-fmac";
+               reg = <1>;
+               interrupt-parent = <&gpio2>;
+               interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-names = "host-wake";
+       };
+};
+
+&iomuxc {
+       pinctrl_enet1: enet1grp {
+               fsl,pins = <
+                       MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
+                       MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x1b0b0
+                       MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x130b0
+                       MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x130b0
+                       MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0
+                       MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0
+                       MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+                       MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+                       MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+                       /* INT# */
+                       MX6UL_PAD_NAND_DQS__GPIO4_IO16          0x1b0b0
+                       /* RST# */
+                       MX6UL_PAD_NAND_DATA00__GPIO4_IO02       0x130b0
+                       MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b031
+               >;
+       };
+
+       pinctrl_uart8: uart8grp {
+               fsl,pins = <
+                       MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX     0x1b0b0
+                       MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX  0x1b0b0
+                       MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS    0x1b0b0
+                       MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS   0x1b0b0
+                       /* BT_REG_ON */
+                       MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10       0x130b0
+               >;
+       };
+
+       pinctrl_usdhc1: usdhc1grp {
+               fsl,pins = <
+                       MX6UL_PAD_SD1_CMD__USDHC1_CMD           0x17059
+                       MX6UL_PAD_SD1_CLK__USDHC1_CLK           0x10059
+                       MX6UL_PAD_SD1_DATA0__USDHC1_DATA0       0x17059
+                       MX6UL_PAD_SD1_DATA1__USDHC1_DATA1       0x17059
+                       MX6UL_PAD_SD1_DATA2__USDHC1_DATA2       0x17059
+                       MX6UL_PAD_SD1_DATA3__USDHC1_DATA3       0x17059
+                       MX6UL_PAD_NAND_READY_B__USDHC1_DATA4    0x17059
+                       MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5      0x17059
+                       MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6      0x17059
+                       MX6UL_PAD_NAND_CLE__USDHC1_DATA7        0x17059
+               >;
+       };
+
+       pinctrl_usdhc2: usdhc2grp {
+               fsl,pins = <
+                       MX6UL_PAD_LCD_DATA18__USDHC2_CMD        0x1b0b0
+                       MX6UL_PAD_LCD_DATA19__USDHC2_CLK        0x100b0
+                       MX6UL_PAD_LCD_DATA20__USDHC2_DATA0      0x1b0b0
+                       MX6UL_PAD_LCD_DATA21__USDHC2_DATA1      0x1b0b0
+                       MX6UL_PAD_LCD_DATA22__USDHC2_DATA2      0x1b0b0
+                       MX6UL_PAD_LCD_DATA23__USDHC2_DATA3      0x1b0b0
+                       /* WL_REG_ON */
+                       MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09    0x130b0
+                       /* WL_IRQ */
+                       MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08    0x1b0b0
+               >;
+       };
+};
diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
new file mode 100644 (file)
index 0000000..0e59ee5
--- /dev/null
@@ -0,0 +1,412 @@
+/*
+ * Copyright 2017 Armadeus Systems <support@armadeus.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul-opos6ul.dtsi"
+
+/ {
+       model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board";
+       compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
+
+       chosen {
+               stdout-path = &uart1;
+       };
+
+       backlight {
+               compatible = "pwm-backlight";
+               pwms = <&pwm3 0 191000>;
+               brightness-levels = <0 4 8 16 32 64 128 255>;
+               default-brightness-level = <7>;
+               power-supply = <&reg_5v>;
+               status = "okay";
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_gpio_keys>;
+
+               user-button {
+                       label = "User button";
+                       gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_MISC>;
+                       wakeup-source;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               user-led {
+                       label = "User";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_led>;
+                       gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "heartbeat";
+               };
+       };
+
+       onewire {
+               compatible = "w1-gpio";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_w1>;
+               gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+       };
+
+       reg_5v: regulator-5v {
+               compatible = "regulator-fixed";
+               regulator-name = "5V";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+       };
+
+       reg_usbotg1_vbus: regulator-usbotg1vbus {
+               compatible = "regulator-fixed";
+               regulator-name = "usbotg1vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+               gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+       reg_usbotg2_vbus: regulator-usbotg2vbus {
+               compatible = "regulator-fixed";
+               regulator-name = "usbotg2vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_usbotg2_vbus>;
+               gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+};
+
+&adc1 {
+       vref-supply = <&reg_3v3>;
+       status = "okay";
+};
+
+&can1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_flexcan1>;
+       xceiver-supply = <&reg_5v>;
+       status = "okay";
+};
+
+&can2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_flexcan2>;
+       xceiver-supply = <&reg_5v>;
+       status = "okay";
+};
+
+&ecspi4 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ecspi4>;
+       cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
+       status = "okay";
+
+       spidev0: spi@0 {
+               compatible = "spidev";
+               reg = <0>;
+               spi-max-frequency = <5000000>;
+       };
+
+       spidev1: spi@1 {
+               compatible = "spidev";
+               reg = <1>;
+               spi-max-frequency = <5000000>;
+       };
+};
+
+&i2c1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c1>;
+       clock_frequency = <400000>;
+       status = "okay";
+};
+
+&i2c2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c2>;
+       clock_frequency = <400000>;
+       status = "okay";
+};
+
+&lcdif {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_lcdif>;
+       display = <&display0>;
+       lcd-supply = <&reg_3v3>;
+       status = "okay";
+
+       display0: display0 {
+               bits-per-pixel = <32>;
+               bus-width = <18>;
+
+               display-timings {
+                       timing0: timing0 {
+                               clock-frequency = <33000033>;
+                               hactive = <800>;
+                               vactive = <480>;
+                               hback-porch = <96>;
+                               hfront-porch = <96>;
+                               vback-porch = <20>;
+                               vfront-porch = <21>;
+                               hsync-len = <64>;
+                               vsync-len = <4>;
+                               de-active = <1>;
+                               pixelclk-active = <0>;
+                       };
+               };
+       };
+};
+
+&pwm3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm3>;
+       status = "okay";
+};
+
+&snvs_pwrkey {
+       status = "disabled";
+};
+
+&tsc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_tsc>;
+       xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+       measure-delay-time = <0xffff>;
+       pre-charge-time = <0xffff>;
+       status = "okay";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
+       status = "okay";
+};
+
+&usbotg1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usbotg1_id>;
+       vbus-supply = <&reg_usbotg1_vbus>;
+       dr_mode = "otg";
+       disable-over-current;
+       status = "okay";
+};
+
+&usbotg2 {
+       vbus-supply = <&reg_usbotg2_vbus>;
+       dr_mode = "host";
+       disable-over-current;
+       status = "okay";
+};
+
+&iomuxc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_gpios>;
+
+       pinctrl_ecspi4: ecspi4grp {
+               fsl,pins = <
+                       MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK      0x1b0b0
+                       MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI      0x1b0b0
+                       MX6UL_PAD_NAND_DATA06__ECSPI4_MISO      0x1b0b0
+                       MX6UL_PAD_NAND_DATA01__GPIO4_IO03       0x1b0b0
+                       MX6UL_PAD_NAND_DATA07__GPIO4_IO09       0x1b0b0
+               >;
+       };
+
+       pinctrl_flexcan1: flexcan1grp {
+               fsl,pins = <
+                       MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX      0x0b0b0
+                       MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX      0x0b0b0
+               >;
+       };
+
+       pinctrl_flexcan2: flexcan2grp {
+               fsl,pins = <
+                       MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX      0x0b0b0
+                       MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX      0x0b0b0
+               >;
+       };
+
+       pinctrl_gpios: gpiosgrp {
+               fsl,pins = <
+                       MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x0b0b0
+                       MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25     0x0b0b0
+                       MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24     0x0b0b0
+                       MX6UL_PAD_NAND_RE_B__GPIO4_IO00         0x0b0b0
+                       MX6UL_PAD_GPIO1_IO08__GPIO1_IO08        0x0b0b0
+                       MX6UL_PAD_UART1_CTS_B__GPIO1_IO18       0x0b0b0
+                       MX6UL_PAD_UART1_RTS_B__GPIO1_IO19       0x0b0b0
+                       MX6UL_PAD_NAND_WE_B__GPIO4_IO01         0x0b0b0
+                       MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x0b0b0
+                       MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02      0x0b0b0
+                       MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03      0x0b0b0
+                       MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04      0x0b0b0
+                       MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05      0x0b0b0
+                       MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06      0x0b0b0
+                       MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07      0x0b0b0
+                       MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08      0x0b0b0
+               >;
+       };
+
+       pinctrl_gpio_keys: gpiokeysgrp {
+               fsl,pins = <
+                       MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11    0x0b0b0
+               >;
+       };
+
+       pinctrl_i2c1: i2c1grp {
+               fsl,pins = <
+                       MX6UL_PAD_UART4_RX_DATA__I2C1_SDA       0x4001b8b0
+                       MX6UL_PAD_UART4_TX_DATA__I2C1_SCL       0x4001b8b0
+               >;
+       };
+
+       pinctrl_i2c2: i2c2grp {
+               fsl,pins = <
+                       MX6UL_PAD_UART5_RX_DATA__I2C2_SDA       0x4001b8b0
+                       MX6UL_PAD_UART5_TX_DATA__I2C2_SCL       0x4001b8b0
+               >;
+       };
+
+       pinctrl_lcdif: lcdifgrp {
+               fsl,pins = <
+                       MX6UL_PAD_LCD_CLK__LCDIF_CLK        0x100b1
+                       MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x100b1
+                       MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x100b1
+                       MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x100b1
+                       MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x100b1
+                       MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x100b1
+                       MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x100b1
+                       MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x100b1
+                       MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x100b1
+                       MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x100b1
+                       MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x100b1
+                       MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x100b1
+                       MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x100b1
+                       MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x100b1
+                       MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x100b1
+                       MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x100b1
+                       MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x100b1
+                       MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x100b1
+                       MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x100b1
+                       MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x100b1
+                       MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x100b1
+                       MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x100b1
+               >;
+       };
+
+       pinctrl_led: ledgrp {
+               fsl,pins = <
+                       MX6UL_PAD_LCD_RESET__GPIO3_IO04         0x0b0b0
+               >;
+       };
+
+       pinctrl_pwm3: pwm3grp {
+               fsl,pins = <
+                       MX6UL_PAD_NAND_ALE__PWM3_OUT            0x1b0b0
+               >;
+       };
+
+       pinctrl_tsc: tscgrp {
+               fsl,pins = <
+                       MX6UL_PAD_GPIO1_IO01__GPIO1_IO01       0xb0
+                       MX6UL_PAD_GPIO1_IO02__GPIO1_IO02       0xb0
+                       MX6UL_PAD_GPIO1_IO03__GPIO1_IO03       0xb0
+                       MX6UL_PAD_GPIO1_IO04__GPIO1_IO04       0xb0
+               >;
+       };
+
+       pinctrl_uart1: uart1grp {
+               fsl,pins = <
+                       MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX   0x1b0b1
+                       MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX   0x1b0b1
+               >;
+       };
+
+       pinctrl_uart2: uart2grp {
+               fsl,pins = <
+                       MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX   0x1b0b1
+                       MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX   0x1b0b1
+               >;
+       };
+
+       pinctrl_usbotg1_id: usbotg1idgrp {
+               fsl,pins = <
+                       MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID    0x1b0b0
+               >;
+       };
+
+       pinctrl_usbotg1_vbus: usbotg1vbusgrp {
+               fsl,pins = <
+                       MX6UL_PAD_GPIO1_IO05__GPIO1_IO05        0x1b0b0
+               >;
+       };
+
+       pinctrl_usbotg2_vbus: usbotg2vbusgrp {
+               fsl,pins = <
+                       MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
+               >;
+       };
+
+       pinctrl_w1: w1grp {
+               fsl,pins = <
+                       MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01      0x0b0b0
+               >;
+       };
+};