press of a button.
When read, this file returns the raw number of the actual cpi
setting reported by the mouse. This number has to be further
- processed to receive the real dpi value.
+ processed to receive the real dpi value:
VALUE DPI
1 400
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Get the ALS output channel used as input in
- ALS-current-control mode (0, 1), where
+ ALS-current-control mode (0, 1), where:
0 - out_current0 (backlight 0)
1 - out_current1 (backlight 1)
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
- Set the brightness-mapping mode (0, 1), where
+ Set the brightness-mapping mode (0, 1), where:
0 - exponential mode
1 - linear mode
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
- Set the PWM-input control mask (5 bits), where
+ Set the PWM-input control mask (5 bits), where:
bit 5 - PWM-input enabled in Zone 4
bit 4 - PWM-input enabled in Zone 3
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Set the ALS output channel to use as input in
- ALS-current-control mode (1, 2), where
+ ALS-current-control mode (1, 2), where:
1 - out_current1
2 - out_current2
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
- Set the pattern generator fall and rise times (0..7), where
+ Set the pattern generator fall and rise times (0..7), where:
0 - 2048 us
1 - 262 ms
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
- Set the brightness-mapping mode (0, 1), where
+ Set the brightness-mapping mode (0, 1), where:
0 - exponential mode
1 - linear mode
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
- Set the PWM-input control mask (5 bits), where
+ Set the PWM-input control mask (5 bits), where:
bit 5 - PWM-input enabled in Zone 4
bit 4 - PWM-input enabled in Zone 3
Description:
Set the mode of LEDs. You should notice that changing the mode
of one LED will update the mode of its two sibling devices as
- well.
+ well. Possible values are:
0 - normal
1 - audio
Normal: LEDs are fully on when enabled
Audio: LEDs brightness depends on sound level
- Breathing: LEDs brightness varies at human breathing rate
\ No newline at end of file
+ Breathing: LEDs brightness varies at human breathing rate
press of a button.
When read, this file returns the raw number of the actual dpi
setting reported by the mouse. This number has to be further
- processed to receive the real dpi value.
+ processed to receive the real dpi value:
VALUE DPI
1 800