- int retval = 0;
- pci_power_t state = dev->current_state;
-
-#ifdef CONFIG_PPC_PMAC
- /* Reenable ASIC clocks for USB */
- if (machine_is(powermac)) {
- struct device_node *of_node;
-
- of_node = pci_device_to_OF_node(dev);
- if (of_node)
- pmac_call_feature(PMAC_FTR_USB_ENABLE,
- of_node, 0, 1);
- }
-#endif
-
- /* NOTE: chip docs cover clean "real suspend" cases (what Linux
- * calls "standby", "suspend to RAM", and so on). There are also
- * dirty cases when swsusp fakes a suspend in "shutdown" mode.
- */
- if (state != PCI_D0) {
-#ifdef DEBUG
- int pci_pm;
- u16 pmcr;
-
- pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
- pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr);
- pmcr &= PCI_PM_CTRL_STATE_MASK;
- if (pmcr) {
- /* Clean case: power to USB and to HC registers was
- * maintained; remote wakeup is easy.
- */
- dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr);
- } else {
- /* Clean: HC lost Vcc power, D0 uninitialized
- * + Vaux may have preserved port and transceiver
- * state ... for remote wakeup from D3cold
- * + or not; HCD must reinit + re-enumerate
- *
- * Dirty: D0 semi-initialized cases with swsusp
- * + after BIOS init
- * + after Linux init (HCD statically linked)
- */
- dev_dbg(&dev->dev, "resume from previous PCI D%d\n",
- state);
- }
-#endif
-
- retval = pci_set_power_state(dev, PCI_D0);
- } else {
- /* Same basic cases: clean (powered/not), dirty */
- dev_dbg(&dev->dev, "PCI legacy resume\n");
- }
-
- if (retval < 0)
- dev_err(&dev->dev, "can't resume: %d\n", retval);
- else
- pci_restore_state(dev);
-
- return retval;