X-Git-Url: http://git.samba.org/samba.git/?a=blobdiff_plain;f=arch%2Fpowerpc%2Fplatforms%2Fchrp%2Fsetup.c;h=18d89f38796b458d9953b93672893c528b537acf;hb=7c8ce71b092425f1e938285cab2a679c09444d9b;hp=8bf4307e323df5c58c5dc7f27204101829f8690b;hpb=a00428f5b149e36b8225b2a0812742a6dfb07b8c;p=sfrench%2Fcifs-2.6.git diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 8bf4307e323d..18d89f38796b 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -61,6 +62,10 @@ EXPORT_SYMBOL(_chrp_type); struct mpic *chrp_mpic; +/* Used for doing CHRP event-scans */ +DEFINE_PER_CPU(struct timer_list, heartbeat_timer); +unsigned long event_scan_interval; + /* * XXX this should be in xmon.h, but putting it there means xmon.h * has to include (to get irqreturn_t), which @@ -229,8 +234,6 @@ void __init chrp_setup_arch(void) { struct device_node *root = find_path_device ("/"); char *machine = NULL; - struct device_node *device; - unsigned int *p = NULL; /* init to some ~sane value until calibrate_delay() runs */ loops_per_jiffy = 50000000/HZ; @@ -287,23 +290,12 @@ void __init chrp_setup_arch(void) */ sio_init(); - /* Get the event scan rate for the rtas so we know how - * often it expects a heartbeat. -- Cort - */ - device = find_devices("rtas"); - if (device) - p = (unsigned int *) get_property - (device, "rtas-event-scan-rate", NULL); - if (p && *p) { - ppc_md.heartbeat = chrp_event_scan; - ppc_md.heartbeat_reset = HZ / (*p * 30) - 1; - ppc_md.heartbeat_count = 1; - printk("RTAS Event Scan Rate: %u (%lu jiffies)\n", - *p, ppc_md.heartbeat_reset); - } - pci_create_OF_bus_map(); +#ifdef CONFIG_SMP + smp_ops = &chrp_smp_ops; +#endif /* CONFIG_SMP */ + /* * Print the banner, then scroll down so boot progress * can be printed. -- Cort @@ -312,7 +304,7 @@ void __init chrp_setup_arch(void) } void -chrp_event_scan(void) +chrp_event_scan(unsigned long unused) { unsigned char log[1024]; int ret = 0; @@ -320,7 +312,8 @@ chrp_event_scan(void) /* XXX: we should loop until the hardware says no more error logs -- Cort */ rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0, __pa(log), 1024); - ppc_md.heartbeat_count = ppc_md.heartbeat_reset; + mod_timer(&__get_cpu_var(heartbeat_timer), + jiffies + event_scan_interval); } /* @@ -447,8 +440,6 @@ void __init chrp_init_IRQ(void) if (_chrp_type == _CHRP_Pegasos) ppc_md.get_irq = i8259_irq; - else - ppc_md.get_irq = mpic_get_irq; #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) /* see if there is a keyboard in the device tree @@ -465,6 +456,9 @@ void __init chrp_init_IRQ(void) void __init chrp_init2(void) { + struct device_node *device; + unsigned int *p = NULL; + #ifdef CONFIG_NVRAM chrp_nvram_init(); #endif @@ -476,12 +470,53 @@ chrp_init2(void) request_region(0x80,0x10,"dma page reg"); request_region(0xc0,0x20,"dma2"); + /* Get the event scan rate for the rtas so we know how + * often it expects a heartbeat. -- Cort + */ + device = find_devices("rtas"); + if (device) + p = (unsigned int *) get_property + (device, "rtas-event-scan-rate", NULL); + if (p && *p) { + /* + * Arrange to call chrp_event_scan at least *p times + * per minute. We use 59 rather than 60 here so that + * the rate will be slightly higher than the minimum. + * This all assumes we don't do hotplug CPU on any + * machine that needs the event scans done. + */ + unsigned long interval, offset; + int cpu, ncpus; + struct timer_list *timer; + + interval = HZ * 59 / *p; + offset = HZ; + ncpus = num_online_cpus(); + event_scan_interval = ncpus * interval; + for (cpu = 0; cpu < ncpus; ++cpu) { + timer = &per_cpu(heartbeat_timer, cpu); + setup_timer(timer, chrp_event_scan, 0); + timer->expires = jiffies + offset; + add_timer_on(timer, cpu); + offset += interval; + } + printk("RTAS Event Scan Rate: %u (%lu jiffies)\n", + *p, interval); + } + if (ppc_md.progress) ppc_md.progress(" Have fun! ", 0x7777); } -void __init chrp_init(void) +static int __init chrp_probe(void) { + char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(), + "device_type", NULL); + if (dtype == NULL) + return 0; + if (strcmp(dtype, "chrp")) + return 0; + ISA_DMA_THRESHOLD = ~0L; DMA_MODE_READ = 0x44; DMA_MODE_WRITE = 0x48; @@ -491,26 +526,24 @@ void __init chrp_init(void) /* Assume we have an 8259... */ __irq_offset_value = NUM_ISA_INTERRUPTS; - ppc_md.setup_arch = chrp_setup_arch; - ppc_md.show_cpuinfo = chrp_show_cpuinfo; - - ppc_md.init_IRQ = chrp_init_IRQ; - ppc_md.init = chrp_init2; - - ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; - - ppc_md.restart = rtas_restart; - ppc_md.power_off = rtas_power_off; - ppc_md.halt = rtas_halt; - - ppc_md.time_init = chrp_time_init; - ppc_md.calibrate_decr = generic_calibrate_decr; - - /* this may get overridden with rtas routines later... */ - ppc_md.set_rtc_time = chrp_set_rtc_time; - ppc_md.get_rtc_time = chrp_get_rtc_time; - -#ifdef CONFIG_SMP - smp_ops = &chrp_smp_ops; -#endif /* CONFIG_SMP */ + return 1; } + +define_machine(chrp) { + .name = "CHRP", + .probe = chrp_probe, + .setup_arch = chrp_setup_arch, + .init = chrp_init2, + .show_cpuinfo = chrp_show_cpuinfo, + .init_IRQ = chrp_init_IRQ, + .get_irq = mpic_get_irq, + .pcibios_fixup = chrp_pcibios_fixup, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .time_init = chrp_time_init, + .set_rtc_time = chrp_set_rtc_time, + .get_rtc_time = chrp_get_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .phys_mem_access_prot = pci_phys_mem_access_prot, +};