{
int port1;
unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2;
+ u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
/* if hub supports power switching, enable power on each port */
- if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) < 2) {
+ if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2) {
dev_dbg(hub->intfdev, "enabling power on all ports\n");
for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++)
set_port_feature(hub->hdev, port1,
msleep(max(pgood_delay, (unsigned) 100));
}
-static void hub_quiesce(struct usb_hub *hub)
+static inline void __hub_quiesce(struct usb_hub *hub)
{
- /* stop khubd and related activity */
+ /* (nonblocking) khubd and related activity won't re-trigger */
hub->quiescing = 1;
hub->activating = 0;
+ hub->resume_root_hub = 0;
+}
+
+static void hub_quiesce(struct usb_hub *hub)
+{
+ /* (blocking) stop khubd and related activity */
+ __hub_quiesce(hub);
usb_kill_urb(hub->urb);
if (hub->has_indicators)
cancel_delayed_work(&hub->leds);
hub->quiescing = 0;
hub->activating = 1;
+ hub->resume_root_hub = 0;
status = usb_submit_urb(hub->urb, GFP_NOIO);
if (status < 0)
dev_err(hub->intfdev, "activate --> %d\n", status);
struct usb_device *hdev = hub->hdev;
struct device *hub_dev = hub->intfdev;
u16 hubstatus, hubchange;
+ u16 wHubCharacteristics;
unsigned int pipe;
int maxp, ret;
char *message;
dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild,
(hdev->maxchild == 1) ? "" : "s");
- le16_to_cpus(&hub->descriptor->wHubCharacteristics);
+ wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
- if (hub->descriptor->wHubCharacteristics & HUB_CHAR_COMPOUND) {
+ if (wHubCharacteristics & HUB_CHAR_COMPOUND) {
int i;
char portstr [USB_MAXCHILDREN + 1];
} else
dev_dbg(hub_dev, "standalone hub\n");
- switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) {
+ switch (wHubCharacteristics & HUB_CHAR_LPSM) {
case 0x00:
dev_dbg(hub_dev, "ganged power switching\n");
break;
break;
}
- switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) {
+ switch (wHubCharacteristics & HUB_CHAR_OCPM) {
case 0x00:
dev_dbg(hub_dev, "global over-current protection\n");
break;
}
/* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
- switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_TTTT) {
+ switch (wHubCharacteristics & HUB_CHAR_TTTT) {
case HUB_TTTT_8_BITS:
if (hdev->descriptor.bDeviceProtocol != 0) {
hub->tt.think_time = 666;
}
/* probe() zeroes hub->indicator[] */
- if (hub->descriptor->wHubCharacteristics & HUB_CHAR_PORTIND) {
+ if (wHubCharacteristics & HUB_CHAR_PORTIND) {
hub->has_indicators = 1;
dev_dbg(hub_dev, "Port indicators are supported\n");
}
(hubstatus & HUB_STATUS_LOCAL_POWER)
? "lost (inactive)" : "good");
- if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) == 0)
+ if ((wHubCharacteristics & HUB_CHAR_OCPM) == 0)
dev_dbg(hub_dev, "%sover-current condition exists\n",
(hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no ");
*/
usb_disable_device(udev, 0);
+ usb_notify_remove_device(udev);
+
/* Free the device number, remove the /proc/bus/usb entry and
* the sysfs attributes, and delete the parent's children[]
* (or root_hub) pointer.
*/
dev_dbg (&udev->dev, "unregistering device\n");
release_address(udev);
- usbfs_remove_device(udev);
- usbdev_remove(udev);
usb_remove_sysfs_dev_files(udev);
/* Avoid races with recursively_mark_NOTATTACHED() */
}
/* USB device state == configured ... usable */
+ usb_notify_add_device(udev);
- /* add a /proc/bus/usb entry */
- usbdev_add(udev);
- usbfs_add_device(udev);
return 0;
fail:
*/
static int __usb_suspend_device (struct usb_device *udev, int port1)
{
- int status;
+ int status = 0;
/* caller owns the udev device lock */
if (port1 < 0)
}
}
- /* "global suspend" of the HC-to-USB interface (root hub), or
- * "selective suspend" of just one hub-device link.
+ /* we only change a device's upstream USB link.
+ * root hubs have no upstream USB link.
*/
- if (!udev->parent) {
- struct usb_bus *bus = udev->bus;
- if (bus && bus->op->hub_suspend) {
- status = bus->op->hub_suspend (bus);
- if (status == 0) {
- dev_dbg(&udev->dev, "usb suspend\n");
- usb_set_device_state(udev,
- USB_STATE_SUSPENDED);
- }
- } else
- status = -EOPNOTSUPP;
- } else
+ if (udev->parent)
status = hub_port_suspend(hdev_to_hub(udev->parent), port1,
udev);
return status;
}
-/**
+#endif
+
+/*
* usb_suspend_device - suspend a usb device
* @udev: device that's no longer in active use
- * Context: must be able to sleep; device not locked
+ * Context: must be able to sleep; device not locked; pm locks held
*
* Suspends a USB device that isn't in active use, conserving power.
* Devices may wake out of a suspend, if anything important happens,
*/
int usb_suspend_device(struct usb_device *udev)
{
+#ifdef CONFIG_USB_SUSPEND
int port1, status;
port1 = locktree(udev);
status = __usb_suspend_device(udev, port1);
usb_unlock_device(udev);
return status;
+#else
+ /* NOTE: udev->state unchanged, it's not lying ... */
+ udev->dev.power.power_state = PMSG_SUSPEND;
+ return 0;
+#endif
}
+
/*
* If the USB "suspend" state is in use (rather than "global suspend"),
* many devices will be individually taken out of suspend state using
* resume (by host) or remote wakeup (by device) ... now see what changed
* in the tree that's rooted at this device.
*/
-static int finish_port_resume(struct usb_device *udev)
+static int finish_device_resume(struct usb_device *udev)
{
int status;
u16 devstatus;
/* caller owns the udev device lock */
- dev_dbg(&udev->dev, "usb resume\n");
+ dev_dbg(&udev->dev, "finish resume\n");
/* usb ch9 identifies four variants of SUSPENDED, based on what
* state the device resumes to. Linux currently won't see the
usb_set_device_state(udev, udev->actconfig
? USB_STATE_CONFIGURED
: USB_STATE_ADDRESS);
- udev->dev.power.power_state = PMSG_ON;
/* 10.5.4.5 says be sure devices in the tree are still there.
* For now let's assume the device didn't go crazy on resume,
int (*resume)(struct device *);
le16_to_cpus(&devstatus);
- if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
+ if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)
+ && udev->parent) {
status = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
USB_REQ_CLEAR_FEATURE,
return status;
}
+#ifdef CONFIG_USB_SUSPEND
+
static int
hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
{
/* TRSMRCY = 10 msec */
msleep(10);
if (udev)
- status = finish_port_resume(udev);
+ status = finish_device_resume(udev);
}
}
if (status < 0)
return status;
}
-static int hub_resume (struct usb_interface *intf);
+#endif
-/**
+/*
* usb_resume_device - re-activate a suspended usb device
* @udev: device to re-activate
- * Context: must be able to sleep; device not locked
+ * Context: must be able to sleep; device not locked; pm locks held
*
* This will re-activate the suspended device, increasing power usage
* while letting drivers communicate again with its endpoints.
if (port1 < 0)
return port1;
- /* "global resume" of the HC-to-USB interface (root hub), or
- * selective resume of one hub-to-device port
- */
- if (!udev->parent) {
- struct usb_bus *bus = udev->bus;
- if (bus && bus->op->hub_resume) {
- status = bus->op->hub_resume (bus);
+#ifdef CONFIG_USB_SUSPEND
+ /* selective resume of one downstream hub-to-device port */
+ if (udev->parent) {
+ if (udev->state == USB_STATE_SUSPENDED) {
+ // NOTE swsusp may bork us, device state being wrong...
+ // NOTE this fails if parent is also suspended...
+ status = hub_port_resume(hdev_to_hub(udev->parent),
+ port1, udev);
} else
- status = -EOPNOTSUPP;
- if (status == 0) {
- dev_dbg(&udev->dev, "usb resume\n");
- /* TRSMRCY = 10 msec */
- msleep(10);
- usb_set_device_state (udev, USB_STATE_CONFIGURED);
- udev->dev.power.power_state = PMSG_ON;
- status = hub_resume (udev
- ->actconfig->interface[0]);
- }
- } else if (udev->state == USB_STATE_SUSPENDED) {
- // NOTE this fails if parent is also suspended...
- status = hub_port_resume(hdev_to_hub(udev->parent),
- port1, udev);
- } else {
- status = 0;
- }
- if (status < 0) {
+ status = 0;
+ } else
+#endif
+ status = finish_device_resume(udev);
+ if (status < 0)
dev_dbg(&udev->dev, "can't resume, status %d\n",
status);
- }
usb_unlock_device(udev);
{
int status = 0;
+#ifdef CONFIG_USB_SUSPEND
+
/* don't repeat RESUME sequence if this device
* was already woken up by some other task
*/
dev_dbg(&udev->dev, "RESUME (wakeup)\n");
/* TRSMRCY = 10 msec */
msleep(10);
- status = finish_port_resume(udev);
+ status = finish_device_resume(udev);
}
up(&udev->serialize);
+#endif
return status;
}
struct usb_device *udev;
udev = hdev->children [port1-1];
- if (udev && udev->state != USB_STATE_SUSPENDED) {
+ if (udev && (udev->dev.power.power_state.event
+ == PM_EVENT_ON
+#ifdef CONFIG_USB_SUSPEND
+ || udev->state != USB_STATE_SUSPENDED
+#endif
+ )) {
dev_dbg(&intf->dev, "port %d nyet suspended\n", port1);
return -EBUSY;
}
}
+ /* "global suspend" of the downstream HC-to-USB interface */
+ if (!hdev->parent) {
+ struct usb_bus *bus = hdev->bus;
+ if (bus) {
+ int status = hcd_bus_suspend (bus);
+
+ if (status != 0) {
+ dev_dbg(&hdev->dev, "'global' suspend %d\n",
+ status);
+ return status;
+ }
+ } else
+ return -EOPNOTSUPP;
+ }
+
/* stop khubd and related activity */
hub_quiesce(hub);
return 0;
{
struct usb_device *hdev = interface_to_usbdev(intf);
struct usb_hub *hub = usb_get_intfdata (intf);
- unsigned port1;
int status;
+ /* "global resume" of the downstream HC-to-USB interface */
+ if (!hdev->parent) {
+ struct usb_bus *bus = hdev->bus;
+ if (bus) {
+ status = hcd_bus_resume (bus);
+ if (status) {
+ dev_dbg(&intf->dev, "'global' resume %d\n",
+ status);
+ return status;
+ }
+ } else
+ return -EOPNOTSUPP;
+ if (status == 0) {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+ }
+ }
+
+ hub_activate(hub);
+
+ /* REVISIT: this recursion probably shouldn't exist. Remove
+ * this code sometime, after retesting with different root and
+ * external hubs.
+ */
+#ifdef CONFIG_USB_SUSPEND
+ {
+ unsigned port1;
+
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
struct usb_device *udev;
u16 portstat, portchange;
if (portstat & USB_PORT_STAT_SUSPEND)
status = hub_port_resume(hub, port1, udev);
else {
- status = finish_port_resume(udev);
+ status = finish_device_resume(udev);
if (status < 0) {
dev_dbg(&intf->dev, "resume port %d --> %d\n",
port1, status);
}
up(&udev->serialize);
}
- hub->resume_root_hub = 0;
- hub_activate(hub);
+ }
+#endif
return 0;
}
-void usb_resume_root_hub(struct usb_device *hdev)
+void usb_suspend_root_hub(struct usb_device *hdev)
{
struct usb_hub *hub = hdev_to_hub(hdev);
- hub->resume_root_hub = 1;
- kick_khubd(hub);
+ /* This also makes any led blinker stop retriggering. We're called
+ * from irq, so the blinker might still be scheduled. Caller promises
+ * that the root hub status URB will be canceled.
+ */
+ __hub_quiesce(hub);
+ mark_quiesced(to_usb_interface(hub->intfdev));
}
-#else /* !CONFIG_USB_SUSPEND */
-
-int usb_suspend_device(struct usb_device *udev)
+void usb_resume_root_hub(struct usb_device *hdev)
{
- /* state does NOT lie by saying it's USB_STATE_SUSPENDED! */
- return 0;
-}
+ struct usb_hub *hub = hdev_to_hub(hdev);
-int usb_resume_device(struct usb_device *udev)
-{
- udev->dev.power.power_state.event = PM_EVENT_ON;
- return 0;
+ hub->resume_root_hub = 1;
+ kick_khubd(hub);
}
-#define hub_suspend NULL
-#define hub_resume NULL
-#define remote_wakeup(x) 0
-
-#endif /* CONFIG_USB_SUSPEND */
-
-EXPORT_SYMBOL(usb_suspend_device);
-EXPORT_SYMBOL(usb_resume_device);
-
-
/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
*
{
struct usb_device *hdev = hub->hdev;
struct device *hub_dev = hub->intfdev;
+ u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
int status, i;
dev_dbg (hub_dev,
if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
/* maybe switch power back on (e.g. root hub was reset) */
- if ((hub->descriptor->wHubCharacteristics
- & HUB_CHAR_LPSM) < 2
+ if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
intf = to_usb_interface(hub->intfdev);
hub_dev = &intf->dev;
- dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
+ i = hub->resume_root_hub;
+
+ dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x%s\n",
hdev->state, hub->descriptor
? hub->descriptor->bNbrPorts
: 0,
/* NOTE: expects max 15 ports... */
(u16) hub->change_bits[0],
- (u16) hub->event_bits[0]);
+ (u16) hub->event_bits[0],
+ i ? ", resume root" : "");
usb_get_intf(intf);
- i = hub->resume_root_hub;
spin_unlock_irq(&hub_event_lock);
- /* Is this is a root hub wanting to be resumed? */
- if (i)
- usb_resume_device(hdev);
+ /* Is this is a root hub wanting to reactivate the downstream
+ * ports? If so, be sure the interface resumes even if its
+ * stub "device" node was never suspended.
+ */
+ if (i) {
+ extern void dpm_runtime_resume(struct device *);
+
+ dpm_runtime_resume(&hdev->dev);
+ dpm_runtime_resume(&intf->dev);
+ }
/* Lock the device, then check to see if we were
* disconnected while waiting for the lock to succeed. */
git.samba.org / sfrench / cifs-2.6.git / blobdiff