* This can be done through registers. It is not required since
* a full chip reset is used.
*/
- return (0);
+ return 0;
}
static int my3126_interrupt_enable(struct cphy *cphy)
{
schedule_delayed_work(&cphy->phy_update, HZ/30);
t1_tpi_read(cphy->adapter, A_ELMER0_GPO, &cphy->elmer_gpo);
- return (0);
+ return 0;
}
static int my3126_interrupt_disable(struct cphy *cphy)
{
cancel_rearming_delayed_work(&cphy->phy_update);
- return (0);
+ return 0;
}
static int my3126_interrupt_clear(struct cphy *cphy)
{
- return (0);
+ return 0;
}
#define OFFSET(REG_ADDR) (REG_ADDR << 2)
static int my3126_set_loopback(struct cphy *cphy, int on)
{
- return (0);
+ return 0;
}
/* To check the activity LED */
if (fc)
*fc = PAUSE_RX | PAUSE_TX;
- return (0);
+ return 0;
}
static void my3126_destroy(struct cphy *cphy)
INIT_DELAYED_WORK(&cphy->phy_update, my3216_poll);
cphy->bmsr = 0;
- return (cphy);
+ return cphy;
}
/* Chip Reset */
val |= 0x8000;
t1_tpi_write(adapter, A_ELMER0_GPO, val);
udelay(100);
- return (0);
+ return 0;
}
struct gphy t1_my3126_ops = {