#define BADBLOCK_MARKER_LENGTH 2
#ifdef CONFIG_MTD_NAND_OMAP_BCH
+static u_char bch16_vector[] = {0xf5, 0x24, 0x1c, 0xd0, 0x61, 0xb3, 0xf1, 0x55,
+ 0x2e, 0x2c, 0x86, 0xa3, 0xed, 0x36, 0x1b, 0x78,
+ 0x48, 0x76, 0xa9, 0x3b, 0x97, 0xd1, 0x7a, 0x93,
+ 0x07, 0x0e};
static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc,
0xac, 0x6b, 0xff, 0x99, 0x7b};
static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10};
ecc_size1 = BCH_ECC_SIZE1;
}
break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ bch_type = 0x2;
+ nsectors = chip->ecc.steps;
+ if (mode == NAND_ECC_READ) {
+ wr_mode = 0x01;
+ ecc_size0 = 52; /* ECC bits in nibbles per sector */
+ ecc_size1 = 0; /* non-ECC bits in nibbles per sector */
+ } else {
+ wr_mode = 0x01;
+ ecc_size0 = 0; /* extra bits in nibbles per sector */
+ ecc_size1 = 52; /* OOB bits in nibbles per sector */
+ }
+ break;
default:
return;
}
struct gpmc_nand_regs *gpmc_regs = &info->reg;
u8 *ecc_code;
unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4;
- int i;
+ u32 val;
+ int i, j;
nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
for (i = 0; i < nsectors; i++) {
*ecc_code++ = ((bch_val1 >> 4) & 0xFF);
*ecc_code++ = ((bch_val1 & 0xF) << 4);
break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ val = readl(gpmc_regs->gpmc_bch_result6[i]);
+ ecc_code[0] = ((val >> 8) & 0xFF);
+ ecc_code[1] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result5[i]);
+ ecc_code[2] = ((val >> 24) & 0xFF);
+ ecc_code[3] = ((val >> 16) & 0xFF);
+ ecc_code[4] = ((val >> 8) & 0xFF);
+ ecc_code[5] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result4[i]);
+ ecc_code[6] = ((val >> 24) & 0xFF);
+ ecc_code[7] = ((val >> 16) & 0xFF);
+ ecc_code[8] = ((val >> 8) & 0xFF);
+ ecc_code[9] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result3[i]);
+ ecc_code[10] = ((val >> 24) & 0xFF);
+ ecc_code[11] = ((val >> 16) & 0xFF);
+ ecc_code[12] = ((val >> 8) & 0xFF);
+ ecc_code[13] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result2[i]);
+ ecc_code[14] = ((val >> 24) & 0xFF);
+ ecc_code[15] = ((val >> 16) & 0xFF);
+ ecc_code[16] = ((val >> 8) & 0xFF);
+ ecc_code[17] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result1[i]);
+ ecc_code[18] = ((val >> 24) & 0xFF);
+ ecc_code[19] = ((val >> 16) & 0xFF);
+ ecc_code[20] = ((val >> 8) & 0xFF);
+ ecc_code[21] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result0[i]);
+ ecc_code[22] = ((val >> 24) & 0xFF);
+ ecc_code[23] = ((val >> 16) & 0xFF);
+ ecc_code[24] = ((val >> 8) & 0xFF);
+ ecc_code[25] = ((val >> 0) & 0xFF);
+ break;
default:
return -EINVAL;
}
case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
/* Add constant polynomial to remainder, so that
* ECC of blank pages results in 0x0 on reading back */
- for (i = 0; i < eccbytes; i++)
- ecc_calc[i] ^= bch4_polynomial[i];
+ for (j = 0; j < eccbytes; j++)
+ ecc_calc[j] ^= bch4_polynomial[j];
break;
case OMAP_ECC_BCH4_CODE_HW:
/* Set 8th ECC byte as 0x0 for ROM compatibility */
case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
/* Add constant polynomial to remainder, so that
* ECC of blank pages results in 0x0 on reading back */
- for (i = 0; i < eccbytes; i++)
- ecc_calc[i] ^= bch8_polynomial[i];
+ for (j = 0; j < eccbytes; j++)
+ ecc_calc[j] ^= bch8_polynomial[j];
break;
case OMAP_ECC_BCH8_CODE_HW:
/* Set 14th ECC byte as 0x0 for ROM compatibility */
ecc_calc[eccbytes - 1] = 0x0;
break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ break;
default:
return -EINVAL;
}
return 0;
}
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
/**
* erased_sector_bitflips - count bit flips
* @data: data sector buffer
return flip_bits;
}
-#ifdef CONFIG_MTD_NAND_OMAP_BCH
/**
* omap_elm_correct_data - corrects page data area in case error reported
* @mtd: MTD device structure
actual_eccbytes = ecc->bytes - 1;
erased_ecc_vec = bch8_vector;
break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ actual_eccbytes = ecc->bytes;
+ erased_ecc_vec = bch16_vector;
+ break;
default:
pr_err("invalid driver configuration\n");
return -EINVAL;
/* Check if any error reported */
if (!is_error_reported)
- return 0;
+ return stat;
/* Decode BCH error using ELM module */
elm_decode_bch_error_page(info->elm_dev, ecc_vec, err_vec);
BCH4_BIT_PAD;
break;
case OMAP_ECC_BCH8_CODE_HW:
+ case OMAP_ECC_BCH16_CODE_HW:
pos = err_vec[i].error_loc[j];
break;
default:
goto return_error;
#endif
+ case OMAP_ECC_BCH16_CODE_HW:
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+ pr_info("using OMAP_ECC_BCH16_CODE_HW ECC scheme\n");
+ nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.size = 512;
+ nand_chip->ecc.bytes = 26;
+ nand_chip->ecc.strength = 16;
+ nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
+ nand_chip->ecc.correct = omap_elm_correct_data;
+ nand_chip->ecc.calculate = omap_calculate_ecc_bch;
+ nand_chip->ecc.read_page = omap_read_page_bch;
+ nand_chip->ecc.write_page = omap_write_page_bch;
+ /* This ECC scheme requires ELM H/W block */
+ err = is_elm_present(info, pdata->elm_of_node, BCH16_ECC);
+ if (err < 0) {
+ pr_err("ELM is required for this ECC scheme\n");
+ goto return_error;
+ }
+ /* define ECC layout */
+ ecclayout->eccbytes = nand_chip->ecc.bytes *
+ (mtd->writesize /
+ nand_chip->ecc.size);
+ oob_index = BADBLOCK_MARKER_LENGTH;
+ for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
+ ecclayout->eccpos[i] = oob_index;
+ /* reserved marker already included in ecclayout->eccbytes */
+ ecclayout->oobfree->offset =
+ ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+ break;
+#else
+ pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
+ err = -EINVAL;
+ goto return_error;
+#endif
default:
pr_err("nand: error: invalid or unsupported ECC scheme\n");
err = -EINVAL;
git.samba.org / sfrench / cifs-2.6.git / blobdiff