#define DRIVER_NAME "mxc_nand"
#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35())
-#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27())
+#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
/* Addresses for NFC registers */
#define NFC_BUF_SIZE 0xE00
{
struct mxc_nand_host *host = dev_id;
- uint16_t tmp;
-
- tmp = readw(host->regs + NFC_CONFIG1);
- tmp |= NFC_INT_MSK; /* Disable interrupt */
- writew(tmp, host->regs + NFC_CONFIG1);
+ disable_irq_nosync(irq);
wake_up(&host->irq_waitq);
*/
static void wait_op_done(struct mxc_nand_host *host, int useirq)
{
- uint32_t tmp;
- int max_retries = 2000;
+ uint16_t tmp;
+ int max_retries = 8000;
if (useirq) {
if ((readw(host->regs + NFC_CONFIG2) & NFC_INT) == 0) {
- tmp = readw(host->regs + NFC_CONFIG1);
- tmp &= ~NFC_INT_MSK; /* Enable interrupt */
- writew(tmp, host->regs + NFC_CONFIG1);
+ enable_irq(host->irq);
wait_event(host->irq_waitq,
readw(host->regs + NFC_CONFIG2) & NFC_INT);
writew(cmd, host->regs + NFC_FLASH_CMD);
writew(NFC_CMD, host->regs + NFC_CONFIG2);
- /* Wait for operation to complete */
- wait_op_done(host, useirq);
+ if (cpu_is_mx21() && (cmd == NAND_CMD_RESET)) {
+ int max_retries = 100;
+ /* Reset completion is indicated by NFC_CONFIG2 */
+ /* being set to 0 */
+ while (max_retries-- > 0) {
+ if (readw(host->regs + NFC_CONFIG2) == 0) {
+ break;
+ }
+ udelay(1);
+ }
+ if (max_retries < 0)
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: RESET failed\n",
+ __func__);
+ } else {
+ /* Wait for operation to complete */
+ wait_op_done(host, useirq);
+ }
}
/* This function sends an address (or partial address) to the
}
}
+static void preset(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint16_t tmp;
+
+ /* enable interrupt, disable spare enable */
+ tmp = readw(host->regs + NFC_CONFIG1);
+ tmp &= ~NFC_INT_MSK;
+ tmp &= ~NFC_SP_EN;
+ if (nand_chip->ecc.mode == NAND_ECC_HW) {
+ tmp |= NFC_ECC_EN;
+ } else {
+ tmp &= ~NFC_ECC_EN;
+ }
+ writew(tmp, host->regs + NFC_CONFIG1);
+ /* preset operation */
+
+ /* Unlock the internal RAM Buffer */
+ writew(0x2, host->regs + NFC_CONFIG);
+
+ /* Blocks to be unlocked */
+ if (nfc_is_v21()) {
+ writew(0x0, host->regs + NFC_V21_UNLOCKSTART_BLKADDR);
+ writew(0xffff, host->regs + NFC_V21_UNLOCKEND_BLKADDR);
+ } else if (nfc_is_v1()) {
+ writew(0x0, host->regs + NFC_V1_UNLOCKSTART_BLKADDR);
+ writew(0x4000, host->regs + NFC_V1_UNLOCKEND_BLKADDR);
+ } else
+ BUG();
+
+ /* Unlock Block Command for given address range */
+ writew(0x4, host->regs + NFC_WRPROT);
+}
+
/* Used by the upper layer to write command to NAND Flash for
* different operations to be carried out on NAND Flash */
static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
/* Command pre-processing step */
switch (command) {
+ case NAND_CMD_RESET:
+ send_cmd(host, command, false);
+ preset(mtd);
+ break;
case NAND_CMD_STATUS:
host->buf_start = 0;
else
host->buf_start = column + mtd->writesize;
- if (mtd->writesize > 512)
- command = NAND_CMD_READ0; /* only READ0 is valid */
+ command = NAND_CMD_READ0; /* only READ0 is valid */
send_cmd(host, command, false);
mxc_do_addr_cycle(mtd, column, page_addr);
break;
case NAND_CMD_SEQIN:
- if (column >= mtd->writesize) {
- /*
- * FIXME: before send SEQIN command for write OOB,
- * We must read one page out.
- * For K9F1GXX has no READ1 command to set current HW
- * pointer to spare area, we must write the whole page
- * including OOB together.
- */
- if (mtd->writesize > 512)
- /* call ourself to read a page */
- mxc_nand_command(mtd, NAND_CMD_READ0, 0,
- page_addr);
-
- host->buf_start = column;
-
- /* Set program pointer to spare region */
- if (mtd->writesize == 512)
- send_cmd(host, NAND_CMD_READOOB, false);
- } else {
- host->buf_start = column;
+ if (column >= mtd->writesize)
+ /* call ourself to read a page */
+ mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr);
- /* Set program pointer to page start */
- if (mtd->writesize == 512)
- send_cmd(host, NAND_CMD_READ0, false);
- }
+ host->buf_start = column;
send_cmd(host, command, false);
mxc_do_addr_cycle(mtd, column, page_addr);
struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
struct mxc_nand_host *host;
struct resource *res;
- uint16_t tmp;
int err = 0, nr_parts = 0;
struct nand_ecclayout *oob_smallpage, *oob_largepage;
host->spare_len = 64;
oob_smallpage = &nandv2_hw_eccoob_smallpage;
oob_largepage = &nandv2_hw_eccoob_largepage;
+ this->ecc.bytes = 9;
} else if (nfc_is_v1()) {
host->regs = host->base;
host->spare0 = host->base + 0x800;
host->spare_len = 16;
oob_smallpage = &nandv1_hw_eccoob_smallpage;
oob_largepage = &nandv1_hw_eccoob_largepage;
- } else
- BUG();
-
- /* disable interrupt and spare enable */
- tmp = readw(host->regs + NFC_CONFIG1);
- tmp |= NFC_INT_MSK;
- tmp &= ~NFC_SP_EN;
- writew(tmp, host->regs + NFC_CONFIG1);
-
- init_waitqueue_head(&host->irq_waitq);
-
- host->irq = platform_get_irq(pdev, 0);
-
- err = request_irq(host->irq, mxc_nfc_irq, 0, DRIVER_NAME, host);
- if (err)
- goto eirq;
-
- /* Reset NAND */
- this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-
- /* preset operation */
- /* Unlock the internal RAM Buffer */
- writew(0x2, host->regs + NFC_CONFIG);
-
- /* Blocks to be unlocked */
- if (nfc_is_v21()) {
- writew(0x0, host->regs + NFC_V21_UNLOCKSTART_BLKADDR);
- writew(0xffff, host->regs + NFC_V21_UNLOCKEND_BLKADDR);
- this->ecc.bytes = 9;
- } else if (nfc_is_v1()) {
- writew(0x0, host->regs + NFC_V1_UNLOCKSTART_BLKADDR);
- writew(0x4000, host->regs + NFC_V1_UNLOCKEND_BLKADDR);
this->ecc.bytes = 3;
} else
BUG();
- /* Unlock Block Command for given address range */
- writew(0x4, host->regs + NFC_WRPROT);
-
this->ecc.size = 512;
this->ecc.layout = oob_smallpage;
this->ecc.hwctl = mxc_nand_enable_hwecc;
this->ecc.correct = mxc_nand_correct_data;
this->ecc.mode = NAND_ECC_HW;
- tmp = readw(host->regs + NFC_CONFIG1);
- tmp |= NFC_ECC_EN;
- writew(tmp, host->regs + NFC_CONFIG1);
} else {
this->ecc.mode = NAND_ECC_SOFT;
- tmp = readw(host->regs + NFC_CONFIG1);
- tmp &= ~NFC_ECC_EN;
- writew(tmp, host->regs + NFC_CONFIG1);
}
/* NAND bus width determines access funtions used by upper layer */
this->options |= NAND_USE_FLASH_BBT;
}
+ init_waitqueue_head(&host->irq_waitq);
+
+ host->irq = platform_get_irq(pdev, 0);
+
+ err = request_irq(host->irq, mxc_nfc_irq, IRQF_DISABLED, DRIVER_NAME, host);
+ if (err)
+ goto eirq;
+
/* first scan to find the device and get the page size */
- if (nand_scan_ident(mtd, 1)) {
+ if (nand_scan_ident(mtd, 1, NULL)) {
err = -ENXIO;
goto escan;
}
parse_mtd_partitions(mtd, part_probes, &host->parts, 0);
if (nr_parts > 0)
add_mtd_partitions(mtd, host->parts, nr_parts);
+ else if (pdata->parts)
+ add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
else
#endif
{
int ret = 0;
DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
- if (mtd) {
- ret = mtd->suspend(mtd);
- /* Disable the NFC clock */
- clk_disable(host->clk);
- }
+
+ ret = mtd->suspend(mtd);
+
+ /*
+ * nand_suspend locks the device for exclusive access, so
+ * the clock must already be off.
+ */
+ BUG_ON(!ret && host->clk_act);
return ret;
}
DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
- if (mtd) {
- /* Enable the NFC clock */
- clk_enable(host->clk);
- mtd->resume(mtd);
- }
+ mtd->resume(mtd);
return ret;
}
git.samba.org / sfrench / cifs-2.6.git / blobdiff