module_param(audio_debug, int, 0644);
MODULE_PARM_DESC(audio_debug, "enable debug messages [audio]");
+static unsigned int always_analog = 0;
+module_param(always_analog,int,0644);
+MODULE_PARM_DESC(always_analog,"force analog audio out");
+
+
#define dprintk(fmt, arg...) if (audio_debug) \
printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg)
{
u32 volume;
+#ifndef USING_CX88_ALSA
/* restart dma; This avoids buzz in NICAM and is good in others */
cx88_stop_audio_dma(core);
+#endif
cx_write(AUD_RATE_THRES_DMD, 0x000000C0);
+#ifndef USING_CX88_ALSA
cx88_start_audio_dma(core);
+#endif
if (cx88_boards[core->board].blackbird) {
/* sets sound input from external adc */
- cx_set(AUD_CTL, EN_I2SIN_ENABLE);
+ if (core->board == CX88_BOARD_HAUPPAUGE_ROSLYN)
+ cx_clear(AUD_CTL, EN_I2SIN_ENABLE);
+ else
+ cx_set(AUD_CTL, EN_I2SIN_ENABLE);
+
cx_write(AUD_I2SINPUTCNTL, 4);
cx_write(AUD_BAUDRATE, 1);
/* 'pass-thru mode': this enables the i2s output to the mpeg encoder */
cx_write(AUD_I2SOUTPUTCNTL, 1);
cx_write(AUD_I2SCNTL, 0);
/* cx_write(AUD_APB_IN_RATE_ADJ, 0); */
- } else {
+ }
+ if ((always_analog) || (!cx88_boards[core->board].blackbird)) {
ctl |= EN_DAC_ENABLE;
cx_write(AUD_CTL, ctl);
}
set_audio_standard_BTSC(core, 1, EN_BTSC_FORCE_SAP);
break;
case V4L2_TUNER_MODE_STEREO:
+ case V4L2_TUNER_MODE_LANG1_LANG2:
set_audio_standard_BTSC(core, 0, EN_BTSC_FORCE_STEREO);
break;
}
EN_NICAM_FORCE_MONO2);
break;
case V4L2_TUNER_MODE_STEREO:
+ case V4L2_TUNER_MODE_LANG1_LANG2:
set_audio_standard_NICAM(core,
EN_NICAM_FORCE_STEREO);
break;
EN_A2_FORCE_MONO2);
break;
case V4L2_TUNER_MODE_STEREO:
+ case V4L2_TUNER_MODE_LANG1_LANG2:
set_audio_standard_A2(core,
EN_A2_FORCE_STEREO);
break;