Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6

[sfrench/cifs-2.6.git] / drivers / ata / pata_hpt3x3.c

diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index f11a320337c00c52415b453d8e7638e3f6bda447..7e310253b36b46e2297c31d67a81927466faac13 100644 (file)
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -23,7 +23,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "pata_hpt3x3"
-#define DRV_VERSION    "0.5.3"
+#define DRV_VERSION    "0.6.1"
 
 /**
  *     hpt3x3_set_piomode              -       PIO setup
@@ -80,14 +80,48 @@ static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev)
        r2 &= ~(0x11 << dn);    /* Clear MWDMA and UDMA bits */
 
        if (adev->dma_mode >= XFER_UDMA_0)
-               r2 |= (0x10 << dn);     /* Ultra mode */
+               r2 |= (0x01 << dn);     /* Ultra mode */
        else
-               r2 |= (0x01 << dn);     /* MWDMA */
+               r2 |= (0x10 << dn);     /* MWDMA */
 
        pci_write_config_dword(pdev, 0x44, r1);
        pci_write_config_dword(pdev, 0x48, r2);
 }
-#endif /* CONFIG_PATA_HPT3X3_DMA */
+
+/**
+ *     hpt3x3_freeze           -       DMA workaround
+ *     @ap: port to freeze
+ *
+ *     When freezing an HPT3x3 we must stop any pending DMA before
+ *     writing to the control register or the chip will hang
+ */
+
+static void hpt3x3_freeze(struct ata_port *ap)
+{
+       void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+       iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ ATA_DMA_START,
+                       mmio + ATA_DMA_CMD);
+       ata_sff_dma_pause(ap);
+       ata_sff_freeze(ap);
+}
+
+/**
+ *     hpt3x3_bmdma_setup      -       DMA workaround
+ *     @qc: Queued command
+ *
+ *     When issuing BMDMA we must clean up the error/active bits in
+ *     software on this device
+ */
+
+static void hpt3x3_bmdma_setup(struct ata_queued_cmd *qc)
+{
+       struct ata_port *ap = qc->ap;
+       u8 r = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+       r |= ATA_DMA_INTR | ATA_DMA_ERR;
+       iowrite8(r, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+       return ata_bmdma_setup(qc);
+}
 
 /**
  *     hpt3x3_atapi_dma        -       ATAPI DMA check
@@ -101,18 +135,23 @@ static int hpt3x3_atapi_dma(struct ata_queued_cmd *qc)
        return 1;
 }
 
+#endif /* CONFIG_PATA_HPT3X3_DMA */
+
 static struct scsi_host_template hpt3x3_sht = {
        ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations hpt3x3_port_ops = {
        .inherits       = &ata_bmdma_port_ops,
-       .check_atapi_dma= hpt3x3_atapi_dma,
        .cable_detect   = ata_cable_40wire,
        .set_piomode    = hpt3x3_set_piomode,
 #if defined(CONFIG_PATA_HPT3X3_DMA)
        .set_dmamode    = hpt3x3_set_dmamode,
+       .bmdma_setup    = hpt3x3_bmdma_setup,
+       .check_atapi_dma= hpt3x3_atapi_dma,
+       .freeze         = hpt3x3_freeze,
 #endif
+       
 };
 
 /**
@@ -149,11 +188,11 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
        static int printed_version;
        static const struct ata_port_info info = {
                .flags = ATA_FLAG_SLAVE_POSS,
-               .pio_mask = 0x1f,
+               .pio_mask = ATA_PIO4,
 #if defined(CONFIG_PATA_HPT3X3_DMA)
                /* Further debug needed */
-               .mwdma_mask = 0x07,
-               .udma_mask = 0x07,
+               .mwdma_mask = ATA_MWDMA2,
+               .udma_mask = ATA_UDMA2,
 #endif
                .port_ops = &hpt3x3_port_ops
        };