#include <linux/mc146818rtc.h>
#include <linux/acpi.h>
#include <linux/sysdev.h>
+#ifdef CONFIG_ACPI
+#include <acpi/acpi_bus.h>
+#endif
#include <asm/io.h>
#include <asm/smp.h>
int disable_timer_pin_1 __initdata;
+int timer_over_8254 __initdata = 1;
+
/* Where if anywhere is the i8259 connect in external int mode */
static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
__setup("noapic", disable_ioapic_setup);
__setup("apic", enable_ioapic_setup);
+static int __init setup_disable_8254_timer(char *s)
+{
+ timer_over_8254 = -1;
+ return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+ timer_over_8254 = 2;
+ return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
#include <asm/pci-direct.h>
#include <linux/pci_ids.h>
#include <linux/pci.h>
And another hack to disable the IOMMU on VIA chipsets.
+ ... and others. Really should move this somewhere else.
+
Kludge-O-Rama. */
void __init check_ioapic(void)
{
#endif
/* RED-PEN skip them on mptables too? */
return;
+
+ /* This should be actually default, but
+ for 2.6.16 let's do it for ATI only where
+ it's really needed. */
+ case PCI_VENDOR_ID_ATI:
+ if (timer_over_8254 == 1) {
+ timer_over_8254 = 0;
+ printk(KERN_INFO
+ "ATI board detected. Disabling timer routing over 8254.\n");
+ }
+ return;
}
+
/* No multi-function device? */
type = read_pci_config_byte(num,slot,func,
PCI_HEADER_TYPE);
disable_8259A_irq(0);
/* mask LVT0 */
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
/*
* We use logical delivery to get the timer IRQ
unsigned long v;
v = apic_read(APIC_LVT0);
- apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
+ apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
}
static void disable_lapic_irq (unsigned int irq)
unsigned long v;
v = apic_read(APIC_LVT0);
- apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+ apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
}
static void ack_lapic_irq (unsigned int irq)
* a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
* is so screwy. Thanks to Brian Perkins for testing/hacking this beast
* fanatically on his truly buggy board.
+ *
+ * FIXME: really need to revamp this for modern platforms only.
*/
static inline void check_timer(void)
{
* the 8259A which implies the virtual wire has to be
* disabled in the local APIC.
*/
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
- enable_8259A_irq(0);
+ if (timer_over_8254 > 0)
+ enable_8259A_irq(0);
pin1 = find_isa_irq_pin(0, mp_INT);
apic1 = find_isa_irq_apic(0, mp_INT);
}
printk(" failed.\n");
- if (nmi_watchdog) {
+ if (nmi_watchdog == NMI_IO_APIC) {
printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
nmi_watchdog = 0;
}
disable_8259A_irq(0);
irq_desc[0].handler = &lapic_irq_type;
- apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
+ apic_write(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
enable_8259A_irq(0);
if (timer_irq_works()) {
apic_printk(APIC_QUIET, " works.\n");
return;
}
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
+ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
apic_printk(APIC_VERBOSE," failed.\n");
apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ...");
init_8259A(0);
make_8259A_irq(0);
- apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+ apic_write(APIC_LVT0, APIC_DM_EXTINT);
unlock_ExtINT_logic();
}
-int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
+int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
{
struct IO_APIC_route_entry entry;
unsigned long flags;
entry.delivery_mode = INT_DELIVERY_MODE;
entry.dest_mode = INT_DEST_MODE;
entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
- entry.trigger = edge_level;
- entry.polarity = active_high_low;
+ entry.trigger = triggering;
+ entry.polarity = polarity;
entry.mask = 1; /* Disabled (masked) */
irq = gsi_irq_sharing(irq);
apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
"IRQ %d Mode:%i Active:%i)\n", ioapic,
mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
- edge_level, active_high_low);
+ triggering, polarity);
- ioapic_register_intr(irq, entry.vector, edge_level);
+ ioapic_register_intr(irq, entry.vector, triggering);
if (!ioapic && (irq < 16))
disable_8259A_irq(irq);