#include <linux/efi.h>
#include <linux/init.h>
#include <linux/edd.h>
+#include <linux/iscsi_ibft.h>
#include <linux/nodemask.h>
#include <linux/kexec.h>
#include <linux/crash_dump.h>
#include <asm/io.h>
#include <asm/vmi.h>
#include <setup_arch.h>
-#include <bios_ebda.h>
+#include <asm/bios_ebda.h>
#include <asm/cacheflush.h>
+#include <asm/processor.h>
/* This value is set up by the early boot code to point to the value
immediately after the boot time page tables. It contains a *physical*
struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
EXPORT_SYMBOL(boot_cpu_data);
+unsigned int def_to_bigsmp;
+
#ifndef CONFIG_X86_PAE
unsigned long mmu_cr4_features;
#else
extern void early_cpu_init(void);
extern int root_mountflags;
-unsigned long saved_videomode;
+unsigned long saved_video_mode;
#define RAMDISK_IMAGE_START_MASK 0x07FF
#define RAMDISK_PROMPT_FLAG 0x8000
}
#endif
-int __initdata user_defined_memmap = 0;
+int __initdata user_defined_memmap;
/*
* "mem=nopentium" disables the 4MB page tables.
return max_low_pfn;
}
+#define BIOS_EBDA_SEGMENT 0x40E
+#define BIOS_LOWMEM_KILOBYTES 0x413
+
/*
- * workaround for Dell systems that neglect to reserve EBDA
+ * The BIOS places the EBDA/XBDA at the top of conventional
+ * memory, and usually decreases the reported amount of
+ * conventional memory (int 0x12) too. This also contains a
+ * workaround for Dell systems that neglect to reserve EBDA.
+ * The same workaround also avoids a problem with the AMD768MPX
+ * chipset: reserve a page before VGA to prevent PCI prefetch
+ * into it (errata #56). Usually the page is reserved anyways,
+ * unless you have no PS/2 mouse plugged in.
*/
static void __init reserve_ebda_region(void)
{
- unsigned int addr;
- addr = get_bios_ebda();
- if (addr)
- reserve_bootmem(addr, PAGE_SIZE, BOOTMEM_DEFAULT);
+ unsigned int lowmem, ebda_addr;
+
+ /* To determine the position of the EBDA and the */
+ /* end of conventional memory, we need to look at */
+ /* the BIOS data area. In a paravirtual environment */
+ /* that area is absent. We'll just have to assume */
+ /* that the paravirt case can handle memory setup */
+ /* correctly, without our help. */
+ if (paravirt_enabled())
+ return;
+
+ /* end of low (conventional) memory */
+ lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
+ lowmem <<= 10;
+
+ /* start of EBDA area */
+ ebda_addr = *(unsigned short *)__va(BIOS_EBDA_SEGMENT);
+ ebda_addr <<= 4;
+
+ /* Fixup: bios puts an EBDA in the top 64K segment */
+ /* of conventional memory, but does not adjust lowmem. */
+ if ((lowmem - ebda_addr) <= 0x10000)
+ lowmem = ebda_addr;
+
+ /* Fixup: bios does not report an EBDA at all. */
+ /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
+ if ((ebda_addr == 0) && (lowmem >= 0x9f000))
+ lowmem = 0x9f000;
+
+ /* Paranoia: should never happen, but... */
+ if ((lowmem == 0) || (lowmem >= 0x100000))
+ lowmem = 0x9f000;
+
+ /* reserve all memory between lowmem and the 1MB mark */
+ reserve_bootmem(lowmem, 0x100000 - lowmem, BOOTMEM_DEFAULT);
}
#ifndef CONFIG_NEED_MULTIPLE_NODES
*/
reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT);
- /* reserve EBDA region, it's a 4K region */
+ /* reserve EBDA region */
reserve_ebda_region();
- /* could be an AMD 768MPX chipset. Reserve a page before VGA to prevent
- PCI prefetch into it (errata #56). Usually the page is reserved anyways,
- unless you have no PS/2 mouse plugged in. */
- if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
- boot_cpu_data.x86 == 6)
- reserve_bootmem(0xa0000 - 4096, 4096, BOOTMEM_DEFAULT);
-
#ifdef CONFIG_SMP
/*
* But first pinch a few for the stack/trampoline stuff
#endif
numa_kva_reserve();
reserve_crashkernel();
+
+ reserve_ibft_region();
}
/*
return machine_specific_memory_setup();
}
+#ifdef CONFIG_NUMA
+/*
+ * In the golden day, when everything among i386 and x86_64 will be
+ * integrated, this will not live here
+ */
+void *x86_cpu_to_node_map_early_ptr;
+int x86_cpu_to_node_map_init[NR_CPUS] = {
+ [0 ... NR_CPUS-1] = NUMA_NO_NODE
+};
+DEFINE_PER_CPU(int, x86_cpu_to_node_map) = NUMA_NO_NODE;
+#endif
+
/*
* Determine if we were loaded by an EFI loader. If so, then we have also been
* passed the efi memmap, systab, etc., so we should use these data structures
edid_info = boot_params.edid_info;
apm_info.bios = boot_params.apm_bios_info;
ist_info = boot_params.ist_info;
- saved_videomode = boot_params.hdr.vid_mode;
+ saved_video_mode = boot_params.hdr.vid_mode;
if( boot_params.sys_desc_table.length != 0 ) {
set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
machine_id = boot_params.sys_desc_table.table[0];
efi_init();
/* update e820 for memory not covered by WB MTRRs */
- find_max_pfn();
+ propagate_e820_map();
mtrr_bp_init();
if (mtrr_trim_uncached_memory(max_pfn))
- find_max_pfn();
+ propagate_e820_map();
max_low_pfn = setup_memory();
io_delay_init();
+#ifdef CONFIG_X86_SMP
+ /*
+ * setup to use the early static init tables during kernel startup
+ * X86_SMP will exclude sub-arches that don't deal well with it.
+ */
+ x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init;
+ x86_bios_cpu_apicid_early_ptr = (void *)x86_bios_cpu_apicid_init;
+#ifdef CONFIG_NUMA
+ x86_cpu_to_node_map_early_ptr = (void *)x86_cpu_to_node_map_init;
+#endif
+#endif
+
#ifdef CONFIG_X86_GENERICARCH
generic_apic_probe();
#endif
git.samba.org / sfrench / cifs-2.6.git / blobdiff