*
* The invariant is that, if irq_count != -1, then the IRQ stack is in use.
*/
-.macro ENTER_IRQ_STACK regs=1 old_rsp
+.macro ENTER_IRQ_STACK regs=1 old_rsp save_ret=0
DEBUG_ENTRY_ASSERT_IRQS_OFF
+
+ .if \save_ret
+ /*
+ * If save_ret is set, the original stack contains one additional
+ * entry -- the return address. Therefore, move the address one
+ * entry below %rsp to \old_rsp.
+ */
+ leaq 8(%rsp), \old_rsp
+ .else
movq %rsp, \old_rsp
+ .endif
.if \regs
UNWIND_HINT_REGS base=\old_rsp
.if \regs
UNWIND_HINT_REGS indirect=1
.endif
+
+ .if \save_ret
+ /*
+ * Push the return address to the stack. This return address can
+ * be found at the "real" original RSP, which was offset by 8 at
+ * the beginning of this macro.
+ */
+ pushq -8(\old_rsp)
+ .endif
.endm
/*
.endm
/*
- * Interrupt entry/exit.
- *
- * Interrupt entry points save only callee clobbered registers in fast path.
+ * Interrupt entry helper function.
*
- * Entry runs with interrupts off.
+ * Entry runs with interrupts off. Stack layout at entry:
+ * +----------------------------------------------------+
+ * | regs->ss |
+ * | regs->rsp |
+ * | regs->eflags |
+ * | regs->cs |
+ * | regs->ip |
+ * +----------------------------------------------------+
+ * | regs->orig_ax = ~(interrupt number) |
+ * +----------------------------------------------------+
+ * | return address |
+ * +----------------------------------------------------+
*/
ENTRY(interrupt_entry)
UNWIND_HINT_FUNC
-
- PUSH_AND_CLEAR_REGS save_ret=1
- ENCODE_FRAME_POINTER 8
-
- ret
-END(interrupt_entry)
-
-/* 0(%rsp): ~(interrupt number) */
- .macro interrupt func
+ ASM_CLAC
cld
- testb $3, CS-ORIG_RAX(%rsp)
+ testb $3, CS-ORIG_RAX+8(%rsp)
jz 1f
SWAPGS
- call switch_to_thread_stack
+
+ /*
+ * Switch to the thread stack. The IRET frame and orig_ax are
+ * on the stack, as well as the return address. RDI..R12 are
+ * not (yet) on the stack and space has not (yet) been
+ * allocated for them.
+ */
+ pushq %rdi
+
+ /* Need to switch before accessing the thread stack. */
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi
+ movq %rsp, %rdi
+ movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
+
+ /*
+ * We have RDI, return address, and orig_ax on the stack on
+ * top of the IRET frame. That means offset=24
+ */
+ UNWIND_HINT_IRET_REGS base=%rdi offset=24
+
+ pushq 7*8(%rdi) /* regs->ss */
+ pushq 6*8(%rdi) /* regs->rsp */
+ pushq 5*8(%rdi) /* regs->eflags */
+ pushq 4*8(%rdi) /* regs->cs */
+ pushq 3*8(%rdi) /* regs->ip */
+ pushq 2*8(%rdi) /* regs->orig_ax */
+ pushq 8(%rdi) /* return address */
+ UNWIND_HINT_FUNC
+
+ movq (%rdi), %rdi
1:
- call interrupt_entry
+ PUSH_AND_CLEAR_REGS save_ret=1
+ ENCODE_FRAME_POINTER 8
- testb $3, CS(%rsp)
+ testb $3, CS+8(%rsp)
jz 1f
/*
*
* We need to tell lockdep that IRQs are off. We can't do this until
* we fix gsbase, and we should do it before enter_from_user_mode
- * (which can take locks). Since TRACE_IRQS_OFF idempotent,
+ * (which can take locks). Since TRACE_IRQS_OFF is idempotent,
* the simplest way to handle it is to just call it twice if
* we enter from user mode. There's no reason to optimize this since
* TRACE_IRQS_OFF is a no-op if lockdep is off.
CALL_enter_from_user_mode
1:
- ENTER_IRQ_STACK old_rsp=%rdi
+ ENTER_IRQ_STACK old_rsp=%rdi save_ret=1
/* We entered an interrupt context - irqs are off: */
TRACE_IRQS_OFF
- call \func /* rdi points to pt_regs */
- .endm
+ ret
+END(interrupt_entry)
+
+
+/* Interrupt entry/exit. */
/*
* The interrupt stubs push (~vector+0x80) onto the stack and
*/
.p2align CONFIG_X86_L1_CACHE_SHIFT
common_interrupt:
- ASM_CLAC
addq $-0x80, (%rsp) /* Adjust vector to [-256, -1] range */
- interrupt do_IRQ
+ call interrupt_entry
+ UNWIND_HINT_REGS indirect=1
+ call do_IRQ /* rdi points to pt_regs */
/* 0(%rsp): old RSP */
ret_from_intr:
DISABLE_INTERRUPTS(CLBR_ANY)
.macro apicinterrupt3 num sym do_sym
ENTRY(\sym)
UNWIND_HINT_IRET_REGS
- ASM_CLAC
pushq $~(\num)
.Lcommon_\sym:
- interrupt \do_sym
+ call interrupt_entry
+ UNWIND_HINT_REGS indirect=1
+ call \do_sym /* rdi points to pt_regs */
jmp ret_from_intr
END(\sym)
.endm
*/
#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss_rw) + (TSS_ist + ((x) - 1) * 8)
-/*
- * Switch to the thread stack. This is called with the IRET frame and
- * orig_ax on the stack. (That is, RDI..R12 are not on the stack and
- * space has not been allocated for them.)
- */
-ENTRY(switch_to_thread_stack)
- UNWIND_HINT_FUNC
-
- pushq %rdi
- /* Need to switch before accessing the thread stack. */
- SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi
- movq %rsp, %rdi
- movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
- UNWIND_HINT sp_offset=16 sp_reg=ORC_REG_DI
-
- pushq 7*8(%rdi) /* regs->ss */
- pushq 6*8(%rdi) /* regs->rsp */
- pushq 5*8(%rdi) /* regs->eflags */
- pushq 4*8(%rdi) /* regs->cs */
- pushq 3*8(%rdi) /* regs->ip */
- pushq 2*8(%rdi) /* regs->orig_ax */
- pushq 8(%rdi) /* return address */
- UNWIND_HINT_FUNC
-
- movq (%rdi), %rdi
- ret
-END(switch_to_thread_stack)
-
.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1
ENTRY(\sym)
UNWIND_HINT_IRET_REGS offset=\has_error_code*8
git.samba.org / sfrench / cifs-2.6.git / blobdiff