st %r15,__LC_KERNEL_STACK # set end of kernel stack
ahi %r15,-96
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
-
- l %r14,.Lipl_save_parameters-.LPG1(%r13)
- basr %r14,%r14
#
-# clear bss memory
+# Save ipl parameters, clear bss memory, initialize storage key for kernel pages,
+# and create a kernel NSS if the SAVESYS= parm is defined
#
- l %r2,.Lbss_bgn-.LPG1(%r13) # start of bss
- l %r3,.Lbss_end-.LPG1(%r13) # end of bss
- sr %r3,%r2 # length of bss
- sr %r4,%r4
- sr %r5,%r5 # set src,length and pad to zero
- sr %r0,%r0
- mvcle %r2,%r4,0 # clear mem
- jo .-4 # branch back, if not finish
-
- l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word
-.Lservicecall:
- stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts
-
- stctl %r0, %r0,.Lcr-.LPG1(%r13) # get cr0
- la %r1,0x200 # set bit 22
- o %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1
- st %r1,.Lcr-.LPG1(%r13)
- lctl %r0, %r0,.Lcr-.LPG1(%r13) # load modified cr0
-
- mvc __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw
- la %r1, .Lsclph-.LPG1(%r13)
- a %r1,__LC_EXT_NEW_PSW+4 # set handler
- st %r1,__LC_EXT_NEW_PSW+4
-
- l %r4,.Lsccbaddr-.LPG1(%r13) # %r4 is our index for sccb stuff
- lr %r1,%r4 # our sccb
- .insn rre,0xb2200000,%r2,%r1 # service call
- ipm %r1
- srl %r1,28 # get cc code
- xr %r3, %r3
- chi %r1,3
- be .Lfchunk-.LPG1(%r13) # leave
- chi %r1,2
- be .Lservicecall-.LPG1(%r13)
- lpsw .Lwaitsclp-.LPG1(%r13)
-.Lsclph:
- lh %r1,.Lsccbr-.Lsccb(%r4)
- chi %r1,0x10 # 0x0010 is the sucess code
- je .Lprocsccb # let's process the sccb
- chi %r1,0x1f0
- bne .Lfchunk-.LPG1(%r13) # unhandled error code
- c %r2, .Lrcp-.LPG1(%r13) # Did we try Read SCP forced
- bne .Lfchunk-.LPG1(%r13) # if no, give up
- l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP
- b .Lservicecall-.LPG1(%r13)
-.Lprocsccb:
- lhi %r1,0
- icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0
- jnz .Lscnd
- lhi %r1,0x800 # otherwise report 2GB
-.Lscnd:
- lhi %r3,0x800 # limit reported memory size to 2GB
- cr %r1,%r3
- jl .Lno2gb
- lr %r1,%r3
-.Lno2gb:
- xr %r3,%r3 # same logic
- ic %r3,.Lscpa1-.Lsccb(%r4)
- chi %r3,0x00
- jne .Lcompmem
- l %r3,.Lscpa2-.Lsccb(%r4)
-.Lcompmem:
- mr %r2,%r1 # mem in MB on 128-bit
- l %r1,.Lonemb-.LPG1(%r13)
- mr %r2,%r1 # mem size in bytes in %r3
- b .Lfchunk-.LPG1(%r13)
-
- .align 4
-.Lipl_save_parameters:
- .long ipl_save_parameters
-.Linittu:
- .long init_thread_union
-.Lpmask:
- .byte 0
- .align 8
-.Lpcext:.long 0x00080000,0x80000000
-.Lcr:
- .long 0x00 # place holder for cr0
- .align 8
-.Lwaitsclp:
- .long 0x010a0000,0x80000000 + .Lsclph
-.Lrcp:
- .int 0x00120001 # Read SCP forced code
-.Lrcp2:
- .int 0x00020001 # Read SCP code
-.Lonemb:
- .int 0x100000
-.Lfchunk:
+ l %r14,.Lstartup_init-.LPG1(%r13)
+ basr %r14,%r14
-#
-# find memory chunks.
-#
- lr %r9,%r3 # end of mem
- mvc __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13)
- la %r1,1 # test in increments of 128KB
- sll %r1,17
- l %r3,.Lmchunk-.LPG1(%r13) # get pointer to memory_chunk array
- slr %r4,%r4 # set start of chunk to zero
- slr %r5,%r5 # set end of chunk to zero
- slr %r6,%r6 # set access code to zero
- la %r10,MEMORY_CHUNKS # number of chunks
-.Lloop:
- tprot 0(%r5),0 # test protection of first byte
- ipm %r7
- srl %r7,28
- clr %r6,%r7 # compare cc with last access code
- be .Lsame-.LPG1(%r13)
- lhi %r8,0 # no program checks
- b .Lsavchk-.LPG1(%r13)
-.Lsame:
- ar %r5,%r1 # add 128KB to end of chunk
- bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop
-.Lchkmem: # > 2GB or tprot got a program check
- lhi %r8,1 # set program check flag
-.Lsavchk:
- clr %r4,%r5 # chunk size > 0?
- be .Lchkloop-.LPG1(%r13)
- st %r4,0(%r3) # store start address of chunk
- lr %r0,%r5
- slr %r0,%r4
- st %r0,4(%r3) # store size of chunk
- st %r6,8(%r3) # store type of chunk
- la %r3,12(%r3)
- ahi %r10,-1 # update chunk number
-.Lchkloop:
- lr %r6,%r7 # set access code to last cc
- # we got an exception or we're starting a new
- # chunk , we must check if we should
- # still try to find valid memory (if we detected
- # the amount of available storage), and if we
- # have chunks left
- xr %r0,%r0
- clr %r0,%r9 # did we detect memory?
- je .Ldonemem # if not, leave
- chi %r10,0 # do we have chunks left?
- je .Ldonemem
- chi %r8,1 # program check ?
- je .Lpgmchk
- lr %r4,%r5 # potential new chunk
- alr %r5,%r1 # add 128KB to end of chunk
- j .Llpcnt
-.Lpgmchk:
- alr %r5,%r1 # add 128KB to end of chunk
- lr %r4,%r5 # potential new chunk
-.Llpcnt:
- clr %r5,%r9 # should we go on?
- jl .Lloop
-.Ldonemem:
l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags
-#
-# find out if we are running under VM
-#
- stidp __LC_CPUID # store cpuid
- tm __LC_CPUID,0xff # running under VM ?
- bno .Lnovm-.LPG1(%r13)
- oi 3(%r12),1 # set VM flag
-.Lnovm:
- lh %r0,__LC_CPUID+4 # get cpu version
- chi %r0,0x7490 # running on a P/390 ?
- bne .Lnop390-.LPG1(%r13)
- oi 3(%r12),4 # set P/390 flag
-.Lnop390:
-
#
# find out if we have an IEEE fpu
#
.long 0 # cr15: linkage stack operations
.Lduct: .long 0,0,0,0,0,0,0,0
.long 0,0,0,0,0,0,0,0
-.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem
.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu
.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp
.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg
.Lbss_bgn: .long __bss_start
.Lbss_end: .long _end
.Lparmaddr: .long PARMAREA
-.Lsccbaddr: .long .Lsccb
-
- .globl ipl_schib
-ipl_schib:
- .rept 13
- .long 0
- .endr
-
- .globl ipl_flags
-ipl_flags:
- .long 0
- .globl ipl_devno
-ipl_devno:
- .word 0
+.Linittu: .long init_thread_union
+.Lstartup_init:
+ .long startup_init
.org 0x12000
-.globl s390_readinfo_sccb
-s390_readinfo_sccb:
-.Lsccb:
- .hword 0x1000 # length, one page
- .byte 0x00,0x00,0x00
- .byte 0x80 # variable response bit set
-.Lsccbr:
- .hword 0x00 # response code
-.Lscpincr1:
- .hword 0x00
-.Lscpa1:
- .byte 0x00
- .fill 89,1,0
-.Lscpa2:
- .int 0x00
-.Lscpincr2:
- .quad 0x00
- .fill 3984,1,0
- .org 0x13000
-
+ .globl _ehead
+_ehead:
#ifdef CONFIG_SHARED_KERNEL
.org 0x100000
#endif
git.samba.org / sfrench / cifs-2.6.git / blobdiff