reg = <0x0 0x0 0x0 0x80000000>;
};
- cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
+ aliases {
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth1;
+ ethernet2 = &cp0_eth2;
+ };
+
+ cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb3h0-vbus";
regulator-min-microvolt = <5000000>;
gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
};
- cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
+ cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb3h1-vbus";
regulator-min-microvolt = <5000000>;
gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
};
- cpm_usb3_0_phy: cpm-usb3-0-phy {
+ cp0_usb3_0_phy: cp0-usb3-0-phy {
compatible = "usb-nop-xceiv";
- vcc-supply = <&cpm_reg_usb3_0_vbus>;
+ vcc-supply = <&cp0_reg_usb3_0_vbus>;
};
- cpm_usb3_1_phy: cpm-usb3-1-phy {
+ cp0_usb3_1_phy: cp0-usb3-1-phy {
compatible = "usb-nop-xceiv";
- vcc-supply = <&cpm_reg_usb3_1_vbus>;
+ vcc-supply = <&cp0_reg_usb3_1_vbus>;
};
};
};
-&cpm_pcie2 {
+&cp0_pcie2 {
status = "okay";
};
-&cpm_i2c0 {
+&cp0_i2c0 {
status = "okay";
clock-frequency = <100000>;
};
};
-&cpm_nand {
+&cp0_nand {
/*
* SPI on CPM and NAND have common pins on this board. We can
* use only one at a time. To enable the NAND (whihch will
};
-&cpm_spi1 {
+&cp0_spi1 {
status = "okay";
spi-flash@0 {
};
};
-&cpm_sata0 {
+&cp0_sata0 {
status = "okay";
};
-&cpm_usb3_0 {
- usb-phy = <&cpm_usb3_0_phy>;
+&cp0_usb3_0 {
+ usb-phy = <&cp0_usb3_0_phy>;
status = "okay";
};
-&cpm_usb3_1 {
- usb-phy = <&cpm_usb3_1_phy>;
+&cp0_usb3_1 {
+ usb-phy = <&cp0_usb3_1_phy>;
status = "okay";
};
non-removable;
};
-&cpm_sdhci0 {
+&cp0_sdhci0 {
status = "okay";
bus-width = <4>;
no-1-8-v;
cd-gpios = <&expander0 12 GPIO_ACTIVE_LOW>;
};
-&cpm_mdio {
+&cp0_mdio {
status = "okay";
phy0: ethernet-phy@0 {
};
};
-&cpm_ethernet {
+&cp0_ethernet {
status = "okay";
};
-&cpm_eth0 {
+&cp0_eth0 {
status = "okay";
/* Network PHY */
phy-mode = "10gbase-kr";
/* Generic PHY, providing serdes lanes */
- phys = <&cpm_comphy2 0>;
+ phys = <&cp0_comphy2 0>;
};
-&cpm_eth1 {
+&cp0_eth1 {
status = "okay";
/* Network PHY */
phy = <&phy0>;
phy-mode = "sgmii";
/* Generic PHY, providing serdes lanes */
- phys = <&cpm_comphy0 1>;
+ phys = <&cp0_comphy0 1>;
};
-&cpm_eth2 {
+&cp0_eth2 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";